diff options
Diffstat (limited to 'Documentation')
246 files changed, 7033 insertions, 1739 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs new file mode 100644 index 000000000000..14343e237e83 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs @@ -0,0 +1,9 @@ +What: /config/usb-gadget/gadget/functions/ffs.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: The purpose of this directory is to create and remove it. + + A corresponding USB function instance is created/removed. + There are no attributes here. + + All parameters are set through FunctionFS. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback new file mode 100644 index 000000000000..852b2365a5b5 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback @@ -0,0 +1,8 @@ +What: /config/usb-gadget/gadget/functions/Loopback.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: + The attributes: + + qlen - depth of loopback queue + bulk_buflen - buffer length diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink new file mode 100644 index 000000000000..a30f3093ef6c --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -0,0 +1,12 @@ +What: /config/usb-gadget/gadget/functions/SourceSink.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: + The attributes: + + pattern - 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval - 1..16 + isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult - 0..2 (hs/ss only) + isoc_maxburst - 0..15 (ss only) + qlen - buffer length diff --git a/Documentation/ABI/testing/debugfs-driver-genwqe b/Documentation/ABI/testing/debugfs-driver-genwqe new file mode 100644 index 000000000000..1c2f25674e8c --- /dev/null +++ b/Documentation/ABI/testing/debugfs-driver-genwqe @@ -0,0 +1,91 @@ +What: /sys/kernel/debug/genwqe/genwqe<n>_card/ddcb_info +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: DDCB queue dump used for debugging queueing problems. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_regs +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Dump of the current error registers. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid0 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID0 (unit id 0). + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid1 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID1. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid2 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID2. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Dump of the error registers before the last reset of + the card occured. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID0 before card was reset. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid1 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID1 before card was reset. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid2 +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Internal chip state of UID2 before card was reset. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/info +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Comprehensive summary of bitstream version and software + version. Used bitstream and bitstream clocking information. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/err_inject +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Possibility to inject error cases to ensure that the drivers + error handling code works well. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/vf<0..14>_jobtimeout_msec +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Default VF timeout 250ms. Testing might require 1000ms. + Using 0 will use the cards default value (whatever that is). + + The timeout depends on the max number of available cards + in the system and the maximum allowed queue size. + + The driver ensures that the settings are done just before + the VFs get enabled. Changing the timeouts in flight is not + possible. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/jobtimer +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Dump job timeout register values for PF and VFs. + Only available for PF. + +What: /sys/kernel/debug/genwqe/genwqe<n>_card/queue_working_time +Date: Dec 2013 +Contact: haver@linux.vnet.ibm.com +Description: Dump queue working time register values for PF and VFs. + Only available for PF. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index b20e829d350f..6e02c5029152 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -197,6 +197,19 @@ Description: Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal. +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw +KernelVersion: 3.14 +Contact: linux-iio@vger.kernel.org +Description: + Raw humidity measurement of air. Units after application of + scale and offset are milli percent. + +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input +KernelVersion: 3.14 +Contact: linux-iio@vger.kernel.org +Description: + Scaled humidity measurement in milli percent. + What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 5210a51c90fd..a3c5a6685036 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -70,18 +70,15 @@ Date: September, 2011 Contact: Neil Horman <nhorman@tuxdriver.com> Description: The /sys/devices/.../msi_irqs directory contains a variable set - of sub-directories, with each sub-directory being named after a - corresponding msi irq vector allocated to that device. Each - numbered sub-directory N contains attributes of that irq. - Note that this directory is not created for device drivers which - do not support msi irqs + of files, with each file being named after a corresponding msi + irq vector allocated to that device. -What: /sys/bus/pci/devices/.../msi_irqs/<N>/mode +What: /sys/bus/pci/devices/.../msi_irqs/<N> Date: September 2011 Contact: Neil Horman <nhorman@tuxdriver.com> Description: This attribute indicates the mode that the irq vector named by - the parent directory is in (msi vs. msix) + the file is in (msi vs. msix) What: /sys/bus/pci/devices/.../remove Date: January 2009 diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 1430f584b266..614d451cee41 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -50,13 +50,19 @@ Description: This may allow the driver to support more hardware than was included in the driver's static device ID support table at compile time. The format for the device ID is: - idVendor idProduct bInterfaceClass. + idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct The vendor ID and device ID fields are required, the - interface class is optional. + rest is optional. The Ref* tuple can be used to tell the + driver to use the same driver_data for the new device as + it is used for the reference device. Upon successfully adding an ID, the driver will probe for the device and attempt to bind to it. For example: # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id + Here add a new device (0458:7045) using driver_data from + an already supported device (0458:704c): + # echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id + Reading from this file will list all dynamically added device IDs in the same format, with one entry per line. For example: diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 468e4d48f884..d5a0d33c571f 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -200,3 +200,27 @@ Description: address and size of the percpu note. note of cpu#. crash_notes_size: size of the note of cpu#. + + +What: /sys/devices/system/cpu/intel_pstate/max_perf_pct + /sys/devices/system/cpu/intel_pstate/min_perf_pct + /sys/devices/system/cpu/intel_pstate/no_turbo +Date: February 2013 +Contact: linux-pm@vger.kernel.org +Description: Parameters for the Intel P-state driver + + Logic for selecting the current P-state in Intel + Sandybridge+ processors. The three knobs control + limits for the P-state that will be requested by the + driver. + + max_perf_pct: limits the maximum P state that will be requested by + the driver stated as a percentage of the available performance. + + min_perf_pct: limits the minimum P state that will be requested by + the driver stated as a percentage of the available performance. + + no_turbo: limits the driver to selecting P states below the turbo + frequency range. + + More details can be found in Documentation/cpu-freq/intel-pstate.txt diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe new file mode 100644 index 000000000000..1870737a1f5e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-genwqe @@ -0,0 +1,62 @@ +What: /sys/class/genwqe/genwqe<n>_card/version +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Unique bitstream identification e.g. + '0000000330336283.00000000475a4950'. + +What: /sys/class/genwqe/genwqe<n>_card/appid +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Identifies the currently active card application e.g. 'GZIP' + for compression/decompression. + +What: /sys/class/genwqe/genwqe<n>_card/type +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Type of the card e.g. 'GenWQE5-A7'. + +What: /sys/class/genwqe/genwqe<n>_card/curr_bitstream +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Currently active bitstream. 1 is default, 0 is backup. + +What: /sys/class/genwqe/genwqe<n>_card/next_bitstream +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Interface to set the next bitstream to be used. + +What: /sys/class/genwqe/genwqe<n>_card/tempsens +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Interface to read the cards temperature sense register. + +What: /sys/class/genwqe/genwqe<n>_card/freerunning_timer +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Interface to read the cards free running timer. + Used for performance and utilization measurements. + +What: /sys/class/genwqe/genwqe<n>_card/queue_working_time +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Interface to read queue working time. + Used for performance and utilization measurements. + +What: /sys/class/genwqe/genwqe<n>_card/state +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: State of the card: "unused", "used", "error". + +What: /sys/class/genwqe/genwqe<n>_card/base_clock +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Base clock frequency of the card. + +What: /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs +Date: Oct 2013 +Contact: haver@linux.vnet.ibm.com +Description: Enable VFs (1..15): + sudo sh -c 'echo 15 > \ + /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs' + Disable VFs: + Write a 0 into the same sysfs entry. diff --git a/Documentation/ABI/testing/sysfs-firmware-efi b/Documentation/ABI/testing/sysfs-firmware-efi new file mode 100644 index 000000000000..05874da7ce80 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-efi @@ -0,0 +1,20 @@ +What: /sys/firmware/efi/fw_vendor +Date: December 2013 +Contact: Dave Young <dyoung@redhat.com> +Description: It shows the physical address of firmware vendor field in the + EFI system table. +Users: Kexec + +What: /sys/firmware/efi/runtime +Date: December 2013 +Contact: Dave Young <dyoung@redhat.com> +Description: It shows the physical address of runtime service table entry in + the EFI system table. +Users: Kexec + +What: /sys/firmware/efi/config_table +Date: December 2013 +Contact: Dave Young <dyoung@redhat.com> +Description: It shows the physical address of config table entry in the EFI + system table. +Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map new file mode 100644 index 000000000000..c61b9b348e99 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map @@ -0,0 +1,34 @@ +What: /sys/firmware/efi/runtime-map/ +Date: December 2013 +Contact: Dave Young <dyoung@redhat.com> +Description: Switching efi runtime services to virtual mode requires + that all efi memory ranges which have the runtime attribute + bit set to be mapped to virtual addresses. + + The efi runtime services can only be switched to virtual + mode once without rebooting. The kexec kernel must maintain + the same physical to virtual address mappings as the first + kernel. The mappings are exported to sysfs so userspace tools + can reassemble them and pass them into the kexec kernel. + + /sys/firmware/efi/runtime-map/ is the directory the kernel + exports that information in. + + subdirectories are named with the number of the memory range: + + /sys/firmware/efi/runtime-map/0 + /sys/firmware/efi/runtime-map/1 + /sys/firmware/efi/runtime-map/2 + /sys/firmware/efi/runtime-map/3 + ... + + Each subdirectory contains five files: + + attribute : The attributes of the memory range. + num_pages : The size of the memory range in pages. + phys_addr : The physical address of the memory range. + type : The type of the memory range. + virt_addr : The virtual address of the memory range. + + Above values are all hexadecimal numbers with the '0x' prefix. +Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 31942efcaf0e..32b0809203dd 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -24,3 +24,34 @@ Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> Description: Controls the victim selection policy for garbage collection. + +What: /sys/fs/f2fs/<disk>/reclaim_segments +Date: October 2013 +Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> +Description: + Controls the issue rate of segment discard commands. + +What: /sys/fs/f2fs/<disk>/ipu_policy +Date: November 2013 +Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> +Description: + Controls the in-place-update policy. + +What: /sys/fs/f2fs/<disk>/min_ipu_util +Date: November 2013 +Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> +Description: + Controls the FS utilization condition for the in-place-update + policies. + +What: /sys/fs/f2fs/<disk>/max_small_discards +Date: November 2013 +Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> +Description: + Controls the issue rate of small discard commands. + +What: /sys/fs/f2fs/<disk>/max_victim_search +Date: January 2014 +Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> +Description: + Controls the number of trials to find a victim segment. diff --git a/Documentation/ABI/testing/sysfs-kernel-boot_params b/Documentation/ABI/testing/sysfs-kernel-boot_params new file mode 100644 index 000000000000..eca38ce2852d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-boot_params @@ -0,0 +1,38 @@ +What: /sys/kernel/boot_params +Date: December 2013 +Contact: Dave Young <dyoung@redhat.com> +Description: The /sys/kernel/boot_params directory contains two + files: "data" and "version" and one subdirectory "setup_data". + It is used to export the kernel boot parameters of an x86 + platform to userspace for kexec and debugging purpose. + + If there's no setup_data in boot_params the subdirectory will + not be created. + + "data" file is the binary representation of struct boot_params. + + "version" file is the string representation of boot + protocol version. + + "setup_data" subdirectory contains the setup_data data + structure in boot_params. setup_data is maintained in kernel + as a link list. In "setup_data" subdirectory there's one + subdirectory for each link list node named with the number + of the list nodes. The list node subdirectory contains two + files "type" and "data". "type" file is the string + representation of setup_data type. "data" file is the binary + representation of setup_data payload. + + The whole boot_params directory structure is like below: + /sys/kernel/boot_params + |__ data + |__ setup_data + | |__ 0 + | | |__ data + | | |__ type + | |__ 1 + | |__ data + | |__ type + |__ version + +Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo b/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo new file mode 100644 index 000000000000..7bd81168e063 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo @@ -0,0 +1,14 @@ +What: /sys/kernel/vmcoreinfo +Date: October 2007 +KernelVersion: 2.6.24 +Contact: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> + Kexec Mailing List <kexec@lists.infradead.org> + Vivek Goyal <vgoyal@redhat.com> +Description + Shows physical address and size of vmcoreinfo ELF note. + First value contains physical address of note in hex and + second value contains the size of note in hex. This ELF + note info is parsed by second kernel and exported to user + space as part of ELF note in /proc/vmcore file. This note + contains various information like struct size, symbol + values, page size etc. diff --git a/Documentation/ABI/testing/sysfs-platform-tahvo-usb b/Documentation/ABI/testing/sysfs-platform-tahvo-usb new file mode 100644 index 000000000000..f6e20ce4b538 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-tahvo-usb @@ -0,0 +1,16 @@ +What: /sys/bus/platform/devices/tahvo-usb/otg_mode +Date: December 2013 +Contact: Aaro Koskinen <aaro.koskinen@iki.fi> +Description: + Set or read the current OTG mode. Valid values are "host" and + "peripheral". + + Reading: returns the current mode. + +What: /sys/bus/platform/devices/tahvo-usb/vbus +Date: December 2013 +Contact: Aaro Koskinen <aaro.koskinen@iki.fi> +Description: + Read the current VBUS state. + + Reading: returns "on" or "off". diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore index 720f245ceb1f..7ebd5465d927 100644 --- a/Documentation/DocBook/.gitignore +++ b/Documentation/DocBook/.gitignore @@ -10,5 +10,6 @@ *.out *.png *.gif +*.svg media-indices.tmpl media-entities.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index bc3d9f8c0a90..0f9c6ff41aac 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -54,6 +54,7 @@ htmldocs: $(HTML) MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) + $(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9) installmandocs: mandocs mkdir -p /usr/local/man/man9/ @@ -145,7 +146,7 @@ build_main_index = rm -rf $(main_idx); \ cat $(HTML) >> $(main_idx) quiet_cmd_db2html = HTML $@ - cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ + cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \ $(patsubst %.html,%,$(notdir $@))</a><p>' > $@ @@ -159,7 +160,7 @@ quiet_cmd_db2html = HTML $@ cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi quiet_cmd_db2man = MAN $@ - cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi + cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi %.9 : %.xml @(which xmlto > /dev/null 2>&1) || \ (echo "*** You need to install xmlto ***"; \ diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index f75ab4c1b281..ecfd0ea40661 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -109,6 +109,7 @@ X!Ilib/string.c <sect1><title>The Slab Cache</title> !Iinclude/linux/slab.h !Emm/slab.c +!Emm/util.c </sect1> <sect1><title>User Space Memory Access</title> !Iarch/x86/include/asm/uaccess_32.h diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 27faae3e3846..57cf5efb044d 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -112,7 +112,7 @@ required reading: Other excellent descriptions of how to create patches properly are: "The Perfect Patch" - http://kerneltrap.org/node/3737 + http://www.ozlabs.org/~akpm/stuff/tpp.txt "Linux kernel patch submission format" http://linux.yyz.us/patch-format.html @@ -579,7 +579,7 @@ all time. It should describe the patch completely, containing: For more details on what this should all look like, please see the ChangeLog section of the document: "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt index 9bc95942ec22..03df71aeb38c 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/IRQ-domain.txt @@ -141,7 +141,7 @@ will use a legacy domain only if an IRQ range is supplied by the system and will otherwise use a linear domain mapping. The semantics of this call are such that if an IRQ range is specified then descriptors will be allocated on-the-fly for it, and if no range is -specified it will fall through to irq_domain_add_linear() which meand +specified it will fall through to irq_domain_add_linear() which means *no* irq descriptors will be allocated. A typical use case for simple domains is where an irqchip provider diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX index 812b17fe3ed0..147231f1613e 100644 --- a/Documentation/PCI/00-INDEX +++ b/Documentation/PCI/00-INDEX @@ -2,12 +2,12 @@ - this file MSI-HOWTO.txt - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. -PCI-DMA-mapping.txt - - info for PCI drivers using DMA portably across all platforms PCIEBUS-HOWTO.txt - a guide describing the PCI Express Port Bus driver pci-error-recovery.txt - info on PCI error recovery +pci-iov-howto.txt + - the PCI Express I/O Virtualization HOWTO pci.txt - info on the PCI subsystem for device driver authors pcieaer-howto.txt diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index a09178086c30..a8d01005f480 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -82,93 +82,111 @@ Most of the hard work is done for the driver in the PCI layer. It simply has to request that the PCI layer set up the MSI capability for this device. -4.2.1 pci_enable_msi +4.2.1 pci_enable_msi_range -int pci_enable_msi(struct pci_dev *dev) +int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) -A successful call allocates ONE interrupt to the device, regardless -of how many MSIs the device supports. The device is switched from -pin-based interrupt mode to MSI mode. The dev->irq number is changed -to a new number which represents the message signaled interrupt; -consequently, this function should be called before the driver calls -request_irq(), because an MSI is delivered via a vector that is -different from the vector of a pin-based interrupt. +This function allows a device driver to request any number of MSI +interrupts within specified range from 'minvec' to 'maxvec'. -4.2.2 pci_enable_msi_block +If this function returns a positive number it indicates the number of +MSI interrupts that have been successfully allocated. In this case +the device is switched from pin-based interrupt mode to MSI mode and +updates dev->irq to be the lowest of the new interrupts assigned to it. +The other interrupts assigned to the device are in the range dev->irq +to dev->irq + returned value - 1. Device driver can use the returned +number of successfully allocated MSI interrupts to further allocate +and initialize device resources. -int pci_enable_msi_block(struct pci_dev *dev, int count) +If this function returns a negative number, it indicates an error and +the driver should not attempt to request any more MSI interrupts for +this device. -This variation on the above call allows a device driver to request multiple -MSIs. The MSI specification only allows interrupts to be allocated in -powers of two, up to a maximum of 2^5 (32). +This function should be called before the driver calls request_irq(), +because MSI interrupts are delivered via vectors that are different +from the vector of a pin-based interrupt. -If this function returns 0, it has succeeded in allocating at least as many -interrupts as the driver requested (it may have allocated more in order -to satisfy the power-of-two requirement). In this case, the function -enables MSI on this device and updates dev->irq to be the lowest of -the new interrupts assigned to it. The other interrupts assigned to -the device are in the range dev->irq to dev->irq + count - 1. +It is ideal if drivers can cope with a variable number of MSI interrupts; +there are many reasons why the platform may not be able to provide the +exact number that a driver asks for. -If this function returns a negative number, it indicates an error and -the driver should not attempt to request any more MSI interrupts for -this device. If this function returns a positive number, it is -less than 'count' and indicates the number of interrupts that could have -been allocated. In neither case is the irq value updated or the device -switched into MSI mode. - -The device driver must decide what action to take if -pci_enable_msi_block() returns a value less than the number requested. -For instance, the driver could still make use of fewer interrupts; -in this case the driver should call pci_enable_msi_block() -again. Note that it is not guaranteed to succeed, even when the -'count' has been reduced to the value returned from a previous call to -pci_enable_msi_block(). This is because there are multiple constraints -on the number of vectors that can be allocated; pci_enable_msi_block() -returns as soon as it finds any constraint that doesn't allow the -call to succeed. - -4.2.3 pci_enable_msi_block_auto - -int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count) - -This variation on pci_enable_msi() call allows a device driver to request -the maximum possible number of MSIs. The MSI specification only allows -interrupts to be allocated in powers of two, up to a maximum of 2^5 (32). - -If this function returns a positive number, it indicates that it has -succeeded and the returned value is the number of allocated interrupts. In -this case, the function enables MSI on this device and updates dev->irq to -be the lowest of the new interrupts assigned to it. The other interrupts -assigned to the device are in the range dev->irq to dev->irq + returned -value - 1. +There could be devices that can not operate with just any number of MSI +interrupts within a range. See chapter 4.3.1.3 to get the idea how to +handle such devices for MSI-X - the same logic applies to MSI. -If this function returns a negative number, it indicates an error and -the driver should not attempt to request any more MSI interrupts for -this device. +4.2.1.1 Maximum possible number of MSI interrupts + +The typical usage of MSI interrupts is to allocate as many vectors as +possible, likely up to the limit returned by pci_msi_vec_count() function: + +static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) +{ + return pci_enable_msi_range(pdev, 1, nvec); +} + +Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, +the value of 0 would be meaningless and could result in error. -If the device driver needs to know the number of interrupts the device -supports it can pass the pointer count where that number is stored. The -device driver must decide what action to take if pci_enable_msi_block_auto() -succeeds, but returns a value less than the number of interrupts supported. -If the device driver does not need to know the number of interrupts -supported, it can set the pointer count to NULL. +Some devices have a minimal limit on number of MSI interrupts. +In this case the function could look like this: -4.2.4 pci_disable_msi +static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) +{ + return pci_enable_msi_range(pdev, FOO_DRIVER_MINIMUM_NVEC, nvec); +} + +4.2.1.2 Exact number of MSI interrupts + +If a driver is unable or unwilling to deal with a variable number of MSI +interrupts it could request a particular number of interrupts by passing +that number to pci_enable_msi_range() function as both 'minvec' and 'maxvec' +parameters: + +static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) +{ + return pci_enable_msi_range(pdev, nvec, nvec); +} + +4.2.1.3 Single MSI mode + +The most notorious example of the request type described above is +enabling the single MSI mode for a device. It could be done by passing +two 1s as 'minvec' and 'maxvec': + +static int foo_driver_enable_single_msi(struct pci_dev *pdev) +{ + return pci_enable_msi_range(pdev, 1, 1); +} + +4.2.2 pci_disable_msi void pci_disable_msi(struct pci_dev *dev) -This function should be used to undo the effect of pci_enable_msi() or -pci_enable_msi_block() or pci_enable_msi_block_auto(). Calling it restores -dev->irq to the pin-based interrupt number and frees the previously -allocated message signaled interrupt(s). The interrupt may subsequently be -assigned to another device, so drivers should not cache the value of -dev->irq. +This function should be used to undo the effect of pci_enable_msi_range(). +Calling it restores dev->irq to the pin-based interrupt number and frees +the previously allocated MSIs. The interrupts may subsequently be assigned +to another device, so drivers should not cache the value of dev->irq. Before calling this function, a device driver must always call free_irq() on any interrupt for which it previously called request_irq(). Failure to do so results in a BUG_ON(), leaving the device with MSI enabled and thus leaking its vector. +4.2.3 pci_msi_vec_count + +int pci_msi_vec_count(struct pci_dev *dev) + +This function could be used to retrieve the number of MSI vectors the +device requested (via the Multiple Message Capable register). The MSI +specification only allows the returned value to be a power of two, +up to a maximum of 2^5 (32). + +If this function returns a negative number, it indicates the device is +not capable of sending MSIs. + +If this function returns a positive number, it indicates the maximum +number of MSI interrupt vectors that could be allocated. + 4.3 Using MSI-X The MSI-X capability is much more flexible than the MSI capability. @@ -188,26 +206,31 @@ in each element of the array to indicate for which entries the kernel should assign interrupts; it is invalid to fill in two entries with the same number. -4.3.1 pci_enable_msix +4.3.1 pci_enable_msix_range -int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) +int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, + int minvec, int maxvec) -Calling this function asks the PCI subsystem to allocate 'nvec' MSIs. +Calling this function asks the PCI subsystem to allocate any number of +MSI-X interrupts within specified range from 'minvec' to 'maxvec'. The 'entries' argument is a pointer to an array of msix_entry structs -which should be at least 'nvec' entries in size. On success, the -device is switched into MSI-X mode and the function returns 0. -The 'vector' member in each entry is populated with the interrupt number; +which should be at least 'maxvec' entries in size. + +On success, the device is switched into MSI-X mode and the function +returns the number of MSI-X interrupts that have been successfully +allocated. In this case the 'vector' member in entries numbered from +0 to the returned value - 1 is populated with the interrupt number; the driver should then call request_irq() for each 'vector' that it decides to use. The device driver is responsible for keeping track of the interrupts assigned to the MSI-X vectors so it can free them again later. +Device driver can use the returned number of successfully allocated MSI-X +interrupts to further allocate and initialize device resources. If this function returns a negative number, it indicates an error and the driver should not attempt to allocate any more MSI-X interrupts for -this device. If it returns a positive number, it indicates the maximum -number of interrupt vectors that could have been allocated. See example -below. +this device. -This function, in contrast with pci_enable_msi(), does not adjust +This function, in contrast with pci_enable_msi_range(), does not adjust dev->irq. The device will not generate interrupts for this interrupt number once MSI-X is enabled. @@ -218,28 +241,103 @@ It is ideal if drivers can cope with a variable number of MSI-X interrupts; there are many reasons why the platform may not be able to provide the exact number that a driver asks for. -A request loop to achieve that might look like: +There could be devices that can not operate with just any number of MSI-X +interrupts within a range. E.g., an network adapter might need let's say +four vectors per each queue it provides. Therefore, a number of MSI-X +interrupts allocated should be a multiple of four. In this case interface +pci_enable_msix_range() can not be used alone to request MSI-X interrupts +(since it can allocate any number within the range, without any notion of +the multiple of four) and the device driver should master a custom logic +to request the required number of MSI-X interrupts. + +4.3.1.1 Maximum possible number of MSI-X interrupts + +The typical usage of MSI-X interrupts is to allocate as many vectors as +possible, likely up to the limit returned by pci_msix_vec_count() function: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - while (nvec >= FOO_DRIVER_MINIMUM_NVEC) { - rc = pci_enable_msix(adapter->pdev, - adapter->msix_entries, nvec); - if (rc > 0) - nvec = rc; - else - return rc; + return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, + 1, nvec); +} + +Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, +the value of 0 would be meaningless and could result in error. + +Some devices have a minimal limit on number of MSI-X interrupts. +In this case the function could look like this: + +static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) +{ + return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, + FOO_DRIVER_MINIMUM_NVEC, nvec); +} + +4.3.1.2 Exact number of MSI-X interrupts + +If a driver is unable or unwilling to deal with a variable number of MSI-X +interrupts it could request a particular number of interrupts by passing +that number to pci_enable_msix_range() function as both 'minvec' and 'maxvec' +parameters: + +static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) +{ + return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, + nvec, nvec); +} + +4.3.1.3 Specific requirements to the number of MSI-X interrupts + +As noted above, there could be devices that can not operate with just any +number of MSI-X interrupts within a range. E.g., let's assume a device that +is only capable sending the number of MSI-X interrupts which is a power of +two. A routine that enables MSI-X mode for such device might look like this: + +/* + * Assume 'minvec' and 'maxvec' are non-zero + */ +static int foo_driver_enable_msix(struct foo_adapter *adapter, + int minvec, int maxvec) +{ + int rc; + + minvec = roundup_pow_of_two(minvec); + maxvec = rounddown_pow_of_two(maxvec); + + if (minvec > maxvec) + return -ERANGE; + +retry: + rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + maxvec, maxvec); + /* + * -ENOSPC is the only error code allowed to be analized + */ + if (rc == -ENOSPC) { + if (maxvec == 1) + return -ENOSPC; + + maxvec /= 2; + + if (minvec > maxvec) + return -ENOSPC; + + goto retry; } - return -ENOSPC; + return rc; } +Note how pci_enable_msix_range() return value is analized for a fallback - +any error code other than -ENOSPC indicates a fatal error and should not +be retried. + 4.3.2 pci_disable_msix void pci_disable_msix(struct pci_dev *dev) -This function should be used to undo the effect of pci_enable_msix(). It frees -the previously allocated message signaled interrupts. The interrupts may +This function should be used to undo the effect of pci_enable_msix_range(). +It frees the previously allocated MSI-X interrupts. The interrupts may subsequently be assigned to another device, so drivers should not cache the value of the 'vector' elements over a call to pci_disable_msix(). @@ -255,18 +353,32 @@ MSI-X Table. This address is mapped by the PCI subsystem, and should not be accessed directly by the device driver. If the driver wishes to mask or unmask an interrupt, it should call disable_irq() / enable_irq(). +4.3.4 pci_msix_vec_count + +int pci_msix_vec_count(struct pci_dev *dev) + +This function could be used to retrieve number of entries in the device +MSI-X table. + +If this function returns a negative number, it indicates the device is +not capable of sending MSI-Xs. + +If this function returns a positive number, it indicates the maximum +number of MSI-X interrupt vectors that could be allocated. + 4.4 Handling devices implementing both MSI and MSI-X capabilities If a device implements both MSI and MSI-X capabilities, it can run in either MSI mode or MSI-X mode, but not both simultaneously. This is a requirement of the PCI spec, and it is enforced by the -PCI layer. Calling pci_enable_msi() when MSI-X is already enabled or -pci_enable_msix() when MSI is already enabled results in an error. -If a device driver wishes to switch between MSI and MSI-X at runtime, -it must first quiesce the device, then switch it back to pin-interrupt -mode, before calling pci_enable_msi() or pci_enable_msix() and resuming -operation. This is not expected to be a common operation but may be -useful for debugging or testing during development. +PCI layer. Calling pci_enable_msi_range() when MSI-X is already +enabled or pci_enable_msix_range() when MSI is already enabled +results in an error. If a device driver wishes to switch between MSI +and MSI-X at runtime, it must first quiesce the device, then switch +it back to pin-interrupt mode, before calling pci_enable_msi_range() +or pci_enable_msix_range() and resuming operation. This is not expected +to be a common operation but may be useful for debugging or testing +during development. 4.5 Considerations when using MSIs @@ -381,5 +493,5 @@ or disabled (0). If 0 is found in any of the msi_bus files belonging to bridges between the PCI root and the device, MSIs are disabled. It is also worth checking the device driver to see whether it supports MSIs. -For example, it may contain calls to pci_enable_msi(), pci_enable_msix() or -pci_enable_msi_block(). +For example, it may contain calls to pci_enable_msi_range() or +pci_enable_msix_range(). diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 6f458564d625..9518006f6675 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -123,8 +123,10 @@ initialization with a pointer to a structure describing the driver The ID table is an array of struct pci_device_id entries ending with an -all-zero entry; use of the macro DEFINE_PCI_DEVICE_TABLE is the preferred -method of declaring the table. Each entry consists of: +all-zero entry. Definitions with static const are generally preferred. +Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided. + +Each entry consists of: vendor,device Vendor and device ID to match (or PCI_ANY_ID) diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index f3778f8952da..910870b15acd 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -396,14 +396,14 @@ o Each element of the form "3/3 ..>. 0:7 ^0" represents one rcu_node The output of "cat rcu/rcu_sched/rcu_pending" looks as follows: - 0!np=26111 qsp=29 rpq=5386 cbr=1 cng=570 gpc=3674 gps=577 nn=15903 - 1!np=28913 qsp=35 rpq=6097 cbr=1 cng=448 gpc=3700 gps=554 nn=18113 - 2!np=32740 qsp=37 rpq=6202 cbr=0 cng=476 gpc=4627 gps=546 nn=20889 - 3 np=23679 qsp=22 rpq=5044 cbr=1 cng=415 gpc=3403 gps=347 nn=14469 - 4!np=30714 qsp=4 rpq=5574 cbr=0 cng=528 gpc=3931 gps=639 nn=20042 - 5 np=28910 qsp=2 rpq=5246 cbr=0 cng=428 gpc=4105 gps=709 nn=18422 - 6!np=38648 qsp=5 rpq=7076 cbr=0 cng=840 gpc=4072 gps=961 nn=25699 - 7 np=37275 qsp=2 rpq=6873 cbr=0 cng=868 gpc=3416 gps=971 nn=25147 + 0!np=26111 qsp=29 rpq=5386 cbr=1 cng=570 gpc=3674 gps=577 nn=15903 ndw=0 + 1!np=28913 qsp=35 rpq=6097 cbr=1 cng=448 gpc=3700 gps=554 nn=18113 ndw=0 + 2!np=32740 qsp=37 rpq=6202 cbr=0 cng=476 gpc=4627 gps=546 nn=20889 ndw=0 + 3 np=23679 qsp=22 rpq=5044 cbr=1 cng=415 gpc=3403 gps=347 nn=14469 ndw=0 + 4!np=30714 qsp=4 rpq=5574 cbr=0 cng=528 gpc=3931 gps=639 nn=20042 ndw=0 + 5 np=28910 qsp=2 rpq=5246 cbr=0 cng=428 gpc=4105 gps=709 nn=18422 ndw=0 + 6!np=38648 qsp=5 rpq=7076 cbr=0 cng=840 gpc=4072 gps=961 nn=25699 ndw=0 + 7 np=37275 qsp=2 rpq=6873 cbr=0 cng=868 gpc=3416 gps=971 nn=25147 ndw=0 The fields are as follows: @@ -432,6 +432,10 @@ o "gpc" is the number of times that an old grace period had o "gps" is the number of times that a new grace period had started, but this CPU was not yet aware of it. +o "ndw" is the number of times that a wakeup of an rcuo + callback-offload kthread had to be deferred in order to avoid + deadlock. + o "nn" is the number of times that this CPU needed nothing. @@ -443,7 +447,7 @@ The output of "cat rcu/rcuboost" looks as follows: balk: nt=0 egt=6541 bt=0 nb=0 ny=126 nos=0 This information is output only for rcu_preempt. Each two-line entry -corresponds to a leaf rcu_node strcuture. The fields are as follows: +corresponds to a leaf rcu_node structure. The fields are as follows: o "n:m" is the CPU-number range for the corresponding two-line entry. In the sample output above, the first entry covers diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index a58b63da1a36..f51861bcb07b 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -45,11 +45,22 @@ directory apei/einj. The following files are provided. injection. Before this, please specify all necessary error parameters. +- flags + Present for kernel version 3.13 and above. Used to specify which + of param{1..4} are valid and should be used by BIOS during injection. + Value is a bitmask as specified in ACPI5.0 spec for the + SET_ERROR_TYPE_WITH_ADDRESS data structure: + Bit 0 - Processor APIC field valid (see param3 below) + Bit 1 - Memory address and mask valid (param1 and param2) + Bit 2 - PCIe (seg,bus,dev,fn) valid (param4 below) + If set to zero, legacy behaviour is used where the type of injection + specifies just one bit set, and param1 is multiplexed. + - param1 This file is used to set the first error parameter value. Effect of parameter depends on error_type specified. For example, if error type is memory related type, the param1 should be a valid physical - memory address. + memory address. [Unless "flag" is set - see above] - param2 This file is used to set the second error parameter value. Effect of @@ -58,6 +69,12 @@ directory apei/einj. The following files are provided. address mask. Linux requires page or narrower granularity, say, 0xfffffffffffff000. +- param3 + Used when the 0x1 bit is set in "flag" to specify the APIC id + +- param4 + Used when the 0x4 bit is set in "flag" to specify target PCIe device + - notrigger The EINJ mechanism is a two step process. First inject the error, then perform some actions to trigger it. Setting "notrigger" to 1 skips the diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index b994bcb32b92..2a1519b87177 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -293,36 +293,13 @@ the device to the driver. For example: These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux -we need to translate them to the Linux GPIO numbers. +we need to translate them to the corresponding Linux GPIO descriptors. -In a simple case of just getting the Linux GPIO number from device -resources one can use acpi_get_gpio_by_index() helper function. It takes -pointer to the device and index of the GpioIo/GpioInt descriptor in the -device resources list. For example: +There is a standard GPIO API for that and is documented in +Documentation/gpio.txt. - int gpio_irq, gpio_power; - int ret; - - gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL); - if (gpio_irq < 0) - /* handle error */ - - gpio_power = acpi_get_gpio_by_index(dev, 0, NULL); - if (gpio_power < 0) - /* handle error */ - - /* Now we can use the GPIO numbers */ - -Other GpioIo parameters must be converted first by the driver to be -suitable to the gpiolib before passing them. - -In case of GpioInt resource an additional call to gpio_to_irq() must be -done before calling request_irq(). - -Note that the above API is ACPI specific and not recommended for drivers -that need to support non-ACPI systems. The recommended way is to use -the descriptor based GPIO interfaces. The above example looks like this -when converted to the GPIO desc: +In the above example we can get the corresponding two GPIO descriptors with +a code like this: #include <linux/gpio/consumer.h> ... @@ -339,4 +316,5 @@ when converted to the GPIO desc: /* Now we can use the GPIO descriptors */ -See also Documentation/gpio.txt. +There are also devm_* versions of these functions which release the +descriptors once the device is released. diff --git a/Documentation/acpi/namespace.txt b/Documentation/acpi/namespace.txt index 260f6a3661fa..1860cb3865c6 100644 --- a/Documentation/acpi/namespace.txt +++ b/Documentation/acpi/namespace.txt @@ -235,10 +235,6 @@ Wysocki <rafael.j.wysocki@intel.com>. named object's type in the second column). In that case the object's directory in sysfs will contain the 'path' attribute whose value is the full path to the node from the namespace root. - struct acpi_device objects are created for the ACPI namespace nodes - whose _STA control methods return PRESENT or FUNCTIONING. The power - resource nodes or nodes without _STA are assumed to be both PRESENT - and FUNCTIONING. F: The struct acpi_device object is created for a fixed hardware feature (as indicated by the fixed feature flag's name in the second @@ -340,7 +336,7 @@ Wysocki <rafael.j.wysocki@intel.com>. | +-------------+-------+----------------+ | | | | +- - - - - - - +- - - - - - +- - - - - - - -+ - | +-| * PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: | + | +-| PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: | | | +- - - - - - - +- - - - - - +- - - - - - - -+ | | | | +------------+------------+-----------------------+ @@ -390,6 +386,3 @@ Wysocki <rafael.j.wysocki@intel.com>. attribute (as described earlier in this document). NOTE: N/A indicates the device object does not have the 'path' or the 'modalias' attribute. - NOTE: The PNP0C0D device listed above is highlighted (marked by "*") - to indicate it will be created only when its _STA methods return - PRESENT or FUNCTIONING. diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index da0151db9964..5a930c1528ad 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -211,6 +211,30 @@ MMP/MMP2 family (communication processor) Linux kernel mach directory: arch/arm/mach-mmp Linux kernel plat directory: arch/arm/plat-pxa +Berlin family (Digital Entertainment) +------------------------------------- + + Flavors: + 88DE3005, Armada 1500-mini + Design name: BG2CD + Core: ARM Cortex-A9, PL310 L2CC + Homepage: http://www.marvell.com/digital-entertainment/armada-1500-mini/ + 88DE3100, Armada 1500 + Design name: BG2 + Core: Marvell PJ4B (ARMv7), Tauros3 L2CC + Homepage: http://www.marvell.com/digital-entertainment/armada-1500/ + Product Brief: http://www.marvell.com/digital-entertainment/armada-1500/assets/Marvell-ARMADA-1500-Product-Brief.pdf + 88DE???? + Design name: BG3 + Core: ARM Cortex-A15, CA15 integrated L2CC + + Homepage: http://www.marvell.com/digital-entertainment/ + Directory: arch/arm/mach-berlin + + Comments: + * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs + with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...). + Long-term plans --------------- diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 8b46c79679c4..0ebd7e2244d0 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -85,21 +85,10 @@ between the calls. Headers ------- - See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list + See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list of GPIO pins, and the configuration values for them. This is included by using #include <mach/regs-gpio.h> - The GPIO management functions are defined in the hardware - header arch/arm/mach-s3c2410/include/mach/hardware.h which can be - included by #include <mach/hardware.h> - - A useful amount of documentation can be found in the hardware - header on how the GPIO functions (and others) work. - - Whilst a number of these functions do make some checks on what - is passed to them, for speed of use, they may not always ensure - that the user supplied data to them is correct. - PIN Numbers ----------- diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt index fa72e97dd669..fe2ef978d85a 100644 --- a/Documentation/blockdev/ramdisk.txt +++ b/Documentation/blockdev/ramdisk.txt @@ -36,21 +36,30 @@ allowing one to squeeze more programs onto an average installation or rescue floppy disk. -2) Kernel Command Line Parameters +2) Parameters --------------------------------- +2a) Kernel Command Line Parameters + ramdisk_size=N ============== This parameter tells the RAM disk driver to set up RAM disks of N k size. The -default is 4096 (4 MB) (8192 (8 MB) on S390). +default is 4096 (4 MB). + +2b) Module parameters - ramdisk_blocksize=N - =================== + rd_nr + ===== + /dev/ramX devices created. -This parameter tells the RAM disk driver how many bytes to use per block. The -default is 1024 (BLOCK_SIZE). + max_part + ======== + Maximum partition number. + rd_size + ======= + See ramdisk_size. 3) Using "rdev -r" ------------------ diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 638bf17ff869..821de56d1580 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -24,7 +24,6 @@ CONTENTS: 2.1 Basic Usage 2.2 Attaching processes 2.3 Mounting hierarchies by name - 2.4 Notification API 3. Kernel API 3.1 Overview 3.2 Synchronization @@ -472,25 +471,6 @@ you give a subsystem a name. The name of the subsystem appears as part of the hierarchy description in /proc/mounts and /proc/<pid>/cgroups. -2.4 Notification API --------------------- - -There is mechanism which allows to get notifications about changing -status of a cgroup. - -To register a new notification handler you need to: - - create a file descriptor for event notification using eventfd(2); - - open a control file to be monitored (e.g. memory.usage_in_bytes); - - write "<event_fd> <control_fd> <args>" to cgroup.event_control. - Interpretation of args is defined by control file implementation; - -eventfd will be woken up by control file implementation or when the -cgroup is removed. - -To unregister a notification handler just close eventfd. - -NOTE: Support of notifications should be implemented for the control -file. See documentation for the subsystem. 