diff options
Diffstat (limited to 'Documentation/isdn/README.icn')
| -rw-r--r-- | Documentation/isdn/README.icn | 148 |
1 files changed, 0 insertions, 148 deletions
diff --git a/Documentation/isdn/README.icn b/Documentation/isdn/README.icn deleted file mode 100644 index 13f833d4e910..000000000000 --- a/Documentation/isdn/README.icn +++ /dev/null @@ -1,148 +0,0 @@ -$Id: README.icn,v 1.7 2000/08/06 09:22:51 armin Exp $ - -You can get the ICN-ISDN-card from: - -Thinking Objects Software GmbH -Versbacher Röthe 159 -97078 Würzburg -Tel: +49 931 2877950 -Fax: +49 931 2877951 - -email info@think.de -WWW http:/www.think.de - - -The card communicates with the PC by two interfaces: - 1. A range of 4 successive port-addresses, whose base address can be - configured with the switches. - 2. A memory window with 16KB-256KB size, which can be setup in 16k steps - over the whole range of 16MB. Isdn4linux only uses a 16k window. - The base address of the window can be configured when loading - the lowlevel-module (see README). If using more than one card, - all cards are mapped to the same window and activated as needed. - -Setting up the IO-address dipswitches for the ICN-ISDN-card: - - Two types of cards exist, one with dip-switches and one with - hook-switches. - - 1. Setting for the card with hook-switches: - - (0 = switch closed, 1 = switch open) - - S3 S2 S1 Base-address - 0 0 0 0x300 - 0 0 1 0x310 - 0 1 0 0x320 (Default for isdn4linux) - 0 1 1 0x330 - 1 0 0 0x340 - 1 0 1 0x350 - 1 1 0 0x360 - 1 1 1 NOT ALLOWED! - - 2. Setting for the card with dip-switches: - - (0 = switch closed, 1 = switch open) - - S1 S2 S3 S4 Base-Address - 0 0 0 0 0x300 - 0 0 0 1 0x310 - 0 0 1 0 0x320 (Default for isdn4linux) - 0 0 1 1 0x330 - 0 1 0 0 0x340 - 0 1 0 1 0x350 - 0 1 1 0 0x360 - 0 1 1 1 NOT ALLOWED! - 1 0 0 0 0x308 - 1 0 0 1 0x318 - 1 0 1 0 0x328 - 1 0 1 1 0x338 - 1 1 0 0 0x348 - 1 1 0 1 0x358 - 1 1 1 0 0x368 - 1 1 1 1 NOT ALLOWED! - -The ICN driver may be built into the kernel or as a module. Initialization -depends on how the driver is built: - -Driver built into the kernel: - - The ICN driver can be configured using the commandline-feature while - loading the kernel with LILO or LOADLIN. It accepts the following syntax: - - icn=p,m[,idstring1[,idstring2]] - - where - - p = portbase (default: 0x320) - m = shared memory (default: 0xd0000) - - When using the ICN double card (4B), you MUST define TWO idstrings. - idstring must start with a character! There is no way for the driver - to distinguish between a 2B and 4B type card. Therefore, by supplying - TWO idstrings, you tell the driver that you have a 4B installed. - - If you like to use more than one card, you can use the program - "icnctrl" from the utility-package to configure additional cards. - You need to configure shared memory only once, since the icn-driver - maps all cards into the same address-space. - - Using the "icnctrl"-utility, portbase and shared memory can also be - changed during runtime. - - The D-channel protocol is configured by loading different firmware - into the card's memory using the "icnctrl"-utility. - - -Driver built as module: - - The module icn.o can be configured during "insmod'ing" it by - appending its parameters to the insmod-commandline. The following - syntax is accepted: - - portbase=p membase=m icn_id=idstring [icn_id2=idstring2] - - where p, m, idstring1 and idstring2 have the same meanings as the - parameters described for the kernel-version above. - - When using the ICN double card (4B), you MUST define TWO idstrings. - idstring must start with a character! There is no way for the driver - to distinguish between a 2B and 4B type card. Therefore, by supplying - TWO idstrings, you tell the driver that you have a 4B installed. - - Using the "icnctrl"-utility, the same features apply to the modularized - version like to the kernel-builtin one. - - The D-channel protocol is configured by loading different firmware - into the card's memory using the "icnctrl"-utility. - -Loading the firmware into the card: - - The firmware is supplied together with the isdn4k-utils package. It - can be found in the subdirectory icnctrl/firmware/ - - There are 3 files: - - loadpg.bin - Image of the bootstrap loader. - pc_1t_ca.bin - Image of firmware for german 1TR6 protocol. - pc_eu_ca.bin - Image if firmware for EDSS1 (Euro-ISDN) protocol. - - Assuming you have installed the utility-package correctly, the firmware - will be downloaded into the 2B-card using the following command: - - icnctrl -d Idstring load /etc/isdn/loadpg.bin /etc/isdn/pc_XX_ca.bin - - where XX is either "1t" or "eu", depending on the D-Channel protocol - used on your S0-bus and Idstring is the Name of the card, given during - insmod-time or (for kernel-builtin driver) on the kernel commandline. - - To load a 4B-card, the same command is used, except a second firmware - file is appended to the commandline of icnctrl. - - -> After downloading firmware, the two LEDs at the back cover of the card - (ICN-4B: 4 LEDs) must be blinking intermittently now. If a connection - is up, the corresponding led is lit continuously. - - For further documentation (adding more ICN-cards), refer to the manpage - icnctrl.8 which is included in the isdn4k-utils package. - |