diff options
Diffstat (limited to 'Documentation')
117 files changed, 1375 insertions, 955 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata index 2f726c914752..3daecac48964 100644 --- a/Documentation/ABI/testing/sysfs-ata +++ b/Documentation/ABI/testing/sysfs-ata @@ -107,13 +107,14 @@ Description: described in ATA8 7.16 and 7.17. Only valid if the device is not a PM. - pio_mode: (RO) Transfer modes supported by the device when - in PIO mode. Mostly used by PATA device. + pio_mode: (RO) PIO transfer mode used by the device. + Mostly used by PATA devices. - xfer_mode: (RO) Current transfer mode + xfer_mode: (RO) Current transfer mode. Mostly used by + PATA devices. - dma_mode: (RO) Transfer modes supported by the device when - in DMA mode. Mostly used by PATA device. + dma_mode: (RO) DMA transfer mode used by the device. + Mostly used by PATA devices. class: (RO) Device class. Can be "ata" for disk, "atapi" for packet device, "pmp" for PM, or diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2ad01cad7f1c..bcc974d276dc 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -526,6 +526,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/srbds /sys/devices/system/cpu/vulnerabilities/tsx_async_abort /sys/devices/system/cpu/vulnerabilities/itlb_multihit + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data Date: January 2018 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: Information about CPU vulnerabilities diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator index 42214b4ff14a..90596d8bb51c 100644 --- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator +++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator @@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls DDR Backup Mode must be explicitly enabled by the user, to invoke step 1. - See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt. + See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. Users: User space applications for embedded boards equipped with a BD9571MWV PMIC. diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index 8cbc711cda93..4df436e7c417 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -17,3 +17,4 @@ are configurable at compile, boot or run time. special-register-buffer-data-sampling.rst core-scheduling.rst l1d_flush.rst + processor_mmio_stale_data.rst diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst new file mode 100644 index 000000000000..9393c50b5afc --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst @@ -0,0 +1,246 @@ +========================================= +Processor MMIO Stale Data Vulnerabilities +========================================= + +Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O +(MMIO) vulnerabilities that can expose data. The sequences of operations for +exposing data range from simple to very complex. Because most of the +vulnerabilities require the attacker to have access to MMIO, many environments +are not affected. System environments using virtualization where MMIO access is +provided to untrusted guests may need mitigation. These vulnerabilities are +not transient execution attacks. However, these vulnerabilities may propagate +stale data into core fill buffers where the data can subsequently be inferred +by an unmitigated transient execution attack. Mitigation for these +vulnerabilities includes a combination of microcode update and software +changes, depending on the platform and usage model. Some of these mitigations +are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or +those used to mitigate Special Register Buffer Data Sampling (SRBDS). + +Data Propagators +================ +Propagators are operations that result in stale data being copied or moved from +one microarchitectural buffer or register to another. Processor MMIO Stale Data +Vulnerabilities are operations that may result in stale data being directly +read into an architectural, software-visible state or sampled from a buffer or +register. + +Fill Buffer Stale Data Propagator (FBSDP) +----------------------------------------- +Stale data may propagate from fill buffers (FB) into the non-coherent portion +of the uncore on some non-coherent writes. Fill buffer propagation by itself +does not make stale data architecturally visible. Stale data must be propagated +to a location where it is subject to reading or sampling. + +Sideband Stale Data Propagator (SSDP) +------------------------------------- +The sideband stale data propagator (SSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. The sideband response buffer is +shared by all client cores. For non-coherent reads that go to sideband +destinations, the uncore logic returns 64 bytes of data to the core, including +both requested data and unrequested stale data, from a transaction buffer and +the sideband response buffer. As a result, stale data from the sideband +response and transaction buffers may now reside in a core fill buffer. + +Primary Stale Data Propagator (PSDP) +------------------------------------ +The primary stale data propagator (PSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. Similar to the sideband response +buffer, the primary response buffer is shared by all client cores. For some +processors, MMIO primary reads will return 64 bytes of data to the core fill +buffer including both requested data and unrequested stale data. This is +similar to the sideband stale data propagator. + +Vulnerabilities +=============== +Device Register Partial Write (DRPW) (CVE-2022-21166) +----------------------------------------------------- +Some endpoint MMIO registers incorrectly handle writes that are smaller than +the register size. Instead of aborting the write or only copying the correct +subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than +specified by the write transaction may be written to the register. On +processors affected by FBSDP, this may expose stale data from the fill buffers +of the core that created the write transaction. + +Shared Buffers Data Sampling (SBDS) (CVE-2022-21125) +---------------------------------------------------- +After propagators may have moved data around the uncore and copied stale data +into client core fill buffers, processors affected by MFBDS can leak data from +the fill buffer. It is limited to the client (including Intel Xeon server E3) +uncore implementation. + +Shared Buffers Data Read (SBDR) (CVE-2022-21123) +------------------------------------------------ +It is similar to Shared Buffer Data Sampling (SBDS) except that the data is +directly read into the architectural software-visible state. It is limited to +the client (including Intel Xeon server E3) uncore implementation. + +Affected Processors +=================== +Not all the CPUs are affected by all the variants. For instance, most +processors for the server market (excluding Intel Xeon E3 processors) are +impacted by only Device Register Partial Write (DRPW). + +Below is the list of affected Intel processors [#f1]_: + + =================== ============ ========= + Common name Family_Model Steppings + =================== ============ ========= + HASWELL_X 06_3FH 2,4 + SKYLAKE_L 06_4EH 3 + BROADWELL_X 06_4FH All + SKYLAKE_X 06_55H 3,4,6,7,11 + BROADWELL_D 06_56H 3,4,5 + SKYLAKE 06_5EH 3 + ICELAKE_X 06_6AH 4,5,6 + ICELAKE_D 06_6CH 1 + ICELAKE_L 06_7EH 5 + ATOM_TREMONT_D 06_86H All + LAKEFIELD 06_8AH 1 + KABYLAKE_L 06_8EH 9 to 12 + ATOM_TREMONT 06_96H 1 + ATOM_TREMONT_L 06_9CH 0 + KABYLAKE 06_9EH 9 to 13 + COMETLAKE 06_A5H 2,3,5 + COMETLAKE_L 06_A6H 0,1 + ROCKETLAKE 06_A7H 1 + =================== ============ ========= + +If a CPU is in the affected processor list, but not affected by a variant, it +is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later +section, mitigation largely remains the same for all the variants, i.e. to +clear the CPU fill buffers via VERW instruction. + +New bits in MSRs +================ +Newer processors and microcode update on existing affected processors added new +bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate +specific variants of Processor MMIO Stale Data vulnerabilities and mitigation +capability. + +MSR IA32_ARCH_CAPABILITIES +-------------------------- +Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the + Shared Buffers Data Read (SBDR) vulnerability or the sideband stale + data propagator (SSDP). +Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer + Stale Data Propagator (FBSDP). +Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data + Propagator (PSDP). +Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer + values as part of MD_CLEAR operations. Processors that do not + enumerate MDS_NO (meaning they are affected by MDS) but that do + enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate + FB_CLEAR as part of their MD_CLEAR support. +Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR + IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS + bit can be set to cause the VERW instruction to not perform the + FB_CLEAR action. Not all processors that support FB_CLEAR will support + FB_CLEAR_CTRL. + +MSR IA32_MCU_OPT_CTRL +--------------------- +Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR +action. This may be useful to reduce the performance impact of FB_CLEAR in +cases where system software deems it warranted (for example, when performance +is more critical, or the untrusted software has no MMIO access). Note that +FB_CLEAR_DIS has no impact on enumeration (for example, it does not change +FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors +that enumerate FB_CLEAR. + +Mitigation +========== +Like MDS, all variants of Processor MMIO Stale Data vulnerabilities have the +same mitigation strategy to force the CPU to clear the affected buffers before +an attacker can extract the secrets. + +This is achieved by using the otherwise unused and obsolete VERW instruction in +combination with a microcode update. The microcode clears the affected CPU +buffers when the VERW instruction is executed. + +Kernel reuses the MDS function to invoke the buffer clearing: + + mds_clear_cpu_buffers() + +On MDS affected CPUs, the kernel already invokes CPU buffer clear on +kernel/userspace, hypervisor/guest and C-state (idle) transitions. No +additional mitigation is needed on such CPUs. + +For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker +with MMIO capability. Therefore, VERW is not required for kernel/userspace. For +virtualization case, VERW is only needed at VMENTER for a guest with MMIO +capability. + +Mitigation points +----------------- +Return to user space +^^^^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation +needed. + +C-State transition +^^^^^^^^^^^^^^^^^^ +Control register writes by CPU during C-state transition can propagate data +from fill buffer to uncore buffers. Execute VERW before C-state transition to +clear CPU fill buffers. + +Guest entry point +^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise +execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by +MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO +Stale Data vulnerabilities, so there is no need to execute VERW for such guests. + +Mitigation control on the kernel command line +--------------------------------------------- +The kernel command line allows to control the Processor MMIO Stale Data +mitigations at boot time with the option "mmio_stale_data=". The valid +arguments for this option are: + + ========== ================================================================= + full If the CPU is vulnerable, enable mitigation; CPU buffer clearing + on exit to userspace and when entering a VM. Idle transitions are + protected as well. It does not automatically disable SMT. + full,nosmt Same as full, with SMT disabled on vulnerable CPUs. This is the + complete mitigation. + off Disables mitigation completely. + ========== ================================================================= + +If the CPU is affected and mmio_stale_data=off is not supplied on the kernel +command line, then the kernel selects the appropriate mitigation. + +Mitigation status information +----------------------------- +The Linux kernel provides a sysfs interface to enumerate the current +vulnerability status of the system: whether the system is vulnerable, and +which mitigations are active. The relevant sysfs file is: + + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The processor is vulnerable, but microcode is not updated. The + mitigation is enabled on a best effort basis. + * - 'Mitigation: Clear CPU buffers' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + +If the processor is vulnerable then the following information is appended to +the above information: + + ======================== =========================================== + 'SMT vulnerable' SMT is enabled + 'SMT disabled' SMT is disabled + 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown + ======================== =========================================== + +References +---------- +.. [#f1] Affected Processors + https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8090130b544b..2522b11e593f 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2469,7 +2469,6 @@ protected: nVHE-based mode with support for guests whose state is kept private from the host. - Not valid if the kernel is running in EL2. Defaults to VHE/nVHE based on hardware support. Setting mode to "protected" will disable kexec and hibernation @@ -3176,6 +3175,7 @@ srbds=off [X86,INTEL] no_entry_flush [PPC] no_uaccess_flush [PPC] + mmio_stale_data=off [X86] Exceptions: This does not have any effect on @@ -3197,6 +3197,7 @@ Equivalent to: l1tf=flush,nosmt [X86] mds=full,nosmt [X86] tsx_async_abort=full,nosmt [X86] + mmio_stale_data=full,nosmt [X86] mminit_loglevel= [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this @@ -3206,6 +3207,40 @@ log everything. Information is printed at KERN_DEBUG so loglevel=8 may also need to be specified. + mmio_stale_data= + [X86,INTEL] Control mitigation for the Processor + MMIO Stale Data vulnerabilities. + + Processor MMIO Stale Data is a class of + vulnerabilities that may expose data after an MMIO + operation. Exposed data could originate or end in + the same CPU buffers as affected by MDS and TAA. + Therefore, similar to MDS and TAA, the mitigation + is to clear the affected CPU buffers. + + This parameter controls the mitigation. The + options are: + + full - Enable mitigation on vulnerable CPUs + + full,nosmt - Enable mitigation and disable SMT on + vulnerable CPUs. + + off - Unconditionally disable mitigation + + On MDS or TAA affected machines, + mmio_stale_data=off can be prevented by an active + MDS or TAA mitigation as these vulnerabilities are + mitigated with the same mechanism so in order to + disable this mitigation, you need to specify + mds=off and tsx_async_abort=off too. + + Not specifying this option is equivalent to + mmio_stale_data=full. + + For details see: + Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst + module.sig_enforce [KNL] When CONFIG_MODULE_SIG is set, this means that modules without (valid) signatures will fail to load. diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst index b256f9783883..1dc6c39220f9 100644 --- a/Documentation/arm/tcm.rst +++ b/Documentation/arm/tcm.rst @@ -34,7 +34,7 @@ CPU so it is usually wise not to overlap any physical RAM with the TCM. The TCM memory can then be remapped to another address again using -the MMU, but notice that the TCM if often used in situations where +the MMU, but notice that the TCM is often used in situations where the MMU is turned off. To avoid confusion the current Linux implementation will map the TCM 1 to 1 from physical to virtual memory in the location specified by the kernel. Currently Linux diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst index 8ba677b87e90..937147f58cc5 100644 --- a/Documentation/arm64/sme.rst +++ b/Documentation/arm64/sme.rst @@ -371,7 +371,7 @@ The regset data starts with struct user_za_header, containing: Appendix A. SME programmer's model (informative) ================================================= -This section provides a minimal description of the additions made by SVE to the +This section provides a minimal description of the additions made by SME to the ARMv8-A programmer's model that are relevant to this document. Note: This section is for information only and not intended to be complete or diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index be66f1e8b547..7c331bfbe370 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -45,7 +45,7 @@ description: | The case where SH and SP are both 1 is likely not very interesting. maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt index 73470ecd1f12..ce91a9197697 100644 --- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt +++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt @@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node. firmware. On some SoCs, this firmware supports DFS and DVFS in addition to Adaptive Voltage Scaling. -[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml Node brcm,avs-cpu-data-mem diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml index 795a08ac9f12..2a17ec6fc97c 100644 --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml @@ -71,11 +71,6 @@ properties: - description: number of output lines for the green channel (G) - description: number of output lines for the blue channel (B) - arm,malidp-arqos-high-level: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - integer describing the ARQoS levels of DP500's QoS signaling - arm,malidp-arqos-value: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -113,7 +108,7 @@ examples: clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; + arm,malidp-arqos-value = <0xd000d000>; port { dp0_output: endpoint { diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index b41991eaa454..d3c3e4b07897 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7180 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 6e417d06fc79..f427eec3d3a4 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7280 maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 1a42491efdbc..2bb8896beffc 