diff options
Diffstat (limited to 'Documentation/media/uapi/v4l/extended-controls.rst')
| -rw-r--r-- | Documentation/media/uapi/v4l/extended-controls.rst | 412 |
1 files changed, 411 insertions, 1 deletions
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index dfe49ae57e78..03931f9b1285 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1960,6 +1960,416 @@ enum v4l2_vp8_golden_frame_sel - 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. +High Efficiency Video Coding (HEVC/H.265) Control Reference +----------------------------------------------------------- + +The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265 +video codec. + + +.. _hevc-control-id: + +HEVC/H.265 Control IDs +^^^^^^^^^^^^^^^^^^^^^^ + +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` + Minimum quantization parameter for HEVC. + Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` + Maximum quantization parameter for HEVC. + Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)`` + Quantization parameter for a P frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)`` + Quantization parameter for a B frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` + HIERARCHICAL_QP allows the host to specify the quantization parameter + values for each temporal layer through HIERARCHICAL_QP_LAYER. This is + valid only if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the + control value to 1 enables setting of the QP values for the layers. + +.. _v4l2-hevc-hier-coding-type: + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE`` + (enum) + +enum v4l2_mpeg_video_hevc_hier_coding_type - + Selects the hierarchical coding type for encoding. Possible values are: + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B`` + - Use the B frame for hierarchical coding. + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P`` + - Use the P frame for hierarchical coding. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)`` + Selects the hierarchical coding layer. In normal encoding + (non-hierarchial coding), it should be zero. Possible values are [0, 6]. + 0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING + LAYER 1 and so on. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 0. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 1. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 2. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 3. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 4. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 5. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 6. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +.. _v4l2-hevc-profile: + +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE`` + (enum) + +enum v4l2_mpeg_video_hevc_profile - + Select the desired profile for HEVC encoder. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN`` + - Main profile. + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE`` + - Main still picture profile. + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10`` + - Main 10 profile. + +.. raw:: latex + + \normalsize + + +.. _v4l2-hevc-level: + +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL`` + (enum) + +enum v4l2_mpeg_video_hevc_level - + Selects the desired level for HEVC encoder. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` + - Level 1.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` + - Level 2.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` + - Level 3.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` + - Level 4.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` + - Level 5.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` + - Level 5.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` + - Level 5.2 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` + - Level 6.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` + - Level 6.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` + - Level 6.2 + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)`` + Indicates the number of evenly spaced subintervals, called ticks, within + one second. This is a 16 bit unsigned integer and has a maximum value up to + 0xffff and a minimum value of 1. + +.. _v4l2-hevc-tier: + +``V4L2_CID_MPEG_VIDEO_HEVC_TIER`` + (enum) + +enum v4l2_mpeg_video_hevc_tier - + TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier + were made to deal with applications that differ in terms of maximum bit + rate. Setting the flag to 0 selects HEVC tier as Main tier and setting + this flag to 1 indicates High tier. High tier is for applications requiring + high bit rates. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` + - Main tier. + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` + - High tier. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)`` + Selects HEVC maximum coding unit depth. + +.. _v4l2-hevc-loop-filter-mode: + +``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_video_hevc_loop_filter_mode - + Loop filter mode for HEVC encoder. Possible values are: + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{10.7cm}|p{6.3cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED`` + - Loop filter is disabled. + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED`` + - Loop filter is enabled. + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY`` + - Loop filter is disabled at the slice boundary. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)`` + Selects HEVC loop filter beta offset. The valid range is [-6, +6]. + +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)`` + Selects HEVC loop filter tc offset. The valid range is [-6, +6]. + +.. _v4l2-hevc-refresh-type: + +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE`` + (enum) + +enum v4l2_mpeg_video_hevc_hier_refresh_type - + Selects refresh type for HEVC encoder. + Host has to specify the period into + V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{8.0cm}|p{9.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE`` + - Use the B frame for hierarchical coding. + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA`` + - Use CRA (Clean Random Access Unit) picture encoding. + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR`` + - Use IDR (Instantaneous Decoding Refresh) picture encoding. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)`` + Selects the refresh period for HEVC encoder. + This specifies the number of I pictures between two CRA/IDR pictures. + This is valid only if REFRESH_TYPE is not 0. + +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)`` + Indicates HEVC lossless encoding. Setting it to 0 disables lossless + encoding. Setting it to 1 enables lossless encoding. + +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)`` + Indicates constant intra prediction for HEVC encoder. Specifies the + constrained intra prediction in which intra largest coding unit (LCU) + prediction is performed by using residual data and decoded samples of + neighboring intra LCU only. Setting the value to 1 enables constant intra + prediction and setting the value to 0 disables constant intra prediction. + +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)`` + Indicates wavefront parallel processing for HEVC encoder. Setting it to 0 + disables the feature and setting it to 1 enables the wavefront parallel + processing. + +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)`` + Setting the value to 1 enables combination of P and B frame for HEVC + encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)`` + Indicates temporal identifier for HEVC encoder which is enabled by + setting the value to 1. + +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)`` + Indicates bi-linear interpolation is conditionally used in the intra + prediction filtering process in the CVS when set to 1. Indicates bi-linear + interpolation is not used in the CVS when set to 0. + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)`` + Indicates maximum number of merge candidate motion vectors. + Values are from 0 to 4. + +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)`` + Indicates temporal motion vector prediction for HEVC encoder. Setting it to + 1 enables the prediction. Setting it to 0 disables the prediction. + +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)`` + Specifies if HEVC generates a stream with a size of the length field + instead of start code pattern. The size of the length field is configurable + through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting + the value to 0 disables encoding without startcode pattern. Setting the + value to 1 will enables encoding without startcode pattern. + +.. _v4l2-hevc-size-of-length-field: + +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD`` +(enum) + +enum v4l2_mpeg_video_hevc_size_of_length_field - + Indicates the size of length field. + This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{6.0cm}|p{11.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0`` + - Generate start code pattern (Normal). + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1`` + - Generate size of length field instead of start code pattern and length is 1. + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2`` + - Generate size of length field instead of start code pattern and length is 2. + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4`` + - Generate size of length field instead of start code pattern and length is 4. + +.. raw:: latex + + \normalsize + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)`` + Indicates bit rate for hierarchical coding layer 0 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)`` + Indicates bit rate for hierarchical coding layer 1 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)`` + Indicates bit rate for hierarchical coding layer 2 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)`` + Indicates bit rate for hierarchical coding layer 3 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)`` + Indicates bit rate for hierarchical coding layer 4 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)`` + Indicates bit rate for hierarchical coding layer 5 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)`` + Indicates bit rate for hierarchical coding layer 6 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)`` + Selects number of P reference pictures required for HEVC encoder. + P-Frame can use 1 or 2 frames for reference. + +``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)`` + Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 + disables generating SPS and PPS at every IDR. Setting it to one enables + generating SPS and PPS at every IDR. + + .. _camera-controls: Camera Control Reference @@ -3155,7 +3565,7 @@ enum v4l2_dv_it_content_type - HDMI carries 5V on one of the pins). This is often used to power an eeprom which contains EDID information, such that the source can read the EDID even if the sink is in standby/power off. Each bit - corresponds to an input pad on the transmitter. If an input pad + corresponds to an input pad on the receiver. If an input pad cannot detect whether power is present, then the bit for that pad will be 0. This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. |