diff options
Diffstat (limited to 'Documentation')
34 files changed, 252 insertions, 81 deletions
diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml index 1af384250910..0ee0f3386cdf 100644 --- a/Documentation/DocBook/media/v4l/media-types.xml +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -57,10 +57,6 @@ <entry>Connector for a RGB composite signal.</entry> </row> <row> - <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry> - <entry>Connector for a test generator.</entry> - </row> - <row> <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry> <entry>Camera video sensor entity.</entry> </row> diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt index 7b57fc087088..49585b6e1ea2 100644 --- a/Documentation/Intel-IOMMU.txt +++ b/Documentation/Intel-IOMMU.txt @@ -3,7 +3,7 @@ Linux IOMMU Support The architecture spec can be obtained from the below location. -http://www.intel.com/technology/virtualization/ +http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf This guide gives a quick cheat sheet for some basic understanding. diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index 65b3eac8856c..ff49cf901148 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and conventions of cgroup v2. It describes all userland-visible aspects of cgroup including core and specific controller behaviors. All future changes must be reflected in this document. Documentation for -v1 is available under Documentation/cgroup-legacy/. +v1 is available under Documentation/cgroup-v1/. CONTENTS @@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back. Amount of memory used to cache filesystem data, including tmpfs and shared memory. + sock + + Amount of memory used in network transmission buffers + file_mapped Amount of cached filesystem data mapped with mmap() diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index a2bd593881ca..66422d663184 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -23,6 +23,7 @@ Optional properties: during suspend. - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init +- ti,no-idle: When present, the module is never allowed to idle. Example: diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt index ace05992a262..20df350b9ef3 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt @@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following clock-output-names: - "xin24m" - crystal input - required, - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional + - "rmii_clkin" - external EMAC clock - optional Example: Clock controller node: diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 7803e77d85cb..007a5b46256a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -24,9 +24,8 @@ Main node required properties: 1 = edge triggered 4 = level triggered - Cells 4 and beyond are reserved for future use. When the 1st cell - has a value of 0 or 1, cells 4 and beyond act as padding, and may be - ignored. It is recommended that padding cells have a value of 0. + Cells 4 and beyond are reserved for future use and must have a value + of 0 if present. - reg : Specifies base physical address(s) and size of the GIC registers, in the following order: diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt new file mode 100644 index 000000000000..cd1b1cd7b5c4 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -0,0 +1,68 @@ +* Mediatek IOMMU Architecture Implementation + + Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which +uses the ARM Short-Descriptor translation table format for address translation. + + About the M4U Hardware Block Diagram, please check below: + + EMI (External Memory Interface) + | + m4u (Multimedia Memory Management Unit) + | + SMI Common(Smart Multimedia Interface Common) + | + +----------------+------- + | | + | | + SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). + (display) (vdec) + | | + | | + +-----+-----+ +----+----+ + | | | | | | + | | |... | | | ... There are different ports in each larb. + | | | | | | +OVL0 RDMA0 WDMA0 MC PP VLD + + As above, The Multimedia HW will go through SMI and M4U while it +access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain +smi local arbiter and smi common. It will control whether the Multimedia +HW should go though the m4u for translation or bypass it and talk +directly with EMI. And also SMI help control the power domain and clocks for +each local arbiter. + Normally we specify a local arbiter(larb) for each multimedia HW +like display, video decode, and camera. And there are different ports +in each larb. Take a example, There are many ports like MC, PP, VLD in the +video decode local arbiter, all these ports are according to the video HW. + +Required properties: +- compatible : must be "mediatek,mt8173-m4u". +- reg : m4u register base and size. +- interrupts : the interrupt of m4u. +- clocks : must contain one entry for each clock-names. +- clock-names : must be "bclk", It is the block clock of m4u. +- mediatek,larbs : List of phandle to the local arbiters in the current Socs. + Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort + according to the local arbiter index, like larb0, larb1, larb2... +- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. + Specifies the mtk_m4u_id as defined in + dt-binding/memory/mt8173-larb-port.h. + +Example: + iommu: iommu@10205000 { + compatible = "mediatek,mt8173-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>; + #iommu-cells = <1>; + }; + +Example for a client device: + display { + compatible = "mediatek,mt8173-disp"; + iommus = <&iommu M4U_PORT_DISP_OVL0>, + <&iommu M4U_PORT_DISP_RDMA0>; + ... + }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt index 48ffb38f699e..3ed027cfca95 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt @@ -7,23 +7,34 @@ connected to the IPMMU through a port called micro-TLB. Required Properties: - - compatible: Must contain SoC-specific and generic entries from below. + - compatible: Must contain SoC-specific and generic entry below in case + the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU. - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU. - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU. - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU. - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU. - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU. + - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU. - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU. - reg: Base address and size of the IPMMU registers. - interrupts: Specifiers for the MMU fault interrupts. For instances that support secure mode two interrupts must be specified, for non-secure and secure mode, in that order. For instances that don't support secure mode a - single interrupt must be specified. + single interrupt must be specified. Not required for cache IPMMUs. - #iommu-cells: Must be 1. +Optional properties: + + - renesas,ipmmu-main: reference to the main IPMMU instance in two cells. + The first cell is a phandle to the main IPMMU and the second cell is + the interrupt bit number associated with the particular cache IPMMU device. + The interrupt bit number needs to match the main IPMMU IMSSTR register. + Only used by cache IPMMU instances. + + Each bus master connected to an IPMMU must reference the IPMMU in its device node with the following property: diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt index bc620fe32a70..85f068805dd8 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt @@ -23,28 +23,24 @@ MMUs. for window 1, 2 and 3. * M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and the other System MMU on the write channel. -The drivers must consider how to handle those System MMUs. One of the idea is -to implement child devices or sub-devices which are the client devices of the -System MMU. -Note: -The current DT binding for the Exynos System MMU is incomplete. -The following properties can be removed or changed, if found incompatible with -the "Generic IOMMU Binding" support for attaching devices to the IOMMU. +For information on assigning System MMU controller to its peripheral devices, +see generic IOMMU bindings. Required properties: - compatible: Should be "samsung,exynos-sysmmu" - reg: A tuple of base address and size of System MMU registers. +- #iommu-cells: Should be <0>. - interrupt-parent: The phandle of the interrupt controller of System MMU - interrupts: An interrupt specifier for interrupt signal of System MMU, according to the format defined by a particular interrupt controller. -- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock. +- clock-names: Should be "sysmmu" or a pair of "aclk" and "pclk" to gate + SYSMMU core clocks. Optional "master" if the clock to the System MMU is gated by - another gate clock other than "sysmmu". - Exynos4 SoCs, there needs no "master" clock. - Exynos5 SoCs, some System MMUs must have "master" clocks. -- clocks: Required if the System MMU is needed to gate its clock. + another gate clock other core (usually main gate clock + of peripheral device this SYSMMU belongs to). +- clocks: Phandles for respective clocks described by clock-names. - power-domains: Required if the System MMU is needed to gate its power. Please refer to the following document: Documentation/devicetree/bindings/power/pd-samsung.txt @@ -57,6 +53,7 @@ Examples: power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; + iommus = <&sysmmu_gsc0>; }; sysmmu_gsc0: sysmmu@13E80000 { @@ -67,4 +64,5 @@ Examples: clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; power-domains = <&pd_gsc>; + #iommu-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt new file mode 100644 index 000000000000..06a83ceebba7 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -0,0 +1,24 @@ +SMI (Smart Multimedia Interface) Common + +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt + +Required properties: +- compatible : must be "mediatek,mt8173-smi-common" +- reg : the register and size of the SMI block. +- power-domains : a phandle to the power domain of this local arbiter. +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : must contain 2 entries, as follows: + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting + the register. + - "smi" : It's the clock for transfer data and command. + They may be the same if both source clocks are the same. + +Example: + smi_common: smi@14022000 { + compatible = "mediatek,mt8173-smi-common"; + reg = <0 0x14022000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt new file mode 100644 index 000000000000..55ff3b7e0bb9 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -0,0 +1,25 @@ +SMI (Smart Multimedia Interface) Local Arbiter + +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt + +Required properties: +- compatible : must