3. Kernel API ============= diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index e2bc132608fd..2622115276aa 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -577,7 +577,7 @@ Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable" per-node page counts including "hierarchical_<counter>" which sums up all hierarchical children's values in addition to the memcg's own value. -The ouput format of memory.numa_stat is: +The output format of memory.numa_stat is: total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ... file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ... @@ -670,7 +670,7 @@ page tables. 8.1 Interface -This feature is disabled by default. It can be enabledi (and disabled again) by +This feature is disabled by default. It can be enabled (and disabled again) by writing to memory.move_charge_at_immigrate of the destination cgroup. If you want to enable it: diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt index c4d99ed0b418..52e1da16a309 100644 --- a/Documentation/cgroups/resource_counter.txt +++ b/Documentation/cgroups/resource_counter.txt @@ -97,8 +97,8 @@ to work with it. (struct res_counter *rc, struct res_counter *top, unsinged long val) - Almost same as res_cunter_uncharge() but propagation of uncharge - stops when rc == top. This is useful when kill a res_coutner in + Almost same as res_counter_uncharge() but propagation of uncharge + stops when rc == top. This is useful when kill a res_counter in child cgroup. 2.1 Other accounting routines diff --git a/Documentation/circular-buffers.txt b/Documentation/circular-buffers.txt index 8117e5bf6065..88951b179262 100644 --- a/Documentation/circular-buffers.txt +++ b/Documentation/circular-buffers.txt @@ -160,6 +160,7 @@ The producer will look something like this: spin_lock(&producer_lock); unsigned long head = buffer->head; + /* The spin_unlock() and next spin_lock() provide needed ordering. */ unsigned long tail = ACCESS_ONCE(buffer->tail); if (CIRC_SPACE(head, tail, buffer->size) >= 1) { @@ -168,9 +169,8 @@ The producer will look something like this: produce_item(item); - smp_wmb(); /* commit the item before incrementing the head */ - - buffer->head = (head + 1) & (buffer->size - 1); + smp_store_release(buffer->head, + (head + 1) & (buffer->size - 1)); /* wake_up() will make sure that the head is committed before * waking anyone up */ @@ -183,9 +183,14 @@ This will instruct the CPU that the contents of the new item must be written before the head index makes it available to the consumer and then instructs the CPU that the revised head index must be written before the consumer is woken. -Note that wake_up() doesn't have to be the exact mechanism used, but whatever -is used must guarantee a (write) memory barrier between the update of the head -index and the change of state of the consumer, if a change of state occurs. +Note that wake_up() does not guarantee any sort of barrier unless something +is actually awakened. We therefore cannot rely on it for ordering. However, +there is always one element of the array left empty. Therefore, the +producer must produce two elements before it could possibly corrupt the +element currently being read by the consumer. Therefore, the unlock-lock +pair between consecutive invocations of the consumer provides the necessary +ordering between the read of the index indicating that the consumer has +vacated a given element and the write by the producer to that same element. THE CONSUMER @@ -195,21 +200,20 @@ The consumer will look something like this: spin_lock(&consumer_lock); - unsigned long head = ACCESS_ONCE(buffer->head); + /* Read index before reading contents at that index. */ + unsigned long head = smp_load_acquire(buffer->head); unsigned long tail = buffer->tail; if (CIRC_CNT(head, tail, buffer->size) >= 1) { - /* read index before reading contents at that index */ - smp_read_barrier_depends(); /* extract one item from the buffer */ struct item *item = buffer[tail]; consume_item(item); - smp_mb(); /* finish reading descriptor before incrementing tail */ - - buffer->tail = (tail + 1) & (buffer->size - 1); + /* Finish reading descriptor before incrementing tail. */ + smp_store_release(buffer->tail, + (tail + 1) & (buffer->size - 1)); } spin_unlock(&consumer_lock); @@ -218,12 +222,17 @@ This will instruct the CPU to make sure the index is up to date before reading the new item, and then it shall make sure the CPU has finished reading the item before it writes the new tail pointer, which will erase the item. - -Note the use of ACCESS_ONCE() in both algorithms to read the opposition index. -This prevents the compiler from discarding and reloading its cached value - -which some compilers will do across smp_read_barrier_depends(). This isn't -strictly needed if you can be sure that the opposition index will _only_ be -used the once. +Note the use of ACCESS_ONCE() and smp_load_acquire() to read the +opposition index. This prevents the compiler from discarding and +reloading its cached value - which some compilers will do across +smp_read_barrier_depends(). This isn't strictly needed if you can +be sure that the opposition index will _only_ be used the once. +The smp_load_acquire() additionally forces the CPU to order against +subsequent memory references. Similarly, smp_store_release() is used +in both algorithms to write the thread's index. This documents the +fact that we are writing to something that can be read concurrently, +prevents the compiler from tearing the store, and enforces ordering +against previous accesses. =============== diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 3aeb5c440442..699ef2a323b1 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -77,6 +77,11 @@ the operations defined in clk.h: int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, unsigned long); + int (*set_rate_and_parent)(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, u8 index); + unsigned long (*recalc_accuracy)(struct clk_hw *hw, + unsigned long parent_accuracy); void (*init)(struct clk_hw *hw); }; @@ -202,6 +207,8 @@ optional or must be evaluated on a case-by-case basis. .set_parent | | | n | y | n | .get_parent | | | n | y | n | | | | | | | +.recalc_accuracy| | | | | | + | | | | | | .init | | | | | | ----------------------------------------------------------- [1] either one of round_rate or determine_rate is required. diff --git a/Documentation/cpu-freq/boost.txt b/Documentation/cpu-freq/boost.txt index 9b4edfcf486f..dd62e1334f0a 100644 --- a/Documentation/cpu-freq/boost.txt +++ b/Documentation/cpu-freq/boost.txt @@ -17,8 +17,8 @@ Introduction Some CPUs support a functionality to raise the operating frequency of some cores in a multi-core package if certain conditions apply, mostly if the whole chip is not fully utilized and below it's intended thermal -budget. This is done without operating system control by a combination -of hardware and firmware. +budget. The decision about boost disable/enable is made either at hardware +(e.g. x86) or software (e.g ARM). On Intel CPUs this is called "Turbo Boost", AMD calls it "Turbo-Core", in technical documentation "Core performance boost". In Linux we use the term "boost" for convenience. @@ -48,24 +48,24 @@ be desirable: User controlled switch ---------------------- -To allow the user to toggle the boosting functionality, the acpi-cpufreq -driver exports a sysfs knob to disable it. There is a file: +To allow the user to toggle the boosting functionality, the cpufreq core +driver exports a sysfs knob to enable or disable it. There is a file: /sys/devices/system/cpu/cpufreq/boost which can either read "0" (boosting disabled) or "1" (boosting enabled). -Reading the file is always supported, even if the processor does not -support boosting. In this case the file will be read-only and always -reads as "0". Explicitly changing the permissions and writing to that -file anyway will return EINVAL. +The file is exported only when cpufreq driver supports boosting. +Explicitly changing the permissions and writing to that file anyway will +return EINVAL. On supported CPUs one can write either a "0" or a "1" into this file. This will either disable the boost functionality on all cores in the -whole system (0) or will allow the hardware to boost at will (1). +whole system (0) or will allow the software or hardware to boost at will +(1). Writing a "1" does not explicitly boost the system, but just allows the -CPU (and the firmware) to boost at their discretion. Some implementations -take external factors like the chip's temperature into account, so -boosting once does not necessarily mean that it will occur every time -even using the exact same software setup. +CPU to boost at their discretion. Some implementations take external +factors like the chip's temperature into account, so boosting once does +not necessarily mean that it will occur every time even using the exact +same software setup. AMD legacy cpb switch diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt new file mode 100644 index 000000000000..e742d21dbd96 --- /dev/null +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -0,0 +1,40 @@ +Intel P-state driver +-------------------- + +This driver implements a scaling driver with an internal governor for +Intel Core processors. The driver follows the same model as the +Transmeta scaling driver (longrun.c) and implements the setpolicy() +instead of target(). Scaling drivers that implement setpolicy() are +assumed to implement internal governors by the cpufreq core. All the +logic for selecting the current P state is contained within the +driver; no external governor is used by the cpufreq core. + +Intel SandyBridge+ processors are supported. + +New sysfs files for controlling P state selection have been added to +/sys/devices/system/cpu/intel_pstate/ + + max_perf_pct: limits the maximum P state that will be requested by + the driver stated as a percentage of the available performance. + + min_perf_pct: limits the minimum P state that will be requested by + the driver stated as a percentage of the available performance. + + no_turbo: limits the driver to selecting P states below the turbo + frequency range. + +For contemporary Intel processors, the frequency is controlled by the +processor itself and the P-states exposed to software are related to +performance levels. The idea that frequency can be set to a single +frequency is fiction for Intel Core processors. Even if the scaling +driver selects a single P state the actual frequency the processor +will run at is selected by the processor itself. + +New debugfs files have also been added to /sys/kernel/debug/pstate_snb/ + + deadband + d_gain_pct + i_gain_pct + p_gain_pct + sample_rate_ms + setpoint diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 8cb9938cc47e..be675d2d15a7 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications. return NOTIFY_OK; } - static struct notifier_block foobar_cpu_notifer = + static struct notifier_block foobar_cpu_notifier = { .notifier_call = foobar_cpu_callback, }; diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt index df52a849957f..66c2774c0c64 100644 --- a/Documentation/device-mapper/cache-policies.txt +++ b/Documentation/device-mapper/cache-policies.txt @@ -40,8 +40,11 @@ on hit count on entry. The policy aims to take different cache miss costs into account and to adjust to varying load patterns automatically. Message and constructor argument pairs are: - 'sequential_threshold <#nr_sequential_ios>' and - 'random_threshold <#nr_random_ios>'. + 'sequential_threshold <#nr_sequential_ios>' + 'random_threshold <#nr_random_ios>' + 'read_promote_adjustment <value>' + 'write_promote_adjustment <value>' + 'discard_promote_adjustment <value>' The sequential threshold indicates the number of contiguous I/Os required before a stream is treated as sequential. The random threshold @@ -55,6 +58,15 @@ since spindles tend to have good bandwidth. The io_tracker counts contiguous I/Os to try to spot when the io is in one of these sequential modes. +Internally the mq policy maintains a promotion threshold variable. If +the hit count of a block not in the cache goes above this threshold it +gets promoted to the cache. The read, write and discard promote adjustment +tunables allow you to tweak the promotion threshold by adding a small +value based on the io type. They default to 4, 8 and 1 respectively. +If you're trying to quickly warm a new cache device you may wish to +reduce these to encourage promotion. Remember to switch them back to +their defaults after the cache fills though. + cleaner ------- diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 719320b5ed3f..e6b72d355151 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -217,36 +217,43 @@ the characteristics of a specific policy, always request it by name. Status ------ -<#used metadata blocks>/<#total metadata blocks> <#read hits> <#read misses> -<#write hits> <#write misses> <#demotions> <#promotions> <#blocks in cache> -<#dirty> <#features> <features>* <#core args> <core args>* <#policy args> -<policy args>* - -#used metadata blocks : Number of metadata blocks used -#total metadata blocks : Total number of metadata blocks -#read hits : Number of times a READ bio has been mapped +<metadata block size> <#used metadata blocks>/<#total metadata blocks> +<cache block size> <#used cache blocks>/<#total cache blocks> +<#read hits> <#read misses> <#write hits> <#write misses> +<#demotions> <#promotions> <#dirty> <#features> <features>* +<#core args> <core args>* <policy name> <#policy args> <policy args>* + +metadata block size : Fixed block size for each metadata block in + sectors +#used metadata blocks : Number of metadata blocks used +#total metadata blocks : Total number of metadata blocks +cache block size : Configurable block size for the cache device + in sectors +#used cache blocks : Number of blocks resident in the cache +#total cache blocks : Total number of cache blocks +#read hits : Number of times a READ bio has been mapped to the cache -#read misses : Number of times a READ bio has been mapped +#read misses : Number of times a READ bio has been mapped to the origin -#write hits : Number of times a WRITE bio has been mapped +#write hits : Number of times a WRITE bio has been mapped to the cache -#write misses : Number of times a WRITE bio has been +#write misses : Number of times a WRITE bio has been mapped to the origin -#demotions : Number of times a block has been removed +#demotions : Number of times a block has been removed from the cache -#promotions : Number of times a block has been moved to +#promotions : Number of times a block has been moved to the cache -#blocks in cache : Number of blocks resident in the cache -#dirty : Number of blocks in the cache that differ +#dirty : Number of blocks in the cache that differ from the origin -#feature args : Number of feature args to follow -feature args : 'writethrough' (optional) -#core args : Number of core arguments (must be even) -core args : Key/value pairs for tuning the core +#feature args : Number of feature args to follow +feature args : 'writethrough' (optional) +#core args : Number of core arguments (must be even) +core args : Key/value pairs for tuning the core e.g. migration_threshold -#policy args : Number of policy arguments to follow (must be even) -policy args : Key/value pairs - e.g. 'sequential_threshold 1024 +policy name : Name of the policy +#policy args : Number of policy arguments to follow (must be even) +policy args : Key/value pairs + e.g. sequential_threshold Messages -------- diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index 50c44cf79b0e..8a7a3d46e0da 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -235,6 +235,8 @@ i) Constructor read_only: Don't allow any changes to be made to the pool metadata. + error_if_no_space: Error IOs, instead of queueing, if no space. + Data block size must be between 64KB (128 sectors) and 1GB (2097152 sectors) inclusive. @@ -276,6 +278,11 @@ ii) Status contain the string 'Fail'. The userspace recovery tools should then be used. + error_if_no_space|queue_if_no_space + If the pool runs out of data or metadata space, the pool will + either queue or error the IO destined to the data device. The + default is to queue the IO until more space is added. + iii) Messages create_thin <dev id> diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 5fac246a9530..3509707f9320 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -14,6 +14,9 @@ Required nodes: - core-module: the root node to the Integrator platforms must have a core-module with regs and the compatible string "arm,core-module-integrator" +- external-bus-interface: the root node to the Integrator platforms + must have an external bus interface with regs and the + compatible-string "arm,external-bus-interface" Required properties for the core module: - regs: the location and size of the core module registers, one @@ -48,6 +51,11 @@ Required nodes: reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index ad031211b5b8..2742e9cfd6b1 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" + <chip> can be "at91rm9200" or "sama5d3" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 1196290082d1..16f60b41c147 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -20,6 +20,10 @@ TC/TCLIB Timer required properties: - interrupts: Should contain all interrupts for the TC block Note that you can specify several interrupt cells if the TC block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. Examples: @@ -28,6 +32,8 @@ One interrupt per TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 4>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; One interrupt per TC channel in a TC block: @@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; interrupts = <26 4 27 4 28 4>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; }; RSTC Reset Controller required properties: @@ -50,7 +58,8 @@ Example: }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91sam9260-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", + "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", - reg: Should contain registers location and length For at91sam9263 and at91sam9g45 you must specify 2 entries. diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt new file mode 100644 index 000000000000..780d0392a66b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt @@ -0,0 +1,20 @@ +Trusted Foundations +------------------- + +Boards that use the Trusted Foundations secure monitor can signal its +presence by declaring a node compatible with "tlm,trusted-foundations" +under the /firmware/ node + +Required properties: +- compatible: "tlm,trusted-foundations" +- tlm,version-major: major version number of Trusted Foundations firmware +- tlm,version-minor: minor version number of Trusted Foundations firmware + +Example: + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt new file mode 100644 index 000000000000..8c7a4653508d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -0,0 +1,32 @@ +Hisilicon Platforms Device Tree Bindings +---------------------------------------------------- + +Hi4511 Board +Required root node properties: + - compatible = "hisilicon,hi3620-hi4511"; + +Hisilicon system controller + +Required properties: +- compatible : "hisilicon,sysctrl" +- reg : Register address and size + +Optional properties: +- smp-offset : offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go +- resume-offset : offset in sysctrl for notifying cpu0 when resume +- reboot-offset : offset in sysctrl for system reboot + +Example: + + /* for Hi3620 */ + sysctrl: system-controller@fc802000 { + compatible = "hisilicon,sysctrl"; + reg = <0xfc802000 0x1000>; + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index c0c7626fd0ff..b513cb8196fe 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -7,20 +7,21 @@ The ARM L2 cache representation in the device tree should be done as follows: Required properties: - compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "marvell,aurora-system-cache": Marvell Controller designed to be + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller + "marvell,aurora-system-cache": Marvell Controller designed to be compatible with the ARM one, with system cache mode (meaning maintenance operations on L1 are broadcasted to the L2 and L2 performs the same operation). - "marvell,"aurora-outer-cache: Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by - "brcm,bcm11351-a2-pl310-cache" + "marvell,aurora-outer-cache": Marvell Controller designed to be + compatible with the ARM one with outer cache mode. + "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible + with arm,pl310-cache controller. - cache-unified : Specifies the cache is a unified cache. - cache-level : Should be set to 2 for a level 2 cache. - reg : Physical base address and size of cache controller's memory mapped diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt new file mode 100644 index 000000000000..737afa5f8148 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -0,0 +1,24 @@ +Marvell Berlin SoC Family Device Tree Bindings +--------------------------------------------------------------- + +Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 +shall have the following properties: + +* Required root node properties: +compatible: must contain "marvell,berlin" + +In addition, the above compatible shall be extended with the specific +SoC and board used. Currently known SoC compatibles are: + "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), + "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) + "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) + "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) + +* Example: + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; + + ... +} diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 000000000000..11087edb0658 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 808c1543b0f8..34dc40cffdfd 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -31,6 +31,59 @@ spinlock@1 { ti,hwmods = "spinlock"; }; +SoC Type (optional): + +- General Purpose devices + compatible = "ti,gp" +- High Security devices + compatible = "ti,hs" + +SoC Families: + +- OMAP2 generic - defaults to OMAP2420 + compatible = "ti,omap2" +- OMAP3 generic - defaults to OMAP3430 + compatible = "ti,omap3" +- OMAP4 generic - defaults to OMAP4430 + compatible = "ti,omap4" +- OMAP5 generic - defaults to OMAP5430 + compatible = "ti,omap5" +- DRA7 generic - defaults to DRA742 + compatible = "ti,dra7" +- AM43x generic - defaults to AM4372 + compatible = "ti,am43" + +SoCs: + +- OMAP2420 + compatible = "ti,omap2420", "ti,omap2" +- OMAP2430 + compatible = "ti,omap2430", "ti,omap2" + +- OMAP3430 + compatible = "ti,omap3430", "ti,omap3" +- AM3517 + compatible = "ti,am3517", "ti,omap3" +- OMAP3630 + compatible = "ti,omap36xx", "ti,omap3" +- AM33xx + compatible = "ti,am33xx", "ti,omap3" + +- OMAP4430 + compatible = "ti,omap4430", "ti,omap4" +- OMAP4460 + compatible = "ti,omap4460", "ti,omap4" + +- OMAP5430 + compatible = "ti,omap5430", "ti,omap5" +- OMAP5432 + compatible = "ti,omap5432", "ti,omap5" + +- DRA742 + compatible = "ti,dra7xx", "ti,dra7" + +- AM4372 + compatible = "ti,am4372", "ti,am43" Boards: diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 5039c0a12f55..0ab3251a6ec2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,7 +1,12 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - name : should be 'sysreg'; - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; - reg : offset and length of the register set. + +Example: + syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index ed9c85334436..558ed4b4ef39 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -32,3 +32,8 @@ board-specific compatible values: nvidia,whistler toradex,colibri_t20-512 toradex,iris + +Trusted Foundations +------------------------------------------- +Tegra supports the Trusted Foundation secure monitor. See the +"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 1608a54e90e1..68ac65f82a1c 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -9,6 +9,7 @@ Required properties: - compatible : Should contain "nvidia,tegra<chip>-pmc". - reg : Offset and length of the register set for the device - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: "pclk" (The Tegra clock of that name), "clk32k_in" (The 32KHz clock input to Tegra). diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt index 9989eda755d9..c9cf605bb995 100644 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -29,3 +29,8 @@ pic: pic@14000000 { clear-mask = <0xffffffff>; valid-mask = <0x003fffff>; }; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt index b5cdd20cde9c..1c8351604d38 100644 --- a/Documentation/devicetree/bindings/ata/marvell.txt +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -1,7 +1,7 @@ * Marvell Orion SATA Required Properties: -- compatibility : "marvell,orion-sata" +- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata" - reg : Address range of controller - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use. diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt new file mode 100644 index 000000000000..1e6111333fa8 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -0,0 +1,18 @@ +* Renesas R-Car SATA + +Required properties: +- compatible : should contain one of the following: + - "renesas,sata-r8a7779" for R-Car H1 + - "renesas,sata-r8a7790" for R-Car H2 + - "renesas,sata-r8a7791" for R-Car M2 +- reg : address and length of the SATA registers; +- interrupts : must consist of one interrupt specifier. + +Example: + +sata: sata@fc600000 { + compatible = "renesas,sata-r8a7779"; + reg = <0xfc600000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt new file mode 100644 index 000000000000..cd5e23912888 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -0,0 +1,339 @@ +Device Tree Clock bindings for arch-at91 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "atmel,at91rm9200-pmc" or + "atmel,at91sam9g45-pmc" or + "atmel,at91sam9n12-pmc" or + "atmel,at91sam9x5-pmc" or + "atmel,sama5d3-pmc": + at91 PMC (Power Management Controller) + All at91 specific clocks (clocks defined below) must be child + node of the PMC node. + + "atmel,at91rm9200-clk-main": + at91 main oscillator + + "atmel,at91rm9200-clk-master" or + "atmel,at91sam9x5-clk-master": + at91 master clock + + "atmel,at91sam9x5-clk-peripheral" or + "atmel,at91rm9200-clk-peripheral": + at91 peripheral clocks + + "atmel,at91rm9200-clk-pll" or + "atmel,at91sam9g45-clk-pll" or + "atmel,at91sam9g20-clk-pllb" or + "atmel,sama5d3-clk-pll": + at91 pll clocks + + "atmel,at91sam9x5-clk-plldiv": + at91 plla divisor + + "atmel,at91rm9200-clk-programmable" or + "atmel,at91sam9g45-clk-programmable" or + "atmel,at91sam9x5-clk-programmable": + at91 programmable clocks + + "atmel,at91sam9x5-clk-smd": + at91 SMD (Soft Modem) clock + + "atmel,at91rm9200-clk-system": + at91 system clocks + + "atmel,at91rm9200-clk-usb" or + "atmel,at91sam9x5-clk-usb" or + "atmel,at91sam9n12-clk-usb": + at91 usb clock + + "atmel,at91sam9x5-clk-utmi": + at91 utmi clock + +Required properties for PMC node: +- reg : defines the IO memory reserved for the PMC. +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- interrupts : shall be set to PMC interrupt line. +- interrupt-controller : tell that the PMC is an interrupt controller. +- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, + and reflect the bit position in the PMC_ER/DR/SR registers. + You can use the dt macros defined in dt-bindings/clk/at91.h. + 0 (AT91_PMC_MOSCS) -> main oscillator ready + 1 (AT91_PMC_LOCKA) -> PLL A ready + 2 (AT91_PMC_LOCKB) -> PLL B ready + 3 (AT91_PMC_MCKRDY) -> master clock ready + 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready + 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready + 16 (AT91_PMC_MOSCSELS) -> main oscillator selected + 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized + 18 (AT91_PMC_CFDEV) -> clock failure detected + +For example: + pmc: pmc@fffffc00 { + compatible = "atmel,sama5d3-pmc"; + interrupts = <1 4 7>; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #address-cells = <1>; + + /* put at91 clocks here */ + }; + +Required properties for main clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<0>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks (optional if clock-frequency is provided) : shall be the slow clock + phandle. This clock is used to calculate the main clock rate if + "clock-frequency" is not provided. +- clock-frequency : the main oscillator frequency.Prefer the use of + "clock-frequency" over automatic clock rate calculation. + +For example: + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + interrupt-parent = <&pmc>; + interrupts = <0>; + #clock-cells = <0>; + clocks = <&ck32k>; + clock-frequency = <18432000>; + }; + +Required properties for master clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<3>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the master clock sources (see atmel datasheet) phandles. + e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>". +- atmel,clk-output-range : minimum and maximum clock frequency (two u32 + fields). + e.g. output = <0 133000000>; <=> 0 to 133MHz. +- atmel,clk-divisors : master clock divisors table (four u32 fields). + 0 <=> reserved value. + e.g. divisors = <1 2 4 6>; +- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the + PRES field as CLOCK_DIV3 (e.g sam9x5). + +For example: + mck: mck { + compatible = "atmel,at91rm9200-clk-master"; + interrupt-parent = <&pmc>; + interrupts = <3>; + #clock-cells = <0>; + atmel,clk-output-range = <0 133000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + +Required properties for peripheral clocks: +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- clocks : shall be the master clock phandle. + e.g. clocks = <&mck>; +- name: device tree node describing a specific system clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg: peripheral id. See Atmel's datasheets to get a full + list of peripheral ids. + * atmel,clk-output-range : minimum and maximum clock frequency + (two u32 fields). Only valid on at91sam9x5-clk-peripheral + compatible IPs. + +For example: + periph: periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #size-cells = <0>; + #address-cells = <1>; + clocks = <&mck>; + + ssc0_clk { + #clock-cells = <0>; + reg = <2>; + atmel,clk-output-range = <0 133000000>; + }; + + usart0_clk { + #clock-cells = <0>; + reg = <3>; + atmel,clk-output-range = <0 66000000>; + }; + }; + + +Required properties for pll clocks: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<1>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the main clock phandle. +- reg : pll id. + 0 -> PLL A + 1 -> PLL B +- atmel,clk-input-range : minimum and maximum source clock frequency (two u32 + fields). + e.g. input = <1 32000000>; <=> 1 to 32MHz. +- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output + range description. Sould be set to 2, 3 + or 4. + * 1st and 2nd cells represent the frequency range (min-max). + * 3rd cell is optional and represents the OUT field value for the given + range. + * 4th cell is optional and represents the ICPLL field (PLLICPR + register) +- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter + depending on #atmel,pll-output-range-cells + property value. + +For example: + plla: pllack { + compatible = "atmel,at91sam9g45-clk-pll"; + interrupt-parent = <&pmc>; + interrupts = <1>; + #clock-cells = <0>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <74500000 800000000 0 0 + 69500000 750000000 1 0 + 64500000 700000000 2 0 + 59500000 650000000 3 0 + 54500000 600000000 0 1 + 49500000 550000000 1 1 + 44500000 500000000 2 1 + 40000000 450000000 3 1>; + }; + +Required properties for plldiv clocks (plldiv = pll / 2): +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the plla clock phandle. + +The pll divisor is equal to 2 and cannot be changed. + +For example: + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + +Required properties for programmable clocks: +- interrupt-parent : must reference the PMC node. +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- clocks : shall be the programmable clock source phandles. + e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; +- name: device tree node describing a specific prog clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg : programmable clock id (register offset from PCKx + register). + * interrupts : shall be set to "<(8 + id)>". + +For example: + prog: progck { + compatible = "atmel,at91sam9g45-clk-programmable"; + #size-cells = <0>; + #address-cells = <1>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <8>; + }; + + prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <9>; + }; + }; + + +Required properties for smd clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the smd clock source phandles. + e.g. clocks = <&plladiv>, <&utmi>; + +For example: + smd: smdck { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + +Required properties for system clocks: +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- name: device tree node describing a specific system clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg: system clock id (bit position in SCER/SCDR/SCSR registers). + See Atmel's datasheet to get a full list of system clock ids. + +For example: + system: systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + }; + + +Required properties for usb clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the smd clock source phandles. + e.g. clocks = <&pllb>; +- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"): + usb clock divisor table. + e.g. divisors = <1 2 4 0>; + +For example: + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + atmel,clk-divisors = <1 2 4 0>; + }; + + +Required properties for utmi clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the main clock source phandle. + +For example: + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <0>; + clocks = <&main>; + }; diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 75e2e1999f87..180e8835569e 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -8,12 +8,29 @@ Required Properties: - compatible: should be one of the following: - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. - - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs. - + - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250 + SoCs. + - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420 + SoCs. - reg: physical base address and length of the controller's register set. - #clock-cells: should be 1. +- clocks: + - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" + is used if not specified. + - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" + is used if not specified. + - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if + not specified. + - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not + specified. + +- clock-names: Aliases for the above clocks. They should be "pll_ref", + "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular @@ -34,16 +51,30 @@ i2s_bus 6 sclk_i2s 7 pcm_bus 8 sclk_pcm 9 +adma 10 Exynos5420 + +Example 1: An example of a clock controller node using the default input + clock names is listed below. + +clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; +}; -Example 1: An example of a clock controller node is listed below. +Example 2: An example of a clock controller node with the input clocks + specified. clock_audss: audss-clock-controller@3810000 { compatible = "samsung,exynos5250-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, + <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; }; -Example 2: I2S controller node that consumes the clock generated by the clock +Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt new file mode 100644 index 000000000000..60bbb1a8c69a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt @@ -0,0 +1,98 @@ +Device tree Clock bindings for Renesas EMMA Mobile EV2 + +This binding uses the common clock binding. + +* SMU +System Management Unit described in user's manual R19UH0037EJ1000_SMU. +This is not a clock provider, but clocks under SMU depend on it. + +Required properties: +- compatible: Should be "renesas,emev2-smu" +- reg: Address and Size of SMU registers + +* SMU_CLKDIV +Function block with an input mux and a divider, which corresponds to +"Serial clock generator" in fig."Clock System Overview" of the manual, +and "xxx frequency division setting register" (XXXCLKDIV) registers. +This makes internal (neither input nor output) clock that is provided +to input of xxxGCLK block. + +Required properties: +- compatible: Should be "renesas,emev2-smu-clkdiv" +- reg: Byte offset from SMU base and Bit position in the register +- clocks: Parent clocks. Input clocks as described in clock-bindings.txt +- #clock-cells: Should be <0> + +* SMU_GCLK +Clock gating node shown as "Clock stop processing block" in the +fig."Clock System Overview" of the manual. +Registers are "xxx clock gate control register" (XXXGCLKCTRL). + +Required properties: +- compatible: Should be "renesas,emev2-smu-gclk" +- reg: Byte offset from SMU base and Bit position in the register +- clocks: Input clock as described in clock-bindings.txt +- #clock-cells: Should be <0> + +Example of provider: + +usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>; + #clock-cells = <0>; +}; + +usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; +}; + +Example of consumer: + +uart@e1020000 { + compatible = "renesas,em-uart"; + reg = <0xe1020000 0x38>; + interrupts = <0 8 0>; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; +}; + +Example of clock-tree description: + + This describes a clock path in the clock tree + c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk + +smu@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 46f5c791ea0d..72ce617dea82 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -62,6 +62,7 @@ clock which they consume. div_i2s1 157 div_i2s2 158 sclk_hdmiphy 159 + div_pcm0 160 [Peripheral Clock Gates] @@ -159,6 +160,8 @@ clock which they consume. mixer 343 hdmi 344 g2d 345 + mdma0 346 + smmu_mdma0 347 [Clock Muxes] diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt index 0b1fe7824093..48ea0ad8ad46 100644 --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt @@ -10,6 +10,8 @@ Required properties: - clock-frequency : frequency of clock in Hz. Should be a single cell. Optional properties: +- clock-accuracy : accuracy of clock in ppb (parts per billion). + Should be a single cell. - gpios : From common gpio binding; gpio connection to clock enable pin. - clock-output-names : From common clock binding. @@ -18,4 +20,5 @@ Example: compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000000>; + clock-accuracy = <100>; }; diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt index 5757f9abfc26..1bae8527eb9b 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt @@ -19,6 +19,6 @@ Example: compatible = "fixed-factor-clock"; clocks = <&parentclk>; #clock-cells = <0>; - div = <2>; - mult = <1>; + clock-div = <2>; + clock-mult = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt new file mode 100644 index 000000000000..4b71ab41be53 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt @@ -0,0 +1,19 @@ +* Hisilicon Hi3620 Clock Controller + +The Hi3620 clock controller generates and supplies clock to various +controllers within the Hi3620 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt new file mode 100644 index 000000000000..a70356452a82 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt @@ -0,0 +1,113 @@ +* Clock bindings for Freescale i.MX35 + +Required properties: +- compatible: Should be "fsl,imx35-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX35 +clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + +Examples: + +clks: ccm@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; +}; + +esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index 4c029a8739d3..cadc4d29ada6 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -7,197 +7,8 @@ Required properties: - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX5 -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - ckil 1 - osc 2 - ckih1 3 - ckih2 4 - ahb 5 - ipg 6 - axi_a 7 - axi_b 8 - uart_pred 9 - uart_root 10 - esdhc_a_pred 11 - esdhc_b_pred 12 - esdhc_c_s 13 - esdhc_d_s 14 - emi_sel 15 - emi_slow_podf 16 - nfc_podf 17 - ecspi_pred 18 - ecspi_podf 19 - usboh3_pred 20 - usboh3_podf 21 - usb_phy_pred 22 - usb_phy_podf 23 - cpu_podf 24 - di_pred 25 - tve_s 27 - uart1_ipg_gate 28 - uart1_per_gate 29 - uart2_ipg_gate 30 - uart2_per_gate 31 - uart3_ipg_gate 32 - uart3_per_gate 33 - i2c1_gate 34 - i2c2_gate 35 - gpt_ipg_gate 36 - pwm1_ipg_gate 37 - pwm1_hf_gate 38 - pwm2_ipg_gate 39 - pwm2_hf_gate 40 - gpt_hf_gate 41 - fec_gate 42 - usboh3_per_gate 43 - esdhc1_ipg_gate 44 - esdhc2_ipg_gate 45 - esdhc3_ipg_gate 46 - esdhc4_ipg_gate 47 - ssi1_ipg_gate 48 - ssi2_ipg_gate 49 - ssi3_ipg_gate 50 - ecspi1_ipg_gate 51 - ecspi1_per_gate 52 - ecspi2_ipg_gate 53 - ecspi2_per_gate 54 - cspi_ipg_gate 55 - sdma_gate 56 - emi_slow_gate 57 - ipu_s 58 - ipu_gate 59 - nfc_gate 60 - ipu_di1_gate 61 - vpu_s 62 - vpu_gate 63 - vpu_reference_gate 64 - uart4_ipg_gate 65 - uart4_per_gate 66 - uart5_ipg_gate 67 - uart5_per_gate 68 - tve_gate 69 - tve_pred 70 - esdhc1_per_gate 71 - esdhc2_per_gate 72 - esdhc3_per_gate 73 - esdhc4_per_gate 74 - usb_phy_gate 75 - hsi2c_gate 76 - mipi_hsc1_gate 77 - mipi_hsc2_gate 78 - mipi_esc_gate 79 - mipi_hsp_gate 80 - ldb_di1_div_3_5 81 - ldb_di1_div 82 - ldb_di0_div_3_5 83 - ldb_di0_div 84 - ldb_di1_gate 85 - can2_serial_gate 86 - can2_ipg_gate 87 - i2c3_gate 88 - lp_apm 89 - periph_apm 90 - main_bus 91 - ahb_max 92 - aips_tz1 93 - aips_tz2 94 - tmax1 95 - tmax2 96 - tmax3 97 - spba 98 - uart_sel 99 - esdhc_a_sel 100 - esdhc_b_sel 101 - esdhc_a_podf 102 - esdhc_b_podf 103 - ecspi_sel 104 - usboh3_sel 105 - usb_phy_sel 106 - iim_gate 107 - usboh3_gate 108 - emi_fast_gate 109 - ipu_di0_gate 110 - gpc_dvfs 111 - pll1_sw 112 - pll2_sw 113 - pll3_sw 114 - ipu_di0_sel 115 - ipu_di1_sel 116 - tve_ext_sel 117 - mx51_mipi 118 - pll4_sw 119 - ldb_di1_sel 120 - di_pll4_podf 121 - ldb_di0_sel 122 - ldb_di0_gate 123 - usb_phy1_gate 124 - usb_phy2_gate 125 - per_lp_apm 126 - per_pred1 127 - per_pred2 128 - per_podf 129 - per_root 130 - ssi_apm 131 - ssi1_root_sel 132 - ssi2_root_sel 133 - ssi3_root_sel 134 - ssi_ext1_sel 135 - ssi_ext2_sel 136 - ssi_ext1_com_sel 137 - ssi_ext2_com_sel 138 - ssi1_root_pred 139 - ssi1_root_podf 140 - ssi2_root_pred 141 - ssi2_root_podf 142 - ssi_ext1_pred 143 - ssi_ext1_podf 144 - ssi_ext2_pred 145 - ssi_ext2_podf 146 - ssi1_root_gate 147 - ssi2_root_gate 148 - ssi3_root_gate 149 - ssi_ext1_gate 150 - ssi_ext2_gate 151 - epit1_ipg_gate 152 - epit1_hf_gate 153 - epit2_ipg_gate 154 - epit2_hf_gate 155 - can_sel 156 - can1_serial_gate 157 - can1_ipg_gate 158 - owire_gate 159 - gpu3d_s 160 - gpu2d_s 161 - gpu3d_gate 162 - gpu2d_gate 163 - garb_gate 164 - cko1_sel 165 - cko1_podf 166 - cko1 167 - cko2_sel 168 - cko2_podf 169 - cko2 170 - srtc_gate 171 - pata_gate 172 - sata_gate 173 - spdif_xtal_sel 174 - spdif0_sel 175 - spdif1_sel 176 - spdif0_pred 177 - spdif0_podf 178 - spdif1_pred 179 - spdif1_podf 180 - spdif0_com_sel 181 - spdif1_com_sel 182 - spdif0_gate 183 - spdif1_gate 184 - spdif_ipg_gate 185 - ocram 186 +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h +for the full list of i.MX5 clock IDs. Examples (for mx53): @@ -212,7 +23,7 @@ can1: can@53fc8000 { compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 12bd72605a31..225990f79b7c 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -17,13 +17,14 @@ Required properties: - reg - pll control0 and pll multipler registers - reg-names : control and multiplier. The multiplier is applicable only for main pll clock -- fixed-postdiv : fixed post divider value +- fixed-postdiv : fixed post divider value. If absent, use clkod register bits + for postdiv Example: mainpllclk: mainpllclk@2310110 { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclksys>; reg = <0x02620350 4>, <0x02310110 4>; reg-names = "control", "multiplier"; fixed-postdiv = <2>; @@ -32,11 +33,10 @@ Example: papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkpass>; clock-output-names = "pa-pll-clk"; reg = <0x02620358 4>; reg-names = "control"; - fixed-postdiv = <6>; }; Required properties: diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt new file mode 100644 index 000000000000..96ce71bbd745 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -0,0 +1,38 @@ +Binding for Maxim MAX77686 32k clock generator block + +This is a part of device tree bindings of MAX77686 multi-function device. +More information can be found in bindings/mfd/max77686.txt file. + +The MAX77686 contains three 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. + +Following properties should be presend in main device node of the MFD chip. + +Required properties: +- #clock-cells: simple one-cell clock specifier format is used, where the + only cell is used as an index of the clock inside the provider. Following + indices are allowed: + - 0: 32khz_ap clock, + - 1: 32khz_cp clock, + - 2: 32khz_pmic clock. + +Example: Node of the MFD chip + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + +Example: Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77686 2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt index 0c80c2677104..9acea9d93160 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra114-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt new file mode 100644 index 000000000000..ded5d6212c84 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -0,0 +1,63 @@ +NVIDIA Tegra124 Clock And Reset Controller + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CAR (Clock And Reset) Controller on Tegra is the HW module responsible +for muxing and gating Tegra's clocks, and setting their rates. + +Required properties : +- compatible : Should be "nvidia,tegra124-car" +- reg : Should contain CAR registers location and length +- clocks : Should contain phandle and clock specifiers for two clocks: + the 32 KHz "32k_in", and the board-specific oscillator "osc". +- #clock-cells : Should be 1. + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + <dt-bindings/clock/tegra124-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. + +Example SoC include file: + +/ { + tegra_car: clock { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb@c5004000 { + clocks = <&tegra_car TEGRA124_CLK_USB2>; + }; +}; + +Example board file: + +/ { + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + osc: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <112400000>; + }; + + clk_32k: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + &tegra_car { + clocks = <&clk_32k> <&osc>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index fcfed5bf73fb..6c5901b503d0 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra20-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra20-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt index 0f714081e986..63618cde12df 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra30-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt new file mode 100644 index 000000000000..767401f42871 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -0,0 +1,21 @@ +Qualcomm Global Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,gcc-msm8660" + "qcom,gcc-msm8960" + "qcom,gcc-msm8974" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt new file mode 100644 index 000000000000..d572e9964c54 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt @@ -0,0 +1,21 @@ +Qualcomm Multimedia Clock & Reset Controller Binding +---------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,mmcc-msm8660" + "qcom,mmcc-msm8960" + "qcom,mmcc-msm8974" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt new file mode 100644 index 000000000000..952e373178d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -0,0 +1,28 @@ +* Renesas CPG DIV6 Clock + +The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse +Generator (CPG). They clock input is divided by a configurable factor from 1 +to 64. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,cpg-div6-clock" for generic DIV6 clocks + - reg: Base address and length of the memory resource used by the DIV6 clock + - clocks: Reference to the parent clock + - #clock-cells: Must be 0 + - clock-output-names: The name of the clock as a free-form string + + +Example +------- + + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt new file mode 100644 index 000000000000..a6a352c2771e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -0,0 +1,51 @@ +* Renesas CPG Module Stop (MSTP) Clocks + +The CPG can gate SoC device clocks. The gates are organized in groups of up to +32 gates. + +This device tree binding describes a single 32 gate clocks group per node. +Clocks are referenced by user nodes by the MSTP node phandle and the clock +index in the group, from 0 to 31. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + - reg: Base address and length of the I/O mapped registers used by the MSTP + clocks. The first register is the clock control register and is mandatory. + The second register is the clock status register and is optional when not + implemented in hardware. + - clocks: Reference to the parent clocks, one per output clock. The parents + must appear in the same order as the output clocks. + - #clock-cells: Must be 1 + - clock-output-names: The name of the clocks as free-form strings + - renesas,indices: Indices of the gate clocks into the group (0 to 31) + +The clocks, clock-output-names and renesas,indices properties contain one +entry per gate clock. The MSTP groups are sparsely populated. Unimplemented +gate clocks must not be declared. + + +Example +------- + + #include <dt-bindings/clock/r8a7790-clock.h> + + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>; + #clock-cells = <1>; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0"; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 + >; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt new file mode 100644 index 000000000000..7b41c2fe54db --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -0,0 +1,32 @@ +* Renesas R-Car Gen2 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs +and several fixed ratio dividers. + +Required Properties: + + - compatible: Must be one of + - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG + - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "main", + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z" + + +Example +------- + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0, "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", "z"; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt new file mode 100644 index 000000000000..c09f21e1d98f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt @@ -0,0 +1,39 @@ +Binding for Silicon Labs 570, 571, 598 and 599 programmable +I2C clock generators. + +Reference +This binding uses the common clock binding[1]. Details about the devices can be +found in the data sheets[2][3]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si570/571 Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf +[3] Si598/599 Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf + +Required properties: + - compatible: Shall be one of "silabs,si570", "silabs,si571", + "silabs,si598", "silabs,si599" + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + - factory-fout: Factory set default frequency. This frequency is part specific. + The correct frequency for the part used has to be provided in + order to generate the correct output frequencies. For more + details, please refer to the data sheet. + - temperature-stability: Temperature stability of the device in PPM. Should be + one of: 7, 20, 50 or 100. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si570". + - clock-frequency: Output frequency to generate. This defines the output + frequency set during boot. It can be reprogrammed during + runtime through the common clock framework. + +Example: + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + }; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 91a748fed13d..c2cb7621ad2d 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -7,8 +7,10 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be one of the following: "allwinner,sun4i-osc-clk" - for a gatable oscillator - "allwinner,sun4i-pll1-clk" - for the main PLL clock + "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 + "allwinner,sun4i-pll5-clk" - for the PLL5 clock + "allwinner,sun4i-pll6-clk" - for the PLL6 clock "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-axi-clk" - for the AXI clock "allwinner,sun4i-axi-gates-clk" - for the AXI gates @@ -33,10 +35,14 @@ Required properties: "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 + "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks + "allwinner,sun7i-a20-out-clk" - for the external output clocks Required properties for all clocks: - reg : shall be the control register address for the clock. -- clocks : shall be the input parent clock(s) phandle for the clock +- clocks : shall be the input parent clock(s) phandle for the clock. For + multiplexed clocks, the list order must match the hardware + programming order. - #clock-cells : from common clock binding; shall be set to 0 except for "allwinner,*-gates-clk" where it shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index d99af878f5d7..17b4a94916d6 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -22,6 +22,10 @@ Required properties: Optional properties: - clocks : as described in the clock bindings - clock-names : as described in the clock bindings + - fclk-enable : Bit mask to enable FCLKs statically at boot time. + Bit [0..3] correspond to FCLK0..FCLK3. The corresponding + FCLK will only be enabled if it is actually running at + boot time. Clock inputs: The following strings are optional parameters to the 'clock-names' property in diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index 051f764bedb8..f055515d2b62 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -15,6 +15,10 @@ Optional properties: - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. +- #cooling-cells: +- cooling-min-level: +- cooling-max-level: + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. Examples: @@ -33,6 +37,9 @@ cpus { 198000 850000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <2>; }; cpu@1 { diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt new file mode 100644 index 000000000000..f2aab3dc2b52 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -0,0 +1,68 @@ +* Atmel HW cryptographic accelerators + +These are the HW cryptographic accelerators found on some Atmel products. + +* Advanced Encryption Standard (AES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-aes". +- reg: Should contain AES registers location and length. +- interrupts: Should contain the IRQ line for the AES. +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +aes@f8038000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + dmas = <&dma1 2 18>, + <&dma1 2 19>; + dma-names = "tx", "rx"; + +* Triple Data Encryption Standard (Triple DES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-tdes". +- reg: Should contain TDES registers location and length. +- interrupts: Should contain the IRQ line for the TDES. + +Optional properties: +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +tdes@f803c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 4 0>; + dmas = <&dma1 2 20>, + <&dma1 2 21>; + dma-names = "tx", "rx"; +}; + +* Secure Hash Algorithm (SHA) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-sha". +- reg: Should contain SHA registers location and length. +- interrupts: Should contain the IRQ line for the SHA. + +Optional properties: +- dmas: One DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. Only one "tx" string needed. + +Example: +sha@f8034000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 4 0>; + dmas = <&dma1 2 17>; + dma-names = "tx"; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt new file mode 100644 index 000000000000..6949e50f1f16 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -0,0 +1,17 @@ +Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 . + +Required properties: +- compatible : Should be "fsl,<soc>-dcp" +- reg : Should contain MXS DCP registers location and length +- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but + is currently not implemented and not used. + +Example: + +dcp@80028000 { + compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <52 53>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index a8c21c256baa..1f5729f10621 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -50,6 +50,9 @@ Each dmas request consists of 4 cells: 0x00000008: Use fixed channel: Use automatic channel selection when unset Use DMA request line number when set + 0x00000010: Set channel as high priority: + Normal priority when unset + High priority when set Example: diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt index 90fa7da525b8..c6908e7c42cc 100644 --- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -5,6 +5,16 @@ Required properties: - reg: Should contain DMA registers location and length. This shuld include all of the per-channel registers. - interrupts: Should contain all of the per-channel DMA interrupts. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - dma +- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in + client nodes' dmas properties. The specifier represents the DMA request + select value for the peripheral. For more details, consult the Tegra TRM's + documentation of the APB DMA channel control register REQ_SEL field. Examples: @@ -27,4 +37,8 @@ apbdma: dma@6000a000 { 0 149 0x04 0 150 0x04 0 151 0x04 >; + clocks = <&tegra_car 34>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 7dab6a8f4a0e..45414bbcd945 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -2,7 +2,11 @@ EXTCON FOR PALMAS/TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible: should contain one of: + * "ti,palmas-usb-vid". + * "ti,twl6035-usb-vid". + * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid"). + * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid"). Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt new file mode 100644 index 000000000000..a2e839d6e338 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -0,0 +1,41 @@ +Davinci GPIO controller bindings + +Required Properties: +- compatible: should be "ti,dm6441-gpio" + +- reg: Physical base address of the controller and the size of memory mapped + registers. + +- gpio-controller : Marks the device node as a gpio controller. + +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are + supported at a time. + +- ti,ngpio: The number of GPIO pins supported. + +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt + line to processor. + +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + +Example: + +gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH + 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt new file mode 100644 index 000000000000..80fcb7d70e13 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt @@ -0,0 +1,37 @@ +TI/National Semiconductor LP3943 GPIO controller + +Required properties: + - compatible: "ti,lp3943-gpio" + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. See gpio.txt in this directory for a + description of the cells format. + +Example: +Simple LED controls with LP3943 GPIO controller + +&i2c4 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +leds { + compatible = "gpio-leds"; + indicator1 { + label = "indi1"; + gpios = <&gpioex 9 GPIO_ACTIVE_LOW>; + }; + + indicator2 { + label = "indi2"; + gpios = <&gpioex 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index daa30174bcc1..3ddc7ccfe5f3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips): removed. - spi-max-frequency = The maximum frequency this chip is able to handle -Example I2C: +Optional properties: +- #interrupt-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. +- interrupt-controller: Marks the device node as a interrupt controller. +NOTE: The interrupt functionality is only supported for i2c versions of the +chips. The spi chips can also do the interrupts, but this is not supported by +the linux driver yet. + +Optional device specific properties: +- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices + with two interrupt outputs (these are the devices ending with 17 and + those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + IO 8-15 are bank 2. These chips have two different interrupt outputs: + One for bank 1 and another for bank 2. If irq-mirror is set, both + interrupts are generated regardless of the bank that an input change + occured on. If it is not set, the interrupt are only generated for the + bank they belong to. + On devices with only one interrupt output this property is useless. + +Example I2C (with interrupt): gpiom1: gpio@20 { compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells=<2>; + microchip,irq-mirror; }; Example SPI: diff --git a/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt new file mode 100644 index 000000000000..f8e8f185a3db --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt @@ -0,0 +1,19 @@ +MOXA ART GPIO Controller + +Required properties: + +- #gpio-cells : Should be 2, The first cell is the pin number, + the second cell is used to specify polarity: + 0 = active high + 1 = active low +- compatible : Must be "moxa,moxart-gpio" +- reg : Should contain registers location and length + +Example: + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 8655df9440d5..f61cef74a212 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -2,10 +2,11 @@ Required Properties: - - compatible: should be one of the following. + - compatible: should contain one of the following. - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. + - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller. - "renesas,gpio-rcar": for generic R-Car GPIO controller. - reg: Base address and length of each memory resource used by the GPIO diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index b4fa934ae3a2..ab45c02aa658 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -9,6 +9,12 @@ Required properties: - #size-cells: The number of cells used to represent the size of an address range in the host1x address space. Should be 1. - ranges: The mapping of the host1x address space to the CPU address space. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - host1x The host1x top-level node defines a number of children, each representing one of the following host1x client modules: @@ -19,6 +25,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-mpe" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - mpe - vi: video input @@ -26,6 +38,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-vi" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi - epp: encoder pre-processor @@ -33,6 +51,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-epp" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - epp - isp: image signal processor @@ -40,6 +64,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-isp" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - isp - gr2d: 2D graphics engine @@ -47,12 +77,30 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-gr2d" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 2d - gr3d: 3D graphics engine Required properties: - compatible: "nvidia,tegra<chip>-gr3d" - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + (This property may be omitted if the only clock in the list is "3d") + - 3d + This MUST be the first entry. + - 3d2 (Only required on SoCs with two 3D clocks) + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 3d + - 3d2 (Only required on SoCs with two 3D clocks) - dc: display controller @@ -60,6 +108,16 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-dc" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dc + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dc Each display controller node has a child node, named "rgb", that represents the RGB output associated with the controller. It can take the following @@ -76,6 +134,16 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - vdd-supply: regulator for supply voltage - pll-supply: regulator for PLL + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - hdmi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - hdmi Optional properties: - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing @@ -88,12 +156,24 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-tvo" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. - dsi: display serial interface Required properties: - compatible: "nvidia,tegra<chip>-dsi" - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dsi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dsi Example: @@ -105,6 +185,9 @@ Example: reg = <0x50000000 0x00024000>; interrupts = <0 65 0x04 /* mpcore syncpt */ 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; #address-cells = <1>; #size-cells = <1>; @@ -115,41 +198,64 @@ Example: compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; interrupts = <0 68 0x04>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; }; vi { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; interrupts = <0 69 0x04>; + clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; }; epp { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; interrupts = <0 70 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; }; isp { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; interrupts = <0 71 0x04>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; }; gr2d { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <0 72 0x04>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; }; dc@54200000 { compatible = "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; interrupts = <0 73 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "disp1", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; rgb { status = "disabled"; @@ -160,6 +266,11 @@ Example: compatible = "nvidia,tegra20-dc"; reg = <0x54240000 0x00040000>; interrupts = <0 74 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "disp2", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; rgb { status = "disabled"; @@ -170,6 +281,11 @@ Example: compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <0 75 0x04>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; status = "disabled"; }; @@ -177,12 +293,18 @@ Example: compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <0 76 0x04>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index b689a0d9441c..4fade84bea16 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -9,6 +9,7 @@ Required properties : - interrupts: interrupt number to the cpu. - #address-cells = <1>; - #size-cells = <0>; +- clocks: phandles to input clocks. Optional properties: - Child nodes conforming to i2c bus binding @@ -21,6 +22,7 @@ i2c0: i2c@fff84000 { interrupts = <12 4 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; 24c512@50 { compatible = "24c512"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt new file mode 100644 index 000000000000..34a3fb6f8488 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -0,0 +1,50 @@ +* NXP PCA954x I2C bus switch + +Required Properties: + + - compatible: Must contain one of the following. + "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544", + "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548" + + - reg: The I2C address of the device. + + The following required properties are defined externally: + + - Standard I2C mux properties. See i2c-mux.txt in this directory. + - I2C child bus nodes. See i2c-mux.txt in this directory. + +Optional Properties: + + - reset-gpios: Reference to the GPIO connected to the reset input. + + +Example: + + i2c-switch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index 82e8f6f17179..582b4652a82a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -5,7 +5,11 @@ Required properties : - reg : Offset and length of the register set for the device - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c" - or "marvell,mv78230-i2c" + or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c" + Note: Only use "marvell,mv78230-a0-i2c" for a very rare, + initial version of the SoC which had broken offload + support. Linux auto-detects this and sets it + appropriately. - interrupts : The interrupt number Optional properties : diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/i2c-riic.txt new file mode 100644 index 000000000000..0bcc4716c319 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-riic.txt @@ -0,0 +1,29 @@ +Device tree configuration for Renesas RIIC driver + +Required properties: +- compatible : "renesas,riic-<soctype>". "renesas,riic-rz" as fallback +- reg : address start and address range size of device +- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI) +- clock-frequency : frequency of bus clock in Hz +- #address-cells : should be <1> +- #size-cells : should be <0> + +Pinctrl properties might be needed, too. See there. + +Example: + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, + <0 158 IRQ_TYPE_EDGE_RISING>, + <0 159 IRQ_TYPE_EDGE_RISING>, + <0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 164 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index 296eb4536129..278de8e64bbf 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -10,6 +10,8 @@ Required properties: inside HDMIPHY block found on several samsung SoCs (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used on EXYNOS5440 which does not need GPIO configuration. + (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as + a host to SATA PHY controller on an internal bus. - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index ef77cc7a0e46..87507e9ce6db 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -39,12 +39,23 @@ Required properties: - interrupts: Should contain I2C controller interrupts. - address-cells: Address cells for I2C device address. - size-cells: Size of the I2C device address. -- clocks: Clock ID as per - Documentation/devicetree/bindings/clock/tegra<chip-id>.txt - for I2C controller. -- clock-names: Name of the clock: - Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk". - Tegra114 I2C controller: "div-clk". +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - i2c +- dmas: Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names: Must include the following entries: + - rx + - tx Example: @@ -56,5 +67,9 @@ Example: #size-cells = <0>; clocks = <&tegra_car 12>, <&tegra_car 124>; clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index b1cb3415e6f1..1a1ac2e560e9 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -16,6 +16,7 @@ adt7461 +/-1C TDM Extended Temp Range I.C at,24c08 i2c serial eeprom (24cxx) atmel,24c02 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) +capella,cm32181 CM32181: Ambient Light Sensor catalyst,24c32 i2c serial eeprom dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM @@ -39,6 +40,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isl,isl12057 Intersil ISL12057 I2C RTC Chip maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt new file mode 100644 index 000000000000..ecc24c199fd6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/dht11.txt @@ -0,0 +1,14 @@ +* DHT11 humidity/temperature sensor (and compatibles like DHT22) + +Required properties: + - compatible: Should be "dht11" + - gpios: Should specify the GPIO connected to the sensor's data + line, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. + +Example: + +humidity_sensor { + compatible = "dht11"; + gpios = <&gpio0 6 0>; +} diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt new file mode 100644 index 000000000000..f91e809e736e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2563.txt @@ -0,0 +1,19 @@ +* AMS TAOS TSL2563 ambient light sensor + +Required properties: + + - compatible : should be "amstaos,tsl2563" + - reg : the I2C address of the sensor + +Optional properties: + + - amstaos,cover-comp-gain : integer used as multiplier for gain + compensation (default = 1) + +Example: + +tsl2563@29 { + compatible = "amstaos,tsl2563"; + reg = <0x29>; + amstaos,cover-comp-gain = <16>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt new file mode 100644 index 000000000000..90d5f34db04e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt @@ -0,0 +1,17 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + - reg : the I2C address of the magnetometer - typically 0x1e + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { + compatible = "honeywell,hmc5843" + reg = <0x1e>; +}; diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt new file mode 100644 index 000000000000..a5086e37fce6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-beeper.txt @@ -0,0 +1,13 @@ +* GPIO beeper device tree bindings + +Register a beeper connected to GPIO pin. + +Required properties: +- compatible: Should be "gpio-beeper". +- gpios: From common gpio binding; gpio connection to beeper enable pin. + +Example: + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 2995fae7ee47..0382b8bd69c6 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -13,6 +13,12 @@ Required properties: array of pin numbers which is used as column. - linux,keymap: The keymap for keys as described in the binding document devicetree/bindings/input/matrix-keymap.txt. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - kbc Optional properties, in addition to those specified by the shared matrix-keyboard bindings: @@ -31,6 +37,9 @@ keyboard: keyboard { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + resets = <&tegra_car 36>; + reset-names = "kbc"; nvidia,ghost-filter; nvidia,debounce-delay-ms = <640>; nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */ diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt new file mode 100644 index 000000000000..ec365e172236 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -0,0 +1,41 @@ +* Texas Instruments tsc2007 touchscreen controller + +Required properties: +- compatible: must be "ti,tsc2007". +- reg: I2C address of the chip. +- ti,x-plate-ohms: X-plate resistance in ohms. + +Optional properties: +- gpios: the interrupt gpio the chip is connected to (trough the penirq pin). + The penirq pin goes to low when the panel is touched. + (see GPIO binding[1] for more details). +- interrupt-parent: the phandle for the gpio controller + (see interrupt binding[0]). +- interrupts: (gpio) interrupt to which the chip is connected + (see interrupt binding[0]). +- ti,max-rt: maximum pressure. +- ti,fuzzx: specifies the absolute input fuzz x value. + If set, it will permit noise in the data up to +- the value given to the fuzz + parameter, that is used to filter noise from the event stream. +- ti,fuzzy: specifies the absolute input fuzz y value. +- ti,fuzzz: specifies the absolute input fuzz z value. +- ti,poll-period: how much time to wait (in milliseconds) before reading again the + values from the tsc2007. + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/gpio/gpio.txt + +Example: + &i2c1 { + /* ... */ + tsc2007@49 { + compatible = "ti,tsc2007"; + reg = <0x49>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + gpios = <&gpio4 0 0>; + ti,x-plate-ohms = <180>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt new file mode 100644 index 000000000000..e4be2f76a717 --- /dev/null +++ b/Documentation/devicetree/bindings/input/twl4030-keypad.txt @@ -0,0 +1,27 @@ +* TWL4030's Keypad Controller device tree bindings + +TWL4030's Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +This binding is based on the matrix-keymap binding with the following +changes: + + * keypad,num-rows and keypad,num-columns are required. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad + controller. +- interrupt: should be one of the following + - <1>: For controllers compatible with twl4030 keypad controller. + +Example: + twl_keypad: keypad { + compatible = "ti,twl4030-keypad"; + interrupts = <1>; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + }; diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt new file mode 100644 index 000000000000..c864a46cddcf --- /dev/null +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt @@ -0,0 +1,21 @@ +Texas Instruments TWL family (twl4030) pwrbutton module + +This module is part of the TWL4030. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/twl-familly.txt. + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be one of the following + - "ti,twl4030-pwrbutton": For controllers compatible with twl4030 +- interrupts: should be one of the following + - <8>: For controllers compatible with twl4030 + +Example: + +&twl { + twl_pwrbutton: pwrbutton { + compatible = "ti,twl4030-pwrbutton"; + interrupts = <8>; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt index 3d3b2b91e333..32cec4b26cd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt @@ -14,5 +14,5 @@ intc: interrupt-controller { compatible = "allwinner,sun4i-ic"; reg = <0x01c20400 0x400>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt new file mode 100644 index 000000000000..492911744ca3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt @@ -0,0 +1,32 @@ +Synopsys DesignWare APB interrupt controller (dw_apb_ictl) + +Synopsys DesignWare provides interrupt controller IP for APB known as +dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with +APB bus, e.g. Marvell Armada 1500. + +Required properties: +- compatible: shall be "snps,dw-apb-ictl" +- reg: physical base address of the controller and length of memory mapped + region starting with ENABLE_LOW register +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 +- interrupts: interrupt reference to primary interrupt controller +- interrupt-parent: (optional) reference specific primary interrupt controller + +The interrupt sources map to the corresponding bits in the interrupt +registers, i.e. +- 0 maps to bit 0 of low interrupts, +- 1 maps to bit 1 of low interrupts, +- 32 maps to bit 0 of high interrupts, +- 33 maps to bit 1 of high interrupts, +- (optional) fast interrupts start at 64. + +Example: + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index fc2191ecfd6b..8edcb9bd873b 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -112,6 +112,15 @@ Following are properties of regulator subnode. ams,enable-tracking: Enable tracking with SD1, only supported by LDO3. +Power-off: +========= +AS3722 supports the system power off by turning off all its rail. This +is provided through pm_power_off. +The device node should have the following properties to enable this +functionality +ams,system-power-controller: Boolean, to enable the power off functionality + through this device. + Example: -------- #include <dt-bindings/mfd/as3722.h> @@ -120,6 +129,8 @@ ams3722 { compatible = "ams,as3722"; reg = <0x48>; + ams,system-power-controller; + interrupt-parent = <&intc>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 5f229c5f6da9..8009c3d87f33 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -17,6 +17,15 @@ Required properties (SPI): - compatible: "google,cros-ec-spi" - reg: SPI chip select +Optional properties (SPI): +- google,cros-ec-spi-msg-delay: Some implementations of the EC require some + additional processing time in order to accept new transactions. If the delay + between transactions is not long enough the EC may not be able to respond + properly to subsequent transactions and cause them to hang. This property + specifies the delay, in usecs, introduced between transactions to account + for the time required by the EC to get back into a state in which new data + can be accepted. + Required properties (LPC): - compatible: "google,cros-ec-lpc" - reg: List of (IO address, size) pairs defining the interface uses diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt new file mode 100644 index 000000000000..e8591d6b11b4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -0,0 +1,33 @@ +TI/National Semiconductor LP3943 MFD driver + +Required properties: + - compatible: "ti,lp3943" + - reg: I2C slave address. From 0x60 to 0x67. + +LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. + +For the LP3943 GPIO properties please refer to: +Documentation/devicetree/bindings/gpio/gpio-lp3943.txt + +For the LP3943 PWM properties please refer to: +Documentation/devicetree/bindings/pwm/pwm-lp3943.txt + +Example: + +lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index c6a3469d3436..678f3cf0b8f0 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c client while probing.This document describes the binding for mfd device and PMIC submodule. +Binding for the built-in 32k clock generator block is defined separately +in bindings/clk/maxim,max77686.txt file. + Required properties: - compatible : Must be "maxim,max77686"; - reg : Specifies the i2c slave address of PMIC block. diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 78a840d7510d..15ee89c3cc7b 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -60,7 +60,7 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are 1 to 38 - - Example: LDO0, LD01, LDO28 + - Example: LDO1, LD02, LDO28 - BUCKn - valid values for n are 1 to 10. - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index a45ae08c8ed1..60960b2755f4 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -6,6 +6,9 @@ Required properties: - atmel,at91sam9g45-ssc: support dma transfer - reg: Should contain SSC registers location and length - interrupts: Should contain SSC interrupt +- clock-names: tuple listing input clock names. + Required elements: "pclk" +- clocks: phandles to input clocks. Required properties for devices compatible with "atmel,at91sam9g45-ssc": @@ -20,6 +23,8 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; }; - DMA transfer: diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt index 91dfda2e4e11..d7a6deb6b21e 100644 --- a/Documentation/devicetree/bindings/misc/bmp085.txt +++ b/Documentation/devicetree/bindings/misc/bmp085.txt @@ -8,6 +8,8 @@ Optional properties: - temp-measurement-period: temperature measurement period (milliseconds) - default-oversampling: default oversampling value to be used at startup, value range is 0-3 with rising sensitivity. +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ Example: @@ -17,4 +19,6 @@ pressure@77 { chip-id = <10>; temp-measurement-period = <100>; default-oversampling = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; }; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index c67b975c8906..532b1d440abc 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index c6d7b11db9eb..f357c16ea815 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver. Required properties: - compatible : Should be "nvidia,<chip>-sdhci" +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sdhci Optional properties: - power-gpios : Specify GPIOs for power control @@ -18,6 +24,9 @@ sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <47>; + clocks = <&tegra_car 14>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt index 5aeee53ff9f4..5ae601e7f51f 100644 --- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt +++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt @@ -7,3 +7,15 @@ Required properties: - clock-frequency : the frequency of the i2c bus - gpios : the gpio used for ec request - slave-addr: the i2c address of the slave controller +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2c diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index d5d26d443693..d6fae13ff062 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -19,6 +19,8 @@ Required properties: to define the mapping of the PCIe interface to interrupt numbers. - num-lanes: number of lanes to use + +Optional properties: - reset-gpio: gpio pin number of power good signal Optional properties for fsl,imx6q-pcie diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 6b7510775c50..24cee06915c9 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -42,14 +42,19 @@ Required properties: - 0xc2000000: prefetchable memory region Please refer to the standard PCI bus binding document for a more detailed explanation. -- clocks: List of clock inputs of the controller. Must contain an entry for - each entry in the clock-names property. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pex": The Tegra clock of that name - "afi": The Tegra clock of that name - "pcie_xclk": The Tegra clock of that name - "pll_e": The Tegra clock of that name - "cml": The Tegra clock of that name (not required for Tegra20) + - pex + - afi + - pll_e + - cml (not required for Tegra20) +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pex + - afi + - pcie_x Root ports are defined as subnodes of the PCIe controller node. @@ -91,9 +96,10 @@ SoC DTSI: 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ - clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>, - <&tegra_car 118>; - clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>; + clock-names = "pex", "afi", "pll_e"; + resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; status = "disabled"; pci@1,0 { diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt new file mode 100644 index 000000000000..3dc8b3d2ffbb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt new file mode 100644 index 000000000000..9e9e9ef9f852 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt @@ -0,0 +1,461 @@ +Broadcom Capri Pin Controller + +This is a pin controller for the Broadcom BCM281xx SoC family, which includes +BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. + +=== Pin Controller Node === + +Required Properties: + +- compatible: Must be "brcm,capri-pinctrl". +- reg: Base address of the PAD Controller register block and the size + of the block. + +For example, the following is the bare minimum node: + + pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + }; + +As a pin controller device, in addition to the required properties, this node +should also contain the pin configuration nodes that client devices reference, +if any. + +=== Pin Configuration Node === + +Each pin configuration node is a sub-node of the pin controller node and is a +container of an arbitrary number of subnodes, called pin group nodes in this +document. + +Please refer to the pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the definition of a +"pin configuration node". + +=== Pin Group Node === + +A pin group node specifies the desired pin mux and/or pin configuration for an +arbitrary number of pins. The name of the pin group node is optional and not +used. + +A pin group node only affects the properties specified in the node, and has no +effect on any properties that are omitted. + +The pin group node accepts a subset of the generic pin config properties. For +details generic pin config properties, please refer to pinctrl-bindings.txt +and <include/linux/pinctrl/pinconfig-generic.h>. + +Each pin controlled by this pin controller belong to one of three types: +Standard, I2C, and HDMI. Each type accepts a different set of pin config +properties. A list of pins and their types is provided below. + +Required Properties (applicable to all pins): + +- pins: Multiple strings. Specifies the name(s) of one or more pins to + be configured by this node. + +Optional Properties (for standard pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. +- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. +- bias-pull-up: No arguments. Pull up on pin. +- bias-pull-down: No arguments. Pull down on pin. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) +- drive-strength: Integer. Drive strength in mA. Valid values are + 2, 4, 6, 8, 10, 12, 14, 16 mA. + +Optional Properties (for I2C pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 + pull-up resisitors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins, so the valid values + are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Optional Properties (for HDMI pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- slew-rate: Integer. Controls slew rate. + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Example: +// pin controller node +pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + + // pin configuration node + dev_a_default: dev_a_active { + //group node defining 1 standard pin + grp_1 { + pins = "std_pin1"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + // group node defining 2 I2C pins + grp_2 { + pins = "i2c_pin1", "i2c_pin2"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + // group node defining 2 HDMI pins + grp_3 { + pins = "hdmi_pin1", "hdmi_pin2"; + function = "alt3"; + slew-rate = <1>; + }; + + // other pin group nodes + ... + }; + + // other pin configuration nodes + ... +}; + +In the example above, "dev_a_active" is a pin configuration node with a number +of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in +the "pins" property. Thus, the remaining properties in the "grp_1" node applies +only to this pin, including the following settings: + - setting pinmux to "alt1" + - enabling schmitt-trigger (hystersis) mode + - disabling pin bias + - setting the slew-rate to 1 + - setting the drive strength to 4 mA +Note that neither "input-enable" nor "input-disable" was specified - the pinctrl +subsystem will therefore leave this property unchanged from whatever state it +was in before applying these changes. + +The "pins" property in the pin group node "grp_2" specifies two pins - +"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, +therefore, applies to both of these pins. The properties include: + - setting pinmux to "alt2" + - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors + in parallel) + - enabling both pins' input +"slew-rate" is not specified in this pin group node, so the slew-rate for these +pins are left as-is. + +Finally, "grp_3" defines two HDMI pins. The following properties are applied to +both pins: + - setting pinmux to "alt3" + - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps + Highspeed mode +The input is neither enabled or disabled, and is left untouched. + +=== Pin Names and Type === + +The following are valid pin names and their pin types: + + "adcsync", Standard + "bat_rm", Standard + "bsc1_scl", I2C + "bsc1_sda", I2C + "bsc2_scl", I2C + "bsc2_sda", I2C + "classgpwr", Standard + "clk_cx8", Standard + "clkout_0", Standard + "clkout_1", Standard + "clkout_2", Standard + "clkout_3", Standard + "clkreq_in_0", Standard + "clkreq_in_1", Standard + "cws_sys_req1", Standard + "cws_sys_req2", Standard + "cws_sys_req3", Standard + "digmic1_clk", Standard + "digmic1_dq", Standard + "digmic2_clk", Standard + "digmic2_dq", Standard + "gpen13", Standard + "gpen14", Standard + "gpen15", Standard + "gpio00", Standard + "gpio01", Standard + "gpio02", Standard + "gpio03", Standard + "gpio04", Standard + "gpio05", Standard + "gpio06", Standard + "gpio07", Standard + "gpio08", Standard + "gpio09", Standard + "gpio10", Standard + "gpio11", Standard + "gpio12", Standard + "gpio13", Standard + "gpio14", Standard + "gps_pablank", Standard + "gps_tmark", Standard + "hdmi_scl", HDMI + "hdmi_sda", HDMI + "ic_dm", Standard + "ic_dp", Standard + "kp_col_ip_0", Standard + "kp_col_ip_1", Standard + "kp_col_ip_2", Standard + "kp_col_ip_3", Standard + "kp_row_op_0", Standard + "kp_row_op_1", Standard + "kp_row_op_2", Standard + "kp_row_op_3", Standard + "lcd_b_0", Standard + "lcd_b_1", Standard + "lcd_b_2", Standard + "lcd_b_3", Standard + "lcd_b_4", Standard + "lcd_b_5", Standard + "lcd_b_6", Standard + "lcd_b_7", Standard + "lcd_g_0", Standard + "lcd_g_1", Standard + "lcd_g_2", Standard + "lcd_g_3", Standard + "lcd_g_4", Standard + "lcd_g_5", Standard + "lcd_g_6", Standard + "lcd_g_7", Standard + "lcd_hsync", Standard + "lcd_oe", Standard + "lcd_pclk", Standard + "lcd_r_0", Standard + "lcd_r_1", Standard + "lcd_r_2", Standard + "lcd_r_3", Standard + "lcd_r_4", Standard + "lcd_r_5", Standard + "lcd_r_6", Standard + "lcd_r_7", Standard + "lcd_vsync", Standard + "mdmgpio0", Standard + "mdmgpio1", Standard + "mdmgpio2", Standard + "mdmgpio3", Standard + "mdmgpio4", Standard + "mdmgpio5", Standard + "mdmgpio6", Standard + "mdmgpio7", Standard + "mdmgpio8", Standard + "mphi_data_0", Standard + "mphi_data_1", Standard + "mphi_data_2", Standard + "mphi_data_3", Standard + "mphi_data_4", Standard + "mphi_data_5", Standard + "mphi_data_6", Standard + "mphi_data_7", Standard + "mphi_data_8", Standard + "mphi_data_9", Standard + "mphi_data_10", Standard + "mphi_data_11", Standard + "mphi_data_12", Standard + "mphi_data_13", Standard + "mphi_data_14", Standard + "mphi_data_15", Standard + "mphi_ha0", Standard + "mphi_hat0", Standard + "mphi_hat1", Standard + "mphi_hce0_n", Standard + "mphi_hce1_n", Standard + "mphi_hrd_n", Standard + "mphi_hwr_n", Standard + "mphi_run0", Standard + "mphi_run1", Standard + "mtx_scan_clk", Standard + "mtx_scan_data", Standard + "nand_ad_0", Standard + "nand_ad_1", Standard + "nand_ad_2", Standard + "nand_ad_3", Standard + "nand_ad_4", Standard + "nand_ad_5", Standard + "nand_ad_6", Standard + "nand_ad_7", Standard + "nand_ale", Standard + "nand_cen_0", Standard + "nand_cen_1", Standard + "nand_cle", Standard + "nand_oen", Standard + "nand_rdy_0", Standard + "nand_rdy_1", Standard + "nand_wen", Standard + "nand_wp", Standard + "pc1", Standard + "pc2", Standard + "pmu_int", Standard + "pmu_scl", I2C + "pmu_sda", I2C + "rfst2g_mtsloten3g", Standard + "rgmii_0_rx_ctl", Standard + "rgmii_0_rxc", Standard + "rgmii_0_rxd_0", Standard + "rgmii_0_rxd_1", Standard + "rgmii_0_rxd_2", Standard + "rgmii_0_rxd_3", Standard + "rgmii_0_tx_ctl", Standard + "rgmii_0_txc", Standard + "rgmii_0_txd_0", Standard + "rgmii_0_txd_1", Standard + "rgmii_0_txd_2", Standard + "rgmii_0_txd_3", Standard + "rgmii_1_rx_ctl", Standard + "rgmii_1_rxc", Standard + "rgmii_1_rxd_0", Standard + "rgmii_1_rxd_1", Standard + "rgmii_1_rxd_2", Standard + "rgmii_1_rxd_3", Standard + "rgmii_1_tx_ctl", Standard + "rgmii_1_txc", Standard + "rgmii_1_txd_0", Standard + "rgmii_1_txd_1", Standard + "rgmii_1_txd_2", Standard + "rgmii_1_txd_3", Standard + "rgmii_gpio_0", Standard + "rgmii_gpio_1", Standard + "rgmii_gpio_2", Standard + "rgmii_gpio_3", Standard + "rtxdata2g_txdata3g1", Standard + "rtxen2g_txdata3g2", Standard + "rxdata3g0", Standard + "rxdata3g1", Standard + "rxdata3g2", Standard + "sdio1_clk", Standard + "sdio1_cmd", Standard + "sdio1_data_0", Standard + "sdio1_data_1", Standard + "sdio1_data_2", Standard + "sdio1_data_3", Standard + "sdio4_clk", Standard + "sdio4_cmd", Standard + "sdio4_data_0", Standard + "sdio4_data_1", Standard + "sdio4_data_2", Standard + "sdio4_data_3", Standard + "sim_clk", Standard + "sim_data", Standard + "sim_det", Standard + "sim_resetn", Standard + "sim2_clk", Standard + "sim2_data", Standard + "sim2_det", Standard + "sim2_resetn", Standard + "sri_c", Standard + "sri_d", Standard + "sri_e", Standard + "ssp_extclk", Standard + "ssp0_clk", Standard + "ssp0_fs", Standard + "ssp0_rxd", Standard + "ssp0_txd", Standard + "ssp2_clk", Standard + "ssp2_fs_0", Standard + "ssp2_fs_1", Standard + "ssp2_fs_2", Standard + "ssp2_fs_3", Standard + "ssp2_rxd_0", Standard + "ssp2_rxd_1", Standard + "ssp2_txd_0", Standard + "ssp2_txd_1", Standard + "ssp3_clk", Standard + "ssp3_fs", Standard + "ssp3_rxd", Standard + "ssp3_txd", Standard + "ssp4_clk", Standard + "ssp4_fs", Standard + "ssp4_rxd", Standard + "ssp4_txd", Standard + "ssp5_clk", Standard + "ssp5_fs", Standard + "ssp5_rxd", Standard + "ssp5_txd", Standard + "ssp6_clk", Standard + "ssp6_fs", Standard + "ssp6_rxd", Standard + "ssp6_txd", Standard + "stat_1", Standard + "stat_2", Standard + "sysclken", Standard + "traceclk", Standard + "tracedt00", Standard + "tracedt01", Standard + "tracedt02", Standard + "tracedt03", Standard + "tracedt04", Standard + "tracedt05", Standard + "tracedt06", Standard + "tracedt07", Standard + "tracedt08", Standard + "tracedt09", Standard + "tracedt10", Standard + "tracedt11", Standard + "tracedt12", Standard + "tracedt13", Standard + "tracedt14", Standard + "tracedt15", Standard + "txdata3g0", Standard + "txpwrind", Standard + "uartb1_ucts", Standard + "uartb1_urts", Standard + "uartb1_urxd", Standard + "uartb1_utxd", Standard + "uartb2_urxd", Standard + "uartb2_utxd", Standard + "uartb3_ucts", Standard + "uartb3_urts", Standard + "uartb3_urxd", Standard + "uartb3_utxd", Standard + "uartb4_ucts", Standard + "uartb4_urts", Standard + "uartb4_urxd", Standard + "uartb4_utxd", Standard + "vc_cam1_scl", I2C + "vc_cam1_sda", I2C + "vc_cam2_scl", I2C + "vc_cam2_sda", I2C + "vc_cam3_scl", I2C + "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt new file mode 100644 index 000000000000..fd653bde18d5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt @@ -0,0 +1,23 @@ +* Freescale IMX25 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx25-pinfunc.h in device tree source folder for all available +imx25 PIN_FUNC_ID. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt index 353eca0efbf8..d1706ea82572 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt @@ -52,12 +52,25 @@ Required properties for pin configuration node: CONFIG can be 0 or 1, meaning Pullup disable/enable. +The iomux controller has gpio child nodes which are embedded in the iomux +control registers. They have to be defined as child nodes of the iomux device +node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges" +properties for the iomux device node are required. Example: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { @@ -83,6 +96,15 @@ The above example using macros: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt new file mode 100644 index 000000000000..6464bf769460 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt @@ -0,0 +1,144 @@ +NVIDIA Tegra124 pinmux controller + +The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 +pinctrl binding, as described in nvidia,tegra20-pinmux.txt and +nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as +a baseline, and only documents the differences between the two bindings. + +Required properties: +- compatible: "nvidia,tegra124-pinmux" +- reg: Should contain a list of base address and size pairs for: + -- first entry - the drive strength and pad control registers. + -- second entry - the pinmux registers + +Tegra124 adds the following optional properties for pin configuration subnodes. +The macros for options are defined in the + include/dt-binding/pinctrl/pinctrl-tegra.h. +- nvidia,enable-input: Integer. Enable the pin's input path. + enable :TEGRA_PIN_ENABLE0 and + disable or output only: TEGRA_PIN_DISABLE. +- nvidia,open-drain: Integer. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,io-reset: Integer. Reset the IO path. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE + +Please refer the Tegra TRM for complete details regarding which groups +support which functionality. + +Valid values for pin and group names are: + + per-pin mux groups: + + These all support nvidia,function, nvidia,tristate, nvidia,pull, + nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, + nvidia,io-reset and nvidia,rcv-sel. + + ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, + ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, + ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, + dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, + sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, + ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, + uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, + gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, + dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, + pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, + pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, + sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, + sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, + cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, + pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, + kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, + kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, + kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, + spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, + dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, + sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, + sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, + pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, + gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, + pff2, dp_hpd_pff0, + + drive groups: + + These all support nvidia,pull-down-strength, nvidia,pull-up-strength, + nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all + support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode + and nvidia,drive-type. + + ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, + dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, + gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. + +Valid values for nvidia,functions are: + + blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, + displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, + gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, + i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, + pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, + sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, + vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, + dp, rtck, sys, clk tmds. + +Example: + + pinmux: pinmux { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164 /* Pad control registers */ + 0x70003000 0x434>; /* PinMux registers */ + }; + +Example pinmux entries: + + pinctrl { + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + sdhci@78000400 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc4_default>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 1958ca9f9e5c..4414163e76d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -151,6 +151,8 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA +input-enable - enable input on pin (no effect on output) +input-disable - disable input on pin (no effect on output) input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode input-debounce - debounce mode with debound time X @@ -158,6 +160,7 @@ low-power-enable - enable low power mode low-power-disable - disable low power mode output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +slew-rate - set the slew rate Some of the generic properties take arguments. For those that do, the arguments are described below. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 7069a0b84e3a..bc0dfdfdb148 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -98,7 +98,7 @@ below for more information. In case when one register changes more than one pin's mux the pinctrl-single,bits need to be used which takes three parameters: - pinctrl-single,bits = <0xdc 0x18, 0xff>; + pinctrl-single,bits = <0xdc 0x18 0xff>; Where 0xdc is the offset from the pinctrl register base address for the device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt new file mode 100644 index 000000000000..4c352be5dd61 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -0,0 +1,92 @@ +Qualcomm MSM8974 TLMM block + +Required properties: +- compatible: "qcom,msm8x74-pinctrl" +- reg: Should be the base address and length of the TLMM block. +- interrupts: Should be the parent IRQ of the TLMM block. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. + The first cell is the gpio pin number and the + second cell is used for optional parameters. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Qualcomm's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + +Non-empty subnodes must specify the 'pins' property. +Note that not all properties are valid for all pins. + + +Valid values for qcom,pins are: + gpio0-gpio145 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data + Supports bias and drive-strength + +Valid values for qcom,function are: + blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus + + (Note that this is not yet the complete list of functions) + + + +Example: + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_default>; + + uart2_default: uart2_default { + mux { + qcom,pins = "gpio4", "gpio5"; + qcom,function = "blsp_uart2"; + }; + + tx { + qcom,pins = "gpio4"; + drive-strength = <4>; + bias-disable; + }; + + rx { + qcom,pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index d5dac7b843a9..35d2e1f186f0 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -26,6 +26,11 @@ Optional properties: - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden otherwise. Should be 3. + - interrupts-extended: Specify the interrupts associated with external + IRQ pins. This property is mandatory when the PFC handles GPIOs and + forbidden otherwise. When specified, it must contain one interrupt per + external IRQ, sorted by external IRQ number. + The PFC node also acts as a container for pin configuration nodes. Please refer to pinctrl-bindings.txt in this directory for the definition of the term "pin configuration node" and for the common pinctrl bindings used by client devices. @@ -103,6 +108,15 @@ Example 1: SH73A0 (SH-Mobile AG5) pin controller node <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; }; Example 2: A GPIO LED node that references a GPIO diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt new file mode 100644 index 000000000000..fa3596907967 --- /dev/null +++ b/Documentation/devicetree/bindings/power/isp1704.txt @@ -0,0 +1,17 @@ +Binding for NXP ISP1704 USB Charger Detection + +Required properties: +- compatible: Should contain one of the following: + * "nxp,isp1704" +- nxp,enable-gpio: Should contain a phandle + gpio-specifier + to the GPIO pin connected to the chip's enable pin. +- usb-phy: Should contain a phandle to the USB PHY + the ISP1704 is connected to. + +Example: + +isp1704 { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; +}; diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt new file mode 100644 index 000000000000..2b33750e3db2 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/charger-manager.txt @@ -0,0 +1,81 @@ +charger-manager bindings +~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties : + - compatible : "charger-manager" + - <>-supply : for regulator consumer + - cm-num-chargers : number of chargers + - cm-chargers : name of chargers + - cm-fuel-gauge : name of battery fuel gauge + - subnode <regulator> : + - cm-regulator-name : name of charger regulator + - subnode <cable> : + - cm-cable-name : name of charger cable + - cm-cable-extcon : name of extcon dev +(optional) - cm-cable-min : minimum current of cable +(optional) - cm-cable-max : maximum current of cable + +Optional properties : + - cm-name : charger manager's name (default : "battery") + - cm-poll-mode : polling mode (enum polling_modes) + - cm-poll-interval : polling interval + - cm-battery-stat : battery status (enum data_source) + - cm-fullbatt-* : data for full battery checking + - cm-thermal-zone : name of external thermometer's thermal zone + - cm-battery-* : threshold battery temperature for charging + -cold : critical cold temperature of battery for charging + -cold-in-minus : flag that cold temerature is in minus degree + -hot : critical hot temperature of battery for charging + -temp-diff : temperature difference to allow recharging + - cm-dis/charging-max = limits of charging duration + +Example : + charger-manager@0 { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-ms = <30000>; + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-num-chargers = <3>; + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1" + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator@0 { + cm-regulator-name = "chg-reg"; + cable@0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable@1 { + cm-cable-name = "TA"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + + }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index c3fc57af8772..c7ea9d4a988b 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -7,6 +7,12 @@ Required properties: - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pwm Example: @@ -14,4 +20,7 @@ Example: compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; + clocks = <&tegra_car 17>; + resets = <&tegra_car 17>; + reset-names = "pwm"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt new file mode 100644 index 000000000000..7bd9d3b12ce1 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt @@ -0,0 +1,58 @@ +TI/National Semiconductor LP3943 PWM controller + +Required properties: + - compatible: "ti,lp3943-pwm" + - #pwm-cells: Should be 2. See pwm.txt in this directory for a + description of the cells format. + Note that this hardware limits the period length to the + range 6250~1600000. + - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1. + 0 = output 0 + 1 = output 1 + . + . + 15 = output 15 + +Example: +PWM 0 is for RGB LED brightness control +PWM 1 is for brightness control of LP8557 backlight device + +&i2c3 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + /* + * PWM 0 : output 8, 9 and 10 + * PWM 1 : output 15 + */ + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; + }; + +}; + +/* LEDs control with PWM 0 of LP3943 */ +pwmleds { + compatible = "pwm-leds"; + rgb { + label = "indi::rgb"; + pwms = <&pwm3943 0 10000>; + max-brightness = <255>; + }; +}; + +&i2c4 { + /* Backlight control with PWM 1 of LP3943 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + + pwms = <&pwm3943 1 10000>; + pwm-names = "lp8557"; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt new file mode 100644 index 000000000000..31406fd4a43e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt @@ -0,0 +1,27 @@ +Haoyu Microelectronics HYM8563 Real Time Clock + +The HYM8563 provides basic rtc and alarm functionality +as well as a clock output of up to 32kHz. + +Required properties: +- compatible: should be: "haoyu,hym8563" +- reg: i2c address +- interrupts: rtc alarm/event interrupt +- #clock-cells: the value should be 0 + +Example: + +hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + #clock-cells = <0>; +}; + +device { +... + clocks = <&hym8563>; +... +}; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt new file mode 100644 index 000000000000..d0f937c355b5 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt @@ -0,0 +1,12 @@ +* Maxim (Dallas) DS1742/DS1743 Real Time Clock + +Required properties: +- compatible: Should contain "maxim,ds1742". +- reg: Physical base address of the RTC and length of memory + mapped region. + +Example: + rtc: rtc@10000000 { + compatible = "maxim,ds1742"; + reg = <0x10000000 0x800>; + }; diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt index 93f45e9dce7c..652d1ff2e8be 100644 --- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt @@ -9,6 +9,8 @@ Required properties: - compatible : should be "nvidia,tegra20-rtc". - reg : Specifies base physical address and size of the registers. - interrupts : A single interrupt specifier. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -16,4 +18,5 @@ timer { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt new file mode 100644 index 000000000000..7cb9dbf34878 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -0,0 +1,17 @@ +* sun4i/sun7i Real Time Clock + +RTC controller for the Allwinner A10/A20 + +Required properties: +- compatible : Should be "allwinner,sun4i-rtc" or "allwinner,sun7i-a20-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. + +Example: + +rtc: rtc@01c20d00 { + compatible = "allwinner,sun4i-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; +}; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 2191dcb9f1da..9c5d19ac935c 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -6,6 +6,9 @@ Required properties: additional mode or an USART new feature. - reg: Should contain registers location and length - interrupts: Should contain interrupt +- clock-names: tuple listing input clock names. + Required elements: "usart" +- clocks: phandles to input clocks. Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data @@ -26,6 +29,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x4000>; interrupts = <7>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; }; @@ -35,6 +40,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 4 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; dmas = <&dma0 2 0x3>, diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt new file mode 100644 index 000000000000..12f3cf834deb --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt @@ -0,0 +1,28 @@ +* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible: Should be "cirrus,clps711x-uart". +- reg: Address and length of the register set for the device. +- interrupts: Should contain UART TX and RX interrupt. +- clocks: Should contain UART core clock number. +- syscon: Phandle to SYSCON node, which contain UART control bits. + +Optional properties: +- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS). + +Note: Each UART port should have an alias correctly numbered +in "aliases" node. + +Example: + aliases { + serial0 = &uart1; + }; + + uart1: uart@80000480 { + compatible = "cirrus,clps711x-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks 11>; + syscon = <&syscon1>; + uart-use-ms; + }; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index 392a4493eebd..845850caf088 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this UART controller. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - serial +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Optional properties: - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable @@ -18,7 +27,11 @@ serial@70006000 { reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - nvidia,dma-request-selector = <&apbdma 8>; nvidia,enable-modem-interrupt; + clocks = <&tegra_car 6>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt new file mode 100644 index 000000000000..f372cf29068d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -0,0 +1,46 @@ +* Renesas SH-Mobile Serial Communication Interface + +Required properties: + + - compatible: Must contain one of the following: + + - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. + - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. + - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. + - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. + - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART. + - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. + - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. + - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. + - "renesas,scif" for generic SCIF compatible UART. + - "renesas,scifa" for generic SCIFA compatible UART. + - "renesas,scifb" for generic SCIFB compatible UART. + - "renesas,hscif" for generic HSCIF compatible UART. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed by the + generic version. + + - reg: Base address and length of the I/O registers used by the UART. + - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. + + - clocks: Must contain a phandle and clock-specifier pair for each entry + in clock-names. + - clock-names: Must contain "sci_ick" for the SCIx UART interface clock. + +Note: Each enabled SCIx UART should have an alias correctly numbered in the +"aliases" node. + +Example: + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic"; + reg = <0 0xe6c40000 0 64>; + interrupt-parent = <&gic>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; + clock-names = "sci_ick"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt new file mode 100644 index 000000000000..5875ca459ed1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -0,0 +1,31 @@ +ADI AXI-I2S controller + +Required properties: + - compatible : Must be "adi,axi-i2s-1.00.a" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channels that are used by + the core. The core expects two dma channels, one for transmit and one for + receive. + - dma-names : "tx" for the transmit channel, "rx" for the receive channel. + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + i2s: i2s@0x77600000 { + compatible = "adi,axi-i2s-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>, <&ps7_dma 1>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt new file mode 100644 index 000000000000..46f344965313 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -0,0 +1,30 @@ +ADI AXI-SPDIF controller + +Required properties: + - compatible : Must be "adi,axi-spdif-1.00.a" + - reg : Must contain SPDIF core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects one dma channel for transmit. + - dma-names : Must be "tx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + spdif: spdif@0x77400000 { + compatible = "adi,axi-spdif-tx-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt new file mode 100644 index 000000000000..65783de0aedf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt @@ -0,0 +1,25 @@ +* Broadcom BCM2835 SoC I2S/PCM module + +Required properties: +- compatible: "brcm,bcm2835-i2s" +- reg: A list of base address and size entries: + * The first entry should cover the PCM registers + * The second entry should cover the PCM clock registers +- dmas: List of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + + One of the DMA channels will be responsible for transmission (should be + named "tx") and one for reception (should be named "rx"). + +Example: + +bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x20>, + <0x7e101098 0x02>; + + dmas = <&dma 2>, + <&dma 3>; + dma-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt new file mode 100644 index 000000000000..bc03c9312a19 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l52.txt @@ -0,0 +1,46 @@ +CS42L52 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l52" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - cirrus,reset-gpio : GPIO controller's phandle and the number + of the GPIO used to reset the codec. + + - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency. + Allowable values of 0x00 through 0x0F. These are raw values written to the + register, not the actual frequency. The frequency is determined by the following. + Frequency = (64xFs)/(N+2) + N = chgfreq_val + Fs = Sample Rate (variable) + + - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured + as a differential input. If not present then the MICA input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured + as a differential input. If not present then the MICB input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin + 0 = 0.5 x VA + 1 = 0.6 x VA + 2 = 0.7 x VA + 3 = 0.8 x VA + 4 = 0.83 x VA + 5 = 0.91 x VA + +Example: + +codec: codec@4a { + compatible = "cirrus,cs42l52"; + reg = <0x4a>; + reset-gpio = <&gpio 10 0>; + cirrus,chgfreq-divisor = <0x05>; + cirrus.mica-differential-cfg; + cirrus,micbias-lvl = <5>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index ed785b3f67be..569b26c4a81e 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -4,7 +4,8 @@ Required properties: - compatible : "ti,dm646x-mcasp-audio" : for DM646x platforms "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, TI81xx) + "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) + "ti,dra7-mcasp-audio" : for DRA7xx platforms - reg : Should contain reg specifiers for the entries in the reg-names property. - reg-names : Should contain: @@ -36,7 +37,8 @@ Optional properties: - pinctrl-0: Should specify pin control group used for this controller. - pinctrl-names: Should contain only one value - "default", for more details please refer to pinctrl-bindings.txt - +- fck_parent : Should contain a valid clock name which will be used as parent + for the McASP fck Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt new file mode 100644 index 000000000000..d7b99fa637b5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -0,0 +1,50 @@ +Freescale Enhanced Serial Audio Interface (ESAI) Controller + +The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port +for serial communication with a variety of serial devices, including industry +standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and +other DSPs. It has up to six transmitters and four receivers. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-esai". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks: Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock used to access registers + "extal" The esai baud clock for esai controller used to derive + HCK, SCK and FS. + "fsys" The system clock derived from ahb clock used to derive + HCK, SCK and FS. + + - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM]. + + - fsl,esai-synchronous: This is a boolean property. If present, indicating + that ESAI would work in the synchronous mode, which means all the settings + for Receiving would be duplicated from Transmition related registers. + +Example: + +esai: esai@02024000 { + compatible = "fsl,imx35-esai"; + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + clocks = <&clks 208>, <&clks 118>, <&clks 208>; + clock-names = "core", "extal", "fsys"; + dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <128>; + fsl,esai-synchronous; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 4303b6ab6208..b93e9a91e30e 100644 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs. It can be programmed in AC97, I2S, left-justified, or right-justified modes. Required properties: -- compatible: Compatible list, contains "fsl,ssi". +- compatible: Compatible list, should contain one of the following + compatibles: + fsl,mpc8610-ssi + fsl,imx51-ssi + fsl,imx35-ssi + fsl,imx21-ssi - cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. - reg: Offset and length of the register set for the device. - interrupts: <a b> where a is the interrupt number and b is a diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt new file mode 100644 index 000000000000..98611a6761c0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -0,0 +1,40 @@ +Freescale Synchronous Audio Interface (SAI). + +The SAI is based on I2S module that used communicating with audio codecs, +which provides a synchronous audio interface that supports fullduplex +serial interfaces with frame synchronization such as I2S, AC97, TDM, and +codec/DSP interfaces. + + +Required properties: +- compatible: Compatible list, contains "fsl,vf610-sai". +- reg: Offset and length of the register set for the device. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names : Must include the "sai" entry. +- dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names : Two dmas have to be defined, "tx" and "rx". +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See ../pinctrl/pinctrl-bindings.txt for details of the property values. +- big-endian-regs: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + device registers. +- big-endian-data: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + fifo data. + +Example: +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; + big-endian-regs; + big-endian-data; +}; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt new file mode 100644 index 000000000000..31af7bca3099 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -0,0 +1,17 @@ +Device-Tree bindings for dummy HDMI codec + +Required properties: + - compatible: should be "linux,hdmi-audio". + +CODEC output pins: + * TX + +CODEC input pins: + * RX + +Example node: + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt new file mode 100644 index 000000000000..e4c8b36dcf89 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -0,0 +1,43 @@ +MAX98090 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "maxim,max98090". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Pins on the device (for linking into audio routes): + + * MIC1 + * MIC2 + * DMICL + * DMICR + * IN1 + * IN2 + * IN3 + * IN4 + * IN5 + * IN6 + * IN12 + * IN34 + * IN56 + * HPL + * HPR + * SPKL + * SPKR + * RCVL + * RCVR + * MICBIAS + +Example: + +audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt index 8b8903ef0800..57f40f93453e 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-alc5632" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt new file mode 100644 index 000000000000..9c7c55c71370 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt @@ -0,0 +1,51 @@ +NVIDIA Tegra audio complex, with MAX98090 CODEC + +Required properties: +- compatible : "nvidia,tegra-audio-max98090" +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the MAX98090's pins (as documented in its binding), and the jacks + on the board: + + * Headphones + * Speakers + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's + connected to the CODEC. +- nvidia,audio-codec : The phandle of the MAX98090 audio codec. + +Optional properties: +- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in + +Example: + +sound { + compatible = "nvidia,tegra-audio-max98090-venice2", + "nvidia,tegra-audio-max98090"; + nvidia,model = "NVIDIA Tegra Venice2"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt index dc6224994d69..7788808dcd0b 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC Required properties: - compatible : "nvidia,tegra-audio-rt5640" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt index aab6ce0ad2fc..96f6a57dd6b4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8753" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index 4b44dfb6ca0d..b795d282818d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8903" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt index ad589b163639..436f6cd9d07c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm9712" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt index c1454979c1ef..eaf00102d92c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt @@ -4,19 +4,33 @@ Required properties: - compatible : "nvidia,tegra20-ac97" - reg : Should contain AC97 controller registers location and length - interrupts : Should contain AC97 interrupt -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for the AC97 controller +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - ac97 +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number of the GPIO used to reset the external AC97 codec - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number of the GPIO corresponding with the AC97 DAP _FS line + Example: ac97@70002000 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; interrupts = <0 81 0x04>; - nvidia,dma-request-selector = <&apbdma 12>; nvidia,codec-reset-gpio = <&gpio 170 0>; nvidia,codec-sync-gpio = <&gpio 120 0>; + clocks = <&tegra_car 3>; + resets = <&tegra_car 3>; + reset-names = "ac97"; + dmas = <&apbdma 12>, <&apbdma 12>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt index 0df2b5c816e3..dc30c6bfbe95 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt @@ -4,8 +4,17 @@ Required properties: - compatible : "nvidia,tegra20-i2s" - reg : Should contain I2S registers location and length - interrupts : Should contain I2S interrupt -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this I2S controller +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -13,5 +22,9 @@ i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = < 45 >; - nvidia,dma-request-selector = < &apbdma 2 >; + clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt index 0e5c12c66523..946e2ac46091 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -7,18 +7,48 @@ Required properties: - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks. - Tegra114 requires an additional entry, for the APBIF2 register block. - interrupts : Should contain AHUB interrupt -- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each - entry contains the Tegra DMA controller's phandle and request selector. - If a single entry is present, the request selectors for the channels are - assumed to be contiguous, and increment from this value. - If multiple values are given, one value must be given per channel. -- clocks : Must contain an entry for each required entry in clock-names. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0, - dam1, dam2, spdif_in. - - Tegra114: Additionally requires amx, adx. + - d_audio + - apbif +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + Tegra30 and later: + - d_audio + - apbif + - i2s0 + - i2s1 + - i2s2 + - i2s3 + - i2s4 + - dam0 + - dam1 + - dam2 + - spdif + Tegra114 and later additionally require: + - amx + - adx + Tegra124 and later additionally require: + - amx1 + - adx1 + - afc0 + - afc1 + - afc2 + - afc3 + - afc4 + - afc5 - ranges : The bus address mapping for the configlink register bus. Can be empty since the mapping is 1:1. +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx0 .. rx<n> + - tx0 .. tx<n> + ... where n is: + Tegra30: 3 + Tegra114, Tegra124: 9 - #address-cells : For the configlink bus. Should be <1>; - #size-cells : For the configlink bus. Should be <1>. @@ -35,13 +65,20 @@ ahub@70080000 { reg = <0x70080000 0x200 0x70080200 0x100>; interrupts = < 0 103 0x04 >; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, + clocks = <&tegra_car 106>, <&tegra_car 107>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, - <&tegra_car 110>, <&tegra_car 162>; - clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + <&tegra_car 110>, <&tegra_car 10>; + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", "i2s3", "i2s4", "dam0", "dam1", "dam2", - "spdif_in"; + "spdif"; + dmas = <&apbdma 1>, <&apbdma 1>; + <&apbdma 2>, <&apbdma 2>; + <&apbdma 3>, <&apbdma 3>; + <&apbdma 4>, <&apbdma 4>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3"; ranges; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt index dfa6c037124a..0c113ffe3814 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller Required properties: - compatible : "nvidia,tegra30-i2s" - reg : Should contain I2S registers location and length +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s - nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. Example: -i2s@70002800 { +i2s@70080300 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt new file mode 100644 index 000000000000..e9e20ec67d62 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -0,0 +1,77 @@ +Simple-Card: + +Simple-Card specifies audio DAI connection of SoC <-> codec. + +Required properties: + +- compatible : "simple-audio-card" + +Optional properties: + +- simple-audio-card,format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- simple-audio-card,routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. + +Required subnodes: + +- simple-audio-card,cpu : CPU sub-node +- simple-audio-card,codec : CODEC sub-node + +Required CPU/CODEC subnodes properties: + +- sound-dai : phandle and port of CPU/CODEC + +Optional CPU/CODEC subnodes properties: + +- format : CPU/CODEC specific audio format if needed. + see simple-audio-card,format +- frame-master : bool property. add this if subnode is frame master +- bitclock-master : bool property. add this if subnode is bitclock master +- bitclock-inversion : bool property. add this if subnode has clock inversion +- frame-inversion : bool property. add this if subnode has frame inversion +- clocks / system-clock-frequency : specify subnode's clock if needed. + it can be specified via "clocks" if system has + clock node (= common clock), or "system-clock-frequency" + (if system doens't support common clock) + +Example: + +sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-routing = + "MIC_IN", "Mic Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + clocks = <&osc>; + }; +}; + +&i2c0 { + ak4648: ak4648@12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; +}; + +sh_fsi2: sh_fsi2@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 5e6040c2c2e9..9d8ea14db490 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -6,6 +6,7 @@ Required properties: - compatible - "string" - One of: "ti,tlv320aic3x" - Generic TLV320AIC3x device + "ti,tlv320aic32x4" - TLV320AIC32x4 "ti,tlv320aic33" - TLV320AIC33 "ti,tlv320aic3007" - TLV320AIC3007 "ti,tlv320aic3106" - TLV320AIC3106 diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index 91ff771c7e77..7ea701e07dc2 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -4,10 +4,19 @@ Required properties: - compatible : should be "nvidia,tegra114-spi". - reg: Should contain SPI registers location and length. - interrupts: Should contain SPI interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SPI controller. -- This is also require clock named "spi" as per binding document - Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names : Must include the following entries: + - spi +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. Recommended properties: - spi-max-frequency: Definition as per @@ -18,9 +27,14 @@ spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index 7b53da5cb75b..bdf08e6dec9b 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra20-sflash". - reg: Should contain SFLASH registers location and length. - interrupts: Should contain SFLASH interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SFLASH controller. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Recommended properties: - spi-max-frequency: Definition as per @@ -17,10 +26,13 @@ spi@7000c380 { compatible = "nvidia,tegra20-sflash"; reg = <0x7000c380 0x80>; interrupts = <0 39 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 43>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; status = "disabled"; }; - diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index eefe15e3d95e..5db9144a33c8 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". - reg: Should contain SLINK registers location and length. - interrupts: Should contain SLINK interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SLINK controller. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Recommended properties: - spi-max-frequency: Definition as per @@ -17,10 +26,13 @@ spi@7000d600 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; - diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt deleted file mode 100644 index 1a1b7cfa4845..000000000000 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ /dev/null @@ -1,15 +0,0 @@ -Platform DesignWare HS OTG USB 2.0 controller ------------------------------------------------------ - -Required properties: -- compatible : "snps,dwc2" -- reg : Should contain 1 register range (address and length) -- interrupts : Should contain 1 interrupt - -Example: - - usb@101c0000 { - compatible = "ralink,rt3050-usb, snps,dwc2"; - reg = <0x101c0000 40000>; - interrupts = <18>; - }; diff --git a/Documentation/devicetree/bindings/staging/xillybus.txt b/Documentation/devicetree/bindings/staging/xillybus.txt new file mode 100644 index 000000000000..9e316dc2e40f --- /dev/null +++ b/Documentation/devicetree/bindings/staging/xillybus.txt @@ -0,0 +1,20 @@ +* Xillybus driver for generic FPGA interface + +Required properties: +- compatible: Should be "xillybus,xillybus-1.00.a" +- reg: Address and length of the register set for the device +- interrupts: Contains one interrupt node, typically consisting of three cells. +- interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- dma-coherent: Present if DMA operations are coherent + +Example: + + xillybus@ff200400 { + compatible = "xillybus,xillybus-1.00.a"; + reg = < 0xff200400 0x00000080 >; + interrupts = < 0 40 1 >; + interrupt-parent = <&intc>; + } ; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 541c25e49abf..1f0f67234a91 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -8,10 +8,14 @@ Required properties: calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Optional properties: +- clocks : thermal sensor's clock source. + Example: tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; + clocks = <&clks 172>; }; diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt new file mode 100644 index 000000000000..f5db6b72a36f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -0,0 +1,595 @@ +* Thermal Framework Device Tree descriptor + +This file describes a generic binding to provide a way of +defining hardware thermal structure using device tree. +A thermal structure includes thermal zones and their components, +such as trip points, polling intervals, sensors and cooling devices +binding descriptors. + +The target of device tree thermal descriptors is to describe only +the hardware thermal aspects. The thermal device tree bindings are +not about how the system must control or which algorithm or policy +must be taken in place. + +There are five types of nodes involved to describe thermal bindings: +- thermal sensors: devices which may be used to take temperature + measurements. +- cooling devices: devices which may be used to dissipate heat. +- trip points: describe key temperatures at which cooling is recommended. The + set of points should be chosen based on hardware limits. +- cooling maps: used to describe links between trip points and cooling devices; +- thermal zones: used to describe thermal data within the hardware; + +The following is a description of each of these node types. + +* Thermal sensor devices + +Thermal sensor devices are nodes providing temperature sensing capabilities on +thermal zones. Typical devices are I2C ADC converters and bandgaps. These are +nodes providing temperature data to thermal zones. Thermal sensor devices may +control one or more internal sensors. + +Required property: +- #thermal-sensor-cells: Used to provide sensor device specific information + Type: unsigned while referring to it. Typically 0 on thermal sensor + Size: one cell nodes with only one sensor, and at least 1 on nodes + with several internal sensors, in order + to identify uniquely the sensor instances within + the IC. See thermal zone binding for more details + on how consumers refer to sensor devices. + +* Cooling device nodes + +Cooling devices are nodes providing control on power dissipation. There +are essentially two ways to provide control on power dissipation. First +is by means of regulating device performance, which is known as passive +cooling. A typical passive cooling is a CPU that has dynamic voltage and +frequency scaling (DVFS), and uses lower frequencies as cooling states. +Second is by means of activating devices in order to remove +the dissipated heat, which is known as active cooling, e.g. regulating +fan speeds. In both cases, cooling devices shall have a way to determine +the state of cooling in which the device is. + +Any cooling device has a range of cooling states (i.e. different levels +of heat dissipation). For example a fan's cooling states correspond to +the different fan speeds possible. Cooling states are referred to by +single unsigned integers, where larger numbers mean greater heat +dissipation. The precise set of cooling states associated with a device +(as referred to be the cooling-min-state and cooling-max-state +properties) should be defined in a particular device's binding. +For more examples of cooling devices, refer to the example sections below. + +Required properties: +- cooling-min-state: An integer indicating the smallest + Type: unsigned cooling state accepted. Typically 0. + Size: one cell + +- cooling-max-state: An integer indicating the largest + Type: unsigned cooling state accepted. + Size: one cell + +- #cooling-cells: Used to provide cooling device specific information + Type: unsigned while referring to it. Must be at least 2, in order + Size: one cell to specify minimum and maximum cooling state used + in the reference. The first cell is the minimum + cooling state requested and the second cell is + the maximum cooling state requested in the reference. + See Cooling device maps section below for more details + on how consumers refer to cooling devices. + +* Trip points + +The trip node is a node to describe a point in the temperature domain +in which the system takes an action. This node describes just the point, +not the action. + +Required properties: +- temperature: An integer indicating the trip temperature level, + Type: signed in millicelsius. + Size: one cell + +- hysteresis: A low hysteresis value on temperature property (above). + Type: unsigned This is a relative value, in millicelsius. + Size: one cell + +- type: a string containing the trip type. Expected values are: + "active": A trip point to enable active cooling + "passive": A trip point to enable passive cooling + "hot": A trip point to notify emergency + "critical": Hardware not reliable. + Type: string + +* Cooling device maps + +The cooling device maps node is a node to describe how cooling devices +get assigned to trip points of the zone. The cooling devices are expected +to be loaded in the target system. + +Required properties: +- cooling-device: A phandle of a cooling device with its specifier, + Type: phandle + referring to which cooling device is used in this + cooling specifier binding. In the cooling specifier, the first cell + is the minimum cooling state and the second cell + is the maximum cooling state used in this map. +- trip: A phandle of a trip point node within the same thermal + Type: phandle of zone. + trip point node + +Optional property: +- contribution: The cooling contribution to the thermal zone of the + Type: unsigned referred cooling device at the referred trip point. + Size: one cell The contribution is a ratio of the sum + of all cooling contributions within a thermal zone. + +Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle +limit specifier means: +(i) - minimum state allowed for minimum cooling state used in the reference. +(ii) - maximum state allowed for maximum cooling state used in the reference. +Refer to include/dt-bindings/thermal/thermal.h for definition of this constant. + +* Thermal zone nodes + +The thermal zone node is the node containing all the required info +for describing a thermal zone, including its cooling device bindings. The +thermal zone node must contain, apart from its own properties, one sub-node +containing trip nodes and one sub-node containing all the zone cooling maps. + +Required properties: +- polling-delay: The maximum number of milliseconds to wait between polls + Type: unsigned when checking this thermal zone. + Size: one cell + +- polling-delay-passive: The maximum number of milliseconds to wait + Type: unsigned between polls when performing passive cooling. + Size: one cell + +- thermal-sensors: A list of thermal sensor phandles and sensor specifier + Type: list of used while monitoring the thermal zone. + phandles + sensor + specifier + +- trips: A sub-node which is a container of only trip point nodes + Type: sub-node required to describe the thermal zone. + +- cooling-maps: A sub-node which is a container of only cooling device + Type: sub-node map nodes, used to describe the relation between trips + and cooling devices. + +Optional property: +- coefficients: An array of integers (one signed cell) containing + Type: array coefficients to compose a linear relation between + Elem size: one cell the sensors listed in the thermal-sensors property. + Elem type: signed Coefficients defaults to 1, in case this property + is not specified. A simple linear polynomial is used: + Z = c0 * x0 + c1 + x1 + ... + c(n-1) * x(n-1) + cn. + + The coefficients are ordered and they match with sensors + by means of sensor ID. Additional coefficients are + interpreted as constant offset. + +Note: The delay properties are bound to the maximum dT/dt (temperature +derivative over time) in two situations for a thermal zone: +(i) - when passive cooling is activated (polling-delay-passive); and +(ii) - when the zone just needs to be monitored (polling-delay) or +when active cooling is activated. + +The maximum dT/dt is highly bound to hardware power consumption and dissipation +capability. The delays should be chosen to account for said max dT/dt, +such that a device does not cross several trip boundaries unexpectedly +between polls. Choosing the right polling delays shall avoid having the +device in temperature ranges that may damage the silicon structures and +reduce silicon lifetime. + +* The thermal-zones node + +The "thermal-zones" node is a container for all thermal zone nodes. It shall +contain only sub-nodes describing thermal zones as in the section +"Thermal zone nodes". The "thermal-zones" node appears under "/". + +* Examples + +Below are several examples on how to use thermal data descriptors +using device tree bindings: + +(a) - CPU thermal zone + +The CPU thermal zone example below describes how to setup one thermal zone +using one single sensor as temperature source and many cooling devices and +power dissipation control sources. + +#include <dt-bindings/thermal/thermal.h> + +cpus { + /* + * Here is an example of describing a cooling device for a DVFS + * capable CPU. The CPU node describes its four OPPs. + * The cooling states possible are 0..3, and they are + * used as OPP indexes. The minimum cooling state is 0, which means + * all four OPPs can be available to the system. The maximum + * cooling state is 3, which means only the lowest OPPs (198MHz@0.85V) + * can be available in the system. + */ + cpu0: cpu@0 { + ... + operating-points = < + /* kHz uV */ + 970000 1200000 + 792000 1100000 + 396000 950000 + 198000 850000 + >; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; /* min followed by max */ + }; + ... +}; + +&i2c1 { + ... + /* + * A simple fan controller which supports 10 speeds of operation + * (represented as 0-9). + */ + fan0: fan@0x48 { + ... + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; /* min followed by max */ + }; +}; + +ocp { + ... + /* + * A simple IC with a single bandgap temperature sensor. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&bandgap0>; + + trips { + cpu-alert0: cpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + cpu-alert1: cpu-alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu-crit: cpu-crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu-alert0>; + cooling-device = <&fan0 THERMAL_NO_LIMITS 4>; + }; + map1 { + trip = <&cpu-alert1>; + cooling-device = <&fan0 5 THERMAL_NO_LIMITS>; + }; + map2 { + trip = <&cpu-alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>; + }; + }; + }; +}; + +In the example above, the ADC sensor (bandgap0) at address 0x0000ED00 is +used to monitor the zone 'cpu-thermal' using its sole sensor. A fan +device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten +different cooling states 0-9. It is used to remove the heat out of +the thermal zone 'cpu-thermal' using its cooling states +from its minimum to 4, when it reaches trip point 'cpu-alert0' +at 90C, as an example of active cooling. The same cooling device is used at +'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also +linked to the same thermal zone, 'cpu-thermal', as a passive cooling device, +using all its cooling states at trip point 'cpu-alert1', +which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the +temperature of 125C, represented by the trip point 'cpu-crit', the silicon +is not reliable anymore. + +(b) - IC with several internal sensors + +The example below describes how to deploy several thermal zones based off a +single sensor IC, assuming it has several internal sensors. This is a common +case on SoC designs with several internal IPs that may need different thermal +requirements, and thus may have their own sensor to monitor or detect internal +hotspots in their silicon. + +#include <dt-bindings/thermal/thermal.h> + +ocp { + ... + /* + * A simple IC with several bandgap temperature sensors. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <1>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 0>; + + trips { + /* each zone within the SoC may have its own trips */ + cpu-alert: cpu-alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu-crit: cpu-crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; + + gpu-thermal: gpu-thermal { + polling-delay-passive = <120>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 1>; + + trips { + /* each zone within the SoC may have its own trips */ + gpu-alert: gpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu-crit: gpu-crit { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; + + dsp-thermal: dsp-thermal { + polling-delay-passive = <50>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 2>; + + trips { + /* each zone within the SoC may have its own trips */ + dsp-alert: gpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + dsp-crit: gpu-crit { + temperature = <135000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; +}; + +In the example above, there is one bandgap IC which has the capability to +monitor three sensors. The hardware has been designed so that sensors are +placed on different places in the DIE to monitor different temperature +hotspots: one for CPU thermal zone, one for GPU thermal zone and the +other to monitor a DSP thermal zone. + +Thus, there is a need to assign each sensor provided by the bandgap IC +to different thermal zones. This is achieved by means of using the +#thermal-sensor-cells property and using the first cell of the sensor +specifier as sensor ID. In the example, then, <bandgap 0> is used to +monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal +zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone +may be uncorrelated, having its own dT/dt requirements, trips +and cooling maps. + + +(c) - Several sensors within one single thermal zone + +The example below illustrates how to use more than one sensor within +one thermal zone. + +#include <dt-bindings/thermal/thermal.h> + +&i2c1 { + ... + /* + * A simple IC with a single temperature sensor. + */ + adc: sensor@0x49 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +ocp { + ... + /* + * A simple IC with a single bandgap temperature sensor. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&bandgap0>, /* cpu */ + <&adc>; /* pcb north */ + + /* hotspot = 100 * bandgap - 120 * adc + 484 */ + coefficients = <100 -120 484>; + + trips { + ... + }; + + cooling-maps { + ... + }; + }; +}; + +In some cases, there is a need to use more than one sensor to extrapolate +a thermal hotspot in the silicon. The above example illustrates this situation. +For instance, it may be the case that a sensor external to CPU IP may be placed +close to CPU hotspot and together with internal CPU sensor, it is used +to determine the hotspot. Assuming this is the case for the above example, +the hypothetical extrapolation rule would be: + hotspot = 100 * bandgap - 120 * adc + 484 + +In other context, the same idea can be used to add fixed offset. For instance, +consider the hotspot extrapolation rule below: + hotspot = 1 * adc + 6000 + +In the above equation, the hotspot is always 6C higher than what is read +from the ADC sensor. The binding would be then: + thermal-sensors = <&adc>; + + /* hotspot = 1 * adc + 6000 */ + coefficients = <1 6000>; + +(d) - Board thermal + +The board thermal example below illustrates how to setup one thermal zone +with many sensors and many cooling devices. + +#include <dt-bindings/thermal/thermal.h> + +&i2c1 { + ... + /* + * An IC with several temperature sensor. + */ + adc-dummy: sensor@0x50 { + ... + #thermal-sensor-cells = <1>; /* sensor internal ID */ + }; +}; + +thermal-zones { + batt-thermal { + polling-delay-passive = <500>; /* milliseconds */ + polling-delay = <2500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&adc-dummy 4>; + + trips { + ... + }; + + cooling-maps { + ... + }; + }; + + board-thermal: board-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <2500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&adc-dummy 0>, /* pcb top edge */ + <&adc-dummy 1>, /* lcd */ + <&adc-dymmy 2>; /* back cover */ + /* + * An array of coefficients describing the sensor + * linear relation. E.g.: + * z = c1*x1 + c2*x2 + c3*x3 + */ + coefficients = <1200 -345 890>; + + trips { + /* Trips are based on resulting linear equation */ + cpu-trip: cpu-trip { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu-trip: gpu-trip { + temperature = <55000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + } + lcd-trip: lcp-trip { + temperature = <53000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + crit-trip: crit-trip { + temperature = <68000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu-trip>; + cooling-device = <&cpu0 0 2>; + contribution = <55>; + }; + map1 { + trip = <&gpu-trip>; + cooling-device = <&gpu0 0 2>; + contribution = <20>; + }; + map2 { + trip = <&lcd-trip>; + cooling-device = <&lcd0 5 10>; + contribution = <15>; + }; + }; + }; +}; + +The above example is a mix of previous examples, a sensor IP with several internal +sensors used to monitor different zones, one of them is composed by several sensors and +with different cooling devices. diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt new file mode 100644 index 000000000000..7c26154b8bbb --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -0,0 +1,22 @@ +Allwinner SoCs High Speed Timer Controller + +Required properties: + +- compatible : should be "allwinner,sun5i-a13-hstimer" or + "allwinner,sun7i-a20-hstimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i + one) +- clocks: phandle to the source clock (usually the AHB clock) + +Example: + +timer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 1>, + <0 52 1>, + <0 53 1>, + <0 54 1>; + clocks = <&ahb1_gates 19>; +}; diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt index e019fdc38773..4a864bd10d3d 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt @@ -8,6 +8,8 @@ Required properties: - compatible : should be "nvidia,tegra20-timer". - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupts; one per timer channel. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -18,4 +20,5 @@ timer { 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 132>; }; diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt index 906109d4c593..b5082a1cf461 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt @@ -10,6 +10,8 @@ Required properties: - reg : Specifies base physical address and size of the registers. - interrupts : A list of 6 interrupts; one per each of timer channels 1 through 5, and one for the shared interrupt for the remaining channels. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. timer { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; @@ -20,4 +22,5 @@ timer { 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 214>; }; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index b5a86d20ee36..167d5dab9f64 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -31,38 +31,58 @@ Required properties: 7: .. i: Local Timer Interrupt n -Example 1: In this example, the system uses only the first global timer - interrupt generated by MCT and the remaining three global timer - interrupts are unused. Two local timer interrupts have been - specified. + For MCT block that uses a per-processor interrupt for local timers, such + as ones compatible with "samsung,exynos4412-mct", only one local timer + interrupt might be specified, meaning that all local timers use the same + per processor interrupt. + +Example 1: In this example, the IP contains two local timers, using separate + interrupts, so two local timer interrupts have been specified, + in addition to four global timer interrupts. mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, <0 42 0>, <0 48 0>; }; -Example 2: In this example, the MCT global and local timer interrupts are - connected to two separate interrupt controllers. Hence, an - interrupt-map is created to map the interrupts to the respective - interrupt controllers. +Example 2: In this example, the timer interrupts are connected to two separate + interrupt controllers. Hence, an interrupt-map is created to map + the interrupts to the respective interrupt controllers. mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; + +Example 3: In this example, the IP contains four local timers, but using + a per-processor interrupt to handle them. Either all the local + timer interrupts can be specified, with the same interrupt specifier + value or just the first one. + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + + /* Both ways are possible in this case. Either: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>; + /* or: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index b4b5b7906c88..b4b5b7906c88 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt new file mode 100644 index 000000000000..b8b6871f116f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -0,0 +1,29 @@ +Platform DesignWare HS OTG USB 2.0 controller +----------------------------------------------------- + +Required properties: +- compatible : One of: + - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - snps,dwc2: A generic DWC2 USB controller with default parameters. +- reg : Should contain 1 register range (address and length) +- interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties + +Example: + + usb@101c0000 { + compatible = "ralink,rt3050-usb, snps,dwc2"; + reg = <0x101c0000 40000>; + interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + }; diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt new file mode 100644 index 000000000000..0c5118f7a916 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt @@ -0,0 +1,28 @@ +USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + +The GRUSBDC USB Device Controller core is available in the GRLIB VHDL +IP core library. + +Note: In the ordinary environment for the core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_USBDC" or "01_021" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +- epibufsizes : An array of buffer sizes for IN endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/usb/keystone-phy.txt b/Documentation/devicetree/bindings/usb/keystone-phy.txt new file mode 100644 index 000000000000..f37b3a86341d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-phy.txt @@ -0,0 +1,20 @@ +TI Keystone USB PHY + +Required properties: + - compatible: should be "ti,keystone-usbphy". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the usb phy control register set. + +The main purpose of this PHY driver is to enable the USB PHY reference clock +gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just +an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 +phy node in the USB Glue layer driver node. + +usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt new file mode 100644 index 000000000000..60527d335b58 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -0,0 +1,42 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the USB subsystem on + the SOC. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt index df0933043a5b..3dc9140e3dfb 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt @@ -8,7 +8,12 @@ and additions : Required properties : - compatible : Should be "nvidia,tegra20-ehci". - nvidia,phy : phandle of the PHY that the controller is connected to. - - clocks : Contains a single entry which defines the USB controller's clock. + - clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb Optional properties: - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 090e5e22bd2b..c495135115cb 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -87,6 +87,8 @@ Required properties: e.g. USB3 PHY and SATA PHY on OMAP5. "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on DRA7 platform. + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register for other types. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 391e7299e44c..5780ffcd79af 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) +amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation @@ -36,12 +37,14 @@ GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. gmt Global Mixed-mode Technology, Inc. gumstix Gumstix, Inc. +haoyu Haoyu Microelectronic Co. Ltd. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +isl Intersil karo Ka-Ro electronics GmbH lg LG Corporation linux Linux-specific binding @@ -78,6 +81,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson ti Texas Instruments +tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz v3 V3 Semiconductor diff --git a/Documentation/driver-model/design-patterns.txt b/Documentation/driver-model/design-patterns.txt new file mode 100644 index 000000000000..ba7b2df64904 --- /dev/null +++ b/Documentation/driver-model/design-patterns.txt @@ -0,0 +1,116 @@ + +Device Driver Design Patterns +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This document describes a few common design patterns found in device drivers. +It is likely that subsystem maintainers will ask driver developers to +conform to these design patterns. + +1. State Container +2. container_of() + + +1. State Container +~~~~~~~~~~~~~~~~~~ + +While the kernel contains a few device drivers that assume that they will +only be probed() once on a certain system (singletons), it is custom to assume +that the device the driver binds to will appear in several instances. This +means that the probe() function and all callbacks need to be reentrant. + +The most common way to achieve this is to use the state container design +pattern. It usually has this form: + +struct foo { + spinlock_t lock; /* Example member */ + (...) +}; + +static int foo_probe(...) +{ + struct foo *foo; + + foo = devm_kzalloc(dev, sizeof(*foo), GFP_KERNEL); + if (!foo) + return -ENOMEM; + spin_lock_init(&foo->lock); + (...) +} + +This will create an instance of struct foo in memory every time probe() is +called. This is our state container for this instance of the device driver. +Of course it is then necessary to always pass this instance of the +state around to all functions that need access to the state and its members. + +For example, if the driver is registering an interrupt handler, you would +pass around a pointer to struct foo like this: + +static irqreturn_t foo_handler(int irq, void *arg) +{ + struct foo *foo = arg; + (...) +} + +static int foo_probe(...) +{ + struct foo *foo; + + (...) + ret = request_irq(irq, foo_handler, 0, "foo", foo); +} + +This way you always get a pointer back to the correct instance of foo in +your interrupt handler. + + +2. container_of() +~~~~~~~~~~~~~~~~~ + +Continuing on the above example we add an offloaded work: + +struct foo { + spinlock_t lock; + struct workqueue_struct *wq; + struct work_struct offload; + (...) +}; + +static void foo_work(struct work_struct *work) +{ + struct foo *foo = container_of(work, struct foo, offload); + + (...) +} + +static irqreturn_t foo_handler(int irq, void *arg) +{ + struct foo *foo = arg; + + queue_work(foo->wq, &foo->offload); + (...) +} + +static int foo_probe(...) +{ + struct foo *foo; + + foo->wq = create_singlethread_workqueue("foo-wq"); + INIT_WORK(&foo->offload, foo_work); + (...) +} + +The design pattern is the same for an hrtimer or something similar that will +return a single argument which is a pointer to a struct member in the +callback. + +container_of() is a macro defined in <linux/kernel.h> + +What container_of() does is to obtain a pointer to the containing struct from +a pointer to a member by a simple subtraction using the offsetof() macro from +standard C, which allows something similar to object oriented behaviours. +Notice that the contained member must not be a pointer, but an actual member +for this to work. + +We can see here that we avoid having global pointers to our struct foo * +instance this way, while still keeping the number of parameters passed to the +work function to a single pointer. diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 5bdc8cb5fc28..4f7897e99cba 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -242,6 +242,8 @@ IIO devm_iio_device_free() devm_iio_trigger_alloc() devm_iio_trigger_free() + devm_iio_device_register() + devm_iio_device_unregister() IO region devm_request_region() diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 41f41632ee55..07795ec51cde 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -48,7 +48,7 @@ struct platform_driver { struct device_driver driver; }; -Note that probe() should general verify that the specified device hardware +Note that probe() should in general verify that the specified device hardware actually exists; sometimes platform setup code can't be sure. The probing can use device resources, including clocks, and device platform_data. diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index 1bbdcfcf1f13..46325eb2ea76 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -108,6 +108,12 @@ If your query set is big, you can batch them too: ~# cat query-batch-file > <debugfs>/dynamic_debug/control +A another way is to use wildcard. The match rule support '*' (matches +zero or more characters) and '?' (matches exactly one character).For +example, you can match all usb drivers: + + ~# echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control + At the syntactical level, a command comprises a sequence of match specifications, followed by a flags change specification. @@ -315,6 +321,9 @@ nullarbor:~ # echo -n 'func svc_process -p' > nullarbor:~ # echo -n 'format "nfsd: READ" +p' > <debugfs>/dynamic_debug/control +// enable messages in files of which the pathes include string "usb" +nullarbor:~ # echo -n '*usb* +p' > <debugfs>/dynamic_debug/control + // enable all messages nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt index 44e6bb6ead10..c628788d5b47 100644 --- a/Documentation/efi-stub.txt +++ b/Documentation/efi-stub.txt @@ -20,7 +20,7 @@ The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option. **** How to install bzImage.efi The bzImage located in arch/x86/boot/bzImage must be copied to the EFI -System Partiion (ESP) and renamed with the extension ".efi". Without +System Partition (ESP) and renamed with the extension ".efi". Without the extension the EFI firmware loader will refuse to execute it. It's not possible to execute bzImage.efi from the usual Linux file systems because EFI firmware doesn't have support for them. diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt index 860c29a472ad..e9f5daccbd02 100644 --- a/Documentation/email-clients.txt +++ b/Documentation/email-clients.txt @@ -104,7 +104,7 @@ Then from the "Message" menu item, select insert file and choose your patch. As an added bonus you can customise the message creation toolbar menu and put the "insert file" icon there. -Make the the composer window wide enough so that no lines wrap. As of +Make the composer window wide enough so that no lines wrap. As of KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending the email if the lines wrap in the composer window. Having word wrapping disabled in the Options menu isn't enough. Thus, if your patch has very diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class index 5377f6317961..49c81caef84d 100644 --- a/Documentation/extcon/porting-android-switch-class +++ b/Documentation/extcon/porting-android-switch-class @@ -50,7 +50,7 @@ so that they are still compatible with legacy userspace processes. Extcon's extended features for switch device drivers with complex features usually required magic numbers in state value of switch_dev. With extcon, such magic numbers that - support multiple cables ( + support multiple cables are no more required or supported. 1. Define cable names at edev->supported_cable. 2. (Recommended) remove print_state callback. @@ -114,11 +114,8 @@ exclusive, the two cables cannot be in ATTACHED state simulteneously. ****** ABI Location - If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is -disabled, /sys/class/switch/* are created as symbolic links to -/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates -/sys/class/switch directory, we disable symboling linking if -CONFIG_ANDROID_SWITCH is enabled. + If "CONFIG_ANDROID" is enabled, /sys/class/switch/* are created +as symbolic links to /sys/class/extcon/*. The two files of switch class, name and state, are provided with extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 8042050eb265..632211cbdd56 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -10,24 +10,32 @@ afs.txt - info and examples for the distributed AFS (Andrew File System) fs. affs.txt - info and mount options for the Amiga Fast File System. +autofs4-mount-control.txt + - info on device control operations for autofs4 module. automount-support.txt - information about filesystem automount support. befs.txt - information about the BeOS filesystem for Linux. bfs.txt - info for the SCO UnixWare Boot Filesystem (BFS). +btrfs.txt + - info for the BTRFS filesystem. +caching/ + - directory containing filesystem cache documentation. ceph.txt - - info for the Ceph Distributed File System -cifs.txt - - description of the CIFS filesystem. + - info for the Ceph Distributed File System. +cifs/ + - directory containing CIFS filesystem documentation and example code. coda.txt - description of the CODA filesystem. configfs/ - directory containing configfs documentation and example code. cramfs.txt - info on the cram filesystem for small storage (ROMs etc). -dentry-locking.txt - - info on the RCU-based dcache locking model. +debugfs.txt + - info on the debugfs filesystem. +devpts.txt + - info on the devpts filesystem. directory-locking - info about the locking scheme used for directory operations. dlmfs.txt @@ -35,7 +43,7 @@ dlmfs.txt dnotify.txt - info about directory notification in Linux. dnotify_test.c - - example program for dnotify + - example program for dnotify. ecryptfs.txt - docs on eCryptfs: stacked cryptographic filesystem for Linux. efivarfs.txt @@ -48,12 +56,18 @@ ext3.txt - info, mount options and specifications for the Ext3 filesystem. ext4.txt - info, mount options and specifications for the Ext4 filesystem. -files.txt - - info on file management in the Linux kernel. f2fs.txt - info and mount options for the F2FS filesystem. +fiemap.txt + - info on fiemap ioctl. +files.txt + - info on file management in the Linux kernel. fuse.txt - info on the Filesystem in User SpacE including mount options. +gfs2-glocks.txt + - info on the Global File System 2 - Glock internal locking rules. +gfs2-uevents.txt + - info on the Global File System 2 - uevents. gfs2.txt - info on the Global File System 2. hfs.txt @@ -84,40 +98,58 @@ ntfs.txt - info and mount options for the NTFS filesystem (Windows NT). ocfs2.txt - info and mount options for the OCFS2 clustered filesystem. +omfs.txt + - info on the Optimized MPEG FileSystem. +path-lookup.txt + - info on path walking and name lookup locking. +pohmelfs/ + - directory containing pohmelfs filesystem documentation. porting - various information on filesystem porting. proc.txt - info on Linux's /proc filesystem. +qnx6.txt + - info on the QNX6 filesystem. +quota.txt + - info on Quota subsystem. ramfs-rootfs-initramfs.txt - info on the 'in memory' filesystems ramfs, rootfs and initramfs. -reiser4.txt - - info on the Reiser4 filesystem based on dancing tree algorithms. relay.txt - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. seq_file.txt - - how to use the seq_file API + - how to use the seq_file API. sharedsubtree.txt - a description of shared subtrees for namespaces. spufs.txt - info and mount options for the SPU filesystem used on Cell. +squashfs.txt + - info on the squashfs filesystem. sysfs-pci.txt - info on accessing PCI device resources through sysfs. +sysfs-tagging.txt + - info on sysfs tagging to avoid duplicates. sysfs.txt - info on sysfs, a ram-based filesystem for exporting kernel objects. sysv-fs.txt - info on the SystemV/V7/Xenix/Coherent filesystem. tmpfs.txt - info on tmpfs, a filesystem that holds all files in virtual memory. +ubifs.txt + - info on the Unsorted Block Images FileSystem. udf.txt - info and mount options for the UDF filesystem. ufs.txt - info on the ufs filesystem. vfat.txt - - info on using the VFAT filesystem used in Windows NT and Windows 95 + - info on using the VFAT filesystem used in Windows NT and Windows 95. vfs.txt - - overview of the Virtual File System + - overview of the Virtual File System. +xfs-delayed-logging-design.txt + - info on the XFS Delayed Logging Design. +xfs-self-describing-metadata.txt + - info on XFS Self Describing Metadata. xfs.txt - info and mount options for the XFS filesystem. xip.txt diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index fe7afe225381..5b0c083d7c0e 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -544,7 +544,7 @@ like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in -acces_process_vm(), typically used to debug a process through +access_process_vm(), typically used to debug a process through /proc/pid/mem or ptrace. This function is needed only for VM_IO | VM_PFNMAP VMAs. diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index a3fe811bbdbc..b8d284975f0f 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -120,6 +120,8 @@ active_logs=%u Support configuring the number of active logs. In the disable_ext_identify Disable the extension list configured by mkfs, so f2fs does not aware of cold files such as media files. inline_xattr Enable the inline xattrs feature. +inline_data Enable the inline data feature: New created small(<~3.4k) + files can be written into inode block. ================================================================================ DEBUGFS ENTRIES @@ -171,6 +173,28 @@ Files in /sys/fs/f2fs/<devname> conduct checkpoint to reclaim the prefree segments to free segments. By default, 100 segments, 200MB. + max_small_discards This parameter controls the number of discard + commands that consist small blocks less than 2MB. + The candidates to be discarded are cached until + checkpoint is triggered, and issued during the + checkpoint. By default, it is disabled with 0. + + ipu_policy This parameter controls the policy of in-place + updates in f2fs. There are five policies: + 0: F2FS_IPU_FORCE, 1: F2FS_IPU_SSR, + 2: F2FS_IPU_UTIL, 3: F2FS_IPU_SSR_UTIL, + 4: F2FS_IPU_DISABLE. + + min_ipu_util This parameter controls the threshold to trigger + in-place-updates. The number indicates percentage + of the filesystem utilization, and used by + F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. + + max_victim_search This parameter controls the number of trials to + find a victim segment when conducting SSR and + cleaning operations. The default value is 4096 + which covers 8GB block address range. + ================================================================================ USAGE ================================================================================ diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt index 873a2ab2e9f8..06887d46ccf2 100644 --- a/Documentation/filesystems/nilfs2.txt +++ b/Documentation/filesystems/nilfs2.txt @@ -81,6 +81,62 @@ nodiscard(*) The discard/TRIM commands are sent to the underlying block device when blocks are freed. This is useful for SSD devices and sparse/thinly-provisioned LUNs. +Ioctls +====== + +There is some NILFS2 specific functionality which can be accessed by applications +through the system call interfaces. The list of all NILFS2 specific ioctls are +shown in the table below. + +Table of NILFS2 specific ioctls +.............................................................................. + Ioctl Description + NILFS_IOCTL_CHANGE_CPMODE Change mode of given checkpoint between + checkpoint and snapshot state. This ioctl is + used in chcp and mkcp utilities. + + NILFS_IOCTL_DELETE_CHECKPOINT Remove checkpoint from NILFS2 file system. + This ioctl is used in rmcp utility. + + NILFS_IOCTL_GET_CPINFO Return info about requested checkpoints. This + ioctl is used in lscp utility and by + nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_CPSTAT Return checkpoints statistics. This ioctl is + used by lscp, rmcp utilities and by + nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_SUINFO Return segment usage info about requested + segments. This ioctl is used in lssu, + nilfs_resize utilities and by nilfs_cleanerd + daemon. + + NILFS_IOCTL_GET_SUSTAT Return segment usage statistics. This ioctl + is used in lssu, nilfs_resize utilities and + by nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_VINFO Return information on virtual block addresses. + This ioctl is used by nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_BDESCS Return information about descriptors of disk + block numbers. This ioctl is used by + nilfs_cleanerd daemon. + + NILFS_IOCTL_CLEAN_SEGMENTS Do garbage collection operation in the + environment of requested parameters from + userspace. This ioctl is used by + nilfs_cleanerd daemon. + + NILFS_IOCTL_SYNC Make a checkpoint. This ioctl is used in + mkcp utility. + + NILFS_IOCTL_RESIZE Resize NILFS2 volume. This ioctl is used + by nilfs_resize utility. + + NILFS_IOCTL_SET_ALLOC_RANGE Define lower limit of segments in bytes and + upper limit of segments in bytes. This ioctl + is used by nilfs_resize utility. + NILFS2 usage ============ diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 22d89aa37218..31f76178c987 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -547,7 +547,7 @@ Table 1-5: Kernel info in /proc sys See chapter 2 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4) tty Info of tty drivers - uptime System uptime + uptime Wall clock since boot, combined idle time of all cpus version Kernel version video bttv info of video resources (2.4) vmallocinfo Show vmalloced areas @@ -767,6 +767,7 @@ The "Locked" indicates whether the mapping is locked in memory or not. MemTotal: 16344972 kB MemFree: 13634064 kB +MemAvailable: 14836172 kB Buffers: 3656 kB Cached: 1195708 kB SwapCached: 0 kB @@ -799,6 +800,14 @@ AnonHugePages: 49152 kB MemTotal: Total usable ram (i.e. physical ram minus a few reserved bits and the kernel binary code) MemFree: The sum of LowFree+HighFree +MemAvailable: An estimate of how much memory is available for starting new + applications, without swapping. Calculated from MemFree, + SReclaimable, the size of the file LRU lists, and the low + watermarks in each zone. + The estimate takes into account that the system needs some + page cache to function well, and that not all reclaimable + slab will be reclaimable, due to items being in use. The + impact of those factors will vary from system to system. Buffers: Relatively temporary storage for raw disk blocks shouldn't get tremendously large (20MB or so) Cached: in-memory cache for files read from the disk (the diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index a6619b7064b9..b35a64b82f9e 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -108,12 +108,12 @@ static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo); is equivalent to doing: static struct device_attribute dev_attr_foo = { - .attr = { + .attr = { .name = "foo", .mode = S_IWUSR | S_IRUGO, - .show = show_foo, - .store = store_foo, }, + .show = show_foo, + .store = store_foo, }; diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 0d03506f2cc5..ba169faad5c6 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -72,10 +72,11 @@ where - chip_label is the label of the gpiod_chip instance providing the GPIO - chip_hwnum is the hardware number of the GPIO within the chip - - dev_id is the identifier of the device that will make use of this GPIO. If - NULL, the GPIO will be available to all devices. + - dev_id is the identifier of the device that will make use of this GPIO. It + can be NULL, in which case it will be matched for calls to gpiod_get() + with a NULL device. - con_id is the name of the GPIO function from the device point of view. It - can be NULL. + can be NULL, in which case it will match any function. - idx is the index of the GPIO within the function. - flags is defined to specify the following properties: * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low @@ -86,18 +87,23 @@ In the future, these flags might be extended to support more properties. Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0. -A lookup table can then be defined as follows: +A lookup table can then be defined as follows, with an empty entry defining its +end: - struct gpiod_lookup gpios_table[] = { - GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW), - }; +struct gpiod_lookup_table gpios_table = { + .dev_id = "foo.0", + .table = { + GPIO_LOOKUP_IDX("gpio.0", 15, "led", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 16, "led", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 17, "led", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio.0", 1, "power", GPIO_ACTIVE_LOW), + { }, + }, +}; And the table can be added by the board code as follows: - gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table)); + gpiod_add_lookup_table(&gpios_table); The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index 07c74a3765a0..e42f77d8d4ca 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -38,7 +38,11 @@ device that displays digits), an additional index argument can be specified: const char *con_id, unsigned int idx) Both functions return either a valid GPIO descriptor, or an error code checkable -with IS_ERR(). They will never return a NULL pointer. +with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned +if and only if no GPIO has been assigned to the device/function/index triplet, +other error codes are used for cases where a GPIO has been assigned but an error +occured while trying to acquire it. This is useful to discriminate between mere +errors and an absence of GPIO for optional GPIO parameters. Device-managed variants of these functions are also defined: diff --git a/Documentation/i2c/fault-codes b/Documentation/i2c/fault-codes index 045765c0b9b5..47c25abb7d52 100644 --- a/Documentation/i2c/fault-codes +++ b/Documentation/i2c/fault-codes @@ -64,9 +64,6 @@ EINVAL detected before any I/O operation was started. Use a more specific fault code when you can. - One example would be a driver trying an SMBus Block Write - with block size outside the range of 1-32 bytes. - EIO This rather vague error means something went wrong when performing an I/O operation. Use a more specific fault diff --git a/Documentation/input/gamepad.txt b/Documentation/input/gamepad.txt index 31bb6a4029ef..3f6d8a5e9cdc 100644 --- a/Documentation/input/gamepad.txt +++ b/Documentation/input/gamepad.txt @@ -68,7 +68,7 @@ features that you need, first. How each feature is mapped is described below. Legacy drivers often don't comply to these rules. As we cannot change them for backwards-compatibility reasons, you need to provide fixup mappings in user-space yourself. Some of them might also provide module-options that -change the mappings so you can adivce users to set these. +change the mappings so you can advise users to set these. All new gamepads are supposed to comply with this mapping. Please report any bugs, if they don't. @@ -150,10 +150,10 @@ Menu-Pad: BTN_START Many pads also have a third button which is branded or has a special symbol and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo - "HOME" button, the XBox "X"-button or Sony "P" button. + "HOME" button, the XBox "X"-button or Sony "PS" button. Rumble: - Rumble is adverticed as FF_RUMBLE. + Rumble is advertised as FF_RUMBLE. ---------------------------------------------------------------------------- Written 2013 by David Herrmann <dh.herrmann@gmail.com> diff --git a/Documentation/input/joystick-api.txt b/Documentation/input/joystick-api.txt index c507330740cd..943b18eac918 100644 --- a/Documentation/input/joystick-api.txt +++ b/Documentation/input/joystick-api.txt @@ -16,14 +16,14 @@ joystick. By default, the device is opened in blocking mode. - int fd = open ("/dev/js0", O_RDONLY); + int fd = open ("/dev/input/js0", O_RDONLY); 2. Event Reading ~~~~~~~~~~~~~~~~ struct js_event e; - read (fd, &e, sizeof(struct js_event)); + read (fd, &e, sizeof(e)); where js_event is defined as @@ -34,8 +34,8 @@ where js_event is defined as __u8 number; /* axis/button number */ }; -If the read is successful, it will return sizeof(struct js_event), unless -you wanted to read more than one event per read as described in section 3.1. +If the read is successful, it will return sizeof(e), unless you wanted to read +more than one event per read as described in section 3.1. 2.1 js_event.type @@ -99,9 +99,9 @@ may work well if you handle JS_EVENT_INIT events separately, if ((js_event.type & ~JS_EVENT_INIT) == JS_EVENT_BUTTON) { if (js_event.value) - buttons_state |= (1 << js_event.number); - else - buttons_state &= ~(1 << js_event.number); + buttons_state |= (1 << js_event.number); + else + buttons_state &= ~(1 << js_event.number); } is much safer since it can't lose sync with the driver. As you would @@ -144,14 +144,14 @@ all events on the queue (that is, until you get a -1). For example, while (1) { - while (read (fd, &e, sizeof(struct js_event)) > 0) { - process_event (e); - } - /* EAGAIN is returned when the queue is empty */ - if (errno != EAGAIN) { - /* error */ - } - /* do something interesting with processed events */ + while (read (fd, &e, sizeof(e)) > 0) { + process_event (e); + } + /* EAGAIN is returned when the queue is empty */ + if (errno != EAGAIN) { + /* error */ + } + /* do something interesting with processed events */ } One reason for emptying the queue is that if it gets full you'll start @@ -181,7 +181,7 @@ at a time using the typical read(2) functionality. For that, you would replace the read above with something like struct js_event mybuffer[0xff]; - int i = read (fd, mybuffer, sizeof(struct mybuffer)); + int i = read (fd, mybuffer, sizeof(mybuffer)); In this case, read would return -1 if the queue was empty, or some other value in which the number of events read would be i / @@ -269,9 +269,9 @@ The driver offers backward compatibility, though. Here's a quick summary: struct JS_DATA_TYPE js; while (1) { if (read (fd, &js, JS_RETURN) != JS_RETURN) { - /* error */ - } - usleep (1000); + /* error */ + } + usleep (1000); } As you can figure out from the example, the read returns immediately, diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 304262bb661a..8d027dc86c1f 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -116,7 +116,7 @@ your needs: For testing the joystick driver functionality, there is the jstest program in the utilities package. You run it by typing: - jstest /dev/js0 + jstest /dev/input/js0 And it should show a line with the joystick values, which update as you move the stick, and press its buttons. The axes should all be zero when the @@ -136,7 +136,7 @@ joystick should be autocalibrated by the driver automagically. However, with some analog joysticks, that either do not use linear resistors, or if you want better precision, you can use the jscal program - jscal -c /dev/js0 + jscal -c /dev/input/js0 included in the joystick package to set better correction coefficients than what the driver would choose itself. @@ -145,7 +145,7 @@ what the driver would choose itself. calibration using the jstest command, and if you do, you then can save the correction coefficients into a file - jscal -p /dev/js0 > /etc/joystick.cal + jscal -p /dev/input/js0 > /etc/joystick.cal And add a line to your rc script executing that file @@ -556,7 +556,7 @@ interface, and "old" for the "0.x" interface. You run it by typing: 5. FAQ ~~~~~~ -Q: Running 'jstest /dev/js0' results in "File not found" error. What's the +Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the cause? A: The device files don't exist. Create them (see section 2.2). diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt index 473e43b2d588..5ca78426f54c 100644 --- a/Documentation/io-mapping.txt +++ b/Documentation/io-mapping.txt @@ -38,7 +38,7 @@ maps are more efficient: void io_mapping_unmap_atomic(void *vaddr) - 'vaddr' must be the the value returned by the last + 'vaddr' must be the value returned by the last io_mapping_map_atomic_wc call. This unmaps the specified page and allows the task to sleep once again. diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index 8148a47fc70e..0091a8215ac1 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -149,7 +149,7 @@ linux-api@ver.kernel.org に送ることを勧めます。 この他にパッチを作る方法についてのよくできた記述は- "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt "Linux kernel patch submission format" http://linux.yyz.us/patch-format.html @@ -622,7 +622,7 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ ントの ChangeLog セクションを見てください- "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b9e9bd854298..be6ba33d4ff1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -343,6 +343,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. no: ACPI OperationRegions are not marked as reserved, no further checks are performed. + acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump + kernels. + add_efi_memmap [EFI; X86] Include EFI memory map in kernel's map of available physical RAM. @@ -463,6 +466,22 @@ bytes respectively. Such letter suffixes can also be entirely omitted. atkbd.softrepeat= [HW] Use software keyboard repeat + audit= [KNL] Enable the audit sub-system + Format: { "0" | "1" } (0 = disabled, 1 = enabled) + 0 - kernel audit is disabled and can not be enabled + until the next reboot + unset - kernel audit is initialized but disabled and + will be fully enabled by the userspace auditd. + 1 - kernel audit is initialized and partially enabled, + storing at most audit_backlog_limit messages in + RAM until it is fully enabled by the userspace + auditd. + Default: unset + + audit_backlog_limit= [KNL] Set the audit queue size limit. + Format: <int> (must be >=0) + Default: 64 + baycom_epp= [HW,AX25] Format: <io>,<mode> @@ -515,7 +534,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. cgroup_disable= [KNL] Disable a particular controller Format: {name of the controller(s) to disable} - {Currently supported controllers - "memory"} + The effects of cgroup_disable=foo are: + - foo isn't auto-mounted if you mount all cgroups in + a single hierarchy + - foo isn't visible as an individually mountable + subsystem + {Currently only "memory" controller deal with this and + cut the overhead, others just disable the usage. So + only cgroup_disable=memory is actually worthy} checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } @@ -774,6 +800,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. disable= [IPV6] See Documentation/networking/ipv6.txt. + disable_cpu_apicid= [X86,APIC,SMP] + Format: <int> + The number of initial APIC ID for the + corresponding CPU to be disabled at boot, + mostly used for the kdump 2nd kernel to + disable BSP to wake up multiple CPUs without + causing system reset or hang due to sending + INIT from AP to BSP. + disable_ddw [PPC/PSERIES] Disable Dynamic DMA Window support. Use this if to workaround buggy firmware. @@ -881,6 +916,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. The xen output can only be used by Xen PV guests. + edac_report= [HW,EDAC] Control how to report EDAC event + Format: {"on" | "off" | "force"} + on: enable EDAC to report H/W event. May be overridden + by other higher priority error reporting module. + off: disable H/W event reporting through EDAC. + force: enforce the use of EDAC to report H/W event. + default: on. + ekgdboc= [X86,KGDB] Allow early kernel console debugging ekgdboc=kbd @@ -890,6 +933,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. edd= [EDD] Format: {"off" | "on" | "skip[mbr]"} + efi= [EFI] + Format: { "old_map" } + old_map [X86-64]: switch to the old ioremap-based EFI + runtime services mapping. 