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SDM845 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 7095ec3c890d..880bfe930830 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI controller maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: "../dsi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 2d5a766d028f..716f921e3532 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 10nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 81dbee4803c0..1342d74ecfe0 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 14nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index b8de785ce815..9c1f9140c731 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 20nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 69eecaa64b18..3d8540a06fe2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 28nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 502bdda90235..76d40f7933dd 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Description of Qualcomm Display DSI PHY common dt properties maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | This defines the DSI PHY dt properties which are common for all diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml index fe0ac08faa1a..0e8ddf0ad789 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml @@ -40,9 +40,8 @@ properties: value to be used for converting remote channel measurements to temperature. $ref: /schemas/types.yaml#/definitions/int32 - items: - minimum: -128 - maximum: 127 + minimum: -128 + maximum: 127 ti,beta-compensation: description: diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt index 9c27ed694bbb..4a4df4ffc460 100644 --- a/Documentation/devicetree/bindings/hwmon/vexpress.txt +++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt @@ -9,7 +9,7 @@ Requires node properties: "arm,vexpress-power" "arm,vexpress-energy" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Optional node properties: diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml new file mode 100644 index 000000000000..be1539d234f9 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xen specific IOMMU for virtualized devices (e.g. virtio) + +maintainers: + - Stefano Stabellini <sstabellini@kernel.org> + +description: + The Xen IOMMU represents the Xen grant table interface. Grant mappings + are to be used with devices connected to the Xen IOMMU using the "iommus" + property, which also specifies the ID of the backend domain. + The binding is required to restrict memory access using Xen grant mappings. + +properties: + compatible: + const: xen,grant-dma + + '#iommu-cells': + const: 1 + description: + The single cell is the domid (domain ID) of the domain where the backend + is running. + +required: + - compatible + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu { + compatible = "xen,grant-dma"; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index c7cfa6c2cd81..935d63d181d9 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -150,7 +150,6 @@ allOf: description: 5 memory controller channels and 1 for stream-id registers reg-names: - maxItems: 6 items: - const: sid - const: broadcast @@ -170,7 +169,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast @@ -202,7 +200,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml index 74a6867d3c82..edac14af101e 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> description: | MAX77714 is a Power Management IC with 4 buck regulators, 9 diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index b672202fff4e..5ecdac9de484 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -75,7 +75,6 @@ examples: sd-uhs-sdr104; sdhci,auto-cmd12; interrupts = <0x0 0x26 0x4>; - interrupt-names = "sdio0_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; @@ -94,7 +93,6 @@ examples: non-removable; bus-width = <0x8>; interrupts = <0x0 0x27 0x4>; - interrupt-names = "sdio1_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index c79639e9027e..3ee758886558 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -56,6 +56,9 @@ properties: - const: core - const: axi + interrupts: + maxItems: 1 + marvell,xenon-sdhc-id: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 @@ -145,7 +148,6 @@ allOf: items: - description: Xenon IP registers - description: Armada 3700 SoC PHY PAD Voltage Control register - minItems: 2 marvell,pad-type: $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml index ddff9233b159..34dd1cc67124 100644 --- a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml @@ -55,7 +55,6 @@ properties: maxItems: 1 apple,sart: - maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle description: | Reference to the SART address filter. diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt index de6a706abcdb..35f03df00130 100644 --- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -9,7 +9,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the whole phy and one for the port - reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 60dc27834e1d..b078009ed509 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QMP USB3 DP PHY controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 0ab3dad3f121..d68ab49345b8 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QUSB2 phy controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251de0855..7a0e6a9854da 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Synopsys Femto High-Speed USB PHY V2 maintainers: - - Wesley Cheng <wcheng@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: | Qualcomm High-Speed USB PHY diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index cbcbd31e3ce8..939cb5b6ffea 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: ------------------- diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 4d820df24b89..6f17f3991640 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -32,31 +32,37 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, spi, wdt, + # For MT7620 SoC - ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, - uartf, uartlite, wdt, wled, + ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk, + uartf, uartlite, wled, # For MT7628 and MT7688 SoCs - gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, - pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, - wdt, wled_an, wled_kn, + pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2, + wled_an, wled_kn, ] function: description: The mux function to select. enum: [ + # common + gpio, i2c, refclk, spi, + # For MT7620 SoC - ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, - pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, - rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, + rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk, wdt rst, wled, # For MT7628 and MT7688 SoCs - antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + antenna, debug, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, - refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, ] diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 425401c54269..f602a5d6e13a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -33,32 +33,29 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite, + # For RT3050, RT3052 and RT3350 SoCs - i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, - uartlite, - - # For RT5350 SoC - i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + lna, pa ] function: description: The mux function to select. enum: [ + # common + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + # For RT3050, RT3052 and RT3350 SoCs - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, - pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, - pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, - uartlite, wdg_cs1, - - # For RT5350 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, - pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + lna, pa ] required: diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml index 675b9b26d233..f23dcc50793e 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX77976 Battery charger maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> description: | The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 12ed98c28aaa..dbe78cd4adba 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: The Qualcomm PMIC VBUS output regulator driver maintainers: - - Wesley Cheng <wcheng@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: | This regulator driver controls the VBUS output by the Qualcomm PMIC. This diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt index d775f72487aa..1c2e92c7831e 100644 --- a/Documentation/devicetree/bindings/regulator/vexpress.txt +++ b/Documentation/devicetree/bindings/regulator/vexpress.txt @@ -4,7 +4,7 @@ Versatile Express voltage regulators Requires node properties: - "compatible" value: "arm,vexpress-volt" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Required regulator properties: diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index bf73de0d5b4a..4aa368447b1e 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -13,7 +13,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the powerdown and softreset lines of the usb3 IP - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt - #address-cells, #size-cells : should be '1' if the device has sub-nodes diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 065c91d955ad..d6f2bdee20fc 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle + reset specifier pairs to the powerdown and softreset lines of the USB IP - reset-names : should be "power" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 44c998c16f85..1c735573abc0 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle to the powerdown and reset controller for the USB IP - reset-names : should be "power" and "softreset". -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e336fe2e03cc..749e1963ddbb 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6bb20b4554d7..0496773a3c4d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -143,6 +143,9 @@ patternProperties: description: ASPEED Technology Inc. "^asus,.*": description: AsusTek Computer Inc. + "^atheros,.*": + description: Qualcomm Atheros, Inc. (deprecated, use qca) + deprecated: true "^atlas,.*": description: Atlas Scientific LLC "^atmel,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index cbcf19f51411..ed6c1ca80dcc 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -64,7 +64,6 @@ if: then: properties: clocks: - minItems: 2 items: - description: High-frequency oscillator input, divided internally - description: Low-frequency oscillator input diff --git a/Documentation/hte/hte.rst b/Documentation/driver-api/hte/hte.rst index 153f3233c100..153f3233c100 100644 --- a/Documentation/hte/hte.rst +++ b/Documentation/driver-api/hte/hte.rst diff --git a/Documentation/hte/index.rst b/Documentation/driver-api/hte/index.rst index 9f43301c05dc..9f43301c05dc 100644 --- a/Documentation/hte/index.rst +++ b/Documentation/driver-api/hte/index.rst diff --git a/Documentation/hte/tegra194-hte.rst b/Documentation/driver-api/hte/tegra194-hte.rst index 41983e04d2a0..41983e04d2a0 100644 --- a/Documentation/hte/tegra194-hte.rst +++ b/Documentation/driver-api/hte/tegra194-hte.rst diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index d76a60d95b58..a6d525cd9fc4 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -108,6 +108,7 @@ available subsections can be seen below. xilinx/index xillybus zorro + hte/index .. only:: subproject and html diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt index 10482dee8703..a053667a7a8c 100644 --- a/Documentation/features/core/cBPF-JIT/arch-support.txt +++ b/Documentation/features/core/cBPF-JIT/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt index bcefb5afc7d6..c0bb9c92937f 100644 --- a/Documentation/features/core/eBPF-JIT/arch-support.txt +++ b/Documentation/features/core/eBPF-JIT/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index d80d99449ac1..c9bfff292816 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 53eab154925d..35e2a44b1448 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/thread-info-in-task/arch-support.txt b/Documentation/features/core/thread-info-in-task/arch-support.txt index 94926451afb9..9b3e2ce12b44 100644 --- a/Documentation/features/core/thread-info-in-task/arch-support.txt +++ b/Documentation/features/core/thread-info-in-task/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index b4274b8141b6..9c7ffec5d51d 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index c15bb4b21b6f..2fd5fb6f5f23 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt index 4c31fc92a312..c45711e55c7b 100644 --- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -13,12 +13,13 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | | nios2: | TODO | | openrisc: | TODO | - | parisc: | TODO | + | parisc: | ok | | powerpc: | ok | | riscv: | ok | | s390: | ok | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index d7a5ac4bc1fe..502c1d409648 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | @@ -24,7 +25,7 @@ | s390: | ok | | sh: | ok | | sparc: | TODO | - | um: | TODO | + | um: | ok | | x86: | ok | | xtensa: | TODO | ----------------------- diff --git a/Documentation/features/debug/kcov/arch-support.txt b/Documentation/features/debug/kcov/arch-support.txt index 136e14c2b603..afb90bebded2 100644 --- a/Documentation/features/debug/kcov/arch-support.txt +++ b/Documentation/features/debug/kcov/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 5b3f3d8ae462..04120d278c22 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | ok | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt index 7a2eab4fdf9d..e487c356ab20 100644 --- a/Documentation/features/debug/kmemleak/arch-support.txt +++ b/Documentation/features/debug/kmemleak/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index db02ab194138..b3697f4c806e 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index ec186e7deebc..452385ac9e06 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 4b7865e693f6..daecf046e72b 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index 5d9befa041c7..adb1bd055bfd 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index d97fd38460e6..ddcd7161d14c 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index d30e3475904e..25121200f9f9 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 9ae1fa2eb27c..f2fcff8e77b7 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 9e09988eb654..95e485c87e36 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 5c4ec316dbac..8b1a8d9e1c79 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index 65007c1ac44f..ab69e8f56a37 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index 20056670fb09..0bfb72a08d82 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | @@ -20,7 +21,7 @@ | openrisc: | ok | | parisc: | TODO | | powerpc: | ok | - | riscv: | TODO | + | riscv: | ok | | s390: | TODO | | sh: | TODO | | sparc: | ok | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 707514faac7b..d2f2201febc8 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 9f31ce9b9f2a..0d0647b06762 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -7,12 +7,13 @@ | arch |status| ----------------------- | alpha: | TODO | - | arc: | TODO | + | arc: | ok | | arm: | ok | | arm64: | ok | | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index f148c4329c7a..13c297bbf05c 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 32c88b6a910c..931687eec671 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index d82a1f0cdc91..336d728b8a45 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -36,6 +36,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index 2687564e5fa8..76d012118372 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -13,6 +13,7 @@ | csky: | .. | | hexagon: | .. | | ia64: | TODO | + | loong: | ok | | m68k: | .. | | microblaze: | .. | | mips: | TODO | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index 1b4109199e9d..a86b8b1f3d10 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 27327256bd05..364169f00ee2 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index b9a4bda2c8f5..6ea274790e47 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index 4aa51c9fa32b..c9e0a16290e6 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 0306ece41faa..fd17d8de5ef1 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | .. | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index 5d64e40c0092..1a859ac05e9e 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 92c9db24a6a3..b1229953391b 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 7424fea37614..02f325fbfcd0 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index 60985067626b..9bfff977ef55 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -13,6 +13,7 @@ | csky: | .. | | hexagon: | .. | | ia64: | TODO | + | loong: | ok | | m68k: | .. | | microblaze: | .. | | mips: | ok | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index f2dcbec6020e..039e4e91ada3 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | .. | | microblaze: | .. | | mips: | TODO | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index 680090df03e1..13b4940e0c3a 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 205a90e82050..b01bf7bca3e6 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index 9f16d6e4e11e..fc3687b5e89b 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -13,12 +13,13 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | | nios2: | TODO | | openrisc: | TODO | - | parisc: | TODO | + | parisc: | ok | | powerpc: | ok | | riscv: | ok | | s390: | ok | diff --git a/Documentation/filesystems/ext4/attributes.rst b/Documentation/filesystems/ext4/attributes.rst index 871d2da7a0a9..87814696a65b 100644 --- a/Documentation/filesystems/ext4/attributes.rst +++ b/Documentation/filesystems/ext4/attributes.rst @@ -13,8 +13,8 @@ disappeared as of Linux 3.0. There are two places where extended attributes can be found. The first place is between the end of each inode entry and the beginning of the -next inode entry. For example, if inode.i\_extra\_isize = 28 and -sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes +next inode entry. For example, if inode.i_extra_isize = 28 and +sb.inode_size = 256, then there are 256 - (128 + 28) = 100 bytes available for in-inode extended attribute storage. The second place where extended