aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/networking/tms380tr.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/tms380tr.txt')
-rw-r--r--Documentation/networking/tms380tr.txt147
1 files changed, 0 insertions, 147 deletions
diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt
deleted file mode 100644
index 1f73e13058df..000000000000
--- a/Documentation/networking/tms380tr.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver.
- Text file by: Jay Schulist <jschlst@samba.org>
-
-The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA,
-SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the
-SK NET TR4/16 ISA card.
-
-Latest information on this driver can be obtained on the Linux-SNA WWW site.
-Please point your browser to:
-http://www.linux-sna.org
-
-Many thanks to Christoph Goos for his excellent work on this driver and
-SysKonnect for donating the adapters to Linux-SNA for the testing and
-maintenance of this device driver.
-
-Important information to be noted:
-1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be
- patient.
-2. This driver works very well when autoprobing for adapters. Why even
- think about those nasty io/int/dma settings of modprobe when the driver
- will do it all for you!
-
-This driver is rather simple to use. Select Y to Token Ring adapter support
-in the kernel configuration. A choice for SysKonnect Token Ring adapters will
-appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
-option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it statically answer Y instead.
-
-This driver supports multiple adapters without the need to load multiple copies
-of the driver. You should be able to load up to 7 adapters without any kernel
-modifications, if you are in need of more please contact the maintainer of this
-driver.
-
-Load the driver either by lilo/loadlin or as a module. When a module using the
-following command will suffice for most:
-
-# modprobe sktr
-
-This will produce output similar to the following: (Output is user specific)
-
-sktr.c: v1.01 08/29/97 by Christoph Goos
-tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17.
-tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16.
-tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5.
-
-Now just setup the device via ifconfig and set and routes you may have. After
-this you are ready to start sending some tokens.
-
-Errata:
-For anyone wondering where to pick up the SysKonnect adapters please browse
-to http://www.syskonnect.com
-
-This driver is under the GNU General Public License. Its Firmware image is
-included as an initialized C-array and is licensed by SysKonnect to the Linux
-users of this driver. However no warranty about its fitness is expressed or
-implied by SysKonnect.
-
-Below find attached the setting for the SK NET TR 4/16 ISA adapters
--------------------------------------------------------------------
-
- ***************************
- *** C O N T E N T S ***
- ***************************
-
- 1) Location of DIP-Switch W1
- 2) Default settings
- 3) DIP-Switch W1 description
-
-
- ==============================================================
- CHAPTER 1 LOCATION OF DIP-SWITCH
- ==============================================================
-
-UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
-þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ
-þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ
-þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿
-þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ
-þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU
-þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ
-þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿
-þAÄÄÄÄÄÄU þ þ þ þ
-þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ
-þ þ þ
-þ AÄU
-þ þ
-þ þ
-þ þ
-þ þ
-AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
- AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
-
- ==============================================================
- CHAPTER 2 DEFAULT SETTINGS
- ==============================================================
-
- W1 1 2 3 4 5 6 7 8
- +------------------------------+
- | ON X |
- | OFF X X X X X X X |
- +------------------------------+
-
- W1.1 = ON Adapter drives address lines SA17..19
- W1.2 - 1.5 = OFF BootROM disabled
- W1.6 - 1.8 = OFF I/O address 0A20h
-
- ==============================================================
- CHAPTER 3 DIP SWITCH W1 DESCRIPTION
- ==============================================================
-
- UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON
- þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
- AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF
- |AD | BootROM Addr. | I/O |
- +-+-+-------+-------+-----+-----+
- | | |
- | | +------ 6 7 8
- | | ON ON ON 1900h
- | | ON ON OFF 0900h
- | | ON OFF ON 1980h
- | | ON OFF OFF 0980h
- | | OFF ON ON 1b20h
- | | OFF ON OFF 0b20h
- | | OFF OFF ON 1a20h
- | | OFF OFF OFF 0a20h (+)
- | |
- | |
- | +-------- 2 3 4 5
- | OFF x x x disabled (+)
- | ON ON ON ON C0000
- | ON ON ON OFF C4000
- | ON ON OFF ON C8000
- | ON ON OFF OFF CC000
- | ON OFF ON ON D0000
- | ON OFF ON OFF D4000
- | ON OFF OFF ON D8000
- | ON OFF OFF OFF DC000
- |
- |
- +----- 1
- OFF adapter does NOT drive SA<17..19>
- ON adapter drives SA<17..19> (+)
-
-
- (+) means default setting
-
- ********************************