32-bit still uses this one by + default. + efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of your efi variable storage. Use this parameter only if @@ -1013,7 +1062,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. debugfs files are removed at module unload time. gpt [EFI] Forces disk with valid GPT signature but - invalid Protective MBR to be treated as GPT. + invalid Protective MBR to be treated as GPT. If the + primary GPT is corrupted, it enables the backup/alternate + GPT to be used instead. grcan.enable0= [HW] Configuration of physical interface 0. Determines the "Enable 0" bit of the configuration register. @@ -1415,6 +1466,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Valid arguments: on, off Default: on + kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode + Valid arguments: 0, 1, 2 + kmemcheck=0 (disabled) + kmemcheck=1 (enabled) + kmemcheck=2 (one-shot mode) + Default: 2 (one-shot mode) + kstack=N [X86] Print N words from the kernel stack in oops dumps. @@ -1994,6 +2052,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noapic [SMP,APIC] Tells the kernel to not make use of any IOAPICs that may be present in the system. + nokaslr [X86] + Disable kernel base offset ASLR (Address Space + Layout Randomization) if built into the kernel. + noautogroup Disable scheduler automatic task group creation. nobats [PPC] Do not use BATs for mapping kernel lowmem @@ -2627,7 +2689,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. for RCU-preempt, and "s" for RCU-sched, and "N" is the CPU number. This reduces OS jitter on the offloaded CPUs, which can be useful for HPC and - real-time workloads. It can also improve energy efficiency for asymmetric multiprocessors. @@ -2643,8 +2704,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. periodically wake up to do the polling. rcutree.blimit= [KNL] - Set maximum number of finished RCU callbacks to process - in one batch. + Set maximum number of finished RCU callbacks to + process in one batch. rcutree.rcu_fanout_leaf= [KNL] Increase the number of CPUs assigned to each @@ -2663,8 +2724,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. value is one, and maximum value is HZ. rcutree.qhimark= [KNL] - Set threshold of queued - RCU callbacks over which batch limiting is disabled. + Set threshold of queued RCU callbacks beyond which + batch limiting is disabled. rcutree.qlowmark= [KNL] Set threshold of queued RCU callbacks below which diff --git a/Documentation/kmsg/s390/zcrypt b/Documentation/kmsg/s390/zcrypt new file mode 100644 index 000000000000..7fb2087409d6 --- /dev/null +++ b/Documentation/kmsg/s390/zcrypt @@ -0,0 +1,20 @@ +/*? + * Text: "Cryptographic device %x failed and was set offline\n" + * Severity: Error + * Parameter: + * @1: device index + * Description: + * A cryptographic device failed to process a cryptographic request. + * The cryptographic device driver could not correct the error and + * set the device offline. The application that issued the + * request received an indication that the request has failed. + * User action: + * Use the lszcrypt command to confirm that the cryptographic + * hardware is still configured to your LPAR or z/VM guest virtual + * machine. If the device is available to your Linux instance the + * command output contains a line that begins with 'card<device index>', + * where <device index> is the two-digit decimal number in the message text. + * After ensuring that the device is available, use the chzcrypt command to + * set it online again. + * If the error persists, contact your support organization. + */ diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index 680e64635958..dc2ff8f611e0 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -122,7 +122,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다. 올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다. "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt "Linux kernel patch submission format" http://linux.yyz.us/patch-format.html @@ -213,7 +213,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 것은 Linux Cross-Reference project이며 그것은 자기 참조 방식이며 소스코드를 인덱스된 웹 페이지들의 형태로 보여준다. 최신의 멋진 커널 코드 저장소는 다음을 통하여 참조할 수 있다. - http://users.sosdg.org/~qiyong/lxr/ + http://lxr.linux.no/+trees 개발 프로세스 @@ -222,20 +222,20 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 리눅스 커널 개발 프로세스는 현재 몇몇 다른 메인 커널 "브랜치들"과 서브시스템에 특화된 커널 브랜치들로 구성된다. 몇몇 다른 메인 브랜치들은 다음과 같다. - - main 2.6.x 커널 트리 - - 2.6.x.y - 안정된 커널 트리 - - 2.6.x -git 커널 패치들 - - 2.6.x -mm 커널 패치들 + - main 3.x 커널 트리 + - 3.x.y - 안정된 커널 트리 + - 3.x -git 커널 패치들 - 서브시스템을 위한 커널 트리들과 패치들 + - 3.x - 통합 테스트를 위한 next 커널 트리 -2.6.x 커널 트리 +3.x 커널 트리 --------------- -2.6.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v2.6/ +3.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v3.x/ 디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다. - 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은 메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은 - 몇 주 동안 -mm 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데 + 몇 주 동안 -next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/ 에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내는 것도 무관하다. @@ -262,20 +262,20 @@ Andrew Morton의 글이 있다. 버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라 배포되는 것은 아니기 때문이다." -2.6.x.y - 안정 커널 트리 +3.x.y - 안정 커널 트리 ------------------------ -4 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 2.6.x +3 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 3.x 커널에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한 수정들을 포함한다. 이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며, 개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다. -어떤 2.6.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 2.6.x +어떤 3.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 3.x 커널이 현재의 안정 커널이다. -2.6.x.y는 "stable" 팀<stable@kernel.org>에 의해 관리되며 거의 매번 격주로 +3.x.y는 "stable" 팀<stable@vger.kernel.org>에 의해 관리되며 거의 매번 격주로 배포된다. 커널 트리 문서들 내에 Documentation/stable_kernel_rules.txt 파일은 어떤 @@ -283,84 +283,46 @@ Andrew Morton의 글이 있다. 진행되는지를 설명한다. -2.6.x -git 패치들 +3.x -git 패치들 ------------------ git 저장소(그러므로 -git이라는 이름이 붙음)에는 날마다 관리되는 Linus의 커널 트리의 snapshot 들이 있다. 이 패치들은 일반적으로 날마다 배포되며 Linus의 트리의 현재 상태를 나타낸다. 이 패치들은 정상적인지 조금도 살펴보지 않고 자동적으로 생성된 것이므로 -rc 커널들 보다도 더 실험적이다. -2.6.x -mm 커널 패치들 ---------------------- -Andrew Morton에 의해 배포된 실험적인 커널 패치들이다. Andrew는 모든 다른 -서브시스템 커널 트리와 패치들을 가져와서 리눅스 커널 메일링 리스트로 -온 많은 패치들과 한데 묶는다. 이 트리는 새로운 기능들과 패치들을 위한 -장소를 제공하는 역할을 한다. 하나의 패치가 -mm에 한동안 있으면서 그 가치가 -증명되게 되면 Andrew나 서브시스템 메인테이너는 그것을 메인라인에 포함시키기 -위하여 Linus에게 보낸다. - -커널 트리에 포함하고 싶은 모든 새로운 패치들은 Linus에게 보내지기 전에 --mm 트리에서 테스트를 하는 것을 적극 추천한다. - -이 커널들은 안정되게 사용할 시스템에서에 실행하는 것은 적합하지 않으며 -다른 브랜치들의 어떤 것들보다 위험하다. - -여러분이 커널 개발 프로세스를 돕길 원한다면 이 커널 배포들을 사용하고 -테스트한 후 어떤 문제를 발견하거나 또는 모든 것이 잘 동작한다면 리눅스 -커널 메일링 리스트로 피드백을 해달라. - -이 커널들은 일반적으로 모든 다른 실험적인 패치들과 배포될 당시의 -사용가능한 메인라인 -git 커널들의 몇몇 변경을 포함한다. - --mm 커널들은 정해진 일정대로 배포되지 않는다. 하지만 대개 몇몇 -mm 커널들은 -각 -rc 커널(1부터 3이 흔함) 사이에서 배포된다. - 서브시스템 커널 트리들과 패치들 ------------------------------- -많은 다른 커널 서브시스템 개발자들은 커널의 다른 부분들에서 무슨 일이 -일어나고 있는지를 볼수 있도록 그들의 개발 트리를 공개한다. 이 트리들은 -위에서 설명하였던 것 처럼 -mm 커널 배포들로 합쳐진다. - -다음은 활용가능한 커널 트리들을 나열한다. - git trees: - - Kbuild development tree, Sam Ravnborg < sam@ravnborg.org> - git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git - - - ACPI development tree, Len Brown <len.brown@intel.com > - git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git - - - Block development tree, Jens Axboe <jens.axboe@oracle.com> - git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git - - - DRM development tree, Dave Airlie <airlied@linux.ie> - git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git - - - ia64 development tree, Tony Luck < tony.luck@intel.com> - git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git - - - infiniband, Roland Dreier <rolandd@cisco.com > - git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git - - - libata, Jeff Garzik <jgarzik@pobox.com> - git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git - - - network drivers, Jeff Garzik <jgarzik@pobox.com> - git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git - - - pcmcia, Dominik Brodowski < linux@dominikbrodowski.net> - git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git - - - SCSI, James Bottomley < James.Bottomley@SteelEye.com> - git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git - - quilt trees: - - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman < gregkh@linuxfoundation.org> - kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ - - x86-64, partly i386, Andi Kleen < ak@suse.de> - ftp.firstfloor.org:/pub/ak/x86_64/quilt/ - - 다른 커널 트리들은 http://kernel.org/git와 MAINTAINERS 파일에서 참조할 수 - 있다. +다양한 커널 서브시스템의 메인테이너들 --- 그리고 많은 커널 서브시스템 개발자들 +--- 은 그들의 현재 개발 상태를 소스 저장소로 노출한다. 이를 통해 다른 사람들도 +커널의 다른 영역에 어떤 변화가 이루어지고 있는지 알 수 있다. 급속히 개발이 +진행되는 영역이 있고 그렇지 않은 영역이 있으므로, 개발자는 다른 개발자가 제출한 +수정 사항과 자신의 수정사항의 충돌이나 동일한 일을 동시에 두사람이 따로 +진행하는 사태를 방지하기 위해 급속히 개발이 진행되고 있는 영역에 작업의 +베이스를 맞춰줄 것이 요구된다. + +대부분의 이러한 저장소는 git 트리지만, git이 아닌 SCM으로 관리되거나, quilt +시리즈로 제공되는 패치들도 존재한다. 이러한 서브시스템 저장소들은 MAINTAINERS +파일에 나열되어 있다. 대부분은 http://git.kernel.org 에서 볼 수 있다. + +제안된 패치는 서브시스템 트리에 커밋되기 전에 메일링 리스트를 통해 +리뷰된다(아래의 관련 섹션을 참고하기 바란다). 일부 커널 서브시스템의 경우, 이 +리뷰 프로세스는 patchwork라는 도구를 통해 추적된다. patchwork은 등록된 패치와 +패치에 대한 코멘트, 패치의 버전을 볼 수 있는 웹 인터페이스를 제공하고, +메인테이너는 패치를 리뷰 중, 리뷰 통과, 또는 반려됨으로 표시할 수 있다. +대부분의 이러한 patchwork 사이트는 http://patchwork.kernel.org/ 또는 +http://patchwork.ozlabs.org/ 에 나열되어 있다. + +3.x - 통합 테스트를 위한 next 커널 트리 +----------------------------------------- +서브시스템 트리들의 변경사항들은 mainline 3.x 트리로 들어오기 전에 통합 +테스트를 거쳐야 한다. 이런 목적으로, 모든 서브시스템 트리의 변경사항을 거의 +매일 받아가는 특수한 테스트 저장소가 존재한다: + http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git + http://linux.f-seidel.de/linux-next/pmwiki/ + +이런 식으로, -next 커널을 통해 다음 머지 기간에 메인라인 커널에 어떤 변경이 +가해질 것인지 간략히 알 수 있다. 모험심 강한 테스터라면 -next 커널에서 테스트를 +수행하는 것도 좋을 것이다. 버그 보고 --------- @@ -597,7 +559,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라. "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index c5182bb2c16c..f87241dfed87 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -342,7 +342,10 @@ kset use: When you are finished with the kset, call: void kset_unregister(struct kset *kset); -to destroy it. +to destroy it. This removes the kset from sysfs and decrements its reference +count. When the reference count goes to zero, the kset will be released. +Because other references to the kset may still exist, the release may happen +after kset_unregister() returns. An example of using a kset can be seen in the samples/kobject/kset-example.c file in the kernel tree. diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c index a4a8fc5d05d4..b85dbbac0499 100644 --- a/Documentation/laptops/hpfall.c +++ b/Documentation/laptops/hpfall.c @@ -29,7 +29,7 @@ int set_unload_heads_path(char *device) return -EINVAL; strncpy(devname, device + 5, sizeof(devname)); - snprintf(unload_heads_path, sizeof(unload_heads_path), + snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, "/sys/block/%s/device/unload_heads", devname); return 0; } diff --git a/Documentation/md.txt b/Documentation/md.txt index fbb2fcbf16b6..f925666e4342 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -533,7 +533,7 @@ also have found. The count in 'mismatch_cnt' is the number of sectors that were re-written, or (for 'check') would have been re-written. As most raid levels work in units of pages rather - than sectors, this my be larger than the number of actual errors + than sectors, this may be larger than the number of actual errors by a factor of the number of sectors in a page. bitmap_set_bits diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index c8c42e64e953..102dc19c4119 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -194,18 +194,22 @@ There are some minimal guarantees that may be expected of a CPU: (*) On any given CPU, dependent memory accesses will be issued in order, with respect to itself. This means that for: - Q = P; D = *Q; + ACCESS_ONCE(Q) = P; smp_read_barrier_depends(); D = ACCESS_ONCE(*Q); the CPU will issue the following memory operations: Q = LOAD P, D = LOAD *Q - and always in that order. + and always in that order. On most systems, smp_read_barrier_depends() + does nothing, but it is required for DEC Alpha. The ACCESS_ONCE() + is required to prevent compiler mischief. Please note that you + should normally use something like rcu_dereference() instead of + open-coding smp_read_barrier_depends(). (*) Overlapping loads and stores within a particular CPU will appear to be ordered within that CPU. This means that for: - a = *X; *X = b; + a = ACCESS_ONCE(*X); ACCESS_ONCE(*X) = b; the CPU will only issue the following sequence of memory operations: @@ -213,7 +217,7 @@ There are some minimal guarantees that may be expected of a CPU: And for: - *X = c; d = *X; + ACCESS_ONCE(*X) = c; d = ACCESS_ONCE(*X); the CPU will only issue: @@ -224,6 +228,12 @@ There are some minimal guarantees that may be expected of a CPU: And there are a number of things that _must_ or _must_not_ be assumed: + (*) It _must_not_ be assumed that the compiler will do what you want with + memory references that are not protected by ACCESS_ONCE(). Without + ACCESS_ONCE(), the compiler is within its rights to do all sorts + of "creative" transformations, which are covered in the Compiler + Barrier section. + (*) It _must_not_ be assumed that independent loads and stores will be issued in the order given. This means that for: @@ -371,33 +381,44 @@ Memory barriers come in four basic varieties: And a couple of implicit varieties: - (5) LOCK operations. + (5) ACQUIRE operations. This acts as a one-way permeable barrier. It guarantees that all memory - operations after the LOCK operation will appear to happen after the LOCK - operation with respect to the other components of the system. + operations after the ACQUIRE operation will appear to happen after the + ACQUIRE operation with respect to the other components of the system. + ACQUIRE operations include LOCK operations and smp_load_acquire() + operations. - Memory operations that occur before a LOCK operation may appear to happen - after it completes. + Memory operations that occur before an ACQUIRE operation may appear to + happen after it completes. - A LOCK operation should almost always be paired with an UNLOCK operation. + An ACQUIRE operation should almost always be paired with a RELEASE + operation. - (6) UNLOCK operations. + (6) RELEASE operations. This also acts as a one-way permeable barrier. It guarantees that all - memory operations before the UNLOCK operation will appear to happen before - the UNLOCK operation with respect to the other components of the system. + memory operations before the RELEASE operation will appear to happen + before the RELEASE operation with respect to the other components of the + system. RELEASE operations include UNLOCK operations and + smp_store_release() operations. - Memory operations that occur after an UNLOCK operation may appear to + Memory operations that occur after a RELEASE operation may appear to happen before it completes. - LOCK and UNLOCK operations are guaranteed to appear with respect to each - other strictly in the order specified. + The use of ACQUIRE and RELEASE operations generally precludes the need + for other sorts of memory barrier (but note the exceptions mentioned in + the subsection "MMIO write barrier"). In addition, a RELEASE+ACQUIRE + pair is -not- guaranteed to act as a full memory barrier. However, after + an ACQUIRE on a given variable, all memory accesses preceding any prior + RELEASE on that same variable are guaranteed to be visible. In other + words, within a given variable's critical section, all accesses of all + previous critical sections for that variable are guaranteed to have + completed. - The use of LOCK and UNLOCK operations generally precludes the need for - other sorts of memory barrier (but note the exceptions mentioned in the - subsection "MMIO write barrier"). + This means that ACQUIRE acts as a minimal "acquire" operation and + RELEASE acts as a minimal "release" operation. Memory barriers are only required where there's a possibility of interaction @@ -450,14 +471,14 @@ The usage requirements of data dependency barriers are a little subtle, and it's not always obvious that they're needed. To illustrate, consider the following sequence of events: - CPU 1 CPU 2 - =============== =============== + CPU 1 CPU 2 + =============== =============== { A == 1, B == 2, C = 3, P == &A, Q == &C } B = 4; <write barrier> - P = &B - Q = P; - D = *Q; + ACCESS_ONCE(P) = &B + Q = ACCESS_ONCE(P); + D = *Q; There's a clear data dependency here, and it would seem that by the end of the sequence, Q must be either &A or &B, and that: @@ -477,15 +498,15 @@ Alpha). To deal with this, a data dependency barrier or better must be inserted between the address load and the data load: - CPU 1 CPU 2 - =============== =============== + CPU 1 CPU 2 + =============== =============== { A == 1, B == 2, C = 3, P == &A, Q == &C } B = 4; <write barrier> - P = &B - Q = P; - <data dependency barrier> - D = *Q; + ACCESS_ONCE(P) = &B + Q = ACCESS_ONCE(P); + <data dependency barrier> + D = *Q; This enforces the occurrence of one of the two implications, and prevents the third possibility from arising. @@ -500,25 +521,26 @@ odd-numbered bank is idle, one can see the new value of the pointer P (&B), but the old value of the variable B (2). -Another example of where data dependency barriers might by required is where a +Another example of where data dependency barriers might be required is where a number is read from memory and then used to calculate the index for an array access: - CPU 1 CPU 2 - =============== =============== + CPU 1 CPU 2 + =============== =============== { M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 } M[1] = 4; <write barrier> - P = 1 - Q = P; - <data dependency barrier> - D = M[Q]; + ACCESS_ONCE(P) = 1 + Q = ACCESS_ONCE(P); + <data dependency barrier> + D = M[Q]; -The data dependency barrier is very important to the RCU system, for example. -See rcu_dereference() in include/linux/rcupdate.h. This permits the current -target of an RCU'd pointer to be replaced with a new modified target, without -the replacement target appearing to be incompletely initialised. +The data dependency barrier is very important to the RCU system, +for example. See rcu_assign_pointer() and rcu_dereference() in +include/linux/rcupdate.h. This permits the current target of an RCU'd +pointer to be replaced with a new modified target, without the replacement +target appearing to be incompletely initialised. See also the subsection on "Cache Coherency" for a more thorough example. @@ -530,24 +552,190 @@ A control dependency requires a full read memory barrier, not simply a data dependency barrier to make it work correctly. Consider the following bit of code: - q = &a; - if (p) { - <data dependency barrier> - q = &b; + q = ACCESS_ONCE(a); + if (q) { + <data dependency barrier> /* BUG: No data dependency!!! */ + p = ACCESS_ONCE(b); } - x = *q; This will not have the desired effect because there is no actual data -dependency, but rather a control dependency that the CPU may short-circuit by -attempting to predict the outcome in advance. In such a case what's actually -required is: +dependency, but rather a control dependency that the CPU may short-circuit +by attempting to predict the outcome in advance, so that other CPUs see +the load from b as having happened before the load from a. In such a +case what's actually required is: - q = &a; - if (p) { + q = ACCESS_ONCE(a); + if (q) { <read barrier> - q = &b; + p = ACCESS_ONCE(b); + } + +However, stores are not speculated. This means that ordering -is- provided +in the following example: + + q = ACCESS_ONCE(a); + if (ACCESS_ONCE(q)) { + ACCESS_ONCE(b) = p; + } + +Please note that ACCESS_ONCE() is not optional! Without the ACCESS_ONCE(), +the compiler is within its rights to transform this example: + + q = a; + if (q) { + b = p; /* BUG: Compiler can reorder!!! */ + do_something(); + } else { + b = p; /* BUG: Compiler can reorder!!! */ + do_something_else(); + } + +into this, which of course defeats the ordering: + + b = p; + q = a; + if (q) + do_something(); + else + do_something_else(); + +Worse yet, if the compiler is able to prove (say) that the value of +variable 'a' is always non-zero, it would be well within its rights +to optimize the original example by eliminating the "if" statement +as follows: + + q = a; + b = p; /* BUG: Compiler can reorder!!! */ + do_something(); + +The solution is again ACCESS_ONCE(), which preserves the ordering between +the load from variable 'a' and the store to variable 'b': + + q = ACCESS_ONCE(a); + if (q) { + ACCESS_ONCE(b) = p; + do_something(); + } else { + ACCESS_ONCE(b) = p; + do_something_else(); + } + +You could also use barrier() to prevent the compiler from moving +the stores to variable 'b', but barrier() would not prevent the +compiler from proving to itself that a==1 always, so ACCESS_ONCE() +is also needed. + +It is important to note that control dependencies absolutely require a +a conditional. For example, the following "optimized" version of +the above example breaks ordering: + + q = ACCESS_ONCE(a); + ACCESS_ONCE(b) = p; /* BUG: No ordering vs. load from a!!! */ + if (q) { + /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */ + do_something(); + } else { + /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */ + do_something_else(); } - x = *q; + +It is of course legal for the prior load to be part of the conditional, +for example, as follows: + + if (ACCESS_ONCE(a) > 0) { + ACCESS_ONCE(b) = q / 2; + do_something(); + } else { + ACCESS_ONCE(b) = q / 3; + do_something_else(); + } + +This will again ensure that the load from variable 'a' is ordered before the +stores to variable 'b'. + +In addition, you need to be careful what you do with the local variable 'q', +otherwise the compiler might be able to guess the value and again remove +the needed conditional. For example: + + q = ACCESS_ONCE(a); + if (q % MAX) { + ACCESS_ONCE(b) = p; + do_something(); + } else { + ACCESS_ONCE(b) = p; + do_something_else(); + } + +If MAX is defined to be 1, then the compiler knows that (q % MAX) is +equal to zero, in which case the compiler is within its rights to +transform the above code into the following: + + q = ACCESS_ONCE(a); + ACCESS_ONCE(b) = p; + do_something_else(); + +This transformation loses the ordering between the load from variable 'a' +and the store to variable 'b'. If you are relying on this ordering, you +should do something like the following: + + q = ACCESS_ONCE(a); + BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */ + if (q % MAX) { + ACCESS_ONCE(b) = p; + do_something(); + } else { + ACCESS_ONCE(b) = p; + do_something_else(); + } + +Finally, control dependencies do -not- provide transitivity. This is +demonstrated by two related examples: + + CPU 0 CPU 1 + ===================== ===================== + r1 = ACCESS_ONCE(x); r2 = ACCESS_ONCE(y); + if (r1 >= 0) if (r2 >= 0) + ACCESS_ONCE(y) = 1; ACCESS_ONCE(x) = 1; + + assert(!(r1 == 1 && r2 == 1)); + +The above two-CPU example will never trigger the assert(). However, +if control dependencies guaranteed transitivity (which they do not), +then adding the following two CPUs would guarantee a related assertion: + + CPU 2 CPU 3 + ===================== ===================== + ACCESS_ONCE(x) = 2; ACCESS_ONCE(y) = 2; + + assert(!(r1 == 2 && r2 == 2 && x == 1 && y == 1)); /* FAILS!!! */ + +But because control dependencies do -not- provide transitivity, the +above assertion can fail after the combined four-CPU example completes. +If you need the four-CPU example to provide ordering, you will need +smp_mb() between the loads and stores in the CPU 0 and CPU 1 code fragments. + +In summary: + + (*) Control dependencies can order prior loads against later stores. + However, they do -not- guarantee any other sort of ordering: + Not prior loads against later loads, nor prior stores against + later anything. If you need these other forms of ordering, + use smb_rmb(), smp_wmb(), or, in the case of prior stores and + later loads, smp_mb(). + + (*) Control dependencies require at least one run-time conditional + between the prior load and the subsequent store. If the compiler + is able to optimize the conditional away, it will have also + optimized away the ordering. Careful use of ACCESS_ONCE() can + help to preserve the needed conditional. + + (*) Control dependencies require that the compiler avoid reordering the + dependency into nonexistence. Careful use of ACCESS_ONCE() or + barrier() can help to preserve your control dependency. Please + see the Compiler Barrier section for more information. + + (*) Control dependencies do -not- provide transitivity. If you + need transitivity, use smp_mb(). SMP BARRIER PAIRING @@ -561,23 +749,23 @@ barrier, though a general barrier would also be viable. Similarly a read barrier or a data dependency barrier should always be paired with at least an write barrier, though, again, a general barrier is viable: - CPU 1 CPU 2 - =============== =============== - a = 1; + CPU 1 CPU 2 + =============== =============== + ACCESS_ONCE(a) = 1; <write barrier> - b = 2; x = b; - <read barrier> - y = a; + ACCESS_ONCE(b) = 2; x = ACCESS_ONCE(b); + <read barrier> + y = ACCESS_ONCE(a); Or: - CPU 1 CPU 2 - =============== =============================== + CPU 1 CPU 2 + =============== =============================== a = 1; <write barrier> - b = &a; x = b; - <data dependency barrier> - y = *x; + ACCESS_ONCE(b) = &a; x = ACCESS_ONCE(b); + <data dependency barrier> + y = *x; Basically, the read barrier always has to be there, even though it can be of the "weaker" type. @@ -586,13 +774,13 @@ the "weaker" type. match the loads after the read barrier or the data dependency barrier, and vice versa: - CPU 1 CPU 2 - =============== =============== - a = 1; }---- --->{ v = c - b = 2; } \ / { w = d - <write barrier> \ <read barrier> - c = 3; } / \ { x = a; - d = 4; }---- --->{ y = b; + CPU 1 CPU 2 + =================== =================== + ACCESS_ONCE(a) = 1; }---- --->{ v = ACCESS_ONCE(c); + ACCESS_ONCE(b) = 2; } \ / { w = ACCESS_ONCE(d); + <write barrier> \ <read barrier> + ACCESS_ONCE(c) = 3; } / \ { x = ACCESS_ONCE(a); + ACCESS_ONCE(d) = 4; }---- --->{ y = ACCESS_ONCE(b); EXAMPLES OF MEMORY BARRIER SEQUENCES @@ -882,12 +1070,12 @@ cache it for later use. Consider: - CPU 1 CPU 2 + CPU 1 CPU 2 ======================= ======================= - LOAD B - DIVIDE } Divide instructions generally - DIVIDE } take a long time to perform - LOAD A + LOAD B + DIVIDE } Divide instructions generally + DIVIDE } take a long time to perform + LOAD A Which might appear as this: @@ -910,13 +1098,13 @@ Which might appear as this: Placing a read barrier or a data dependency barrier just before the second load: - CPU 1 CPU 2 + CPU 1 CPU 2 ======================= ======================= - LOAD B - DIVIDE - DIVIDE + LOAD B + DIVIDE + DIVIDE <read barrier> - LOAD A + LOAD A will force any value speculatively obtained to be reconsidered to an extent dependent on the type of barrier used. If there was no change made to the @@ -1042,10 +1230,277 @@ compiler from moving the memory accesses either side of it to the other side: barrier(); -This is a general barrier - lesser varieties of compiler barrier do not exist. +This is a general barrier -- there are no read-read or write-write variants +of barrier(). However, ACCESS_ONCE() can be thought of as a weak form +for barrier() that affects only the specific accesses flagged by the +ACCESS_ONCE(). + +The barrier() function has the following effects: + + (*) Prevents the compiler from reordering accesses following the + barrier() to precede any accesses preceding the barrier(). + One example use for this property is to ease communication between + interrupt-handler code and the code that was interrupted. + + (*) Within a loop, forces the compiler to load the variables used + in that loop's conditional on each pass through that loop. + +The ACCESS_ONCE() function can prevent any number of optimizations that, +while perfectly safe in single-threaded code, can be fatal in concurrent +code. Here are some examples of these sorts of optimizations: + + (*) The compiler is within its rights to merge successive loads from + the same variable. Such merging can cause the compiler to "optimize" + the following code: + + while (tmp = a) + do_something_with(tmp); + + into the following code, which, although in some sense legitimate + for single-threaded code, is almost certainly not what the developer + intended: + + if (tmp = a) + for (;;) + do_something_with(tmp); + + Use ACCESS_ONCE() to prevent the compiler from doing this to you: + + while (tmp = ACCESS_ONCE(a)) + do_something_with(tmp); + + (*) The compiler is within its rights to reload a variable, for example, + in cases where high register pressure prevents the compiler from + keeping all data of interest in registers. The compiler might + therefore optimize the variable 'tmp' out of our previous example: + + while (tmp = a) + do_something_with(tmp); + + This could result in the following code, which is perfectly safe in + single-threaded code, but can be fatal in concurrent code: + + while (a) + do_something_with(a); + + For example, the optimized version of this code could result in + passing a zero to do_something_with() in the case where the variable + a was modified by some other CPU between the "while" statement and + the call to do_something_with(). + + Again, use ACCESS_ONCE() to prevent the compiler from doing this: + + while (tmp = ACCESS_ONCE(a)) + do_something_with(tmp); + + Note that if the compiler runs short of registers, it might save + tmp onto the stack. The overhead of this saving and later restoring + is why compilers reload variables. Doing so is perfectly safe for + single-threaded code, so you need to tell the compiler about cases + where it is not safe. + + (*) The compiler is within its rights to omit a load entirely if it knows + what the value will be. For example, if the compiler can prove that + the value of variable 'a' is always zero, it can optimize this code: + + while (tmp = a) + do_something_with(tmp); -The compiler barrier has no direct effect on the CPU, which may then reorder -things however it wishes. + Into this: + + do { } while (0); + + This transformation is a win for single-threaded code because it gets + rid of a load and a branch. The problem is that the compiler will + carry out its proof assuming that the current CPU is the only one + updating variable 'a'. If variable 'a' is shared, then the compiler's + proof will be erroneous. Use ACCESS_ONCE() to tell the compiler + that it doesn't know as much as it thinks it does: + + while (tmp = ACCESS_ONCE(a)) + do_something_with(tmp); + + But please note that the compiler is also closely watching what you + do with the value after the ACCESS_ONCE(). For example, suppose you + do the following and MAX is a preprocessor macro with the value 1: + + while ((tmp = ACCESS_ONCE(a)) % MAX) + do_something_with(tmp); + + Then the compiler knows that the result of the "%" operator applied + to MAX will always be zero, again allowing the compiler to optimize + the code into near-nonexistence. (It will still load from the + variable 'a'.) + + (*) Similarly, the compiler is within its rights to omit a store entirely + if it knows that the variable already has the value being stored. + Again, the compiler assumes that the current CPU is the only one + storing into the variable, which can cause the compiler to do the + wrong thing for shared variables. For example, suppose you have + the following: + + a = 0; + /* Code that does not store to variable a. */ + a = 0; + + The compiler sees that the value of variable 'a' is already zero, so + it might well omit the second store. This would come as a fatal + surprise if some other CPU might have stored to variable 'a' in the + meantime. + + Use ACCESS_ONCE() to prevent the compiler from making this sort of + wrong guess: + + ACCESS_ONCE(a) = 0; + /* Code that does not store to variable a. */ + ACCESS_ONCE(a) = 0; + + (*) The compiler is within its rights to reorder memory accesses unless + you tell it not to. For example, consider the following interaction + between process-level code and an interrupt handler: + + void process_level(void) + { + msg = get_message(); + flag = true; + } + + void interrupt_handler(void) + { + if (flag) + process_message(msg); + } + + There is nothing to prevent the the compiler from transforming + process_level() to the following, in fact, this might well be a + win for single-threaded code: + + void process_level(void) + { + flag = true; + msg = get_message(); + } + + If the interrupt occurs between these two statement, then + interrupt_handler() might be passed a garbled msg. Use ACCESS_ONCE() + to prevent this as follows: + + void process_level(void) + { + ACCESS_ONCE(msg) = get_message(); + ACCESS_ONCE(flag) = true; + } + + void interrupt_handler(void) + { + if (ACCESS_ONCE(flag)) + process_message(ACCESS_ONCE(msg)); + } + + Note that the ACCESS_ONCE() wrappers in interrupt_handler() + are needed if this interrupt handler can itself be interrupted + by something that also accesses 'flag' and 'msg', for example, + a nested interrupt or an NMI. Otherwise, ACCESS_ONCE() is not + needed in interrupt_handler() other than for documentation purposes. + (Note also that nested interrupts do not typically occur in modern + Linux kernels, in fact, if an interrupt handler returns with + interrupts enabled, you will get a WARN_ONCE() splat.) + + You should assume that the compiler can move ACCESS_ONCE() past + code not containing ACCESS_ONCE(), barrier(), or similar primitives. + + This effect could also be achieved using barrier(), but ACCESS_ONCE() + is more selective: With ACCESS_ONCE(), the compiler need only forget + the contents of the indicated memory locations, while with barrier() + the compiler must discard the value of all memory locations that + it has currented cached in any machine registers. Of course, + the compiler must also respect the order in which the ACCESS_ONCE()s + occur, though the CPU of course need not do so. + + (*) The compiler is within its rights to invent stores to a variable, + as in the following example: + + if (a) + b = a; + else + b = 42; + + The compiler might save a branch by optimizing this as follows: + + b = 42; + if (a) + b = a; + + In single-threaded code, this is not only safe, but also saves + a branch. Unfortunately, in concurrent code, this optimization + could cause some other CPU to see a spurious value of 42 -- even + if variable 'a' was never zero -- when loading variable 'b'. + Use ACCESS_ONCE() to prevent this as follows: + + if (a) + ACCESS_ONCE(b) = a; + else + ACCESS_ONCE(b) = 42; + + The compiler can also invent loads. These are usually less + damaging, but they can result in cache-line bouncing and thus in + poor performance and scalability. Use ACCESS_ONCE() to prevent + invented loads. + + (*) For aligned memory locations whose size allows them to be accessed + with a single memory-reference instruction, prevents "load tearing" + and "store tearing," in which a single large access is replaced by + multiple smaller accesses. For example, given an architecture having + 16-bit store instructions with 7-bit immediate fields, the compiler + might be tempted to use two 16-bit store-immediate instructions to + implement the following 32-bit store: + + p = 0x00010002; + + Please note that GCC really does use this sort of optimization, + which is not surprising given that it would likely take more + than two instructions to build the constant and then store it. + This optimization can therefore be a win in single-threaded code. + In fact, a recent bug (since fixed) caused GCC to incorrectly use + this optimization in a volatile store. In the absence of such bugs, + use of ACCESS_ONCE() prevents store tearing in the following example: + + ACCESS_ONCE(p) = 0x00010002; + + Use of packed structures can also result in load and store tearing, + as in this example: + + struct __attribute__((__packed__)) foo { + short a; + int b; + short c; + }; + struct foo foo1, foo2; + ... + + foo2.a = foo1.a; + foo2.b = foo1.b; + foo2.c = foo1.c; + + Because there are no ACCESS_ONCE() wrappers and no volatile markings, + the compiler would be well within its rights to implement these three + assignment statements as a pair of 32-bit loads followed by a pair + of 32-bit stores. This would result in load tearing on 'foo1.b' + and store tearing on 'foo2.b'. ACCESS_ONCE() again prevents tearing + in this example: + + foo2.a = foo1.a; + ACCESS_ONCE(foo2.b) = ACCESS_ONCE(foo1.b); + foo2.c = foo1.c; + +All that aside, it is never necessary to use ACCESS_ONCE() on a variable +that has been marked volatile. For example, because 'jiffies' is marked +volatile, it is never necessary to say ACCESS_ONCE(jiffies). The reason +for this is that ACCESS_ONCE() is implemented as a volatile cast, which +has no effect when its argument is already marked volatile. + +Please note that these compiler barriers have no direct effect on the CPU, +which may then reorder things however it wishes. CPU MEMORY BARRIERS @@ -1135,7 +1590,7 @@ There are some more advanced barrier functions: clear_bit( ... ); This prevents memory operations before the clear leaking to after it. See - the subsection on "Locking Functions" with reference to UNLOCK operation + the subsection on "Locking Functions" with reference to RELEASE operation implications. See Documentation/atomic_ops.txt for more information. See the "Atomic @@ -1169,8 +1624,8 @@ provide more substantial guarantees, but these may not be relied upon outside of arch specific code. -LOCKING FUNCTIONS ------------------ +ACQUIRING FUNCTIONS +------------------- The Linux kernel has a number of locking constructs: @@ -1181,65 +1636,107 @@ The Linux kernel has a number of locking constructs: (*) R/W semaphores (*) RCU -In all cases there are variants on "LOCK" operations and "UNLOCK" operations +In all cases there are variants on "ACQUIRE" operations and "RELEASE" operations for each construct. These operations all imply certain barriers: - (1) LOCK operation implication: + (1) ACQUIRE operation implication: - Memory operations issued after the LOCK will be completed after the LOCK - operation has completed. + Memory operations issued after the ACQUIRE will be completed after the + ACQUIRE operation has completed. - Memory operations issued before the LOCK may be completed after the LOCK - operation has completed. + Memory operations issued before the ACQUIRE may be completed after the + ACQUIRE operation has completed. An smp_mb__before_spinlock(), combined + with a following ACQUIRE, orders prior loads against subsequent stores and + stores and prior stores against subsequent stores. Note that this is + weaker than smp_mb()! The smp_mb__before_spinlock() primitive is free on + many architectures. - (2) UNLOCK operation implication: + (2) RELEASE operation implication: - Memory operations issued before the UNLOCK will be completed before the - UNLOCK operation has completed. + Memory operations issued before the RELEASE will be completed before the + RELEASE operation has completed. - Memory operations issued after the UNLOCK may be completed before the - UNLOCK operation has completed. + Memory operations issued after the RELEASE may be completed before the + RELEASE operation has completed. - (3) LOCK vs LOCK implication: + (3) ACQUIRE vs ACQUIRE implication: - All LOCK operations issued before another LOCK operation will be completed - before that LOCK operation. + All ACQUIRE operations issued before another ACQUIRE operation will be + completed before that ACQUIRE operation. - (4) LOCK vs UNLOCK implication: + (4) ACQUIRE vs RELEASE implication: - All LOCK operations issued before an UNLOCK operation will be completed - before the UNLOCK operation. + All ACQUIRE operations issued before a RELEASE operation will be + completed before the RELEASE operation. - All UNLOCK operations issued before a LOCK operation will be completed - before the LOCK operation. + (5) Failed conditional ACQUIRE implication: - (5) Failed conditional LOCK implication: - - Certain variants of the LOCK operation may fail, either due to being - unable to get the lock immediately, or due to receiving an unblocked + Certain locking variants of the ACQUIRE operation may fail, either due to + being unable to get the lock immediately, or due to receiving an unblocked signal whilst asleep waiting for the lock to become available. Failed locks do not imply any sort of barrier. -Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is -equivalent to a full barrier, but a LOCK followed by an UNLOCK is not. - -[!] Note: one of the consequences of LOCKs and UNLOCKs being only one-way - barriers is that the effects of instructions outside of a critical section - may seep into the inside of the critical section. +[!] Note: one of the consequences of lock ACQUIREs and RELEASEs being only +one-way barriers is that the effects of instructions outside of a critical +section may seep into the inside of the critical section. -A LOCK followed by an UNLOCK may not be assumed to be full memory barrier -because it is possible for an access preceding the LOCK to happen after the -LOCK, and an access following the UNLOCK to happen before the UNLOCK, and the -two accesses can themselves then cross: +An ACQUIRE followed by a RELEASE may not be assumed to be full memory barrier +because it is possible for an access preceding the ACQUIRE to happen after the +ACQUIRE, and an access following the RELEASE to happen before the RELEASE, and +the two accesses can themselves then cross: *A = a; - LOCK - UNLOCK + ACQUIRE M + RELEASE M *B = b; may occur as: - LOCK, STORE *B, STORE *A, UNLOCK + ACQUIRE M, STORE *B, STORE *A, RELEASE M + +This same reordering can of course occur if the lock's ACQUIRE and RELEASE are +to the same lock variable, but only from the perspective of another CPU not +holding that lock. + +In short, a RELEASE followed by an ACQUIRE may -not- be assumed to be a full +memory barrier because it is possible for a preceding RELEASE to pass a +later ACQUIRE from the viewpoint of the CPU, but not from the viewpoint +of the compiler. Note that deadlocks cannot be introduced by this +interchange because if such a deadlock threatened, the RELEASE would +simply complete. + +If it is necessary for a RELEASE-ACQUIRE pair to produce a full barrier, the +ACQUIRE can be followed by an smp_mb__after_unlock_lock() invocation. This +will produce a full barrier if either (a) the RELEASE and the ACQUIRE are +executed by the same CPU or task, or (b) the RELEASE and ACQUIRE act on the +same variable. The smp_mb__after_unlock_lock() primitive is free on many +architectures. Without smp_mb__after_unlock_lock(), the critical sections +corresponding to the RELEASE and the ACQUIRE can cross: + + *A = a; + RELEASE M + ACQUIRE N + *B = b; + +could occur as: + + ACQUIRE N, STORE *B, STORE *A, RELEASE M + +With smp_mb__after_unlock_lock(), they cannot, so that: + + *A = a; + RELEASE M + ACQUIRE N + smp_mb__after_unlock_lock(); + *B = b; + +will always occur as either of the following: + + STORE *A, RELEASE, ACQUIRE, STORE *B + STORE *A, ACQUIRE, RELEASE, STORE *B + +If the RELEASE and ACQUIRE were instead both operating on the same lock +variable, only the first of these two alternatives can occur. Locks and semaphores may not provide any guarantee of ordering on UP compiled systems, and so cannot be counted on in such a situation to actually achieve @@ -1253,33 +1750,33 @@ As an example, consider the following: *A = a; *B = b; - LOCK + ACQUIRE *C = c; *D = d; - UNLOCK + RELEASE *E = e; *F = f; The following sequence of events is acceptable: - LOCK, {*F,*A}, *E, {*C,*D}, *B, UNLOCK + ACQUIRE, {*F,*A}, *E, {*C,*D}, *B, RELEASE [+] Note that {*F,*A} indicates a combined access. But none of the following are: - {*F,*A}, *B, LOCK, *C, *D, UNLOCK, *E - *A, *B, *C, LOCK, *D, UNLOCK, *E, *F - *A, *B, LOCK, *C, UNLOCK, *D, *E, *F - *B, LOCK, *C, *D, UNLOCK, {*F,*A}, *E + {*F,*A}, *B, ACQUIRE, *C, *D, RELEASE, *E + *A, *B, *C, ACQUIRE, *D, RELEASE, *E, *F + *A, *B, ACQUIRE, *C, RELEASE, *D, *E, *F + *B, ACQUIRE, *C, *D, RELEASE, {*F,*A}, *E INTERRUPT DISABLING FUNCTIONS ----------------------------- -Functions that disable interrupts (LOCK equivalent) and enable interrupts -(UNLOCK equivalent) will act as compiler barriers only. So if memory or I/O +Functions that disable interrupts (ACQUIRE equivalent) and enable interrupts +(RELEASE equivalent) will act as compiler barriers only. So if memory or I/O barriers are required in such a situation, they must be provided from some other means. @@ -1418,75 +1915,81 @@ Other functions that imply barriers: (*) schedule() and similar imply full memory barriers. -================================= -INTER-CPU LOCKING BARRIER EFFECTS -================================= +=================================== +INTER-CPU ACQUIRING BARRIER EFFECTS +=================================== On SMP systems locking primitives give a more substantial form of barrier: one that does affect memory access ordering on other CPUs, within the context of conflict on any particular lock. -LOCKS VS MEMORY ACCESSES ------------------------- +ACQUIRES VS MEMORY ACCESSES +--------------------------- Consider the following: the system has a pair of spinlocks (M) and (Q), and three CPUs; then should the following sequence of events occur: CPU 1 CPU 2 =============================== =============================== - *A = a; *E = e; - LOCK M LOCK Q - *B = b; *F = f; - *C = c; *G = g; - UNLOCK M UNLOCK Q - *D = d; *H = h; + ACCESS_ONCE(*A) = a; ACCESS_ONCE(*E) = e; + ACQUIRE M ACQUIRE Q + ACCESS_ONCE(*B) = b; ACCESS_ONCE(*F) = f; + ACCESS_ONCE(*C) = c; ACCESS_ONCE(*G) = g; + RELEASE M RELEASE Q + ACCESS_ONCE(*D) = d; ACCESS_ONCE(*H) = h; Then there is no guarantee as to what order CPU 3 will see the accesses to *A through *H occur in, other than the constraints imposed by the separate locks on the separate CPUs. It might, for example, see: - *E, LOCK M, LOCK Q, *G, *C, *F, *A, *B, UNLOCK Q, *D, *H, UNLOCK M + *E, ACQUIRE M, ACQUIRE Q, *G, *C, *F, *A, *B, RELEASE Q, *D, *H, RELEASE M But it won't see any of: - *B, *C or *D preceding LOCK M - *A, *B or *C following UNLOCK M - *F, *G or *H preceding LOCK Q - *E, *F or *G following UNLOCK Q + *B, *C or *D preceding ACQUIRE M + *A, *B or *C following RELEASE M + *F, *G or *H preceding ACQUIRE Q + *E, *F or *G following RELEASE Q However, if the following occurs: CPU 1 CPU 2 =============================== =============================== - *A = a; - LOCK M [1] - *B = b; - *C = c; - UNLOCK M [1] - *D = d; *E = e; - LOCK M [2] - *F = f; - *G = g; - UNLOCK M [2] - *H = h; + ACCESS_ONCE(*A) = a; + ACQUIRE M [1] + ACCESS_ONCE(*B) = b; + ACCESS_ONCE(*C) = c; + RELEASE M [1] + ACCESS_ONCE(*D) = d; ACCESS_ONCE(*E) = e; + ACQUIRE M [2] + smp_mb__after_unlock_lock(); + ACCESS_ONCE(*F) = f; + ACCESS_ONCE(*G) = g; + RELEASE M [2] + ACCESS_ONCE(*H) = h; CPU 3 might see: - *E, LOCK M [1], *C, *B, *A, UNLOCK M [1], - LOCK M [2], *H, *F, *G, UNLOCK M [2], *D + *E, ACQUIRE M [1], *C, *B, *A, RELEASE M [1], + ACQUIRE M [2], *H, *F, *G, RELEASE M [2], *D But assuming CPU 1 gets the lock