diff options
Diffstat (limited to '')
286 files changed, 14812 insertions, 5848 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 27edc06e2495..bf3b48f022dc 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -189,7 +189,8 @@ Description: Access: Read Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", - "Watchdog timer expire", "Safety timer expire" + "Watchdog timer expire", "Safety timer expire", + "Over current" What: /sys/class/power_supply/<supply_name>/precharge_current Date: June 2017 diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index aedeae1e8ec1..1a6cd5397129 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -1,37 +1,40 @@ What: /sys/fs/f2fs/<disk>/gc_max_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the maximun sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the maximum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_min_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the minimum sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the minimum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_no_gc_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the default sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the default sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_idle Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the victim selection policy for garbage collection. +Description: Controls the victim selection policy for garbage collection. + Setting gc_idle = 0(default) will disable this option. Setting + gc_idle = 1 will select the Cost Benefit approach & setting + gc_idle = 2 will select the greedy approach. What: /sys/fs/f2fs/<disk>/reclaim_segments Date: October 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the issue rate of segment discard commands. - -What: /sys/fs/f2fs/<disk>/max_blkaddr +Description: This parameter controls the number of prefree segments to be + reclaimed. If the number of prefree segments is larger than + the number of segments in the proportion to the percentage + over total volume size, f2fs tries to conduct checkpoint to + reclaim the prefree segments to free segments. + By default, 5% over total # of segments. + +What: /sys/fs/f2fs/<disk>/main_blkaddr Date: November 2019 Contact: "Ramon Pantin" <pantin@google.com> Description: @@ -40,227 +43,278 @@ Description: What: /sys/fs/f2fs/<disk>/ipu_policy Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the in-place-update policy. +Description: Controls the in-place-update policy. + updates in f2fs. User can set: + 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, + 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, + 0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC, + 0x40: F2FS_IPU_NOCACHE. + Refer segment.h for details. What: /sys/fs/f2fs/<disk>/min_ipu_util Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the FS utilization condition for the in-place-update - policies. +Description: Controls the FS utilization condition for the in-place-update + policies. It is used by F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. What: /sys/fs/f2fs/<disk>/min_fsync_blocks Date: September 2014 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for the in-place-update - policies. +Description: Controls the dirty page count condition for the in-place-update + policies. What: /sys/fs/f2fs/<disk>/min_seq_blocks Date: August 2018 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for batched sequential - writes in ->writepages. - +Description: Controls the dirty page count condition for batched sequential + writes in writepages. What: /sys/fs/f2fs/<disk>/min_hot_blocks Date: March 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for redefining hot data. +Description: Controls the dirty page count condition for redefining hot data. What: /sys/fs/f2fs/<disk>/min_ssr_sections Date: October 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls the fee section threshold to trigger SSR allocation. +Description: Controls the free section threshold to trigger SSR allocation. + If this is large, SSR mode will be enabled early. What: /sys/fs/f2fs/<disk>/max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the issue rate of small discard commands. +Description: Controls the issue rate of discard commands that consist of small + blocks less than 2MB. The candidates to be discarded are cached until + checkpoint is triggered, and issued during the checkpoint. + By default, it is disabled with 0. -What: /sys/fs/f2fs/<disk>/discard_granularity -Date: July 2017 -Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls discard granularity of inner discard thread, inner thread +What: /sys/fs/f2fs/<disk>/discard_granularity +Date: July 2017 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: Controls discard granularity of inner discard thread. Inner thread will not issue discards with size that is smaller than granularity. - The unit size is one block, now only support configuring in range - of [1, 512]. + The unit size is one block(4KB), now only support configuring + in range of [1, 512]. Default value is 4(=16KB). -What: /sys/fs/f2fs/<disk>/umount_discard_timeout -Date: January 2019 -Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Set timeout to issue discard commands during umount. - Default: 5 secs +What: /sys/fs/f2fs/<disk>/umount_discard_timeout +Date: January 2019 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Set timeout to issue discard commands during umount. + Default: 5 secs What: /sys/fs/f2fs/<disk>/max_victim_search Date: January 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the number of trials to find a victim segment. +Description: Controls the number of trials to find a victim segment + when conducting SSR and cleaning operations. The default value + is 4096 which covers 8GB block address range. What: /sys/fs/f2fs/<disk>/migration_granularity Date: October 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls migration granularity of garbage collection on large - section, it can let GC move partial segment{s} of one section - in one GC cycle, so that dispersing heavy overhead GC to - multiple lightweight one. +Description: Controls migration granularity of garbage collection on large + section, it can let GC move partial segment{s} of one section + in one GC cycle, so that dispersing heavy overhead GC to + multiple lightweight one. What: /sys/fs/f2fs/<disk>/dir_level Date: March 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the directory level for large directory. +Description: Controls the directory level for large directory. If a + directory has a number of files, it can reduce the file lookup + latency by increasing this dir_level value. Otherwise, it + needs to decrease this value to reduce the space overhead. + The default value is 0. What: /sys/fs/f2fs/<disk>/ram_thresh Date: March 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the memory footprint used by f2fs. +Description: Controls the memory footprint used by free nids and cached + nat entries. By default, 1 is set, which indicates + 10 MB / 1 GB RAM. What: /sys/fs/f2fs/<disk>/batched_trim_sections Date: February 2015 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the trimming rate in batch mode. - <deprecated> +Description: Controls the trimming rate in batch mode. + <deprecated> What: /sys/fs/f2fs/<disk>/cp_interval Date: October 2015 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the checkpoint timing. +Description: Controls the checkpoint timing, set to 60 seconds by default. What: /sys/fs/f2fs/<disk>/idle_interval Date: January 2016 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the idle timing for all paths other than - discard and gc path. +Description: Controls the idle timing of system, if there is no FS operation + during given interval. + Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/discard_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> Contact: "Sahitya Tummala" <stummala@codeaurora.org> -Description: - Controls the idle timing for discard path. +Description: Controls the idle timing of discard thread given + this time interval. + Default is 5 secs. What: /sys/fs/f2fs/<disk>/gc_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> Contact: "Sahitya Tummala" <stummala@codeaurora.org> -Description: - Controls the idle timing for gc path. +Description: Controls the idle timing for gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/iostat_enable Date: August 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls to enable/disable IO stat. +Description: Controls to enable/disable IO stat. What: /sys/fs/f2fs/<disk>/ra_nid_pages Date: October 2015 Contact: "Chao Yu" <chao2.yu@samsung.com> -Description: - Controls the count of nid pages to be readaheaded. +Description: Controls the count of nid pages to be readaheaded. + When building free nids, F2FS reads NAT blocks ahead for + speed up. Default is 0. What: /sys/fs/f2fs/<disk>/dirty_nats_ratio Date: January 2016 Contact: "Chao Yu" <chao2.yu@samsung.com> -Description: - Controls dirty nat entries ratio threshold, if current - ratio exceeds configured threshold, checkpoint will - be triggered for flushing dirty nat entries. +Description: Controls dirty nat entries ratio threshold, if current + ratio exceeds configured threshold, checkpoint will + be triggered for flushing dirty nat entries. What: /sys/fs/f2fs/<disk>/lifetime_write_kbytes Date: January 2016 Contact: "Shuoran Liu" <liushuoran@huawei.com> -Description: - Shows total written kbytes issued to disk. +Description: Shows total written kbytes issued to disk. What: /sys/fs/f2fs/<disk>/features Date: July 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Shows all enabled features in current device. +Description: Shows all enabled features in current device. What: /sys/fs/f2fs/<disk>/inject_rate Date: May 2016 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls the injection rate. +Description: Controls the injection rate of arbitrary faults. What: /sys/fs/f2fs/<disk>/inject_type Date: May 2016 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls the injection type. +Description: Controls the injection type of arbitrary faults. + +What: /sys/fs/f2fs/<disk>/dirty_segments +Date: October 2017 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Shows the number of dirty segments. What: /sys/fs/f2fs/<disk>/reserved_blocks Date: June 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls target reserved blocks in system, the threshold - is soft, it could exceed current available user space. +Description: Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. What: /sys/fs/f2fs/<disk>/current_reserved_blocks Date: October 2017 Contact: "Yunlong Song" <yunlong.song@huawei.com> Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Shows current reserved blocks in system, it may be temporarily - smaller than target_reserved_blocks, but will gradually - increase to target_reserved_blocks when more free blocks are - freed by user later. +Description: Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs/<disk>/gc_urgent Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Do background GC agressively +Description: Do background GC agressively when set. When gc_urgent = 1, + background thread starts to do GC by given gc_urgent_sleep_time + interval. It is set to 0 by default. What: /sys/fs/f2fs/<disk>/gc_urgent_sleep_time Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls sleep time of GC urgent mode +Description: Controls sleep time of GC urgent mode. Set to 500ms by default. What: /sys/fs/f2fs/<disk>/readdir_ra Date: November 2017 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls readahead inode block in readdir. +Description: Controls readahead inode block in readdir. Enabled by default. + +What: /sys/fs/f2fs/<disk>/gc_pin_file_thresh +Date: January 2018 +Contact: Jaegeuk Kim <jaegeuk@kernel.org> +Description: This indicates how many GC can be failed for the pinned + file. If it exceeds this, F2FS doesn't guarantee its pinning + state. 2048 trials is set by default. What: /sys/fs/f2fs/<disk>/extension_list Date: Feburary 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Used to control configure extension list: - - Query: cat /sys/fs/f2fs/<disk>/extension_list - - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list - - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list - - [h] means add/del hot file extension - - [c] means add/del cold file extension +Description: Used to control configure extension list: + - Query: cat /sys/fs/f2fs/<disk>/extension_list + - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list + - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list + - [h] means add/del hot file extension + - [c] means add/del cold file extension What: /sys/fs/f2fs/<disk>/unusable Date April 2019 Contact: "Daniel Rosenberg" <drosen@google.com> -Description: - If checkpoint=disable, it displays the number of blocks that are unusable. - If checkpoint=enable it displays the enumber of blocks that would be unusable - if checkpoint=disable were to be set. +Description: If checkpoint=disable, it displays the number of blocks that + are unusable. + If checkpoint=enable it displays the enumber of blocks that + would be unusable if checkpoint=disable were to be set. What: /sys/fs/f2fs/<disk>/encoding Date July 2019 Contact: "Daniel Rosenberg" <drosen@google.com> -Description: - Displays name and version of the encoding set for the filesystem. - If no encoding is set, displays (none) +Description: Displays name and version of the encoding set for the filesystem. + If no encoding is set, displays (none) + +What: /sys/fs/f2fs/<disk>/free_segments +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of free segments in disk. + +What: /sys/fs/f2fs/<disk>/cp_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of checkpoint operations performed on demand. Available when + CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/cp_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of checkpoint operations performed in the background to + free segments. Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of garbage collection operations performed on demand. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of garbage collection operations triggered in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_foreground +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of blocks moved by garbage collection in foreground. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_background +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of blocks moved by garbage collection in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/avg_vblocks +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Average number of valid blocks. + Available when CONFIG_F2FS_STAT_FS=y. diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst index 994cbb660ade..aa2046af69f7 100644 --- a/Documentation/PCI/msi-howto.rst +++ b/Documentation/PCI/msi-howto.rst @@ -283,5 +283,5 @@ or disabled (0). If 0 is found in any of the msi_bus files belonging to bridges between the PCI root and the device, MSIs are disabled. It is also worth checking the device driver to see whether it supports MSIs. -For example, it may contain calls to pci_irq_alloc_vectors() with the +For example, it may contain calls to pci_alloc_irq_vectors() with the PCI_IRQ_MSI or PCI_IRQ_MSIX flags. diff --git a/Documentation/admin-guide/blockdev/zram.rst b/Documentation/admin-guide/blockdev/zram.rst index 6eccf13219ff..27c77d853028 100644 --- a/Documentation/admin-guide/blockdev/zram.rst +++ b/Documentation/admin-guide/blockdev/zram.rst @@ -1,15 +1,15 @@ ======================================== -zram: Compressed RAM based block devices +zram: Compressed RAM-based block devices ======================================== Introduction ============ -The zram module creates RAM based block devices named /dev/zram<id> +The zram module creates RAM-based block devices named /dev/zram<id> (<id> = 0, 1, ...). Pages written to these disks are compressed and stored in memory itself. These disks allow very fast I/O and compression provides -good amounts of memory savings. Some of the usecases include /tmp storage, -use as swap disks, various caches under /var and maybe many more :) +good amounts of memory savings. Some of the use cases include /tmp storage, +use as swap disks, various caches under /var and maybe many more. :) Statistics for individual zram devices are exported through sysfs nodes at /sys/block/zram<id>/ @@ -43,17 +43,17 @@ The list of possible return codes: ======== ============================================================= -EBUSY an attempt to modify an attribute that cannot be changed once - the device has been initialised. Please reset device first; + the device has been initialised. Please reset device first. -ENOMEM zram was not able to allocate enough memory to fulfil your - needs; + needs. -EINVAL invalid input has been provided. ======== ============================================================= -If you use 'echo', the returned value that is changed by 'echo' utility, +If you use 'echo', the returned value is set by the 'echo' utility, and, in general case, something like:: echo 3 > /sys/block/zram0/max_comp_streams - if [ $? -ne 0 ]; + if [ $? -ne 0 ]; then handle_error fi @@ -65,7 +65,8 @@ should suffice. :: modprobe zram num_devices=4 - This creates 4 devices: /dev/zram{0,1,2,3} + +This creates 4 devices: /dev/zram{0,1,2,3} num_devices parameter is optional and tells zram how many devices should be pre-created. Default: 1. @@ -73,12 +74,12 @@ pre-created. Default: 1. 2) Set max number of compression streams ======================================== -Regardless the value passed to this attribute, ZRAM will always -allocate multiple compression streams - one per online CPUs - thus +Regardless of the value passed to this attribute, ZRAM will always +allocate multiple compression streams - one per online CPU - thus allowing several concurrent compression operations. The number of allocated compression streams goes down when some of the CPUs become offline. There is no single-compression-stream mode anymore, -unless you are running a UP system or has only 1 CPU online. +unless you are running a UP system or have only 1 CPU online. To find out how many streams are currently available:: @@ -89,7 +90,7 @@ To find out how many streams are currently available:: Using comp_algorithm device attribute one can see available and currently selected (shown in square brackets) compression algorithms, -change selected compression algorithm (once the device is initialised +or change the selected compression algorithm (once the device is initialised there is no way to change compression algorithm). Examples:: @@ -167,9 +168,9 @@ Examples:: zram provides a control interface, which enables dynamic (on-demand) device addition and removal. -In order to add a new /dev/zramX device, perform read operation on hot_add -attribute. This will return either new device's device id (meaning that you -can use /dev/zram<id>) or error code. +In order to add a new /dev/zramX device, perform a read operation on the hot_add +attribute. This will return either the new device's device id (meaning that you +can use /dev/zram<id>) or an error code. Example:: @@ -186,8 +187,8 @@ execute:: Per-device statistics are exported as various nodes under /sys/block/zram<id>/ -A brief description of exported device attributes. For more details please -read Documentation/ABI/testing/sysfs-block-zram. +A brief description of exported device attributes follows. For more details +please read Documentation/ABI/testing/sysfs-block-zram. ====================== ====== =============================================== Name access description @@ -245,7 +246,7 @@ whitespace: File /sys/block/zram<id>/mm_stat -The stat file represents device's mm statistics. It consists of a single +The mm_stat file represents the device's mm statistics. It consists of a single line of text and contains the following stats separated by whitespace: ================ ============================================================= @@ -261,7 +262,7 @@ line of text and contains the following stats separated by whitespace: Unit: bytes mem_limit the maximum amount of memory ZRAM can use to store the compressed data - mem_used_max the maximum amount of memory zram have consumed to + mem_used_max the maximum amount of memory zram has consumed to store the data same_pages the number of same element filled pages written to this disk. No memory is allocated for such pages. @@ -271,7 +272,7 @@ line of text and contains the following stats separated by whitespace: File /sys/block/zram<id>/bd_stat -The stat file represents device's backing device statistics. It consists of +The bd_stat file represents a device's backing device statistics. It consists of a single line of text and contains the following stats separated by whitespace: ============== ============================================================= @@ -316,9 +317,9 @@ To use the feature, admin should set up backing device via:: echo /dev/sda5 > /sys/block/zramX/backing_dev before disksize setting. It supports only partition at this moment. -If admin want to use incompressible page writeback, they could do via:: +If admin wants to use incompressible page writeback, they could do via:: - echo huge > /sys/block/zramX/write + echo huge > /sys/block/zramX/writeback To use idle page writeback, first, user need to declare zram pages as idle:: @@ -326,7 +327,7 @@ as idle:: echo all > /sys/block/zramX/idle From now on, any pages on zram are idle pages. The idle mark -will be removed until someone request access of the block. +will be removed until someone requests access of the block. IOW, unless there is access request, those pages are still idle pages. Admin can request writeback of those idle pages at right timing via:: @@ -341,16 +342,16 @@ to guarantee storage health for entire product life. To overcome the concern, zram supports "writeback_limit" feature. The "writeback_limit_enable"'s default value is 0 so that it doesn't limit -any writeback. IOW, if admin want to apply writeback budget, he should +any writeback. IOW, if admin wants to apply writeback budget, he should enable writeback_limit_enable via:: $ echo 1 > /sys/block/zramX/writeback_limit_enable Once writeback_limit_enable is set, zram doesn't allow any writeback -until admin set the budget via /sys/block/zramX/writeback_limit. +until admin sets the budget via /sys/block/zramX/writeback_limit. (If admin doesn't enable writeback_limit_enable, writeback_limit's value -assigned via /sys/block/zramX/writeback_limit is meaninless.) +assigned via /sys/block/zramX/writeback_limit is meaningless.) If admin want to limit writeback as per-day 400M, he could do it like below:: @@ -361,13 +362,13 @@ like below:: /sys/block/zram0/writeback_limit. $ echo 1 > /sys/block/zram0/writeback_limit_enable -If admin want to allow further write again once the bugdet is exausted, +If admins want to allow further write again once the bugdet is exhausted, he could do it like below:: $ echo $((400<<MB_SHIFT>>4K_SHIFT)) > \ /sys/block/zram0/writeback_limit -If admin want to see remaining writeback budget since he set:: +If admin wants to see remaining writeback budget since last set:: $ cat /sys/block/zramX/writeback_limit @@ -375,12 +376,12 @@ If admin want to disable writeback limit, he could do:: $ echo 0 > /sys/block/zramX/writeback_limit_enable -The writeback_limit count will reset whenever you reset zram(e.g., +The writeback_limit count will reset whenever you reset zram (e.g., system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback happened until you reset the zram to allocate extra writeback budget in next setting is user's job. -If admin want to measure writeback count in a certain period, he could +If admin wants to measure writeback count in a certain period, he could know it via /sys/block/zram0/bd_stat's 3rd column. memory tracking diff --git a/Documentation/admin-guide/device-mapper/dm-raid.rst b/Documentation/admin-guide/device-mapper/dm-raid.rst index f6344675e395..695a2ea1d1ae 100644 --- a/Documentation/admin-guide/device-mapper/dm-raid.rst +++ b/Documentation/admin-guide/device-mapper/dm-raid.rst @@ -419,3 +419,5 @@ Version History rebuild errors. 1.15.0 Fix size extensions not being synchronized in case of new MD bitmap pages allocated; also fix those not occuring after previous reductions + 1.15.1 Fix argument count and arguments for rebuild/write_mostly/journal_(dev|mode) + on the status line. diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index 9bc93f0ce0c9..9443fcef1876 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -92,6 +92,8 @@ Currently Available * efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force the ordering) * Case-insensitive file name lookups +* file-based encryption support (fscrypt) +* file-based verity support (fsverity) [1] Filesystems with a block size of 1k may see a limit imposed by the directory hash tree having a maximum depth of two. diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 4405b7485312..4433f3929481 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -76,6 +76,7 @@ configure specific aspects of kernel behavior to your liking. device-mapper/index efi-stub ext4 + nfs/index gpio/index highuid hw_random diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index ec92120a7952..ddc5ccdd4cd1 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -834,6 +834,18 @@ dump out devices still on the deferred probe list after retrying. + dfltcc= [HW,S390] + Format: { on | off | def_only | inf_only | always } + on: s390 zlib hardware support for compression on + level 1 and decompression (default) + off: No s390 zlib hardware support + def_only: s390 zlib hardware support for deflate + only (compression on level 1) + inf_only: s390 zlib hardware support for inflate + only (decompression) + always: Same as 'on' but ignores the selected compression + level always using hardware support (used for debugging) + dhash_entries= [KNL] Set number of hash buckets for dentry cache. diff --git a/Documentation/filesystems/nfs/fault_injection.txt b/Documentation/admin-guide/nfs/fault_injection.rst index f3a5b0a8ac05..eb029c0c15ce 100644 --- a/Documentation/filesystems/nfs/fault_injection.txt +++ b/Documentation/admin-guide/nfs/fault_injection.rst @@ -1,6 +1,7 @@ +=================== +NFS Fault Injection +=================== -Fault Injection -=============== Fault injection is a method for forcing errors that may not normally occur, or may be difficult to reproduce. Forcing these errors in a controlled environment can help the developer find and fix bugs before their code is shipped in a diff --git a/Documentation/admin-guide/nfs/index.rst b/Documentation/admin-guide/nfs/index.rst new file mode 100644 index 000000000000..6b5a3c90fac5 --- /dev/null +++ b/Documentation/admin-guide/nfs/index.rst @@ -0,0 +1,15 @@ +============= +NFS +============= + +.. toctree:: + :maxdepth: 1 + + nfs-client + nfsroot + nfs-rdma + nfsd-admin-interfaces + nfs-idmapper + pnfs-block-server + pnfs-scsi-server + fault_injection diff --git a/Documentation/filesystems/nfs/nfs.txt b/Documentation/admin-guide/nfs/nfs-client.rst index f2571c8bef74..c4b777c7584b 100644 --- a/Documentation/filesystems/nfs/nfs.txt +++ b/Documentation/admin-guide/nfs/nfs-client.rst @@ -1,3 +1,6 @@ +========== +NFS Client +========== The NFS client ============== @@ -59,10 +62,11 @@ The DNS resolver NFSv4 allows for one server to refer the NFS client to data that has been migrated onto another server by means of the special "fs_locations" -attribute. See - http://tools.ietf.org/html/rfc3530#section-6 -and - http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00 +attribute. See `RFC3530 Section 6: Filesystem Migration and Replication`_ and +`Implementation Guide for Referrals in NFSv4`_. + +.. _RFC3530 Section 6\: Filesystem Migration and Replication: http://tools.ietf.org/html/rfc3530#section-6 +.. _Implementation Guide for Referrals in NFSv4: http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00 The fs_locations information can take the form of either an ip address and a path, or a DNS hostname and a path. The latter requires the NFS client to @@ -78,8 +82,8 @@ Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent' (may be changed using the 'nfs.cache_getent' kernel boot parameter) is run, with two arguments: - - the cache name, "dns_resolve" - - the hostname to resolve + - the cache name, "dns_resolve" + - the hostname to resolve (3) After looking up the corresponding ip address, the helper script writes the result into the rpc_pipefs pseudo-file @@ -94,43 +98,44 @@ Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual script, and <ttl> is the 'time to live' of this cache entry (in units of seconds). - Note: If <ip address> is invalid, say the string "0", then a negative - entry is created, which will cause the kernel to treat the hostname - as having no valid DNS translation. + .. note:: + If <ip address> is invalid, say the string "0", then a negative + entry is created, which will cause the kernel to treat the hostname + as having no valid DNS translation. A basic sample /sbin/nfs_cache_getent ===================================== - -#!/bin/bash -# -ttl=600 -# -cut=/usr/bin/cut -getent=/usr/bin/getent -rpc_pipefs=/var/lib/nfs/rpc_pipefs -# -die() -{ - echo "Usage: $0 cache_name entry_name" - exit 1 -} - -[ $# -lt 2 ] && die -cachename="$1" -cache_path=${rpc_pipefs}/cache/${cachename}/channel - -case "${cachename}" in - dns_resolve) - name="$2" - result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )" - [ -z "${result}" ] && result="0" - ;; - *) - die - ;; -esac -echo "${result} ${name} ${ttl}" >${cache_path} - +.. code-block:: sh + + #!/bin/bash + # + ttl=600 + # + cut=/usr/bin/cut + getent=/usr/bin/getent + rpc_pipefs=/var/lib/nfs/rpc_pipefs + # + die() + { + echo "Usage: $0 cache_name entry_name" + exit 1 + } + + [ $# -lt 2 ] && die + cachename="$1" + cache_path=${rpc_pipefs}/cache/${cachename}/channel + + case "${cachename}" in + dns_resolve) + name="$2" + result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )" + [ -z "${result}" ] && result="0" + ;; + *) + die + ;; + esac + echo "${result} ${name} ${ttl}" >${cache_path} diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/admin-guide/nfs/nfs-idmapper.rst index b86831acd583..58b8e63412d5 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/admin-guide/nfs/nfs-idmapper.rst @@ -1,7 +1,7 @@ +============= +NFS ID Mapper +============= -========= -ID Mapper -========= Id mapper is used by NFS to translate user and group ids into names, and to translate user and group names into ids. Part of this translation involves performing an upcall to userspace to request the information. There are two @@ -20,22 +20,24 @@ legacy rpc.idmap daemon for the id mapping. This result will be stored in a custom NFS idmap cache. -=========== Configuring =========== + The file /etc/request-key.conf will need to be modified so /sbin/request-key can direct the upcall. The following line should be added: -#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ... -#====== ======= =============== =============== =============================== -create id_resolver * * /usr/sbin/nfs.idmap %k %d 600 +``#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...`` +``#====== ======= =============== =============== ===============================`` +``create id_resolver * * /usr/sbin/nfs.idmap %k %d 600`` + This will direct all id_resolver requests to the program /usr/sbin/nfs.idmap. The last parameter, 600, defines how many seconds into the future the key will expire. This parameter is optional for /usr/sbin/nfs.idmap. When the timeout is not specified, nfs.idmap will default to 600 seconds. -id mapper uses for key descriptions: +id mapper uses for key descriptions:: + uid: Find the UID for the given user gid: Find the GID for the given group user: Find the user name for the given UID @@ -45,23 +47,24 @@ You can handle any of these individually, rather than using the generic upcall program. If you would like to use your own program for a uid lookup then you would edit your request-key.conf so it look similar to this: -#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ... -#====== ======= =============== =============== =============================== -create id_resolver uid:* * /some/other/program %k %d 600 -create id_resolver * * /usr/sbin/nfs.idmap %k %d 600 +``#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...`` +``#====== ======= =============== =============== ===============================`` +``create id_resolver uid:* * /some/other/program %k %d 600`` +``create id_resolver * * /usr/sbin/nfs.idmap %k %d 600`` + Notice that the new line was added above the line for the generic program. request-key will find the first matching line and corresponding program. In this case, /some/other/program will handle all uid lookups and /usr/sbin/nfs.idmap will handle gid, user, and group lookups. -See <file:Documentation/security/keys/request-key.rst> for more information +See Documentation/security/keys/request-key.rst for more information about the request-key function. -========= nfs.idmap ========= + nfs.idmap is designed to be called by request-key, and should not be run "by hand". This program takes two arguments, a serialized key and a key description. The serialized key is first converted into a key_serial_t, and diff --git a/Documentation/admin-guide/nfs/nfs-rdma.rst b/Documentation/admin-guide/nfs/nfs-rdma.rst new file mode 100644 index 000000000000..ef0f3678b1fb --- /dev/null +++ b/Documentation/admin-guide/nfs/nfs-rdma.rst @@ -0,0 +1,292 @@ +=================== +Setting up NFS/RDMA +=================== + +:Author: + NetApp and Open Grid Computing (May 29, 2008) + +.. warning:: + This document is probably obsolete. + +Overview +======== + +This document describes how to install and setup the Linux NFS/RDMA client +and server software. + +The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server +was first included in the following release, Linux 2.6.25. + +In our testing, we have obtained excellent performance results (full 10Gbit +wire bandwidth at minimal client CPU) under many workloads. The code passes +the full Connectathon test suite and operates over both Infiniband and iWARP +RDMA adapters. + +Getting Help +============ + +If you get stuck, you can ask questions on the +nfs-rdma-devel@lists.sourceforge.net mailing list. + +Installation +============ + +These instructions are a step by step guide to building a machine for +use with NFS/RDMA. + +- Install an RDMA device + + Any device supported by the drivers in drivers/infiniband/hw is acceptable. + + Testing has been performed using several Mellanox-based IB cards, the + Ammasso AMS1100 iWARP adapter, and the Chelsio cxgb3 iWARP adapter. + +- Install a Linux distribution and tools + + The first kernel release to contain both the NFS/RDMA client and server was + Linux 2.6.25 Therefore, a distribution compatible with this and subsequent + Linux kernel release should be installed. + + The procedures described in this document have been tested with + distributions from Red Hat's Fedora Project (http://fedora.redhat.com/). + +- Install nfs-utils-1.1.2 or greater on the client + + An NFS/RDMA mount point can be obtained by using the mount.nfs command in + nfs-utils-1.1.2 or greater (nfs-utils-1.1.1 was the first nfs-utils + version with support for NFS/RDMA mounts, but for various reasons we + recommend using nfs-utils-1.1.2 or greater). To see which version of + mount.nfs you are using, type: + + .. code-block:: sh + + $ /sbin/mount.nfs -V + + If the version is less than 1.1.2 or the command does not exist, + you should install the latest version of nfs-utils. + + Download the latest package from: http://www.kernel.org/pub/linux/utils/nfs + + Uncompress the package and follow the installation instructions. + + If you will not need the idmapper and gssd executables (you do not need + these to create an NFS/RDMA enabled mount command), the installation + process can be simplified by disabling these features when running + configure: + + .. code-block:: sh + + $ ./configure --disable-gss --disable-nfsv4 + + To build nfs-utils you will need the tcp_wrappers package installed. For + more information on this see the package's README and INSTALL files. + + After building the nfs-utils package, there will be a mount.nfs binary in + the utils/mount directory. This binary can be used to initiate NFS v2, v3, + or v4 mounts. To initiate a v4 mount, the binary must be called + mount.nfs4. The standard technique is to create a symlink called + mount.nfs4 to mount.nfs. + + This mount.nfs binary should be installed at /sbin/mount.nfs as follows: + + .. code-block:: sh + + $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs + + In this location, mount.nfs will be invoked automatically for NFS mounts + by the system mount command. + + .. note:: + mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed + on the NFS client machine. You do not need this specific version of + nfs-utils on the server. Furthermore, only the mount.nfs command from + nfs-utils-1.1.2 is needed on the client. + +- Install a Linux kernel with NFS/RDMA + + The NFS/RDMA client and server are both included in the mainline Linux + kernel version 2.6.25 and later. This and other versions of the Linux + kernel can be found at: https://www.kernel.org/pub/linux/kernel/ + + Download the sources and place them in an appropriate location. + +- Configure the RDMA stack + + Make sure your kernel configuration has RDMA support enabled. Under + Device Drivers -> InfiniBand support, update the kernel configuration + to enable InfiniBand support [NOTE: the option name is misleading. Enabling + InfiniBand support is required for all RDMA devices (IB, iWARP, etc.)]