diff options
Diffstat (limited to 'Documentation')
47 files changed, 582 insertions, 210 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing index b363827da437..910df0e5815a 100644 --- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing +++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing @@ -1,4 +1,4 @@ -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> @@ -9,7 +9,7 @@ Description: Selects the RX source of the UARTx device. depends on the selected file. e.g. - cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 + cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1 [io1] io2 io3 io4 uart2 uart3 uart4 io6 In this case, UART1 gets its input from IO1 (physical serial port 1). @@ -17,7 +17,7 @@ Description: Selects the RX source of the UARTx device. Users: OpenBMC. Proposed changes should be mailed to openbmc@lists.ozlabs.org -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/io\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> diff --git a/Documentation/accounting/psi.rst b/Documentation/accounting/psi.rst index f2b3439edcc2..860fe651d645 100644 --- a/Documentation/accounting/psi.rst +++ b/Documentation/accounting/psi.rst @@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger for the same psi metric can be specified. However for each trigger a separate file descriptor is required to be able to poll it separately from others, therefore for each trigger a separate open() syscall should be made even -when opening the same psi interface file. +when opening the same psi interface file. Write operations to a file descriptor +with an already existing psi trigger will fail with EBUSY. Monitors activate only when system enters stall state for the monitored psi metric and deactivates upon exit from the stall state. While system is diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst index 7db367572f30..f6861ca16ffe 100644 --- a/Documentation/admin-guide/gpio/index.rst +++ b/Documentation/admin-guide/gpio/index.rst @@ -10,6 +10,7 @@ gpio gpio-aggregator sysfs gpio-mockup + gpio-sim .. only:: subproject and html diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst index 9485a5a2e2e9..2f41caa0096c 100644 --- a/Documentation/arm/marvell.rst +++ b/Documentation/arm/marvell.rst @@ -266,10 +266,12 @@ Avanta family ------------- Flavors: + - 88F6500 - 88F6510 - 88F6530P - 88F6550 - 88F6560 + - 88F6601 Homepage: https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/ diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 5342e895fb60..ea281dd75517 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -52,6 +52,12 @@ stable kernels. | Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2064142 | ARM64_ERRATUM_2064142 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2038923 | ARM64_ERRATUM_2038923 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #1902691 | ARM64_ERRATUM_1902691 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | @@ -92,12 +98,20 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2051678 | ARM64_ERRATUM_2051678 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2224489 | ARM64_ERRATUM_2224489 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X2 | #2119858 | ARM64_ERRATUM_2119858 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X2 | #2224489 | ARM64_ERRATUM_2224489 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1188873,1418040| ARM64_ERRATUM_1418040 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1349291 | N/A | diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index dcefee707ccd..a833ecf12fbc 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code paths in the kernel. Tests are intended to be run after building, installing and booting a kernel. +Kselftest from mainline can be run on older stable kernels. Running tests +from mainline offers the best coverage. Several test rings run mainline +kselftest suite on stable releases. The reason is that when a new test +gets added to test existing code to regression test a bug, we should be +able to run that test on an older kernel. Hence, it is important to keep +code that can still test an older kernel and make sure it skips the test +gracefully on newer releases. + You can find additional information on Kselftest framework, how to write new tests using the framework on Kselftest wiki: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 76af931a332c..1c83e7d60a8a 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -242,7 +242,7 @@ example: int rectangle_area(struct shape *this) { - struct rectangle *self = container_of(this, struct shape, parent); + struct rectangle *self = container_of(this, struct rectangle, parent); return self->length * self->width; }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index fd0061712443..a87ec15e28d2 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -86,6 +86,7 @@ This binding uses the common clock binding[1]. Required properties: - compatible: Should be one of: + "fsl,imx8dxl-clk" "fsl,imx8qm-clk" "fsl,imx8qxp-clk" followed by "fsl,scu-clk" diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index e77635c5422c..fa8b31660cad 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -119,6 +119,9 @@ Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" +- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" + - OMAP3 Tobi with Overo : Commercial expansion board with daughter board compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml index 228c9313df53..f0f9392470a6 100644 --- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -61,16 +61,4 @@ examples: #clock-cells = <1>; }; - # Example UART controller node that consumes clock generated by the clock controller: - - | - uart0: serial@58018000 { - compatible = "snps,dw-apb-uart"; - reg = <0x58018000 0x2000>; - clocks = <&clk 45>, <&clk 46>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <0 9 4>; - reg-shift = <2>; - reg-io-width = <4>; - }; - ... diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml new file mode 100644 index 000000000000..0abd6ba82dfd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +description: | + The CS2000-CP is an extremely versatile system clocking device that + utilizes a programmable phase lock loop. + + Link: https://www.cirrus.com/products/cs2000/ + +properties: + compatible: + enum: + - cirrus,cs2000-cp + + clocks: + description: + Common clock binding for CLK_IN, XTI/REF_CLK + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: clk_in + - const: ref_clk + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + + cirrus,aux-output-source: + description: + Specifies the function of the auxiliary clock output pin + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # CS2000CP_AUX_OUTPUT_REF_CLK: ref_clk input + - 1 # CS2000CP_AUX_OUTPUT_CLK_IN: clk_in input + - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT: clk_out output + - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status + default: 0 + + cirrus,clock-skip: + description: + This mode allows the PLL to maintain lock even when CLK_IN + has missing pulses for up to 20 ms. + $ref: /schemas/types.yaml#/definitions/flag + + cirrus,dynamic-mode: + description: + In dynamic mode, the CLK_IN input is used to drive the + digital PLL of the silicon. + If not given, the static mode shall be used to derive the + output signal directly from the REF_CLK input. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,cs2000-cp.h> + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&rcar_sound 0>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt deleted file mode 100644 index 54e6df0bee8a..000000000000 --- a/Documentation/devicetree/bindings/clock/cs2000-cp.txt +++ /dev/null @@ -1,22 +0,0 @@ -CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier - -Required properties: - -- compatible: "cirrus,cs2000-cp" -- reg: The chip select number on the I2C bus -- clocks: common clock binding for CLK_IN, XTI/REF_CLK -- clock-names: CLK_IN : clk_in, XTI/REF_CLK : ref_clk -- #clock-cells: must be <0> - -Example: - -&i2c2 { - ... - cs2000: clk_multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&rcar_sound 0>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index ffd6ae0eed64..be66f1e8b547 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -191,11 +191,4 @@ examples: }; }; - /* Consumer referencing the 5P49V5923 pin OUT1 */ - consumer { - /* ... */ - clocks = <&vc5 1>; - /* ... */ - }; - ... diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml index f4833a29b79e..56f524780b1a 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml @@ -40,12 +40,3 @@ examples: compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - - pwm@208000 { - #pwm-cells = <2>; - compatible = "fsl,imx1-pwm"; - reg = <0x00208000 0x1000>; - interrupts = <34>; - clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml index 518ad9a4733c..e2d50544700a 100644 --- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml @@ -40,12 +40,3 @@ examples: reg = <0x10027000 0x800>; #clock-cells = <1>; }; - - serial@1000a000 { - compatible = "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, - <&clks IMX21_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index 5e296a00e14f..7e890ab9c77d 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -83,12 +83,3 @@ examples: reg = <0x80040000 0x2000>; #clock-cells = <1>; }; - - serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24>; - clocks = <&clks 32>; - dmas = <&dma_apbx 6>, <&dma_apbx 7>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml index 2a2b10778e72..1792e138984b 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml @@ -176,11 +176,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 