be "mediatek,mt8173-smi-larb" +- reg : the register and size of this local arbiter. +- mediatek,smi : a phandle to the smi_common node. +- power-domains : a phandle to the power domain of this local arbiter. +- clocks : Must contain an entry for each entry in clock-names. +- clock-names: must contain 2 entries, as follows: + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting + the register. + - "smi" : It's the clock for transfer data and command. + +Example: + larb1: larb@16010000 { + compatible = "mediatek,mt8173-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB_CKEN>; + clock-names = "apb", "smi"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 451fef26b4df..10587bdadbbe 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -68,7 +68,7 @@ ethernet@f0b60000 { phy1: ethernet-phy@1 { max-speed = <1000>; reg = <0x1>; - compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-ieee802.3-c22"; }; }; }; @@ -115,7 +115,7 @@ ethernet@f0ba0000 { phy0: ethernet-phy@0 { max-speed = <1000>; reg = <0x0>; - compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-ieee802.3-c22"; }; }; }; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt index 80411b2f0490..ecacfa44b1eb 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -4,8 +4,6 @@ Required properties: - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2". "hisilicon,hns-dsaf-v1" is for hip05. "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612. -- dsa-name: dsa fabric name who provide this interface. - should be "dsafX", X is the dsaf id. - mode: dsa fabric mode string. only support one of dsaf modes like these: "2port-64vf", "6port-16rss", @@ -26,9 +24,8 @@ Required properties: Example: -dsa: dsa@c7000000 { +dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; reg = <0x0 0xC0000000 0x0 0x420000 diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt index 41d19be7011e..e6a9d1c30878 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt @@ -4,8 +4,9 @@ Required properties: - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2". "hisilicon,hns-nic-v1" is for hip05. "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612. -- ae-name: accelerator name who provides this interface, - is simply a name referring to the name of name in the accelerator node. +- ae-handle: accelerator engine handle for hns, + specifies a reference to the associating hardware driver node. + see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt - port-id: is the index of port provided by DSAF (the accelerator). DSAF can connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They are called debug ports. @@ -41,7 +42,7 @@ Example: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [a2 14 e4 4b 56 76]; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c84e92..d0cb8693963b 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,17 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: List of clocks for this device. At least one clock is + mandatory for the core clock. If several clocks are given, then the + clock-names property must be used to identify them. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: List of names corresponding to clocks property; shall be + "core" for core clock and "bus" for the optional bus clock. + Example: diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt index 79384113c2b0..694987d3c17a 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt @@ -38,7 +38,6 @@ Example : phy11: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -48,7 +47,6 @@ Example : }; phy12: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -58,7 +56,6 @@ Example : }; phy13: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -68,7 +65,6 @@ Example : }; phy14: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -85,7 +81,6 @@ Example : phy21: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -95,7 +90,6 @@ Example : }; phy22: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -105,7 +99,6 @@ Example : }; phy23: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -115,7 +108,6 @@ Example : }; phy24: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt index f65606f8d632..491f5bd55203 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux.txt +++ b/Documentation/devicetree/bindings/net/mdio-mux.txt @@ -47,7 +47,6 @@ Example : phy11: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -57,7 +56,6 @@ Example : }; phy12: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -67,7 +65,6 @@ Example : }; phy13: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -77,7 +74,6 @@ Example : }; phy14: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -94,7 +90,6 @@ Example : phy21: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -104,7 +99,6 @@ Example : }; phy22: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -114,7 +108,6 @@ Example : }; phy23: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -124,7 +117,6 @@ Example : }; phy24: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 525e1658f2da..bc1c3c8bf8fa 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -17,8 +17,7 @@ Optional Properties: "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 specifications. If neither of these are specified, the default is to - assume clause 22. The compatible list may also contain other - elements. + assume clause 22. If the phy's identifier is known then the list may contain an entry of the form: "ethernet-phy-idAAAA.BBBB" where @@ -28,6 +27,9 @@ Optional Properties: 4 hex digits. This is the chip vendor OUI bits 19:24, followed by 10 bits of a vendor specific ID. + The compatible list should not contain other values than those + listed here. + - max-speed: Maximum PHY supported speed (10, 100, 1000...) - broken-turn-around: If set, indicates the PHY device does not correctly diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 81a9f9e6b45f..c8ac222eac67 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -82,8 +82,8 @@ Example: "ch16", "ch17", "ch18", "ch19", "ch20", "ch21", "ch22", "ch23", "ch24"; - clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&cpg>; phy-mode = "rgmii-id"; phy-handle = <&phy0>; diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 4e8b90e43dd8..07a75094c5a8 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -8,6 +8,7 @@ OHCI and EHCI controllers. Required properties: - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; "renesas,pci-r8a7791" for the R8A7791 SoC; + "renesas,pci-r8a7793" for the R8A7793 SoC; "renesas,pci-r8a7794" for the R8A7794 SoC; "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 558fe528ae19..6cf99690eef9 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -4,6 +4,7 @@ Required properties: compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; + "renesas,pcie-r8a7793" for the R8A7793 SoC; "renesas,pcie-r8a7795" for the R8A7795 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index d18109657da6..4f05d208c95c 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -26,11 +26,7 @@ Example: ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: dcdc1 { - reg = <0>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -38,7 +34,6 @@ Example: }; dcdc2_reg: dcdc2 { - reg = <1>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -46,7 +41,6 @@ Example: }; dcdc3_reg: dcc3 { - reg = <2>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1500000>; regulator-boot-on; @@ -54,7 +48,6 @@ Example: }; ldo1_reg: ldo1 { - reg = <3>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -62,7 +55,6 @@ Example: }; ldo2_reg: ldo2 { - reg = <4>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -70,7 +62,6 @@ Example: }; ldo3_reg: ldo3 { - reg = <5>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -78,7 +69,6 @@ Example: }; ldo4_reg: ldo4 { - reg = <6>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index ac2fcd6ff4b8..1068ffce9f91 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -14,6 +14,10 @@ Required properties: interrupt number is the rtc alarm interrupt and second interrupt number is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. +- clocks: Must contain a list of phandle and clock specifier for the rtc + and source clocks. +- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the + same order as the clocks property. Example: @@ -21,4 +25,6 @@ Example: compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <44 0 45 0>; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 35ae1fb3537f..ed94c217c98d 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,7 +9,7 @@ Optional properties: - fsl,uart-has-rtscts : Indicate the uart has rts and cts - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works - is DCE mode by default. + in DCE mode by default. Note: Each uart controller should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index ce55c0a6f757..4da41bf1888e 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -30,6 +30,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-sgtl5000" (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt) + "fsl,imx-audio-wm8960" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 332e625f6ed0..e5ee3f159893 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -1,8 +1,9 @@ * Renesas R-Car Thermal Required properties: -- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal" - as fallback. +- compatible : "renesas,thermal-<soctype>", + "renesas,rcar-gen2-thermal" (with thermal-zone) or + "renesas,rcar-thermal" (without thermal-zone) as fallback. Examples with soctypes are: - "renesas,thermal-r8a73a4" (R-Mobile APE6) - "renesas,thermal-r8a7779" (R-Car H1) @@ -36,3 +37,35 @@ thermal@e61f0000 { 0xe61f0300 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; + +Example (with thermal-zone): + +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; +}; + +thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; +}; diff --git a/Documentation/filesystems/efivarfs.txt b/Documentation/filesystems/efivarfs.txt index c477af086e65..686a64bba775 100644 --- a/Documentation/filesystems/efivarfs.txt +++ b/Documentation/filesystems/efivarfs.txt @@ -14,3 +14,10 @@ filesystem. efivarfs is typically mounted like this, mount -t efivarfs none /sys/firmware/efi/efivars + +Due to the presence of numerous firmware bugs where removing non-standard +UEFI variables causes the system firmware to fail to POST, efivarfs +files that are not well-known standardized variables are created +as immutable files. This doesn't prevent removal - "chattr -i" will work - +but it does prevent this kind of failure from being accomplished +accidentally. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fde9fd06fa98..843b045b4069 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1) RssFile size of resident file mappings RssShmem size of resident shmem memory (includes SysV shm, mapping of tmpfs and shared anonymous mappings) - VmData size of data, stack, and text segments - VmStk size of data, stack, and text segments + VmData size of private data segments + VmStk size of stack segments VmExe size of text segment VmLib size of shared library code VmPTE size of page table entries @@ -356,7 +356,7 @@ address perms offset dev inode pathname a7cb1000-a7cb2000 ---p 00000000 00:00 0 a7cb2000-a7eb2000 rw-p 00000000 00:00 0 a7eb2000-a7eb3000 ---p 00000000 00:00 0 -a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack:1001] +a7eb3000-a7ed5000 rw-p 00000000 00:00 0 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6 @@ -388,7 +388,6 @@ is not associated with a file: [heap] = the heap of the program [stack] = the stack of the main process - [stack:1001] = the stack of the thread with tid 1001 [vdso] = the "virtual dynamic shared object", the kernel system call handler @@ -396,10 +395,8 @@ is not associated with a file: The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint of the individual tasks of a process. In this file you will see a mapping marked -as [stack] if that task sees it as a stack. This is a key difference from the -content of /proc/PID/maps, where you will see all mappings that are being used -as stack by all of those tasks. Hence, for the example above, the task-level -map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this: +as [stack] if that task sees it as a stack. Hence, for the example above, the +task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this: 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 87d40a72f6a1..9a53c929f017 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. could change it dynamically, usually by /sys/module/printk/parameters/ignore_loglevel. + ignore_rlimit_data + Ignore RLIMIT_DATA setting for data mappings, + print warning at first misuse. Can be changed via + /sys/module/kernel/parameters/ignore_rlimit_data. + ihash_entries= [KNL] Set number of hash buckets for inode cache. @@ -4230,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. The default value of this parameter is determined by the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT. + workqueue.debug_force_rr_cpu + Workqueue used to implicitly guarantee that work + items queued without explicit CPU specified are put + on the local CPU. This guarantee is no longer true + and while local CPU is still preferred work items + may be put on foreign CPUs. This debug option + forces round-robin CPU selection to flush out + usages which depend on the now broken guarantee. + When enabled, memory and cache locality will be + impacted. + x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of default x2apic cluster mode on platforms supporting x2apic. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ceb44a095a27..73b36d7c7b0d 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -594,7 +594,7 @@ tcp_fastopen - INTEGER tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt - will be retransmitted. Should not be higher than 255. Default value + will be retransmitted. Should not be higher than 127. Default value is 6, which corresponds to 63seconds till the last retransmission with the current initial RTO of 1second. With this the final timeout for an active TCP connection attempt will happen after 127seconds. diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt index 767392ffd31e..a484d2c109d7 100644 --- a/Documentation/timers/hpet.txt +++ b/Documentation/timers/hpet.txt @@ -1,9 +1,7 @@ High Precision Event Timer Driver for Linux The High Precision Event Timer (HPET) hardware follows a specification -by Intel and Microsoft which can be found at - - http://www.intel.com/hardwaredesign/hpetspec_1.pdf +by Intel and Microsoft, revision 1. Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision") and up to 32 comparators. Normally three or more comparators are provided, diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 053f613fc9a9..07e4cdf02407 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3025,7 +3025,7 @@ len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0 and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq), which is the maximum number of possibly pending cpu-local interrupts. -4.90 KVM_SMI +4.96 KVM_SMI Capability: KVM_CAP_X86_SMM Architectures: x86 diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index daf9c0f742d2..c81731096a43 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -358,7 +358,8 @@ In the first case there are two additional complications: - if CR4.SMEP is enabled: since we've turned the page into a kernel page, the kernel may now execute it. We handle this by also setting spte.nx. If we get a user fetch or read fault, we'll change spte.u=1 and - spte.nx=gpte.nx back. + spte.nx=gpte.nx back. For this to work, KVM forces EFER.NX to 1 when + shadow paging is in use. - if CR4.SMAP is disabled: since the page has been changed to a kernel page, it can not be reused when CR4.SMAP is enabled. We set CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index 9f9ec9f76039..4e4b6f10d841 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -400,3 +400,7 @@ wm8350_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- +sun4v_wdt: +timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000) +nowayout: Watchdog cannot be stopped once started +------------------------------------------------- |