attributes can be found is in the block pointed to by ``inode.i_file_acl``. As of Linux 3.11, it is not possible for this @@ -38,8 +38,8 @@ Extended attributes, when stored after the inode, have a header - Name - Description * - 0x0 - - \_\_le32 - - h\_magic + - __le32 + - h_magic - Magic number for identification, 0xEA020000. This value is set by the Linux driver, though e2fsprogs doesn't seem to check it(?) @@ -55,28 +55,28 @@ The beginning of an extended attribute block is in - Name - Description * - 0x0 - - \_\_le32 - - h\_magic + - __le32 + - h_magic - Magic number for identification, 0xEA020000. * - 0x4 - - \_\_le32 - - h\_refcount + - __le32 + - h_refcount - Reference count. * - 0x8 - - \_\_le32 - - h\_blocks + - __le32 + - h_blocks - Number of disk blocks used. * - 0xC - - \_\_le32 - - h\_hash + - __le32 + - h_hash - Hash value of all attributes. * - 0x10 - - \_\_le32 - - h\_checksum + - __le32 + - h_checksum - Checksum of the extended attribute block. * - 0x14 - - \_\_u32 - - h\_reserved[3] + - __u32 + - h_reserved[3] - Zero. The checksum is calculated against the FS UUID, the 64-bit block number @@ -100,46 +100,46 @@ Attributes stored inside an inode do not need be stored in sorted order. - Name - Description * - 0x0 - - \_\_u8 - - e\_name\_len + - __u8 + - e_name_len - Length of name. * - 0x1 - - \_\_u8 - - e\_name\_index + - __u8 + - e_name_index - Attribute name index. There is a discussion of this below. * - 0x2 - - \_\_le16 - - e\_value\_offs + - __le16 + - e_value_offs - Location of this attribute's value on the disk block where it is stored. Multiple attributes can share the same value. For an inode attribute this value is relative to the start of the first entry; for a block this value is relative to the start of the block (i.e. the header). * - 0x4 - - \_\_le32 - - e\_value\_inum + - __le32 + - e_value_inum - The inode where the value is stored. Zero indicates the value is in the same block as this entry. This field is only used if the - INCOMPAT\_EA\_INODE feature is enabled. + INCOMPAT_EA_INODE feature is enabled. * - 0x8 - - \_\_le32 - - e\_value\_size + - __le32 + - e_value_size - Length of attribute value. * - 0xC - - \_\_le32 - - e\_hash + - __le32 + - e_hash - Hash value of attribute name and attribute value. The kernel doesn't update the hash for in-inode attributes, so for that case this value must be zero, because e2fsck validates any non-zero hash regardless of where the xattr lives. * - 0x10 - char - - e\_name[e\_name\_len] + - e_name[e_name_len] - Attribute name. Does not include trailing NULL. Attribute values can follow the end of the entry table. There appears to be a requirement that they be aligned to 4-byte boundaries. The values are stored starting at the end of the block and grow towards the -xattr\_header/xattr\_entry table. When the two collide, the overflow is +xattr_header/xattr_entry table. When the two collide, the overflow is put into a separate disk block. If the disk block fills up, the filesystem returns -ENOSPC. @@ -167,15 +167,15 @@ the key name. Here is a map of name index values to key prefixes: * - 1 - “user.” * - 2 - - “system.posix\_acl\_access” + - “system.posix_acl_access” * - 3 - - “system.posix\_acl\_default” + - “system.posix_acl_default” * - 4 - “trusted.” * - 6 - “security.” * - 7 - - “system.” (inline\_data only?) + - “system.” (inline_data only?) * - 8 - “system.richacl” (SuSE kernels only?) diff --git a/Documentation/filesystems/ext4/bigalloc.rst b/Documentation/filesystems/ext4/bigalloc.rst index 72075aa608e4..976a180b209c 100644 --- a/Documentation/filesystems/ext4/bigalloc.rst +++ b/Documentation/filesystems/ext4/bigalloc.rst @@ -23,7 +23,7 @@ means that a block group addresses 32 gigabytes instead of 128 megabytes, also shrinking the amount of file system overhead for metadata. The administrator can set a block cluster size at mkfs time (which is -stored in the s\_log\_cluster\_size field in the superblock); from then +stored in the s_log_cluster_size field in the superblock); from then on, the block bitmaps track clusters, not individual blocks. This means that block groups can be several gigabytes in size (instead of just 128MiB); however, the minimum allocation unit becomes a cluster, not a diff --git a/Documentation/filesystems/ext4/bitmaps.rst b/Documentation/filesystems/ext4/bitmaps.rst index c7546dbc197a..91c45d86e9bb 100644 --- a/Documentation/filesystems/ext4/bitmaps.rst +++ b/Documentation/filesystems/ext4/bitmaps.rst @@ -9,15 +9,15 @@ group. The inode bitmap records which entries in the inode table are in use. As with most bitmaps, one bit represents the usage status of one data -block or inode table entry. This implies a block group size of 8 \* -number\_of\_bytes\_in\_a\_logical\_block. +block or inode table entry. This implies a block group size of 8 * +number_of_bytes_in_a_logical_block. NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts of the kernel and e2fsprogs code pretends that the block bitmap contains zeros (i.e. all blocks in the group are free). However, it is not necessarily the case that no blocks are in use -- if ``meta_bg`` is set, the bitmaps and group descriptor live inside the group. Unfortunately, -ext2fs\_test\_block\_bitmap2() will return '0' for those locations, +ext2fs_test_block_bitmap2() will return '0' for those locations, which produces confusing debugfs output. Inode Table diff --git a/Documentation/filesystems/ext4/blockgroup.rst b/Documentation/filesystems/ext4/blockgroup.rst index d5d652addce5..46d78f860623 100644 --- a/Documentation/filesystems/ext4/blockgroup.rst +++ b/Documentation/filesystems/ext4/blockgroup.rst @@ -56,39 +56,39 @@ established that the super block and the group descriptor table, if present, will be at the beginning of the block group. The bitmaps and the inode table can be anywhere, and it is quite possible for the bitmaps to come after the inode table, or for both to be in different -groups (flex\_bg). Leftover space is used for file data blocks, indirect +groups (flex_bg). Leftover space is used for file data blocks, indirect block maps, extent tree blocks, and extended attributes. Flexible Block Groups --------------------- Starting in ext4, there is a new feature called flexible block groups -(flex\_bg). In a flex\_bg, several block groups are tied together as one +(flex_bg). In a flex_bg, several block groups are tied together as one logical block group; the bitmap spaces and the inode table space in the -first block group of the flex\_bg are expanded to include the bitmaps -and inode tables of all other block groups in the flex\_bg. For example, -if the flex\_bg size is 4, then group 0 will contain (in order) the +first block group of the flex_bg are expanded to include the bitmaps +and inode tables of all other block groups in the flex_bg. For example, +if the flex_bg size is 4, then group 0 will contain (in order) the superblock, group descriptors, data block bitmaps for groups 0-3, inode bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining space in group 0 is for file data. The effect of this is to group the block group metadata close together for faster loading, and to enable large files to be continuous on disk. Backup copies of the superblock and group descriptors are always at the beginning of block groups, even -if flex\_bg is enabled. The number of block groups that make up a -flex\_bg is given by 2 ^ ``sb.s_log_groups_per_flex``. +if flex_bg is enabled. The number of block groups that make up a +flex_bg is given by 2 ^ ``sb.s_log_groups_per_flex``. Meta Block Groups ----------------- -Without the option META\_BG, for safety concerns, all block group +Without the option META_BG, for safety concerns, all block group descriptors copies are kept in the first block group. Given the default 128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4 can have at most 2^27/64 = 2^21 block groups. This limits the entire filesystem size to 2^21 * 2^27 = 2^48bytes or 256TiB. The solution to this problem is to use the metablock group feature -(META\_BG), which is already in ext3 for all 2.6 releases. With the -META\_BG feature, ext4 filesystems are partitioned into many metablock +(META_BG), which is already in ext3 for all 2.6 releases. With the +META_BG feature, ext4 filesystems are partitioned into many metablock groups. Each metablock group is a cluster of block groups whose group descriptor structures can be stored in a single disk block. For ext4 filesystems with 4 KB block size, a single metablock group partition @@ -110,7 +110,7 @@ bytes, a meta-block group contains 32 block groups for filesystems with a 1KB block size, and 128 block groups for filesystems with a 4KB blocksize. Filesystems can either be created using this new block group descriptor layout, or existing filesystems can be resized on-line, and -the field s\_first\_meta\_bg in the superblock will indicate the first +the field s_first_meta_bg in the superblock will indicate the first block group using this new layout. Please see an important note about ``BLOCK_UNINIT`` in the section about @@ -121,15 +121,15 @@ Lazy Block Group Initialization A new feature for ext4 are three block group descriptor flags that enable mkfs to skip initializing other parts of the block group -metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean +metadata. Specifically, the INODE_UNINIT and BLOCK_UNINIT flags mean that the inode and block bitmaps for that group can be calculated and therefore the on-disk bitmap blocks are not initialized. This is generally the case for an empty block group or a block group containing -only fixed-location block group metadata. The INODE\_ZEROED flag means +only fixed-location block group metadata. The INODE_ZEROED flag means that the inode table has been initialized; mkfs will unset this flag and rely on the kernel to initialize the inode tables in the background. By not writing zeroes to the bitmaps and inode table, mkfs time is -reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM, -but the dumpe2fs output prints this as “uninit\_bg”. They are the same +reduced considerably. Note the feature flag is RO_COMPAT_GDT_CSUM, +but the dumpe2fs output prints this as “uninit_bg”. They are the same thing. diff --git a/Documentation/filesystems/ext4/blockmap.rst b/Documentation/filesystems/ext4/blockmap.rst index 30e25750d88a..2bd990402a5c 100644 --- a/Documentation/filesystems/ext4/blockmap.rst +++ b/Documentation/filesystems/ext4/blockmap.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 +---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| i.i\_block Offset | Where It Points | +| i.i_block Offset | Where It Points | +=====================+==============================================================================================================================================================================================================================+ | 0 to 11 | Direct map to file blocks 0 to 11. | +---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ diff --git a/Documentation/filesystems/ext4/checksums.rst b/Documentation/filesystems/ext4/checksums.rst index 5519e253810d..e232749daf5f 100644 --- a/Documentation/filesystems/ext4/checksums.rst +++ b/Documentation/filesystems/ext4/checksums.rst @@ -4,7 +4,7 @@ Checksums --------- Starting in early 2012, metadata checksums were added to all major ext4 -and jbd2 data structures. The associated feature flag is metadata\_csum. +and jbd2 data structures. The associated feature flag is metadata_csum. The desired checksum algorithm is indicated in the superblock, though as of October 2012 the only supported algorithm is crc32c. Some data structures did not have space to fit a full 32-bit checksum, so only the @@ -20,7 +20,7 @@ encounters directory blocks that lack sufficient empty space to add a checksum, it will request that you run ``e2fsck -D`` to have the directories rebuilt with checksums. This has the added benefit of removing slack space from the directory files and rebalancing the htree -indexes. If you \_ignore\_ this step, your directories will not be +indexes. If you _ignore_ this step, your directories will not be protected by a checksum! The following table describes the data elements that go into each type @@ -35,39 +35,39 @@ of checksum. The checksum function is whatever the superblock describes - Length - Ingredients * - Superblock - - \_\_le32 + - __le32 - The entire superblock up to the checksum field. The UUID lives inside the superblock. * - MMP - - \_\_le32 + - __le32 - UUID + the entire MMP block up to the checksum field. * - Extended Attributes - - \_\_le32 + - __le32 - UUID + the entire extended attribute block. The checksum field is set to zero. * - Directory Entries - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the directory block up to the fake entry enclosing the checksum field. * - HTREE Nodes - - \_\_le32 + - __le32 - UUID + inode number + inode generation + all valid extents + HTREE tail. The checksum field is set to zero. * - Extents - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the entire extent block up to the checksum field. * - Bitmaps - - \_\_le32 or \_\_le16 + - __le32 or __le16 - UUID + the entire bitmap. Checksums are stored in the group descriptor, and truncated if the group descriptor size is 32 bytes (i.e. ^64bit) * - Inodes - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the entire inode. The checksum field is set to zero. Each inode has its own checksum. * - Group Descriptors - - \_\_le16 - - If metadata\_csum, then UUID + group number + the entire descriptor; - else if gdt\_csum, then crc16(UUID + group number + the entire + - __le16 + - If metadata_csum, then UUID + group number + the entire descriptor; + else if gdt_csum, then crc16(UUID + group number + the entire descriptor). In all cases, only the lower 16 bits are stored. diff --git a/Documentation/filesystems/ext4/directory.rst b/Documentation/filesystems/ext4/directory.rst index 55f618b37144..6eece8e31df8 100644 --- a/Documentation/filesystems/ext4/directory.rst +++ b/Documentation/filesystems/ext4/directory.rst @@ -42,24 +42,24 @@ is at most 263 bytes long, though on disk you'll need to reference - Name - Description * - 0x0 - - \_\_le32 + - __le32 - inode - Number of the inode that this directory entry points to. * - 0x4 - - \_\_le16 - - rec\_len + - __le16 + - rec_len - Length of this directory entry. Must be a multiple of 4. * - 0x6 - - \_\_le16 - - name\_len + - __le16 + - name_len - Length of the file name. * - 0x8 - char - - name[EXT4\_NAME\_LEN] + - name[EXT4_NAME_LEN] - File name. Since file names cannot be longer than 255 bytes, the new directory -entry format shortens the name\_len field and uses the space for a file +entry format shortens the name_len field and uses the space for a file type flag, probably to avoid having to load every inode during directory tree traversal. This format is ``ext4_dir_entry_2``, which is at most 263 bytes long, though on disk you'll need to reference @@ -74,24 +74,24 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most - Name - Description * - 0x0 - - \_\_le32 + - __le32 - inode - Number of the inode that this directory entry points to. * - 0x4 - - \_\_le16 - - rec\_len + - __le16 + - rec_len - Length of this directory entry. * - 0x6 - - \_\_u8 - - name\_len + - __u8 + - name_len - Length of the file name. * - 0x7 - - \_\_u8 - - file\_type + - __u8 + - file_type - File type code, see ftype_ table below. * - 0x8 - char - - name[EXT4\_NAME\_LEN] + - name[EXT4_NAME_LEN] - File name. .. _ftype: @@ -137,19 +137,19 @@ entry uses this extension, it may be up to 271 bytes. - Name - Description * - 0x0 - - \_\_le32 + - __le32 - hash - The hash of the directory name * - 0x4 - - \_\_le32 - - minor\_hash + - __le32 + - minor_hash - The minor hash of the directory name In order to add checksums to these classic directory blocks, a phony ``struct ext4_dir_entry`` is placed at the end of each leaf block to hold the checksum. The directory entry is 12 bytes long. The inode -number and name\_len fields are set to zero to fool old software into +number and name_len fields are set to zero to fool old software into ignoring an apparently empty directory entry, and the checksum is stored in the place where the name normally goes. The structure is ``struct ext4_dir_entry_tail``: @@ -163,24 +163,24 @@ in the place where the name normally goes. The structure is - Name - Description * - 0x0 - - \_\_le32 - - det\_reserved\_zero1 + - __le32 + - det_reserved_zero1 - Inode number, which must be zero. * - 0x4 - - \_\_le16 - - det\_rec\_len + - __le16 + - det_rec_len - Length of this directory entry, which must be 12. * - 0x6 - - \_\_u8 - - det\_reserved\_zero2 + - __u8 + - det_reserved_zero2 - Length of the file name, which must be zero. * - 0x7 - - \_\_u8 - - det\_reserved\_ft + - __u8 + - det_reserved_ft - File type, which must be 0xDE. * - 0x8 - - \_\_le32 - - det\_checksum + - __le32 + - det_checksum - Directory leaf block checksum. The leaf directory block checksum is calculated against the FS UUID, the @@ -194,7 +194,7 @@ Hash Tree Directories A linear array of directory entries isn't great for performance, so a new feature was added to ext3 to provide a faster (but peculiar) balanced tree keyed off a hash of the directory entry name. If the -EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a +EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a hashed btree (htree) to organize and find directory entries. For backwards read-only compatibility with ext2, this tree is actually hidden inside the directory file, masquerading as “empty” directory data @@ -206,14 +206,14 @@ rest of the directory block is empty so that it moves on. The root of the tree always lives in the first data block of the directory. By ext2 custom, the '.' and '..' entries must appear at the beginning of this first block, so they are put here as two -``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of +``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of the root node contains metadata about the tree and finally a hash->block map to find nodes that are lower in the htree. If ``dx_root.info.indirect_levels`` is non-zero then the htree has two levels; the data block pointed to by the root node's map is an interior node, which is indexed by a minor hash. Interior nodes in this tree contains a zeroed out ``struct ext4_dir_entry_2`` followed by a -minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear +minor_hash->block map to find leafe nodes. Leaf nodes contain a linear array of all ``struct ext4_dir_entry_2``; all of these entries (presumably) hash to the same value. If there is an overflow, the entries simply overflow into the next leaf node, and the @@ -245,83 +245,83 @@ of a data block: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - dot.inode - inode number of this directory. * - 0x4 - - \_\_le16 - - dot.rec\_len + - __le16 + - dot.rec_len - Length of this record, 12. * - 0x6 - u8 - - dot.name\_len + - dot.name_len - Length of the name, 1. * - 0x7 - u8 - - dot.file\_type + - dot.file_type - File type of this entry, 0x2 (directory) (if the feature flag is set). * - 0x8 - char - dot.name[4] - - “.