79>, <&clks 50>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml index 160268f24487..99925aa22a4c 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -44,12 +44,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index f831b780f951..a542d680b1ca 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -106,12 +106,3 @@ examples: reg = <0x80040000 0x2000>; #clock-cells = <1>; }; - - serial@8006a000 { - compatible = "fsl,imx28-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; - clocks = <&clks 45>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml index d2336261c922..168c8ada5e81 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -110,11 +110,3 @@ examples: interrupts = <31>, <53>; #clock-cells = <1>; }; - - serial@43f90000 { - compatible = "fsl,imx31-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 10>, <&clks 30>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml index 3e20ccaf8131..6415bb6a8d04 100644 --- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml @@ -129,11 +129,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - mmc@53fb4000 { - compatible = "fsl,imx35-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <7>; - clocks = <&clks 9>, <&clks 8>, <&clks 43>; - clock-names = "ipg", "ahb", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml index 7caf5cee9199..739c3378f8c8 100644 --- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml @@ -108,14 +108,3 @@ examples: "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; }; - - mmc@40380000 { - compatible = "fsl,imx7ulp-usdhc"; - reg = <0x40380000 0x10000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, - <&scg1 IMX7ULP_CLK_NIC1_DIV>, - <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; - bus-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml index ee8efb4ed599..d06344d7e34f 100644 --- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml @@ -86,14 +86,3 @@ examples: "firc", "upll"; #clock-cells = <1>; }; - - mmc@40380000 { - compatible = "fsl,imx7ulp-usdhc"; - reg = <0x40380000 0x10000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, - <&scg1 IMX7ULP_CLK_NIC1_DIV>, - <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; - bus-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 0f6fe365ebf3..cb80105b3c70 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -101,14 +101,3 @@ examples: "sdhc0_lpcg_ahb_clk"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; - - mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "per"; - power-domains = <&pd IMX_SC_R_SDHC_0>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml new file mode 100644 index 000000000000..21a06194e4a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx93-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 Clock Control Module Binding + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + i.MX93 clock control module is an integrated clock controller, which + includes clock generator, clock gate and supplies to all modules. + +properties: + compatible: + enum: + - fsl,imx93-ccm + + reg: + maxItems: 1 + + clocks: + description: + specify the external clocks used by the CCM module. + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + + clock-names: + description: + specify the external clocks names used by the CCM module. + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + + '#clock-cells': + const: 1 + description: + See include/dt-bindings/clock/imx93-clock.h for the full list of + i.MX93 clock IDs. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml new file mode 100644 index 000000000000..03fc5c1a2939 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MXRT + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h + for the full list of i.MXRT clock IDs. + +properties: + compatible: + const: fsl,imxrt1050-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + description: 24m osc + maxItems: 1 + + clock-names: + const: osc + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imxrt1050-clock.h> + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml new file mode 100644 index 000000000000..0c15afa2214c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire Clock Control Module Binding + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + +description: | + Microchip PolarFire clock control (CLKCFG) is an integrated clock controller, + which gates and enables all peripheral clocks. + + This device tree binding describes 33 gate clocks. Clocks are referenced by + user nodes by the CLKCFG node phandle and the clock index in the group, from + 0 to 32. + +properties: + compatible: + const: microchip,mpfs-clkcfg + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h + for the full list of PolarFire clock IDs. + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Config node: + - | + #include <dt-bindings/clock/microchip,mpfs-clock.