aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/sound/alsa/ALSA-Configuration.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt82
1 files changed, 68 insertions, 14 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 7f4dcebda9c6..d0eb696d32e8 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
control correctly. If you have problems regarding this, try
another ALSA compliant mixer (alsamixer works).
+ Module snd-azt1605
+ ------------------
+
+ Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
+ chipset.
+
+ port - port # for BASE (0x220,0x240,0x260,0x280)
+ wss_port - port # for WSS (0x530,0x604,0xe80,0xf40)
+ irq - IRQ # for WSS (7,9,10,11)
+ dma1 - DMA # for WSS playback (0,1,3)
+ dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
+ mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+ mpu_irq - IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
+ fm_port - port # for OPL3 (0x388), -1 = disabled (default)
+
+ This module supports multiple cards. It does not support autoprobe: port,
+ wss_port, irq and dma1 have to be specified. The other values are
+ optional.
+
+ "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+ or the value stored in the card's EEPROM for cards that have an EEPROM and
+ their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+ be choosen freely from the options enumerated above.
+
+ If dma2 is specified and different from dma1, the card will operate in
+ full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+ enable capture since only channels 0 and 1 are available for capture.
+
+ Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+ mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+ Whatever IRQ and DMA channels you pick, be sure to reserve them for
+ legacy ISA in your BIOS.
+
+ Module snd-azt2316
+ ------------------
+
+ Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
+ chipset.
+
+ port - port # for BASE (0x220,0x240,0x260,0x280)
+ wss_port - port # for WSS (0x530,0x604,0xe80,0xf40)
+ irq - IRQ # for WSS (7,9,10,11)
+ dma1 - DMA # for WSS playback (0,1,3)
+ dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
+ mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+ mpu_irq - IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
+ fm_port - port # for OPL3 (0x388), -1 = disabled (default)
+
+ This module supports multiple cards. It does not support autoprobe: port,
+ wss_port, irq and dma1 have to be specified. The other values are
+ optional.
+
+ "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+ or the value stored in the card's EEPROM for cards that have an EEPROM and
+ their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+ be choosen freely from the options enumerated above.
+
+ If dma2 is specified and different from dma1, the card will operate in
+ full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+ enable capture since only channels 0 and 1 are available for capture.
+
+ Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+ mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+ Whatever IRQ and DMA channels you pick, be sure to reserve them for
+ legacy ISA in your BIOS.
+
Module snd-aw2
--------------
@@ -1641,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
- Module snd-sgalaxy
- ------------------
-
- Module for Aztech Sound Galaxy sound card.
-
- sbport - Port # for SB16 interface (0x220,0x240)
- wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
- irq - IRQ # (7,9,10,11)
- dma1 - DMA #
-
- This module supports multiple cards.
-
- The power-management is supported.
-
Module snd-sscape
-----------------