\\0\\0\\0” + - “.\0\0\0” * - 0xC - - \_\_le32 + - __le32 - dotdot.inode - inode number of parent directory. * - 0x10 - - \_\_le16 - - dotdot.rec\_len - - block\_size - 12. The record length is long enough to cover all htree + - __le16 + - dotdot.rec_len + - block_size - 12. The record length is long enough to cover all htree data. * - 0x12 - u8 - - dotdot.name\_len + - dotdot.name_len - Length of the name, 2. * - 0x13 - u8 - - dotdot.file\_type + - dotdot.file_type - File type of this entry, 0x2 (directory) (if the feature flag is set). * - 0x14 - char - - dotdot\_name[4] - - “..\\0\\0” + - dotdot_name[4] + - “..\0\0” * - 0x18 - - \_\_le32 - - struct dx\_root\_info.reserved\_zero + - __le32 + - struct dx_root_info.reserved_zero - Zero. * - 0x1C - u8 - - struct dx\_root\_info.hash\_version + - struct dx_root_info.hash_version - Hash type, see dirhash_ table below. * - 0x1D - u8 - - struct dx\_root\_info.info\_length + - struct dx_root_info.info_length - Length of the tree information, 0x8. * - 0x1E - u8 - - struct dx\_root\_info.indirect\_levels - - Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR + - struct dx_root_info.indirect_levels + - Depth of the htree. Cannot be larger than 3 if the INCOMPAT_LARGEDIR feature is set; cannot be larger than 2 otherwise. * - 0x1F - u8 - - struct dx\_root\_info.unused\_flags + - struct dx_root_info.unused_flags - * - 0x20 - - \_\_le16 + - __le16 - limit - - Maximum number of dx\_entries that can follow this header, plus 1 for + - Maximum number of dx_entries that can follow this header, plus 1 for the header itself. * - 0x22 - - \_\_le16 + - __le16 - count - - Actual number of dx\_entries that follow this header, plus 1 for the + - Actual number of dx_entries that follow this header, plus 1 for the header itself. * - 0x24 - - \_\_le32 + - __le32 - block - The block number (within the directory file) that goes with hash=0. * - 0x28 - - struct dx\_entry + - struct dx_entry - entries[0] - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. @@ -362,38 +362,38 @@ also the full length of a data block: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - fake.inode - Zero, to make it look like this entry is not in use. * - 0x4 - - \_\_le16 - - fake.rec\_len - - The size of the block, in order to hide all of the dx\_node data. + - __le16 + - fake.rec_len + - The size of the block, in order to hide all of the dx_node data. * - 0x6 - u8 - - name\_len + - name_len - Zero. There is no name for this “unused” directory entry. * - 0x7 - u8 - - file\_type + - file_type - Zero. There is no file type for this “unused” directory entry. * - 0x8 - - \_\_le16 + - __le16 - limit - - Maximum number of dx\_entries that can follow this header, plus 1 for + - Maximum number of dx_entries that can follow this header, plus 1 for the header itself. * - 0xA - - \_\_le16 + - __le16 - count - - Actual number of dx\_entries that follow this header, plus 1 for the + - Actual number of dx_entries that follow this header, plus 1 for the header itself. * - 0xE - - \_\_le32 + - __le32 - block - The block number (within the directory file) that goes with the lowest hash value of this block. This value is stored in the parent block. * - 0x12 - - struct dx\_entry + - struct dx_entry - entries[0] - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. @@ -410,11 +410,11 @@ long: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - hash - Hash code. * - 0x4 - - \_\_le32 + - __le32 - block - Block number (within the directory file, not filesystem blocks) of the next node in the htree. @@ -423,13 +423,13 @@ long: author.) If metadata checksums are enabled, the last 8 bytes of the directory -block (precisely the length of one dx\_entry) are used to store a +block (precisely the length of one dx_entry) are used to store a ``struct dx_tail``, which contains the checksum. The ``limit`` and -``count`` entries in the dx\_root/dx\_node structures are adjusted as -necessary to fit the dx\_tail into the block. If there is no space for -the dx\_tail, the user is notified to run e2fsck -D to rebuild the +``count`` entries in the dx_root/dx_node structures are adjusted as +necessary to fit the dx_tail into the block. If there is no space for +the dx_tail, the user is notified to run e2fsck -D to rebuild the directory index (which will ensure that there's space for the checksum. -The dx\_tail structure is 8 bytes long and looks like this: +The dx_tail structure is 8 bytes long and looks like this: .. list-table:: :widths: 8 8 24 40 @@ -441,13 +441,13 @@ The dx\_tail structure is 8 bytes long and looks like this: - Description * - 0x0 - u32 - - dt\_reserved + - dt_reserved - Zero. * - 0x4 - - \_\_le32 - - dt\_checksum + - __le32 + - dt_checksum - Checksum of the htree directory block. The checksum is calculated against the FS UUID, the htree index header -(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in -use, and the tail block (dx\_tail). +(dx_root or dx_node), all of the htree indices (dx_entry) that are in +use, and the tail block (dx_tail). diff --git a/Documentation/filesystems/ext4/eainode.rst b/Documentation/filesystems/ext4/eainode.rst index ecc0d01a0a72..7a2ef26b064a 100644 --- a/Documentation/filesystems/ext4/eainode.rst +++ b/Documentation/filesystems/ext4/eainode.rst @@ -5,14 +5,14 @@ Large Extended Attribute Values To enable ext4 to store extended attribute values that do not fit in the inode or in the single extended attribute block attached to an inode, -the EA\_INODE feature allows us to store the value in the data blocks of +the EA_INODE feature allows us to store the value in the data blocks of a regular file inode. This “EA inode” is linked only from the extended attribute name index and must not appear in a directory entry. The -inode's i\_atime field is used to store a checksum of the xattr value; -and i\_ctime/i\_version store a 64-bit reference count, which enables +inode's i_atime field is used to store a checksum of the xattr value; +and i_ctime/i_version store a 64-bit reference count, which enables sharing of large xattr values between multiple owning inodes. For backward compatibility with older versions of this feature, the -i\_mtime/i\_generation *may* store a back-reference to the inode number -and i\_generation of the **one** owning inode (in cases where the EA +i_mtime/i_generation *may* store a back-reference to the inode number +and i_generation of the **one** owning inode (in cases where the EA inode is not referenced by multiple inodes) to verify that the EA inode is the correct one being accessed. diff --git a/Documentation/filesystems/ext4/group_descr.rst b/Documentation/filesystems/ext4/group_descr.rst index 7ba6114e7f5c..392ec44f8fb0 100644 --- a/Documentation/filesystems/ext4/group_descr.rst +++ b/Documentation/filesystems/ext4/group_descr.rst @@ -7,34 +7,34 @@ Each block group on the filesystem has one of these descriptors associated with it. As noted in the Layout section above, the group descriptors (if present) are the second item in the block group. The standard configuration is for each block group to contain a full copy of -the block group descriptor table unless the sparse\_super feature flag +the block group descriptor table unless the sparse_super feature flag is set. Notice how the group descriptor records the location of both bitmaps and the inode table (i.e. they can float). This means that within a block group, the only data structures with fixed locations are the superblock -and the group descriptor table. The flex\_bg mechanism uses this +and the group descriptor table. The flex_bg mechanism uses this property to group several block groups into a flex group and lay out all of the groups' bitmaps and inode tables into one long run in the first group of the flex group. -If the meta\_bg feature flag is set, then several block groups are -grouped together into a meta group. Note that in the meta\_bg case, +If the meta_bg feature flag is set, then several block groups are +grouped together into a meta group. Note that in the meta_bg case, however, the first and last two block groups within the larger meta group contain only group descriptors for the groups inside the meta group. -flex\_bg and meta\_bg do not appear to be mutually exclusive features. +flex_bg and meta_bg do not appear to be mutually exclusive features. In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the block group descriptor was only 32 bytes long and therefore ends at -bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the +bg_checksum. On an ext4 filesystem with the 64bit feature enabled, the block group descriptor expands to at least the 64 bytes described below; the size is stored in the superblock. -If gdt\_csum is set and metadata\_csum is not set, the block group +If gdt_csum is set and metadata_csum is not set, the block group checksum is the crc16 of the FS UUID, the group number, and the group -descriptor structure. If metadata\_csum is set, then the block group +descriptor structure. If metadata_csum is set, then the block group checksum is the lower 16 bits of the checksum of the FS UUID, the group number, and the group descriptor structure. Both block and inode bitmap checksums are calculated against the FS UUID, the group number, and the @@ -51,59 +51,59 @@ The block group descriptor is laid out in ``struct ext4_group_desc``. - Name - Description * - 0x0 - - \_\_le32 - - bg\_block\_bitmap\_lo + - __le32 + - bg_block_bitmap_lo - Lower 32-bits of location of block bitmap. * - 0x4 - - \_\_le32 - - bg\_inode\_bitmap\_lo + - __le32 + - bg_inode_bitmap_lo - Lower 32-bits of location of inode bitmap. * - 0x8 - - \_\_le32 - - bg\_inode\_table\_lo + - __le32 + - bg_inode_table_lo - Lower 32-bits of location of inode table. * - 0xC - - \_\_le16 - - bg\_free\_blocks\_count\_lo + - __le16 + - bg_free_blocks_count_lo - Lower 16-bits of free block count. * - 0xE - - \_\_le16 - - bg\_free\_inodes\_count\_lo + - __le16 + - bg_free_inodes_count_lo - Lower 16-bits of free inode count. * - 0x10 - - \_\_le16 - - bg\_used\_dirs\_count\_lo + - __le16 + - bg_used_dirs_count_lo - Lower 16-bits of directory count. * - 0x12 - - \_\_le16 - - bg\_flags + - __le16 + - bg_flags - Block group flags. See the bgflags_ table below. * - 0x14 - - \_\_le32 - - bg\_exclude\_bitmap\_lo + - __le32 + - bg_exclude_bitmap_lo - Lower 32-bits of location of snapshot exclusion bitmap. * - 0x18 - - \_\_le16 - - bg\_block\_bitmap\_csum\_lo + - __le16 + - bg_block_bitmap_csum_lo - Lower 16-bits of the block bitmap checksum. * - 0x1A - - \_\_le16 - - bg\_inode\_bitmap\_csum\_lo + - __le16 + - bg_inode_bitmap_csum_lo - Lower 16-bits of the inode bitmap checksum. * - 0x1C - - \_\_le16 - - bg\_itable\_unused\_lo + - __le16 + - bg_itable_unused_lo - Lower 16-bits of unused inode count. If set, we needn't scan past the - ``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the + ``(sb.s_inodes_per_group - gdt.bg_itable_unused)`` th entry in the inode table for this group. * - 0x1E - - \_\_le16 - - bg\_checksum - - Group descriptor checksum; crc16(sb\_uuid+group\_num+bg\_desc) if the - RO\_COMPAT\_GDT\_CSUM feature is set, or - crc32c(sb\_uuid+group\_num+bg\_desc) & 0xFFFF if the - RO\_COMPAT\_METADATA\_CSUM feature is set. The bg\_checksum - field in bg\_desc is skipped when calculating crc16 checksum, + - __le16 + - bg_checksum + - Group descriptor checksum; crc16(sb_uuid+group_num+bg_desc) if the + RO_COMPAT_GDT_CSUM feature is set, or + crc32c(sb_uuid+group_num+bg_desc) & 0xFFFF if the + RO_COMPAT_METADATA_CSUM feature is set. The bg_checksum + field in bg_desc is skipped when calculating crc16 checksum, and set to zero if crc32c checksum is used. * - - @@ -111,48 +111,48 @@ The block group descriptor is laid out in ``struct ext4_group_desc``. - These fields only exist if the 64bit feature is enabled and s_desc_size > 32. * - 0x20 - - \_\_le32 - - bg\_block\_bitmap\_hi + - __le32 + - bg_block_bitmap_hi - Upper 32-bits of location of block bitmap. * - 0x24 - - \_\_le32 - - bg\_inode\_bitmap\_hi + - __le32 + - bg_inode_bitmap_hi - Upper 32-bits of location of inodes bitmap. * - 0x28 - - \_\_le32 - - bg\_inode\_table\_hi + - __le32 + - bg_inode_table_hi - Upper 32-bits of location of inodes table. * - 0x2C - - \_\_le16 - - bg\_free\_blocks\_count\_hi + - __le16 + - bg_free_blocks_count_hi - Upper 16-bits of free block count. * - 0x2E - - \_\_le16 - - bg\_free\_inodes\_count\_hi + - __le16 + - bg_free_inodes_count_hi - Upper 16-bits of free inode count. * - 0x30 - - \_\_le16 - - bg\_used\_dirs\_count\_hi + - __le16 + - bg_used_dirs_count_hi - Upper 16-bits of directory count. * - 0x32 - - \_\_le16 - - bg\_itable\_unused\_hi + - __le16 + - bg_itable_unused_hi - Upper 16-bits of unused inode count. * - 0x34 - - \_\_le32 - - bg\_exclude\_bitmap\_hi + - __le32 + - bg_exclude_bitmap_hi - Upper 32-bits of location of snapshot exclusion bitmap. * - 0x38 - - \_\_le16 - - bg\_block\_bitmap\_csum\_hi + - __le16 + - bg_block_bitmap_csum_hi - Upper 16-bits of the block bitmap checksum. * - 0x3A - - \_\_le16 - - bg\_inode\_bitmap\_csum\_hi + - __le16 + - bg_inode_bitmap_csum_hi - Upper 16-bits of the inode bitmap checksum. * - 0x3C - - \_\_u32 - - bg\_reserved + - __u32 + - bg_reserved - Padding to 64 bytes. .. _bgflags: @@ -166,8 +166,8 @@ Block group flags can be any combination of the following: * - Value - Description * - 0x1 - - inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT). + - inode table and bitmap are not initialized (EXT4_BG_INODE_UNINIT). * - 0x2 - - block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT). + - block bitmap is not initialized (EXT4_BG_BLOCK_UNINIT). * - 0x4 - - inode table is zeroed (EXT4\_BG\_INODE\_ZEROED). + - inode table is zeroed (EXT4_BG_INODE_ZEROED). diff --git a/Documentation/filesystems/ext4/ifork.rst b/Documentation/filesystems/ext4/ifork.rst index b9816d5a896b..dc31f505e6c8 100644 --- a/Documentation/filesystems/ext4/ifork.rst +++ b/Documentation/filesystems/ext4/ifork.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 -The Contents of inode.i\_block +The Contents of inode.i_block ------------------------------ Depending on the type of file an inode describes, the 60 bytes of @@ -47,7 +47,7 @@ In ext4, the file to logical block map has been replaced with an extent tree. Under the old scheme, allocating a contiguous run of 1,000 blocks requires an indirect block to map all 1,000 entries; with extents, the mapping is reduced to a single ``struct ext4_extent`` with -``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate +``ee_len = 1000``. If flex_bg is enabled, it is possible to allocate very large files with a single extent, at a considerable reduction in metadata block use, and some improvement in disk efficiency. The inode must have the extents flag (0x80000) flag set for this feature to be in @@ -76,28 +76,28 @@ which is 12 bytes long: - Name - Description * - 0x0 - - \_\_le16 - - eh\_magic + - __le16 + - eh_magic - Magic number, 0xF30A. * - 0x2 - - \_\_le16 - - eh\_entries + - __le16 + - eh_entries - Number of valid entries following the header. * - 0x4 - - \_\_le16 - - eh\_max + - __le16 + - eh_max - Maximum number of entries that could follow the header. * - 0x6 - - \_\_le16 - - eh\_depth + - __le16 + - eh_depth - Depth of this extent node in the extent tree. 0 = this extent node points to data blocks; otherwise, this extent node points to other extent nodes. The extent tree can be at most 5 levels deep: a logical block number can be at most ``2^32``, and the smallest ``n`` that satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5. * - 0x8 - - \_\_le32 - - eh\_generation + - __le32 + - eh_generation - Generation of the tree. (Used by Lustre, but not standard ext4). Internal nodes of the extent tree, also known as index nodes, are @@ -112,22 +112,22 @@ recorded as ``struct ext4_extent_idx``, and are 12 bytes long: - Name - Description * - 0x0 - - \_\_le32 - - ei\_block + - __le32 + - ei_block - This index node covers file blocks from 'block' onward. * - 0x4 - - \_\_le32 - - ei\_leaf\_lo + - __le32 + - ei_leaf_lo - Lower 32-bits of the block number of the extent node that is the next level lower in the tree. The tree node pointed to can be either another internal node or a leaf node, described below. * - 0x8 - - \_\_le16 - - ei\_leaf\_hi + - __le16 + - ei_leaf_hi - Upper 16-bits of the previous field. * - 0xA - - \_\_u16 - - ei\_unused + - __u16 + - ei_unused - Leaf nodes of the extent tree are recorded as ``struct ext4_extent``, @@ -142,24 +142,24 @@ and are also 12 bytes long: - Name - Description * - 0x0 - - \_\_le32 - - ee\_block + - __le32 + - ee_block - First file block number that this extent covers. * - 0x4 - - \_\_le16 - - ee\_len + - __le16 + - ee_len - Number of blocks covered by extent. If the value of this field is <= 32768, the extent is initialized. If the value of the field is > 32768, the extent is uninitialized and the actual extent length is ``ee_len`` - 32768. Therefore, the maximum length of a initialized extent is 32768 blocks, and the maximum length of an uninitialized extent is 32767. * - 0x6 - - \_\_le16 - - ee\_start\_hi + - __le16 + - ee_start_hi - Upper 16-bits of the block number to which this