diff options
Diffstat (limited to 'Documentation/i2c/busses/i2c-ali1535')
| -rw-r--r-- | Documentation/i2c/busses/i2c-ali1535 | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535 deleted file mode 100644 index 5d46342e486a..000000000000 --- a/Documentation/i2c/busses/i2c-ali1535 +++ /dev/null @@ -1,42 +0,0 @@ -Kernel driver i2c-ali1535 - -Supported adapters: - * Acer Labs, Inc. ALI 1535 (south bridge) - Datasheet: Now under NDA - http://www.ali.com.tw/ - -Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - Mark D. Studebaker <mdsxyz123@yahoo.com>, - Dan Eaton <dan.eaton@rocketlogix.com>, - Stephen Rousset<stephen.rousset@rocketlogix.com> - -Description ------------ - -This is the driver for the SMB Host controller on Acer Labs Inc. (ALI) -M1535 South Bridge. - -The M1535 is a South bridge for portable systems. It is very similar to the -M15x3 South bridges also produced by Acer Labs Inc. Some of the registers -within the part have moved and some have been redefined slightly. -Additionally, the sequencing of the SMBus transactions has been modified to -be more consistent with the sequencing recommended by the manufacturer and -observed through testing. These changes are reflected in this driver and -can be identified by comparing this driver to the i2c-ali15x3 driver. For -an overview of these chips see http://www.acerlabs.com - -The SMB controller is part of the M7101 device, which is an ACPI-compliant -Power Management Unit (PMU). - -The whole M7101 device has to be enabled for the SMB to work. You can't -just enable the SMB alone. The SMB and the ACPI have separate I/O spaces. -We make sure that the SMB is enabled. We leave the ACPI alone. - - -Features --------- - -This driver controls the SMB Host only. This driver does not use -interrupts. |