first, CPU 3 won't see any of: - *B, *C, *D, *F, *G or *H preceding LOCK M [1] - *A, *B or *C following UNLOCK M [1] - *F, *G or *H preceding LOCK M [2] - *A, *B, *C, *E, *F or *G following UNLOCK M [2] + *B, *C, *D, *F, *G or *H preceding ACQUIRE M [1] + *A, *B or *C following RELEASE M [1] + *F, *G or *H preceding ACQUIRE M [2] + *A, *B, *C, *E, *F or *G following RELEASE M [2] +Note that the smp_mb__after_unlock_lock() is critically important +here: Without it CPU 3 might see some of the above orderings. +Without smp_mb__after_unlock_lock(), the accesses are not guaranteed +to be seen in order unless CPU 3 holds lock M. -LOCKS VS I/O ACCESSES ---------------------- + +ACQUIRES VS I/O ACCESSES +------------------------ Under certain circumstances (especially involving NUMA), I/O accesses within two spinlocked sections on two different CPUs may be seen as interleaved by the @@ -1687,28 +2190,30 @@ explicit lock operations, described later). These include: xchg(); cmpxchg(); - atomic_xchg(); - atomic_cmpxchg(); - atomic_inc_return(); - atomic_dec_return(); - atomic_add_return(); - atomic_sub_return(); - atomic_inc_and_test(); - atomic_dec_and_test(); - atomic_sub_and_test(); - atomic_add_negative(); - atomic_add_unless(); /* when succeeds (returns 1) */ + atomic_xchg(); atomic_long_xchg(); + atomic_cmpxchg(); atomic_long_cmpxchg(); + atomic_inc_return(); atomic_long_inc_return(); + atomic_dec_return(); atomic_long_dec_return(); + atomic_add_return(); atomic_long_add_return(); + atomic_sub_return(); atomic_long_sub_return(); + atomic_inc_and_test(); atomic_long_inc_and_test(); + atomic_dec_and_test(); atomic_long_dec_and_test(); + atomic_sub_and_test(); atomic_long_sub_and_test(); + atomic_add_negative(); atomic_long_add_negative(); test_and_set_bit(); test_and_clear_bit(); test_and_change_bit(); -These are used for such things as implementing LOCK-class and UNLOCK-class + /* when succeeds (returns 1) */ + atomic_add_unless(); atomic_long_add_unless(); + +These are used for such things as implementing ACQUIRE-class and RELEASE-class operations and adjusting reference counters towards object destruction, and as such the implicit memory barrier effects are necessary. The following operations are potential problems as they do _not_ imply memory -barriers, but might be used for implementing such things as UNLOCK-class +barriers, but might be used for implementing such things as RELEASE-class operations: atomic_set(); @@ -1750,7 +2255,7 @@ The following operations are special locking primitives: clear_bit_unlock(); __clear_bit_unlock(); -These implement LOCK-class and UNLOCK-class operations. These should be used in +These implement ACQUIRE-class and RELEASE-class operations. These should be used in preference to other operations when implementing locking primitives, because their implementations can be optimised on many architectures. @@ -1887,8 +2392,8 @@ functions: space should suffice for PCI. [*] NOTE! attempting to load from the same location as was written to may - cause a malfunction - consider the 16550 Rx/Tx serial registers for - example. + cause a malfunction - consider the 16550 Rx/Tx serial registers for + example. Used with prefetchable I/O memory, an mmiowb() barrier may be required to force stores to be ordered. @@ -1955,19 +2460,19 @@ barriers for the most part act at the interface between the CPU and its cache : +--------+ +--------+ : +--------+ +-----------+ | | | | : | | | | +--------+ - | CPU | | Memory | : | CPU | | | | | - | Core |--->| Access |----->| Cache |<-->| | | | + | CPU | | Memory | : | CPU | | | | | + | Core |--->| Access |----->| Cache |<-->| | | | | | | Queue | : | | | |--->| Memory | - | | | | : | | | | | | - +--------+ +--------+ : +--------+ | | | | + | | | | : | | | | | | + +--------+ +--------+ : +--------+ | | | | : | Cache | +--------+ : | Coherency | : | Mechanism | +--------+ +--------+ +--------+ : +--------+ | | | | | | | | : | | | | | | | CPU | | Memory | : | CPU | | |--->| Device | - | Core |--->| Access |----->| Cache |<-->| | | | - | | | Queue | : | | | | | | + | Core |--->| Access |----->| Cache |<-->| | | | + | | | Queue | : | | | | | | | | | | : | | | | +--------+ +--------+ +--------+ : +--------+ +-----------+ : @@ -2090,7 +2595,7 @@ CPU's caches by some other cache event: p = &v; q = p; <D:request p> <B:modify p=&v> <D:commit p=&v> - <D:read p> + <D:read p> x = *q; <C:read *q> Reads from v before v updated in cache <C:unbusy> @@ -2115,7 +2620,7 @@ queue before processing any further requests: p = &v; q = p; <D:request p> <B:modify p=&v> <D:commit p=&v> - <D:read p> + <D:read p> smp_read_barrier_depends() <C:unbusy> <C:commit v=2> @@ -2177,11 +2682,11 @@ A programmer might take it for granted that the CPU will perform memory operations in exactly the order specified, so that if the CPU is, for example, given the following piece of code to execute: - a = *A; - *B = b; - c = *C; - d = *D; - *E = e; + a = ACCESS_ONCE(*A); + ACCESS_ONCE(*B) = b; + c = ACCESS_ONCE(*C); + d = ACCESS_ONCE(*D); + ACCESS_ONCE(*E) = e; they would then expect that the CPU will complete the memory operation for each instruction before moving on to the next one, leading to a definite sequence of @@ -2228,12 +2733,12 @@ However, it is guaranteed that a CPU will be self-consistent: it will see its _own_ accesses appear to be correctly ordered, without the need for a memory barrier. For instance with the following code: - U = *A; - *A = V; - *A = W; - X = *A; - *A = Y; - Z = *A; + U = ACCESS_ONCE(*A); + ACCESS_ONCE(*A) = V; + ACCESS_ONCE(*A) = W; + X = ACCESS_ONCE(*A); + ACCESS_ONCE(*A) = Y; + Z = ACCESS_ONCE(*A); and assuming no intervention by an external influence, it can be assumed that the final result will appear to be: @@ -2250,7 +2755,12 @@ accesses: in that order, but, without intervention, the sequence may have almost any combination of elements combined or discarded, provided the program's view of -the world remains consistent. +the world remains consistent. Note that ACCESS_ONCE() is -not- optional +in the above example, as there are architectures where a given CPU might +interchange successive loads to the same location. On such architectures, +ACCESS_ONCE() does whatever is necessary to prevent this, for example, on +Itanium the volatile casts used by ACCESS_ONCE() cause GCC to emit the +special ld.acq and st.rel instructions that prevent such reordering. The compiler may also combine, discard or defer elements of the sequence before the CPU even sees them. @@ -2264,13 +2774,13 @@ may be reduced to: *A = W; -since, without a write barrier, it can be assumed that the effect of the -storage of V to *A is lost. Similarly: +since, without either a write barrier or an ACCESS_ONCE(), it can be +assumed that the effect of the storage of V to *A is lost. Similarly: *A = Y; Z = *A; -may, without a memory barrier, be reduced to: +may, without a memory barrier or an ACCESS_ONCE(), be reduced to: *A = Y; Z = Y; diff --git a/Documentation/misc-devices/mei/mei-amt-version.c b/Documentation/misc-devices/mei/mei-amt-version.c index 49e4f770864a..57d0d871dcf7 100644 --- a/Documentation/misc-devices/mei/mei-amt-version.c +++ b/Documentation/misc-devices/mei/mei-amt-version.c @@ -115,8 +115,6 @@ static bool mei_init(struct mei *me, const uuid_le *guid, struct mei_client *cl; struct mei_connect_client_data data; - mei_deinit(me); - me->verbose = verbose; me->fd = open("/dev/mei", O_RDWR); diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index a7929cb47e7c..23f1590f49fe 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -18,7 +18,7 @@ Definition of PIN CONTROLLER: - A pin controller is a piece of hardware, usually a set of registers, that can control PINs. It may be able to multiplex, bias, set load capacitance, - set drive strength etc for individual pins or groups of pins. + set drive strength, etc. for individual pins or groups of pins. Definition of PIN: @@ -90,7 +90,7 @@ selected drivers, you need to select them from your machine's Kconfig entry, since these are so tightly integrated with the machines they are used on. See for example arch/arm/mach-u300/Kconfig for an example. -Pins usually have fancier names than this. You can find these in the dataheet +Pins usually have fancier names than this. You can find these in the datasheet for your chip. Notice that the core pinctrl.h file provides a fancy macro called PINCTRL_PIN() to create the struct entries. As you can see I enumerated the pins from 0 in the upper left corner to 63 in the lower right corner. @@ -185,7 +185,7 @@ static struct pinctrl_desc foo_desc = { }; The pin control subsystem will call the .get_groups_count() function to -determine total number of legal selectors, then it will call the other functions +determine the total number of legal selectors, then it will call the other functions to retrieve the name and pins of the group. Maintaining the data structure of the groups is up to the driver, this is just a simple example - in practice you may need more entries in your group structure, for example specific register @@ -195,7 +195,7 @@ ranges associated with each group and so on. Pin configuration ================= -Pins can sometimes be software-configured in an various ways, mostly related +Pins can sometimes be software-configured in various ways, mostly related to their electronic properties when used as inputs or outputs. For example you may be able to make an output pin high impedance, or "tristate" meaning it is effectively disconnected. You may be able to connect an input pin to VDD or GND @@ -291,7 +291,7 @@ Since the pin controller subsystem have its pinspace local to the pin controller we need a mapping so that the pin control subsystem can figure out which pin controller handles control of a certain GPIO pin. Since a single pin controller may be muxing several GPIO ranges (typically SoCs that have -one set of pins but internally several GPIO silicon blocks, each modelled as +one set of pins, but internally several GPIO silicon blocks, each modelled as a struct gpio_chip) any number of GPIO ranges can be added to a pin controller instance like this: @@ -373,9 +373,9 @@ will be called on that specific pin controller. For all functionalities dealing with pin biasing, pin muxing etc, the pin controller subsystem will look up the corresponding pin number from the passed -in gpio number, and use the range's internals to retrive a pin number. After +in gpio number, and use the range's internals to retrieve a pin number. After that, the subsystem passes it on to the pin control driver, so the driver -will get an pin number into its handled number range. Further it is also passed +will get a pin number into its handled number range. Further it is also passed the range ID value, so that the pin controller knows which range it should deal with. @@ -430,8 +430,8 @@ pins you see some will be taken by things like a few VCC and GND to feed power to the chip, and quite a few will be taken by large ports like an external memory interface. The remaining pins will often be subject to pin multiplexing. -The example 8x8 PGA package above will have pin numbers 0 thru 63 assigned to -its physical pins. It will name the pins { A1, A2, A3 ... H6, H7, H8 } using +The example 8x8 PGA package above will have pin numbers 0 through 63 assigned +to its physical pins. It will name the pins { A1, A2, A3 ... H6, H7, H8 } using pinctrl_register_pins() and a suitable data set as shown earlier. In this 8x8 BGA package the pins { A8, A7, A6, A5 } can be used as an SPI port @@ -442,7 +442,7 @@ we cannot use the SPI port and I2C port at the same time. However in the inside of the package the silicon performing the SPI logic can alternatively be routed out on pins { G4, G3, G2, G1 }. -On the botton row at { A1, B1, C1, D1, E1, F1, G1, H1 } we have something +On the bottom row at { A1, B1, C1, D1, E1, F1, G1, H1 } we have something special - it's an external MMC bus that can be 2, 4 or 8 bits wide, and it will consume 2, 4 or 8 pins respectively, so either { A1, B1 } are taken or { A1, B1, C1, D1 } or all of them. If we use all 8 bits, we cannot use the SPI @@ -549,7 +549,7 @@ Assumptions: We assume that the number of possible function maps to pin groups is limited by the hardware. I.e. we assume that there is no system where any function can be -mapped to any pin, like in a phone exchange. So the available pins groups for +mapped to any pin, like in a phone exchange. So the available pin groups for a certain function will be limited to a few choices (say up to eight or so), not hundreds or any amount of choices. This is the characteristic we have found by inspecting available pinmux hardware, and a necessary assumption since we @@ -564,7 +564,7 @@ The pinmux core takes care of preventing conflicts on pins and calling the pin controller driver to execute different settings. It is the responsibility of the pinmux driver to impose further restrictions -(say for example infer electronic limitations due to load etc) to determine +(say for example infer electronic limitations due to load, etc.) to determine whether or not the requested function can actually be allowed, and in case it is possible to perform the requested mux setting, poke the hardware so that this happens. @@ -755,7 +755,7 @@ Pin control interaction with the GPIO subsystem Note that the following implies that the use case is to use a certain pin from the Linux kernel using the API in <linux/gpio.h> with gpio_request() and similar functions. There are cases where you may be using something -that your datasheet calls "GPIO mode" but actually is just an electrical +that your datasheet calls "GPIO mode", but actually is just an electrical configuration for a certain device. See the section below named "GPIO mode pitfalls" for more details on this scenario. @@ -871,7 +871,7 @@ hardware and shall be put into different subsystems: - Registers (or fields within registers) that control muxing of signals from various other HW blocks (e.g. I2C, MMC, or GPIO) onto pins should - be exposed through the pinctrl subssytem, as mux functions. + be exposed through the pinctrl subsystem, as mux functions. - Registers (or fields within registers) that control GPIO functionality such as setting a GPIO's output value, reading a GPIO's input value, or @@ -895,7 +895,7 @@ Example: a pin is usually muxed in to be used as a UART TX line. But during system sleep, we need to put this pin into "GPIO mode" and ground it. If you make a 1-to-1 map to the GPIO subsystem for this pin, you may start -to think that you need to come up with something real complex, that the +to think that you need to come up with something really complex, that the pin shall be used for UART TX and GPIO at the same time, that you will grab a pin control handle and set it to a certain state to enable UART TX to be muxed in, then twist it over to GPIO mode and use gpio_direction_output() @@ -964,12 +964,12 @@ GPIO mode. This will give the desired effect without any bogus interaction with the GPIO subsystem. It is just an electrical configuration used by that device when going to sleep, it might imply that the pin is set into something the -datasheet calls "GPIO mode" but that is not the point: it is still used +datasheet calls "GPIO mode", but that is not the point: it is still used by that UART device to control the pins that pertain to that very UART driver, putting them into modes needed by the UART. GPIO in the Linux kernel sense are just some 1-bit line, and is a different use case. -How the registers are poked to attain the push/pull and output low +How the registers are poked to attain the push or pull, and output low configuration and the muxing of the "u0" or "gpio-mode" group onto these pins is a question for the driver. @@ -977,7 +977,7 @@ Some datasheets will be more helpful and refer to the "GPIO mode" as "low power mode" rather than anything to do with GPIO. This often means the same thing electrically speaking, but in this latter case the software engineers will usually quickly identify that this is some -specific muxing/configuration rather than anything related to the GPIO +specific muxing or configuration rather than anything related to the GPIO API. @@ -1024,8 +1024,7 @@ up the device struct (just like with clockdev or regulators). The function name must match a function provided by the pinmux driver handling this pin range. As you can see we may have several pin controllers on the system and thus -we need to specify which one of them that contain the functions we wish -to map. +we need to specify which one of them contains the functions we wish to map. You register this pinmux mapping to the pinmux subsystem by simply: @@ -1254,10 +1253,10 @@ The semantics of the pinctrl APIs are: pinctrl_get(). - pinctrl_lookup_state() is called in process context to obtain a handle to a - specific state for a the client device. This operation may be slow too. + specific state for a client device. This operation may be slow, too. - pinctrl_select_state() programs pin controller hardware according to the - definition of the state as given by the mapping table. In theory this is a + definition of the state as given by the mapping table. In theory, this is a fast-path operation, since it only involved blasting some register settings into hardware. However, note that some pin controllers may have their registers on a slow/IRQ-based bus, so client devices should not assume they diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 445ad743ec81..6f4eb322ffaf 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -55,14 +55,21 @@ Struct Resources: For printing struct resources. The 'R' and 'r' specifiers result in a printed resource with ('R') or without ('r') a decoded flags member. -Physical addresses: +Physical addresses types phys_addr_t: - %pa 0x01234567 or 0x0123456789abcdef + %pa[p] 0x01234567 or 0x0123456789abcdef For printing a phys_addr_t type (and its derivatives, such as resource_size_t) which can vary based on build options, regardless of the width of the CPU data path. Passed by reference. +DMA addresses types dma_addr_t: + + %pad 0x01234567 or 0x0123456789abcdef + + For printing a dma_addr_t type which can vary based on build options, + regardless of the width of the CPU data path. Passed by reference. + Raw buffer as a hex string: %*ph 00 01 02 ... 3f %*phC 00:01:02: ... :3f diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 03c9d9299c6b..f430004df73c 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -71,7 +71,7 @@ To create an rfkill driver, driver's Kconfig needs to have depends on RFKILL || !RFKILL to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL -case allows the driver to be built when rfkill is not configured, which which +case allows the driver to be built when rfkill is not configured, which case all rfkill API can still be used but will be provided by static inlines which compile to almost nothing. diff --git a/Documentation/robust-futex-ABI.txt b/Documentation/robust-futex-ABI.txt index fd1cd8aae4eb..16eb314f56cc 100644 --- a/Documentation/robust-futex-ABI.txt +++ b/Documentation/robust-futex-ABI.txt @@ -146,8 +146,8 @@ On removal: 1) set the 'list_op_pending' word to the address of the 'lock entry' to be removed, 2) remove the lock entry for this lock from the 'head' list, - 2) release the futex lock, and - 2) clear the 'lock_op_pending' word. + 3) release the futex lock, and + 4) clear the 'lock_op_pending' word. On exit, the kernel will consider the address stored in 'list_op_pending' and the address of each 'lock word' found by walking diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt index a5bcd7f5c33f..8666070d3189 100644 --- a/Documentation/rt-mutex-design.txt +++ b/Documentation/rt-mutex-design.txt @@ -30,7 +30,7 @@ is something called unbounded priority inversion. That is when the high priority process is prevented from running by a lower priority process for an undetermined amount of time. -The classic example of unbounded priority inversion is were you have three +The classic example of unbounded priority inversion is where you have three processes, let's call them processes A, B, and C, where A is the highest priority process, C is the lowest, and B is in between. A tries to grab a lock that C owns and must wait and lets C run to release the lock. But in the diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index 9b0787f965e9..2044be565d93 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -42,8 +42,6 @@ aic79xx.txt - Adaptec Ultra320 SCSI host adapters aic7xxx.txt - info on driver for Adaptec controllers -aic7xxx_old.txt - - info on driver for Adaptec controllers, old generation arcmsr_spec.txt - ARECA FIRMWARE SPEC (for IOP331 adapter) dc395x.txt diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt deleted file mode 100644 index ecfc474f36a8..000000000000 --- a/Documentation/scsi/aic7xxx_old.txt +++ /dev/null @@ -1,511 +0,0 @@ - AIC7xxx Driver for Linux - -Introduction ----------------------------- -The AIC7xxx SCSI driver adds support for Adaptec (http://www.adaptec.com) -SCSI controllers and chipsets. Major portions of the driver and driver -development are shared between both Linux and FreeBSD. Support for the -AIC-7xxx chipsets have been in the default Linux kernel since approximately -linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD -2.1.0 or later. - - Supported cards/chipsets - ---------------------------- - Adaptec Cards - ---------------------------- - AHA-274x - AHA-274xT - AHA-2842 - AHA-2910B - AHA-2920C - AHA-2930 - AHA-2930U - AHA-2930CU - AHA-2930U2 - AHA-2940 - AHA-2940W - AHA-2940U - AHA-2940UW - AHA-2940UW-PRO - AHA-2940AU - AHA-2940U2W - AHA-2940U2 - AHA-2940U2B - AHA-2940U2BOEM - AHA-2944D - AHA-2944WD - AHA-2944UD - AHA-2944UWD - AHA-2950U2 - AHA-2950U2W - AHA-2950U2B - AHA-29160M - AHA-3940 - AHA-3940U - AHA-3940W - AHA-3940UW - AHA-3940AUW - AHA-3940U2W - AHA-3950U2B - AHA-3950U2D - AHA-3960D - AHA-39160M - AHA-3985 - AHA-3985U - AHA-3985W - AHA-3985UW - - Motherboard Chipsets - ---------------------------- - AIC-777x - AIC-785x - AIC-786x - AIC-787x - AIC-788x - AIC-789x - AIC-3860 - - Bus Types - ---------------------------- - W - Wide SCSI, SCSI-3, 16bit bus, 68pin connector, will also support - SCSI-1/SCSI-2 50pin devices, transfer rates up to 20MB/s. - U - Ultra SCSI, transfer rates up to 40MB/s. - U2- Ultra 2 SCSI, transfer rates up to 80MB/s. - D - Differential SCSI. - T - Twin Channel SCSI. Up to 14 SCSI devices. - - AHA-274x - EISA SCSI controller - AHA-284x - VLB SCSI controller - AHA-29xx - PCI SCSI controller - AHA-394x - PCI controllers with two separate SCSI controllers on-board. - AHA-398x - PCI RAID controllers with three separate SCSI controllers - on-board. - - Not Supported Devices - ------------------------------ - Adaptec Cards - ---------------------------- - AHA-2920 (Only the cards that use the Future Domain chipset are not - supported, any 2920 cards based on Adaptec AIC chipsets, - such as the 2920C, are supported) - AAA-13x Raid Adapters - AAA-113x Raid Port Card - - Motherboard Chipsets - ---------------------------- - AIC-7810 - - Bus Types - ---------------------------- - R - Raid Port busses are not supported. - - The hardware RAID devices sold by Adaptec are *NOT* supported by this - driver (and will people please stop emailing me about them, they are - a totally separate beast from the bare SCSI controllers and this driver - cannot be retrofitted in any sane manner to support the hardware RAID - features on those cards - Doug Ledford). - - - People - ------------------------------ - Justin T Gibbs gibbs@plutotech.com - (BSD Driver Author) - Dan Eischen deischen@iworks.InterWorks.org - (Original Linux Driver Co-maintainer) - Dean Gehnert deang@teleport.com - (Original Linux FTP/patch maintainer) - Jess Johnson jester@frenzy.com - (AIC7xxx FAQ author) - Doug Ledford dledford@redhat.com - (Current Linux aic7xxx-5.x.x Driver/Patch/FTP maintainer) - - Special thanks go to John Aycock (aycock@cpsc.ucalgary.ca), the original - author of the driver. John has since retired from the project. Thanks - again for all his work! - - Mailing list - ------------------------------ - There is a mailing list available for users who want to track development - and converse with other users and developers. This list is for both - FreeBSD and Linux support of the AIC7xxx chipsets. - - To subscribe to the AIC7xxx mailing list send mail to the list server, - with "subscribe AIC7xxx" in the body (no Subject: required): - To: majordomo@FreeBSD.ORG - --- - subscribe AIC7xxx - - To unsubscribe from the list, send mail to the list server with: - To: majordomo@FreeBSD.ORG - --- - unsubscribe AIC7xxx - - Send regular messages and replies to: AIC7xxx@FreeBSD.ORG - - Boot Command line options - ------------------------------ - "aic7xxx=no_reset" - Eliminate the SCSI bus reset during startup. - Some SCSI devices need the initial reset that this option disables - in order to work. If you have problems at bootup, please make sure - you aren't using this option. - - "aic7xxx=reverse_scan" - Certain PCI motherboards scan for devices at - bootup by scanning from the highest numbered PCI device to the - lowest numbered PCI device, others do just the opposite and scan - from lowest to highest numbered PCI device. There is no reliable - way to autodetect this ordering. So, we default to the most common - order, which is lowest to highest. Then, in case your motherboard - scans from highest to lowest, we have this option. If your BIOS - finds the drives on controller A before controller B but the linux - kernel finds your drives on controller B before A, then you should - use this option. - - "aic7xxx=extended" - Force the driver to detect extended drive translation - on your controller. This helps those people who have cards without - a SEEPROM make sure that linux and all other operating systems think - the same way about your hard drives. - - "aic7xxx=scbram" - Some cards have external SCB RAM that can be used to - give the card more hardware SCB slots. This allows the driver to use - that SCB RAM. Without this option, the driver won't touch the SCB - RAM because it is known to cause problems on a few cards out there - (such as 3985 class cards). - - "aic7xxx=irq_trigger:x" - Replace x with either 0 or 1 to force the kernel - to use the correct IRQ type for your card. This only applies to EISA - based controllers. On these controllers, 0 is for Edge triggered - interrupts, and 1 is for Level triggered interrupts. If you aren't - sure or don't know which IRQ trigger type your EISA card uses, then - let the kernel autodetect the trigger type. - - "aic7xxx=verbose" - This option can be used in one of two ways. If you - simply specify aic7xxx=verbose, then the kernel will automatically - pick the default set of verbose messages for you to see. - Alternatively, you can specify the command as - "aic7xxx=verbose:0xXXXX" where the X entries are replaced with - hexadecimal digits. This option is a bit field type option. For - a full listing of the available options, search for the - #define VERBOSE_xxxxxx lines in the aic7xxx.c file. If you want - verbose messages, then it is recommended that you simply use the - aic7xxx=verbose variant of this command. - - "aic7xxx=pci_parity:x" - This option controls whether or not the driver - enables PCI parity error checking on the PCI bus. By default, this - checking is disabled. To enable the checks, simply specify pci_parity - with no value afterwords. To reverse the parity from even to odd, - supply any number other than 0 or 255. In short: - pci_parity - Even parity checking (even is the normal PCI parity) - pci_parity:x - Where x > 0, Odd parity checking - pci_parity:0 - No check (default) - NOTE: In order to get Even PCI parity checking, you must use the - version of the option that does not include the : and a number at - the end (unless you want to enter exactly 2^32 - 1 as the number). - - "aic7xxx=no_probe" - This option will disable the probing for any VLB - based 2842 controllers and any EISA based controllers. This is - needed on certain newer motherboards where the normal EISA I/O ranges - have been claimed by other PCI devices. Probing on those machines - will often result in the machine crashing or spontaneously rebooting - during startup. Examples of machines that need this are the - Dell PowerEdge 6300 machines. - - "aic7xxx=seltime:2" - This option controls how long the card waits - during a device selection sequence for the device to respond. - The original SCSI spec says that this "should be" 256ms. This - is generally not required with modern devices. However, some - very old SCSI I devices need the full 256ms. Most modern devices - can run fine with only 64ms. The default for this option is - 64ms. If you need to change this option, then use the following - table to set the proper value in the example above: - 0 - 256ms - 1 - 128ms - 2 - 64ms - 3 - 32ms - - "aic7xxx=panic_on_abort" - This option is for debugging and will cause - the driver to panic the linux kernel and freeze the system the first - time the drivers abort or reset routines are called. This is most - helpful when some problem causes infinite reset loops that scroll too - fast to see. By using this option, you can write down what the errors - actually are and send that information to me so it can be fixed. - - "aic7xxx=dump_card" - This option will print out the *entire* set of - configuration registers on the card during the init sequence. This - is a debugging aid used to see exactly what state the card is in - when we finally finish our initialization routines. If you don't - have documentation on the chipsets, this will do you absolutely - no good unless you are simply trying to write all the information - down in order to send it to me. - - "aic7xxx=dump_sequencer" - This is the same as the above options except - that instead of dumping the register contents on the card, this - option dumps the contents of the sequencer program RAM. This gives - the ability to verify that the instructions downloaded to the - card's sequencer are indeed what they are supposed to be. Again, - unless you have documentation to tell you how to interpret these - numbers, then it is totally useless. - - "aic7xxx=override_term:0xffffffff" - This option is used to force the - termination on your SCSI controllers to a particular setting. This - is a bit mask variable that applies for up to 8 aic7xxx SCSI channels. - Each channel gets 4 bits, divided as follows: - bit 3 2 1 0 - | | | Enable/Disable Single Ended Low Byte Termination - | | En/Disable Single Ended High Byte Termination - | En/Disable Low Byte LVD Termination - En/Disable High Byte LVD Termination - - The upper 2 bits that deal with LVD termination only apply to Ultra2 - controllers. Furthermore, due to the current Ultra2 controller - designs, these bits are tied together such that setting either bit - enables both low and high byte LVD termination. It is not possible - to only set high or low byte LVD termination in this manner. This is - an artifact of the BIOS definition on Ultra2 controllers. For other - controllers, the only important bits are the two lowest bits. Setting - the higher bits on non-Ultra2 controllers has no effect. A few - examples of how to use this option: - - Enable low and high byte termination on a non-ultra2 controller that - is the first aic7xxx controller (the correct bits are 0011), - aic7xxx=override_term:0x3 - - Enable all termination on the third aic7xxx controller, high byte - termination on the second aic7xxx controller, and low and high byte - SE termination on the first aic7xxx controller - (bits are 1111 0010 0011), - aic7xxx=override_term:0xf23 - - No attempt has been made to make this option non-cryptic. It really - shouldn't be used except in dire circumstances, and if that happens, - I'm probably going to be telling you what to set this to anyway :) - - "aic7xxx=stpwlev:0xffffffff" - This option is used to control the STPWLEV - bit in the DEVCONFIG PCI register. Currently, this is one of the - very few registers that we have absolutely *no* way of detecting - what the variable should be. It depends entirely on how the chipset - and external terminators were coupled by the card/motherboard maker. - Further, a chip reset (at power up) always sets this bit to 0. If - there is no BIOS to run on the chipset/card (such as with a 2910C - or a motherboard controller with the BIOS totally disabled) then - the variable may not get set properly. Of course, if the proper - setting was 0, then that's what it would be after the reset, but if - the proper setting is actually 1.....you get the picture. Now, since - we can't detect this at all, I've added this option to force the - setting. If you have a BIOS on your controller then you should never - need to use this option. However, if you are having lots of SCSI - reset problems and can't seem to get them knocked out, this may help. - - Here's a test to know for certain if you need this option. Make - a boot floppy that you can use to boot your computer up and that - will detect the aic7xxx controller. Next, power down your computer. - While it's down, unplug all SCSI cables from your Adaptec SCSI - controller. Boot the system back up to the Adaptec EZ-SCSI BIOS - and then make sure that termination is enabled on your adapter (if - you have an Adaptec BIOS of course). Next, boot up the floppy you - made and wait for it to detect the aic7xxx controller. If the kernel - finds the controller fine, says scsi : x hosts and then tries to - detect your devices like normal, up to the point where it fails to - mount your root file system and panics, then you're fine. If, on - the other hand, the system goes into an infinite reset loop, then - you need to use this option and/or the previous option to force the - proper termination settings on your controller. If this happens, - then you next need to figure out what your settings should be. - - To find the correct settings, power your machine back down, connect - back up the SCSI cables, and boot back into your machine like normal. - However, boot with the aic7xxx=verbose:0x39 option. Record the - initial DEVCONFIG values for each of your aic7xxx controllers as - they are listed, and also record what the machine is detecting as - the proper termination on your controllers. NOTE: the order in - which the initial DEVCONFIG values are printed out is not guaranteed - to be the same order as the SCSI controllers are registered. The - above option and this option both work on the order of the SCSI - controllers as they are registered, so make sure you match the right - DEVCONFIG values with the right controllers if you have more than - one aic7xxx controller. - - Once you have the detected termination settings and the initial - DEVCONFIG values for each controller, then figure out what the - termination on each of the controllers *should* be. Hopefully, that - part is correct, but it could possibly be wrong if there is - bogus cable detection logic on your controller or something similar. - If all the controllers have the correct termination settings, then - don't set the aic7xxx=override_term variable at all, leave it alone. - Next, on any controllers that go into an infinite reset loop when - you unplug all the SCSI cables, get the starting DEVCONFIG value. - If the initial DEVCONFIG value is divisible by 2, then the correct - setting for that controller is 0. If it's an odd number, then - the correct setting for that controller is 1. For any other - controllers that didn't have an infinite reset problem, then reverse - the above options. If DEVCONFIG was even, then the correct setting - is 1, if not then the correct setting is 0. - - Now that you know what the correct setting was for each controller, - we need to encode that into the aic7xxx=stpwlev:0x... variable. - This variable is a bit field encoded variable. Bit 0 is for the first - aic7xxx controller, bit 1 for the next, etc. Put all these bits - together and you get a number. For example, if the third aic7xxx - needed a 1, but the second and first both needed a 0, then the bits - would be 100 in binary. This then translates to 0x04. You would - therefore set aic7xxx=stpwlev:0x04. This is fairly standard binary - to hexadecimal conversions here. If you aren't up to speed on the - binary->hex conversion then send an email to the aic7xxx mailing - list and someone can help you out. - - "aic7xxx=tag_info:{{8,8..},{8,8..},..}" - This option is used to disable - or enable Tagged Command Queueing (TCQ) on specific devices. As of - driver version 5.1.11, TCQ is now either on or off by default - according to the setting you choose during the make config process. - In order to en/disable TCQ for certain devices at boot time, a user - may use this boot param. The driver will then parse this message out - and en/disable the specific device entries that are present based upon - the value given. The param line is parsed in the following manner: - - { - first instance indicates the start of this parameter values - second instance is the start of entries for a particular - device entry - } - end the entries for a particular host adapter, or end the entire - set of parameter entries - , - move to next entry. Inside of a set of device entries, this - moves us to the next device on the list. Outside of device - entries, this moves us to the next host adapter - . - Same effect as , but is safe to use with insmod. - x - the number to enter into the array at this position. - 0 = Enable tagged queueing on this device and use the default - queue depth - 1-254 = Enable tagged queueing on this device and use this - number as the queue depth - 255 = Disable tagged queueing on this device. - Note: anything above 32 for an actual queue depth is wasteful - and not recommended. - - A few examples of how this can be used: - - tag_info:{{8,12,,0,,255,4}} - This line will only effect the first aic7xxx card registered. It - will set scsi id 0 to a queue depth of 8, id 1 to 12, leave id 2 - at the default, set id 3 to tagged queueing enabled and use the - default queue depth, id 4 default, id 5 disabled, and id 6 to 4. - Any not specified entries stay at the default value, repeated - commas with no value specified will simply increment to the next id - without changing anything for the missing values. - - tag_info:{,,,{,,,255}} - First, second, and third adapters at default values. Fourth - adapter, id 3 is disabled. Notice that leading commas simply - increment what the first number effects, and there are no need - for trailing commas. When you close out an adapter, or the - entire entry, anything not explicitly set stays at the default - value. - - A final note on this option. The scanner I used for this isn't - perfect or highly robust. If you mess the line up, the worst that - should happen is that the line will get ignored. If you don't - close out the entire entry with the final bracket, then any other - aic7xxx options after this will get ignored. So, in general, be - sure of what you are entering, and after you have it right, just - add it to the lilo.conf file so there won't be any mistakes. As - a means of checking this parser, the entire tag_info array for - each card is now printed out in the /proc/scsi/aic7xxx/x file. You - can use that to verify that your options were parsed correctly. - - Boot command line options may be combined to form the proper set of options - a user might need. For example, the following is valid: - - aic7xxx=verbose,extended,irq_trigger:1 - - The only requirement is that individual options be separated by a comma or - a period on the command line. - - Module Loading command options - ------------------------------ - When loading the aic7xxx driver as a module, the exact same options are - available to the user. However, the syntax to specify the options changes - slightly. For insmod, you need to wrap the aic7xxx= argument in quotes - and replace all ',' with '.'. So, for example, a valid insmod line - would be: - - insmod aic7xxx aic7xxx='verbose.irq_trigger:1.extended' - - This line should result in the *exact* same behaviour as if you typed - it in at the lilo prompt and the driver was compiled into the kernel - instead of being a module. The reason for the single quote is so that - the shell won't try to interpret anything in the line, such as {. - Insmod assumes any options starting with a letter instead of a number - is a character string (which is what we want) and by switching all of - the commas to periods, insmod won't interpret this as more than one - string and write junk into our binary image. I consider it a bug in - the insmod program that even if you wrap your string in quotes (quotes - that pass the shell mind you and that insmod sees) it still treats - a comma inside of those quotes as starting a new variable, resulting - in memory scribbles if you don't switch the commas to periods. - - - Kernel Compile options - ------------------------------ - The various kernel compile time options for this driver are now fairly - well documented in the file drivers/scsi/Kconfig. In order to - see this documentation, you need to use one of the advanced configuration - programs (menuconfig and xconfig). If you are using the "make menuconfig" - method of configuring your kernel, then you would simply highlight the - option in question and hit the ? key. If you are using the "make xconfig" - method of configuring your kernel, then simply click on the help button - next to the option you have questions about. The help information from - the Configure.help file will then get automatically displayed. - - /proc support - ------------------------------ - The /proc support for the AIC7xxx can be found in the /proc/scsi/aic7xxx/ - directory. That directory contains a file for each SCSI controller in - the system. Each file presents the current configuration and transfer - statistics (enabled with #define in aic7xxx.c) for each controller. - - Thanks to Michael Neuffer for his upper-level SCSI help, and - Matthew Jacob for statistics support. - - Debugging the driver - ------------------------------ - Should you have problems with this driver, and would like some help in - getting them solved, there are a couple debugging items built into - the driver to facilitate getting the needed information from the system. - In general, I need a complete description of the problem, with as many - logs as possible concerning what happens. To help with this, there is - a command option aic7xxx=panic_on_abort. This option, when set, forces - the driver to panic the kernel on the first SCSI abort issued by the - mid level SCSI code. If your system is going to reset loops and you - can't read the screen, then this is what you need. Not only will it - stop the system, but it also prints out a large amount of state - information in the process. Second, if you specify the option - "aic7xxx=verbose:0x1ffff", the system will print out *SOOOO* much - information as it runs that you won't be able to see anything. - However, this can actually be very useful if your machine simply - locks up when trying to boot, since it will pin-point what was last - happening (in regards to the aic7xxx driver) immediately prior to - the lockup. This is really only useful if your machine simply can - not boot up successfully. If you can get your machine to run, then - this will produce far too much information. - - FTP sites - ------------------------------ - ftp://ftp.redhat.com/pub/aic/ - - Out of date. I used to keep stuff here, but too many people - complained about having a hard time getting into Red Hat's ftp - server. So use the web site below instead. - ftp://ftp.pcnet.com/users/eischen/Linux/ - - Dan Eischen's driver distribution area - ftp://ekf2.vsb.cz/pub/linux/kernel/aic7xxx/ftp.teleport.com/ - - European Linux mirror of Teleport site - - Web sites - ------------------------------ - http://people.redhat.com/dledford/ - - My web site, also the primary aic7xxx site with several related - pages. - -Dean W. Gehnert -deang@teleport.com - -$Revision: 3.0 $ - -Modified by Doug Ledford 1998-2000 - diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 6ff16b620d84..a0c85110a07e 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -42,20 +42,14 @@ discussion. Once LLDD gets hold of a scmd, either the LLDD will complete the command by calling scsi_done callback passed from midlayer when -invoking hostt->queuecommand() or SCSI midlayer will time it out. +invoking hostt->queuecommand() or the block layer will time it out. [1-2-1] Completing a scmd w/ scsi_done For all non-EH commands, scsi_done() is the completion callback. It -does the following. - - 1. Delete timeout timer. If it fails, it means that timeout timer - has expired and is going to finish the command. Just return. - - 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry - - 3. Raise SCSI_SOFTIRQ +just calls blk_complete_request() to delete the block layer timer and +raise SCSI_SOFTIRQ SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to determine what to do with the command. scsi_decide_disposition() @@ -64,10 +58,12 @@ with the command. - SUCCESS scsi_finish_command() is invoked for the command. The - function does some maintenance choirs and notify completion by - calling scmd->done() callback, which, for fs requests, would - be HLD completion callback - sd:sd_rw_intr, sr:rw_intr, - st:st_intr. + function does some maintenance chores and then calls + scsi_io_completion() to finish the I/O. + scsi_io_completion() then notifies the block layer on + the completed request by calling blk_end_request and + friends or figures out what to do with the remainder + of the data in case of an error. - NEEDS_RETRY - ADD_TO_MLQUEUE @@ -86,33 +82,45 @@ function 1. invokes optional hostt->eh_timed_out() callback. Return value can be one of - - EH_HANDLED - This indicates that eh_timed_out() dealt with the timeout. The - scmd is passed to __scsi_done() and thus linked into per-cpu - scsi_done_q. Normal command completion described in [1-2-1] - follows. + - BLK_EH_HANDLED + This indicates that eh_timed_out() dealt with the timeout. + The command is passed back to the block layer and completed + via __blk_complete_requests(). + + *NOTE* After returning BLK_EH_HANDLED the SCSI layer is + assumed to be finished with the command, and no other + functions from the SCSI layer will be called. So this + should typically only be returned if the eh_timed_out() + handler raced with normal completion. - - EH_RESET_TIMER + - BLK_EH_RESET_TIMER This indicates that more time is required to finish the command. Timer is restarted. This action is counted as a retry and only allowed scmd->allowed + 1(!) times. Once the - limit is reached, action for EH_NOT_HANDLED is taken instead. + limit is reached, action for BLK_EH_NOT_HANDLED is taken instead. - *NOTE* This action is racy as the LLDD could finish the scmd - after the timeout has expired but before it's added back. In - such cases, scsi_done() would think that timeout has occurred - and return without doing anything. We lose completion and the - command will time out again. - - - EH_NOT_HANDLED - This is the same as when eh_timed_out() callback doesn't exist. + - BLK_EH_NOT_HANDLED + eh_timed_out() callback did not handle the command. Step #2 is taken. + 2. If the host supports asynchronous completion (as indicated by the + no_async_abort setting in the host template) scsi_abort_command() + is invoked to schedule an asynchrous abort. If that fails + Step #3 is taken. + 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the command. See [1-3] for more information. +[1-3] Asynchronous command aborts + + After a timeout occurs a command abort is scheduled from + scsi_abort_command(). If the abort is successful the command + will either be retried (if the number of retries is not exhausted) + or terminated with DID_TIME_OUT. + Otherwise scsi_eh_scmd_add() is invoked for the command. + See [1-4] for more information. -[1-3] How EH takes over +[1-4] How EH takes over scmds enter EH via scsi_eh_scmd_add(), which does the following. @@ -320,7 +328,8 @@ scmd->allowed. <<scsi_eh_abort_cmds>> - This action is taken for each timed out command. + This action is taken for each timed out command when + no_async_abort is enabled in the host template. hostt->eh_abort_handler() is invoked for each scmd. The handler returns SUCCESS if it has succeeded to make LLDD and all related hardware forget about the scmd. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 2b06aba4fa0f..d6a9bdeee7f2 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -882,8 +882,11 @@ Details: * * Calling context: kernel thread * - * Notes: Invoked from scsi_eh thread. No other commands will be - * queued on current host during eh. + * Notes: If 'no_async_abort' is defined this callback + * will be invoked from scsi_eh thread. No other commands + * will then be queued on current host during eh. + * Otherwise it will be called whenever scsi_times_out() + * is called due to a command timeout. * * Optionally defined in: LLD **/ @@ -1257,6 +1260,8 @@ of interest: address space use_clustering - 1=>SCSI commands in mid level's queue can be merged, 0=>disallow SCSI command merging + no_async_abort - 1=>Asynchronous aborts are not supported + 0=>Timed-out commands will be aborted asynchronously hostt - pointer to driver's struct scsi_host_template from which this struct Scsi_Host instance was spawned hostt->proc_name - name of LLD. This is the driver name that sysfs uses diff --git a/Documentation/scsi/scsi_transport_srp/Makefile b/Documentation/scsi/scsi_transport_srp/Makefile new file mode 100644 index 000000000000..5f6b567e955c --- /dev/null +++ b/Documentation/scsi/scsi_transport_srp/Makefile @@ -0,0 +1,7 @@ +all: rport_state_diagram.svg rport_state_diagram.png + +rport_state_diagram.svg: rport_state_diagram.dot + dot -Tsvg -o $@ $< + +rport_state_diagram.png: rport_state_diagram.dot + dot -Tpng -o $@ $< diff --git a/Documentation/scsi/scsi_transport_srp/rport_state_diagram.dot b/Documentation/scsi/scsi_transport_srp/rport_state_diagram.dot new file mode 100644 index 000000000000..75d610d6411a --- /dev/null +++ b/Documentation/scsi/scsi_transport_srp/rport_state_diagram.dot @@ -0,0 +1,26 @@ +digraph srp_initiator { + node [shape = doublecircle]; running lost; + node [shape = circle]; + + { + rank = min; + running_rta [ label = "running;\nreconnect\ntimer\nactive" ]; + }; + running [ label = "running;\nreconnect\ntimer\nstopped" ]; + blocked; + failfast [ label = "fail I/O\nfast" ]; + lost; + + running -> running_rta [ label = "fast_io_fail_tmo = off and\ndev_loss_tmo = off;\nsrp_start_tl_fail_timers()" ]; + running_rta -> running [ label = "fast_io_fail_tmo = off and\ndev_loss_tmo = off;\nreconnecting succeeded" ]; + running -> blocked [ label = "fast_io_fail_tmo >= 0 or\ndev_loss_tmo >= 0;\nsrp_start_tl_fail_timers()" ]; + running -> failfast [ label = "fast_io_fail_tmo = off and\ndev_loss_tmo = off;\nreconnecting failed\n" ]; + blocked -> failfast [ label = "fast_io_fail_tmo\nexpired or\nreconnecting\nfailed" ]; + blocked -> lost [ label = "dev_loss_tmo\nexpired or\nsrp_stop_rport_timers()" ]; + failfast -> lost [ label = "dev_loss_tmo\nexpired or\nsrp_stop_rport_timers()" ]; + blocked -> running [ label = "reconnecting\nsucceeded" ]; + failfast -> failfast [ label = "reconnecting\nfailed" ]; + failfast -> running [ label = "reconnecting\nsucceeded" ]; + running -> lost [ label = "srp_stop_rport_timers()" ]; + running_rta -> lost [ label = "srp_stop_rport_timers()" ]; +} diff --git a/Documentation/security/IMA-templates.txt b/Documentation/security/IMA-templates.txt index a777e5f1df5b..a4e102dddfea 100644 --- a/Documentation/security/IMA-templates.txt +++ b/Documentation/security/IMA-templates.txt @@ -67,12 +67,14 @@ descriptors by adding their identifier to the format string - 'd-ng': the digest of the event, calculated with an arbitrary hash algorithm (field format: [<hash algo>:]digest, where the digest prefix is shown only if the hash algorithm is not SHA1 or MD5); - - 'n-ng': the name of the event, without size limitations. + - 'n-ng': the name of the event, without size limitations; + - 'sig': the file signature. Below, there is the list of defined template descriptors: - "ima": its format is 'd|n'; - - "ima-ng" (default): its format is 'd-ng|n-ng'. + - "ima-ng" (default): its format is 'd-ng|n-ng'; + - "ima-sig": its format is 'd-ng|n-ng|sig'. diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt index 138ac88c1461..ff88f52eec98 100644 --- a/Documentation/sound/alsa/soc/overview.txt +++ b/Documentation/sound/alsa/soc/overview.txt @@ -49,18 +49,23 @@ features :- * Machine specific controls: Allow machines to add controls to the sound card (e.g. volume control for speaker amplifier). -To achieve all this, ASoC basically splits an embedded audio system into 3 -components :- +To achieve all this, ASoC basically splits an embedded audio system into +multiple re-usable component drivers :- - * Codec driver: The codec driver is platform independent and contains audio - controls, audio interface capabilities, codec DAPM definition and codec IO - functions. + * Codec class drivers: The codec class driver is platform independent and + contains audio controls, audio interface capabilities, codec DAPM + definition and codec IO functions. This class extends to BT, FM and MODEM + ICs if required. Codec class drivers should be generic code that can run + on any architecture and machine. - * Platform driver: The platform driver contains the audio DMA engine and audio - interface drivers (e.g. I2S, AC97, PCM) for that platform. + * Platform class drivers: The platform class driver includes the audio DMA + engine driver, digital audio interface (DAI) drivers (e.g. I2S, AC97, PCM) + and any audio DSP drivers for that platform. - * Machine driver: The machine driver handles any machine specific controls and - audio events (e.g. turning on an amp at start of playback). + * Machine class driver: The machine driver class acts as the glue that + decribes and binds the other component drivers together to form an ALSA + "sound card device". It handles any machine specific controls and + machine level audio events (e.g. turning on an amp at start of playback). Documentation @@ -84,3 +89,7 @@ machine.txt: Machine driver internals. pop_clicks.txt: How to minimise audio artifacts. clocking.txt: ASoC clocking for best power performance. + +jack.txt: ASoC jack detection. + +DPCM.txt: Dynamic PCM - Describes DPCM with DSP examples. diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt index 9f5263d3152c..c4407a41b0fc 100644 --- a/Documentation/static-keys.txt +++ b/Documentation/static-keys.txt @@ -116,7 +116,7 @@ The branch(es) can then be switched via: static_key_slow_dec(&key); Thus, 'static_key_slow_inc()' means 'make the branch true', and -'static_key_slow_dec()' means 'make the the branch false' with appropriate +'static_key_slow_dec()' means 'make the branch false' with appropriate reference counting. For example, if the key is initialized true, a static_key_slow_dec(), will switch the branch to false. And a subsequent static_key_slow_inc(), will change the branch back to true. Likewise, if the @@ -236,7 +236,7 @@ label case adds: If we then include the padding bytes, the jump label code saves, 16 total bytes of instruction memory for this small function. In this case the non-jump label -function is 80 bytes long. Thus, we have have saved 20% of the instruction +function is 80 bytes long. Thus, we have saved 20% of the instruction footprint. We can in fact improve this even further, since the 5-byte no-op really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp. However, we have not yet implemented optimal no-op sizes (they are currently diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 26b7ee491df8..ee9a2f983b99 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -33,6 +33,7 @@ show up in /proc/sys/kernel: - domainname - hostname - hotplug +- kexec_load_disabled - kptr_restrict - kstack_depth_to_print [ X86 only ] - l2cr [ PPC only ] @@ -287,6 +288,18 @@ Default value is "/sbin/hotplug". ============================================================== +kexec_load_disabled: + +A toggle indicating if the kexec_load syscall has been disabled. This +value defaults to 0 (false: kexec_load enabled), but can be set to 1 +(true: kexec_load disabled). Once true, kexec can no longer be used, and +the toggle cannot be set back to false. This allows a kexec image to be +loaded before disabling the syscall, allowing a system to set up (and +later use) an image without it being altered. Generally used together +with the "modules_disabled" sysctl. + +============================================================== + kptr_restrict: This toggle indicates whether restrictions are placed on @@ -331,7 +344,7 @@ A toggle value indicating if modules are allowed to be loaded in an otherwise modular kernel. This toggle defaults to off (0), but can be set true (1). Once true, modules can be neither loaded nor unloaded, and the toggle cannot be set back -to false. +to false. Generally used with the "kexec_load_disabled" toggle. ============================================================== @@ -428,11 +441,6 @@ rate for each task. numa_balancing_scan_size_mb is how many megabytes worth of pages are scanned for a given scan. -numa_balancing_settle_count is how many scan periods must complete before -the schedule balancer stops pushing the task towards a preferred node. This -gives the scheduler a chance to place the task on an alternative node if the -preferred node is overloaded. - numa_balancing_migrate_deferred is how many page migrations get skipped unconditionally, after a page migration is skipped because a page is shared with other tasks. This reduces page migration overhead, and determines diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 1fbd4eb7b64a..9f5481bdc5a4 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -47,6 +47,7 @@ Currently, these files are in /proc/sys/vm: - numa_zonelist_order - oom_dump_tasks - oom_kill_allocating_task +- overcommit_kbytes - overcommit_memory - overcommit_ratio - page-cluster @@ -574,6 +575,17 @@ The default value is 0. ============================================================== +overcommit_kbytes: + +When overcommit_memory is set to 2, the committed address space is not +permitted to exceed swap plus this amount of physical RAM. See below. + +Note: overcommit_kbytes is the counterpart of overcommit_ratio. Only one +of them may be specified at a time. Setting one disables the other (which +then appears as 0 when read). + +============================================================== + overcommit_memory: This value contains a flag that enables memory overcommitment. diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 37732a220d33..c94435df2037 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -287,3 +287,210 @@ their old filters): prev_pid == 0 # cat sched_wakeup/filter common_pid == 0 + +6. Event triggers +================= + +Trace events can be made to conditionally invoke trigger 'commands' +which can take various forms and are described in detail below; +examples would be enabling or disabling other trace events or invoking +a stack trace whenever the trace event is hit. Whenever a trace event +with attached triggers is invoked, the set of trigger commands +associated with that event is invoked. Any given trigger can +additionally have an event filter of the same form as described in +section 5 (Event filtering) associated with it - the command will only +be invoked if the event being invoked passes the associated filter. +If no filter is associated with the trigger, it always passes. + +Triggers are added to and removed from a particular event by writing +trigger expressions to the 'trigger' file for the given event. + +A given event can have any number of triggers associated with it, +subject to any restrictions that individual commands may have in that +regard. + +Event triggers are implemented on top of "soft" mode, which means that +whenever a trace event has one or more triggers associated with it, +the event is activated even if it isn't actually enabled, but is +disabled in a "soft" mode. That is, the tracepoint will be called, +but just will not be traced, unless of course it's actually enabled. +This scheme allows triggers to be invoked even for events that aren't +enabled, and also allows the current event filter implementation to be +used for conditionally invoking triggers. + +The syntax for event triggers is roughly based on the syntax for +set_ftrace_filter 'ftrace filter commands' (see the 'Filter commands' +section of Documentation/trace/ftrace.txt), but there are major +differences and the implementation isn't currently tied to it in any +way, so beware about making generalizations between the two. + +6.1 Expression syntax +--------------------- + +Triggers are added by echoing the command to the 'trigger' file: + + # echo 'command[:count] [if filter]' > trigger + +Triggers are removed by echoing the same command but starting with '!' +to the 'trigger' file: + + # echo '!command[:count] [if filter]' > trigger + +The [if filter] part isn't used in matching commands when removing, so +leaving that off in a '!' command will accomplish the same thing as +having it in. + +The filter syntax is the same as that described in the 'Event +filtering' section above. + +For ease of use, writing to the trigger file using '>' currently just +adds or removes a single trigger and there's no explicit '>>' support +('>' actually behaves like '>>') or truncation support to remove all +triggers (you have to use '!' for each one added.) + +6.2 Supported trigger commands +------------------------------ + +The following commands are supported: + +- enable_event/disable_event + + These commands can enable or disable another trace event whenever + the triggering event is hit. When these commands are registered, + the other trace event is activated, but disabled in a "soft" mode. + That is, the tracepoint will be called, but just will not be traced. + The event tracepoint stays in this mode as long as there's a trigger + in effect that can trigger it. + + For example, the following trigger causes kmalloc events to be + traced when a read system call is entered, and the :1 at the end + specifies that this enablement happens only once: + + # echo 'enable_event:kmem:kmalloc:1' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger + + The following trigger causes kmalloc events to stop being traced + when a read system call exits. This disablement happens on every + read system call exit: + + # echo 'disable_event:kmem:kmalloc' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_exit_read/trigger + + The format is: + + enable_event:<system>:<event>[:count] + disable_event:<system>:<event>[:count] + + To remove the above commands: + + # echo '!enable_event:kmem:kmalloc:1' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger + + # echo '!disable_event:kmem:kmalloc' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_exit_read/trigger + + Note that there can be any number of enable/disable_event triggers + per triggering event, but there can only be one trigger per + triggered event. e.g. sys_enter_read can have triggers enabling both + kmem:kmalloc and sched:sched_switch, but can't have two kmem:kmalloc + versions such as kmem:kmalloc and kmem:kmalloc:1 or 'kmem:kmalloc if + bytes_req == 256' and 'kmem:kmalloc if bytes_alloc == 256' (they + could be combined into a single filter on kmem:kmalloc though). + +- stacktrace + + This command dumps a stacktrace in the trace buffer whenever the + triggering event occurs. + + For example, the following trigger dumps a stacktrace every time the + kmalloc tracepoint is hit: + + # echo 'stacktrace' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + The following trigger dumps a stacktrace the first 5 times a kmalloc + request happens with a size >= 64K + + # echo 'stacktrace:5 if bytes_req >= 65536' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + The format is: + + stacktrace[:count] + + To remove the above commands: + + # echo '!stacktrace' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # echo '!stacktrace:5 if bytes_req >= 65536' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + The latter can also be removed more simply by the following (without + the filter): + + # echo '!stacktrace:5' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + Note that there can be only one stacktrace trigger per triggering + event. + +- snapshot + + This command causes a snapshot to be triggered whenever the + triggering event occurs. + + The following command creates a snapshot every time a block request + queue is unplugged with a depth > 1. If you were tracing a set of + events or functions at the time, the snapshot trace buffer would + capture those events when the trigger event occured: + + # echo 'snapshot if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + To only snapshot once: + + # echo 'snapshot:1 if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + To remove the above commands: + + # echo '!snapshot if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + # echo '!snapshot:1 if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + Note that there can be only one snapshot trigger per triggering + event. + +- traceon/traceoff + + These commands turn tracing on and off when the specified events are + hit. The parameter determines how many times the tracing system is + turned on and off. If unspecified, there is no limit. + + The following command turns tracing off the first time a block + request queue is unplugged with a depth > 1. If you were tracing a + set of events or functions at the time, you could then examine the + trace buffer to see the sequence of events that led up to the + trigger event: + + # echo 'traceoff:1 if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + To always disable tracing when nr_rq > 1 : + + # echo 'traceoff if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + To remove the above commands: + + # echo '!traceoff:1 if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + # echo '!traceoff if nr_rq > 1' > \ + /sys/kernel/debug/tracing/events/block/block_unplug/trigger + + Note that there can be only one traceon or traceoff trigger per + triggering event. diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl index 4a37c4759cd2..00e425faa2fd 100644 --- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl +++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl @@ -123,7 +123,7 @@ my $regex_writepage; # Static regex used. Specified like this for readability and for use with /o # (process_pid) (cpus ) ( time ) (tpoint ) (details) -my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)'; +my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])(\s*[dX.][Nnp.][Hhs.][0-9a-fA-F.]*|)\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)'; my $regex_statname = '[-0-9]*\s\((.*)\).*'; my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*'; @@ -270,8 +270,8 @@ EVENT_PROCESS: while ($traceevent = <STDIN>) { if ($traceevent =~ /$regex_traceevent/o) { $process_pid = $1; - $timestamp = $3; - $tracepoint = $4; + $timestamp = $4; + $tracepoint = $5; $process_pid =~ /(.*)-([0-9]*)$/; my $process = $1; @@ -299,7 +299,7 @@ EVENT_PROCESS: $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++; $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp; - $details = $5; + $details = $6; if ($details !~ /$regex_direct_begin/o) { print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n"; print " $details\n"; @@ -322,7 +322,7 @@ EVENT_PROCESS: $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency"; } } elsif ($tracepoint eq "mm_vmscan_kswapd_wake") { - $details = $5; + $details = $6; if ($details !~ /$regex_kswapd_wake/o) { print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n"; print " $details\n"; @@ -356,7 +356,7 @@ EVENT_PROCESS: } elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") { $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++; - $details = $5; + $details = $6; if ($details !~ /$regex_wakeup_kswapd/o) { print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n"; print " $details\n"; @@ -366,7 +366,7 @@ EVENT_PROCESS: my $order = $3; $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++; } elsif ($tracepoint eq "mm_vmscan_lru_isolate") { - $details = $5; + $details = $6; if ($details !~ /$regex_lru_isolate/o) { print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n"; print " $details\n"; @@ -387,7 +387,7 @@ EVENT_PROCESS: } $perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty; } elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") { - $details = $5; + $details = $6; if ($details !~ /$regex_lru_shrink_inactive/o) { print "WARNING: Failed to parse mm_vmscan_lru_shrink_inactive as expected\n"; print " $details\n"; @@ -397,7 +397,7 @@ EVENT_PROCESS: my $nr_reclaimed = $4; $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED} += $nr_reclaimed; } elsif ($tracepoint eq "mm_vmscan_writepage") { - $details = $5; + $details = $6; if ($details !~ /$regex_writepage/o) { print "WARNING: Failed to parse mm_vmscan_writepage as expected\n"; print " $details\n"; diff --git a/Documentation/trace/uprobetracer.txt b/Documentation/trace/uprobetracer.txt index d9c3e682312c..f1cf9a34ad9d 100644 --- a/Documentation/trace/uprobetracer.txt +++ b/Documentation/trace/uprobetracer.txt @@ -19,18 +19,44 @@ user to calculate the offset of the probepoint in the object. Synopsis of uprobe_tracer ------------------------- - p[:[GRP/]EVENT] PATH:SYMBOL[+offs] [FETCHARGS] : Set a uprobe - r[:[GRP/]EVENT] PATH:SYMBOL[+offs] [FETCHARGS] : Set a return uprobe (uretprobe) - -:[GRP/]EVENT : Clear uprobe or uretprobe event + p[:[GRP/]EVENT] PATH:OFFSET [FETCHARGS] : Set a uprobe + r[:[GRP/]EVENT] PATH:OFFSET [FETCHARGS] : Set a return uprobe (uretprobe) + -:[GRP/]EVENT : Clear uprobe or uretprobe event GRP : Group name. If omitted, "uprobes" is the default value. EVENT : Event name. If omitted, the event name is generated based - on SYMBOL+offs. + on PATH+OFFSET. PATH : Path to an executable or a library. - SYMBOL[+offs] : Symbol+offset where the probe is inserted. + OFFSET : Offset where the probe is inserted. FETCHARGS : Arguments. Each probe can have up to 128 args. %REG : Fetch register REG + @ADDR : Fetch memory at ADDR (ADDR should be in userspace) + @+OFFSET : Fetch memory at OFFSET (OFFSET from same file as PATH) + $stackN : Fetch Nth entry of stack (N >= 0) + $stack : Fetch stack address. + $retval : Fetch return value.(*) + +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**) + NAME=FETCHARG : Set NAME as the argument name of FETCHARG. + FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types + (u8/u16/u32/u64/s8/s16/s32/s64), "string" and bitfield + are supported. + + (*) only for return probe. + (**) this is useful for fetching a field of data structures. + +Types +----- +Several types are supported for fetch-args. Uprobe tracer will access memory +by given type. Prefix 's' and 'u' means those types are signed and unsigned +respectively. Traced arguments are shown in decimal (signed) or hex (unsigned). +String type is a special type, which fetches a "null-terminated" string from +user space. +Bitfield is another special type, which takes 3 parameters, bit-width, bit- +offset, and container-size (usually 32). The syntax is; + + b<bit-width>@<bit-offset>/<container-size> + Event Profiling --------------- diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt index 80f4ef0eb75b..7d66a8636cb5 100644 --- a/Documentation/usb/gadget_multi.txt +++ b/Documentation/usb/gadget_multi.txt @@ -14,7 +14,7 @@ A CDC ECM (Ethernet) function may be turned on via a Kconfig option and RNDIS can be turned off. If they are both enabled the gadget will have two configurations -- one with RNDIS and another with CDC ECM[3]. -Please not that if you use non-standard configuration (that is enable +Please note that if you use non-standard configuration (that is enable CDC ECM) you may need to change vendor and/or product ID. * Host drivers diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a30035dd4c26..366bf4b47ef4 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2104,7 +2104,7 @@ Returns: 0 on success, -1 on error Allows setting an eventfd to directly trigger a guest interrupt. kvm_irqfd.fd specifies the file descriptor to use as the eventfd and kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When -an event is tiggered on the eventfd, an interrupt is injected into +an event is triggered on the eventfd, an interrupt is injected into the guest using the specified gsi pin. The irqfd is removed using the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd and kvm_irqfd.gsi. @@ -2115,7 +2115,7 @@ interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an additional eventfd in the kvm_irqfd.resamplefd field. When operating in resample mode, posting of an interrupt through kvm_irq.fd asserts the specified gsi in the irqchip. When the irqchip is resampled, such -as from an EOI, the gsi is de-asserted and the user is notifed via +as from an EOI, the gsi is de-asserted and the user is notified via kvm_irqfd.resamplefd. It is the user's responsibility to re-queue the interrupt if the device making use of it still requires service. Note that closing the resamplefd is not sufficient to disable the @@ -2327,7 +2327,7 @@ current state. "addr" is ignored. Capability: basic Architectures: arm, arm64 Type: vcpu ioctl -Parameters: struct struct kvm_vcpu_init (in) +Parameters: struct kvm_vcpu_init (in) Returns: 0 on success; -1 on error Errors: EINVAL: the target is unknown, or the combination of features is invalid. @@ -2391,7 +2391,8 @@ struct kvm_reg_list { This ioctl returns the guest registers that are supported for the KVM_GET_ONE_REG/KVM_SET_ONE_REG calls. -4.85 KVM_ARM_SET_DEVICE_ADDR + +4.85 KVM_ARM_SET_DEVICE_ADDR (deprecated) Capability: KVM_CAP_ARM_SET_DEVICE_ADDR Architectures: arm, arm64 @@ -2429,6 +2430,10 @@ must be called after calling KVM_CREATE_IRQCHIP, but before calling KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the base addresses will return -EEXIST. +Note, this IOCTL is deprecated and the more flexible SET/GET_DEVICE_ATTR API +should be used instead. + + 4.86 KVM_PPC_RTAS_DEFINE_TOKEN Capability: KVM_CAP_PPC_RTAS diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt new file mode 100644 index 000000000000..7f4e91b1316b --- /dev/null +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt @@ -0,0 +1,73 @@ +ARM Virtual Generic Interrupt Controller (VGIC) +=============================================== + +Device types supported: + KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0 + +Only one VGIC instance may be instantiated through either this API or the +legacy KVM_CREATE_IRQCHIP api. The created VGIC will act as the VM interrupt +controller, requiring emulated user-space devices to inject interrupts to the +VGIC instead of directly to CPUs. + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GIC distributor + register mappings. + + KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit) + Base address in the guest physical address space of the GIC virtual cpu + interface register mappings. + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS + Attributes: + The attr field of kvm_device_attr encodes two values: + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | cpu id | offset | + + All distributor regs are (rw, 32-bit) + + The offset is relative to the "Distributor base address" as defined in the + GICv2 specs. Getting or setting such a register has the same effect as + reading or writing the register on the actual hardware from the cpu + specified with cpu id field. Note that most distributor fields are not + banked, but return the same value regardless of the cpu id used to access + the register. + Limitations: + - Priorities are not implemented, and registers are RAZ/WI + Errors: + -ENODEV: Getting or setting this register is not yet supported + -EBUSY: One or more VCPUs are running + + KVM_DEV_ARM_VGIC_GRP_CPU_REGS + Attributes: + The attr field of kvm_device_attr encodes two values: + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | cpu id | offset | + + All CPU interface regs are (rw, 32-bit) + + The offset specifies the offset from the "CPU interface base address" as + defined in the GICv2 specs. Getting or setting such a register has the + same effect as reading or writing the register on the actual hardware. + + The Active Priorities Registers APRn are implementation defined, so we set a + fixed format for our implementation that fits with the model of a "GICv2 + implementation without the security extensions" which we present to the + guest. This interface always exposes four register APR[0-3] describing the + maximum possible 128 preemption levels. The semantics of the register + indicate if any interrupts in a given preemption level are in the active + state by setting the corresponding bit. + + Thus, preemption level X has one or more active interrupts if and only if: + + APRn[X mod 32] == 0b1, where n = X / 32 + + Bits for undefined preemption levels are RAZ/WI. + + Limitations: + - Priorities are not implemented, and registers are RAZ/WI + Errors: + -ENODEV: Getting or setting this register is not yet supported + -EBUSY: One or more VCPUs are running diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virtual/kvm/hypercalls.txt index 022198e389d7..c8d040e27046 100644 --- a/Documentation/virtual/kvm/hypercalls.txt +++ b/Documentation/virtual/kvm/hypercalls.txt @@ -17,6 +17,9 @@ S390: S390 uses diagnose instruction as hypercall (0x500) along with hypercall number in R1. + For further information on the S390 diagnose call as supported by KVM, + refer to Documentation/virtual/kvm/s390-diag.txt. + PowerPC: It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. Return value is placed in R3. @@ -74,7 +77,7 @@ Usage example : A vcpu of a paravirtualized guest that is busywaiting in guest kernel mode for an event to occur (ex: a spinlock to become available) can execute HLT instruction once it has busy-waited for more than a threshold time-interval. Execution of HLT instruction would cause the hypervisor to put -the vcpu to sleep until occurence of an appropriate event. Another vcpu of the +the vcpu to sleep until occurrence of an appropriate event. Another vcpu of the same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall, specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0) is used in the hypercall for future use. diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index f8869410d40c..d68af4dc3006 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -112,7 +112,7 @@ The Dirty bit is lost in this case. In order to avoid this kind of issue, we always treat the spte as "volatile" if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means, -the spte is always atomicly updated in this case. +the spte is always atomically updated in this case. 3): flush tlbs due to spte updated If the spte is updated from writable to readonly, we should flush all TLBs, @@ -125,7 +125,7 @@ be flushed caused by this reason in mmu_spte_update() since this is a common function to update spte (present -> present). Since the spte is "volatile" if it can be updated out of mmu-lock, we always -atomicly update the spte, the race caused by fast page fault can be avoided, +atomically update the spte, the race caused by fast page fault can be avoided, See the comments in spte_has_volatile_bits() and mmu_spte_update(). 3. Reference diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt index 4cd076febb02..4643cde517c4 100644 --- a/Documentation/virtual/kvm/ppc-pv.txt +++ b/Documentation/virtual/kvm/ppc-pv.txt @@ -115,7 +115,7 @@ If any other bit changes in the MSR, please still use mtmsr(d). Patched instructions ==================== -The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions +The "ld" and "std" instructions are transformed to "lwz" and "stw" instructions respectively on 32 bit systems with an added offset of 4 to accommodate for big endianness. diff --git a/Documentation/virtual/kvm/s390-diag.txt b/Documentation/virtual/kvm/s390-diag.txt new file mode 100644 index 000000000000..f1de4fbade15 --- /dev/null +++ b/Documentation/virtual/kvm/s390-diag.txt @@ -0,0 +1,80 @@ +The s390 DIAGNOSE call on KVM +============================= + +KVM on s390 supports the DIAGNOSE call for making hypercalls, both for +native hypercalls and for selected hypercalls found on other s390 +hypervisors. + +Note that bits are numbered as by the usual s390 convention (most significant +bit on the left). + + +General remarks +--------------- + +DIAGNOSE calls by the guest cause a mandatory intercept. This implies +all supported DIAGNOSE calls need to be handled by either KVM or its +userspace. + +All DIAGNOSE calls supported by KVM use the RS-a format: + +-------------------------------------- +| '83' | R1 | R3 | B2 | D2 | +-------------------------------------- +0 8 12 16 20 31 + +The second-operand address (obtained by the base/displacement calculation) +is not used to address data. Instead, bits 48-63 of this address specify +the function code, and bits 0-47 are ignored. + +The supported DIAGNOSE function codes vary by the userspace used. For +DIAGNOSE function codes not specific to KVM, please refer to the +documentation for the s390 hypervisors defining them. + + +DIAGNOSE function code 'X'500' - KVM virtio functions +----------------------------------------------------- + +If the function code specifies 0x500, various virtio-related functions +are performed. + +General register 1 contains the virtio subfunction code. Supported +virtio subfunctions depend on KVM's userspace. Generally, userspace +provides either s390-virtio (subcodes 0-2) or virtio-ccw (subcode 3). + +Upon completion of the DIAGNOSE instruction, general register 2 contains +the function's return code, which is either a return code or a subcode +specific value. + +Subcode 0 - s390-virtio notification and early console printk + Handled by userspace. + +Subcode 1 - s390-virtio reset + Handled by userspace. + +Subcode 2 - s390-virtio set status + Handled by userspace. + +Subcode 3 - virtio-ccw notification + Handled by either userspace or KVM (ioeventfd case). + + General register 2 contains a subchannel-identification word denoting + the subchannel of the virtio-ccw proxy device to be notified. + + General register 3 contains the number of the virtqueue to be notified. + + General register 4 contains a 64bit identifier for KVM usage (the + kvm_io_bus cookie). If general register 4 does not contain a valid + identifier, it is ignored. + + After completion of the DIAGNOSE call, general register 2 may contain + a 64bit identifier (in the kvm_io_bus cookie case). + + See also the virtio standard for a discussion of this hypercall. + + +DIAGNOSE function code 'X'501 - KVM breakpoint +---------------------------------------------- + +If the function code specifies 0x501, breakpoint functions may be performed. +This function code is handled by userspace. diff --git a/Documentation/virtual/kvm/timekeeping.txt b/Documentation/virtual/kvm/timekeeping.txt index df8946377cb6..76808a17ad84 100644 --- a/Documentation/virtual/kvm/timekeeping.txt +++ b/Documentation/virtual/kvm/timekeeping.txt @@ -467,7 +467,7 @@ at any time. This causes problems as the passage of real time, the injection of machine interrupts and the associated clock sources are no longer completely synchronized with real time. -This same problem can occur on native harware to a degree, as SMM mode may +This same problem can occur on native hardware to a degree, as SMM mode may steal cycles from the naturally on X86 systems when SMM mode is used by the BIOS, but not in such an extreme fashion. However, the fact that SMM mode may cause similar problems to virtualization makes it a good justification for diff --git a/Documentation/vm/locking b/Documentation/vm/locking deleted file mode 100644 index f61228bd6395..000000000000 --- a/Documentation/vm/locking +++ /dev/null @@ -1,130 +0,0 @@ -Started Oct 1999 by Kanoj Sarcar <kanojsarcar@yahoo.com> - -The intent of this file is to have an uptodate, running commentary -from different people about how locking and synchronization is done -in the Linux vm code. - -page_table_lock & mmap_sem --------------------------------------- - -Page stealers pick processes out of the process pool and scan for -the best process to steal pages from. To guarantee the existence -of the victim mm, a mm_count inc and a mmdrop are done in swap_out(). -Page stealers hold kernel_lock to protect against a bunch of races. -The vma list of the victim mm is also scanned by the stealer, -and the page_table_lock is used to preserve list sanity against the -process adding/deleting to the list. This also guarantees existence -of the vma. Vma existence is not guaranteed once try_to_swap_out() -drops the page_table_lock. To guarantee the existence of the underlying -file structure, a get_file is done before the swapout() method is -invoked. The page passed into swapout() is guaranteed not to be reused -for a different purpose because the page reference count due to being -present in the user's pte is not released till after swapout() returns. - -Any code that modifies the vmlist, or the vm_start/vm_end/ -vm_flags:VM_LOCKED/vm_next of any vma *in the list* must prevent -kswapd from looking at the chain. - -The rules are: -1. To scan the vmlist (look but don't touch) you must hold the - mmap_sem with read bias, i.e. down_read(&mm->mmap_sem) -2. To modify the vmlist you need to hold the mmap_sem with - read&write bias, i.e. down_write(&mm->mmap_sem) *AND* - you need to take the page_table_lock. -3. The swapper takes _just_ the page_table_lock, this is done - because the mmap_sem can be an extremely long lived lock - and the swapper just cannot sleep on that. -4. The exception to this rule is expand_stack, which just - takes the read lock and the page_table_lock, this is ok - because it doesn't really modify fields anybody relies on. -5. You must be able to guarantee that while holding page_table_lock - or page_table_lock of mm A, you will not try to get either lock - for mm B. - -The caveats are: -1. find_vma() makes use of, and updates, the mmap_cache pointer hint. -The update of mmap_cache is racy (page stealer can race with other code -that invokes find_vma with mmap_sem held), but that is okay, since it -is a hint. This can be fixed, if desired, by having find_vma grab the -page_table_lock. - - -Code that add/delete elements from the vmlist chain are -1. callers of insert_vm_struct -2. callers of merge_segments -3. callers of avl_remove - -Code that changes vm_start/vm_end/vm_flags:VM_LOCKED of vma's on -the list: -1. expand_stack -2. mprotect -3. mlock -4. mremap - -It is advisable that changes to vm_start/vm_end be protected, although -in some cases it is not really needed. Eg, vm_start is modified by -expand_stack(), it is hard to come up with a destructive scenario without -having the vmlist protection in this case. - -The page_table_lock nests with the inode i_mmap_mutex and the kmem cache -c_spinlock spinlocks. This is okay, since the kmem code asks for pages after -dropping c_spinlock. The page_table_lock also nests with pagecache_lock and -pagemap_lru_lock spinlocks, and no code asks for memory with these locks -held. - -The page_table_lock is grabbed while holding the kernel_lock spinning monitor. - -The page_table_lock is a spin lock. - -Note: PTL can also be used to guarantee that no new clones using the -mm start up ... this is a loose form of stability on mm_users. For -example, it is used in copy_mm to protect against a racing tlb_gather_mmu -single address space optimization, so that the zap_page_range (from -truncate) does not lose sending ipi's to cloned threads that might -be spawned underneath it and go to user mode to drag in pte's into tlbs. - -swap_lock --------------- -The swap devices are chained in priority order from the "swap_list" header. -The "swap_list" is used for the round-robin swaphandle allocation strategy. -The #free swaphandles is maintained in "nr_swap_pages". These two together -are protected by the swap_lock. - -The swap_lock also protects all the device reference counts on the -corresponding swaphandles, maintained in the "swap_map" array, and the -"highest_bit" and "lowest_bit" fields. - -The swap_lock is a spinlock, and is never acquired from intr level. - -To prevent races between swap space deletion or async readahead swapins -deciding whether a swap handle is being used, ie worthy of being read in -from disk, and an unmap -> swap_free making the handle unused, the swap -delete and readahead code grabs a temp reference on the swaphandle to -prevent warning messages from swap_duplicate <- read_swap_cache_async. - -Swap cache locking ------------------- -Pages are added into the swap cache with kernel_lock held, to make sure -that multiple pages are not being added (and hence lost) by associating -all of them with the same swaphandle. - -Pages are guaranteed not to be removed from the scache if the page is -"shared": ie, other processes hold reference on the page or the associated -swap handle. The only code that does not follow this rule is shrink_mmap, -which deletes pages from the swap cache if no process has a reference on -the page (multiple processes might have references on the corresponding -swap handle though). lookup_swap_cache() races with shrink_mmap, when -establishing a reference on a scache page, so, it must check whether the -page it located is still in the swapcache, or shrink_mmap deleted it. -(This race is due to the fact that shrink_mmap looks at the page ref -count with pagecache_lock, but then drops pagecache_lock before deleting -the page from the scache). - -do_wp_page and do_swap_page have MP races in them while trying to figure -out whether a page is "shared", by looking at the page_count + swap_count. -To preserve the sum of the counts, the page lock _must_ be acquired before -calling is_page_shared (else processes might switch their swap_count refs -to the page count refs, after the page count ref has been snapshotted). - -Swap device deletion code currently breaks all the scache assumptions, -since it grabs neither mmap_sem nor page_table_lock. diff --git a/Documentation/vm/overcommit-accounting b/Documentation/vm/overcommit-accounting index 8eaa2fc4b8fa..cbfaaa674118 100644 --- a/Documentation/vm/overcommit-accounting +++ b/Documentation/vm/overcommit-accounting @@ -14,8 +14,8 @@ The Linux kernel supports the following overcommit handling modes 2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap + a - configurable percentage (default is 50) of physical RAM. - Depending on the percentage you use, in most situations + configurable amount (default is 50%) of physical RAM. + Depending on the amount you use, in most situations this means a process will not be killed while accessing pages but will receive errors on memory allocation as appropriate. @@ -26,7 +26,8 @@ The Linux kernel supports the following overcommit handling modes The overcommit policy is set via the sysctl `vm.overcommit_memory'. -The overcommit percentage is set via `vm.overcommit_ratio'. +The overcommit amount can be set via `vm.overcommit_ratio' (percentage) +or `vm.overcommit_kbytes' (absolute value). The current overcommit limit and amount committed are viewable in /proc/meminfo as CommitLimit and Committed_AS respectively. diff --git a/Documentation/vme_api.txt b/Documentation/vme_api.txt index 856efa35f6e3..ffe6e22a2ccd 100644 --- a/Documentation/vme_api.txt +++ b/Documentation/vme_api.txt @@ -393,4 +393,14 @@ Slot Detection This function returns the slot ID of the provided bridge. - int vme_slot_get(struct vme_dev *dev); + int vme_slot_num(struct vme_dev *dev); + + +Bus Detection +============= + +This function returns the bus ID of the provided bridge. + + int vme_bus_num(struct vme_dev *dev); + + diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index f4f268c2b826..cb81741d3b0b 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -608,6 +608,9 @@ Protocol: 2.12+ - If 1, the kernel supports the 64-bit EFI handoff entry point given at handover_offset + 0x200. + Bit 4 (read): XLF_EFI_KEXEC + - If 1, the kernel supports kexec EFI boot with EFI runtime support. + Field name: cmdline_size Type: read Offset/size: 0x238/4 diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index 1228b22e142b..5223479291a2 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -78,14 +78,6 @@ APICs no_timer_check Don't check the IO-APIC timer. This can work around problems with incorrect timer initialization on some boards. - - apicmaintimer Run time keeping from the local APIC timer instead - of using the PIT/HPET interrupt for this. This is useful - when the PIT/HPET interrupts are unreliable. - - noapicmaintimer Don't do time keeping using the APIC timer. - Useful when this option was auto selected, but doesn't work. - apicpmtimer Do APIC timer calibration using the pmtimer. Implies apicmaintimer. Useful when your PIT timer is totally @@ -144,11 +136,6 @@ Non Executable Mappings on Enable(default) off Disable -SMP - - additional_cpus=NUM Allow NUM more CPUs for hotplug - (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) - NUMA numa=off Only set up a single NUMA node spanning all memory. @@ -289,16 +276,6 @@ Debugging kstack=N Print N words from the kernel stack in oops dumps. - pagefaulttrace Dump all page faults. Only useful for extreme debugging - and will create a lot of output. - - call_trace=[old|both|newfallback|new] - old: use old inexact backtracer - new: use new exact dwarf2 unwinder - both: print entries from both - newfallback: use new unwinder but fall back to old if it gets - stuck (default) - Miscellaneous nogbpages diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 881582f75c9c..c584a51add15 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -28,4 +28,11 @@ reference. Current X86-64 implementations only support 40 bits of address space, but we support up to 46 bits. This expands into MBZ space in the page tables. +->trampoline_pgd: + +We map EFI runtime services in the aforementioned PGD in the virtual +range of 64Gb (arbitrarily set, can be raised if needed) + +0xffffffef00000000 - 0xffffffff00000000 + -Andi Kleen, Jul 2004 diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index 7fba5aab9ef9..6c914aa87e71 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -112,7 +112,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与 其他关于如何正确地生成补丁的优秀文档包括： "The Perfect Patch" - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt "Linux kernel patch submission format" http://linux.yyz.us/patch-format.html @@ -515,7 +515,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当 想了解它具体应该看起来像什么，请查阅以下文档中的“ChangeLog”章节： “The Perfect Patch” - http://userweb.kernel.org/~akpm/stuff/tpp.txt + http://www.ozlabs.org/~akpm/stuff/tpp.txt 这些事情有时候做起来很难。要在任何方面都做到完美可能需要好几年时间。这是 diff --git a/Documentation/zorro.txt b/Documentation/zorro.txt index d5829d14774a..90a64d52bea2 100644 --- a/Documentation/zorro.txt +++ b/Documentation/zorro.txt @@ -95,8 +95,9 @@ The treatment of these regions depends on the type of Zorro space: ------------- linux/include/linux/zorro.h -linux/include/asm-{m68k,ppc}/zorro.h -linux/include/linux/zorro_ids.h +linux/include/uapi/linux/zorro.h +linux/include/uapi/linux/zorro_ids.h +linux/arch/m68k/include/asm/zorro.h linux/drivers/zorro /proc/bus/zorro |