extent points. * - 0x8 - - \_\_le32 - - ee\_start\_lo + - __le32 + - ee_start_lo - Lower 32-bits of the block number to which this extent points. Prior to the introduction of metadata checksums, the extent header + @@ -182,8 +182,8 @@ including) the checksum itself. - Name - Description * - 0x0 - - \_\_le32 - - eb\_checksum + - __le32 + - eb_checksum - Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock) Inline Data diff --git a/Documentation/filesystems/ext4/inlinedata.rst b/Documentation/filesystems/ext4/inlinedata.rst index d1075178ce0b..a728af0d2fd0 100644 --- a/Documentation/filesystems/ext4/inlinedata.rst +++ b/Documentation/filesystems/ext4/inlinedata.rst @@ -11,12 +11,12 @@ file is smaller than 60 bytes, then the data are stored inline in attribute space, then it might be found as an extended attribute “system.data” within the inode body (“ibody EA”). This of course constrains the amount of extended attributes one can attach to an inode. -If the data size increases beyond i\_block + ibody EA, a regular block +If the data size increases beyond i_block + ibody EA, a regular block is allocated and the contents moved to that block. Pending a change to compact the extended attribute key used to store inline data, one ought to be able to store 160 bytes of data in a -256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to +256-byte inode (as of June 2015, when i_extra_isize is 28). Prior to that, the limit was 156 bytes due to inefficient use of inode space. The inline data feature requires the presence of an extended attribute @@ -25,12 +25,12 @@ for “system.data”, even if the attribute value is zero length. Inline Directories ~~~~~~~~~~~~~~~~~~ -The first four bytes of i\_block are the inode number of the parent +The first four bytes of i_block are the inode number of the parent directory. Following that is a 56-byte space for an array of directory entries; see ``struct ext4_dir_entry``. If there is a “system.data” attribute in the inode body, the EA value is an array of ``struct ext4_dir_entry`` as well. Note that for inline directories, the -i\_block and EA space are treated as separate dirent blocks; directory +i_block and EA space are treated as separate dirent blocks; directory entries cannot span the two. Inline directory entries are not checksummed, as the inode checksum diff --git a/Documentation/filesystems/ext4/inodes.rst b/Documentation/filesystems/ext4/inodes.rst index 6c5ce666e63f..cfc6c1659931 100644 --- a/Documentation/filesystems/ext4/inodes.rst +++ b/Documentation/filesystems/ext4/inodes.rst @@ -38,138 +38,138 @@ The inode table entry is laid out in ``struct ext4_inode``. - Name - Description * - 0x0 - - \_\_le16 - - i\_mode + - __le16 + - i_mode - File mode. See the table i_mode_ below. * - 0x2 - - \_\_le16 - - i\_uid + - __le16 + - i_uid - Lower 16-bits of Owner UID. * - 0x4 - - \_\_le32 - - i\_size\_lo + - __le32 + - i_size_lo - Lower 32-bits of size in bytes. * - 0x8 - - \_\_le32 - - i\_atime - - Last access time, in seconds since the epoch. However, if the EA\_INODE + - __le32 + - i_atime + - Last access time, in seconds since the epoch. However, if the EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the checksum of the value. * - 0xC - - \_\_le32 - - i\_ctime + - __le32 + - i_ctime - Last inode change time, in seconds since the epoch. However, if the - EA\_INODE inode flag is set, this inode stores an extended attribute + EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the lower 32 bits of the attribute value's reference count. * - 0x10 - - \_\_le32 - - i\_mtime + - __le32 + - i_mtime - Last data modification time, in seconds since the epoch. However, if the - EA\_INODE inode flag is set, this inode stores an extended attribute + EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the number of the inode that owns the extended attribute. * - 0x14 - - \_\_le32 - - i\_dtime + - __le32 + - i_dtime - Deletion Time, in seconds since the epoch. * - 0x18 - - \_\_le16 - - i\_gid + - __le16 + - i_gid - Lower 16-bits of GID. * - 0x1A - - \_\_le16 - - i\_links\_count + - __le16 + - i_links_count - Hard link count. Normally, ext4 does not permit an inode to have more than 65,000 hard links. This applies to files as well as directories, which means that there cannot be more than 64,998 subdirectories in a directory (each subdirectory's '..' entry counts as a hard link, as does - the '.' entry in the directory itself). With the DIR\_NLINK feature + the '.' entry in the directory itself). With the DIR_NLINK feature enabled, ext4 supports more than 64,998 subdirectories by setting this field to 1 to indicate that the number of hard links is not known. * - 0x1C - - \_\_le32 - - i\_blocks\_lo - - Lower 32-bits of “block” count. If the huge\_file feature flag is not + - __le32 + - i_blocks_lo + - Lower 32-bits of “block” count. If the huge_file feature flag is not set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks - on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in + on disk. If huge_file is set and EXT4_HUGE_FILE_FL is NOT set in ``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi - << 32)`` 512-byte blocks on disk. If huge\_file is set and - EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file + << 32)`` 512-byte blocks on disk. If huge_file is set and + EXT4_HUGE_FILE_FL IS set in ``inode.i_flags``, then this file consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on disk. * - 0x20 - - \_\_le32 - - i\_flags + - __le32 + - i_flags - Inode flags. See the table i_flags_ below. * - 0x24 - 4 bytes - - i\_osd1 + - i_osd1 - See the table i_osd1_ for more details. * - 0x28 - 60 bytes - - i\_block[EXT4\_N\_BLOCKS=15] - - Block map or extent tree. See the section “The Contents of inode.i\_block”. + - i_block[EXT4_N_BLOCKS=15] + - Block map or extent tree. See the section “The Contents of inode.i_block”. * - 0x64 - - \_\_le32 - - i\_generation + - __le32 + - i_generation - File version (for NFS). * - 0x68 - - \_\_le32 - - i\_file\_acl\_lo + - __le32 + - i_file_acl_lo - Lower 32-bits of extended attribute block. ACLs are of course one of many possible extended attributes; I think the name of this field is a result of the first use of extended attributes being for ACLs. * - 0x6C - - \_\_le32 - - i\_size\_high / i\_dir\_acl + - __le32 + - i_size_high / i_dir_acl - Upper 32-bits of file/directory size. In ext2/3 this field was named - i\_dir\_acl, though it was usually set to zero and never used. + i_dir_acl, though it was usually set to zero and never used. * - 0x70 - - \_\_le32 - - i\_obso\_faddr + - __le32 + - i_obso_faddr - (Obsolete) fragment address. * - 0x74 - 12 bytes - - i\_osd2 + - i_osd2 - See the table i_osd2_ for more details. * - 0x80 - - \_\_le16 - - i\_extra\_isize + - __le16 + - i_extra_isize - Size of this inode - 128. Alternately, the size of the extended inode fields beyond the original ext2 inode, including this field. * - 0x82 - - \_\_le16 - - i\_checksum\_hi + - __le16 + - i_checksum_hi - Upper 16-bits of the inode checksum. * - 0x84 - - \_\_le32 - - i\_ctime\_extra + - __le32 + - i_ctime_extra - Extra change time bits. This provides sub-second precision. See Inode Timestamps section. * - 0x88 - - \_\_le32 - - i\_mtime\_extra + - __le32 + - i_mtime_extra - Extra modification time bits. This provides sub-second precision. * - 0x8C - - \_\_le32 - - i\_atime\_extra + - __le32 + - i_atime_extra - Extra access time bits. This provides sub-second precision. * - 0x90 - - \_\_le32 - - i\_crtime + - __le32 + - i_crtime - File creation time, in seconds since the epoch. * - 0x94 - - \_\_le32 - - i\_crtime\_extra + - __le32 + - i_crtime_extra - Extra file creation time bits. This provides sub-second precision. * - 0x98 - - \_\_le32 - - i\_version\_hi + - __le32 + - i_version_hi - Upper 32-bits for version number. * - 0x9C - - \_\_le32 - - i\_projid + - __le32 + - i_projid - Project ID. .. _i_mode: @@ -183,45 +183,45 @@ The ``i_mode`` value is a combination of the following flags: * - Value - Description * - 0x1 - - S\_IXOTH (Others may execute) + - S_IXOTH (Others may execute) * - 0x2 - - S\_IWOTH (Others may write) + - S_IWOTH (Others may write) * - 0x4 - - S\_IROTH (Others may read) + - S_IROTH (Others may read) * - 0x8 - - S\_IXGRP (Group members may execute) + - S_IXGRP (Group members may execute) * - 0x10 - - S\_IWGRP (Group members may write) + - S_IWGRP (Group members may write) * - 0x20 - - S\_IRGRP (Group members may read) + - S_IRGRP (Group members may read) * - 0x40 - - S\_IXUSR (Owner may execute) + - S_IXUSR (Owner may execute) * - 0x80 - - S\_IWUSR (Owner may write) + - S_IWUSR (Owner may write) * - 0x100 - - S\_IRUSR (Owner may read) + - S_IRUSR (Owner may read) * - 0x200 - - S\_ISVTX (Sticky bit) + - S_ISVTX (Sticky bit) * - 0x400 - - S\_ISGID (Set GID) + - S_ISGID (Set GID) * - 0x800 - - S\_ISUID (Set UID) + - S_ISUID (Set UID) * - - These are mutually-exclusive file types: * - 0x1000 - - S\_IFIFO (FIFO) + - S_IFIFO (FIFO) * - 0x2000 - - S\_IFCHR (Character device) + - S_IFCHR (Character device) * - 0x4000 - - S\_IFDIR (Directory) + - S_IFDIR (Directory) * - 0x6000 - - S\_IFBLK (Block device) + - S_IFBLK (Block device) * - 0x8000 - - S\_IFREG (Regular file) + - S_IFREG (Regular file) * - 0xA000 - - S\_IFLNK (Symbolic link) + - S_IFLNK (Symbolic link) * - 0xC000 - - S\_IFSOCK (Socket) + - S_IFSOCK (Socket) .. _i_flags: @@ -234,56 +234,56 @@ The ``i_flags`` field is a combination of these values: * - Value - Description * - 0x1 - - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented) + - This file requires secure deletion (EXT4_SECRM_FL). (not implemented) * - 0x2 - This file should be preserved, should undeletion be desired - (EXT4\_UNRM\_FL). (not implemented) + (EXT4_UNRM_FL). (not implemented) * - 0x4 - - File is compressed (EXT4\_COMPR\_FL). (not really implemented) + - File is compressed (EXT4_COMPR_FL). (not really implemented) * - 0x8 - - All writes to the file must be synchronous (EXT4\_SYNC\_FL). + - All writes to the file must be synchronous (EXT4_SYNC_FL). * - 0x10 - - File is immutable (EXT4\_IMMUTABLE\_FL). + - File is immutable (EXT4_IMMUTABLE_FL). * - 0x20 - - File can only be appended (EXT4\_APPEND\_FL). + - File can only be appended (EXT4_APPEND_FL). * - 0x40 - - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL). + - The dump(1) utility should not dump this file (EXT4_NODUMP_FL). * - 0x80 - - Do not update access time (EXT4\_NOATIME\_FL). + - Do not update access time (EXT4_NOATIME_FL). * - 0x100 - - Dirty compressed file (EXT4\_DIRTY\_FL). (not used) + - Dirty compressed file (EXT4_DIRTY_FL). (not used) * - 0x200 - - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used) + - File has one or more compressed clusters (EXT4_COMPRBLK_FL). (not used) * - 0x400 - - Do not compress file (EXT4\_NOCOMPR\_FL). (not used) + - Do not compress file (EXT4_NOCOMPR_FL). (not used) * - 0x800 - - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was - EXT4\_ECOMPR\_FL (compression error), which was never used. + - Encrypted inode (EXT4_ENCRYPT_FL). This bit value previously was + EXT4_ECOMPR_FL (compression error), which was never used. * - 0x1000 - - Directory has hashed indexes (EXT4\_INDEX\_FL). + - Directory has hashed indexes (EXT4_INDEX_FL). * - 0x2000 - - AFS magic directory (EXT4\_IMAGIC\_FL). + - AFS magic directory (EXT4_IMAGIC_FL). * - 0x4000 - File data must always be written through the journal - (EXT4\_JOURNAL\_DATA\_FL). + (EXT4_JOURNAL_DATA_FL). * - 0x8000 - - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4) + - File tail should not be merged (EXT4_NOTAIL_FL). (not used by ext4) * - 0x10000 - All directory entry data should be written synchronously (see - ``dirsync``) (EXT4\_DIRSYNC\_FL). + ``dirsync``) (EXT4_DIRSYNC_FL). * - 0x20000 - - Top of directory hierarchy (EXT4\_TOPDIR\_FL). + - Top of directory hierarchy (EXT4_TOPDIR_FL). * - 0x40000 - - This is a huge file (EXT4\_HUGE\_FILE\_FL). + - This is a huge file (EXT4_HUGE_FILE_FL). * - 0x80000 - - Inode uses extents (EXT4\_EXTENTS\_FL). + - Inode uses extents (EXT4_EXTENTS_FL). * - 0x100000 - - Verity protected file (EXT4\_VERITY\_FL). + - Verity protected file (EXT4_VERITY_FL). * - 0x200000 - Inode stores a large extended attribute value in its data blocks - (EXT4\_EA\_INODE\_FL). + (EXT4_EA_INODE_FL). * - 0x400000 - - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL). + - This file has blocks allocated past EOF (EXT4_EOFBLOCKS_FL). (deprecated) * - 0x01000000 - Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline) @@ -294,21 +294,21 @@ The ``i_flags`` field is a combination of these values: - Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in mainline) * - 0x10000000 - - Inode has inline data (EXT4\_INLINE\_DATA\_FL). + - Inode has inline data (EXT4_INLINE_DATA_FL). * - 0x20000000 - - Create children with the same project ID (EXT4\_PROJINHERIT\_FL). + - Create children with the same project ID (EXT4_PROJINHERIT_FL). * - 0x80000000 - - Reserved for ext4 library (EXT4\_RESERVED\_FL). + - Reserved for ext4 library (EXT4_RESERVED_FL). * - - Aggregate flags: * - 0x705BDFFF - User-visible flags. * - 0x604BC0FF - - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and - EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's - EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of + - User-modifiable flags. Note that while EXT4_JOURNAL_DATA_FL and + EXT4_EXTENTS_FL can be set with setattr, they are not in the kernel's + EXT4_FL_USER_MODIFIABLE mask, since it needs to handle the setting of these flags in a special manner and they are masked out of the set of - flags that are saved directly to i\_flags. + flags that are saved directly to i_flags. .. _i_osd1: @@ -325,9 +325,9 @@ Linux: - Name - Description * - 0x0 - - \_\_le32 - - l\_i\_version - - Inode version. However, if the EA\_INODE inode flag is set, this inode + - __le32 + - l_i_version + - Inode version. However, if the EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the upper 32 bits of the attribute value's reference count. @@ -342,8 +342,8 @@ Hurd: - Name - Description * - 0x0 - - \_\_le32 - - h\_i\_translator + - __le32 + - h_i_translator - ?? Masix: @@ -357,8 +357,8 @@ Masix: - Name - Description * - 0x0 - - \_\_le32 - - m\_i\_reserved + - __le32 + - m_i_reserved - ?? .. _i_osd2: @@ -376,30 +376,30 @@ Linux: - Name - Description * - 0x0 - - \_\_le16 - - l\_i\_blocks\_high + - __le16 + - l_i_blocks_high - Upper 16-bits of the block count. Please see the note attached to - i\_blocks\_lo. + i_blocks_lo. * - 0x2 - - \_\_le16 - - l\_i\_file\_acl\_high + - __le16 + - l_i_file_acl_high - Upper 16-bits of the extended attribute block (historically, the file ACL location). See the Extended Attributes section below. * - 0x4 - - \_\_le16 - - l\_i\_uid\_high + - __le16 + - l_i_uid_high - Upper 16-bits of the Owner UID. * - 0x6 - - \_\_le16 - - l\_i\_gid\_high + - __le16 + - l_i_gid_high - Upper 16-bits of the GID. * - 0x8 - - \_\_le16 - - l\_i\_checksum\_lo + - __le16 + - l_i_checksum_lo - Lower 16-bits of the inode checksum. * - 0xA - - \_\_le16 - - l\_i\_reserved + - __le16 + - l_i_reserved - Unused. Hurd: @@ -413,24 +413,24 @@ Hurd: - Name - Description * - 0x0 - - \_\_le16 - - h\_i\_reserved1 + - __le16 + - h_i_reserved1 - ?? * - 0x2 - - \_\_u16 - - h\_i\_mode\_high + - __u16 + - h_i_mode_high - Upper 16-bits of the file mode. * - 0x4 - - \_\_le16 - - h\_i\_uid\_high + - __le16 + - h_i_uid_high - Upper 16-bits of the Owner UID. * - 0x6 - - \_\_le16 - - h\_i\_gid\_high + - __le16 + - h_i_gid_high - Upper 16-bits of the GID. * - 0x8 - - \_\_u32 - - h\_i\_author + - __u32 + - h_i_author - Author code? Masix: @@ -444,17 +444,17 @@ Masix: - Name - Description * - 0x0 - - \_\_le16 - - h\_i\_reserved1 + - __le16 + - h_i_reserved1 - ?? * - 0x2 - - \_\_u16 - - m\_i\_file\_acl\_high + - __u16 + - m_i_file_acl_high - Upper 16-bits of the extended attribute block (historically, the file ACL location). * - 0x4 - - \_\_u32 - - m\_i\_reserved2[2] + - __u32 + - m_i_reserved2[2] - ?? Inode Size @@ -466,11 +466,11 @@ In ext2 and ext3, the inode structure size was fixed at 128 bytes on-disk inode at format time for all inodes in the filesystem to provide space beyond the end of the original ext2 inode. The on-disk inode record size is recorded in the superblock as ``s_inode_size``. The -number of bytes actually used by struct ext4\_inode beyond the original +number of bytes actually used by struct ext4_inode beyond the original 128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each -inode, which allows struct ext4\_inode to grow for a new kernel without +inode, which allows struct ext4_inode to grow for a new kernel without having to upgrade all of the on-disk inodes. Access to fields beyond -EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within +EXT2_GOOD_OLD_INODE_SIZE should be verified to be within ``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as of August 2019) the inode structure is 160 bytes (``i_extra_isize = 32``). The extra space between the end of the inode @@ -516,7 +516,7 @@ creation time (crtime); this field is 64-bits wide and decoded in the same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible through the regular stat() interface, though debugfs will report them. -We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)). +We use the 32-bit signed time value plus (2^32 * (extra epoch bits)). In other words: .. list-table:: @@ -525,8 +525,8 @@ In other words: * - Extra epoch bits - MSB of 32-bit time - - Adjustment for signed 32-bit to 64-bit tv\_sec - - Decoded 64-bit tv\_sec + - Adjustment for signed 32-bit to 64-bit tv_sec + - Decoded 64-bit tv_sec - valid time range * - 0 0 - 1 diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index 5fad38860f17..a6bef5293a60 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -63,8 +63,8 @@ Generally speaking, the journal has this format: :header-rows: 1 * - Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - One transaction @@ -93,8 +93,8 @@ superblock. * - 1024 bytes of padding - ext4 Superblock - Journal Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - @@ -117,17 +117,17 @@ Every block in the journal starts with a common 12-byte