diff options
Diffstat (limited to 'Documentation/sound/alsa')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 17 | ||||
| -rw-r--r-- | Documentation/sound/alsa/Audiophile-Usb.txt | 10 | ||||
| -rw-r--r-- | Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl | 2 | ||||
| -rw-r--r-- | Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 4 | ||||
| -rw-r--r-- | Documentation/sound/alsa/hda_codec.txt | 2 | ||||
| -rw-r--r-- | Documentation/sound/alsa/soc/dapm.txt | 2 |
6 files changed, 24 insertions, 13 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 0bbee38acd26..72aff61e7315 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -753,8 +753,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. [Multiple options for each card instance] model - force the model name - position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) + position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. + Passing -1 will make the driver to choose the appropriate + value based on the controller chip. [Single (global) options] single_cmd - Use single immediate commands to communicate with @@ -845,7 +848,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC269 basic Basic preset - ALC662 + ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF 3stack-6ch 3-stack (6-channel) 3stack-6ch-dig 3-stack (6-channel) with SPDIF @@ -853,6 +856,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo laptop eeepc-p701 ASUS Eeepc P701 eeepc-ep20 ASUS Eeepc EP20 + m51va ASUS M51VA + g71v ASUS G71V + h13 ASUS H13 + g50v ASUS G50V auto auto-config reading BIOS (default) ALC882/885 @@ -1091,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This occurs when the access to non-existing or non-working codec slot (likely a modem one) causes a stall of the communication via HD-audio bus. You can see which codec slots are probed by enabling - CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec + CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec proc files. Then limit the slots to probe by probe_mask option. For example, probe_mask=1 means to probe only the first slot, and probe_mask=4 means only the third slot. @@ -2267,6 +2274,10 @@ case above again, the first two slots are already reserved. If any other driver (e.g. snd-usb-audio) is loaded before snd-interwave or snd-ens1371, it will be assigned to the third or later slot. +When a module name is given with '!', the slot will be given for any +modules but that name. For example, "slots=!snd-pcsp" will reserve +the first slot for any modules but snd-pcsp. + ALSA PCM devices to OSS devices mapping ======================================= diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt index 2ad5e6306c44..a4c53d8961e1 100644 --- a/Documentation/sound/alsa/Audiophile-Usb.txt +++ b/Documentation/sound/alsa/Audiophile-Usb.txt @@ -236,15 +236,15 @@ The parameter can be given: alias snd-card-1 snd-usb-audio options snd-usb-audio index=1 device_setup=0x09 -CAUTION when initializaing the device +CAUTION when initializing the device ------------------------------------- * Correct initialization on the device requires that device_setup is given to the module BEFORE the device is turned on. So, if you use the "manual probing" method described above, take care to power-on the device AFTER this initialization. - * Failing to respect this will lead in a misconfiguration of the device. In this case - turn off the device, unproble the snd-usb-audio module, then probe it again with + * Failing to respect this will lead to a misconfiguration of the device. In this case + turn off the device, unprobe the snd-usb-audio module, then probe it again with correct device_setup parameter and then (and only then) turn on the device again. * If you've correctly initialized the device in a valid mode and then want to switch @@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device: Jack supports big endian devices only in recent versions (thanks to Andreas Steinmetz for his first big-endian patch). I can't remember -extacly when this support was released into jackd, let's just say that +exactly when this support was released into jackd, let's just say that with jackd version 0.103.0 it's almost ok (just a small bug is affecting -16bits Big-Endian devices, but since you've read carefully the above +16bits Big-Endian devices, but since you've read carefully the above paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices are now Little Endians ;-) ). diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl index c4d2e3507af9..9d644f7e241e 100644 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl @@ -42,7 +42,7 @@ <sect1><title>Device Components</title> !Esound/core/device.c </sect1> - <sect1><title>KMOD and Device File Entries</title> + <sect1><title>Module requests and Device File Entries</title> !Esound/core/sound.c </sect1> <sect1><title>Memory Management Helpers</title> diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index b03df4d4795c..e13c4e67029f 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -6127,8 +6127,8 @@ struct _snd_pcm_runtime { <para> <function>snd_printdd()</function> is compiled in only when - <constant>CONFIG_SND_DEBUG_DETECT</constant> is set. Please note - that <constant>DEBUG_DETECT</constant> is not set as default + <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is set. Please note + that <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is not set as default even if you configure the alsa-driver with <option>--with-debug=full</option> option. You need to give explicitly <option>--with-debug=detect</option> option instead. diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt index 8e1b02526698..34e87ec1379c 100644 --- a/Documentation/sound/alsa/hda_codec.txt +++ b/Documentation/sound/alsa/hda_codec.txt @@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs to power up or may power down. The controller should check the all belonging codecs on the bus whether they are actually powered off (check codec->power_on), and optionally the driver may power down the -contoller side, too. +controller side, too. The bus instance is created via snd_hda_bus_new(). You need to pass the card instance, the template, and the pointer to store the diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index c784a18b94dc..b2ed6983f40d 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:- (Widgets are defined in include/sound/soc-dapm.h) Widgets are usually added in the codec driver and the machine driver. There are -convience macros defined in soc-dapm.h that can be used to quickly build a +convenience macros defined in soc-dapm.h that can be used to quickly build a list of widgets of the codecs and machines DAPM widgets. Most widgets have a name, register, shift and invert. Some widgets have extra |