diff options
Diffstat (limited to 'Documentation/i2c')
| -rw-r--r-- | Documentation/i2c/busses/i2c-i801 | 1 | ||||
| -rw-r--r-- | Documentation/i2c/dev-interface | 10 |
2 files changed, 6 insertions, 5 deletions
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index e9c803ea306d..793c83dac738 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -28,6 +28,7 @@ Supported adapters: * Intel Wildcat Point (PCH) * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) + * Intel Sunrise Point-H (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index 3e742ba25536..2ac78ae1039d 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -57,12 +57,12 @@ Well, you are all set up now. You can now use SMBus commands or plain I2C to communicate with your device. SMBus commands are preferred if the device supports them. Both are illustrated below. - __u8 register = 0x10; /* Device register to access */ + __u8 reg = 0x10; /* Device register to access */ __s32 res; char buf[10]; /* Using SMBus commands */ - res = i2c_smbus_read_word_data(file, register); + res = i2c_smbus_read_word_data(file, reg); if (res < 0) { /* ERROR HANDLING: i2c transaction failed */ } else { @@ -70,11 +70,11 @@ the device supports them. Both are illustrated below. } /* Using I2C Write, equivalent of - i2c_smbus_write_word_data(file, register, 0x6543) */ - buf[0] = register; + i2c_smbus_write_word_data(file, reg, 0x6543) */ + buf[0] = reg; buf[1] = 0x43; buf[2] = 0x65; - if (write(file, buf, 3) ! =3) { + if (write(file, buf, 3) != 3) { /* ERROR HANDLING: i2c transaction failed */ } |