aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/stable/sysfs-bus-xen-backend9
-rw-r--r--Documentation/ABI/testing/sysfs-driver-xen-blkback10
-rw-r--r--Documentation/arm64/sve.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt3
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt14
-rw-r--r--Documentation/devicetree/bindings/net/cpsw.txt6
-rw-r--r--Documentation/devicetree/bindings/net/sh_eth.txt1
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt5
-rw-r--r--Documentation/hwmon/ina2xx2
-rw-r--r--Documentation/i2c/DMA-considerations10
-rw-r--r--Documentation/scsi/scsi-parameters.txt5
11 files changed, 56 insertions, 13 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend
index 3d5951c8bf5f..e8b60bd766f7 100644
--- a/Documentation/ABI/stable/sysfs-bus-xen-backend
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -73,3 +73,12 @@ KernelVersion: 3.0
Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Number of sectors written by the frontend.
+
+What: /sys/bus/xen-backend/devices/*/state
+Date: August 2018
+KernelVersion: 4.19
+Contact: Joe Jin <joe.jin@oracle.com>
+Description:
+ The state of the device. One of: 'Unknown',
+ 'Initialising', 'Initialised', 'Connected', 'Closing',
+ 'Closed', 'Reconfiguring', 'Reconfigured'.
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback
index 8bb43b66eb55..4e7babb3ba1f 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -15,3 +15,13 @@ Description:
blkback. If the frontend tries to use more than
max_persistent_grants, the LRU kicks in and starts
removing 5% of max_persistent_grants every 100ms.
+
+What: /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds
+Date: August 2018
+KernelVersion: 4.19
+Contact: Roger Pau Monné <roger.pau@citrix.com>
+Description:
+ How long a persistent grant is allowed to remain
+ allocated without being in use. The time is in
+ seconds, 0 means indefinitely long.
+ The default is 60 seconds.
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
index f128f736b4a5..7169a0ec41d8 100644
--- a/Documentation/arm64/sve.txt
+++ b/Documentation/arm64/sve.txt
@@ -200,7 +200,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
thread.
* Changing the vector length causes all of P0..P15, FFR and all bits of
- Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
flag, does not constitute a change to the vector length for this purpose.
@@ -500,7 +500,7 @@ References
[2] arch/arm64/include/uapi/asm/ptrace.h
AArch64 Linux ptrace ABI definitions
-[3] linux/Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.txt
[4] ARM IHI0055C
http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 00e4365d7206..091c8dfd3229 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
@@ -11,7 +10,7 @@ Required properties:
Examples:
lpi2c7: lpi2c7@40a50000 {
- compatible = "fsl,imx8dv-lpi2c";
+ compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
index b0a8af51c388..265b223cd978 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
@@ -11,7 +11,7 @@ The RISC-V supervisor ISA manual specifies three interrupt sources that are
attached to every HLIC: software interrupts, the timer interrupt, and external
interrupts. Software interrupts are used to send IPIs between cores. The
timer interrupt comes from an architecturally mandated real-time timer that is
-controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
interrupts connect all other device interrupts to the HLIC, which are routed
via the platform-level interrupt controller (PLIC).
@@ -25,7 +25,15 @@ in the system.
Required properties:
- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>
+- #interrupt-cells : should be <1>. The interrupt sources are defined by the
+ RISC-V supervisor ISA manual, with only the following three interrupts being
+ defined for supervisor mode:
+ - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+ call and is reserved for use by software.
+ - Source 5 is the supervisor timer interrupt, which can be configured by
+ SBI calls and implements a one-shot timer.
+ - Source 9 is the supervisor external interrupt, which chains to all other
+ device interrupts.
- interrupt-controller : Identifies the node as an interrupt controller
Furthermore, this interrupt-controller MUST be embedded inside the cpu
@@ -38,7 +46,7 @@ An example device tree entry for a HLIC is show below.
...
cpu1-intc: interrupt-controller {
#interrupt-cells = <1>;
- compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+ compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 41089369f891..b3acebe08eb0 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -19,6 +19,10 @@ Required properties:
- slaves : Specifies number for slaves
- active_slave : Specifies the slave to use for time stamping,
ethtool and SIOCGMIIPHY
+- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
+ device. See also cpsw-phy-sel.txt for it's binding.
+ Note that in legacy cases cpsw-phy-sel may be
+ a child device instead of a phandle.
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@@ -75,6 +79,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
+ cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
@@ -103,6 +108,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
+ cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 76db9f13ad96..abc36274227c 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -16,6 +16,7 @@ Required properties:
"renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
"renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+ "renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
"renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
"renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
device.
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index 5d47a262474c..9407212a85a8 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -7,6 +7,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
- "renesas,r8a7745-wdt" (RZ/G1E)
+ - "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)
- "renesas,r8a7791-wdt" (R-Car M2-W)
- "renesas,r8a7792-wdt" (R-Car V2H)
@@ -21,8 +22,8 @@ Required properties:
- "renesas,r7s72100-wdt" (RZ/A1)
The generic compatible string must be:
- "renesas,rza-wdt" for RZ/A
- - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G
- - "renesas,rcar-gen3-wdt" for R-Car Gen3
+ - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
+ - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2
- reg : Should contain WDT registers location and length
- clocks : the clock feeding the watchdog timer.
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 72d16f08e431..b8df81f6d6bc 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -32,7 +32,7 @@ Supported chips:
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
-Author: Lothar Felten <l-felten@ti.com>
+Author: Lothar Felten <lothar.felten@gmail.com>
Description
-----------
diff --git a/Documentation/i2c/DMA-considerations b/Documentation/i2c/DMA-considerations
index 966610aa4620..203002054120 100644
--- a/Documentation/i2c/DMA-considerations
+++ b/Documentation/i2c/DMA-considerations
@@ -50,10 +50,14 @@ bounce buffer. But you don't need to care about that detail, just use the
returned buffer. If NULL is returned, the threshold was not met or a bounce
buffer could not be allocated. Fall back to PIO in that case.
-In any case, a buffer obtained from above needs to be released. It ensures data
-is copied back to the message and a potentially used bounce buffer is freed::
+In any case, a buffer obtained from above needs to be released. Another helper
+function ensures a potentially used bounce buffer is freed::
- i2c_release_dma_safe_msg_buf(msg, dma_buf);
+ i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred);
+
+The last argument 'xferred' controls if the buffer is synced back to the
+message or not. No syncing is needed in cases setting up DMA had an error and
+there was no data transferred.
The bounce buffer handling from the core is generic and simple. It will always
allocate a new bounce buffer. If you want a more sophisticated handling (e.g.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 25a4b4cf04a6..92999d4e0cb8 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -97,6 +97,11 @@ parameters may be changed at runtime by the command
allowing boot to proceed. none ignores them, expecting
user space to do the scan.
+ scsi_mod.use_blk_mq=
+ [SCSI] use blk-mq I/O path by default
+ See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig.
+ Format: <y/n>
+
sim710= [SCSI,HW]
See header of drivers/scsi/sim710.c.
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.