diff options
Diffstat (limited to 'Documentation/media/uapi/v4l/ext-ctrls-codec.rst')
| -rw-r--r-- | Documentation/media/uapi/v4l/ext-ctrls-codec.rst | 1027 |
1 files changed, 1027 insertions, 0 deletions
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst index 4a8446203085..bc5dd8e76567 100644 --- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst +++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst @@ -759,6 +759,32 @@ enum v4l2_mpeg_video_h264_level - +.. _v4l2-mpeg-video-mpeg2-level: + +``V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL`` + (enum) + +enum v4l2_mpeg_video_mpeg2_level - + The level information for the MPEG2 elementary stream. Applicable to + MPEG2 codecs. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW`` + - Low Level (LL) + * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN`` + - Main Level (ML) + * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440`` + - High-1440 Level (H-14) + * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH`` + - High Level (HL) + + + .. _v4l2-mpeg-video-mpeg4-level: ``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL`` @@ -845,6 +871,36 @@ enum v4l2_mpeg_video_h264_profile - +.. _v4l2-mpeg-video-mpeg2-profile: + +``V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE`` + (enum) + +enum v4l2_mpeg_video_mpeg2_profile - + The profile information for MPEG2. Applicable to MPEG2 codecs. + Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE`` + - Simple profile (SP) + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN`` + - Main profile (MP) + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE`` + - SNR Scalable profile (SNR) + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE`` + - Spatially Scalable profile (Spt) + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH`` + - High profile (HP) + * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW`` + - Multi-view profile (MVP) + + + .. _v4l2-mpeg-video-mpeg4-profile: ``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE`` @@ -1395,6 +1451,654 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - Layer number +.. _v4l2-mpeg-h264: + +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)`` + Specifies the sequence parameter set (as extracted from the + bitstream) for the associated H264 slice data. This includes the + necessary parameters for configuring a stateless hardware decoding + pipeline for H264. The bitstream parameters are defined according + to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data + Semantics". For further documentation, refer to the above + specification, unless there is an explicit comment stating + otherwise. + + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_ctrl_h264_sps + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_h264_sps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``profile_idc`` + - + * - __u8 + - ``constraint_set_flags`` + - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>` + * - __u8 + - ``level_idc`` + - + * - __u8 + - ``seq_parameter_set_id`` + - + * - __u8 + - ``chroma_format_idc`` + - + * - __u8 + - ``bit_depth_luma_minus8`` + - + * - __u8 + - ``bit_depth_chroma_minus8`` + - + * - __u8 + - ``log2_max_frame_num_minus4`` + - + * - __u8 + - ``pic_order_cnt_type`` + - + * - __u8 + - ``log2_max_pic_order_cnt_lsb_minus4`` + - + * - __u8 + - ``max_num_ref_frames`` + - + * - __u8 + - ``num_ref_frames_in_pic_order_cnt_cycle`` + - + * - __s32 + - ``offset_for_ref_frame[255]`` + - + * - __s32 + - ``offset_for_non_ref_pic`` + - + * - __s32 + - ``offset_for_top_to_bottom_field`` + - + * - __u16 + - ``pic_width_in_mbs_minus1`` + - + * - __u16 + - ``pic_height_in_map_units_minus1`` + - + * - __u32 + - ``flags`` + - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>` + +.. _h264_sps_constraints_set_flags: + +``Sequence Parameter Set Constraints Set Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG`` + - 0x00000001 + - + * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG`` + - 0x00000002 + - + * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG`` + - 0x00000004 + - + * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG`` + - 0x00000008 + - + * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG`` + - 0x00000010 + - + * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG`` + - 0x00000020 + - + +.. _h264_sps_flags: + +``Sequence Parameter Set Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE`` + - 0x00000001 + - + * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS`` + - 0x00000002 + - + * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO`` + - 0x00000004 + - + * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED`` + - 0x00000008 + - + * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY`` + - 0x00000010 + - + * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD`` + - 0x00000020 + - + * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE`` + - 0x00000040 + - + +``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)`` + Specifies the picture parameter set (as extracted from the + bitstream) for the associated H264 slice data. This includes the + necessary parameters for configuring a stateless hardware decoding + pipeline for H264. The bitstream parameters are defined according + to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP + Semantics". For further documentation, refer to the above + specification, unless there is an explicit comment stating + otherwise. + + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_ctrl_h264_pps + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_h264_pps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``pic_parameter_set_id`` + - + * - __u8 + - ``seq_parameter_set_id`` + - + * - __u8 + - ``num_slice_groups_minus1`` + - + * - __u8 + - ``num_ref_idx_l0_default_active_minus1`` + - + * - __u8 + - ``num_ref_idx_l1_default_active_minus1`` + - + * - __u8 + - ``weighted_bipred_idc`` + - + * - __s8 + - ``pic_init_qp_minus26`` + - + * - __s8 + - ``pic_init_qs_minus26`` + - + * - __s8 + - ``chroma_qp_index_offset`` + - + * - __s8 + - ``second_chroma_qp_index_offset`` + - + * - __u16 + - ``flags`` + - See :ref:`Picture Parameter Set Flags <h264_pps_flags>` + +.. _h264_pps_flags: + +``Picture Parameter Set Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE`` + - 0x00000001 + - + * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT`` + - 0x00000002 + - + * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED`` + - 0x00000004 + - + * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` + - 0x00000008 + - + * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED`` + - 0x00000010 + - + * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT`` + - 0x00000020 + - + * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE`` + - 0x00000040 + - + * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT`` + - 0x00000080 + - + +``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)`` + Specifies the scaling matrix (as extracted from the bitstream) for + the associated H264 slice data. The bitstream parameters are + defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling + List Semantics". For further documentation, refer to the above + specification, unless there is an explicit comment stating + otherwise. + + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_ctrl_h264_scaling_matrix + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``scaling_list_4x4[6][16]`` + - + * - __u8 + - ``scaling_list_8x8[6][64]`` + - + +``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)`` + Specifies the slice parameters (as extracted from the bitstream) + for the associated H264 slice data. This includes the necessary + parameters for configuring a stateless hardware decoding pipeline + for H264. The bitstream parameters are defined according to + :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further + documentation, refer to the above specification, unless there is + an explicit comment stating otherwise. + + .. note:: + + This compound control is not yet part of the public kernel API + and it is expected to change. + + This structure is expected to be passed as an array, with one + entry for each slice included in the bitstream buffer. + +.. c:type:: v4l2_ctrl_h264_slice_params + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_h264_slice_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``size`` + - + * - __u32 + - ``start_byte_offset`` + Offset (in bytes) from the beginning of the OUTPUT buffer to the start + of the slice. If the slice starts with a start code, then this is the + offset to such start code. When operating in slice-based decoding mode + (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should + be set to 0. When operating in frame-based decoding mode, this field + should be 0 for the first slice. + * - __u32 + - ``header_bit_size`` + - + * - __u16 + - ``first_mb_in_slice`` + - + * - __u8 + - ``slice_type`` + - + * - __u8 + - ``pic_parameter_set_id`` + - + * - __u8 + - ``colour_plane_id`` + - + * - __u8 + - ``redundant_pic_cnt`` + - + * - __u16 + - ``frame_num`` + - + * - __u16 + - ``idr_pic_id`` + - + * - __u16 + - ``pic_order_cnt_lsb`` + - + * - __s32 + - ``delta_pic_order_cnt_bottom`` + - + * - __s32 + - ``delta_pic_order_cnt0`` + - + * - __s32 + - ``delta_pic_order_cnt1`` + - + * - struct :c:type:`v4l2_h264_pred_weight_table` + - ``pred_weight_table`` + - + * - __u32 + - ``dec_ref_pic_marking_bit_size`` + - + * - __u32 + - ``pic_order_cnt_bit_size`` + - + * - __u8 + - ``cabac_init_idc`` + - + * - __s8 + - ``slice_qp_delta`` + - + * - __s8 + - ``slice_qs_delta`` + - + * - __u8 + - ``disable_deblocking_filter_idc`` + - + * - __s8 + - ``slice_alpha_c0_offset_div2`` + - + * - __s8 + - ``slice_beta_offset_div2`` + - + * - __u8 + - ``num_ref_idx_l0_active_minus1`` + - + * - __u8 + - ``num_ref_idx_l1_active_minus1`` + - + * - __u32 + - ``slice_group_change_cycle`` + - + * - __u8 + - ``ref_pic_list0[32]`` + - Reference picture list after applying the per-slice modifications + * - __u8 + - ``ref_pic_list1[32]`` + - Reference picture list after applying the per-slice modifications + * - __u32 + - ``flags`` + - See :ref:`Slice Parameter Flags <h264_slice_flags>` + +.. _h264_slice_flags: + +``Slice Parameter Set Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC`` + - 0x00000001 + - + * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD`` + - 0x00000002 + - + * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED`` + - 0x00000004 + - + * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH`` + - 0x00000008 + - + +``Prediction Weight Table`` + + The bitstream parameters are defined according to :ref:`h264`, + section 7.4.3.2 "Prediction Weight Table Semantics". For further + documentation, refer to the above specification, unless there is + an explicit comment stating otherwise. + +.. c:type:: v4l2_h264_pred_weight_table + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_h264_pred_weight_table + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u16 + - ``luma_log2_weight_denom`` + - + * - __u16 + - ``chroma_log2_weight_denom`` + - + * - struct :c:type:`v4l2_h264_weight_factors` + - ``weight_factors[2]`` + - The weight factors at index 0 are the weight factors for the reference + list 0, the one at index 1 for the reference list 1. + +.. c:type:: v4l2_h264_weight_factors + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_h264_weight_factors + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s16 + - ``luma_weight[32]`` + - + * - __s16 + - ``luma_offset[32]`` + - + * - __s16 + - ``chroma_weight[32][2]`` + - + * - __s16 + - ``chroma_offset[32][2]`` + - + +``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)`` + Specifies the decode parameters (as extracted from the bitstream) + for the associated H264 slice data. This includes the necessary + parameters for configuring a stateless hardware decoding pipeline + for H264. The bitstream parameters are defined according to + :ref:`h264`. For further documentation, refer to the above + specification, unless there is an explicit comment stating + otherwise. + + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_ctrl_h264_decode_params + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_h264_decode_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - struct :c:type:`v4l2_h264_dpb_entry` + - ``dpb[16]`` + - + * - __u16 + - ``num_slices`` + - Number of slices needed to decode the current frame/field. When + operating in slice-based decoding mode (see + :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field + should always be set to one. + * - __u16 + - ``nal_ref_idc`` + - NAL reference ID value coming from the NAL Unit header + * - __s32 + - ``top_field_order_cnt`` + - Picture Order Count for the coded top field + * - __s32 + - ``bottom_field_order_cnt`` + - Picture Order Count for the coded bottom field + * - __u32 + - ``flags`` + - See :ref:`Decode Parameters Flags <h264_decode_params_flags>` + +.. _h264_decode_params_flags: + +``Decode Parameters Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC`` + - 0x00000001 + - That picture is an IDR picture + +.. c:type:: v4l2_h264_dpb_entry + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_h264_dpb_entry + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u64 + - ``reference_ts`` + - Timestamp of the V4L2 capture buffer to use as reference, used + with B-coded and P-coded frames. The timestamp refers to the + ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the + :c:func:`v4l2_timeval_to_ns()` function to convert the struct + :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __u16 + - ``frame_num`` + - + * - __u16 + - ``pic_num`` + - + * - __s32 + - ``top_field_order_cnt`` + - + * - __s32 + - ``bottom_field_order_cnt`` + - + * - __u32 + - ``flags`` + - See :ref:`DPB Entry Flags <h264_dpb_flags>` + +.. _h264_dpb_flags: + +``DPB Entries Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID`` + - 0x00000001 + - The DPB entry is valid and should be considered + * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE`` + - 0x00000002 + - The DPB entry is currently being used as a reference frame + * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM`` + - 0x00000004 + - The DPB entry is a long term reference frame + +``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)`` + Specifies the decoding mode to use. Currently exposes slice-based and + frame-based decoding but new modes might be added later on. + This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE + pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE + are required to set this control in order to specify the decoding mode + that is expected for the buffer. + Drivers may expose a single or multiple decoding modes, depending + on what they can support. + + .. note:: + + This menu control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_mpeg_video_h264_decode_mode + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED`` + - 0 + - Decoding is done at the slice granularity. + In this mode, ``num_slices`` field in struct + :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1, + and ``start_byte_offset`` in struct + :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0. + The OUTPUT buffer must contain a single slice. + * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED`` + - 1 + - Decoding is done at the frame granularity. + In this mode, ``num_slices`` field in struct + :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number + of slices in the frame, and ``start_byte_offset`` in struct + :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly + for each slice. For the first slice, ``start_byte_offset`` should + be zero. + The OUTPUT buffer must contain all slices needed to decode the + frame. The OUTPUT buffer must also contain both fields. + +``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)`` + Specifies the H264 slice start code expected for each slice. + This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE + pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE + are required to set this control in order to specify the start code + that is expected for the buffer. + Drivers may expose a single or multiple start codes, depending + on what they can support. + + .. note:: + + This menu control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_mpeg_video_h264_start_code + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE`` + - 0 + - Selecting this value specifies that H264 slices are passed + to the driver without any start code. + * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B`` + - 1 + - Selecting this value specifies that H264 slices are expected + to be prefixed by Annex B start codes. According to :ref:`h264` + valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. .. _v4l2-mpeg-mpeg2: @@ -1609,6 +2313,329 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Quantization parameter for a P frame for FWHT. Valid range: from 1 to 31. +.. _v4l2-mpeg-vp8: + +``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)`` + Specifies the frame parameters for the associated VP8 parsed frame data. + This includes the necessary parameters for + configuring a stateless hardware decoding pipeline for VP8. + The bitstream parameters are defined according to :ref:`vp8`. + + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + +.. c:type:: v4l2_ctrl_vp8_frame_header + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_vp8_frame_header + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - struct :c:type:`v4l2_vp8_segment_header` + - ``segment_header`` + - Structure with segment-based adjustments metadata. + * - struct :c:type:`v4l2_vp8_loopfilter_header` + - ``loopfilter_header`` + - Structure with loop filter level adjustments metadata. + * - struct :c:type:`v4l2_vp8_quantization_header` + - ``quant_header`` + - Structure with VP8 dequantization indices metadata. + * - struct :c:type:`v4l2_vp8_entropy_header` + - ``entropy_header`` + - Structure with VP8 entropy coder probabilities metadata. + * - struct :c:type:`v4l2_vp8_entropy_coder_state` + - ``coder_state`` + - Structure with VP8 entropy coder state. + * - __u16 + - ``width`` + - The width of the frame. Must be set for all frames. + * - __u16 + - ``height`` + - The height of the frame. Must be set for all frames. + * - __u8 + - ``horizontal_scale`` + - Horizontal scaling factor. + * - __u8 + - ``vertical_scaling factor`` + - Vertical scale. + * - __u8 + - ``version`` + - Bitstream version. + * - __u8 + - ``prob_skip_false`` + - Indicates the probability that the macroblock is not skipped. + * - __u8 + - ``prob_intra`` + - Indicates the probability that a macroblock is intra-predicted. + * - __u8 + - ``prob_last`` + - Indicates the probability that the last reference frame is used + for inter-prediction + * - __u8 + - ``prob_gf`` + - Indicates the probability that the golden reference frame is used + for inter-prediction + * - __u8 + - ``num_dct_parts`` + - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8. + * - __u32 + - ``first_part_size`` + - Size of the first partition, i.e. the control partition. + * - __u32 + - ``first_part_header_bits`` + - Size in bits of the first partition header portion. + * - __u32 + - ``dct_part_sizes[8]`` + - DCT coefficients sizes. + * - __u64 + - ``last_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as last reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``golden_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as last reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``alt_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``flags`` + - See :ref:`Frame Header Flags <vp8_frame_header_flags>` + +.. _vp8_frame_header_flags: + +``Frame Header Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME`` + - 0x01 + - Indicates if the frame is a key frame. + * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL`` + - 0x02 + - Experimental bitstream. + * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME`` + - 0x04 + - Show frame flag, indicates if the frame is for display. + * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF`` + - 0x08 + - Enable/disable skipping of macroblocks with no non-zero coefficients. + * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN`` + - 0x10 + - Sign of motion vectors when the golden frame is referenced. + * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT`` + - 0x20 + - Sign of motion vectors when the alt frame is referenced. + +.. c:type:: v4l2_vp8_entropy_coder_state + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| + +.. flat-table:: struct v4l2_vp8_entropy_coder_state + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``range`` + - + * - __u8 + - ``value`` + - + * - __u8 + - ``bit_count`` + - + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + +.. c:type:: v4l2_vp8_segment_header + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| + +.. flat-table:: struct v4l2_vp8_segment_header + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``quant_update[4]`` + - Signed quantizer value update. + * - __s8 + - ``lf_update[4]`` + - Signed loop filter level value update. + * - __u8 + - ``segment_probs[3]`` + - Segment probabilities. + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + * - __u32 + - ``flags`` + - See :ref:`Segment Header Flags <vp8_segment_header_flags>` + +.. _vp8_segment_header_flags: + +``Segment Header Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED`` + - 0x01 + - Enable/disable segment-based adjustments. + * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP`` + - 0x02 + - Indicates if the macroblock segmentation map is updated in this frame. + * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA`` + - 0x04 + - Indicates if the segment feature data is updated in this frame. + * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE`` + - 0x08 + - If is set, the segment feature data mode is delta-value. + If cleared, it's absolute-value. + +.. c:type:: v4l2_vp8_loopfilter_header + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| + +.. flat-table:: struct v4l2_vp8_loopfilter_header + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``ref_frm_delta[4]`` + - Reference adjustment (signed) delta value. + * - __s8 + - ``mb_mode_delta[4]`` + - Macroblock prediction mode adjustment (signed) delta value. + * - __u8 + - ``sharpness_level`` + - Sharpness level + * - __u8 + - ``level`` + - Filter level + * - __u16 + - ``padding`` + - Applications and drivers must set this to zero. + * - __u32 + - ``flags`` + - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>` + +.. _vp8_loopfilter_header_flags: + +``Loopfilter Header Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE`` + - 0x01 + - Enable/disable macroblock-level loop filter adjustment. + * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE`` + - 0x02 + - Indicates if the delta values used in an adjustment are updated. + * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE`` + - 0x04 + - If set, indicates the filter type is simple. + If cleared, the filter type is normal. + +.. c:type:: v4l2_vp8_quantization_header + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| + +.. flat-table:: struct v4l2_vp8_quantization_header + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``y_ac_qi`` + - Luma AC coefficient table index. + * - __s8 + - ``y_dc_delta`` + - Luma DC delta vaue. + * - __s8 + - ``y2_dc_delta`` + - Y2 block DC delta value. + * - __s8 + - ``y2_ac_delta`` + - Y2 block AC delta value. + * - __s8 + - ``uv_dc_delta`` + - Chroma DC delta value. + * - __s8 + - ``uv_ac_delta`` + - Chroma AC delta value. + * - __u16 + - ``padding`` + - Applications and drivers must set this to zero. + +.. c:type:: v4l2_vp8_entropy_header + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| + +.. flat-table:: struct v4l2_vp8_entropy_header + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``coeff_probs[4][8][3][11]`` + - Coefficient update probabilities. + * - __u8 + - ``y_mode_probs[4]`` + - Luma mode update probabilities. + * - __u8 + - ``uv_mode_probs[3]`` + - Chroma mode update probabilities. + * - __u8 + - ``mv_probs[2][19]`` + - MV decoding update probabilities. + * - __u8 + - ``padding[3]`` + - Applications and drivers must set this to zero. + .. raw:: latex \normalsize |