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + clkcfg: clock-controller@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>; + clocks = <&ref>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml index ec7ab1483652..1b2181f6d440 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -106,10 +106,3 @@ examples: #clock-cells = <1>; #reset-cells = <1>; }; - - usb-controller@c5004000 { - compatible = "nvidia,tegra20-ehci"; - reg = <0xc5004000 0x4000>; - clocks = <&car TEGRA124_CLK_USB2>; - resets = <&car TEGRA124_CLK_USB2>; - }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml index f832abb7f11a..bee2dd4b29bf 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -97,10 +97,3 @@ examples: power-domains = <&domain>; }; }; - - usb-controller@c5004000 { - compatible = "nvidia,tegra20-ehci"; - reg = <0xc5004000 0x4000>; - clocks = <&car TEGRA20_CLK_USB2>; - resets = <&car TEGRA20_CLK_USB2>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml new file mode 100644 index 000000000000..102eb95cb3fc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,9series.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Renesas 9-series I2C PCIe clock generators + +description: | + The Renesas 9-series are I2C PCIe clock generators providing + from 1 to 20 output clocks. + + When referencing the provided clock in the DT using phandle + and clock specifier, the following mapping applies: + + - 9FGV0241: + 0 -- DIF0 + 1 -- DIF1 + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + enum: + - renesas,9fgv0241 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + + clocks: + items: + - description: XTal input clock + + renesas,out-amplitude-microvolt: + enum: [ 600000, 700000, 800000, 900000 ] + description: Output clock signal amplitude + + renesas,out-spread-spectrum: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 100000, 99750, 99500 ] + description: Output clock down spread in pcm (1/1000 of percent) + +patternProperties: + "^DIF[0-19]$": + type: object + description: + Description of one of the outputs (DIF0..DIF19). + + properties: + renesas,slew-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 2000000, 3000000 ] + description: Output clock slew rate select in V/ns + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + rs9: clock-generator@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + #clock-cells = <1>; + + clocks = <&ref25m>; + + DIF0 { + renesas,slew-rate = <3000000>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml index c55a7c494e01..2197c952e21d 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml @@ -51,6 +51,18 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/r8a73a4-clock.h> + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a73a4-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll2s", "pll2h", "z", "z2", + "i", "m3", "b", "m1", "m2", + "zx", "zs", "hp"; + }; + sdhi2_clk: sdhi2_clk@e615007c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index 30b2e3d0d25d..bd3af8fc616b 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -4,13 +4,13 @@ $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode +title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: | - On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module + On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module Standby Mode share the same register block. They provide the following functionalities: @@ -22,7 +22,9 @@ description: | properties: compatible: - const: renesas,r9a07g044-cpg # RZ/G2{L,LC} + enum: + - renesas,r9a07g044-cpg # RZ/G2{L,LC} + - renesas,r9a07g054-cpg # RZ/V2L reg: maxItems: 1 @@ -40,9 +42,9 @@ properties: description: | - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" and a core clock reference, as defined in - <dt-bindings/clock/r9a07g044-cpg.h> + <dt-bindings/clock/r9a07g*-cpg.h> - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>. + a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>. const: 2 '#power-domain-cells': @@ -56,7 +58,7 @@ properties: '#reset-cells': description: The single reset specifier cell must be the module number, as defined in - the <dt-bindings/clock/r9a07g044-cpg.h>. + the <dt-bindings/clock/r9a07g0*-cpg.h>. const: 1 required: diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml new file mode 100644 index 000000000000..8f49a1ae03f1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 Audio Clock Generator + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +properties: + compatible: + const: starfive,jh7100-audclk + + reg: + maxItems: 1 + + clocks: + items: + - description: Audio source clock + - description: External 12.288MHz clock + - description: Domain 7 AHB bus clock + + clock-names: + items: + - const: audio_src + - const: audio_12288 + - const: dom7ahb_bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7100.h> + + clock-controller@10480000 { + compatible = "starfive,jh7100-audclk"; + reg = <0x10480000 0x10000>; + clocks = <&clkgen JH7100_CLK_AUDIO_SRC>, + <&clkgen JH7100_CLK_AUDIO_12288>, + <&clkgen JH7100_CLK_DOM7AHB_BUS>; + clock-names = "audio_src", "audio_12288", "dom7ahb_bus"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index 79d0358e2f61..620f01775e42 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -36,6 +36,7 @@ properties: - renesas,intc-ex-r8a77980 # R-Car V3H - renesas,intc-ex-r8a77990 # R-Car E3 - renesas,intc-ex-r8a77995 # R-Car D3 + - renesas,intc-ex-r8a779a0 # R-Car V3U - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 28b6b17fe4b2..27092c6a86c4 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -35,6 +35,10 @@ description: contains a specific memory layout, which is documented in chapter 8 of the SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. + The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the + T-HEAD PLIC implementation requires setting a delegation bit to allow access + from S-mode. So add thead,c900-plic to distinguish them. + maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> @@ -42,12 +46,17 @@ maintainers: properties: compatible: - items: - - enum: - - sifive,fu540-c000-plic - - starfive,jh7100-plic - - canaan,k210-plic - - const: sifive,plic-1.0.0 + oneOf: + - items: + - enum: + - sifive,fu540-c000-plic + - starfive,jh7100-plic + - canaan,k210-plic + - const: sifive,plic-1.0.0 + - items: + - enum: + - allwinner,sun20i-d1-plic + - const: thead,c900-plic reg: maxItems: 1 @@ -62,6 +71,7 @@ properties: interrupts-extended: minItems: 1 + maxItems: 15872 description: Specifies which contexts are connected to the PLIC, with "-1" specifying that a context is not present. Each node pointed to should be a @@ -90,12 +100,11 @@ examples: #interrupt-cells = <1>; compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; interrupt-controller; - interrupts-extended = < - &cpu0_intc 11 - &cpu1_intc 11 &cpu1_intc 9 - &cpu2_intc 11 &cpu2_intc 9 - &cpu3_intc 11 &cpu3_intc 9 - &cpu4_intc 11 &cpu4_intc 9>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; reg = <0xc000000 0x4000000>; riscv,ndev = <10>; }; diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 0968b40aef1e..e3501bfa22e9 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index b86edf67ce62..58ecc62adfaa 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -107,6 +107,10 @@ properties: - const: imem - const: config + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the AOSS side-channel message RAM + qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. @@ -222,6 +226,8 @@ examples: "imem", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..3ec2d7b83775 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -23,8 +23,9 @@ properties: minItems: 1 maxItems: 256 items: - minimum: 0 - maximum: 256 + items: + - minimum: 0 + maximum: 256 description: Chip select used by the device. diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index 136f8da3d0e2..4f373a8ec47b 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -462,6 +462,10 @@ operation table looks like the following:: struct iov_iter *iter, netfs_io_terminated_t term_func, void *term_func_priv); + + int (*query_occupancy)(struct netfs_cache_resources *cres, + loff_t start, size_t len, size_t granularity, + loff_t *_data_start, size_t *_data_len); }; With a termination handler function pointer:: @@ -536,6 +540,18 @@ The methods defined in the table are: indicating whether the termination is definitely happening in the caller's context. + * ``query_occupancy()`` + + [Required] Called to find out where the next piece of data is within a + particular region of the cache. The start and length of the region to be + queried are passed in, along with the granularity to which the answer needs + to be aligned. The function passes back the start and length of the data, + if any, available within that region. Note that there may be a hole at the + front. + + It returns 0 if some data was found, -ENODATA if there was no usable data + within the region or -ENOBUFS if there is no caching on this file. + Note that these methods are passed a pointer to the cache resource structure, not the read request structure as they could be used in other situations where there isn't a read request structure as well, such as writing dirty data to the diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index da138dd39883..a1212b5b3026 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -300,30 +300,6 @@ Contact: Daniel Vetter, Noralf Tronnes Level: Advanced -Garbage collect fbdev scrolling acceleration --------------------------------------------- - -Scroll acceleration has been disabled in fbcon. Now it works as the