. + + Enable the appropriate IB HCA support (mlx4, mthca, ehca, ipath, etc.) or + iWARP adapter support (amso, cxgb3, etc.). + + If you are using InfiniBand, be sure to enable IP-over-InfiniBand support. + +- Configure the NFS client and server + + Your kernel configuration must also have NFS file system support and/or + NFS server support enabled. These and other NFS related configuration + options can be found under File Systems -> Network File Systems. + +- Build, install, reboot + + The NFS/RDMA code will be enabled automatically if NFS and RDMA + are turned on. The NFS/RDMA client and server are configured via the hidden + SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The + value of SUNRPC_XPRT_RDMA will be: + + #. N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client + and server will not be built + + #. M if both SUNRPC and INFINIBAND are on (M or Y) and at least one is M, + in this case the NFS/RDMA client and server will be built as modules + + #. Y if both SUNRPC and INFINIBAND are Y, in this case the NFS/RDMA client + and server will be built into the kernel + + Therefore, if you have followed the steps above and turned no NFS and RDMA, + the NFS/RDMA client and server will be built. + + Build a new kernel, install it, boot it. + +Check RDMA and NFS Setup +======================== + +Before configuring the NFS/RDMA software, it is a good idea to test +your new kernel to ensure that the kernel is working correctly. +In particular, it is a good idea to verify that the RDMA stack +is functioning as expected and standard NFS over TCP/IP and/or UDP/IP +is working properly. + +- Check RDMA Setup + + If you built the RDMA components as modules, load them at + this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel + card: + + .. code-block:: sh + + $ modprobe ib_mthca + $ modprobe ib_ipoib + + If you are using InfiniBand, make sure there is a Subnet Manager (SM) + running on the network. If your IB switch has an embedded SM, you can + use it. Otherwise, you will need to run an SM, such as OpenSM, on one + of your end nodes. + + If an SM is running on your network, you should see the following: + + .. code-block:: sh + + $ cat /sys/class/infiniband/driverX/ports/1/state + 4: ACTIVE + + where driverX is mthca0, ipath5, ehca3, etc. + + To further test the InfiniBand software stack, use IPoIB (this + assumes you have two IB hosts named host1 and host2): + + .. code-block:: sh + + host1$ ip link set dev ib0 up + host1$ ip address add dev ib0 a.b.c.x + host2$ ip link set dev ib0 up + host2$ ip address add dev ib0 a.b.c.y + host1$ ping a.b.c.y + host2$ ping a.b.c.x + + For other device types, follow the appropriate procedures. + +- Check NFS Setup + + For the NFS components enabled above (client and/or server), + test their functionality over standard Ethernet using TCP/IP or UDP/IP. + +NFS/RDMA Setup +============== + +We recommend that you use two machines, one to act as the client and +one to act as the server. + +One time configuration: +----------------------- + +- On the server system, configure the /etc/exports file and start the NFS/RDMA server. + + Exports entries with the following formats have been tested:: + + /vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash) + /vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash) + + The IP address(es) is(are) the client's IPoIB address for an InfiniBand + HCA or the client's iWARP address(es) for an RNIC. + + .. note:: + The "insecure" option must be used because the NFS/RDMA client does + not use a reserved port. + +Each time a machine boots: +-------------------------- + +- Load and configure the RDMA drivers + + For InfiniBand using a Mellanox adapter: + + .. code-block:: sh + + $ modprobe ib_mthca + $ modprobe ib_ipoib + $ ip li set dev ib0 up + $ ip addr add dev ib0 a.b.c.d + + .. note:: + Please use unique addresses for the client and server! + +- Start the NFS server + + If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in + kernel config), load the RDMA transport module: + + .. code-block:: sh + + $ modprobe svcrdma + + Regardless of how the server was built (module or built-in), start the + server: + + .. code-block:: sh + + $ /etc/init.d/nfs start + + or + + .. code-block:: sh + + $ service nfs start + + Instruct the server to listen on the RDMA transport: + + .. code-block:: sh + + $ echo rdma 20049 > /proc/fs/nfsd/portlist + +- On the client system + + If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in + kernel config), load the RDMA client module: + + .. code-block:: sh + + $ modprobe xprtrdma.ko + + Regardless of how the client was built (module or built-in), use this + command to mount the NFS/RDMA server: + + .. code-block:: sh + + $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt + + To verify that the mount is using RDMA, run "cat /proc/mounts" and check + the "proto" field for the given mount. + + Congratulations! You're using NFS/RDMA! diff --git a/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt b/Documentation/admin-guide/nfs/nfsd-admin-interfaces.rst index 56a96fb08a73..c05926f79054 100644 --- a/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt +++ b/Documentation/admin-guide/nfs/nfsd-admin-interfaces.rst @@ -1,5 +1,6 @@ +================================== Administrative interfaces for nfsd -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +================================== Note that normally these interfaces are used only by the utilities in nfs-utils. @@ -13,18 +14,16 @@ nfsd/threads. Before doing that, NFSD can be told which sockets to listen on by writing to nfsd/portlist; that write may be: - - an ascii-encoded file descriptor, which should refer to a - bound (and listening, for tcp) socket, or - - "transportname port", where transportname is currently either - "udp", "tcp", or "rdma". + - an ascii-encoded file descriptor, which should refer to a + bound (and listening, for tcp) socket, or + - "transportname port", where transportname is currently either + "udp", "tcp", or "rdma". If nfsd is started without doing any of these, then it will create one udp and one tcp listener at port 2049 (see nfsd_init_socks). -On startup, nfsd and lockd grace periods start. - -nfsd is shut down by a write of 0 to nfsd/threads. All locks and state -are thrown away at that point. +On startup, nfsd and lockd grace periods start. nfsd is shut down by a write of +0 to nfsd/threads. All locks and state are thrown away at that point. Between startup and shutdown, the number of threads may be adjusted up or down by additional writes to nfsd/threads or by writes to @@ -34,7 +33,7 @@ For more detail about files under nfsd/ and what they control, see fs/nfsd/nfsctl.c; most of them have detailed comments. Implementation notes -^^^^^^^^^^^^^^^^^^^^ +==================== Note that the rpc server requires the caller to serialize addition and removal of listening sockets, and startup and shutdown of the server. diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/admin-guide/nfs/nfsroot.rst index ae4332464560..82a4fda057f9 100644 --- a/Documentation/filesystems/nfs/nfsroot.txt +++ b/Documentation/admin-guide/nfs/nfsroot.rst @@ -1,27 +1,34 @@ +=============================================== Mounting the root filesystem via NFS (nfsroot) =============================================== -Written 1996 by Gero Kuhlmann <gero@gkminix.han.de> -Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz> -Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org> -Updated 2006 by Horms <horms@verge.net.au> -Updated 2018 by Chris Novakovic <chris@chrisn.me.uk> +:Authors: + Written 1996 by Gero Kuhlmann <gero@gkminix.han.de> + + Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + + Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org> + + Updated 2006 by Horms <horms@verge.net.au> + Updated 2018 by Chris Novakovic <chris@chrisn.me.uk> -In order to use a diskless system, such as an X-terminal or printer server -for example, it is necessary for the root filesystem to be present on a -non-disk device. This may be an initramfs (see Documentation/filesystems/ -ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/admin-guide/initrd.rst) or a -filesystem mounted via NFS. The following text describes on how to use NFS -for the root filesystem. For the rest of this text 'client' means the -diskless system, and 'server' means the NFS server. +In order to use a diskless system, such as an X-terminal or printer server for +example, it is necessary for the root filesystem to be present on a non-disk +device. This may be an initramfs (see +Documentation/filesystems/ramfs-rootfs-initramfs.txt), a ramdisk (see +Documentation/admin-guide/initrd.rst) or a filesystem mounted via NFS. The +following text describes on how to use NFS for the root filesystem. For the rest +of this text 'client' means the diskless system, and 'server' means the NFS +server. -1.) Enabling nfsroot capabilities - ----------------------------- + +Enabling nfsroot capabilities +============================= In order to use nfsroot, NFS client support needs to be selected as built-in during configuration. Once this has been selected, the nfsroot @@ -34,8 +41,8 @@ DHCP, BOOTP and RARP is safe. -2.) Kernel command line - ------------------- +Kernel command line +=================== When the kernel has been loaded by a boot loader (see below) it needs to be told what root fs device to use. And in the case of nfsroot, where to find @@ -44,19 +51,17 @@ This can be established using the following kernel command line parameters: root=/dev/nfs - This is necessary to enable the pseudo-NFS-device. Note that it's not a real device but just a synonym to tell the kernel to use NFS instead of a real device. nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>] - If the `nfsroot' parameter is NOT given on the command line, - the default "/tftpboot/%s" will be used. + the default ``"/tftpboot/%s"`` will be used. <server-ip> Specifies the IP address of the NFS server. - The default address is determined by the `ip' parameter + The default address is determined by the ip parameter (see below). This parameter allows the use of different servers for IP autoconfiguration and NFS. @@ -66,7 +71,8 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>] IP address. <nfs-options> Standard NFS options. All options are separated by commas. - The following defaults are used: + The following defaults are used:: + port = as given by server portmap daemon rsize = 4096 wsize = 4096 @@ -79,13 +85,11 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>] flags = hard, nointr, noposix, cto, ac -ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: - <dns0-ip>:<dns1-ip>:<ntp0-ip> - +ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:<dns0-ip>:<dns1-ip>:<ntp0-ip> This parameter tells the kernel how to configure IP addresses of devices and also how to set up the IP routing table. It was originally called - `nfsaddrs', but now the boot-time IP configuration works independently of - NFS, so it was renamed to `ip' and the old name remained as an alias for + nfsaddrs, but now the boot-time IP configuration works independently of + NFS, so it was renamed to ip and the old name remained as an alias for compatibility reasons. If this parameter is missing from the kernel command line, all fields are @@ -93,17 +97,17 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: this means that the kernel tries to configure everything using autoconfiguration. - The <autoconf> parameter can appear alone as the value to the `ip' + The <autoconf> parameter can appear alone as the value to the ip parameter (without all the ':' characters before). If the value is "ip=off" or "ip=none", no autoconfiguration will take place, otherwise autoconfiguration will take place. The most common way to use this is "ip=dhcp". <client-ip> IP address of the client. - Default: Determined using autoconfiguration. - <server-ip> IP address of the NFS server. If RARP is used to determine + <server-ip> IP address of the NFS server. + If RARP is used to determine the client address and this parameter is NOT empty only replies from the specified server are accepted. @@ -115,19 +119,19 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: (see below). Default: Determined using autoconfiguration. - The address of the autoconfiguration server is used. + The address of the autoconfiguration server is used. <gw-ip> IP address of a gateway if the server is on a different subnet. - Default: Determined using autoconfiguration. - <netmask> Netmask for local network interface. If unspecified - the netmask is derived from the client IP address assuming - classful addressing. + <netmask> Netmask for local network interface. + If unspecified the netmask is derived from the client IP address + assuming classful addressing. Default: Determined using autoconfiguration. - <hostname> Name of the client. If a '.' character is present, anything + <hostname> Name of the client. + If a '.' character is present, anything before the first '.' is used as the client's hostname, and anything after it is used as its NIS domain name. May be supplied by autoconfiguration, but its absence will not trigger autoconfiguration. @@ -138,21 +142,21 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: Default: Client IP address is used in ASCII notation. <device> Name of network device to use. - Default: If the host only has one device, it is used. - Otherwise the device is determined using - autoconfiguration. This is done by sending - autoconfiguration requests out of all devices, - and using the device that received the first reply. - - <autoconf> Method to use for autoconfiguration. In the case of options - which specify multiple autoconfiguration protocols, + Otherwise the device is determined using + autoconfiguration. This is done by sending + autoconfiguration requests out of all devices, + and using the device that received the first reply. + + <autoconf> Method to use for autoconfiguration. + In the case of options + which specify multiple autoconfiguration protocols, requests are sent using all protocols, and the first one to reply is used. Only autoconfiguration protocols that have been compiled into the kernel will be used, regardless of the value of - this option. + this option:: off or none: don't use autoconfiguration (do static IP assignment instead) @@ -221,7 +225,6 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: nfsrootdebug - This parameter enables debugging messages to appear in the kernel log at boot time so that administrators can verify that the correct NFS mount options, server address, and root path are passed to the @@ -229,36 +232,32 @@ nfsrootdebug rdinit=<executable file> - To specify which file contains the program that starts system initialization, administrators can use this command line parameter. The default value of this parameter is "/init". If the specified file exists and the kernel can execute it, root filesystem related - kernel command line parameters, including `nfsroot=', are ignored. + kernel command line parameters, including 'nfsroot=', are ignored. A description of the process of mounting the root file system can be - found in: - - Documentation/driver-api/early-userspace/early_userspace_support.rst - - + found in Documentation/driver-api/early-userspace/early_userspace_support.rst -3.) Boot Loader - ---------- +Boot Loader +=========== To get the kernel into memory different approaches can be used. They depend on various facilities being available: -3.1) Booting from a floppy using syslinux +- Booting from a floppy using syslinux When building kernels, an easy way to create a boot floppy that uses syslinux is to use the zdisk or bzdisk make targets which use zimage and bzimage images respectively. Both targets accept the FDARGS parameter which can be used to set the kernel command line. - e.g. + e.g:: + make bzdisk FDARGS="root=/dev/nfs" Note that the user running this command will need to have @@ -267,32 +266,36 @@ They depend on various facilities being available: For more information on syslinux, including how to create bootdisks for prebuilt kernels, see http://syslinux.zytor.com/ - N.B: Previously it was possible to write a kernel directly to - a floppy using dd, configure the boot device using rdev, and - boot using the resulting floppy. Linux no longer supports this - method of booting. + .. note:: + Previously it was possible to write a kernel directly to + a floppy using dd, configure the boot device using rdev, and + boot using the resulting floppy. Linux no longer supports this + method of booting. -3.2) Booting from a cdrom using isolinux +- Booting from a cdrom using isolinux When building kernels, an easy way to create a bootable cdrom that uses isolinux is to use the isoimage target which uses a bzimage image. Like zdisk and bzdisk, this target accepts the FDARGS parameter which can be used to set the kernel command line. - e.g. + e.g:: + make isoimage FDARGS="root=/dev/nfs" The resulting iso image will be arch/<ARCH>/boot/image.iso This can be written to a cdrom using a variety of tools including cdrecord. - e.g. + e.g:: + cdrecord dev=ATAPI:1,0,0 arch/x86/boot/image.iso For more information on isolinux, including how to create bootdisks for prebuilt kernels, see http://syslinux.zytor.com/ -3.2) Using LILO +- Using LILO + When using LILO all the necessary command line parameters may be specified using the 'append=' directive in the LILO configuration file. @@ -300,15 +303,19 @@ They depend on various facilities being available: However, to use the 'root=' directive you also need to create a dummy root device, which may be removed after LILO is run. - mknod /dev/boot255 c 0 255 + e.g:: + + mknod /dev/boot255 c 0 255 For information on configuring LILO, please refer to its documentation. -3.3) Using GRUB +- Using GRUB + When using GRUB, kernel parameter are simply appended after the kernel specification: kernel <kernel> <parameters> -3.4) Using loadlin +- Using loadlin + loadlin may be used to boot Linux from a DOS command prompt without requiring a local hard disk to mount as root. This has not been thoroughly tested by the authors of this document, but in general @@ -317,7 +324,8 @@ They depend on various facilities being available: Please refer to the loadlin documentation for further information. -3.5) Using a boot ROM +- Using a boot ROM + This is probably the most elegant way of booting a diskless client. With a boot ROM the kernel is loaded using the TFTP protocol. The authors of this document are not aware of any no commercial boot @@ -326,7 +334,8 @@ They depend on various facilities being available: etherboot, both of which are available on sunsite.unc.edu, and both of which contain everything you need to boot a diskless Linux client. -3.6) Using pxelinux +- Using pxelinux + Pxelinux may be used to boot linux using the PXE boot loader which is present on many modern network cards. @@ -342,8 +351,8 @@ They depend on various facilities being available: -4.) Credits - ------- +Credits +======= The nfsroot code in the kernel and the RARP support have been written by Gero Kuhlmann <gero@gkminix.han.de>. diff --git a/Documentation/filesystems/nfs/pnfs-block-server.txt b/Documentation/admin-guide/nfs/pnfs-block-server.rst index 2143673cf154..b00a2e705cc4 100644 --- a/Documentation/filesystems/nfs/pnfs-block-server.txt +++ b/Documentation/admin-guide/nfs/pnfs-block-server.rst @@ -1,4 +1,6 @@ +=================================== pNFS block layout server user guide +=================================== The Linux NFS server now supports the pNFS block layout extension. In this case the NFS server acts as Metadata Server (MDS) for pNFS, which in addition @@ -22,16 +24,19 @@ If the nfsd server needs to fence a non-responding client it calls /sbin/nfsd-recall-failed with the first argument set to the IP address of the client, and the second argument set to the device node without the /dev prefix for the file system to be fenced. Below is an example file that shows -how to translate the device into a serial number from SCSI EVPD 0x80: +how to translate the device into a serial number from SCSI EVPD 0x80:: -cat > /sbin/nfsd-recall-failed << EOF -#!/bin/sh + cat > /sbin/nfsd-recall-failed << EOF -CLIENT="$1" -DEV="/dev/$2" -EVPD=`sg_inq --page=0x80 ${DEV} | \ - grep "Unit serial number:" | \ - awk -F ': ' '{print $2}'` +.. code-block:: sh -echo "fencing client ${CLIENT} serial ${EVPD}" >> /var/log/pnfsd-fence.log -EOF + #!/bin/sh + + CLIENT="$1" + DEV="/dev/$2" + EVPD=`sg_inq --page=0x80 ${DEV} | \ + grep "Unit serial number:" | \ + awk -F ': ' '{print $2}'` + + echo "fencing client ${CLIENT} serial ${EVPD}" >> /var/log/pnfsd-fence.log + EOF diff --git a/Documentation/filesystems/nfs/pnfs-scsi-server.txt b/Documentation/admin-guide/nfs/pnfs-scsi-server.rst index 5bef7268bd9f..d2f6ee558071 100644 --- a/Documentation/filesystems/nfs/pnfs-scsi-server.txt +++ b/Documentation/admin-guide/nfs/pnfs-scsi-server.rst @@ -1,4 +1,5 @@ +================================== pNFS SCSI layout server user guide ================================== diff --git a/Documentation/asm-annotations.rst b/Documentation/asm-annotations.rst index f55c2bb74d00..32ea57483378 100644 --- a/Documentation/asm-annotations.rst +++ b/Documentation/asm-annotations.rst @@ -73,10 +73,11 @@ The new macros are prefixed with the ``SYM_`` prefix and can be divided into three main groups: 1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with - standard C calling conventions, i.e. the stack contains a return address at - the predefined place and a return from the function can happen in a - standard way. When frame pointers are enabled, save/restore of frame - pointer shall happen at the start/end of a function, respectively, too. + standard C calling conventions. For example, on x86, this means that the + stack contains a return address at the predefined place and a return from + the function can happen in a standard way. When frame pointers are enabled, + save/restore of frame pointer shall happen at the start/end of a function, + respectively, too. Checking tools like ``objtool`` should ensure such marked functions conform to these rules. The tools can also easily annotate these functions with diff --git a/Documentation/block/biovecs.rst b/Documentation/block/biovecs.rst index 86fa66c87172..ad303a2569d3 100644 --- a/Documentation/block/biovecs.rst +++ b/Documentation/block/biovecs.rst @@ -47,7 +47,7 @@ Having a real iterator, and making biovecs immutable, has a number of advantages: * Before, iterating over bios was very awkward when you weren't processing - exactly one bvec at a time - for example, bio_copy_data() in fs/bio.c, + exactly one bvec at a time - for example, bio_copy_data() in block/bio.c, which copies the contents of one bio into another. Because the biovecs wouldn't necessarily be the same size, the old code was tricky convoluted - it had to walk two different bios at the same time, keeping both bi_idx and diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index ab0b9ec85506..a501dc1c90d0 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -31,6 +31,7 @@ Core utilities generic-radix-tree memory-allocation mm-api + pin_user_pages gfp_mask-from-fs-io timekeeping boot-time-mm @@ -40,6 +41,7 @@ Core utilities gcc-plugins symbol-namespaces padata + ioctl Interfaces for kernel debugging diff --git a/Documentation/core-api/ioctl.rst b/Documentation/core-api/ioctl.rst new file mode 100644 index 000000000000..c455db0e1627 --- /dev/null +++ b/Documentation/core-api/ioctl.rst @@ -0,0 +1,253 @@ +====================== +ioctl based interfaces +====================== + +ioctl() is the most common way for applications to interface +with device drivers. It is flexible and easily extended by adding new +commands and can be passed through character devices, block devices as +well as sockets and other special file descriptors. + +However, it is also very easy to get ioctl command definitions wrong, +and hard to fix them later without breaking existing applications, +so this documentation tries to help developers get it right. + +Command number definitions +========================== + +The command number, or request number, is the second argument passed to +the ioctl system call. While this can be any 32-bit number that uniquely +identifies an action for a particular driver, there are a number of +conventions around defining them. + +``include/uapi/asm-generic/ioctl.h`` provides four macros for defining +ioctl commands that follow modern conventions: ``_IO``, ``_IOR``, +``_IOW``, and ``_IOWR``. These should be used for all new commands, +with the correct parameters: + +_IO/_IOR/_IOW/_IOWR + The macro name specifies how the argument will be used. It may be a + pointer to data to be passed into the kernel (_IOW), out of the kernel + (_IOR), or both (_IOWR). _IO can indicate either commands with no + argument or those passing an integer value instead of a pointer. + It is recommended to only use _IO for commands without arguments, + and use pointers for passing data. + +type + An 8-bit number, often a character literal, specific to a subsystem + or driver, and listed in :doc:`../userspace-api/ioctl/ioctl-number` + +nr + An 8-bit number identifying the specific command, unique for a give + value of 'type' + +data_type + The name of the data type pointed to by the argument, the command number + encodes the ``sizeof(data_type)`` value in a 13-bit or 14-bit integer, + leading to a limit of 8191 bytes for the maximum size of the argument. + Note: do not pass sizeof(data_type) type into _IOR/_IOW/IOWR, as that + will lead to encoding sizeof(sizeof(data_type)), i.e. sizeof(size_t). + _IO does not have a data_type parameter. + + +Interface versions +================== + +Some subsystems use version numbers in data structures to overload +commands with different interpretations of the argument. + +This is generally a bad idea, since changes to existing commands tend +to break existing applications. + +A better approach is to add a new ioctl command with a new number. The +old command still needs to be implemented in the kernel for compatibility, +but this can be a wrapper around the new implementation. + +Return code +=========== + +ioctl commands can return negative error codes as documented in errno(3); +these get turned into errno values in user space. On success, the return +code should be zero. It is also possible but not recommended to return +a positive 'long' value. + +When the ioctl callback is called with an unknown command number, the +handler returns either -ENOTTY or -ENOIOCTLCMD, which also results in +-ENOTTY being returned from the system call. Some subsystems return +-ENOSYS or -EINVAL here for historic reasons, but this is wrong. + +Prior to Linux 5.5, compat_ioctl handlers were required to return +-ENOIOCTLCMD in order to use the fallback conversion into native +commands. As all subsystems are now responsible for handling compat +mode themselves, this is no longer needed, but it may be important to +consider when backporting bug fixes to older kernels. + +Timestamps +========== + +Traditionally, timestamps and timeout values are passed as ``struct +timespec`` or ``struct timeval``, but these are problematic because of +incompatible definitions of these structures in user space after the +move to 64-bit time_t. + +The ``struct __kernel_timespec`` type can be used instead to be embedded +in other data structures when separate second/nanosecond values are +desired, or passed to user space directly. This is still not ideal though, +as the structure matches neither the kernel's timespec64 nor the user +space timespec exactly. The get_timespec64() and put_timespec64() helper +functions can be used to ensure that the layout remains compatible with +user space and the padding is treated correctly. + +As it is cheap to convert seconds to nanoseconds, but the opposite +requires an expensive 64-bit division, a simple __u64 nanosecond value +can be simpler and more efficient. + +Timeout values and timestamps should ideally use CLOCK_MONOTONIC time, +as returned by ktime_get_ns() or ktime_get_ts64(). Unlike +CLOCK_REALTIME, this makes the timestamps immune from jumping backwards +or forwards due to leap second adjustments and clock_settime() calls. + +ktime_get_real_ns() can be used for CLOCK_REALTIME timestamps that +need to be persistent across a reboot or between multiple machines. + +32-bit compat mode +================== + +In order to support 32-bit user space running on a 64-bit machine, each +subsystem or driver that implements an ioctl callback handler must also +implement the corresponding compat_ioctl handler. + +As long as all the rules for data structures are followed, this is as +easy as setting the .compat_ioctl pointer to a helper function such as +compat_ptr_ioctl() or blkdev_compat_ptr_ioctl(). + +compat_ptr() +------------ + +On the s390 architecture, 31-bit user space has ambiguous representations +for data pointers, with the upper bit being ignored. When running such +a process in compat mode, the compat_ptr() helper must be used to +clear the upper bit of a compat_uptr_t and turn it into a valid 64-bit +pointer. On other architectures, this macro only performs a cast to a +``void __user *`` pointer. + +In an compat_ioctl() callback, the last argument is an unsigned long, +which can be interpreted as either a pointer or a scalar depending on +the command. If it is a scalar, then compat_ptr() must not be used, to +ensure that the 64-bit kernel behaves the same way as a 32-bit kernel +for arguments with the upper bit set. + +The compat_ptr_ioctl() helper can be used in place of a custom +compat_ioctl file operation for drivers that only take arguments that +are pointers to compatible data structures. + +Structure layout +---------------- + +Compatible data structures have the same layout on all architectures, +avoiding all problematic members: + +* ``long`` and ``unsigned long`` are the size of a register, so + they can be either 32-bit or 64-bit wide and cannot be used in portable + data structures. Fixed-length replacements are ``__s32``, ``__u32``, + ``__s64`` and ``__u64``. + +* Pointers have the same problem, in addition to requiring the + use of compat_ptr(). The best workaround is to use ``__u64`` + in place of pointers, which requires a cast to ``uintptr_t`` in user + space, and the use of u64_to_user_ptr() in the kernel to convert + it back into a user pointer. + +* On the x86-32 (i386) architecture, the alignment of 64-bit variables + is only 32-bit, but they are naturally aligned on most other + architectures including x86-64. This means a structure like:: + + struct foo { + __u32 a; + __u64 b; + __u32 c; + }; + + has four bytes of padding between a and b on x86-64, plus another four + bytes of padding at the end, but no padding on i386, and it needs a + compat_ioctl conversion handler to translate between the two formats. + + To avoid this problem, all structures should have their members + naturally aligned, or explicit reserved fields added in place of the + implicit padding. The ``pahole`` tool can be used for checking the + alignment. + +* On ARM OABI user space, structures are padded to multiples of 32-bit, + making some structs incompatible with modern EABI kernels if they + do not end on a 32-bit boundary. + +* On the m68k architecture, struct members are not guaranteed to have an + alignment greater than 16-bit, which is a problem when relying on + implicit padding. + +* Bitfields and enums generally work as one would expect them to, + but some properties of them are implementation-defined, so it is better + to avoid them completely in ioctl interfaces. + +* ``char`` members can be either signed or unsigned, depending on + the architecture, so the __u8 and __s8 types should be used for 8-bit + integer values, though char arrays are clearer for fixed-length strings. + +Information leaks +================= + +Uninitialized data must not be copied back to user space, as this can +cause an information leak, which can be used to defeat kernel address +space layout randomization (KASLR), helping in an attack. + +For this reason (and for compat support) it is best to avoid any +implicit padding in data structures. Where there is implicit padding +in an existing structure, kernel drivers must be careful to fully +initialize an instance of the structure before copying it to user +space. This is usually done by calling memset() before assigning to +individual members. + +Subsystem abstractions +====================== + +While some device drivers implement their own ioctl function, most +subsystems implement the same command for multiple drivers. Ideally the +subsystem has an .ioctl() handler that copies the arguments from and +to user space, passing them into subsystem specific callback functions +through normal kernel pointers. + +This helps in various ways: + +* Applications written for one driver are more likely to work for + another one in the same subsystem if there are no subtle differences + in the user space ABI. + +* The complexity of user space access and data structure layout is done + in one place, reducing the potential for implementation bugs. + +* It is more likely to be reviewed by experienced developers + that can spot problems in the interface when the ioctl is shared + between multiple drivers than when it is only used in a single driver. + +Alternatives to ioctl +===================== + +There are many cases in which ioctl is not the best solution for a +problem. Alternatives include: + +* System calls are a better choice for a system-wide feature that + is not tied to a physical device or constrained by the file system + permissions of a character device node + +* netlink is the preferred way of configuring any network related + objects through sockets. + +* debugfs is used for ad-hoc interfaces for debugging functionality + that does not need to be exposed as a stable interface to applications. + +* sysfs is a good way to expose the state of an in-kernel object + that is not tied to a file descriptor. + +* configfs can be used for more complex configuration than sysfs + +* A custom file system can provide extra flexibility with a simple + user interface but adds a lot of complexity to the implementation. diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst new file mode 100644 index 000000000000..1d490155ecd7 --- /dev/null +++ b/Documentation/core-api/pin_user_pages.rst @@ -0,0 +1,232 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================================== +pin_user_pages() and related calls +==================================================== + +.. contents:: :local: + +Overview +======== + +This document describes the following functions:: + + pin_user_pages() + pin_user_pages_fast() + pin_user_pages_remote() + +Basic description of FOLL_PIN +============================= + +FOLL_PIN and FOLL_LONGTERM are flags that can be passed to the get_user_pages*() +("gup") family of functions. FOLL_PIN has significant interactions and +interdependencies with FOLL_LONGTERM, so both are covered here. + +FOLL_PIN is internal to gup, meaning that it should not appear at the gup call +sites. This allows the associated wrapper functions (pin_user_pages*() and +others) to set the correct combination of these flags, and to check for problems +as well. + +FOLL_LONGTERM, on the other hand, *is* allowed to be set at the gup call sites. +This is in order to avoid creating a large number of wrapper functions to cover +all combinations of get*(), pin*(), FOLL_LONGTERM, and more. Also, the +pin_user_pages*() APIs are clearly distinct from the get_user_pages*() APIs, so +that's a natural dividing line, and a good point to make separate wrapper calls. +In other words, use pin_user_pages*() for DMA-pinned pages, and +get_user_pages*() for other cases. There are four cases described later on in +this document, to further clarify that concept. + +FOLL_PIN and FOLL_GET are mutually exclusive for a given gup call. However, +multiple threads and call sites are free to pin the same struct pages, via both +FOLL_PIN and FOLL_GET. It's just the call site that needs to choose one or the +other, not the struct page(s). + +The FOLL_PIN implementation is nearly the same as FOLL_GET, except that FOLL_PIN +uses a different reference counting technique. + +FOLL_PIN is a prerequisite to FOLL_LONGTERM. Another way of saying that is, +FOLL_LONGTERM is a specific case, more restrictive case of FOLL_PIN. + +Which flags are set by each wrapper +=================================== + +For these pin_user_pages*() functions, FOLL_PIN is OR'd in with whatever gup +flags the caller provides. The caller is required to pass in a non-null struct +pages* array, and the function then pin pages by incrementing each by a special +value. For now, that value is +1, just like get_user_pages*().:: + + Function + -------- + pin_user_pages FOLL_PIN is always set internally by this function. + pin_user_pages_fast FOLL_PIN is always set internally by this function. + pin_user_pages_remote FOLL_PIN is always set internally by this function. + +For these get_user_pages*() functions, FOLL_GET might not even be specified. +Behavior is a little more complex than above. If FOLL_GET was *not* specified, +but the caller passed in a non-null struct pages* array, then the function +sets FOLL_GET for you, and proceeds to pin pages by incrementing the refcount +of each page by +1.:: + + Function + -------- + get_user_pages FOLL_GET is sometimes set internally by this function. + get_user_pages_fast FOLL_GET is sometimes set internally by this function. + get_user_pages_remote FOLL_GET is sometimes set internally by this function. + +Tracking dma-pinned pages +========================= + +Some of the key design constraints, and solutions, for tracking dma-pinned +pages: + +* An actual reference count, per struct page, is required. This is because + multiple processes may pin and unpin a page. + +* False positives (reporting that a page is dma-pinned, when in fact it is not) + are acceptable, but false negatives are not. + +* struct page may not be increased in size for this, and all fields are already + used. + +* Given the above, we can overload the page->_refcount field by using, sort of, + the upper bits in that field for a dma-pinned count. "Sort of", means that, + rather than dividing page->_refcount into bit fields, we simple add a medium- + large value (GUP_PIN_COUNTING_BIAS, initially chosen to be 1024: 10 bits) to + page->_refcount. This provides fuzzy behavior: if a page has get_page() called + on it 1024 times, then it will appear to have a single dma-pinned count. + And again, that's acceptable. + +This also leads to limitations: there are only 31-10==21 bits available for a +counter that increments 10 bits at a time. + +TODO: for 1GB and larger huge pages, this is cutting it close. That's because +when pin_user_pages() follows such pages, it increments the head page by "1" +(where "1" used to mean "+1" for get_user_pages(), but now means "+1024" for +pin_user_pages()) for each tail page. So if you have a 1GB huge page: + +* There are 256K (18 bits) worth of 4 KB tail pages. +* There are 21 bits available to count up via GUP_PIN_COUNTING_BIAS (that is, + 10 bits at a time) +* There are 21 - 18 == 3 bits available to count. Except that there aren't, + because you need to allow for a few normal get_page() calls on the head page, + as well. Fortunately, the approach of using addition, rather than "hard" + bitfields, within page->_refcount, allows for sharing these bits gracefully. + But we're still looking at about 8 references. + +This, however, is a missing feature more than anything else, because it's easily +solved by addressing an obvious inefficiency in the original get_user_pages() +approach of retrieving pages: stop treating all the pages as if they were +PAGE_SIZE. Retrieve huge pages as huge pages. The callers need to be aware of +this, so some work is required. Once that's in place, this limitation mostly +disappears from view, because there will be ample refcounting range available. + +* Callers must specifically request "dma-pinned tracking of pages". In other + words, just calling get_user_pages() will not suffice; a new set of functions, + pin_user_page() and related, must be used. + +FOLL_PIN, FOLL_GET, FOLL_LONGTERM: when to use which flags +========================================================== + +Thanks to Jan Kara, Vlastimil Babka and several other -mm people, for describing +these categories: + +CASE 1: Direct IO (DIO) +----------------------- +There are GUP references to pages that are serving +as DIO buffers. These buffers are needed for a relatively short time (so they +are not "long term"). No special synchronization with page_mkclean() or +munmap() is provided. Therefore, flags to set at the call site are: :: + + FOLL_PIN + +...but rather than setting FOLL_PIN directly, call sites should use one of +the pin_user_pages*() routines that set FOLL_PIN. + +CASE 2: RDMA +------------ +There are GUP references to pages that are serving as DMA +buffers. These buffers are needed for a long time ("long term"). No special +synchronization with page_mkclean() or munmap() is provided. Therefore, flags +to set at the call site are: :: + + FOLL_PIN | FOLL_LONGTERM + +NOTE: Some pages, such as DAX pages, cannot be pinned with longterm pins. That's +because DAX pages do not have a separate page cache, and so "pinning" implies +locking down file system blocks, which is not (yet) supported in that way. + +CASE 3: Hardware with page faulting support +------------------------------------------- +Here, a well-written driver doesn't normally need to pin pages at all. However, +if the driver does choose to do so, it can register MMU notifiers for the range, +and will be called back upon invalidation. Either way (avoiding page pinning, or +using MMU notifiers to unpin upon request), there is proper synchronization with +both filesystem and mm (page_mkclean(), munmap(), etc). + +Therefore, neither flag needs to be set. + +In this case, ideally, neither get_user_pages() nor pin_user_pages() should be +called. Instead, the software should be written so that it does not pin pages. +This allows mm and filesystems to operate more efficiently and reliably. + +CASE 4: Pinning for struct page manipulation only +------------------------------------------------- +Here, normal GUP calls are sufficient, so neither flag needs to be set. + +page_dma_pinned(): the whole point of pinning +============================================= + +The whole point of marking pages as "DMA-pinned" or "gup-pinned" is to be able +to query, "is this page DMA-pinned?" That allows code such as page_mkclean() +(and file system writeback code in general) to make informed decisions about +what to do when a page cannot be unmapped due to such pins. + +What to do in those cases is the subject of a years-long series of discussions +and debates (see the References at the end of this document). It's a TODO item +here: fill in the details once that's worked out. Meanwhile, it's safe to say +that having this available: :: + + static inline bool page_dma_pinned(struct page *page) + +...is a prerequisite to solving the long-running gup+DMA problem. + +Another way of thinking about FOLL_GET, FOLL_PIN, and FOLL_LONGTERM +=================================================================== + +Another way of thinking about these flags is as a progression of restrictions: +FOLL_GET is for struct page manipulation, without affecting the data that the +struct page refers to. FOLL_PIN is a *replacement* for FOLL_GET, and is for +short term pins on pages whose data *will* get accessed. As such, FOLL_PIN is +a "more severe" form of pinning. And finally, FOLL_LONGTERM is an even more +restrictive case that has FOLL_PIN as a prerequisite: this is for pages that +will be pinned longterm, and whose data will be accessed. + +Unit testing +============ +This file:: + + tools/testing/selftests/vm/gup_benchmark.c + +has the following new calls to exercise the new pin*() wrapper functions: + +* PIN_FAST_BENCHMARK (./gup_benchmark -a) +* PIN_BENCHMARK (./gup_benchmark -b) + +You can monitor how many total dma-pinned pages have been acquired and released +since the system was booted, via two new /proc/vmstat entries: :: + + /proc/vmstat/nr_foll_pin_requested + /proc/vmstat/nr_foll_pin_requested + +Those are both going to show zero, unless CONFIG_DEBUG_VM is set. This is +because there is a noticeable performance drop in unpin_user_page(), when they +are activated. + +References +========== + +* `Some slow progress on get_user_pages() (Apr 2, 2019) <https://lwn.net/Articles/784574/>`_ +* `DMA and get_user_pages() (LPC: Dec 12, 2018) <https://lwn.net/Articles/774411/>`_ +* `The trouble with get_user_pages() (Apr 30, 2018) <https://lwn.net/Articles/753027/>`_ + +John Hubbard, October, 2019 diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index e4d66e7c50de..c652d740735d 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -21,8 +21,8 @@ global variables yet. Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later. -Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390 -architectures, and tag-based KASAN is supported only for arm64. +Currently generic KASAN is supported for the x86_64, arm64, xtensa, s390 and +riscv architectures, and tag-based KASAN is supported only for arm64. Usage ----- diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst index bf2095112d89..ea55b2467653 100644 --- a/Documentation/dev-tools/kunit/faq.rst +++ b/Documentation/dev-tools/kunit/faq.rst @@ -29,7 +29,8 @@ Yes, well, mostly. For the most part, the KUnit core framework (what you use to write the tests) can compile to any architecture; it compiles like just another part of the -kernel and runs when the kernel boots. However, there is some infrastructure, +kernel and runs when the kernel boots, or when built as a module, when the +module is loaded. However, there is some infrastructure, like the KUnit Wrapper (``tools/testing/kunit/kunit.py``) that does not support other architectures. diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst index c60d760a0eed..d16a4d2c3a41 100644 --- a/Documentation/dev-tools/kunit/index.rst +++ b/Documentation/dev-tools/kunit/index.rst @@ -49,6 +49,9 @@ to a standalone program that can be run like any other program directly inside of a host operating system; to be clear, it does not require any virtualization support; it is just a regular program. +Alternatively, kunit and kunit tests can be built as modules and tests will +run when the test module is loaded. + KUnit is fast. Excluding build time, from invocation to completion KUnit can run several dozen tests in only 10 to 20 seconds; this might not sound like a big deal to some people, but having such fast and easy to run tests fundamentally diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index b9a065ab681e..7cd56a1993b1 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -539,6 +539,22 @@ Interspersed in the kernel logs you might see the following: Congratulations, you just ran a KUnit test on the x86 architecture! +In a similar manner, kunit and kunit tests can also be built as modules, +so if you wanted to run tests in this way you might add the following config +options to your ``.config``: + +.. code-block:: none + + CONFIG_KUNIT=m + CONFIG_KUNIT_EXAMPLE_TEST=m + +Once the kernel is built and installed, a simple + +.. code-block:: bash + modprobe example-test + +...will run the tests. + Writing new tests for other architectures ----------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index b2a9f9f8430b..96b1dad58253 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -121,7 +121,7 @@ Required properties (in root node): Required nodes: - soc: some node of the RealView platforms must be the SoC - node that contain the SoC-specific devices, withe the compatible + node that contain the SoC-specific devices, with the compatible string set to one of these tuples: "arm,realview-eb-soc", "simple-bus" "arm,realview-pb1176-soc", "simple-bus" diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt deleted file mode 100644 index 771f5d20ae18..000000000000 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ /dev/null @@ -1,706 +0,0 @@ -========================================== -ARM idle states binding description -========================================== - -========================================== -1 - Introduction -========================================== - -ARM systems contain HW capable of managing power consumption dynamically, -where cores can be put in different low-power states (ranging from simple -wfi to power gating) according to OS PM policies. The CPU states representing -the range of dynamic idle states that a processor can enter at run-time, can be -specified through device tree bindings representing the parameters required -to enter/exit specific idle states on a given processor. - -According to the Server Base System Architecture document (SBSA, [3]), the -power states an ARM CPU can be put into are identified by the following list: - -- Running -- Idle_standby -- Idle_retention -- Sleep -- Off - -The power states described in the SBSA document define the basic CPU states on -top of which ARM platforms implement power management schemes that allow an OS -PM implementation to put the processor in different idle states (which include -states listed above; "off" state is not an idle state since it does not have -wake-up capabilities, hence it is not considered in this document). - -Idle state parameters (e.g. entry latency) are platform specific and need to be -characterized with bindings that provide the required information to OS PM -code so that it can build the required tables and use them at runtime. - -The device tree binding definition for ARM idle states is the subject of this -document. - -=========================================== -2 - idle-states definitions -=========================================== - -Idle states are characterized for a specific system through a set of -timing and energy related properties, that underline the HW behaviour -triggered upon idle states entry and exit. - -The following diagram depicts the CPU execution phases and related timing -properties required to enter and exit an idle state: - -..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__.. - | | | | | - - |<------ entry ------->| - | latency | - |<- exit ->| - | latency | - |<-------- min-residency -------->| - |<------- wakeup-latency ------->| - - Diagram 1: CPU idle state execution phases - -EXEC: Normal CPU execution. - -PREP: Preparation phase before committing the hardware to idle mode - like cache flushing. This is abortable on pending wake-up - event conditions. The abort latency is assumed to be negligible - (i.e. less than the ENTRY + EXIT duration). If aborted, CPU - goes back to EXEC. This phase is optional. If not abortable, - this should be included in the ENTRY phase instead. - -ENTRY: The hardware is committed to idle mode. This period must run - to completion up to IDLE before anything else can happen. - -IDLE: This is the actual energy-saving idle period. This may last - between 0 and infinite time, until a wake-up event occurs. - -EXIT: Period during which the CPU is brought back to operational - mode (EXEC). - -entry-latency: Worst case latency required to enter the idle state. The -exit-latency may be guaranteed only after entry-latency has passed. - -min-residency: Minimum period, including preparation and entry, for a given -idle state to be worthwhile energywise. - -wakeup-latency: Maximum delay between the signaling of a wake-up event and the -CPU being able to execute normal code again. If not specified, this is assumed -to be entry-latency + exit-latency. - -These timing parameters can be used by an OS in different circumstances. - -An idle CPU requires the expected min-residency time to select the most -appropriate idle state based on the expected expiry time of the next IRQ -(i.e. wake-up) that causes the CPU to return to the EXEC phase. - -An operating system scheduler may need to compute the shortest wake-up delay -for CPUs in the system by detecting how long will it take to get a CPU out -of an idle state, e.g.: - -wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) - -In other words, the scheduler can make its scheduling decision by selecting -(e.g. waking-up) the CPU with the shortest wake-up delay. -The wake-up delay must take into account the entry latency if that period -has not expired. The abortable nature of the PREP period can be ignored -if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than -the worst case since it depends on the CPU operating conditions, i.e. caches -state). - -An OS has to reliably probe the wakeup-latency since some devices can enforce -latency constraint guarantees to work properly, so the OS has to detect the -worst case wake-up latency it can incur if a CPU is allowed to enter an -idle state, and possibly to prevent that to guarantee reliable device -functioning. - -The min-residency time parameter deserves further explanation since it is -expressed in time units but must factor in energy consumption coefficients. - -The energy consumption of a cpu when it enters a power state can be roughly -characterised by the following graph: - - | - | - | - e | - n | /--- - e | /------ - r | /------ - g | /----- - y | /------ - | ---- - | /| - | / | - | / | - | / | - | / | - | / | - |/ | - -----|-------+---------------------------------- - 0| 1 time(ms) - - Graph 1: Energy vs time example - -The graph is split in two parts delimited by time 1ms on the X-axis. -The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope -and denotes the energy costs incurred while entering and leaving the idle -state. -The graph curve in the area delimited by X-axis values = {x | x > 1ms } has -shallower slope and essentially represents the energy consumption of the idle -state. - -min-residency is defined for a given idle state as the minimum expected -residency time for a state (inclusive of preparation and entry) after -which choosing that state become the most energy efficient option. A good -way to visualise this, is by taking the same graph above and comparing some -states energy consumptions plots. - -For sake of simplicity, let's consider a system with two idle states IDLE1, -and IDLE2: - - | - | - | - | /-- IDLE1 - e | /--- - n | /---- - e | /--- - r | /-----/--------- IDLE2 - g | /-------/--------- - y | ------------ /---| - | / /---- | - | / /--- | - | / /---- | - | / /--- | - | --- | - | / | - | / | - |/ | time - ---/----------------------------+------------------------ - |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy - | - IDLE2-min-residency - - Graph 2: idle states min-residency example - -In graph 2 above, that takes into account idle states entry/exit energy -costs, it is clear that if the idle state residency time (i.e. time till next -wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state -choice energywise. - -This is mainly down to the fact that IDLE1 entry/exit energy costs are lower -than IDLE2. - -However, the lower power consumption (i.e. shallower energy curve slope) of -idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy -efficient. - -The time at which IDLE2 becomes more energy efficient than IDLE1 (and other -shallower states in a system with multiple idle states) is defined -IDLE2-min-residency and corresponds to the time when energy consumption of -IDLE1 and IDLE2 states breaks even. - -The definitions provided in this section underpin the idle states -properties specification that is the subject of the following sections. - -=========================================== -3 - idle-states node -=========================================== - -ARM processor idle states are defined within the idle-states node, which is -a direct child of the cpus node [1] and provides a container where the -processor idle states, defined as device tree nodes, are listed. - -- idle-states node - - Usage: Optional - On ARM systems, it is a container of processor idle - states nodes. If the system does not provide CPU - power management capabilities, or the processor just - supports idle_standby, an idle-states node is not - required. - - Description: idle-states node is a container node, where its - subnodes describe the CPU idle states. - - Node name must be "idle-states". - - The idle-states node's parent node must be the cpus node. - - The idle-states node's child nodes can be: - - - one or more state nodes - - Any other configuration is considered invalid. - - An idle-states node defines the following properties: - - - entry-method - Value type: <stringlist> - Usage and definition depend on ARM architecture version. - # On ARM v8 64-bit this property is required and must - be: - - "psci" - # On ARM 32-bit systems this property is optional - -This assumes that the "enable-method" property is set to "psci" in the cpu -node[6] that is responsible for setting up CPU idle management in the OS -implementation. - -The nodes describing the idle states (state) can only be defined -within the idle-states node, any other configuration is considered invalid -and therefore must be ignored. - -=========================================== -4 - state node -=========================================== - -A state node represents an idle state description and must be defined as -follows: - -- state node - - Description: must be child of the idle-states node - - The state node name shall follow standard device tree naming - rules ([5], 2.2.1 "Node names"), in particular state nodes which - are siblings within a single common parent must be given a unique name. - - The idle state entered by executing the wfi instruction (idle_standby - SBSA,[3][4]) is considered standard on all ARM platforms and therefore - must not be listed. - - With the definitions provided above, the following list represents - the valid properties for a state node: - - - compatible - Usage: Required - Value type: <stringlist> - Definition: Must be "arm,idle-state". - - - local-timer-stop - Usage: See definition - Value type: <none> - Definition: if present the CPU local timer control logic is - lost on state entry, otherwise it is retained. - - - entry-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency in - microseconds required to enter the idle state. - - - exit-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency - in microseconds required to exit the idle state. - The exit-latency-us duration may be guaranteed - only after entry-latency-us has passed. - - - min-residency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing minimum residency duration - in microseconds, inclusive of preparation and - entry, for this idle state to be considered - worthwhile energy wise (refer to section 2 of - this document for a complete description). - - - wakeup-latency-us: - Usage: Optional - Value type: <prop-encoded-array> - Definition: u32 value representing maximum delay between the - signaling of a wake-up event and the CPU being - able to execute normal code again. If omitted, - this is assumed to be equal to: - - entry-latency-us + exit-latency-us - - It is important to supply this value on systems - where the duration of PREP phase (see diagram 1, - section 2) is non-neglibigle. - In such systems entry-latency-us + exit-latency-us - will exceed wakeup-latency-us by this duration. - - - status: - Usage: Optional - Value type: <string> - Definition: A standard device tree property [5] that indicates - the operational status of an idle-state. - If present, it shall be: - "okay": to indicate that the idle state is - operational. - "disabled": to indicate that the idle state has - been disabled in firmware so it is not - operational. - If the property is not present the idle-state must - be considered operational. - - - idle-state-name: - Usage: Optional - Value type: <string> - Definition: A string used as a descriptive name for the idle - state. - - In addition to the properties listed above, a state node may require - additional properties specific to the entry-method defined in the - idle-states node. Please refer to the entry-method bindings - documentation for properties definitions. - -=========================================== -4 - Examples -=========================================== - -Example 1 (ARM 64-bit, 16-cpu system, PSCI enable-method): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU4: cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU5: cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU6: cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU7: cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; - }; - - CPU8: cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x0>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU9: cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x1>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU10: cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU11: cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU12: cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x10000>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU13: cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x10001>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU14: cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x10100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - CPU15: cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1 0x10101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; - }; - - idle-states { - entry-method = "psci"; - - CPU_RETENTION_0_0: cpu-retention-0-0 { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <20>; - exit-latency-us = <40>; - min-residency-us = <80>; - }; - - CLUSTER_RETENTION_0: cluster-retention-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <50>; - exit-latency-us = <100>; - min-residency-us = <250>; - wakeup-latency-us = <130>; - }; - - CPU_SLEEP_0_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <250>; - exit-latency-us = <500>; - min-residency-us = <950>; - }; - - CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <600>; - exit-latency-us = <1100>; - min-residency-us = <2700>; - wakeup-latency-us = <1500>; - }; - - CPU_RETENTION_1_0: cpu-retention-1-0 { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <20>; - exit-latency-us = <40>; - min-residency-us = <90>; - }; - - CLUSTER_RETENTION_1: cluster-retention-1 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <50>; - exit-latency-us = <100>; - min-residency-us = <270>; - wakeup-latency-us = <100>; - }; - - CPU_SLEEP_1_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <70>; - exit-latency-us = <100>; - min-residency-us = <300>; - wakeup-latency-us = <150>; - }; - - CLUSTER_SLEEP_1: cluster-sleep-1 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <500>; - exit-latency-us = <1200>; - min-residency-us = <3500>; - wakeup-latency-us = <1300>; - }; - }; - -}; - -Example 2 (ARM 32-bit, 8-cpu system, two clusters): - -cpus { - #size-cells = <0>; - #address-cells = <1>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; - }; - - CPU6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; - }; - - CPU7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; - }; - - idle-states { - CPU_SLEEP_0_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <200>; - exit-latency-us = <100>; - min-residency-us = <400>; - wakeup-latency-us = <250>; - }; - - CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <500>; - exit-latency-us = <1500>; - min-residency-us = <2500>; - wakeup-latency-us = <1700>; - }; - - CPU_SLEEP_1_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <300>; - exit-latency-us = <500>; - min-residency-us = <900>; - wakeup-latency-us = <600>; - }; - - CLUSTER_SLEEP_1: cluster-sleep-1 { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <800>; - exit-latency-us = <2000>; - min-residency-us = <6500>; - wakeup-latency-us = <2300>; - }; - }; - -}; - -=========================================== -5 - References -=========================================== - -[1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.yaml - -[2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.yaml - -[3] ARM Server Base System Architecture (SBSA) - http://infocenter.arm.com/help/index.jsp - -[4] ARM Architecture Reference Manuals - http://infocenter.arm.com/help/index.jsp - -[5] Devicetree Specification - https://www.devicetree.org/specifications/ - -[6] ARM Linux Kernel documentation - Booting AArch64 Linux - Documentation/arm64/booting.rst diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml new file mode 100644 index 000000000000..ea805c1e6b20 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/idle-states.yaml @@ -0,0 +1,661 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/idle-states.