header - Name - Description * - 0x0 - - \_\_be32 - - h\_magic + - __be32 + - h_magic - jbd2 magic number, 0xC03B3998. * - 0x4 - - \_\_be32 - - h\_blocktype + - __be32 + - h_blocktype - Description of what this block contains. See the jbd2_blocktype_ table below. * - 0x8 - - \_\_be32 - - h\_sequence + - __be32 + - h_sequence - The transaction ID that goes with this block. .. _jbd2_blocktype: @@ -177,99 +177,99 @@ which is 1024 bytes long: - - Static information describing the journal. * - 0x0 - - journal\_header\_t (12 bytes) - - s\_header + - journal_header_t (12 bytes) + - s_header - Common header identifying this as a superblock. * - 0xC - - \_\_be32 - - s\_blocksize + - __be32 + - s_blocksize - Journal device block size. * - 0x10 - - \_\_be32 - - s\_maxlen + - __be32 + - s_maxlen - Total number of blocks in this journal. * - 0x14 - - \_\_be32 - - s\_first + - __be32 + - s_first - First block of log information. * - - - - Dynamic information describing the current state of the log. * - 0x18 - - \_\_be32 - - s\_sequence + - __be32 + - s_sequence - First commit ID expected in log. * - 0x1C - - \_\_be32 - - s\_start + - __be32 + - s_start - Block number of the start of log. Contrary to the comments, this field being zero does not imply that the journal is clean! * - 0x20 - - \_\_be32 - - s\_errno - - Error value, as set by jbd2\_journal\_abort(). + - __be32 + - s_errno + - Error value, as set by jbd2_journal_abort(). * - - - - The remaining fields are only valid in a v2 superblock. * - 0x24 - - \_\_be32 - - s\_feature\_compat; + - __be32 + - s_feature_compat; - Compatible feature set. See the table jbd2_compat_ below. * - 0x28 - - \_\_be32 - - s\_feature\_incompat + - __be32 + - s_feature_incompat - Incompatible feature set. See the table jbd2_incompat_ below. * - 0x2C - - \_\_be32 - - s\_feature\_ro\_compat + - __be32 + - s_feature_ro_compat - Read-only compatible feature set. There aren't any of these currently. * - 0x30 - - \_\_u8 - - s\_uuid[16] + - __u8 + - s_uuid[16] - 128-bit uuid for journal. This is compared against the copy in the ext4 super block at mount time. * - 0x40 - - \_\_be32 - - s\_nr\_users + - __be32 + - s_nr_users - Number of file systems sharing this journal. * - 0x44 - - \_\_be32 - - s\_dynsuper + - __be32 + - s_dynsuper - Location of dynamic super block copy. (Not used?) * - 0x48 - - \_\_be32 - - s\_max\_transaction + - __be32 + - s_max_transaction - Limit of journal blocks per transaction. (Not used?) * - 0x4C - - \_\_be32 - - s\_max\_trans\_data + - __be32 + - s_max_trans_data - Limit of data blocks per transaction. (Not used?) * - 0x50 - - \_\_u8 - - s\_checksum\_type + - __u8 + - s_checksum_type - Checksum algorithm used for the journal. See jbd2_checksum_type_ for more info. * - 0x51 - - \_\_u8[3] - - s\_padding2 + - __u8[3] + - s_padding2 - * - 0x54 - - \_\_be32 - - s\_num\_fc\_blocks + - __be32 + - s_num_fc_blocks - Number of fast commit blocks in the journal. * - 0x58 - - \_\_u32 - - s\_padding[42] + - __u32 + - s_padding[42] - * - 0xFC - - \_\_be32 - - s\_checksum + - __be32 + - s_checksum - Checksum of the entire superblock, with this field set to zero. * - 0x100 - - \_\_u8 - - s\_users[16\*48] + - __u8 + - s_users[16*48] - ids of all file systems sharing the log. e2fsprogs/Linux don't allow shared external journals, but I imagine Lustre (or ocfs2?), which use the jbd2 code, might. @@ -286,7 +286,7 @@ The journal compat features are any combination of the following: - Description * - 0x1 - Journal maintains checksums on the data blocks. - (JBD2\_FEATURE\_COMPAT\_CHECKSUM) + (JBD2_FEATURE_COMPAT_CHECKSUM) .. _jbd2_incompat: @@ -299,23 +299,23 @@ The journal incompat features are any combination of the following: * - Value - Description * - 0x1 - - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE) + - Journal has block revocation records. (JBD2_FEATURE_INCOMPAT_REVOKE) * - 0x2 - Journal can deal with 64-bit block numbers. - (JBD2\_FEATURE\_INCOMPAT\_64BIT) + (JBD2_FEATURE_INCOMPAT_64BIT) * - 0x4 - - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT) + - Journal commits asynchronously. (JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) * - 0x8 - This journal uses v2 of the checksum on-disk format. Each journal metadata block gets its own checksum, and the block tags in the descriptor table contain checksums for each of the data blocks in the - journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2) + journal. (JBD2_FEATURE_INCOMPAT_CSUM_V2) * - 0x10 - This journal uses v3 of the checksum on-disk format. This is the same as v2, but the journal block tag size is fixed regardless of the size of - block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3) + block numbers. (JBD2_FEATURE_INCOMPAT_CSUM_V3) * - 0x20 - - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) + - Journal has fast commit blocks. (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) .. _jbd2_checksum_type: @@ -355,11 +355,11 @@ Descriptor blocks consume at least 36 bytes, but use a full block: - Name - Descriptor * - 0x0 - - journal\_header\_t + - journal_header_t - (open coded) - Common block header. * - 0xC - - struct journal\_block\_tag\_s + - struct journal_block_tag_s - open coded array[] - Enough tags either to fill up the block or to describe all the data blocks that follow this descriptor block. @@ -367,7 +367,7 @@ Descriptor blocks consume at least 36 bytes, but use a full block: Journal block tags have any of the following formats, depending on which journal feature and block tag flags are set. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is set, the journal block tag is defined as ``struct journal_block_tag3_s``, which looks like the following. The size is 16 or 32 bytes. @@ -380,24 +380,24 @@ following. The size is 16 or 32 bytes. - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be32 - - t\_flags + - __be32 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block - should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is + should end up on disk. This is zero if JBD2_FEATURE_INCOMPAT_64BIT is not enabled. * - 0xC - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. * - - @@ -433,7 +433,7 @@ The journal tag flags are any combination of the following: * - 0x8 - This is the last tag in this descriptor block. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is NOT set, the journal block tag is defined as ``struct journal_block_tag_s``, which looks like the following. The size is 8, 12, 24, or 28 bytes: @@ -446,18 +446,18 @@ following. The size is 8, 12, 24, or 28 bytes: - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be16 - - t\_checksum + - __be16 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. Note that only the lower 16 bits are stored. * - 0x6 - - \_\_be16 - - t\_flags + - __be16 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - @@ -466,8 +466,8 @@ following. The size is 8, 12, 24, or 28 bytes: - This next field is only present if the super block indicates support for 64-bit block numbers. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block should end up on disk. * - @@ -483,8 +483,8 @@ following. The size is 8, 12, 24, or 28 bytes: ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that field. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the block is a ``struct jbd2_journal_block_tail``, which looks like this: .. list-table:: @@ -496,8 +496,8 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID + the descriptor block, with this field set to zero. @@ -538,25 +538,25 @@ length, but use a full block: - Name - Description * - 0x0 - - journal\_header\_t - - r\_header + - journal_header_t + - r_header - Common block header. * - 0xC - - \_\_be32 - - r\_count + - __be32 + - r_count - Number of bytes used in this block. * - 0x10 - - \_\_be32 or \_\_be64 + - __be32 or __be64 - blocks[0] - Blocks to revoke. -After r\_count is a linear array of block numbers that are effectively +After r_count is a linear array of block numbers that are effectively revoked by this transaction. The size of each block number is 8 bytes if the superblock advertises 64-bit block number support, or 4 bytes otherwise. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the revocation block is a ``struct jbd2_journal_revoke_tail``, which has this format: .. list-table:: @@ -568,8 +568,8 @@ block is a ``struct jbd2_journal_revoke_tail``, which has this format: - Name - Description * - 0x0 - - \_\_be32 - - r\_checksum + - __be32 + - r_checksum - Checksum of the journal UUID + revocation block Commit Block @@ -592,38 +592,38 @@ bytes long (but uses a full block): - Name - Descriptor * - 0x0 - - journal\_header\_s + - journal_header_s - (open coded) - Common block header. * - 0xC - unsigned char - - h\_chksum\_type + - h_chksum_type - The type of checksum to use to verify the integrity of the data blocks in the transaction. See jbd2_checksum_type_ for more info. * - 0xD - unsigned char - - h\_chksum\_size + - h_chksum_size - The number of bytes used by the checksum. Most likely 4. * - 0xE - unsigned char - - h\_padding[2] + - h_padding[2] - * - 0x10 - - \_\_be32 - - h\_chksum[JBD2\_CHECKSUM\_BYTES] + - __be32 + - h_chksum[JBD2_CHECKSUM_BYTES] - 32 bytes of space to store checksums. If - JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 + JBD2_FEATURE_INCOMPAT_CSUM_V2 or JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the first ``__be32`` is the checksum of the journal UUID and the entire commit block, with this field zeroed. If - JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the + JBD2_FEATURE_COMPAT_CHECKSUM is set, the first ``__be32`` is the crc32 of all the blocks already written to the transaction. * - 0x30 - - \_\_be64 - - h\_commit\_sec + - __be64 + - h_commit_sec - The time that the transaction was committed, in seconds since the epoch. * - 0x38 - - \_\_be32 - - h\_commit\_nsec + - __be32 + - h_commit_nsec - Nanoseconds component of the above timestamp. Fast commits diff --git a/Documentation/filesystems/ext4/mmp.rst b/Documentation/filesystems/ext4/mmp.rst index 25660981d93c..174dd6538737 100644 --- a/Documentation/filesystems/ext4/mmp.rst +++ b/Documentation/filesystems/ext4/mmp.rst @@ -7,8 +7,8 @@ Multiple mount protection (MMP) is a feature that protects the filesystem against multiple hosts trying to use the filesystem simultaneously. When a filesystem is opened (for mounting, or fsck, etc.), the MMP code running on the node (call it node A) checks a -sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the -open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then +sequence number. If the sequence number is EXT4_MMP_SEQ_CLEAN, the +open continues. If the sequence number is EXT4_MMP_SEQ_FSCK, then fsck is (hopefully) running, and open fails immediately. Otherwise, the open code will wait for twice the specified MMP check interval and check the sequence number again. If the sequence number has changed, then the @@ -40,38 +40,38 @@ The MMP structure (``struct mmp_struct``) is as follows: - Name - Description * - 0x0 - - \_\_le32 - - mmp\_magic + - __le32 + - mmp_magic - Magic number for MMP, 0x004D4D50 (“MMP”). * - 0x4 - - \_\_le32 - - mmp\_seq + - __le32 + - mmp_seq - Sequence number, updated periodically. * - 0x8 - - \_\_le64 - - mmp\_time + - __le64 + - mmp_time - Time that the MMP block was last updated. * - 0x10 - char[64] - - mmp\_nodename + - mmp_nodename - Hostname of the node that opened the filesystem. * - 0x50 - char[32] - - mmp\_bdevname + - mmp_bdevname - Block device name of the filesystem. * - 0x70 - - \_\_le16 - - mmp\_check\_interval + - __le16 + - mmp_check_interval - The MMP re-check interval, in seconds. * - 0x72 - - \_\_le16 - - mmp\_pad1 + - __le16 + - mmp_pad1 - Zero. * - 0x74 - - \_\_le32[226] - - mmp\_pad2 + - __le32[226] + - mmp_pad2 - Zero. * - 0x3FC - - \_\_le32 - - mmp\_checksum + - __le32 + - mmp_checksum - Checksum of the MMP block. diff --git a/Documentation/filesystems/ext4/overview.rst b/Documentation/filesystems/ext4/overview.rst index 123ebfde47ee..0fad6eda6e15 100644 --- a/Documentation/filesystems/ext4/overview.rst +++ b/Documentation/filesystems/ext4/overview.rst @@ -7,7 +7,7 @@ An ext4 file system is split into a series of block groups. To reduce performance difficulties due to fragmentation, the block allocator tries very hard to keep each file's blocks within the same group, thereby reducing seek times. The size of a block group is specified in -``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \* +``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 * ``block_size_in_bytes``. With the default block size of 4KiB, each group will contain 32,768 blocks, for a length of 128MiB. The number of block groups is the size of the device divided by the size of a block group. diff --git a/Documentation/filesystems/ext4/special_inodes.rst b/Documentation/filesystems/ext4/special_inodes.rst index 94f304e3a0a7..fc0636901fa0 100644 --- a/Documentation/filesystems/ext4/special_inodes.rst +++ b/Documentation/filesystems/ext4/special_inodes.rst @@ -34,7 +34,7 @@ ext4 reserves some inode for special features, as follows: * - 10 - Replica inode, used for some non-upstream feature? * - 11 - - Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock. + - Traditional first non-reserved inode. Usually this is the lost+found directory. See s_first_ino in the superblock. Note that there are also some inodes allocated from non-reserved inode numbers for other filesystem features which are not referenced from standard directory @@ -47,9 +47,9 @@ hierarchy. These are generally reference from the superblock. They are: * - Superblock field - Description - * - s\_lpf\_ino + * - s_lpf_ino - Inode number of lost+found directory. - * - s\_prj\_quota\_inum + * - s_prj_quota_inum - Inode number of quota file tracking project quotas - * - s\_orphan\_file\_inum + * - s_orphan_file_inum - Inode number of file tracking orphan inodes. diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst index f6a548e957bb..268888522e35 100644 --- a/Documentation/filesystems/ext4/super.rst +++ b/Documentation/filesystems/ext4/super.rst @@ -7,7 +7,7 @@ The superblock records various information about the enclosing filesystem, such as block counts, inode counts, supported features, maintenance information, and more. -If the sparse\_super feature flag is set, redundant copies of the +If the sparse_super feature flag is set, redundant copies of the superblock and group descriptors are kept only in the groups whose group number is either 0 or a power of 3, 5, or 7. If the flag is not set, redundant copies are kept in all groups. @@ -27,107 +27,107 @@ The ext4 superblock is laid out as follows in - Name - Description * - 0x0 - - \_\_le32 - - s\_inodes\_count + - __le32 + - s_inodes_count - Total inode count. * - 0x4 - - \_\_le32 - - s\_blocks\_count\_lo + - __le32 + - s_blocks_count_lo - Total block count. * - 0x8 - - \_\_le32 - - s\_r\_blocks\_count\_lo + - __le32 + - s_r_blocks_count_lo - This number of blocks can only be allocated by the super-user. * - 0xC - - \_\_le32 - - s\_free\_blocks\_count\_lo + - __le32 + - s_free_blocks_count_lo - Free block count. * - 0x10 - - \_\_le32 - - s\_free\_inodes\_count + - __le32 + - s_free_inodes_count - Free inode count. * - 0x14 - - \_\_le32 - - s\_first\_data\_block + - __le32 + - s_first_data_block - First data block. This must be at least 1 for 1k-block filesystems and is typically 0 for all other block sizes. * - 0x18 - - \_\_le32 - - s\_log\_block\_size - - Block size is 2 ^ (10 + s\_log\_block\_size). + - __le32 + - s_log_block_size + - Block size is 2 ^ (10 + s_log_block_size). * - 0x1C - - \_\_le32 - - s\_log\_cluster\_size - - Cluster size is 2 ^ (10 + s\_log\_cluster\_size) blocks if bigalloc is - enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size. + - __le32 + - s_log_cluster_size + - Cluster size is 2 ^ (10 + s_log_cluster_size) blocks if bigalloc is + enabled. Otherwise s_log_cluster_size must equal s_log_block_size. * - 0x20 - - \_\_le32 - - s\_blocks\_per\_group + - __le32 + - s_blocks_per_group - Blocks per group. * - 0x24 - - \_\_le32 - - s\_clusters\_per\_group + - __le32 + - s_clusters_per_group - Clusters per group, if bigalloc is enabled. Otherwise - s\_clusters\_per\_group must equal s\_blocks\_per\_group. + s_clusters_per_group must equal s_blocks_per_group. * - 0x28 - - \_\_le32 - - s\_inodes\_per\_group + - __le32 + - s_inodes_per_group - Inodes per group. * - 0x2C - - \_\_le32 - - s\_mtime + - __le32 + - s_mtime - Mount time, in seconds since the epoch. * - 0x30 - - \_\_le32 - - s\_wtime + - __le32 + - s_wtime - Write time, in seconds since the epoch. * - 0x34 - - \_\_le16 - - s\_mnt\_count + - __le16 + - s_mnt_count - Number of mounts since the last fsck. * - 0x36 - - \_\_le16 - - s\_max\_mnt\_count + - __le16 + - s_max_mnt_count - Number of mounts beyond which a fsck is needed. * - 0x38 - - \_\_le16 - - s\_magic + - __le16 + - s_magic - Magic signature, 0xEF53 * - 0x3A - - \_\_le16 - - s\_state + - __le16 + - s_state - File system state. See super_state_ for more info. * - 0x3C - - \_\_le16 - - s\_errors + - __le16 + - s_errors - Behaviour when detecting errors. See super_errors_ for more info. * - 0x3E - - \_\_le16 - - s\_minor\_rev\_level + - __le16 + - s_minor_rev_level - Minor revision level. * - 0x40 - - \_\_le32 - - s\_lastcheck + - __le32 + - s_lastcheck - Time of last check, in seconds since the epoch. * - 0x44 - - \_\_le32 - - s\_checkinterval + - __le32 + - s_checkinterval - Maximum time between checks, in seconds. * - 0x48 - - \_\_le32 - - s\_creator\_os + - __le32 + - s_creator_os - Creator OS. See the table super_creator_ for more info. * - 0x4C - - \_\_le32 - - s\_rev\_level + - __le32 + - s_rev_level - Revision level. See the table super_revision_ for more info. * - 0x50 - - \_\_le16 - - s\_def\_resuid + - __le16 + - s_def_resuid - Default uid for reserved blocks. * - 0x52 - - \_\_le16 - - s\_def\_resgid + - __le16 + - s_def_resgid - Default gid for reserved blocks. * - - @@ -143,50 +143,50 @@ The ext4 superblock is laid out as follows in about a feature in either the compatible or incompatible feature set, it must abort and not try to meddle with things it doesn't understand... * - 