diff options
Diffstat (limited to 'Documentation/video4linux/cx2341x/fw-encoder-api.txt')
| -rw-r--r-- | Documentation/video4linux/cx2341x/fw-encoder-api.txt | 71 |
1 files changed, 42 insertions, 29 deletions
diff --git a/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/Documentation/video4linux/cx2341x/fw-encoder-api.txt index 15df0df57ddd..5dd3109a8b3f 100644 --- a/Documentation/video4linux/cx2341x/fw-encoder-api.txt +++ b/Documentation/video4linux/cx2341x/fw-encoder-api.txt @@ -213,16 +213,6 @@ Param[1] ------------------------------------------------------------------------------- -Name CX2341X_ENC_SET_3_2_PULLDOWN -Enum 177/0xB1 -Description - 3:2 pulldown properties -Param[0] - 0=enabled - 1=disabled - -------------------------------------------------------------------------------- - Name CX2341X_ENC_SET_VBI_LINE Enum 183/0xB7 Description @@ -332,9 +322,7 @@ Param[0] '01'=JointStereo '10'=Dual '11'=Mono - Note: testing seems to indicate that Mono and possibly - JointStereo are not working (default to stereo). - Dual does work, though. + Note: the cx23415 cannot decode Joint Stereo properly. 10:11 Mode Extension used in joint_stereo mode. In Layer I and II they indicate which subbands are in @@ -413,16 +401,34 @@ Name CX2341X_ENC_SET_PGM_INDEX_INFO Enum 199/0xC7 Description Sets the Program Index Information. + The information is stored as follows: + + struct info { + u32 length; // Length of this frame + u32 offset_low; // Offset in the file of the + u32 offset_high; // start of this frame + u32 mask1; // Bits 0-1 are the type mask: + // 1=I, 2=P, 4=B + u32 pts; // The PTS of the frame + u32 mask2; // Bit 0 is bit 32 of the pts. + }; + u32 table_ptr; + struct info index[400]; + + The table_ptr is the encoder memory address in the table were + *new* entries will be written. Note that this is a ringbuffer, + so the table_ptr will wraparound. Param[0] Picture Mask: 0=No index capture 1=I frames 3=I,P frames 7=I,P,B frames + (Seems to be ignored, it always indexes I, P and B frames) Param[1] Elements requested (up to 400) Result[0] - Offset in SDF memory of the table. + Offset in the encoder memory of the start of the table. Result[1] Number of allocated elements up to a maximum of Param[1] @@ -492,12 +498,14 @@ Name CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 Enum 203/0xCB Description Returns information on the previous DMA transfer in conjunction with - bit 27 of the interrupt mask. Uses mailbox 9. + bit 27 or 18 of the interrupt mask. Uses mailbox 9. Result[0] Status bits: - Bit 0 set indicates transfer complete - Bit 2 set indicates transfer error - Bit 4 set indicates linked list error + 0 read completed + 1 write completed + 2 DMA read error + 3 DMA write error + 4 Scatter-Gather array error Result[1] DMA type Result[2] @@ -655,12 +663,13 @@ Param[0] ------------------------------------------------------------------------------- -Name CX2341X_ENC_UNKNOWN +Name CX2341X_ENC_SET_VERT_CROP_LINE Enum 219/0xDB Description - Unknown API, it's used by Hauppauge though. + Something to do with 'Vertical Crop Line' Param[0] - 0 This is the value Hauppauge uses, Unknown what it means. + If saa7114 and raw VBI capture and 60 Hz, then set to 10001. + Else 0. ------------------------------------------------------------------------------- @@ -672,21 +681,25 @@ Description the value. Param[0] Command number: - 1=set initial SCR value when starting encoding. + 1=set initial SCR value when starting encoding (works). 2=set quality mode (apparently some test setting). - 3=setup advanced VIM protection handling (supposedly only for the cx23416 - for raw YUV). - Actually it looks like this should be 0 for saa7114/5 based card and 1 - for cx25840 based cards. - 4=generate artificial PTS timestamps + 3=setup advanced VIM protection handling. + Always 1 for the cx23416 and 0 for cx23415. + 4=generate DVD compatible PTS timestamps 5=USB flush mode 6=something to do with the quantization matrix - 7=set navigation pack insertion for DVD + 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2) + packets to the MPEG. The size of these packets is 2048 bytes (including + the header of 6 bytes: 0x000001bf + length). The payload is zeroed and + it is up to the application to fill them in. These packets are apparently + inserted every four frames. 8=enable scene change detection (seems to be a failure) 9=set history parameters of the video input module 10=set input field order of VIM 11=set quantization matrix - 12=reset audio interface + 12=reset audio interface after channel change or input switch (has no argument). + Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to + do any harm calling it regardless. 13=set audio volume delay 14=set audio delay |