old -SCROLL_REDRAW mode. A ton of code was removed in fbcon.c and the hook bmove was -removed from fbcon_ops. -Remaining tasks: - -- a bunch of the hooks in fbcon_ops could be removed or simplified by calling - directly instead of the function table (with a switch on p->rotate) - -- fb_copyarea is unused after this, and can be deleted from all drivers - -- after that, fb_copyarea can be deleted from fb_ops in include/linux/fb.h as - well as cfb_copyarea - -Note that not all acceleration code can be deleted, since clearing and cursor -support is still accelerated, which might be good candidates for further -deletion projects. - -Contact: Daniel Vetter - -Level: Intermediate - idr_init_base() --------------- diff --git a/Documentation/index.rst b/Documentation/index.rst index 2b4de3926858..b58692d687f6 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -166,6 +166,7 @@ to ReStructured Text format, or are simply too old. .. toctree:: :maxdepth: 2 + tools/index staging/index watch_queue diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst index e6cd40663ea5..4cbd50edf277 100644 --- a/Documentation/kernel-hacking/locking.rst +++ b/Documentation/kernel-hacking/locking.rst @@ -295,7 +295,7 @@ Pete Zaitcev gives the following summary: - If you are in a process context (any syscall) and want to lock other process out, use a mutex. You can take a mutex and sleep - (``copy_from_user*(`` or ``kmalloc(x,GFP_KERNEL)``). + (``copy_from_user()`` or ``kmalloc(x,GFP_KERNEL)``). - Otherwise (== data can be touched in an interrupt), use spin_lock_irqsave() and diff --git a/Documentation/tools/index.rst b/Documentation/tools/index.rst new file mode 100644 index 000000000000..0bb1e61bdcc0 --- /dev/null +++ b/Documentation/tools/index.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Kernel tools +============ + +This book covers user-space tools that are shipped with the kernel source; +more additions are needed here: + +.. toctree:: + :maxdepth: 1 + + rtla/index + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/tools/rtla/index.rst b/Documentation/tools/rtla/index.rst new file mode 100644 index 000000000000..840f0bf3e803 --- /dev/null +++ b/Documentation/tools/rtla/index.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +The realtime Linux analysis tool +================================ + +RTLA provides a set of tools for the analysis of the kernel's realtime +behavior on specific hardware. + +.. toctree:: + :maxdepth: 1 + + rtla + rtla-osnoise + rtla-osnoise-hist + rtla-osnoise-top + rtla-timerlat + rtla-timerlat-hist + rtla-timerlat-top + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 687efcf245c1..e6fce2cbd99e 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -115,6 +115,7 @@ Code Seq# Include File Comments 'B' 00-1F linux/cciss_ioctl.h conflict! 'B' 00-0F include/linux/pmu.h conflict! 'B' C0-FF advanced bbus <mailto:maassen@uni-freiburg.de> +'B' 00-0F xen/xenbus_dev.h conflict! 'C' all linux/soundcard.h conflict! 'C' 01-2F linux/capi.h conflict! 'C' F0-FF drivers/net/wan/cosa.h conflict! @@ -134,6 +135,7 @@ Code Seq# Include File Comments 'F' 80-8F linux/arcfb.h conflict! 'F' DD video/sstfb.h conflict! 'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict! +'G' 00-0F xen/gntalloc.h, xen/gntdev.h conflict! 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! @@ -176,6 +178,7 @@ Code Seq# Include File Comments 'P' 60-6F sound/sscape_ioctl.h conflict! 'P' 00-0F drivers/usb/class/usblp.c conflict! 'P' 01-09 drivers/misc/pci_endpoint_test.c conflict! +'P' 00-0F xen/privcmd.h conflict! 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index bb8cfddbb22d..a4267104db50 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -3268,6 +3268,7 @@ number. :Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device (no set) :Type: device ioctl, vm ioctl, vcpu ioctl :Parameters: struct kvm_device_attr :Returns: 0 on success, -1 on error @@ -3302,7 +3303,8 @@ transferred is defined by the particular attribute. ------------------------ :Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, - KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device :Type: device ioctl, vm ioctl, vcpu ioctl :Parameters: struct kvm_device_attr :Returns: 0 on success, -1 on error diff --git a/Documentation/vm/page_table_check.rst b/Documentation/vm/page_table_check.rst index 81f521ff7ea7..1a09472f10a3 100644 --- a/Documentation/vm/page_table_check.rst +++ b/Documentation/vm/page_table_check.rst @@ -9,7 +9,7 @@ Page Table Check Introduction ============ -Page table check allows to hardern the kernel by ensuring that some types of +Page table check allows to harden the kernel by ensuring that some types of the memory corruptions are prevented. Page table check performs extra verifications at the time when new pages become |