0x54 - - \_\_le32 - - s\_first\_ino + - __le32 + - s_first_ino - First non-reserved inode. * - 0x58 - - \_\_le16 - - s\_inode\_size + - __le16 + - s_inode_size - Size of inode structure, in bytes. * - 0x5A - - \_\_le16 - - s\_block\_group\_nr + - __le16 + - s_block_group_nr - Block group # of this superblock. * - 0x5C - - \_\_le32 - - s\_feature\_compat + - __le32 + - s_feature_compat - Compatible feature set flags. Kernel can still read/write this fs even if it doesn't understand a flag; fsck should not do that. See the super_compat_ table for more info. * - 0x60 - - \_\_le32 - - s\_feature\_incompat + - __le32 + - s_feature_incompat - Incompatible feature set. If the kernel or fsck doesn't understand one of these bits, it should stop. See the super_incompat_ table for more info. * - 0x64 - - \_\_le32 - - s\_feature\_ro\_compat + - __le32 + - s_feature_ro_compat - Readonly-compatible feature set. If the kernel doesn't understand one of these bits, it can still mount read-only. See the super_rocompat_ table for more info. * - 0x68 - - \_\_u8 - - s\_uuid[16] + - __u8 + - s_uuid[16] - 128-bit UUID for volume. * - 0x78 - char - - s\_volume\_name[16] + - s_volume_name[16] - Volume label. * - 0x88 - char - - s\_last\_mounted[64] + - s_last_mounted[64] - Directory where filesystem was last mounted. * - 0xC8 - - \_\_le32 - - s\_algorithm\_usage\_bitmap + - __le32 + - s_algorithm_usage_bitmap - For compression (Not used in e2fsprogs/Linux) * - - @@ -194,18 +194,18 @@ The ext4 superblock is laid out as follows in - Performance hints. Directory preallocation should only happen if the EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on. * - 0xCC - - \_\_u8 - - s\_prealloc\_blocks + - __u8 + - s_prealloc_blocks - #. of blocks to try to preallocate for ... files? (Not used in e2fsprogs/Linux) * - 0xCD - - \_\_u8 - - s\_prealloc\_dir\_blocks + - __u8 + - s_prealloc_dir_blocks - #. of blocks to preallocate for directories. (Not used in e2fsprogs/Linux) * - 0xCE - - \_\_le16 - - s\_reserved\_gdt\_blocks + - __le16 + - s_reserved_gdt_blocks - Number of reserved GDT entries for future filesystem expansion. * - - @@ -213,281 +213,281 @@ The ext4 superblock is laid out as follows in - Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is set. * - 0xD0 - - \_\_u8 - - s\_journal\_uuid[16] + - __u8 + - s_journal_uuid[16] - UUID of journal superblock * - 0xE0 - - \_\_le32 - - s\_journal\_inum + - __le32 + - s_journal_inum - inode number of journal file. * - 0xE4 - - \_\_le32 - - s\_journal\_dev + - __le32 + - s_journal_dev - Device number of journal file, if the external journal feature flag is set. * - 0xE8 - - \_\_le32 - - s\_last\_orphan + - __le32 + - s_last_orphan - Start of list of orphaned inodes to delete. * - 0xEC - - \_\_le32 - - s\_hash\_seed[4] + - __le32 + - s_hash_seed[4] - HTREE hash seed. * - 0xFC - - \_\_u8 - - s\_def\_hash\_version + - __u8 + - s_def_hash_version - Default hash algorithm to use for directory hashes. See super_def_hash_ for more info. * - 0xFD - - \_\_u8 - - s\_jnl\_backup\_type - - If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the + - __u8 + - s_jnl_backup_type + - If this value is 0 or EXT3_JNL_BACKUP_BLOCKS (1), then the ``s_jnl_blocks`` field contains a duplicate copy of the inode's ``i_block[]`` array and ``i_size``. * - 0xFE - - \_\_le16 - - s\_desc\_size + - __le16 + - s_desc_size - Size of group descriptors, in bytes, if the 64bit incompat feature flag is set. * - 0x100 - - \_\_le32 - - s\_default\_mount\_opts + - __le32 + - s_default_mount_opts - Default mount options. See the super_mountopts_ table for more info. * - 0x104 - - \_\_le32 - - s\_first\_meta\_bg - - First metablock block group, if the meta\_bg feature is enabled. + - __le32 + - s_first_meta_bg + - First metablock block group, if the meta_bg feature is enabled. * - 0x108 - - \_\_le32 - - s\_mkfs\_time + - __le32 + - s_mkfs_time - When the filesystem was created, in seconds since the epoch. * - 0x10C - - \_\_le32 - - s\_jnl\_blocks[17] + - __le32 + - s_jnl_blocks[17] - Backup copy of the journal inode's ``i_block[]`` array in the first 15 - elements and i\_size\_high and i\_size in the 16th and 17th elements, + elements and i_size_high and i_size in the 16th and 17th elements, respectively. * - - - - 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set. * - 0x150 - - \_\_le32 - - s\_blocks\_count\_hi + - __le32 + - s_blocks_count_hi - High 32-bits of the block count. * - 0x154 - - \_\_le32 - - s\_r\_blocks\_count\_hi + - __le32 + - s_r_blocks_count_hi - High 32-bits of the reserved block count. * - 0x158 - - \_\_le32 - - s\_free\_blocks\_count\_hi + - __le32 + - s_free_blocks_count_hi - High 32-bits of the free block count. * - 0x15C - - \_\_le16 - - s\_min\_extra\_isize + - __le16 + - s_min_extra_isize - All inodes have at least # bytes. * - 0x15E - - \_\_le16 - - s\_want\_extra\_isize + - __le16 + - s_want_extra_isize - New inodes should reserve # bytes. * - 0x160 - - \_\_le32 - - s\_flags + - __le32 + - s_flags - Miscellaneous flags. See the super_flags_ table for more info. * - 0x164 - - \_\_le16 - - s\_raid\_stride + - __le16 + - s_raid_stride - RAID stride. This is the number of logical blocks read from or written to the disk before moving to the next disk. This affects the placement of filesystem metadata, which will hopefully make RAID storage faster. * - 0x166 - - \_\_le16 - - s\_mmp\_interval + - __le16 + - s_mmp_interval - #. seconds to wait in multi-mount prevention (MMP) checking. In theory, MMP is a mechanism to record in the superblock which host and device have mounted the filesystem, in order to prevent multiple mounts. This feature does not seem to be implemented... * - 0x168 - - \_\_le64 - - s\_mmp\_block + - __le64 + - s_mmp_block - Block # for multi-mount protection data. * - 0x170 - - \_\_le32 - - s\_raid\_stripe\_width + - __le32 + - s_raid_stripe_width - RAID stripe width. This is the number of logical blocks read from or written to the disk before coming back to the current disk. This is used by the block allocator to try to reduce the number of read-modify-write operations in a RAID5/6. * - 0x174 - - \_\_u8 - - s\_log\_groups\_per\_flex + - __u8 + - s_log_groups_per_flex - Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``. * - 0x175 - - \_\_u8 - - s\_checksum\_type + - __u8 + - s_checksum_type - Metadata checksum algorithm type. The only valid value is 1 (crc32c). * - 0x176 - - \_\_le16 - - s\_reserved\_pad + - __le16 + - s_reserved_pad - * - 0x178 - - \_\_le64 - - s\_kbytes\_written + - __le64 + - s_kbytes_written - Number of KiB written to this filesystem over its lifetime. * - 0x180 - - \_\_le32 - - s\_snapshot\_inum + - __le32 + - s_snapshot_inum - inode number of active snapshot. (Not used in e2fsprogs/Linux.) * - 0x184 - - \_\_le32 - - s\_snapshot\_id + - __le32 + - s_snapshot_id - Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.) * - 0x188 - - \_\_le64 - - s\_snapshot\_r\_blocks\_count + - __le64 + - s_snapshot_r_blocks_count - Number of blocks reserved for active snapshot's future use. (Not used in e2fsprogs/Linux.) * - 0x190 - - \_\_le32 - - s\_snapshot\_list + - __le32 + - s_snapshot_list - inode number of the head of the on-disk snapshot list. (Not used in e2fsprogs/Linux.) * - 0x194 - - \_\_le32 - - s\_error\_count + - __le32 + - s_error_count - Number of errors seen. * - 0x198 - - \_\_le32 - - s\_first\_error\_time + - __le32 + - s_first_error_time - First time an error happened, in seconds since the epoch. * - 0x19C - - \_\_le32 - - s\_first\_error\_ino + - __le32 + - s_first_error_ino - inode involved in first error. * - 0x1A0 - - \_\_le64 - - s\_first\_error\_block + - __le64 + - s_first_error_block - Number of block involved of first error. * - 0x1A8 - - \_\_u8 - - s\_first\_error\_func[32] + - __u8 + - s_first_error_func[32] - Name of function where the error happened. * - 0x1C8 - - \_\_le32 - - s\_first\_error\_line + - __le32 + - s_first_error_line - Line number where error happened. * - 0x1CC - - \_\_le32 - - s\_last\_error\_time + - __le32 + - s_last_error_time - Time of most recent error, in seconds since the epoch. * - 0x1D0 - - \_\_le32 - - s\_last\_error\_ino + - __le32 + - s_last_error_ino - inode involved in most recent error. * - 0x1D4 - - \_\_le32 - - s\_last\_error\_line + - __le32 + - s_last_error_line - Line number where most recent error happened. * - 0x1D8 - - \_\_le64 - - s\_last\_error\_block + - __le64 + - s_last_error_block - Number of block involved in most recent error. * - 0x1E0 - - \_\_u8 - - s\_last\_error\_func[32] + - __u8 + - s_last_error_func[32] - Name of function where the most recent error happened. * - 0x200 - - \_\_u8 - - s\_mount\_opts[64] + - __u8 + - s_mount_opts[64] - ASCIIZ string of mount options. * - 0x240 - - \_\_le32 - - s\_usr\_quota\_inum + - __le32 + - s_usr_quota_inum - Inode number of user `quota <quota>`__ file. * - 0x244 - - \_\_le32 - - s\_grp\_quota\_inum + - __le32 + - s_grp_quota_inum - Inode number of group `quota <quota>`__ file. * - 0x248 - - \_\_le32 - - s\_overhead\_blocks + - __le32 + - s_overhead_blocks - Overhead blocks/clusters in fs. (Huh? This field is always zero, which means that the kernel calculates it dynamically.) * - 0x24C - - \_\_le32 - - s\_backup\_bgs[2] - - Block groups containing superblock backups (if sparse\_super2) + - __le32 + - s_backup_bgs[2] + - Block groups containing superblock backups (if sparse_super2) * - 0x254 - - \_\_u8 - - s\_encrypt\_algos[4] + - __u8 + - s_encrypt_algos[4] - Encryption algorithms in use. There can be up to four algorithms in use at any time; valid algorithm codes are given in the super_encrypt_ table below. * - 0x258 - - \_\_u8 - - s\_encrypt\_pw\_salt[16] + - __u8 + - s_encrypt_pw_salt[16] - Salt for the string2key algorithm for encryption. * - 0x268 - - \_\_le32 - - s\_lpf\_ino + - __le32 + - s_lpf_ino - Inode number of lost+found * - 0x26C - - \_\_le32 - - s\_prj\_quota\_inum + - __le32 + - s_prj_quota_inum - Inode that tracks project quotas. * - 0x270 - - \_\_le32 - - s\_checksum\_seed - - Checksum seed used for metadata\_csum calculations. This value is - crc32c(~0, $orig\_fs\_uuid). + - __le32 + - s_checksum_seed + - Checksum seed used for metadata_csum calculations. This value is + crc32c(~0, $orig_fs_uuid). * - 0x274 - - \_\_u8 - - s\_wtime_hi + - __u8 + - s_wtime_hi - Upper 8 bits of the s_wtime field. * - 0x275 - - \_\_u8 - - s\_mtime_hi + - __u8 + - s_mtime_hi - Upper 8 bits of the s_mtime field. * - 0x276 - - \_\_u8 - - s\_mkfs_time_hi + - __u8 + - s_mkfs_time_hi - Upper 8 bits of the s_mkfs_time field. * - 0x277 - - \_\_u8 - - s\_lastcheck_hi + - __u8 + - s_lastcheck_hi - Upper 8 bits of the s_lastcheck_hi field. * - 0x278 - - \_\_u8 - - s\_first_error_time_hi + - __u8 + - s_first_error_time_hi - Upper 8 bits of the s_first_error_time_hi field. * - 0x279 - - \_\_u8 - - s\_last_error_time_hi + - __u8 + - s_last_error_time_hi - Upper 8 bits of the s_last_error_time_hi field. * - 0x27A - - \_\_u8 - - s\_pad[2] + - __u8 + - s_pad[2] - Zero padding. * - 0x27C - - \_\_le16 - - s\_encoding + - __le16 + - s_encoding - Filename charset encoding. * - 0x27E - - \_\_le16 - - s\_encoding_flags + - __le16 + - s_encoding_flags - Filename charset encoding flags. * - 0x280 - - \_\_le32 - - s\_orphan\_file\_inum + - __le32 + - s_orphan_file_inum - Orphan file inode number. * - 0x284 - - \_\_le32 - - s\_reserved[94] + - __le32 + - s_reserved[94] - Padding to the end of the block. * - 0x3FC - - \_\_le32 - - s\_checksum + - __le32 + - s_checksum - Superblock checksum. .. _super_state: @@ -574,44 +574,44 @@ following: * - Value - Description * - 0x1 - - Directory preallocation (COMPAT\_DIR\_PREALLOC). + - Directory preallocation (COMPAT_DIR_PREALLOC). * - 0x2 - “imagic inodes”. Not clear from the code what this does - (COMPAT\_IMAGIC\_INODES). + (COMPAT_IMAGIC_INODES). * - 0x4 - - Has a journal (COMPAT\_HAS\_JOURNAL). + - Has a journal (COMPAT_HAS_JOURNAL). * - 0x8 - - Supports extended attributes (COMPAT\_EXT\_ATTR). + - Supports extended attributes (COMPAT_EXT_ATTR). * - 0x10 - Has reserved GDT blocks for filesystem expansion - (COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER. + (COMPAT_RESIZE_INODE). Requires RO_COMPAT_SPARSE_SUPER. * - 0x20 - - Has directory indices (COMPAT\_DIR\_INDEX). + - Has directory indices (COMPAT_DIR_INDEX). * - 0x40 - “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized - block groups? (COMPAT\_LAZY\_BG) + block groups? (COMPAT_LAZY_BG) * - 0x80 - - “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE). + - “Exclude inode”. Not used. (COMPAT_EXCLUDE_INODE). * - 0x100 - “Exclude bitmap”. Seems to be used to indicate the presence of snapshot-related exclude bitmaps? Not defined in kernel or used in - e2fsprogs (COMPAT\_EXCLUDE\_BITMAP). + e2fsprogs (COMPAT_EXCLUDE_BITMAP). * - 0x200 - - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs + - Sparse Super Block, v2. If this flag is set, the SB field s_backup_bgs points to the two block groups that contain backup superblocks - (COMPAT\_SPARSE\_SUPER2). + (COMPAT_SPARSE_SUPER2). * - 0x400 - Fast commits supported. Although fast commits blocks are backward incompatible, fast commit blocks are not always present in the journal. If fast commit blocks are present in the journal, JBD2 incompat feature - (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets - set (COMPAT\_FAST\_COMMIT). + (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) gets + set (COMPAT_FAST_COMMIT). * - 0x1000 - Orphan file allocated. This is the special file for more efficient tracking of unlinked but still open inodes. When there may be any entries in the file, we additionally set proper rocompat feature - (RO\_COMPAT\_ORPHAN\_PRESENT). + (RO_COMPAT_ORPHAN_PRESENT). .. _super_incompat: @@ -625,45 +625,45 @@ following: * - Value - Description * - 0x1 - - Compression (INCOMPAT\_COMPRESSION). + - Compression (INCOMPAT_COMPRESSION). * - 0x2 - - Directory entries record the file type. See ext4\_dir\_entry\_2 below - (INCOMPAT\_FILETYPE). + - Directory entries record the file type. See ext4_dir_entry_2 below + (INCOMPAT_FILETYPE). * - 0x4 - - Filesystem needs recovery (INCOMPAT\_RECOVER). + - Filesystem needs recovery (INCOMPAT_RECOVER). * - 0x8 - - Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV). + - Filesystem has a separate journal device (INCOMPAT_JOURNAL_DEV). * - 0x10 - Meta block groups. See the earlier discussion of this feature - (INCOMPAT\_META\_BG). + (INCOMPAT_META_BG). * - 0x40 - - Files in this filesystem use extents (INCOMPAT\_EXTENTS). + - Files in this filesystem use extents (INCOMPAT_EXTENTS). * - 0x80 - - Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT). + - Enable a filesystem size of 2^64 blocks (INCOMPAT_64BIT). * - 0x100 - - Multiple mount protection (INCOMPAT\_MMP). + - Multiple mount protection (INCOMPAT_MMP). * - 0x200 - Flexible block groups. See the earlier discussion of this feature - (INCOMPAT\_FLEX\_BG). + (INCOMPAT_FLEX_BG). * - 0x400 - Inodes can be used to store large extended attribute values - (INCOMPAT\_EA\_INODE). + (INCOMPAT_EA_INODE). * - 0x1000 - - Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?) + - Data in directory entry (INCOMPAT_DIRDATA). (Not implemented?) * - 0x2000 - Metadata checksum seed is stored in the superblock. This feature enables - the administrator to change the UUID of a metadata\_csum filesystem + the administrator to change the UUID of a metadata_csum filesystem while the filesystem is mounted; without it, the checksum definition - requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED). + requires all metadata blocks to be rewritten (INCOMPAT_CSUM_SEED). * - 0x4000 - - Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to + - Large directory >2GB or 3-level htree (INCOMPAT_LARGEDIR). Prior to this feature, directories could not be larger than 4GiB and could not have an htree more than 2 levels deep. If this feature is enabled, directories can be larger than 4GiB and have a maximum htree depth of 3. * - 0x8000 - - Data in inode (INCOMPAT\_INLINE\_DATA). + - Data in inode (INCOMPAT_INLINE_DATA). * - 0x10000 - - Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT). + - Encrypted inodes are present on the filesystem. (INCOMPAT_ENCRYPT). .. _super_rocompat: @@ -678,54 +678,54 @@ the following: - Description * - 0x1 - Sparse superblocks. See the earlier discussion of this feature - (RO\_COMPAT\_SPARSE\_SUPER). + (RO_COMPAT_SPARSE_SUPER). * - 0x2 - This filesystem has been used to store a file greater than 2GiB - (RO\_COMPAT\_LARGE\_FILE). + (RO_COMPAT_LARGE_FILE). * - 0x4 - - Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR). + - Not used in kernel or e2fsprogs (RO_COMPAT_BTREE_DIR). * - 0x8 - This filesystem has files whose sizes are represented in units of logical blocks, not 512-byte sectors. This implies a very large file - indeed! (RO\_COMPAT\_HUGE\_FILE) + indeed! (RO_COMPAT_HUGE_FILE) * - 0x10 - Group descriptors have checksums. In addition to detecting corruption, this is useful for lazy formatting with uninitialized groups - (RO\_COMPAT\_GDT\_CSUM). + (RO_COMPAT_GDT_CSUM). * - 0x20 - Indicates that the old ext3 32,000 subdirectory limit no longer applies - (RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1 + (RO_COMPAT_DIR_NLINK). A directory's i_links_count will be set to 1 if it is incremented past 64,999. * - 0x40 - Indicates that large inodes exist on this filesystem - (RO\_COMPAT\_EXTRA\_ISIZE). + (RO_COMPAT_EXTRA_ISIZE). * - 0x80 - - This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT). + - This filesystem has a snapshot (RO_COMPAT_HAS_SNAPSHOT). * - 0x100 - - `Quota <Quota>`__ (RO\_COMPAT\_QUOTA). + - `Quota <Quota>`__ (RO_COMPAT_QUOTA). * - 0x200 - This filesystem supports “bigalloc”, which means that file extents are tracked in units of clusters (of blocks) instead of blocks - (RO\_COMPAT\_BIGALLOC). + (RO_COMPAT_BIGALLOC). * - 0x400 - This filesystem supports metadata checksumming. - (RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though - GDT\_CSUM must not be set) + (RO_COMPAT_METADATA_CSUM; implies RO_COMPAT_GDT_CSUM, though + GDT_CSUM must not be set) * - 0x800 - Filesystem supports replicas. This feature is neither in the kernel nor - e2fsprogs. (RO\_COMPAT\_REPLICA) + e2fsprogs. (RO_COMPAT_REPLICA) * - 0x1000 - Read-only filesystem image; the kernel will not mount this image read-write and most tools will refuse to write to the image. - (RO\_COMPAT\_READONLY) + (RO_COMPAT_READONLY) * - 0x2000 - - Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT) + - Filesystem tracks project quotas. (RO_COMPAT_PROJECT) * - 0x8000 - - Verity inodes may be present on the filesystem. (RO\_COMPAT\_VERITY) + - Verity inodes may be present on the filesystem. (RO_COMPAT_VERITY) * - 0x10000 - Indicates orphan file may have valid orphan entries and thus we need to clean them up when mounting the filesystem - (RO\_COMPAT\_ORPHAN\_PRESENT). + (RO_COMPAT_ORPHAN_PRESENT). .. _super_def_hash: @@ -761,36 +761,36 @@ The ``s_default_mount_opts`` field is any combination of the following: * - Value - Description * - 0x0001 - - Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG) + - Print debugging info upon (re)mount. (EXT4_DEFM_DEBUG) * - 0x0002 - New files take the gid of the containing directory (instead of the fsgid - of the current process). (EXT4\_DEFM\_BSDGROUPS) + of the current process). (EXT4_DEFM_BSDGROUPS) * - 0x0004 - - Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER) + - Support userspace-provided extended attributes. (EXT4_DEFM_XATTR_USER) * - 0x0008 - - Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL) + - Support POSIX access control lists (ACLs). (EXT4_DEFM_ACL) * - 0x0010 - - Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16) + - Do not support 32-bit UIDs. (EXT4_DEFM_UID16) * - 0x0020 - All data and metadata are commited to the journal. - (EXT4\_DEFM\_JMODE\_DATA) + (EXT4_DEFM_JMODE_DATA) * - 0x0040 - All data are flushed to the disk before metadata are committed to the - journal. (EXT4\_DEFM\_JMODE\_ORDERED) + journal. (EXT4_DEFM_JMODE_ORDERED) * - 0x0060 - Data ordering is not preserved; data may be written after the metadata - has been written. (EXT4\_DEFM\_JMODE\_WBACK) + has been written. (EXT4_DEFM_JMODE_WBACK) * - 0x0100 - - Disable write flushes. (EXT4\_DEFM\_NOBARRIER) + - Disable write flushes. (EXT4_DEFM_NOBARRIER) * - 0x0200 - Track which blocks in a filesystem are metadata and therefore should not be used as data blocks. This option will be enabled by default on 3.18, - hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY) + hopefully. (EXT4_DEFM_BLOCK_VALIDITY) * - 0x0400 - Enable DISCARD support, where the storage device is told about blocks - becoming unused. (EXT4\_DEFM\_DISCARD) + becoming unused. (EXT4_DEFM_DISCARD) * - 0x0800 - - Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC) + - Disable delayed allocation. (EXT4_DEFM_NODELALLOC) .. _super_flags: @@ -820,12 +820,12 @@ The ``s_encrypt_algos`` list can contain any of the following: * - Value - Description * - 0 - - Invalid algorithm (ENCRYPTION\_MODE\_INVALID). + - Invalid algorithm (ENCRYPTION_MODE_INVALID). * - 1 - - 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS). + - 256-bit AES in XTS mode (ENCRYPTION_MODE_AES_256_XTS). * - 2 - - 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM). + - 256-bit AES in GCM mode (ENCRYPTION_MODE_AES_256_GCM). * - 3 - - 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC). + - 256-bit AES in CBC mode (ENCRYPTION_MODE_AES_256_CBC). Total size of the superblock is 1024 bytes. diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index a80a59941d2f..4d19b19bcc08 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -37,30 +37,31 @@ The network filesystem helper library needs a place to store a bit of state for its use on each netfs inode it is helping to manage. To this end, a context structure is defined:: - struct netfs_i_context { + struct netfs_inode { + struct inode inode; const struct netfs_request_ops *ops; - struct fscache_cookie *cache; + struct fscache_cookie *cache; }; -A network filesystem that wants to use netfs lib must place one of these -directly after the VFS ``struct inode`` it allocates, usually as part of its -own struct. This can be done in a way similar to the following:: +A network filesystem that wants to use netfs lib must place one of these in its +inode wrapper struct instead of the VFS ``struct inode``. This can be done in +a way similar to the following:: struct my_inode { - struct { - /* These must be contiguous */ - struct inode vfs_inode; - struct netfs_i_context netfs_ctx; - }; + struct netfs_inode netfs; /* Netfslib context and vfs inode */ ... }; -This allows netfslib to find its state by simple offset from the inode pointer, -thereby allowing the netfslib helper functions to be pointed to directly by the -VFS/VM operation tables. +This allows netfslib to find its state by using ``container_of()`` from the +inode pointer, thereby allowing the netfslib helper functions to be pointed to +directly by the VFS/VM operation tables. The structure contains the following fields: + * ``inode`` + + The VFS inode structure. + * ``ops`` The set of operations provided by the network filesystem to netfslib. @@ -78,19 +79,17 @@ To help deal with the per-inode context, a number helper functions are provided. Firstly, a function to perform basic initialisation on a context and set the operations table pointer:: - void netfs_i_context_init(struct inode *inode, - const struct netfs_request_ops *ops); + void netfs_inode_init(struct netfs_inode *ctx, + const struct netfs_request_ops *ops); -then two functions to cast between the VFS inode structure and the netfs -context:: +then a function to cast from the VFS inode structure to the netfs context:: - struct netfs_i_context *netfs_i_context(struct inode *inode); - struct inode *netfs_inode(struct netfs_i_context *ctx); + struct netfs_inode *netfs_node(struct inode *inode); and finally, a function to get the cache cookie pointer from the context attached to an inode (or NULL if fscache is disabled):: - struct fscache_cookie *netfs_i_cookie(struct inode *inode); + struct fscache_cookie *netfs_i_cookie(struct netfs_inode *ctx); Buffered Read Helpers @@ -137,8 +136,9 @@ Three read helpers are provided:: void netfs_readahead(struct readahead_control *ractl); int netfs_read_folio(struct file *file, - struct folio *folio); - int netfs_write_begin(struct file *file, + struct folio *folio); + int netfs_write_begin(struct netfs_inode *ctx, + struct file *file, struct address_space *mapping, loff_t pos, unsigned int len, @@ -158,9 +158,10 @@ The helpers manage the read request, calling back into the network filesystem through the suppplied table of operations. Waits will be performed as necessary before returning for helpers that are meant to be synchronous. -If an error occurs and netfs_priv is non-NULL, ops->cleanup() will be called to -deal with it. If some parts of the request are in progress when an error -occurs, the request will get partially completed if sufficient data is read. +If an error occurs, the ->free_request() will be called to clean up the +netfs_io_request struct allocated. If some parts of the request are in +progress when an error occurs, the request will get partially completed if +sufficient data is read. Additionally, there is:: @@ -208,8 +209,7 @@ The above fields are the ones the netfs can use. They are: * ``netfs_priv`` The network filesystem's private data. The value for this can be passed in - to the helper functions or set during the request. The ->cleanup() op will - be called if this is non-NULL at the end. + to the helper functions or set during the request. * ``start`` * ``len`` @@ -294,6 +294,7 @@ through which it can issue requests and negotiate:: struct netfs_request_ops { void (*init_request)(struct netfs_io_request *rreq, struct file *file); + void (*free_request)(struct netfs_io_request *rreq); int (*begin_cache_operation)(struct netfs_io_request *rreq); void (*expand_readahead)(struct netfs_io_request *rreq); bool (*clamp_length)(struct netfs_io_subrequest *subreq); @@ -302,7 +303,6 @@ through which it can issue requests and negotiate:: int (*check_write_begin)(struct file *file, loff_t pos, unsigned len, struct folio *folio, void **_fsdata); void (*done)(struct netfs_io_request *rreq); - void (*cleanup)(struct address_space *mapping, void *netfs_priv); }; The operations are as follows: @@ -310,7 +310,12 @@ The operations are as follows: * ``init_request()`` [Optional] This is called to initialise the request structure. It is given - the file for reference and can modify the ->netfs_priv value. + the file for reference. + + * ``free_request()`` + + [Optional] This is called as the request is being deallocated so that the + filesystem can clean up any state it has attached there. * ``begin_cache_operation()`` @@ -384,11 +389,6 @@ The operations are as follows: [Optional] This is called after the folios in the request have all been unlocked (and marked uptodate if applicable). - * ``cleanup`` - - [Optional] This is called as the request is being deallocated so that the - filesystem can clean up ->netfs_priv. - Read Helper Procedure diff --git a/Documentation/index.rst b/Documentation/index.rst index 8f9be0e658b4..67036a05b771 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -137,7 +137,6 @@ needed). scheduler/index mhi/index peci/index - hte/index Architecture-agnostic documentation ----------------------------------- diff --git a/Documentation/loongarch/introduction.rst b/Documentation/loongarch/introduction.rst index 2bf40ad370df..216b3f390e80 100644 --- a/Documentation/loongarch/introduction.rst +++ b/Documentation/loongarch/introduction.rst @@ -45,10 +45,12 @@ Name Alias Usage Preserved ``$r23``-``$r31`` ``$s0``-``$s8`` Static registers Yes ================= =============== =================== ============ -Note: The register ``$r21`` is reserved in the ELF psABI, but used by the Linux -kernel for storing the percpu base address. It normally has no ABI name, but is -called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` in some old code, -however they are deprecated aliases of ``$a0`` and ``$a1`` respectively. +.. Note:: + The register ``$r21`` is reserved in the ELF psABI, but used by the Linux + kernel for storing the percpu base address. It normally has no ABI name, + but is called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` + in some old code,however they are deprecated aliases of ``$a0`` and ``$a1`` + respectively. FPRs ---- @@ -69,8 +71,9 @@ Name Alias Usage Preserved ``$f24``-``$f31`` ``$fs0``-``$fs7`` Static registers Yes ================= ================== =================== ============ -Note: You may see ``$fv0`` or ``$fv1`` in some old code, however they are deprecated -aliases of ``$fa0`` and ``$fa1`` respectively. +.. Note:: + You may see ``$fv0`` or ``$fv1`` in some old code, however they are + deprecated aliases of ``$fa0`` and ``$fa1`` respectively. VRs ---- diff --git a/Documentation/loongarch/irq-chip-model.rst b/Documentation/loongarch/irq-chip-model.rst index 8d88f7ab2e5e..7988f4192363 100644 --- a/Documentation/loongarch/irq-chip-model.rst +++ b/Documentation/loongarch/irq-chip-model.rst @@ -145,12 +145,16 @@ Documentation of Loongson's LS7A chipset: https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (in English) -Note: CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described -in Section 7.4 of "LoongArch Reference Manual, Vol 1"; LIOINTC is "Legacy I/O -Interrupts" described in Section 11.1 of "Loongson 3A5000 Processor Reference -Manual"; EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of -"Loongson 3A5000 Processor Reference Manual"; HTVECINTC is "HyperTransport -Interrupts" described in Section 14.3 of "Loongson 3A5000 Processor Reference -Manual"; PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of -"Loongson 7A1000 Bridge User Manual"; PCH-LPC is "LPC Interrupts" described in -Section 24.3 of "Loongson 7A1000 Bridge User Manual". +.. Note:: + - CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described + in Section 7.4 of "LoongArch Reference Manual, Vol 1"; + - LIOINTC is "Legacy I/OInterrupts" described in Section 11.1 of + "Loongson 3A5000 Processor Reference Manual"; + - EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of + "Loongson 3A5000 Processor Reference Manual"; + - HTVECINTC is "HyperTransport Interrupts" described in Section 14.3 of + "Loongson 3A5000 Processor Reference Manual"; + - PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of + "Loongson 7A1000 Bridge User Manual"; + - PCH-LPC is "LPC Interrupts" described in Section 24.3 of + "Loongson 7A1000 Bridge User Manual". diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 04216564a03c..9f41961d11d5 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -2925,6 +2925,43 @@ plpmtud_probe_interval - INTEGER Default: 0 +reconf_enable - BOOLEAN + Enable or disable extension of Stream Reconfiguration functionality + specified in RFC6525. This extension provides the ability to "reset" + a stream, and it includes the Parameters of "Outgoing/Incoming SSN + Reset", "SSN/TSN Reset" and "Add Outgoing/Incoming Streams". + + - 1: Enable extension. + - 0: Disable extension. + + Default: 0 + +intl_enable - BOOLEAN + Enable or disable extension of User Message Interleaving functionality + specified in RFC8260. This extension allows the interleaving of user + messages sent on different streams. With this feature enabled, I-DATA + chunk will replace DATA chunk to carry user messages if also supported + by the peer. Note that to use this feature, one needs to set this option + to 1 and also needs to set socket options SCTP_FRAGMENT_INTERLEAVE to 2 + and SCTP_INTERLEAVING_SUPPORTED to 1. + + - 1: Enable extension. + - 0: Disable extension. + + Default: 0 + +ecn_enable - BOOLEAN + Control use of Explicit Congestion Notification (ECN) by SCTP. + Like in TCP, ECN is used only when both ends of the SCTP connection + indicate support for it. This feature is useful in avoiding losses + due to congestion by allowing supporting routers to signal congestion + before having to drop packets. + + 1: Enable ecn. + 0: Disable ecn. + + Default: 1 + ``/proc/sys/net/core/*`` ======================== diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index d43da709bf40..704f31da5167 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -104,7 +104,7 @@ Whenever possible, use the PHY side RGMII delay for these reasons: * PHY device drivers in PHYLIB being reusable by nature, being able to configure correctly a specified delay enables more designs with similar delay - requirements to be operate correctly + requirements to be operated correctly For cases where the PHY is not capable of providing this delay, but the Ethernet MAC driver is capable of doing so, the correct phy_interface_t value diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 34415ae1af1b..19c286c23786 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -32,6 +32,7 @@ you probably needn't concern yourself with pcmciautils. GNU C 5.1 gcc --version Clang/LLVM (optional) 11.0.0 clang --version GNU make 3.81 make --version +bash 4.2 bash --version binutils 2.23 ld -v flex 2.5.35 flex --version bison 2.0 bison --version @@ -84,6 +85,12 @@ Make You will need GNU make 3.81 or later to build the kernel. +Bash +---- + +Some bash scripts are used for the kernel build. +Bash 4.2 or newer is needed. + Binutils -------- @@ -362,6 +369,11 @@ Make - <ftp://ftp.gnu.org/gnu/make/> +Bash +---- + +- <ftp://ftp.gnu.org/gnu/bash/> + Binutils -------- diff --git a/Documentation/translations/zh_CN/loongarch/introduction.rst b/Documentation/translations/zh_CN/loongarch/introduction.rst index e31a1a928c48..11686ee0caeb 100644 --- a/Documentation/translations/zh_CN/loongarch/introduction.rst +++ b/Documentation/translations/zh_CN/loongarch/introduction.rst @@ -46,10 +46,11 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0，而其 ``$r23``-``$r31`` ``$s0``-``$s8`` 静态寄存器 是 ================= =============== =================== ========== -注意：``$r21``寄存器在ELF psABI中保留未使用，但是在Linux内核用于保存每CPU -变量基地址。该寄存器没有ABI命名，不过在内核中称为``$u0``。在一些遗留代码 -中有时可能见到``$v0``和``$v1``，它们是``$a0``和``$a1``的别名，属于已经废弃 -的用法。 +.. note:: + 注意： ``$r21`` 寄存器在ELF psABI中保留未使用，但是在Linux内核用于保 + 存每CPU变量基地址。该寄存器没有ABI命名，不过在内核中称为 ``$u0`` 。在 + 一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 ``$a0`` 和 + ``$a1`` 的别名，属于已经废弃的用法。 浮点寄存器 ---------- @@ -68,8 +69,9 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0，而其 ``$f24``-``$f31`` ``$fs0``-``$fs7`` 静态寄存器 是 ================= ================== =================== ========== -注意：在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 ``$a0`` -和 ``$a1`` 的别名，属于已经废弃的用法。 +.. note:: + 注意：在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 + ``$a0`` 和 ``$a1`` 的别名，属于已经废弃的用法。 向量寄存器 diff --git a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst index 2a4c3ad38be4..fb5d23b49ed5 100644 --- a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst +++ b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst @@ -147,9 +147,11 @@ PCH-LPC:: https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (英文版) -注：CPUINTC即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其中断 -控制逻辑；LIOINTC即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”；EIOINTC -即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”；HTVECINTC即《龙芯3A5000 -处理器使用手册》第14.3节所描述的“HyperTransport中断”；PCH-PIC/PCH-MSI即《龙芯7A1000桥 -片用户手册》第5章所描述的“中断控制器”；PCH-LPC即《龙芯7A1000桥片用户手册》第24.3节所 -描述的“LPC中断”。 +.. note:: + - CPUINTC：即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其 + 中断控制逻辑； + - LIOINTC：即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”； + - EIOINTC：即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”； + - HTVECINTC：即《龙芯3A5000处理器使用手册》第14.3节所描述的“HyperTransport中断”； + - PCH-PIC/PCH-MSI：即《龙芯7A1000桥片用户手册》第5章所描述的“中断控制器”； + - PCH-LPC：即《龙芯7A1000桥片用户手册》第24.3节所描述的“LPC中断”。 diff --git a/Documentation/usb/usbmon.rst b/Documentation/usb/usbmon.rst index b0bd51080799..6d5ec1e62d09 100644 --- a/Documentation/usb/usbmon.rst +++ b/Documentation/usb/usbmon.rst @@ -42,7 +42,7 @@ if usbmon is built into the kernel:: # modprobe usbmon # -Verify that bus sockets are present: +Verify that bus sockets are present:: # ls /sys/kernel/debug/usb/usbmon 0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u |