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM idle states binding description + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + ========================================== + 1 - Introduction + ========================================== + + ARM systems contain HW capable of managing power consumption dynamically, + where cores can be put in different low-power states (ranging from simple wfi + to power gating) according to OS PM policies. The CPU states representing the + range of dynamic idle states that a processor can enter at run-time, can be + specified through device tree bindings representing the parameters required to + enter/exit specific idle states on a given processor. + + According to the Server Base System Architecture document (SBSA, [3]), the + power states an ARM CPU can be put into are identified by the following list: + + - Running + - Idle_standby + - Idle_retention + - Sleep + - Off + + The power states described in the SBSA document define the basic CPU states on + top of which ARM platforms implement power management schemes that allow an OS + PM implementation to put the processor in different idle states (which include + states listed above; "off" state is not an idle state since it does not have + wake-up capabilities, hence it is not considered in this document). + + Idle state parameters (e.g. entry latency) are platform specific and need to + be characterized with bindings that provide the required information to OS PM + code so that it can build the required tables and use them at runtime. + + The device tree binding definition for ARM idle states is the subject of this + document. + + =========================================== + 2 - idle-states definitions + =========================================== + + Idle states are characterized for a specific system through a set of + timing and energy related properties, that underline the HW behaviour + triggered upon idle states entry and exit. + + The following diagram depicts the CPU execution phases and related timing + properties required to enter and exit an idle state: + + ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__.. + | | | | | + + |<------ entry ------->| + | latency | + |<- exit ->| + | latency | + |<-------- min-residency -------->| + |<------- wakeup-latency ------->| + + Diagram 1: CPU idle state execution phases + + EXEC: Normal CPU execution. + + PREP: Preparation phase before committing the hardware to idle mode + like cache flushing. This is abortable on pending wake-up + event conditions. The abort latency is assumed to be negligible + (i.e. less than the ENTRY + EXIT duration). If aborted, CPU + goes back to EXEC. This phase is optional. If not abortable, + this should be included in the ENTRY phase instead. + + ENTRY: The hardware is committed to idle mode. This period must run + to completion up to IDLE before anything else can happen. + + IDLE: This is the actual energy-saving idle period. This may last + between 0 and infinite time, until a wake-up event occurs. + + EXIT: Period during which the CPU is brought back to operational + mode (EXEC). + + entry-latency: Worst case latency required to enter the idle state. The + exit-latency may be guaranteed only after entry-latency has passed. + + min-residency: Minimum period, including preparation and entry, for a given + idle state to be worthwhile energywise. + + wakeup-latency: Maximum delay between the signaling of a wake-up event and the + CPU being able to execute normal code again. If not specified, this is assumed + to be entry-latency + exit-latency. + + These timing parameters can be used by an OS in different circumstances. + + An idle CPU requires the expected min-residency time to select the most + appropriate idle state based on the expected expiry time of the next IRQ + (i.e. wake-up) that causes the CPU to return to the EXEC phase. + + An operating system scheduler may need to compute the shortest wake-up delay + for CPUs in the system by detecting how long will it take to get a CPU out + of an idle state, e.g.: + + wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) + + In other words, the scheduler can make its scheduling decision by selecting + (e.g. waking-up) the CPU with the shortest wake-up delay. + The wake-up delay must take into account the entry latency if that period + has not expired. The abortable nature of the PREP period can be ignored + if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than + the worst case since it depends on the CPU operating conditions, i.e. caches + state). + + An OS has to reliably probe the wakeup-latency since some devices can enforce + latency constraint guarantees to work properly, so the OS has to detect the + worst case wake-up latency it can incur if a CPU is allowed to enter an + idle state, and possibly to prevent that to guarantee reliable device + functioning. + + The min-residency time parameter deserves further explanation since it is + expressed in time units but must factor in energy consumption coefficients. + + The energy consumption of a cpu when it enters a power state can be roughly + characterised by the following graph: + + | + | + | + e | + n | /--- + e | /------ + r | /------ + g | /----- + y | /------ + | ---- + | /| + | / | + | / | + | / | + | / | + | / | + |/ | + -----|-------+---------------------------------- + 0| 1 time(ms) + + Graph 1: Energy vs time example + + The graph is split in two parts delimited by time 1ms on the X-axis. + The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope + and denotes the energy costs incurred while entering and leaving the idle + state. + The graph curve in the area delimited by X-axis values = {x | x > 1ms } has + shallower slope and essentially represents the energy consumption of the idle + state. + + min-residency is defined for a given idle state as the minimum expected + residency time for a state (inclusive of preparation and entry) after + which choosing that state become the most energy efficient option. A good + way to visualise this, is by taking the same graph above and comparing some + states energy consumptions plots. + + For sake of simplicity, let's consider a system with two idle states IDLE1, + and IDLE2: + + | + | + | + | /-- IDLE1 + e | /--- + n | /---- + e | /--- + r | /-----/--------- IDLE2 + g | /-------/--------- + y | ------------ /---| + | / /---- | + | / /--- | + | / /---- | + | / /--- | + | --- | + | / | + | / | + |/ | time + ---/----------------------------+------------------------ + |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy + | + IDLE2-min-residency + + Graph 2: idle states min-residency example + + In graph 2 above, that takes into account idle states entry/exit energy + costs, it is clear that if the idle state residency time (i.e. time till next + wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state + choice energywise. + + This is mainly down to the fact that IDLE1 entry/exit energy costs are lower + than IDLE2. + + However, the lower power consumption (i.e. shallower energy curve slope) of + idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy + efficient. + + The time at which IDLE2 becomes more energy efficient than IDLE1 (and other + shallower states in a system with multiple idle states) is defined + IDLE2-min-residency and corresponds to the time when energy consumption of + IDLE1 and IDLE2 states breaks even. + + The definitions provided in this section underpin the idle states + properties specification that is the subject of the following sections. + + =========================================== + 3 - idle-states node + =========================================== + + ARM processor idle states are defined within the idle-states node, which is + a direct child of the cpus node [1] and provides a container where the + processor idle states, defined as device tree nodes, are listed. + + On ARM systems, it is a container of processor idle states nodes. If the + system does not provide CPU power management capabilities, or the processor + just supports idle_standby, an idle-states node is not required. + + =========================================== + 4 - References + =========================================== + + [1] ARM Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/arm/cpus.yaml + + [2] ARM Linux Kernel documentation - PSCI bindings + Documentation/devicetree/bindings/arm/psci.yaml + + [3] ARM Server Base System Architecture (SBSA) + http://infocenter.arm.com/help/index.jsp + + [4] ARM Architecture Reference Manuals + http://infocenter.arm.com/help/index.jsp + + [6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.rst + +properties: + $nodename: + const: idle-states + + entry-method: + description: | + Usage and definition depend on ARM architecture version. + + On ARM v8 64-bit this property is required. + On ARM 32-bit systems this property is optional + + This assumes that the "enable-method" property is set to "psci" in the cpu + node[6] that is responsible for setting up CPU idle management in the OS + implementation. + const: psci + +patternProperties: + "^(cpu|cluster)-": + type: object + description: | + Each state node represents an idle state description and must be defined + as follows. + + The idle state entered by executing the wfi instruction (idle_standby + SBSA,[3][4]) is considered standard on all ARM platforms and therefore + must not be listed. + + In addition to the properties listed above, a state node may require + additional properties specific to the entry-method defined in the + idle-states node. Please refer to the entry-method bindings + documentation for properties definitions. + + properties: + compatible: + const: arm,idle-state + + local-timer-stop: + description: + If present the CPU local timer control logic is + lost on state entry, otherwise it is retained. + type: boolean + + entry-latency-us: + description: + Worst case latency in microseconds required to enter the idle state. + + exit-latency-us: + description: + Worst case latency in microseconds required to exit the idle state. + The exit-latency-us duration may be guaranteed only after + entry-latency-us has passed. + + min-residency-us: + description: + Minimum residency duration in microseconds, inclusive of preparation + and entry, for this idle state to be considered worthwhile energy wise + (refer to section 2 of this document for a complete description). + + wakeup-latency-us: + description: | + Maximum delay between the signaling of a wake-up event and the CPU + being able to execute normal code again. If omitted, this is assumed + to be equal to: + + entry-latency-us + exit-latency-us + + It is important to supply this value on systems where the duration of + PREP phase (see diagram 1, section 2) is non-neglibigle. In such + systems entry-latency-us + exit-latency-us will exceed + wakeup-latency-us by this duration. + + idle-state-name: + $ref: /schemas/types.yaml#definitions/string + description: + A string used as a descriptive name for the idle state. + + required: + - compatible + - entry-latency-us + - exit-latency-us + - min-residency-us + +additionalProperties: false + +examples: + - | + + cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + idle-states { + entry-method = "psci"; + + CPU_RETENTION_0_0: cpu-retention-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + + CLUSTER_RETENTION_0: cluster-retention-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <250>; + wakeup-latency-us = <130>; + }; + + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <250>; + exit-latency-us = <500>; + min-residency-us = <950>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <600>; + exit-latency-us = <1100>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + + CPU_RETENTION_1_0: cpu-retention-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <90>; + }; + + CLUSTER_RETENTION_1: cluster-retention-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <270>; + wakeup-latency-us = <100>; + }; + + CPU_SLEEP_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <100>; + min-residency-us = <300>; + wakeup-latency-us = <150>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1200>; + min-residency-us = <3500>; + wakeup-latency-us = <1300>; + }; + }; + }; + + - | + // Example 2 (ARM 32-bit, 8-cpu system, two clusters): + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + }; + + idle-states { + cpu_sleep_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <200>; + exit-latency-us = <100>; + min-residency-us = <400>; + wakeup-latency-us = <250>; + }; + + cluster_sleep_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <500>; + exit-latency-us = <1500>; + min-residency-us = <2500>; + wakeup-latency-us = <1700>; + }; + + cpu_sleep_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <500>; + min-residency-us = <900>; + wakeup-latency-us = <600>; + }; + + cluster_sleep_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <800>; + exit-latency-us = <2000>; + min-residency-us = <6500>; + wakeup-latency-us = <2300>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt deleted file mode 100644 index 25307aa1eb9b..000000000000 --- a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt +++ /dev/null @@ -1,37 +0,0 @@ -ML-AHB interconnect bindings - -These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects -a Cortex-M subsystem with dedicated memories. -The MCU SRAM and RETRAM memory parts can be accessed through different addresses -(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the -Cortex-M firmware accesses among those ports allows to tune the system -performance. - -[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf -[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping - -Required properties: -- compatible: should be "simple-bus" -- dma-ranges: describes memory addresses translation between the local CPU and - the remote Cortex-M processor. Each memory region, is declared with - 3 parameters: - - param 1: device base address (Cortex-M processor address) - - param 2: physical base address (local CPU address) - - param 3: size of the memory region. - -The Cortex-M remote processor accessed via the mlahb interconnect is described -by a child node. - -Example: -mlahb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - dma-ranges = <0x00000000 0x38000000 0x10000>, - <0x10000000 0x10000000 0x60000>, - <0x30000000 0x30000000 0x60000>; - - m4_rproc: m4@10000000 { - ... - }; -}; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml new file mode 100644 index 000000000000..68917bb7c7e8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 ML-AHB interconnect bindings + +maintainers: + - Fabien Dessenne <fabien.dessenne@st.com> + - Arnaud Pouliquen <arnaud.pouliquen@st.com> + +description: | + These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects + a Cortex-M subsystem with dedicated memories. The MCU SRAM and RETRAM memory + parts can be accessed through different addresses (see "RAM aliases" in [1]) + using different buses (see [2]): balancing the Cortex-M firmware accesses + among those ports allows to tune the system performance. + [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf + [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping + +allOf: + - $ref: /schemas/simple-bus.yaml# + +properties: + compatible: + contains: + enum: + - st,mlahb + + dma-ranges: + description: | + Describe memory addresses translation between the local CPU and the + remote Cortex-M processor. Each memory region, is declared with + 3 parameters: + - param 1: device base address (Cortex-M processor address) + - param 2: physical base address (local CPU address) + - param 3: size of the memory region. + maxItems: 3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - '#address-cells' + - '#size-cells' + - dma-ranges + +examples: + - | + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x40000>; + ranges; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + reg = <0x10000000 0x40000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml new file mode 100644 index 000000000000..0dedf94c8578 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 Platforms System Controller bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Christophe Roullier <christophe.roullier@st.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32mp157-syscfg + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&rcc SYSCFG>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt b/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt deleted file mode 100644 index c92d411fd023..000000000000 --- a/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt +++ /dev/null @@ -1,16 +0,0 @@ -STMicroelectronics STM32 Platforms System Controller - -Properties: - - compatible : should contain two values. First value must be : - - " st,stm32mp157-syscfg " - for stm32mp157 based SoCs, - second value must be always "syscon". - - reg : offset and length of the register set. - - clocks: phandle to the syscfg clock - - Example: - syscfg: syscon@50020000 { - compatible = "st,stm32mp157-syscfg", "syscon"; - reg = <0x50020000 0x400>; - clocks = <&rcc SYSCFG>; - }; - diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml new file mode 100644 index 000000000000..9370e64992dd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun4i-a10-mbus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Memory Bus (MBUS) controller + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The MBUS controller drives the MBUS that other devices in the SoC + will use to perform DMA. It also has a register interface that + allows to monitor and control the bandwidth and priorities for + masters on that bus. + + Each device having to perform their DMA through the MBUS must have + the interconnects and interconnect-names properties set to the MBUS + controller and with "dma-mem" as the interconnect name. + +properties: + "#interconnect-cells": + const: 1 + description: + The content of the cell is the MBUS ID. + + compatible: + enum: + - allwinner,sun5i-a13-mbus + - allwinner,sun8i-h3-mbus + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + dma-ranges: + description: + See section 2.3.9 of the DeviceTree Specification. + +required: + - "#interconnect-cells" + - compatible + - reg + - clocks + - dma-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun5i-ccu.h> + + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu CLK_MBUS>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt deleted file mode 100644 index 2005bb486705..000000000000 --- a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt +++ /dev/null @@ -1,37 +0,0 @@ -Allwinner Memory Bus (MBUS) controller - -The MBUS controller drives the MBUS that other devices in the SoC will -use to perform DMA. It also has a register interface that allows to -monitor and control the bandwidth and priorities for masters on that -bus. - -Required properties: - - compatible: Must be one of: - - allwinner,sun5i-a13-mbus - - allwinner,sun8i-h3-mbus - - reg: Offset and length of the register set for the controller - - clocks: phandle to the clock driving the controller - - dma-ranges: See section 2.3.9 of the DeviceTree Specification - - #interconnect-cells: Must be one, with the argument being the MBUS - port ID - -Each device having to perform their DMA through the MBUS must have the -interconnects and interconnect-names properties set to the MBUS -controller and with "dma-mem" as the interconnect name. - -Example: - -mbus: dram-controller@1c01000 { - compatible = "allwinner,sun5i-a13-mbus"; - reg = <0x01c01000 0x1000>; - clocks = <&ccu CLK_MBUS>; - dma-ranges = <0x00000000 0x40000000 0x20000000>; - #interconnect-cells = <1>; -}; - -fe0: display-frontend@1e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - ... - interconnects = <&mbus 19>; - interconnect-names = "dma-mem"; -}; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 55c6fab1b373..77091a277642 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -9,8 +9,6 @@ PHYs. Required properties: - compatible : compatible string, one of: - - "allwinner,sun4i-a10-ahci" - - "allwinner,sun8i-r40-ahci" - "brcm,iproc-ahci" - "hisilicon,hisi-ahci" - "cavium,octeon-7130-ahci" @@ -45,8 +43,6 @@ Required properties when using sub-nodes: - #address-cells : number of cells to encode an address - #size-cells : number of cells representing the size of an address -For allwinner,sun8i-r40-ahci, the reset property must be present. - Sub-nodes required properties: - reg : the port number And at least one of the following properties: @@ -60,14 +56,6 @@ Examples: interrupts = <115>; }; - ahci: sata@1c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = <56>; - clocks = <&pll6 0>, <&ahb_gates 25>; - target-supply = <®_ahci_5v>; - }; - With sub-nodes: sata@f7e90000 { compatible = "marvell,berlin2q-achi", "generic-ahci"; diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml new file mode 100644 index 000000000000..cb530b46beff --- /dev/null +++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 AHCI SATA Controller bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun4i-a10-ahci + + reg: + maxItems: 1 + + clocks: + items: + - description: AHCI Bus Clock + - description: AHCI Module Clock + + interrupts: + maxItems: 1 + + target-supply: + description: Regulator for SATA target power + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + ahci: sata@1c18000 { + compatible = "allwinner,sun4i-a10-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <56>; + clocks = <&pll6 0>, <&ahb_gates 25>; + target-supply = <®_ahci_5v>; + }; diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml new file mode 100644 index 000000000000..e6b42a113ff1 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 AHCI SATA Controller bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun8i-r40-ahci + + reg: + maxItems: 1 + + clocks: + items: + - description: AHCI Bus Clock + - description: AHCI Module Clock + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: ahci + + ahci-supply: + description: Regulator for the AHCI controller + + phy-supply: + description: Regulator for the SATA PHY power + +required: + - compatible + - reg + - clocks + - interrupts + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-r40-ccu.h> + #include <dt-bindings/reset/sun8i-r40-ccu.h> + + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + reset-names = "ahci"; + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + }; + +... diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt deleted file mode 100644 index a0c64a29104d..000000000000 --- a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Faraday Technology FTIDE010 PATA controller - -This controller is the first Faraday IDE interface block, used in the -StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini -platform. The controller can do PIO modes 0 through 4, Multi-word DMA -(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6. - -On the Gemini platform, this PATA block is accompanied by a PATA to -SATA bridge in order to support SATA. This is why a phandle to that -controller is compulsory on that platform. - -The timing properties are unique per-SoC, not per-board. - -Required properties: -- compatible: should be one of - "cortina,gemini-pata", "faraday,ftide010" - "faraday,ftide010" -- interrupts: interrupt for the block -- reg: registers and size for the block - -Optional properties: -- clocks: a SoC clock running the peripheral. -- clock-names: should be set to "PCLK" for the peripheral clock. - -Required properties for "cortina,gemini-pata" compatible: -- sata: a phande to the Gemini PATA to SATA bridge, see - cortina,gemini-sata-bridge.txt for details. - -Example: - -ata@63000000 { - compatible = "cortina,gemini-pata", "faraday,ftide010"; - reg = <0x63000000 0x100>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - clocks = <&gcc GEMINI_CLK_GATE_IDE>; - clock-names = "PCLK"; - sata = <&sata>; -}; diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml new file mode 100644 index 000000000000..bfc6357476fd --- /dev/null +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTIDE010 PATA controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This controller is the first Faraday IDE interface block, used in the + StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini + platform. The controller can do PIO modes 0 through 4, Multi-word DMA + (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6. + + On the Gemini platform, this PATA block is accompanied by a PATA to + SATA bridge in order to support SATA. This is why a phandle to that + controller is compulsory on that platform. + + The timing properties are unique per-SoC, not per-board. + +properties: + compatible: + oneOf: + - const: faraday,ftide010 + - items: + - const: cortina,gemini-pata + - const: faraday,ftide010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + clock-names: + const: PCLK + + sata: + description: + phandle to the Gemini PATA to SATA bridge, if available + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: pata-common.yaml# + + - if: + properties: + compatible: + contains: + const: cortina,gemini-pata + + then: + required: + - sata + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + + ide@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x100>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GEMINI_CLK_GATE_IDE>; + clock-names = "PCLK"; + sata = <&sata>; + #address-cells = <1>; + #size-cells = <0>; + ide-port@0 { + reg = <0>; + }; + ide-port@1 { + reg = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml new file mode 100644 index 000000000000..fc5ebbe7108d --- /dev/null +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/pata-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Parallel AT attachment (PATA) controllers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This document defines device tree properties common to most Parallel + ATA (PATA, also known as IDE) AT attachment storage devices. + It doesn't constitue a device tree binding specification by itself but is + meant to be referenced by device tree bindings. + + The PATA (IDE) controller-specific device tree bindings are responsible for + defining whether each property is required or optional. + +properties: + $nodename: + pattern: "^ide(@.*)?$" + description: + Specifies the host controller node. PATA host controller nodes are named + "ide". + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^ide-port@[0-1]$": + description: | + DT nodes for ports connected on the PATA host. The master drive will have + ID number 0 and the slave drive will have ID number 1. The PATA port + nodes will be named "ide-port". + type: object + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The ID number of the drive port, 0 for the master port and 1 for the + slave port. + +... diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml new file mode 100644 index 000000000000..6783a4dec6b5 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/sata-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Serial AT attachment (SATA) controllers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This document defines device tree properties common to most Serial + AT attachment (SATA) storage devices. It doesn't constitute a device tree + binding specification by itself but is meant to be referenced by device + tree bindings. + + The SATA controller-specific device tree bindings are responsible for + defining whether each property is required or optional. + +properties: + $nodename: + pattern: "^sata(@.*)?$" + description: + Specifies the host controller node. SATA host controller nodes are named + "sata" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^sata-port@[0-9a-e]$": + description: | + DT nodes for ports connected on the SATA host. The SATA port + nodes will be named "sata-port". + type: object + + properties: + reg: + minimum: 0 + maximum: 14 + description: + The ID number of the drive port SATA can potentially use a port + multiplier making it possible to connect up to 15 disks to a single + SATA port. + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml new file mode 100644 index 000000000000..558db4b6ed17 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 AHB Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-ahb-clk + - allwinner,sun6i-a31-ahb1-clk + - allwinner,sun8i-h3-ahb2-clk + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-ahb-clk + + then: + properties: + clocks: + maxItems: 1 + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-ahb1-clk + + then: + properties: + clocks: + maxItems: 4 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-ahb2-clk + + then: + properties: + clocks: + maxItems: 2 + +examples: + - | + ahb@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + clock-output-names = "ahb"; + }; + + - | + ahb1@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + - | + ahb2_clk@1c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6d2>; + clock-output-names = "ahb2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml new file mode 100644 index 000000000000..b1e3d739beb2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 APB0 Bus Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-apb0-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + apb0@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml new file mode 100644 index 000000000000..51b7a6d4ea54 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 APB1 Bus Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-apb1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml new file mode 100644 index 000000000000..d801158e15de --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 AXI Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-axi-clk + - allwinner,sun8i-a23-axi-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + axi@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + - | + axi_clk@1c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml new file mode 100644 index 000000000000..0dfafba1a168 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CPU Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-cpu-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + cpu@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml new file mode 100644 index 000000000000..7484a7ab7dea --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-display-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml new file mode 100644 index 000000000000..ed1b2126a81b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Bus Gates Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the offset of + the bit controlling this particular gate in the register. + + compatible: + oneOf: + - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun4i-a10-axi-gates-clk + - const: allwinner,sun4i-a10-ahb-gates-clk + - const: allwinner,sun5i-a10s-ahb-gates-clk + - const: allwinner,sun5i-a13-ahb-gates-clk + - const: allwinner,sun7i-a20-ahb-gates-clk + - const: allwinner,sun6i-a31-ahb1-gates-clk + - const: allwinner,sun8i-a23-ahb1-gates-clk + - const: allwinner,sun9i-a80-ahb0-gates-clk + - const: allwinner,sun9i-a80-ahb1-gates-clk + - const: allwinner,sun9i-a80-ahb2-gates-clk + - const: allwinner,sun4i-a10-apb0-gates-clk + - const: allwinner,sun5i-a10s-apb0-gates-clk + - const: allwinner,sun5i-a13-apb0-gates-clk + - const: allwinner,sun7i-a20-apb0-gates-clk + - const: allwinner,sun9i-a80-apb0-gates-clk + - const: allwinner,sun8i-a83t-apb0-gates-clk + - const: allwinner,sun4i-a10-apb1-gates-clk + - const: allwinner,sun5i-a13-apb1-gates-clk + - const: allwinner,sun5i-a10s-apb1-gates-clk + - const: allwinner,sun6i-a31-apb1-gates-clk + - const: allwinner,sun7i-a20-apb1-gates-clk + - const: allwinner,sun8i-a23-apb1-gates-clk + - const: allwinner,sun9i-a80-apb1-gates-clk + - const: allwinner,sun6i-a31-apb2-gates-clk + - const: allwinner,sun8i-a23-apb2-gates-clk + - const: allwinner,sun8i-a83t-bus-gates-clk + - const: allwinner,sun9i-a80-apbs-gates-clk + - const: allwinner,sun4i-a10-dram-gates-clk + + - items: + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk + + - items: + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-indices: + minItems: 1 + maxItems: 64 + + clock-output-names: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-indices + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-indices = <0>; + clock-output-names = "axi_dram"; + }; + + - | + clk@1c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <3>, + <4>, <5>, <6>, + <7>, <8>, <9>, + <10>, <11>, <12>, + <13>, <14>, <16>, + <17>, <18>, <20>, + <21>, <22>, <23>, + <24>, <25>, <26>, + <32>, <33>, <34>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <45>, + <46>, <47>, + <50>, <52>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", + "ahb_ohci1", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", + "ahb_nand", "ahb_sdram", "ahb_ace", + "ahb_emac", "ahb_ts", "ahb_spi0", + "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", + "ahb_ve", "ahb_tvd", "ahb_tve0", + "ahb_tve1", "ahb_lcd0", "ahb_lcd1", + "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", + "ahb_de_fe0", "ahb_de_fe1", + "ahb_mp", "ahb_mali400"; + }; + + + - | + clk@1c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-indices = <0>, <1>, + <2>, <3>, + <5>, <6>, + <7>, <10>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", + "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml new file mode 100644 index 000000000000..18f131e262b4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MBUS Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun5i-a13-mbus-clk + - allwinner,sun8i-a23-mbus-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + - | + clk@1c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml new file mode 100644 index 000000000000..5199285a661a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 1 Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + There is three different outputs: the main clock, with the ID 0, + and the output and sample clocks, with the IDs 1 and 2, + respectively. + + compatible: + enum: + - allwinner,sun4i-a10-mmc-clk + - allwinner,sun9i-a80-mmc-clk + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 3 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mmc-clk + +then: + properties: + clocks: + maxItems: 3 + +else: + properties: + clocks: + maxItems: 2 + +examples: + - | + clk@1c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + - | + clk@6000410 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000410 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc0", "mmc0_output", + "mmc0_sample"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml new file mode 100644 index 000000000000..3e2abe3e67c1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 0 Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +select: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun9i-a80-mod0-clk + + # The PRCM on the A31 and A23 will have the reg property missing, + # since it's set at the upper level node, and will be validated by + # PRCM's schema. Make sure we only validate standalone nodes. + required: + - compatible + - reg + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun9i-a80-mod0-clk + + reg: + maxItems: 1 + + clocks: + # On the A80, the PRCM mod0 clocks have 2 parents. + minItems: 2 + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + - | + clk@8001454 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x08001454 0x4>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "r_ir"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml new file mode 100644 index 000000000000..7ddb55c75cff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Module 1 Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-mod1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-pll2.h> + + clk@1c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml new file mode 100644 index 000000000000..69cfa4a3d562 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-osc-clk + + reg: + maxItems: 1 + + clock-frequency: + description: > + Frequency of the main oscillator. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clock-frequency + - clock-output-names + +additionalProperties: false + +examples: + - | + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml new file mode 100644 index 000000000000..e9c4cf834aa7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CPU PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-pll1-clk + - allwinner,sun6i-a31-pll1-clk + - allwinner,sun8i-a23-pll1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "osc24M"; + }; + + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + - | + clk@1c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml new file mode 100644 index 000000000000..4b80a42fb3da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Video PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-pll3-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml new file mode 100644 index 000000000000..415bd77de53d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 DRAM PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the DRAM clock output, the second is meant + for peripherals on the SoC. + + compatible: + const: allwinner,sun4i-a10-pll5-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml new file mode 100644 index 000000000000..ec5652f76027 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Peripheral PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the SATA clock output, the second is the + regular PLL output, the third is a PLL output at twice the rate. + + compatible: + const: allwinner,sun4i-a10-pll6-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 3 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml new file mode 100644 index 000000000000..0a335c615efd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-tcon-ch0-clk + - allwinner,sun4i-a10-tcon-ch1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-tcon-ch0-clk + +then: + required: + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clk@1c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + - | + clk@1c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml new file mode 100644 index 000000000000..cd95d25bfe7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 USB Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-usb-clk + - allwinner,sun5i-a13-usb-clk + - allwinner,sun6i-a31-usb-clk + - allwinner,sun8i-a23-usb-clk + - allwinner,sun8i-h3-usb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 2 + maxItems: 8 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-usb-clk + + then: + properties: + clock-output-names: + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun5i-a13-usb-clk + + then: + properties: + clock-output-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-usb-clk + + then: + properties: + clock-output-names: + maxItems: 6 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-usb-clk + + then: + properties: + clock-output-names: + maxItems: 5 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-usb-clk + + then: + properties: + clock-output-names: + maxItems: 8 + +examples: + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", + "usb_ohci0", "usb_ohci1", + "usb_ohci2"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", + "usb_hsic_12M", "usb_ohci0"; + }; + + - | + clk@1c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", + "usb_phy2", "usb_phy3", + "usb_ohci0", "usb_ohci1", + "usb_ohci2", "usb_ohci3"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml new file mode 100644 index 000000000000..5dfd0c1c27b4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Video Engine Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + "#reset-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-ve-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c2013c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-ve-clk"; + reg = <0x01c2013c 0x4>; + clocks = <&pll4>; + clock-output-names = "ve"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml new file mode 100644 index 000000000000..99add7991c48 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A13 AHB Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun5i-a13-ahb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + ahb@1c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>, <&cpu>, <&pll6 1>; + clock-output-names = "ahb"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml new file mode 100644 index 000000000000..5f377205af71 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Peripheral PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The first output is the regular PLL output, the second is a PLL + output at twice the rate. + + compatible: + const: allwinner,sun6i-a31-pll6-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml new file mode 100644 index 000000000000..59e5dce1b65a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 GMAC TX Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun7i-a20-gmac-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + description: > + The parent clocks shall be fixed rate dummy clocks at 25 MHz and + 125 MHz, respectively. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20164 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c20164 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml new file mode 100644 index 000000000000..c745733bcf04 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 Output Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun7i-a20-out-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml new file mode 100644 index 000000000000..3eb2bf65b230 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Bus Gates Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the offset of + the bit controlling this particular gate in the register. + + compatible: + const: allwinner,sun8i-h3-bus-gates-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-indices: + minItems: 1 + maxItems: 64 + + clock-output-names: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-indices + - clock-names + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-h3-bus-gates-clk"; + reg = <0x01c20060 0x14>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <5>, <6>, <8>, + <9>, <10>, <13>, + <14>, <17>, <18>, + <19>, <20>, + <21>, <23>, + <24>, <25>, + <26>, <27>, + <28>, <29>, + <30>, <31>, <32>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <52>, <53>, + <54>, <64>, + <65>, <69>, <72>, + <76>, <77>, <78>, + <96>, <97>, <98>, + <112>, <113>, + <114>, <115>, + <116>, <128>, <135>; + clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", + "bus_mmc1", "bus_mmc2", "bus_nand", + "bus_sdram", "bus_gmac", "bus_ts", + "bus_hstimer", "bus_spi0", + "bus_spi1", "bus_otg", + "bus_otg_ehci0", "bus_ehci1", + "bus_ehci2", "bus_ehci3", + "bus_otg_ohci0", "bus_ohci1", + "bus_ohci2", "bus_ohci3", "bus_ve", + "bus_lcd0", "bus_lcd1", "bus_deint", + "bus_csi", "bus_tve", "bus_hdmi", + "bus_de", "bus_gpu", "bus_msgbox", + "bus_spinlock", "bus_codec", + "bus_spdif", "bus_pio", "bus_ths", + "bus_i2s0", "bus_i2s1", "bus_i2s2", + "bus_i2c0", "bus_i2c1", "bus_i2c2", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_scr", "bus_ephy", "bus_dbg"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml new file mode 100644 index 000000000000..d178da90aaec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 AHB Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-ahb-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@6000060 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000060 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb0"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml new file mode 100644 index 000000000000..0351c79bd221 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 APB0 Bus Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - allwinner,sun9i-a80-apb0-clk + - allwinner,sun9i-a80-apb1-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@6000070 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb0-clk"; + reg = <0x06000070 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb0"; + }; + + - | + clk@6000074 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb1-clk"; + reg = <0x06000074 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml new file mode 100644 index 000000000000..24d5b2f1a314 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 CPUS Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-cpus-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@8001410 { + compatible = "allwinner,sun9i-a80-cpus-clk"; + reg = <0x08001410 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clock-output-names = "cpus"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml new file mode 100644 index 000000000000..07f38def7dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 GT Bus Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-gt-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming order. + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@0600005c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x0600005c 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "gt"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml new file mode 100644 index 000000000000..20dc115fa211 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 MMC Configuration Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +description: > + There is one clock/reset output per mmc controller. The number of + outputs is determined by the size of the address block, which is + related to the overall mmc block. + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-mmc-config-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-output-names: + maxItems: 4 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@1c13000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-config-clk"; + reg = <0x01c13000 0x10>; + clocks = <&ahb0_gates 8>; + resets = <&ahb0_resets 8>; + clock-output-names = "mmc0_config", "mmc1_config", + "mmc2_config", "mmc3_config"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml new file mode 100644 index 000000000000..b76bab6a30e9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Peripheral PLL Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-pll4-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@600000c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600000c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml new file mode 100644 index 000000000000..15218d10e78e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB Module Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-usb-mod-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 6 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@a08000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-mod-clk"; + reg = <0x00a08000 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb0_ahb", "usb_ohci0", + "usb1_ahb", "usb_ohci1", + "usb2_ahb", "usb_ohci2"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml new file mode 100644 index 000000000000..2569041684e6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB PHY Clock Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + "#clock-cells": + const: 1 + description: > + The additional ID argument passed to the clock shall refer to + the index of the output. + + "#reset-cells": + const: 1 + + compatible: + const: allwinner,sun9i-a80-usb-phy-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 6 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + clk@a08004 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-phy-clk"; + reg = <0x00a08004 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb_phy0", "usb_hsic1_480M", + "usb_phy1", "usb_hsic2_480M", + "usb_phy2", "usb_hsic_12M"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt deleted file mode 100644 index fb9495ea582c..000000000000 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt +++ /dev/null @@ -1,60 +0,0 @@ -STMicroelectronics STM32 Peripheral Reset Clock Controller -========================================================== - -The RCC IP is both a reset and a clock controller. - -RCC makes also power management (resume/supend and wakeup interrupt). - -Please also refer to reset.txt for common reset controller binding usage. - -Please also refer to clock-bindings.txt for common clock controller -binding usage. - - -Required properties: -- compatible: "st,stm32mp1-rcc", "syscon" -- reg: should be register base and length as documented in the datasheet -- #clock-cells: 1, device nodes should specify the clock in their - "clocks" property, containing a phandle to the clock device node, - an index specifying the clock to use. -- #reset-cells: Shall be 1 -- interrupts: Should contain a general interrupt line and a interrupt line - to the wake-up of processor (CSTOP). - -Example: - rcc: rcc@50000000 { - compatible = "st,stm32mp1-rcc", "syscon"; - reg = <0x50000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>, - <GIC_SPI 145 IRQ_TYPE_NONE>; - }; - -Specifying clocks -================= - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/stm32mp1-clks.h header and can be used in device -tree sources. - -Specifying softreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the reset device node and an index specifying -which channel to use. -The index is the bit number within the RCC registers bank, starting from RCC -base address. -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register. - -For example on STM32MP1, for LTDC reset: - ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset - = 0x180 / 4 * 32 + 0 = 3072 - -The list of valid indices for STM32MP1 is available in: -include/dt-bindings/reset-controller/stm32mp1-resets.h - -This file implements defines like: -#define LTDC_R 3072 diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml new file mode 100644 index 000000000000..b8f91e444d2f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/clock/st,stm32mp1-rcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reset Clock Controller Binding + +maintainers: + - Gabriel Fernandez <gabriel.fernandez@st.com> + +description: | + The RCC IP is both a reset and a clock controller. + RCC makes also power management (resume/supend and wakeup interrupt). + Please also refer to reset.txt for common reset controller binding usage. + + This binding uses common clock bindings + Documentation/devicetree/bindings/clock/clock-bindings.txt + + Specifying clocks + ================= + + All available clocks are defined as preprocessor macros in + dt-bindings/clock/stm32mp1-clks.h header and can be used in device + tree sources. + + Specifying softreset control of devices + ======================================= + + Device nodes should specify the reset channel required in their "resets" + property, containing a phandle to the reset device node and an index specifying + which channel to use. + The index is the bit number within the RCC registers bank, starting from RCC + base address. + It is calculated as: index = register_offset / 4 * 32 + bit_offset. + Where bit_offset is the bit offset within the register. + + For example on STM32MP1, for LTDC reset: + ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset + = 0x180 / 4 * 32 + 0 = 3072 + + The list of valid indices for STM32MP1 is available in: + include/dt-bindings/reset-controller/stm32mp1-resets.h + + This file implements defines like: + #define LTDC_R 3072 + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + items: + - const: st,stm32mp1-rcc + - const: syscon + + reg: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt deleted file mode 100644 index 1a042e20b115..000000000000 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ /dev/null @@ -1,225 +0,0 @@ -Device Tree Clock bindings for arch-sunxi - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "allwinner,sun4i-a10-osc-clk" - for a gatable oscillator - "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 - "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23 - "allwinner,sun4i-a10-pll3-clk" - for the video PLL clock on A10 - "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80 - "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock - "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock - "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 - "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80 - "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-a10-axi-clk" - for the AXI clock - "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 - "allwinner,sun4i-a10-gates-clk" - for generic gates on all compatible SoCs - "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates - "allwinner,sun4i-a10-ahb-clk" - for the AHB clock - "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 - "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 - "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 - "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 - "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s - "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 - "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 - "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80 - "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31 - "allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3 - "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 - "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23 - "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80 - "allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80 - "allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80 - "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock - "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 - "allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23 - "allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80 - "allwinner,sun8i-a83t-apb0-gates-clk" - for the APB0 gates on A83T - "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 - "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 - "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s - "allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31 - "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 - "allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23 - "allwinner,sun8i-h3-apb0-gates-clk" - for the APB0 gates on H3 - "allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80 - "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock - "allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80 - "allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10 - "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13 - "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s - "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31 - "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 - "allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23 - "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80 - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 - "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 - "allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T - "allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3 - "allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80 - "allwinner,sun4i-a10-display-clk" - for the display clocks on the A10 - "allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10 - "allwinner,sun5i-a13-dram-gates-clk" - for the DRAM gates on A13 - "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 - "allwinner,sun4i-a10-mmc-clk" - for the MMC clock - "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 - "allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80 - "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks - "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80 - "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 - "allwinner,sun7i-a20-out-clk" - for the external output clocks - "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 - "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10 - "allwinner,sun4i-a10-tcon-ch1-clk" - for the TCON channel 1 clock on the A10 - "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 - "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 - "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 - "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23 - "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3 - "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 - "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 - "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock - "allwinner,sun6i-a31-display-clk" - for the display clocks - -Required properties for all clocks: -- reg : shall be the control register address for the clock. -- clocks : shall be the input parent clock(s) phandle for the clock. For - multiplexed clocks, the list order must match the hardware - programming order. -- #clock-cells : from common clock binding; shall be set to 0 except for - the following compatibles where it shall be set to 1: - "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", - "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk", - "allwinner,*-usb-clk", "allwinner,*-mmc-clk", - "allwinner,*-mmc-config-clk" -- clock-output-names : shall be the corresponding names of the outputs. - If the clock module only has one output, the name shall be the - module name. - -And "allwinner,*-usb-clk" clocks also require: -- reset-cells : shall be set to 1 - -The "allwinner,sun4i-a10-ve-clk" clock also requires: -- reset-cells : shall be set to 0 - -The "allwinner,sun9i-a80-mmc-config-clk" clock also requires: -- #reset-cells : shall be set to 1 -- resets : shall be the reset control phandle for the mmc block. - -For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate -dummy clocks at 25 MHz and 125 MHz, respectively. See example. - -Clock consumers should specify the desired clocks they use with a -"clocks" phandle cell. Consumers that are using a gated clock should -provide an additional ID in their clock property. This ID is the -offset of the bit controlling this particular gate in the register. -For the other clocks with "#clock-cells" = 1, the additional ID shall -refer to the index of the output. - -For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output -is the normal PLL6 output, or "pll6". The second output is rate doubled -PLL6, or "pll6x2". - -The "allwinner,*-mmc-clk" clocks have three different outputs: the -main clock, with the ID 0, and the output and sample clocks, with the -IDs 1 and 2, respectively. - -The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output -per mmc controller. The number of outputs is determined by the size of -the address block, which is related to the overall mmc block. - -For example: - -osc24M: clk@1c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc24M_fixed>; - clock-output-names = "osc24M"; -}; - -pll1: clk@1c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; -}; - -pll5: clk@1c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; -}; - -pll6: clk@1c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; -}; - -cpu: cpu@1c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>; - clock-output-names = "cpu"; -}; - -mmc0_clk: clk@1c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", "mmc0_output", "mmc0_sample"; -}; - -mii_phy_tx_clk: clk@2 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "mii_phy_tx"; -}; - -gmac_int_tx_clk: clk@3 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_int_tx"; -}; - -gmac_clk: clk@1c20164 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-gmac-clk"; - reg = <0x01c20164 0x4>; - /* - * The first clock must be fixed at 25MHz; - * the second clock must be fixed at 125MHz - */ - clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; - clock-output-names = "gmac"; -}; - -mmc_config_clk: clk@1c13000 { - compatible = "allwinner,sun9i-a80-mmc-config-clk"; - reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; - clock-names = "ahb"; - resets = <&ahb0_resets 8>; - reset-names = "ahb"; - #clock-cells = <1>; - #reset-cells = <1>; - clock-output-names = "mmc0_config", "mmc1_config", - "mmc2_config", "mmc3_config"; -}; diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml new file mode 100644 index 000000000000..86057d541065 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Backend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine backend exposes layers and sprites to the system. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-backend + - allwinner,sun5i-a13-display-backend + - allwinner,sun6i-a31-display-backend + - allwinner,sun7i-a20-display-backend + - allwinner,sun8i-a23-display-backend + - allwinner,sun8i-a33-display-backend + - allwinner,sun9i-a80-display-backend + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Display Backend registers + - description: SAT registers + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + items: + - description: The backend interface clock + - description: The backend module clock + - description: The backend DRAM clock + - description: The SAT clock + + clock-names: + minItems: 3 + maxItems: 4 + items: + - const: ahb + - const: mod + - const: ram + - const: sat + + resets: + minItems: 1 + maxItems: 2 + items: + - description: The Backend reset line + - description: The SAT reset line + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun8i-a33-display-backend + +then: + properties: + reg: + minItems: 2 + + reg-names: + minItems: 2 + + clocks: + minItems: 4 + + clock-names: + minItems: 4 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + required: + - reg-names + - reset-names + +else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + +examples: + - | + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_DE_BE0 42 + #define CLK_DRAM_DE_BE0 140 + #define CLK_DE_BE0 144 + #define RST_DE_BE0 5 + + display-backend@1e60000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a23-a33-ccu.h and + * reset/sun8i-a23-a33-ccu.h headers, but we can't include them + * since it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_DE_BE 40 + #define CLK_BUS_SAT 46 + #define CLK_DRAM_DE_BE 84 + #define CLK_DE_BE 85 + #define RST_BUS_DE_BE 21 + #define RST_BUS_SAT 27 + + display-backend@1e60000 { + compatible = "allwinner,sun8i-a33-display-backend"; + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml new file mode 100644 index 000000000000..944ff2f1cf93 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Pipeline Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine pipeline (and its entry point, since it can be + either directly the backend or the frontend) is represented as an + extra node. + + The Allwinner A10 Display pipeline is composed of several components + that are going to be documented below: + + For all connections between components up to the TCONs in the + display pipeline, when there are multiple components of the same + type at the same depth, the local endpoint ID must be the same as + the remote component's index. For example, if the remote endpoint is + Frontend 1, then the local endpoint ID must be 1. + + Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 + [1] -- -- [1] [1] -- -- [1] + \ / \ / + X X + / \ / \ + [0] -- -- [0] [0] -- -- [0] + Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 + + For a two pipeline system such as the one depicted above, the lines + represent the connections between the components, while the numbers + within the square brackets corresponds to the ID of the local endpoint. + + The same rule also applies to DE 2.0 mixer-TCON connections: + + Mixer 0 [0] ----------- [0] TCON 0 + [1] ---- ---- [1] + \ / + X + / \ + [0] ---- ---- [0] + Mixer 1 [1] ----------- [1] TCON 1 + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun5i-a10s-display-engine + - allwinner,sun5i-a13-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a23-display-engine + - allwinner,sun8i-a33-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-h3-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun8i-v3s-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + - allwinner,sun50i-h6-display-engine + + allwinner,pipelines: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - minItems: 1 + maxItems: 2 + description: | + Available display engine frontends (DE 1.0) or mixers (DE + 2.0/3.0) available. + +required: + - compatible + - allwinner,pipelines + +additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + +then: + properties: + allwinner,pipelines: + minItems: 2 + +else: + properties: + allwinner,pipelines: + maxItems: 1 + +examples: + - | + de: display-engine { + compatible = "allwinner,sun4i-a10-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml new file mode 100644 index 000000000000..3eb1c2bbf4e7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Frontend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine frontend does formats conversion, scaling, + deinterlacing and color space conversion. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-frontend + - allwinner,sun5i-a13-display-frontend + - allwinner,sun6i-a31-display-frontend + - allwinner,sun7i-a20-display-frontend + - allwinner,sun8i-a23-display-frontend + - allwinner,sun8i-a33-display-frontend + - allwinner,sun9i-a80-display-frontend + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The frontend interface clock + - description: The frontend module clock + - description: The frontend DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml new file mode 100644 index 000000000000..5d4915aed1e2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 HDMI Controller Device Tree Bindings + +description: | + The HDMI Encoder supports the HDMI video and audio outputs, and does + CEC. It is one end of the pipeline. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-hdmi + - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun6i-a31-hdmi + - items: + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + oneOf: + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL + + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL + + clock-names: + oneOf: + - items: + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 + + - items: + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + dmas: + items: + - description: DDC Transmission DMA Channel + - description: DDC Reception DMA Channel + - description: Audio Transmission DMA Channel + + dma-names: + items: + - const: ddc-tx + - const: ddc-rx + - const: audio-tx + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-hdmi + +then: + properties: + clocks: + minItems: 5 + + clock-names: + minItems: 5 + + required: + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/dma/sun4i-a10.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun4i-a10-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml new file mode 100644 index 000000000000..86ad617d2327 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -0,0 +1,676 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The TCON acts as a timing controller for RGB, LVDS and TV + interfaces. + +properties: + "#clock-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-tcon + - const: allwinner,sun5i-a13-tcon + - const: allwinner,sun6i-a31-tcon + - const: allwinner,sun6i-a31s-tcon + - const: allwinner,sun7i-a20-tcon + - const: allwinner,sun8i-a23-tcon + - const: allwinner,sun8i-a33-tcon + - const: allwinner,sun8i-a83t-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + - const: allwinner,sun8i-v3s-tcon + - const: allwinner,sun9i-a80-tcon-lcd + - const: allwinner,sun9i-a80-tcon-tv + + - items: + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd + + - items: + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + clock-output-names: + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - maxItems: 1 + description: + Name of the LCD pixel clock created. + + dmas: + maxItems: 1 + + resets: + anyOf: + - items: + - description: TCON Reset Line + + - items: + - description: TCON Reset Line + - description: TCON LVDS Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line + + reset-names: + oneOf: + - const: lcd + + - items: + - const: lcd + - const: lvds + + - items: + - const: lcd + - const: edp + + - items: + - const: lcd + - const: edp + - const: lvds + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + patternProperties: + "^endpoint(@[0-9])$": + type: object + + properties: + allwinner,tcon-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TCON can have 1 or 2 channels, usually with the + first channel being used for the panels interfaces + (RGB, LVDS, etc.), and the second being used for the + outputs that require another controller (TV Encoder, + HDMI, etc.). + + If that property is present, specifies the TCON + channel the endpoint is associated to. If that + property is not present, the endpoint number will be + used as the channel number. + + unevaluatedProperties: true + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun7i-a20-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + + then: + properties: + clocks: + minItems: 4 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-tv + - allwinner,sun8i-r40-tcon-tv + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun4i-a10-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + required: + - "#clock-cells" + - clock-output-names + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + resets: + minItems: 3 + + reset-names: + items: + - const: lcd + - const: edp + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: edp + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + required: + - dmas + +examples: + - | + #include <dt-bindings/dma/sun4i-a10.h> + + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_LCD0 56 + #define CLK_TCON0_CH0 149 + #define CLK_TCON0_CH1 155 + #define RST_TCON0 11 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_AHB_LCD0 + #undef CLK_TCON0_CH0 + #undef CLK_TCON0_CH1 + #undef RST_TCON0 + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun6i-a31-ccu.h and + * reset/sun6i-a31-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_PLL_MIPI 15 + #define CLK_AHB1_LCD0 47 + #define CLK_LCD0_CH0 127 + #define CLK_LCD0_CH1 129 + #define RST_AHB1_LCD0 27 + #define RST_AHB1_LVDS 41 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>, + <&ccu CLK_PLL_MIPI>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1", + "lvds-alt"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_PLL_MIPI + #undef CLK_AHB1_LCD0 + #undef CLK_LCD0_CH0 + #undef CLK_LCD0_CH1 + #undef RST_AHB1_LCD0 + #undef RST_AHB1_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun9i-a80-ccu.h and + * reset/sun9i-a80-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_LCD0 102 + #define CLK_LCD0 58 + #define RST_BUS_LCD0 22 + #define RST_BUS_EDP 24 + #define RST_BUS_LVDS 25 + + lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "edp", "lvds"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_EDP + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON0 36 + #define CLK_TCON0 85 + #define RST_BUS_TCON0 22 + #define RST_BUS_LVDS 31 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-r40-ccu.h and + * reset/sun8i-r40-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON_TV0 73 + #define RST_BUS_TCON_TV0 49 + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + #undef CLK_BUS_TCON_TV0 + #undef RST_BUS_TCON_TV0 + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml new file mode 100644 index 000000000000..5d5d39665119 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 TV Encoder Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun4i-a10-tv-encoder + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint, usually coming from the + associated TCON. + +required: + - compatible + - reg + - clocks + - resets + - port + +additionalProperties: false + +examples: + - | + tve0: tv-encoder@1c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml new file mode 100644 index 000000000000..0c1ce55940e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Dynamic Range Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DRC (Dynamic Range Controller) allows to dynamically adjust + pixel brightness/contrast based on histogram measurements for LCD + content adaptive backlight control. + +properties: + compatible: + enum: + - allwinner,sun6i-a31-drc + - allwinner,sun6i-a31s-drc + - allwinner,sun8i-a23-drc + - allwinner,sun8i-a33-drc + - allwinner,sun9i-a80-drc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DRC interface clock + - description: The DRC module clock + - description: The DRC DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun6i-a31-ccu.h> + #include <dt-bindings/reset/sun6i-a31-ccu.h> + + drc0: drc@1e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 0f7074977c04..9e90c2b00960 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -15,7 +15,9 @@ properties: "#size-cells": true compatible: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi reg: maxItems: 1 @@ -24,6 +26,8 @@ properties: maxItems: 1 clocks: + minItems: 1 + maxItems: 2 items: - description: Bus Clock - description: Module Clock @@ -63,13 +67,38 @@ required: - reg - interrupts - clocks - - clock-names - phys - phy-names - resets - vcc-dsi-supply - port +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + required: + - clock-names + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi + + then: + properties: + clocks: + minItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml new file mode 100644 index 000000000000..1dee641e3ea1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun8i-a83t-de2-mixer-0 + - allwinner,sun8i-a83t-de2-mixer-1 + - allwinner,sun8i-h3-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-1 + - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun50i-a64-de2-mixer-0 + - allwinner,sun50i-a64-de2-mixer-1 + - allwinner,sun50i-h6-de3-mixer-0 + + reg: + maxItems: 1 + + clocks: + items: + - description: The mixer interface clock + - description: The mixer module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/reset/sun8i-de2.h> + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-a83t-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml new file mode 100644 index 000000000000..4d6795690ac3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller + IP with Allwinner\'s own PHY IP. It supports audio and video outputs + and CEC. + + These DT bindings follow the Synopsys DWC HDMI TX bindings defined + in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with + the following device-specific properties. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun8i-a83t-dw-hdmi + - const: allwinner,sun50i-h6-dw-hdmi + + - items: + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi + + reg: + maxItems: 1 + + reg-io-width: + const: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Bus Clock + - description: Register Clock + - description: TMDS Clock + - description: HDMI CEC Clock + - description: HDCP Clock + - description: HDCP Bus Clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: iahb + - const: isfr + - const: tmds + - const: cec + - const: hdcp + - const: hdcp-bus + + resets: + minItems: 1 + maxItems: 2 + items: + - description: HDMI Controller Reset + - description: HDCP Reset + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: ctrl + - const: hdcp + + phys: + maxItems: 1 + description: + Phandle to the DWC HDMI PHY. + + phy-names: + const: phy + + hvcc-supply: + description: + The VCC power supply of the controller + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. Usually the associated + TCON. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - reg-io-width + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-h6-dw-hdmi + +then: + properties: + clocks: + minItems: 6 + + clock-names: + minItems: 6 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 39 + #define CLK_HDMI 93 + #define CLK_HDMI_SLOW 94 + #define RST_BUS_HDMI1 26 + + hdmi@1ee0000 { + compatible = "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + /* Cleanup after ourselves */ + #undef CLK_BUS_HDMI + #undef CLK_HDMI + #undef CLK_HDMI_SLOW + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun50i-h6-ccu.h and + * reset/sun50i-h6-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 126 + #define CLK_BUS_HDCP 137 + #define CLK_HDMI 123 + #define CLK_HDMI_SLOW 124 + #define CLK_HDMI_CEC 125 + #define CLK_HDCP 136 + #define RST_BUS_HDMI_SUB 57 + #define RST_BUS_HDCP 62 + + hdmi@6000000 { + compatible = "allwinner,sun50i-h6-dw-hdmi"; + reg = <0x06000000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, + <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; + clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", + "hdcp-bus"; + resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; + reset-names = "ctrl", "hdcp"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml new file mode 100644 index 000000000000..501cec16168c --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t HDMI PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - allwinner,sun8i-a83t-hdmi-phy + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun8i-r40-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + - allwinner,sun50i-h6-hdmi-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Parent of the PHY clock + - description: Second possible parent of the PHY clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: bus + - const: mod + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + reset-names: + const: phy + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-hdmi-phy + +then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +else: + if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + + then: + properties: + clocks: + minItems: 3 + + clock-names: + minItems: 3 + + else: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-a83t-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml new file mode 100644 index 000000000000..b98ca609824b --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 TCON TOP Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + TCON TOPs main purpose is to configure whole display pipeline. It + determines relationships between mixers and TCONs, selects source + TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV + encoder clock source and contains additional TV TCON and DSI gates. + + It allows display pipeline to be configured in very different ways: + + / LCD0/LVDS0 + / [0] TCON-LCD0 + | \ MIPI DSI + mixer0 | + \ / [1] TCON-LCD1 - LCD1/LVDS1 + TCON-TOP + / \ [2] TCON-TV0 [0] - TVE0/RGB + mixer1 | \ + | TCON-TOP - HDMI + | / + \ [3] TCON-TV1 [1] - TVE1/RGB + + Note that both TCON TOP references same physical unit. Both mixers + can be connected to any TCON. Not all TCON TOP variants support all + features. + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - allwinner,sun8i-r40-tcon-top + - allwinner,sun50i-h6-tcon-top + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 6 + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + minItems: 2 + maxItems: 6 + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + minItems: 1 + maxItems: 3 + description: > + The first item is the name of the clock created for the TV0 + channel, the second item is the name of the TCON TV1 channel + clock and the third one is the name of the DSI channel clock. + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + All ports should have only one endpoint connected to + remote endpoint. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoint for Mixer 0 mux. + + port@1: + type: object + description: | + Output endpoint for Mixer 0 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@2: + type: object + description: | + Input endpoint for Mixer 1 mux. + + port@3: + type: object + description: | + Output endpoint for Mixer 1 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@4: + type: object + description: | + Input endpoint for HDMI mux. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@5: + type: object + description: | + Output endpoint for HDMI mux + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + - port@4 + - port@5 + + additionalProperties: false + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + +then: + properties: + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + +else: + properties: + clocks: + minItems: 6 + + clock-output-names: + minItems: 3 + + ports: + required: + - port@2 + - port@3 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun8i-r40-ccu.h> + #include <dt-bindings/reset/sun8i-r40-ccu.h> + + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml new file mode 100644 index 000000000000..96de41d32b3e --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC, + can sharpen the display content in both luma and chroma channels. + +properties: + compatible: + const: allwinner,sun9i-a80-deu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DEU interface clock + - description: The DEU module clock + - description: The DEU DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun9i-a80-de.h> + #include <dt-bindings/reset/sun9i-a80-de.h> + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + reg = <0>; + + deu0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml new file mode 100644 index 000000000000..8f373029f5d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent LVDS encoders and decoders + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding supports transparent LVDS encoders and decoders that don't + require any configuration. + + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This binding targets devices compatible with the following + specifications only. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Those devices have been marketed under the FPD-Link and FlatLink brand names + among others. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback + - items: + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + + ports: + type: object + description: | + This device has two video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: | + For LVDS encoders, port 0 is the parallel input + For LVDS decoders, port 0 is the LVDS input + + port@1: + type: object + description: | + For LVDS encoders, port 1 is the LVDS output + For LVDS decoders, port 1 is the parallel output + + required: + - port@0 + - port@1 + + powerdown-gpios: + description: + The GPIO used to control the power down line of this device. + maxItems: 1 + +required: + - compatible + - ports + +examples: + - | + lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + + - | + lvds-decoder { + compatible = "ti,ds90cf384a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt deleted file mode 100644 index 60091db5dfa5..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt +++ /dev/null @@ -1,66 +0,0 @@ -Parallel to LVDS Encoder ------------------------- - -This binding supports the parallel to LVDS encoders that don't require any -configuration. - -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple -incompatible data link layers have been used over time to transmit image data -to LVDS panels. This binding targets devices compatible with the following -specifications only. - -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National -Semiconductor -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video -Electronics Standards Association (VESA) - -Those devices have been marketed under the FPD-Link and FlatLink brand names -among others. - - -Required properties: - -- compatible: Must be "lvds-encoder" - - Any encoder compatible with this generic binding, but with additional - properties not listed here, must list a device specific compatible first - followed by this generic compatible. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "lvds-encoder"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&display_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt deleted file mode 100644 index fee3c88e1a17..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt +++ /dev/null @@ -1,50 +0,0 @@ -THine Electronics THC63LVDM83D LVDS serializer ----------------------------------------------- - -The THC63LVDM83D is an LVDS serializer designed to support pixel data -transmission between a host and a flat panel. - -Required properties: - -- compatible: Should be "thine,thc63lvdm83d" - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). - -Required nodes: - -The THC63LVDM83D has two video ports. Their connections are modeled using the -OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for CMOS/TTL input -- Video port 1 for LVDS output - - -Example -------- - - lvds_enc: encoder@0 { - compatible = "thine,thc63lvdm83d"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint@0 { - remote-endpoint = <&rgb_out>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt deleted file mode 100644 index e575f996959a..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt +++ /dev/null @@ -1,55 +0,0 @@ -Texas Instruments FPD-Link (LVDS) Serializer --------------------------------------------- - -The DS90C185 and DS90C187 are low-power serializers for portable -battery-powered applications that reduces the size of the RGB -interface between the host GPU and the display. - -Required properties: - -- compatible: Should be - "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer - "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) - -Required nodes: - -The devices have two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "ti,ds90c185", "lvds-encoder"; - - powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&lcdc_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml new file mode 100644 index 000000000000..fd986c36c737 --- /dev/null +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/dsi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for DSI Display Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This document defines device tree properties common to DSI, Display + Serial Interface controllers and attached panels. It doesn't constitute + a device tree binding specification by itself but is meant to be referenced + by device tree bindings. + + When referenced from panel device tree bindings the properties defined in + this document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + + Notice: this binding concerns DSI panels connected directly to a master + without any intermediate port graph to the panel. Each DSI master + can control one to four virtual channels to one panel. Each virtual + channel should have a node "panel" for their virtual channel with their + reg-property set to the virtual channel number, usually there is just + one virtual channel, number 0. + +properties: + $nodename: + pattern: "^dsi-controller(@.*)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^panel@[0-3]$": + description: Panels connected to the DSI link + type: object + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The virtual channel number of a DSI peripheral. Must be in the range + from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI + peripherals respond to more than a single virtual channel. In that + case the reg property can take multiple entries, one for each virtual + channel that the peripheral responds to. + + clock-master: + type: boolean + description: + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. + + enforce-video-mode: + type: boolean + description: + The best option is usually to run a panel in command mode, as this + gives better control over the panel hardware. However for different + reasons like broken hardware, missing features or testing, it may be + useful to be able to force a command mode-capable panel into video + mode. + + required: + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi-controller@a0351000 { + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt index 7b536c8c6dde..01e3261defb6 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.txt @@ -4,6 +4,7 @@ Required properties: - compatible: one of: * ingenic,jz4740-lcd * ingenic,jz4725b-lcd + * ingenic,jz4770-lcd - reg: LCD registers location and length - clocks: LCD pixclock and device clock specifiers. The device clock is only required on the JZ4740. diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index a61dd40f3792..551ae26f60da 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC. MDSS: Required properties: -- compatible: "qcom,sdm845-mdss" +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" - reg: physical base address and length of contoller's registers. - reg-names: register region names. The following region is required: * "mdss" @@ -41,7 +41,7 @@ Optional properties: MDP: Required properties: -- compatible: "qcom,sdm845-dpu" +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" - reg: physical base address and length of controller's registers. - reg-names : register region names. The following region is required: * "mdp" diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 2b8fd26c43b0..7edc298a15f2 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -23,13 +23,18 @@ Required properties: - iommus: optional phandle to an adreno iommu instance - operating-points-v2: optional phandle to the OPP operating points - interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. + ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms + will have two paths; all others will have one path. +- interconnect-names: The names of the interconnect paths that correspond to the + interconnects property. Values must be gfx-mem and ocmem. - qcom,gmu: For GMU attached devices a phandle to the GMU device that will control the power for the GPU. Applicable targets: - qcom,adreno-630.2 - zap-shader: For a5xx and a6xx devices this node contains a memory-region that points to reserved memory to store the zap shader that can be used to help bring the GPU out of secure mode. +- firmware-name: optional property of the 'zap-shader' node, listing the + relative path of the device specific zap firmware. Example 3xx/4xx/a5xx: @@ -76,11 +81,13 @@ Example a6xx (with GMU): operating-points-v2 = <&gpu_opp_table>; interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; qcom,gmu = <&gmu>; zap-shader { memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" }; }; }; diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml deleted file mode 100644 index c6e33e7f36d0..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/panel/ampire,am-480272h3tmqw-t01h.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - -maintainers: - - Yannick Fertre <yannick.fertre@st.com> - - Thierry Reding <treding@nvidia.com> - -allOf: - - $ref: panel-common.yaml# - -properties: - compatible: - const: ampire,am-480272h3tmqw-t01h - - power-supply: true - enable-gpios: true - backlight: true - port: true - -required: - - compatible - -additionalProperties: false - -examples: - - | - panel_rgb: panel { - compatible = "ampire,am-480272h3tmqw-t01h"; - enable-gpios = <&gpioa 8 1>; - port { - panel_in_rgb: endpoint { - remote-endpoint = <&controller_out_rgb>; - }; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt deleted file mode 100644 index 83e2cae1cc1b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt +++ /dev/null @@ -1,7 +0,0 @@ -Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "ampire,am800480r3tmqwa1h" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt b/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt deleted file mode 100644 index 3dab52f92c26..000000000000 --- a/Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt +++ /dev/null @@ -1,12 +0,0 @@ -GiantPlus 3.0" (320x240 pixels) 24-bit TFT LCD panel - -Required properties: -- compatible: should be "giantplus,gpm940b0" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml new file mode 100644 index 000000000000..4ebcea7d0c63 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: leadtek,ltk500hd1829 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vcc-supply: + description: regulator that supplies the vcc voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + dsi@ff450000 { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk500hd1829"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vcc-supply = <&vcc_2v8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml new file mode 100644 index 000000000000..2834287b8d88 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel + +maintainers: + - Adam Ford <aford173@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: logicpd,type28 + + power-supply: true + enable-gpios: true + backlight: true + port: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + lcd0: display { + compatible = "logicpd,type28"; + enable-gpios = <&gpio5 27 0>; + backlight = <&backlight>; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml new file mode 100644 index 000000000000..8fe60ee2531c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple panels with one power supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the simple (dumb) panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel + - ampire,am800480r3tmqwa1h + # AUO B116XAK01 eDP TFT LCD panel + - auo,b116xa01 + # BOE NV140FHM-N49 14.0" FHD a-Si FT panel + - boe,nv140fhmn49 + # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel + - giantplus,gpm940b0 + # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel + - satoz,sat050at40h12r2 + # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel + - sharp,ls020b1dd01d + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt deleted file mode 100644 index e45edbc565a3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp 2.0" (240x160 pixels) 16-bit TFT LCD panel - -Required properties: -- compatible: should be "sharp,ls020b1dd01d" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml new file mode 100644 index 000000000000..185dcc8fd1f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony ACX424AKP 4" 480x864 AMOLED panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,acx424akp + reg: true + reset-gpios: true + vddi-supply: + description: regulator that supplies the vddi voltage + enforce-video-mode: true + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml new file mode 100644 index 000000000000..186e5e1c8fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: xinpeng,xpp055c272 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi@ff450000 { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml new file mode 100644 index 000000000000..a57037b9e9ba --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,cmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Color Management Module (CMM) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Jacopo Mondi <jacopo+renesas@jmondi.org> + +description: |+ + Renesas R-Car color management module connected to R-Car DU video channels. + It provides image enhancement functions such as 1-D look-up tables (LUT), + 3-D look-up tables (CLU), 1D-histogram generation (HGO), and color + space conversion (CSC). + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm + - items: + - const: renesas,rcar-gen2-cmm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> + #include <dt-bindings/power/r8a7796-sysc.h> + + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 17cb2771364b..eb4ae41fe41f 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -41,10 +41,14 @@ Required Properties: supplied they must be named "dclkin.x" with "x" being the input clock numerical index. - - vsps: A list of phandle and channel index tuples to the VSPs that handle - the memory interfaces for the DU channels. The phandle identifies the VSP - instance that serves the DU channel, and the channel index identifies the - LIF instance in that VSP. + - renesas,cmms: A list of phandles to the CMM instances present in the SoC, + one for each available DU channel. The property shall not be specified for + SoCs that do not provide any CMM (such as V3M and V3H). + + - renesas,vsps: A list of phandle and channel index tuples to the VSPs that + handle the memory interfaces for the DU channels. The phandle identifies the + VSP instance that serves the DU channel, and the channel index identifies + the LIF instance in that VSP. Required nodes: @@ -92,7 +96,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index ce4c1fc9116c..151be3bba06f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -4,13 +4,16 @@ Rockchip specific extensions to the Synopsys Designware MIPI DSI Required properties: - #address-cells: Should be <1>. - #size-cells: Should be <0>. -- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi". - "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi". +- compatible: one of + "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" - reg: Represent the physical address range of the controller. - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference - clock(ref) and APB clock(pclk). For RK3399, a phy config clock - (phy_cfg) and a grf clock(grf) are required. As described in [1]. + clock(ref) when using an internal dphy and APB clock(pclk). + For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) + are required. As described in [1]. - rockchip,grf: this soc should set GRF regs to mux vopl/vopb. - ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl. @@ -18,6 +21,8 @@ Required properties: - video port 1 for either a panel or subsequent encoder Optional properties: +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "dphy" if phys references an external phy. - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt index 7849ff039229..aaf8c44cf90f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -4,6 +4,7 @@ Rockchip RK3288 LVDS interface Required properties: - compatible: matching the soc type, one of - "rockchip,rk3288-lvds"; + - "rockchip,px30-lvds"; - reg: physical base address of the controller and length of memory mapped region. @@ -18,6 +19,9 @@ Required properties: - rockchip,grf: phandle to the general register files syscon - rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface +- phys: LVDS/DSI DPHY (px30 only) +- phy-names: name of the PHY, must be "dphy" (px30 only) + Optional properties: - pinctrl-names: must contain a "lcdc" entry. - pinctrl-0: pin control group to be used for this controller. diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt deleted file mode 100644 index 31ab72cba3d4..000000000000 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ /dev/null @@ -1,637 +0,0 @@ -Allwinner A10 Display Pipeline -============================== - -The Allwinner A10 Display pipeline is composed of several components -that are going to be documented below: - -For all connections between components up to the TCONs in the display -pipeline, when there are multiple components of the same type at the -same depth, the local endpoint ID must be the same as the remote -component's index. For example, if the remote endpoint is Frontend 1, -then the local endpoint ID must be 1. - - Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 - [1] -- -- [1] [1] -- -- [1] - \ / \ / - X X - / \ / \ - [0] -- -- [0] [0] -- -- [0] - Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 - -For a two pipeline system such as the one depicted above, the lines -represent the connections between the components, while the numbers -within the square brackets corresponds to the ID of the local endpoint. - -The same rule also applies to DE 2.0 mixer-TCON connections: - - Mixer 0 [0] ----------- [0] TCON 0 - [1] ---- ---- [1] - \ / - X - / \ - [0] ---- ---- [0] - Mixer 1 [1] ----------- [1] TCON 1 - -HDMI Encoder ------------- - -The HDMI Encoder supports the HDMI video and audio outputs, and does -CEC. It is one end of the pipeline. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-hdmi - * allwinner,sun5i-a10s-hdmi - * allwinner,sun6i-a31-hdmi - - reg: base address and size of memory-mapped region - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the HDMI encoder - * ahb: the HDMI interface clock - * mod: the HDMI module clock - * ddc: the HDMI ddc clock (A31 only) - * pll-0: the first video PLL - * pll-1: the second video PLL - - clock-names: the clock names mentioned above - - resets: phandle to the reset control for the HDMI encoder (A31 only) - - dmas: phandles to the DMA channels used by the HDMI encoder - * ddc-tx: The channel for DDC transmission - * ddc-rx: The channel for DDC reception - * audio-tx: The channel used for audio transmission - - dma-names: the channel names mentioned above - - - ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. The second should be the - output, usually to an HDMI connector. - -DWC HDMI TX Encoder -------------------- - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with Allwinner's own PHY IP. It supports audio and video outputs and CEC. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - -Required properties: - - - compatible: value must be one of: - * "allwinner,sun8i-a83t-dw-hdmi" - * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" - * "allwinner,sun50i-h6-dw-hdmi" - - reg: base address and size of memory-mapped region - - reg-io-width: See dw_hdmi.txt. Shall be 1. - - interrupts: HDMI interrupt number - - clocks: phandles to the clocks feeding the HDMI encoder - * iahb: the HDMI bus clock - * isfr: the HDMI register clock - * tmds: TMDS clock - * cec: HDMI CEC clock (H6 only) - * hdcp: HDCP clock (H6 only) - * hdcp-bus: HDCP bus clock (H6 only) - - clock-names: the clock names mentioned above - - resets: - * ctrl: HDMI controller reset - * hdcp: HDCP reset (H6 only) - - reset-names: reset names mentioned above - - phys: phandle to the DWC HDMI PHY - - phy-names: must be "phy" - - - ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. The second should be the - output, usually to an HDMI connector. - -Optional properties: - - hvcc-supply: the VCC power supply of the controller - -DWC HDMI PHY ------------- - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-a83t-hdmi-phy - * allwinner,sun8i-h3-hdmi-phy - * allwinner,sun8i-r40-hdmi-phy - * allwinner,sun50i-a64-hdmi-phy - * allwinner,sun50i-h6-hdmi-phy - - reg: base address and size of memory-mapped region - - clocks: phandles to the clocks feeding the HDMI PHY - * bus: the HDMI PHY interface clock - * mod: the HDMI PHY module clock - - clock-names: the clock names mentioned above - - resets: phandle to the reset controller driving the PHY - - reset-names: must be "phy" - -H3, A64 and R40 HDMI PHY require additional clocks: - - pll-0: parent of phy clock - - pll-1: second possible phy clock parent (A64/R40 only) - -TV Encoder ----------- - -The TV Encoder supports the composite and VGA output. It is one end of -the pipeline. - -Required properties: - - compatible: value should be "allwinner,sun4i-a10-tv-encoder". - - reg: base address and size of memory-mapped region - - clocks: the clocks driving the TV encoder - - resets: phandle to the reset controller driving the encoder - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint. - -TCON ----- - -The TCON acts as a timing controller for RGB, LVDS and TV interfaces. - -Required properties: - - compatible: value must be either: - * allwinner,sun4i-a10-tcon - * allwinner,sun5i-a13-tcon - * allwinner,sun6i-a31-tcon - * allwinner,sun6i-a31s-tcon - * allwinner,sun7i-a20-tcon - * allwinner,sun8i-a23-tcon - * allwinner,sun8i-a33-tcon - * allwinner,sun8i-a83t-tcon-lcd - * allwinner,sun8i-a83t-tcon-tv - * allwinner,sun8i-r40-tcon-tv - * allwinner,sun8i-v3s-tcon - * allwinner,sun9i-a80-tcon-lcd - * allwinner,sun9i-a80-tcon-tv - * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" - * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" - * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - - reg: base address and size of memory-mapped region - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the TCON. - - 'ahb': the interface clocks - - 'tcon-ch0': The clock driving the TCON channel 0, if supported - - resets: phandles to the reset controllers driving the encoder - - "lcd": the reset line for the TCON - - "edp": the reset line for the eDP block (A80 only) - - - clock-names: the clock names mentioned above - - reset-names: the reset names mentioned above - - clock-output-names: Name of the pixel clock created, if TCON supports - channel 0. - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, the second one the output - - The output may have multiple endpoints. TCON can have 1 or 2 channels, - usually with the first channel being used for the panels interfaces - (RGB, LVDS, etc.), and the second being used for the outputs that - require another controller (TV Encoder, HDMI, etc.). The endpoints - will take an extra property, allwinner,tcon-channel, to specify the - channel the endpoint is associated to. If that property is not - present, the endpoint number will be used as the channel number. - -For TCONs with channel 0, there is one more clock required: - - 'tcon-ch0': The clock driving the TCON channel 0 -For TCONs with channel 1, there is one more clock required: - - 'tcon-ch1': The clock driving the TCON channel 1 - -When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found -in A13, H3, H5 and V3s SoCs), you need one more reset line: - - 'lvds': The reset line driving the LVDS logic - -And on the A23, A31, A31s and A33, you need one more clock line: - - 'lvds-alt': An alternative clock source, separate from the TCON channel 0 - clock, that can be used to drive the LVDS clock - -TCON TOP --------- - -TCON TOPs main purpose is to configure whole display pipeline. It determines -relationships between mixers and TCONs, selects source TCON for HDMI, muxes -LCD and TV encoder GPIO output, selects TV encoder clock source and contains -additional TV TCON and DSI gates. - -It allows display pipeline to be configured in very different ways: - - / LCD0/LVDS0 - / [0] TCON-LCD0 - | \ MIPI DSI - mixer0 | - \ / [1] TCON-LCD1 - LCD1/LVDS1 - TCON-TOP - / \ [2] TCON-TV0 [0] - TVE0/RGB - mixer1 | \ - | TCON-TOP - HDMI - | / - \ [3] TCON-TV1 [1] - TVE1/RGB - -Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. Not all TCON TOP variants support all features. - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-r40-tcon-top - * allwinner,sun50i-h6-tcon-top - - reg: base address and size of the memory-mapped region. - - clocks: phandle to the clocks feeding the TCON TOP - * bus: TCON TOP interface clock - * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock (R40 only) - * tcon-tv1: TCON TV1 clock (R40 only) - * tve1: TVE0 clock (R40 only) - * dsi: MIPI DSI clock (R40 only) - - clock-names: clock name mentioned above - - resets: phandle to the reset line driving the TCON TOP - - #clock-cells : must contain 1 - - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in - that order. - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should - be defined: - * port 0 is input for mixer0 mux - * port 1 is output for mixer0 mux - * port 2 is input for mixer1 mux - * port 3 is output for mixer1 mux - * port 4 is input for HDMI mux - * port 5 is output for HDMI mux - All output endpoints for mixer muxes and input endpoints for HDMI mux should - have reg property with the id of the target TCON, as shown in above graph - (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one - endpoint connected to remote endpoint. - -DRC ---- - -The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs -(A31, A23, A33, A80), allows to dynamically adjust pixel -brightness/contrast based on histogram measurements for LCD content -adaptive backlight control. - - -Required properties: - - compatible: value must be one of: - * allwinner,sun6i-a31-drc - * allwinner,sun6i-a31s-drc - * allwinner,sun8i-a23-drc - * allwinner,sun8i-a33-drc - * allwinner,sun9i-a80-drc - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the DRC - * ahb: the DRC interface clock - * mod: the DRC module clock - * ram: the DRC DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset line driving the DRC - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine Backend ----------------------- - -The display engine backend exposes layers and sprites to the -system. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-backend - * allwinner,sun5i-a13-display-backend - * allwinner,sun6i-a31-display-backend - * allwinner,sun7i-a20-display-backend - * allwinner,sun8i-a23-display-backend - * allwinner,sun8i-a33-display-backend - * allwinner,sun9i-a80-display-backend - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the frontend and backend - * ahb: the backend interface clock - * mod: the backend module clock - * ram: the backend DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the backend - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the output - -On the A33, some additional properties are required: - - reg needs to have an additional region corresponding to the SAT - - reg-names need to be set, with "be" and "sat" - - clocks and clock-names need to have a phandle to the SAT bus - clocks, whose name will be "sat" - - resets and reset-names need to have a phandle to the SAT bus - resets, whose name will be "sat" - -DEU ---- - -The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC, -can sharpen the display content in both luma and chroma channels. - -Required properties: - - compatible: value must be one of: - * allwinner,sun9i-a80-deu - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the DEU - * ahb: the DEU interface clock - * mod: the DEU module clock - * ram: the DEU DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset line driving the DEU - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine Frontend ------------------------ - -The display engine frontend does formats conversion, scaling, -deinterlacing and color space conversion. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-frontend - * allwinner,sun5i-a13-display-frontend - * allwinner,sun6i-a31-display-frontend - * allwinner,sun7i-a20-display-frontend - * allwinner,sun8i-a23-display-frontend - * allwinner,sun8i-a33-display-frontend - * allwinner,sun9i-a80-display-frontend - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the frontend and backend - * ahb: the backend interface clock - * mod: the backend module clock - * ram: the backend DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the backend - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the outputs - -Display Engine 2.0 Mixer ------------------------- - -The DE2 mixer have many functionalities, currently only layer blending is -supported. - -Required properties: - - compatible: value must be one of: - * allwinner,sun8i-a83t-de2-mixer-0 - * allwinner,sun8i-a83t-de2-mixer-1 - * allwinner,sun8i-h3-de2-mixer-0 - * allwinner,sun8i-r40-de2-mixer-0 - * allwinner,sun8i-r40-de2-mixer-1 - * allwinner,sun8i-v3s-de2-mixer - * allwinner,sun50i-a64-de2-mixer-0 - * allwinner,sun50i-a64-de2-mixer-1 - * allwinner,sun50i-h6-de3-mixer-0 - - reg: base address and size of the memory-mapped region. - - clocks: phandles to the clocks feeding the mixer - * bus: the mixer interface clock - * mod: the mixer module clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset controllers driving the mixer - -- ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoints, the second one the output - - -Display Engine Pipeline ------------------------ - -The display engine pipeline (and its entry point, since it can be -either directly the backend or the frontend) is represented as an -extra node. - -Required properties: - - compatible: value must be one of: - * allwinner,sun4i-a10-display-engine - * allwinner,sun5i-a10s-display-engine - * allwinner,sun5i-a13-display-engine - * allwinner,sun6i-a31-display-engine - * allwinner,sun6i-a31s-display-engine - * allwinner,sun7i-a20-display-engine - * allwinner,sun8i-a23-display-engine - * allwinner,sun8i-a33-display-engine - * allwinner,sun8i-a83t-display-engine - * allwinner,sun8i-h3-display-engine - * allwinner,sun8i-r40-display-engine - * allwinner,sun8i-v3s-display-engine - * allwinner,sun9i-a80-display-engine - * allwinner,sun50i-a64-display-engine - * allwinner,sun50i-h6-display-engine - - - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0/3.0) available. - -Example: - -panel: panel { - compatible = "olimex,lcd-olinuxino-43-ts"; - #address-cells = <1>; - #size-cells = <0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; -}; - -hdmi: hdmi@1c16000 { - compatible = "allwinner,sun5i-a10s-hdmi"; - reg = <0x01c16000 0x1000>; - interrupts = <58>; - clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, - <&ccu CLK_PLL_VIDEO0_2X>, - <&ccu CLK_PLL_VIDEO1_2X>; - clock-names = "ahb", "mod", "pll-0", "pll-1"; - dmas = <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_DEDICATED 24>; - dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hdmi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_hdmi>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -tve0: tv-encoder@1c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; -}; - -tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; -}; - -fe0: display-frontend@1e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint { - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; -}; - -be0: display-backend@1e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - interrupts = <47>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; -}; - -display-engine { - compatible = "allwinner,sun5i-a13-display-engine"; - allwinner,pipelines = <&fe0>; -}; diff --git a/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt b/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt deleted file mode 100644 index a58ae7756fc6..000000000000 --- a/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for tilcdc DRM TFP410 output driver - -Required properties: - - compatible: value should be "ti,tilcdc,tfp410". - - i2c: the phandle for the i2c device to use for DDC - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - - powerdn-gpio: the powerdown GPIO, pulled low to power down the - TFP410 device (for DPMS_OFF) - -Example: - - dvicape { - compatible = "ti,tilcdc,tfp410"; - i2c = <&i2c2>; - pinctrl-names = "default"; - pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; - powerdn-gpio = <&gpio2 31 0>; - }; diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml new file mode 100644 index 000000000000..0c0ac11ad55f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DMA Controller bindings + +description: | + The STM32 DMA is a general-purpose direct memory access controller capable of + supporting 8 independent DMA channels. Each channel can have up to 8 requests. + DMA clients connected to the STM32 DMA controller must use the format + described in the dma.txt file, using a four-cell specifier for each + channel: a phandle to the DMA controller plus the following four integer cells: + 1. The channel id + 2. The request line number + 3. A 32bit mask specifying the DMA channel configuration which are device + dependent: + -bit 9: Peripheral Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 10: Memory Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 15: Peripheral Increment Offset Size + 0x0: offset size is linked to the peripheral bus width + 0x1: offset size is fixed to 4 (32-bit alignment) + -bit 16-17: Priority level + 0x0: low + 0x1: medium + 0x2: high + 0x3: very high + 4. A 32bit bitfield value specifying DMA features which are device dependent: + -bit 0-1: DMA FIFO threshold selection + 0x0: 1/4 full FIFO + 0x1: 1/2 full FIFO + 0x2: 3/4 full FIFO + 0x3: full FIFO + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + "#dma-cells": + const: 4 + + compatible: + const: st,stm32-dma + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 8 + description: Should contain all of the per-channel DMA + interrupts in ascending order with respect to the + DMA channel index. + + resets: + maxItems: 1 + + st,mem2mem: + $ref: /schemas/types.yaml#/definitions/flag + description: if defined, it indicates that the controller + supports memory-to-memory transfer + +required: + - compatible + - reg + - clocks + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&clk_hclk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-requests = <8>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml new file mode 100644 index 000000000000..915bc4af9568 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +allOf: + - $ref: "dma-router.yaml#" + +properties: + "#dma-cells": + const: 3 + + compatible: + const: st,stm32h7-dmamux + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - dma-masters + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x3c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-channels = <16>; + dma-masters = <&dma1 &dma2>; + clocks = <&timer_clk>; + }; + +... + diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml new file mode 100644 index 000000000000..c66543d0c267 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 MDMA Controller bindings + +description: | + The STM32 MDMA is a general-purpose direct memory access controller capable of + supporting 64 independent DMA channels with 256 HW requests. + DMA clients connected to the STM32 MDMA controller must use the format + described in the dma.txt file, using a five-cell specifier for each channel: + a phandle to the MDMA controller plus the following five integer cells: + 1. The request line number + 2. The priority level + 0x0: Low + 0x1: Medium + 0x2: High + 0x3: Very high + 3. A 32bit mask specifying the DMA channel configuration + -bit 0-1: Source increment mode + 0x0: Source address pointer is fixed + 0x2: Source address pointer is incremented after each data transfer + 0x3: Source address pointer is decremented after each data transfer + -bit 2-3: Destination increment mode + 0x0: Destination address pointer is fixed + 0x2: Destination address pointer is incremented after each data transfer + 0x3: Destination address pointer is decremented after each data transfer + -bit 8-9: Source increment offset size + 0x0: byte (8bit) + 0x1: half-word (16bit) + 0x2: word (32bit) + 0x3: double-word (64bit) + -bit 10-11: Destination increment offset size + 0x0: byte (8bit) + 0x1: half-word (16bit) + 0x2: word (32bit) + 0x3: double-word (64bit) + -bit 25-18: The number of bytes to be transferred in a single transfer + (min = 1 byte, max = 128 bytes) + -bit 29:28: Trigger Mode + 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes) + 0x1: Each MDMA request triggers a block transfer (max 64K bytes) + 0x2: Each MDMA request triggers a repeated block transfer + 0x3: Each MDMA request triggers a linked list transfer + 4. A 32bit value specifying the register to be used to acknowledge the request + if no HW ack signal is used by the MDMA client + 5. A 32bit mask specifying the value to be written to acknowledge the request + if no HW ack signal is used by the MDMA client + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + "#dma-cells": + const: 5 + + compatible: + const: st,stm32h7-mdma + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + st,ahb-addr-masks: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: Array of u32 mask to list memory devices addressed via AHB bus. + +required: + - compatible + - reg + - clocks + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + dma-controller@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&timer_clk>; + resets = <&rcc 992>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + st,ahb-addr-masks = <0x20000000>, <0x00000000>; + }; + +... + diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt deleted file mode 100644 index c5f519097204..000000000000 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ /dev/null @@ -1,83 +0,0 @@ -* STMicroelectronics STM32 DMA controller - -The STM32 DMA is a general-purpose direct memory access controller capable of -supporting 8 independent DMA channels. Each channel can have up to 8 requests. - -Required properties: -- compatible: Should be "st,stm32-dma" -- reg: Should contain DMA registers location and length. This should include - all of the per-channel registers. -- interrupts: Should contain all of the per-channel DMA interrupts in - ascending order with respect to the DMA channel index. -- clocks: Should contain the input clock of the DMA instance. -- #dma-cells : Must be <4>. See DMA client paragraph for more details. - -Optional properties: -- dma-requests : Number of DMA requests supported. -- resets: Reference to a reset controller asserting the DMA controller -- st,mem2mem: boolean; if defined, it indicates that the controller supports - memory-to-memory transfer - -Example: - - dma2: dma-controller@40026400 { - compatible = "st,stm32-dma"; - reg = <0x40026400 0x400>; - interrupts = <56>, - <57>, - <58>, - <59>, - <60>, - <68>, - <69>, - <70>; - clocks = <&clk_hclk>; - #dma-cells = <4>; - st,mem2mem; - resets = <&rcc 150>; - dma-requests = <8>; - }; - -* DMA client - -DMA clients connected to the STM32 DMA controller must use the format -described in the dma.txt file, using a four-cell specifier for each -channel: a phandle to the DMA controller plus the following four integer cells: - -1. The channel id -2. The request line number -3. A 32bit mask specifying the DMA channel configuration which are device - dependent: - -bit 9: Peripheral Increment Address - 0x0: no address increment between transfers - 0x1: increment address between transfers - -bit 10: Memory Increment Address - 0x0: no address increment between transfers - 0x1: increment address between transfers - -bit 15: Peripheral Increment Offset Size - 0x0: offset size is linked to the peripheral bus width - 0x1: offset size is fixed to 4 (32-bit alignment) - -bit 16-17: Priority level - 0x0: low - 0x1: medium - 0x2: high - 0x3: very high -4. A 32bit bitfield value specifying DMA features which are device dependent: - -bit 0-1: DMA FIFO threshold selection - 0x0: 1/4 full FIFO - 0x1: 1/2 full FIFO - 0x2: 3/4 full FIFO - 0x3: full FIFO - - -Example: - - usart1: serial@40011000 { - compatible = "st,stm32-uart"; - reg = <0x40011000 0x400>; - interrupts = <37>; - clocks = <&clk_pclk2>; - dmas = <&dma2 2 4 0x10400 0x3>, - <&dma2 7 5 0x10200 0x3>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt deleted file mode 100644 index 1b893b235507..000000000000 --- a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt +++ /dev/null @@ -1,84 +0,0 @@ -STM32 DMA MUX (DMA request router) - -Required properties: -- compatible: "st,stm32h7-dmamux" -- reg: Memory map for accessing module -- #dma-cells: Should be set to <3>. - First parameter is request line number. - Second is DMA channel configuration - Third is Fifo threshold - For more details about the three cells, please see - stm32-dma.txt documentation binding file -- dma-masters: Phandle pointing to the DMA controllers. - Several controllers are allowed. Only "st,stm32-dma" DMA - compatible are supported. - -Optional properties: -- dma-channels : Number of DMA requests supported. -- dma-requests : Number of DMAMUX requests supported. -- resets: Reference to a reset controller asserting the DMA controller -- clocks: Input clock of the DMAMUX instance. - -Example: - -/* DMA controller 1 */ -dma1: dma-controller@40020000 { - compatible = "st,stm32-dma"; - reg = <0x40020000 0x400>; - interrupts = <11>, - <12>, - <13>, - <14>, - <15>, - <16>, - <17>, - <47>; - clocks = <&timer_clk>; - #dma-cells = <4>; - st,mem2mem; - resets = <&rcc 150>; - dma-channels = <8>; - dma-requests = <8>; -}; - -/* DMA controller 1 */ -dma2: dma@40020400 { - compatible = "st,stm32-dma"; - reg = <0x40020400 0x400>; - interrupts = <56>, - <57>, - <58>, - <59>, - <60>, - <68>, - <69>, - <70>; - clocks = <&timer_clk>; - #dma-cells = <4>; - st,mem2mem; - resets = <&rcc 150>; - dma-channels = <8>; - dma-requests = <8>; -}; - -/* DMA mux */ -dmamux1: dma-router@40020800 { - compatible = "st,stm32h7-dmamux"; - reg = <0x40020800 0x3c>; - #dma-cells = <3>; - dma-requests = <128>; - dma-channels = <16>; - dma-masters = <&dma1 &dma2>; - clocks = <&timer_clk>; -}; - -/* DMA client */ -usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; - reg = <0x40011000 0x400>; - interrupts = <37>; - clocks = <&timer_clk>; - dmas = <&dmamux1 41 0x414 0>, - <&dmamux1 42 0x414 0>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt deleted file mode 100644 index d18772d6bc65..000000000000 --- a/Documentation/devicetree/bindings/dma/stm32-mdma.txt +++ /dev/null @@ -1,94 +0,0 @@ -* STMicroelectronics STM32 MDMA controller - -The STM32 MDMA is a general-purpose direct memory access controller capable of -supporting 64 independent DMA channels with 256 HW requests. - -Required properties: -- compatible: Should be "st,stm32h7-mdma" -- reg: Should contain MDMA registers location and length. This should include - all of the per-channel registers. -- interrupts: Should contain the MDMA interrupt. -- clocks: Should contain the input clock of the DMA instance. -- resets: Reference to a reset controller asserting the DMA controller. -- #dma-cells : Must be <5>. See DMA client paragraph for more details. - -Optional properties: -- dma-channels: Number of DMA channels supported by the controller. -- dma-requests: Number of DMA request signals supported by the controller. -- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via - AHB bus. - -Example: - - mdma1: dma@52000000 { - compatible = "st,stm32h7-mdma"; - reg = <0x52000000 0x1000>; - interrupts = <122>; - clocks = <&timer_clk>; - resets = <&rcc 992>; - #dma-cells = <5>; - dma-channels = <16>; - dma-requests = <32>; - st,ahb-addr-masks = <0x20000000>, <0x00000000>; - }; - -* DMA client - -DMA clients connected to the STM32 MDMA controller must use the format -described in the dma.txt file, using a five-cell specifier for each channel: -a phandle to the MDMA controller plus the following five integer cells: - -1. The request line number -2. The priority level - 0x00: Low - 0x01: Medium - 0x10: High - 0x11: Very high -3. A 32bit mask specifying the DMA channel configuration - -bit 0-1: Source increment mode - 0x00: Source address pointer is fixed - 0x10: Source address pointer is incremented after each data transfer - 0x11: Source address pointer is decremented after each data transfer - -bit 2-3: Destination increment mode - 0x00: Destination address pointer is fixed - 0x10: Destination address pointer is incremented after each data - transfer - 0x11: Destination address pointer is decremented after each data - transfer - -bit 8-9: Source increment offset size - 0x00: byte (8bit) - 0x01: half-word (16bit) - 0x10: word (32bit) - 0x11: double-word (64bit) - -bit 10-11: Destination increment offset size - 0x00: byte (8bit) - 0x01: half-word (16bit) - 0x10: word (32bit) - 0x11: double-word (64bit) --bit 25-18: The number of bytes to be transferred in a single transfer - (min = 1 byte, max = 128 bytes) --bit 29:28: Trigger Mode - 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes) - 0x01: Each MDMA request triggers a block transfer (max 64K bytes) - 0x10: Each MDMA request triggers a repeated block transfer - 0x11: Each MDMA request triggers a linked list transfer -4. A 32bit value specifying the register to be used to acknowledge the request - if no HW ack signal is used by the MDMA client -5. A 32bit mask specifying the value to be written to acknowledge the request - if no HW ack signal is used by the MDMA client - -Example: - - i2c4: i2c@5c002000 { - compatible = "st,stm32f7-i2c"; - reg = <0x5c002000 0x400>; - interrupts = <95>, - <96>; - clocks = <&timer_clk>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>, - <&mdma1 37 0x0 0x40002 0x0 0x0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt index b245363d6d60..f0c072ff9eca 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt @@ -4,6 +4,7 @@ Required properties: - compatible : - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc - "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc + - "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc - reg : address and length of the lpi2c master registers - interrupts : lpi2c interrupt - clocks : lpi2c clock specifier diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 6eb33207a167..5117ad68a584 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -82,7 +82,7 @@ properties: Must be the device tree identifier of the over-sampling mode pins. As the line is active high, it should be marked GPIO_ACTIVE_HIGH. - maxItems: 1 + maxItems: 3 adi,sw-mode: description: @@ -125,9 +125,9 @@ examples: adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH - &gpio 23 GPIO_ACTIVE_HIGH - &gpio 26 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; adi,sw-mode; }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt deleted file mode 100644 index 75ba25d062e1..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt +++ /dev/null @@ -1,135 +0,0 @@ -STMicroelectronics STM32 DFSDM ADC device driver - - -STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to -interface external sigma delta modulators to STM32 micro controllers. -It is mainly targeted for: -- Sigma delta modulators (motor control, metering...) -- PDM microphones (audio digital microphone) - -It features up to 8 serial digital interfaces (SPI or Manchester) and -up to 4 filters on stm32h7 or 6 filters on stm32mp1. - -Each child node match with a filter instance. - -Contents of a STM32 DFSDM root node: ------------------------------------- -Required properties: -- compatible: Should be one of: - "st,stm32h7-dfsdm" - "st,stm32mp1-dfsdm" -- reg: Offset and length of the DFSDM block register set. -- clocks: IP and serial interfaces clocking. Should be set according - to rcc clock ID and "clock-names". -- clock-names: Input clock name "dfsdm" must be defined, - "audio" is optional. If defined CLKOUT is based on the audio - clock, else "dfsdm" is used. -- #interrupt-cells = <1>; -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- spi-max-frequency: Requested only for SPI master mode. - SPI clock OUT frequency (Hz). This clock must be set according - to "clock" property. Frequency must be a multiple of the rcc - clock frequency. If not, SPI CLKOUT frequency will not be - accurate. -- pinctrl-names: Set to "default". -- pinctrl-0: List of phandles pointing to pin configuration - nodes to set pins in mode of operation for dfsdm - on external pin. - -Contents of a STM32 DFSDM child nodes: --------------------------------------- - -Required properties: -- compatible: Must be: - "st,stm32-dfsdm-adc" for sigma delta ADCs - "st,stm32-dfsdm-dmic" for audio digital microphone. -- reg: Specifies the DFSDM filter instance used. - Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1. -- interrupts: IRQ lines connected to each DFSDM filter instance. -- st,adc-channels: List of single-ended channels muxed for this ADC. - valid values: - "st,stm32h7-dfsdm" compatibility: 0 to 7. -- st,adc-channel-names: List of single-ended channel names. -- st,filter-order: SinC filter order from 0 to 5. - 0: FastSinC - [1-5]: order 1 to 5. - For audio purpose it is recommended to use order 3 to 5. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". - -Required properties for "st,stm32-dfsdm-adc" compatibility: -- io-channels: From common IIO binding. Used to pipe external sigma delta - modulator or internal ADC output to DFSDM channel. - This is not required for "st,stm32-dfsdm-pdm" compatibility as - PDM microphone is binded in Audio DT node. - -Required properties for "st,stm32-dfsdm-pdm" compatibility: -- #sound-dai-cells: Must be set to 0. -- dma: DMA controller phandle and DMA request line associated to the - filter instance (specified by the field "reg") -- dma-names: Must be "rx" - -Optional properties: -- st,adc-channel-types: Single-ended channel input type. - - "SPI_R": SPI with data on rising edge (default) - - "SPI_F": SPI with data on falling edge - - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 -- st,adc-channel-clk-src: Conversion clock source. - - "CLKIN": external SPI clock (CLKIN x) - - "CLKOUT": internal SPI clock (CLKOUT) (default) - - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). - -- st,adc-alt-channel: Must be defined if two sigma delta modulator are - connected on same SPI input. - If not set, channel n is connected to SPI input n. - If set, channel n is connected to SPI input n + 1. - -- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. - Used for multi microphones synchronization. - -Example of a sigma delta adc connected on DFSDM SPI port 0 -and a pdm microphone connected on DFSDM SPI port 1: - - ads1202: simple_sd_adc@0 { - compatible = "ads1202"; - #io-channel-cells = <1>; - }; - - dfsdm: dfsdm@40017000 { - compatible = "st,stm32h7-dfsdm"; - reg = <0x40017000 0x400>; - clocks = <&rcc DFSDM1_CK>; - clock-names = "dfsdm"; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dfsdm_adc0: filter@0 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <0>; - interrupts = <110>; - st,adc-channels = <0>; - st,adc-channel-names = "sd_adc0"; - st,adc-channel-types = "SPI_F"; - st,adc-channel-clk-src = "CLKOUT"; - io-channels = <&ads1202 0>; - st,filter-order = <3>; - }; - dfsdm_pdm1: filter@1 { - compatible = "st,stm32-dfsdm-dmic"; - reg = <1>; - interrupts = <111>; - dmas = <&dmamux1 102 0x400 0x00>; - dma-names = "rx"; - st,adc-channels = <1>; - st,adc-channel-names = "dmic1"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; - st,filter-order = <5>; - }; - } diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml new file mode 100644 index 000000000000..c91407081aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/st,stm32-dfsdm-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DFSDM ADC device driver + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + - Olivier Moysan <olivier.moysan@st.com> + +description: | + STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to + interface external sigma delta modulators to STM32 micro controllers. + It is mainly targeted for: + - Sigma delta modulators (motor control, metering...) + - PDM microphones (audio digital microphone) + + It features up to 8 serial digital interfaces (SPI or Manchester) and + up to 4 filters on stm32h7 or 6 filters on stm32mp1. + + Each child node matches with a filter instance. + +properties: + compatible: + enum: + - st,stm32h7-dfsdm + - st,stm32mp1-dfsdm + + reg: + maxItems: 1 + + clocks: + items: + - description: + Internal clock used for DFSDM digital processing and control blocks. + dfsdm clock can also feed CLKOUT, when CLKOUT is used. + - description: audio clock can be used as an alternate to feed CLKOUT. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: dfsdm + - const: audio + minItems: 1 + maxItems: 2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-max-frequency: + description: + SPI clock OUT frequency (Hz). Requested only for SPI master mode. + This clock must be set according to the "clock" property. + Frequency must be a multiple of the rcc clock frequency. + If not, SPI CLKOUT frequency will not be accurate. + maximum: 20000000 + +required: + - compatible + - reg + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +patternProperties: + "^filter@[0-9]+$": + type: object + description: child node + + properties: + compatible: + enum: + - st,stm32-dfsdm-adc + - st,stm32-dfsdm-dmic + + reg: + description: Specifies the DFSDM filter instance used. + maxItems: 1 + + interrupts: + maxItems: 1 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. + On stm32h7 and stm32mp1: + - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. + - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minimum: 0 + maximum: 7 + + st,adc-channel-names: + description: List of single-ended channel names. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + + st,filter-order: + description: | + SinC filter order from 0 to 5. + - 0: FastSinC + - [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - items: + minimum: 0 + maximum: 5 + + "#io-channel-cells": + const: 1 + + st,adc-channel-types: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + items: + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + allOf: + - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + items: + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + allOf: + - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + st,filter0-sync: + description: + Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + type: boolean + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + required: + - compatible + - reg + - interrupts + - st,adc-channels + - st,adc-channel-names + - st,filter-order + - "#io-channel-cells" + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-adc + + - then: + properties: + st,adc-channels: + minItems: 1 + maxItems: 8 + + st,adc-channel-names: + minItems: 1 + maxItems: 8 + + st,adc-channel-types: + minItems: 1 + maxItems: 8 + + st,adc-channel-clk-src: + minItems: 1 + maxItems: 8 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + + required: + - io-channels + + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-dmic + + - then: + properties: + st,adc-channels: + maxItems: 1 + + st,adc-channel-names: + maxItems: 1 + + st,adc-channel-types: + maxItems: 1 + + st,adc-channel-clk-src: + maxItems: 1 + + required: + - dmas + - dma-names + + patternProperties: + "^dfsdm-dai+$": + type: object + description: child node + + properties: + "#sound-dai-cells": + const: 0 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + + required: + - "#sound-dai-cells" + - io-channels + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32h7-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 3 + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 5 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>; + clock-names = "dfsdm", "audio"; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <1>; + st,adc-channel-names = "dmic0"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + + asoc_pdm0: dfsdm-dai { + compatible = "st,stm32h7-dfsdm-dai"; + #sound-dai-cells = <0>; + io-channels = <&dfsdm0 0>; + }; + }; + + dfsdm_pdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <2 3>; + st,adc-channel-names = "in2", "in3"; + st,adc-channel-types = "SPI_R", "SPI_R"; + st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; + io-channels = <&sd_adc2 &sd_adc3>; + st,filter-order = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 9fa6f9795d50..26d770ef3601 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -1,173 +1 @@ -* Common leds properties. - -LED and flash LED devices provide the same basic functionality as current -regulators, but extended with LED and flash LED specific features like -blinking patterns, flash timeout, flash faults and external flash strobe mode. - -Many LED devices expose more than one current output that can be connected -to one or more discrete LED component. Since the arrangement of connections -can influence the way of the LED device initialization, the LED components -have to be tightly coupled with the LED device binding. They are represented -by child nodes of the parent LED device binding. - - -Optional properties for child nodes: -- led-sources : List of device current outputs the LED is connected to. The - outputs are identified by the numbers that must be defined - in the LED device binding documentation. - -- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions - from the header include/dt-bindings/leds/common.h. - If there is no matching LED_FUNCTION available, add a new one. - -- color : Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions - from the header include/dt-bindings/leds/common.h. - If there is no matching LED_COLOR_ID available, add a new one. - -- function-enumerator: Integer to be used when more than one instance - of the same function is needed, differing only with - an ordinal number. - -- label : The label for this LED. If omitted, the label is taken from the node - name (excluding the unit address). It has to uniquely identify - a device, i.e. no other LED class device can be assigned the same - label. This property is deprecated - use 'function' and 'color' - properties instead. function-enumerator has no effect when this - property is present. - -- default-state : The initial state of the LED. Valid values are "on", "off", - and "keep". If the LED is already on or off and the default-state property is - set the to same value, then no glitch should be produced where the LED - momentarily turns off (or on). The "keep" setting will keep the LED at - whatever its current state is, without producing a glitch. The default is - off if this property is not present. - -- linux,default-trigger : This parameter, if present, is a - string defining the trigger assigned to the LED. Current triggers are: - "backlight" - LED will act as a back-light, controlled by the framebuffer - system - "default-on" - LED will turn on (but for leds-gpio see "default-state" - property in Documentation/devicetree/bindings/leds/leds-gpio.txt) - "heartbeat" - LED "double" flashes at a load average based rate - "disk-activity" - LED indicates disk activity - "ide-disk" - LED indicates IDE disk activity (deprecated), - in new implementations use "disk-activity" - "timer" - LED flashes at a fixed, configurable rate - "pattern" - LED alters the brightness for the specified duration with one - software timer (requires "led-pattern" property) - -- led-pattern : Array of integers with default pattern for certain triggers. - Each trigger may parse this property differently: - - one-shot : two numbers specifying delay on and delay off (in ms), - - timer : two numbers specifying delay on and delay off (in ms), - - pattern : the pattern is given by a series of tuples, of - brightness and duration (in ms). The exact format is - described in: - Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - - -- led-max-microamp : Maximum LED supply current in microamperes. This property - can be made mandatory for the board configurations - introducing a risk of hardware damage in case an excessive - current is set. - For flash LED controllers with configurable current this - property is mandatory for the LEDs in the non-flash modes - (e.g. torch or indicator). - -- panic-indicator : This property specifies that the LED should be used, - if at all possible, as a panic indicator. - -- trigger-sources : List of devices which should be used as a source triggering - this LED activity. Some LEDs can be related to a specific - device and should somehow indicate its state. E.g. USB 2.0 - LED may react to device(s) in a USB 2.0 port(s). - Another common example is switch or router with multiple - Ethernet ports each of them having its own LED assigned - (assuming they are not hardwired). In such cases this - property should contain phandle(s) of related source - device(s). - In many cases LED can be related to more than one device - (e.g. one USB LED vs. multiple USB ports). Each source - should be represented by a node in the device tree and be - referenced by a phandle and a set of phandle arguments. A - length of arguments should be specified by the - #trigger-source-cells property in the source node. - -Required properties for flash LED child nodes: -- flash-max-microamp : Maximum flash LED supply current in microamperes. -- flash-max-timeout-us : Maximum timeout in microseconds after which the flash - LED is turned off. - -For controllers that have no configurable current the flash-max-microamp -property can be omitted. -For controllers that have no configurable timeout the flash-max-timeout-us -property can be omitted. - -* Trigger source providers - -Each trigger source should be represented by a device tree node. It may be e.g. -a USB port or an Ethernet device. - -Required properties for trigger source: -- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for - nodes of simple trigger sources (e.g. a specific USB - port). - -* Examples - -#include <dt-bindings/leds/common.h> - -led-controller@0 { - compatible = "gpio-leds"; - - led0 { - function = LED_FUNCTION_STATUS; - linux,default-trigger = "heartbeat"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - - led1 { - function = LED_FUNCTION_USB; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - }; -}; - -led-controller@0 { - compatible = "maxim,max77693-led"; - - led { - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - led-sources = <0>, <1>; - led-max-microamp = <50000>; - flash-max-microamp = <320000>; - flash-max-timeout-us = <500000>; - }; -}; - -led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; -}; +This file has moved to ./common.yaml. diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml new file mode 100644 index 000000000000..d97d099b87e5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common leds properties + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + LED and flash LED devices provide the same basic functionality as current + regulators, but extended with LED and flash LED specific features like + blinking patterns, flash timeout, flash faults and external flash strobe mode. + + Many LED devices expose more than one current output that can be connected + to one or more discrete LED component. Since the arrangement of connections + can influence the way of the LED device initialization, the LED components + have to be tightly coupled with the LED device binding. They are represented + by child nodes of the parent LED device binding. + +properties: + led-sources: + description: + List of device current outputs the LED is connected to. The outputs are + identified by the numbers that must be defined in the LED device binding + documentation. + $ref: /schemas/types.yaml#definitions/uint32-array + + function: + description: + LED function. Use one of the LED_FUNCTION_* prefixed definitions + from the header include/dt-bindings/leds/common.h. If there is no + matching LED_FUNCTION available, add a new one. + $ref: /schemas/types.yaml#definitions/string + + color: + description: + Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from + the header include/dt-bindings/leds/common.h. If there is no matching + LED_COLOR_ID available, add a new one. + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + minimum: 0 + maximum: 8 + + function-enumerator: + description: + Integer to be used when more than one instance of the same function is + needed, differing only with an ordinal number. + $ref: /schemas/types.yaml#definitions/uint32 + + label: + description: + The label for this LED. If omitted, the label is taken from the node name + (excluding the unit address). It has to uniquely identify a device, i.e. + no other LED class device can be assigned the same label. This property is + deprecated - use 'function' and 'color' properties instead. + function-enumerator has no effect when this property is present. + + default-state: + description: + The initial state of the LED. If the LED is already on or off and the + default-state property is set the to same value, then no glitch should be + produced where the LED momentarily turns off (or on). The "keep" setting + will keep the LED at whatever its current state is, without producing a + glitch. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - on + - off + - keep + default: off + + linux,default-trigger: + description: + This parameter, if present, is a string defining the trigger assigned to + the LED. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.txt) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + + led-pattern: + description: | + Array of integers with default pattern for certain triggers. + + Each trigger may parse this property differently: + - one-shot : two numbers specifying delay on and delay off (in ms), + - timer : two numbers specifying delay on and delay off (in ms), + - pattern : the pattern is given by a series of tuples, of + brightness and duration (in ms). The exact format is + described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + led-max-microamp: + description: + Maximum LED supply current in microamperes. This property can be made + mandatory for the board configurations introducing a risk of hardware + damage in case an excessive current is set. + For flash LED controllers with configurable current this property is + mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). + + panic-indicator: + description: + This property specifies that the LED should be used, if at all possible, + as a panic indicator. + type: boolean + + trigger-sources: + description: | + List of devices which should be used as a source triggering this LED + activity. Some LEDs can be related to a specific device and should somehow + indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0 + port(s). + Another common example is switch or router with multiple Ethernet ports + each of them having its own LED assigned (assuming they are not + hardwired). In such cases this property should contain phandle(s) of + related source device(s). + In many cases LED can be related to more than one device (e.g. one USB LED + vs. multiple USB ports). Each source should be represented by a node in + the device tree and be referenced by a phandle and a set of phandle + arguments. A length of arguments should be specified by the + #trigger-source-cells property in the source node. + $ref: /schemas/types.yaml#definitions/phandle-array + + # Required properties for flash LED child nodes: + flash-max-microamp: + description: + Maximum flash LED supply current in microamperes. Required for flash LED + nodes with configurable current. + + flash-max-timeout-us: + description: + Maximum timeout in microseconds after which the flash LED is turned off. + Required for flash LED nodes with configurable timeout. + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "gpio-leds"; + + led0 { + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + led1 { + function = LED_FUNCTION_USB; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + }; + }; + + led-controller@0 { + compatible = "maxim,max77693-led"; + reg = <0 0x100>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt index 21882c8d4b0c..83ff1b4d70a6 100644 --- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -8,7 +8,7 @@ Required properties: - compatible: should be "ir-spi-led". Optional properties: - - duty-cycle: 8 bit balue that represents the percentage of one period + - duty-cycle: 8 bit value that represents the percentage of one period in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. - led-active-low: boolean value that specifies whether the output is negated with a NOT gate. diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt deleted file mode 100644 index d21281b63d38..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ /dev/null @@ -1,75 +0,0 @@ -LEDs connected to GPIO lines - -Required properties: -- compatible : should be "gpio-leds". - -Each LED is represented as a sub-node of the gpio-leds device. Each -node's name represents the name of the corresponding LED. - -LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be - indicated using flags in the GPIO specifier. -- function : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- color : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- label : (optional) - see Documentation/devicetree/bindings/leds/common.txt (deprecated) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- default-state: (optional) The initial state of the LED. - see Documentation/devicetree/bindings/leds/common.txt -- retain-state-suspended: (optional) The suspend state can be retained.Such - as charge-led gpio. -- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. - Useful in BMC systems, for example when the BMC is rebooted while the host - remains up. -- panic-indicator : (optional) - see Documentation/devicetree/bindings/leds/common.txt - -Examples: - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -leds { - compatible = "gpio-leds"; - led0 { - gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - function = LED_FUNCTION_DISK; - }; - - led1 { - gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; - /* Keep LED on if BIOS detected hardware fault */ - default-state = "keep"; - function = LED_FUNCTION_FAULT; - }; -}; - -run-control { - compatible = "gpio-leds"; - led0 { - gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - default-state = "off"; - }; - led1 { - gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - default-state = "on"; - }; -}; - -leds { - compatible = "gpio-leds"; - - led0 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "max8903-charger-charging"; - retain-state-suspended; - function = LED_FUNCTION_CHARGE; - }; -}; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml new file mode 100644 index 000000000000..0e75b185dd19 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to GPIO lines + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each LED is represented as a sub-node of the gpio-leds device. Each + node's name represents the name of the corresponding LED. + +properties: + compatible: + const: gpio-leds + +patternProperties: + # The first form is preferred, but fall back to just 'led' anywhere in the + # node name to at least catch some child nodes. + "(^led-[0-9a-f]$|led)": + type: object + + allOf: + - $ref: common.yaml# + + properties: + gpios: + maxItems: 1 + + retain-state-suspended: + description: + The suspend state can be retained.Such as charge-led gpio. + type: boolean + + retain-state-shutdown: + description: + Retain the state of the LED on shutdown. Useful in BMC systems, for + example when the BMC is rebooted while the host remains up. + type: boolean + + required: + - gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + function = LED_FUNCTION_DISK; + }; + + led-1 { + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + function = LED_FUNCTION_FAULT; + }; + }; + + run-control { + compatible = "gpio-leds"; + led-0 { + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + led-1 { + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt index 4c2d923f8758..501468aa4d38 100644 --- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -18,6 +18,10 @@ Required properties: Optional properties: - enable-gpios : gpio pin to enable/disable the device. - vled-supply : LED supply + - ti,ovp-microvolt: Overvoltage protection in + micro-volt, can be 17000000, 21000000, 25000000 or + 29000000. If ti,ovp-microvolt is not specified it + defaults to 29000000. Required child properties: - reg : 0 - Will enable all LED sync paths @@ -31,6 +35,8 @@ Optional child properties: - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - linux,default-trigger : see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : + see Documentation/devicetree/bindings/leds/common.txt Example: @@ -44,12 +50,14 @@ led-controller@36 { enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + ti,ovp-microvolt = <29000000>; led@0 { reg = <0>; function = LED_FUNCTION_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; linux,default-trigger = "backlight"; + led-max-microamp = <20000>; }; } diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml new file mode 100644 index 000000000000..b50f4bcc98f1 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit LED driver + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The LED controller is represented as a sub-node of the PMIC node on the device + tree. + + The device has two LED outputs referred as GRNLED and AMBLED in data-sheet. + +select: false + +properties: + compatible: + const: rohm,bd71828-leds + +patternProperties: + "^led-[1-2]$": + type: object + description: + Properties for a single LED. + properties: + #allOf: + #- $ref: "common.yaml#" + rohm,led-compatible: + description: LED identification string + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - bd71828-ambled + - bd71828-grnled + function: + description: + Purpose of LED as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/string" + color: + description: + LED colour as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/uint32" + +required: + - compatible diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml new file mode 100644 index 000000000000..0618003e40bd --- /dev/null +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/trigger-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trigger source providers + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each trigger source provider should be represented by a device tree node. It + may be e.g. a USB port or an Ethernet device. + +properties: + '#trigger-source-cells': + description: + Number of cells in a source trigger. Typically 0 for nodes of simple + trigger sources (e.g. a specific USB port). + enum: [ 0, 1 ] + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 0f6374ceaa69..9af873b43acd 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -16,7 +16,15 @@ description: |- properties: compatible: - const: allwinner,sun7i-a20-csi0 + oneOf: + - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi0 + - items: + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 + - items: + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1 @@ -25,12 +33,16 @@ properties: maxItems: 1 clocks: + minItems: 2 + maxItems: 3 items: - description: The CSI interface clock - description: The CSI ISP clock - description: The CSI DRAM clock clock-names: + minItems: 2 + maxItems: 3 items: - const: bus - const: isp diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml new file mode 100644 index 000000000000..526593c8c614 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Video Engine Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-video-engine + - allwinner,sun5i-a13-video-engine + - allwinner,sun7i-a20-video-engine + - allwinner,sun8i-a33-video-engine + - allwinner,sun8i-h3-video-engine + - allwinner,sun50i-a64-video-engine + - allwinner,sun50i-h5-video-engine + - allwinner,sun50i-h6-video-engine + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: RAM Clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + allwinner,sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to the device SRAM + + memory-region: + description: + CMA pool to use for buffers allocation instead of the default + CMA pool. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - allwinner,sram + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun7i-a20-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + video-codec@1c0e000 { + compatible = "allwinner,sun7i-a20-video-engine"; + reg = <0x01c0e000 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + allwinner,sram = <&ve_sram 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml new file mode 100644 index 000000000000..1fd9b5532a21 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-csi + - allwinner,sun8i-a83t-csi + - allwinner,sun8i-h3-csi + - allwinner,sun8i-v3s-csi + - allwinner,sun50i-a64-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: DRAM Clock + + clock-names: + items: + - const: bus + - const: mod + - const: ram + + resets: + maxItems: 1 + + # See ./video-interfaces.txt for details + port: + type: object + + properties: + endpoint: + type: object + + properties: + remote-endpoint: true + + bus-width: + enum: [ 8, 10, 12, 16 ] + + pclk-sample: true + hsync-active: true + vsync-active: true + + required: + - bus-width + - remote-endpoint + + required: + - endpoint + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + csi1: csi@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", + "mod", + "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* + * If hsync-active/vsync-active are missing, + * embedded BT.656 sync is used. + */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml new file mode 100644 index 000000000000..335717e15970 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Video Decoder + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Maxime Jourdan <mjourdan@baylibre.com> + +description: | + The video decoding IP lies within the DOS memory region, + except for the hardware bitstream parser that makes use of an undocumented + region. + + It makes use of the following blocks: + - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks + then feed from this VIFIFO. + - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. + - VDEC_HEVC can decode HEVC and VP9. + + Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run + concurrently. + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec + - enum: + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: vdec + - const: esparser + + reg: + minItems: 2 + + reg-names: + items: + - const: dos + - const: esparser + + resets: + maxItems: 1 + + reset-names: + items: + - const: esparser + + clocks: + minItems: 4 + maxItems: 5 + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dos_parser + - const: dos + - const: vdec_1 + - const: vdec_hevc + - const: vdec_hevcf + + amlogic,ao-sysctrl: + description: should point to the AOBUS sysctrl node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + amlogic,canvas: + description: should point to a canvas provider node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,gx-vdec + + then: + properties: + clock-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-vdec + - amlogic,sm1-vdec + + then: + properties: + clock-names: + minItems: 5 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - amlogic,ao-sysctrl + - amlogic,canvas + +examples: + - | + vdec: video-decoder@c8820000 { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>; + reg-names = "dos", "esparser"; + interrupts = <44>, <32>; + interrupt-names = "vdec", "esparser"; + clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset_parser>; + reset-names = "esparser"; + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt deleted file mode 100644 index 9b6aace86ca7..000000000000 --- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt +++ /dev/null @@ -1,72 +0,0 @@ -Amlogic Video Decoder -================================ - -The video decoding IP lies within the DOS memory region, -except for the hardware bitstream parser that makes use of an undocumented -region. - -It makes use of the following blocks: - -- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks -then feed from this VIFIFO. -- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. -- VDEC_HEVC can decode HEVC and VP9. - -Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run -concurrently. - -Device Tree Bindings: ---------------------- - -VDEC: Video Decoder --------------------------- - -Required properties: -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,gxbb-vdec" - - GXL (S905X, S905D) : "amlogic,gxl-vdec" - - GXM (S912) : "amlogic,gxm-vdec" - followed by the common "amlogic,gx-vdec" -- reg: base address and size of he following memory-mapped regions : - - dos - - esparser -- reg-names: should contain the names of the previous memory regions -- interrupts: should contain the following IRQs: - - vdec - - esparser -- interrupt-names: should contain the names of the previous interrupts -- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node -- amlogic,canvas: should point to a canvas provider node -- clocks: should contain the following clocks : - - dos_parser - - dos - - vdec_1 - - vdec_hevc -- clock-names: should contain the names of the previous clocks -- resets: should contain the parser reset -- reset-names: should be "esparser" - -Example: - -vdec: video-codec@c8820000 { - compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; - reg = <0x0 0xc8820000 0x0 0x10000>, - <0x0 0xc110a580 0x0 0xe4>; - reg-names = "dos", "esparser"; - - interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&sysctrl_AO>; - amlogic,canvas = <&canvas>; - - clocks = <&clkc CLKID_DOS_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>; - clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; - - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; -}; diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt deleted file mode 100644 index 20c82fb0c343..000000000000 --- a/Documentation/devicetree/bindings/media/cedrus.txt +++ /dev/null @@ -1,57 +0,0 @@ -Device-tree bindings for the VPU found in Allwinner SoCs, referred to as the -Video Engine (VE) in Allwinner literature. - -The VPU can only access the first 256 MiB of DRAM, that are DMA-mapped starting -from the DRAM base. This requires specific memory allocation and handling. - -Required properties: -- compatible : must be one of the following compatibles: - - "allwinner,sun4i-a10-video-engine" - - "allwinner,sun5i-a13-video-engine" - - "allwinner,sun7i-a20-video-engine" - - "allwinner,sun8i-a33-video-engine" - - "allwinner,sun8i-h3-video-engine" - - "allwinner,sun50i-a64-video-engine" - - "allwinner,sun50i-h5-video-engine" - - "allwinner,sun50i-h6-video-engine" -- reg : register base and length of VE; -- clocks : list of clock specifiers, corresponding to entries in - the clock-names property; -- clock-names : should contain "ahb", "mod" and "ram" entries; -- resets : phandle for reset; -- interrupts : VE interrupt number; -- allwinner,sram : SRAM region to use with the VE. - -Optional properties: -- memory-region : CMA pool to use for buffers allocation instead of the - default CMA pool. - -Example: - -reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: default-pool { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; - reusable; - linux,cma-default; - }; -}; - -video-codec@1c0e000 { - compatible = "allwinner,sun7i-a20-video-engine"; - reg = <0x01c0e000 0x1000>; - - clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, - <&ccu CLK_DRAM_VE>; - clock-names = "ahb", "mod", "ram"; - - resets = <&ccu RST_VE>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - allwinner,sram = <&ve_sram 1>; -}; diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt index 38941db23dd2..ce9a22689e53 100644 --- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt +++ b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt @@ -1,4 +1,4 @@ -Samsung S5P/EXYNOS SoC series JPEG codec +Samsung S5P/Exynos SoC series JPEG codec Required properties: diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index bc963a6d305a..1872688fa408 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -1,6 +1,6 @@ * Samsung Exynos5 G-Scaler device -G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. +G-Scaler is used for scaling and color space conversion on Exynos5 SoCs. Required properties: - compatible: should be one of diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt index 13ebc0fac9ea..ca4cf774662e 100644 --- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt +++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt @@ -1,7 +1,8 @@ Device-Tree bindings for hix5hd2 ir IP Required properties: - - compatible: Should contain "hisilicon,hix5hd2-ir". + - compatible: Should contain "hisilicon,hix5hd2-ir", or: + - "hisilicon,hi3796cv300-ir" for Hi3796CV300 IR device. - reg: Base physical address of the controller and length of memory mapped region. - interrupts: interrupt-specifier for the sole interrupt generated by diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt deleted file mode 100644 index 3e2a2652eb19..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,ceu.txt +++ /dev/null @@ -1,86 +0,0 @@ -Renesas Capture Engine Unit (CEU) ----------------------------------------------- - -The Capture Engine Unit is the image capture interface found in the Renesas -SH Mobile, R-Mobile and RZ SoCs. - -The interface supports a single parallel input with data bus width of 8 or 16 -bits. - -Required properties: -- compatible: Shall be one of the following values: - "renesas,r7s72100-ceu" for CEU units found in RZ/A1H and RZ/A1M SoCs - "renesas,r8a7740-ceu" for CEU units found in R-Mobile A1 R8A7740 SoCs -- reg: Registers address base and size. -- interrupts: The interrupt specifier. - -The CEU supports a single parallel input and should contain a single 'port' -subnode with a single 'endpoint'. Connection to input devices are modeled -according to the video interfaces OF bindings specified in: -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - -Optional endpoint properties applicable to parallel input bus described in -the above mentioned "video-interfaces.txt" file are supported. - -- hsync-active: See [1] for description. If property is not present, - default is active high. -- vsync-active: See [1] for description. If property is not present, - default is active high. -- bus-width: See [1] for description. Accepted values are '8' and '16'. - If property is not present, default is '8'. -- field-even-active: See [1] for description. If property is not present, - an even field is identified by a logic 0 (active-low signal). - -Example: - -The example describes the connection between the Capture Engine Unit and an -OV7670 image sensor connected to i2c1 interface. - -ceu: ceu@e8210000 { - reg = <0xe8210000 0x209c>; - compatible = "renesas,r7s72100-ceu"; - interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&vio_pins>; - - status = "okay"; - - port { - ceu_in: endpoint { - remote-endpoint = <&ov7670_out>; - - hsync-active = <1>; - vsync-active = <0>; - }; - }; -}; - -i2c1: i2c@fcfee400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - - clock-frequency = <100000>; - - ov7670: camera@21 { - compatible = "ovti,ov7670"; - reg = <0x21>; - - pinctrl-names = "default"; - pinctrl-0 = <&vio_pins>; - - reset-gpios = <&port3 11 GPIO_ACTIVE_LOW>; - powerdown-gpios = <&port3 12 GPIO_ACTIVE_HIGH>; - - port { - ov7670_out: endpoint { - remote-endpoint = <&ceu_in>; - - hsync-active = <1>; - vsync-active = <0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml new file mode 100644 index 000000000000..8e9251a0f9ef --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,ceu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Capture Engine Unit (CEU) Bindings + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - linux-renesas-soc@vger.kernel.org + +description: |+ + The Capture Engine Unit is the image capture interface found in the Renesas SH + Mobile, R-Mobile and RZ SoCs. The interface supports a single parallel input + with data bus width of 8 or 16 bits. + +properties: + compatible: + enum: + - renesas,r7s72100-ceu + - renesas,r8a7740-ceu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + port: + type: object + additionalProperties: false + + properties: + endpoint: + type: object + additionalProperties: false + + # Properties described in + # Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 + + required: + - remote-endpoint + + required: + - endpoint + +required: + - compatible + - reg + - interrupts + - port + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ceu: ceu@e8210000 { + reg = <0xe8210000 0x209c>; + compatible = "renesas,r7s72100-ceu"; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + + port { + ceu_in: endpoint { + remote-endpoint = <&ov7670_out>; + hsync-active = <1>; + vsync-active = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.txt b/Documentation/devicetree/bindings/media/renesas,csi2.txt deleted file mode 100644 index 2da6f60b2b56..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,csi2.txt +++ /dev/null @@ -1,107 +0,0 @@ -Renesas R-Car MIPI CSI-2 ------------------------- - -The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the -Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the -R-Car VIN module, which provides the video capture capabilities. - -Mandatory properties --------------------- - - compatible: Must be one or more of the following - - "renesas,r8a774a1-csi2" for the R8A774A1 device. - - "renesas,r8a774b1-csi2" for the R8A774B1 device. - - "renesas,r8a774c0-csi2" for the R8A774C0 device. - - "renesas,r8a7795-csi2" for the R8A7795 device. - - "renesas,r8a7796-csi2" for the R8A7796 device. - - "renesas,r8a77965-csi2" for the R8A77965 device. - - "renesas,r8a77970-csi2" for the R8A77970 device. - - "renesas,r8a77980-csi2" for the R8A77980 device. - - "renesas,r8a77990-csi2" for the R8A77990 device. - - - reg: the register base and size for the device registers - - interrupts: the interrupt for the device - - clocks: A phandle + clock specifier for the module clock - - resets: A phandle + reset specifier for the module reset - -The device node shall contain two 'port' child nodes according to the -bindings defined in Documentation/devicetree/bindings/media/ -video-interfaces.txt. port@0 shall connect to the CSI-2 source. port@1 -shall connect to all the R-Car VIN modules that have a hardware -connection to the CSI-2 receiver. - -- port@0- Video source (mandatory) - - endpoint@0 - sub-node describing the endpoint that is the video source - -- port@1 - VIN instances (optional) - - One endpoint sub-node for every R-Car VIN instance which is connected - to the R-Car CSI-2 receiver. - -Example: - - csi20: csi2@fea80000 { - compatible = "renesas,r8a7796-csi2"; - reg = <0 0xfea80000 0 0x10000>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 714>; - power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 714>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <0>; - - csi20_in: endpoint@0 { - reg = <0>; - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&adv7482_txb>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi20vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi20>; - }; - csi20vin1: endpoint@1 { - reg = <1>; - remote-endpoint = <&vin1csi20>; - }; - csi20vin2: endpoint@2 { - reg = <2>; - remote-endpoint = <&vin2csi20>; - }; - csi20vin3: endpoint@3 { - reg = <3>; - remote-endpoint = <&vin3csi20>; - }; - csi20vin4: endpoint@4 { - reg = <4>; - remote-endpoint = <&vin4csi20>; - }; - csi20vin5: endpoint@5 { - reg = <5>; - remote-endpoint = <&vin5csi20>; - }; - csi20vin6: endpoint@6 { - reg = <6>; - remote-endpoint = <&vin6csi20>; - }; - csi20vin7: endpoint@7 { - reg = <7>; - remote-endpoint = <&vin7csi20>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml new file mode 100644 index 000000000000..408442a0c389 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car MIPI CSI-2 receiver + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the + Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the + R-Car VIN module, which provides the video capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-csi2 # RZ/G2M + - renesas,r8a774b1-csi2 # RZ/G2N + - renesas,r8a774c0-csi2 # RZ/G2E + - renesas,r8a7795-csi2 # R-Car H3 + - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77965-csi2 # R-Car M3-N + - renesas,r8a77970-csi2 # R-Car V3M + - renesas,r8a77980-csi2 # R-Car V3H + - renesas,r8a77990-csi2 # R-Car E3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + type: object + description: + A node containing input and output port nodes with endpoint definitions + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + port@0: + type: object + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + remote-endpoint: true + + required: + - clock-lanes + - data-lanes + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + port@1: + type: object + description: + Output port node, multiple endpoints describing all the R-Car VIN + modules connected the CSI-2 receiver. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 1 + + patternProperties: + "^endpoint@[0-9a-f]$": + type: object + + properties: + reg: + maxItems: 1 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7796-sysc.h> + + csi20: csi2@fea80000 { + compatible = "renesas,r8a7796-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 714>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi20_in: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&adv7482_txb>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt index e30b0d4eefdd..5eefd62ac5c5 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ b/Documentation/devicetree/bindings/media/renesas,vin.txt @@ -13,6 +13,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - "renesas,vin-r8a7743" for the R8A7743 device - "renesas,vin-r8a7744" for the R8A7744 device - "renesas,vin-r8a7745" for the R8A7745 device + - "renesas,vin-r8a77470" for the R8A77470 device - "renesas,vin-r8a774a1" for the R8A774A1 device - "renesas,vin-r8a774b1" for the R8A774B1 device - "renesas,vin-r8a774c0" for the R8A774C0 device @@ -41,9 +42,6 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - interrupts: the interrupt for the device - clocks: Reference to the parent clock -Additionally, an alias named vinX will need to be created to specify -which video input device this is. - The per-board settings for Gen2 and RZ/G1 platforms: - port - sub-node describing a single endpoint connected to the VIN diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 48c599dacbdf..f91b9dc80eb3 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -1,4 +1,4 @@ -Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC) +Samsung S5P/Exynos SoC Camera Subsystem (FIMC) ---------------------------------------------- The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt index be45f0b1a449..a4149c9434ea 100644 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt @@ -1,4 +1,4 @@ -Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS) +Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) ------------------------------------------------------------- Required properties: diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt deleted file mode 100644 index a2e3e56f0257..000000000000 --- a/Documentation/devicetree/bindings/media/sun6i-csi.txt +++ /dev/null @@ -1,61 +0,0 @@ -Allwinner V3s Camera Sensor Interface -------------------------------------- - -Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. - -Required properties: - - compatible: value must be one of: - * "allwinner,sun6i-a31-csi" - * "allwinner,sun8i-a83t-csi" - * "allwinner,sun8i-h3-csi" - * "allwinner,sun8i-v3s-csi" - * "allwinner,sun50i-a64-csi" - - reg: base address and size of the memory-mapped region. - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the CSI - * bus: the CSI interface clock - * mod: the CSI module clock - * ram: the CSI DRAM clock - - clock-names: the clock names mentioned above - - resets: phandles to the reset line driving the CSI - -The CSI node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Endpoint node properties for CSI ---------------------------------- -See the video-interfaces.txt for a detailed description of these properties. -- remote-endpoint : (required) a phandle to the bus receiver's endpoint - node -- bus-width: : (required) must be 8, 10, 12 or 16 -- pclk-sample : (optional) (default: sample on falling edge) -- hsync-active : (required; parallel-only) -- vsync-active : (required; parallel-only) - -Example: - -csi1: csi@1cb4000 { - compatible = "allwinner,sun8i-v3s-csi"; - reg = <0x01cb4000 0x1000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_CSI>, - <&ccu CLK_CSI1_SCLK>, - <&ccu CLK_DRAM_CSI>; - clock-names = "bus", "mod", "ram"; - resets = <&ccu RST_BUS_CSI>; - - port { - /* Parallel bus endpoint */ - csi1_ep: endpoint { - remote-endpoint = <&adv7611_ep>; - bus-width = <16>; - - /* If hsync-active/vsync-active are missing, - embedded BT.656 sync is used */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - pclk-sample = <1>; /* Rising */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml new file mode 100644 index 000000000000..1ea784179536 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,cal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings + +maintainers: + - Benoit Parrot <bparrot@ti.com> + +description: |- + The Camera Adaptation Layer (CAL) is a key component for image capture + applications. The capture module provides the system interface and the + processing capability to connect CSI2 image-sensor modules to the + DRA72x device. + + CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes + should contain a 'port' child node with child 'endpoint' node. Please + refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +properties: + compatible: + enum: + # for DRA72 controllers + - ti,dra72-cal + # for DRA72 controllers pre ES2.0 + - ti,dra72-pre-es2-cal + # for DRA76 controllers + - ti,dra76-cal + # for AM654 controllers + - ti,am654-cal + + reg: + minItems: 2 + items: + - description: The CAL main register region + - description: The RX Core0 (DPHY0) register region + - description: The RX Core1 (DPHY1) register region + + reg-names: + minItems: 2 + items: + - const: cal_top + - const: cal_rx_core0 + - const: cal_rx_core1 + + interrupts: + maxItems: 1 + + ti,camerrx-control: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + phandle to the device control module and offset to the + control_camerarx_core register + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + maxItems: 1 + + # See ./video-interfaces.txt for details + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + properties: + reg: + const: 0 + description: CSI2 Port #0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + properties: + reg: + const: 1 + description: CSI2 Port #1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + +required: + - compatible + - reg + - reg-names + - interrupts + - ti,camerrx-control + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cal: cal@4845b000 { + compatible = "ti,dra72-cal"; + reg = <0x4845B000 0x400>, + <0x4845B800 0x40>, + <0x4845B900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0xE94>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + + i2c5: i2c@4807c000 { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt deleted file mode 100644 index ae9b52f37576..000000000000 --- a/Documentation/devicetree/bindings/media/ti-cal.txt +++ /dev/null @@ -1,72 +0,0 @@ -Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) ------------------------------------------------------- - -The Camera Adaptation Layer (CAL) is a key component for image capture -applications. The capture module provides the system interface and the -processing capability to connect CSI2 image-sensor modules to the -DRA72x device. - -Required properties: -- compatible: must be "ti,dra72-cal" -- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX - control address space -- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control - registers -- interrupts: should contain IRQ line for the CAL; - -CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes -should contain a 'port' child node with child 'endpoint' node. Please -refer to the bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - cal: cal@4845b000 { - compatible = "ti,dra72-cal"; - ti,hwmods = "cal"; - reg = <0x4845B000 0x400>, - <0x4845B800 0x40>, - <0x4845B900 0x40>, - <0x4A002e94 0x4>; - reg-names = "cal_top", - "cal_rx_core0", - "cal_rx_core1", - "camerrx_control"; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - csi2_0: port@0 { - reg = <0>; - endpoint { - slave-mode; - remote-endpoint = <&ar0330_1>; - }; - }; - csi2_1: port@1 { - reg = <1>; - }; - }; - }; - - i2c5: i2c@4807c000 { - ar0330@10 { - compatible = "ti,ar0330"; - reg = <0x10>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ar0330_1: endpoint { - reg = <0>; - clock-lanes = <1>; - data-lanes = <0 2 3 4>; - remote-endpoint = <&csi2_0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index b6bc30d7777e..5c6eabeed341 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -1,7 +1,7 @@ * AB8500 Multi-Functional Device (MFD) Required parent device properties: -- compatible : contains "stericsson,ab8500"; +- compatible : contains "stericsson,ab8500" or "stericsson,ab8505"; - interrupts : contains the IRQ line for the AB8500 - interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) - #interrupt-cells : should be 2, for 2-cell format @@ -49,11 +49,13 @@ ab8500-charger : : vddadc : Charger interface : CH_WD_EXP : : Charger watchdog detected ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : -ab8500-gpio : : : GPIO Controller +ab8500-gpio : : : GPIO Controller (AB8500) +ab8505-gpio : : : GPIO Controller (AB8505) ab8500-ponkey : ONKEY_DBF : : Power-on Key ONKEY_DBR : : ab8500-pwm : : : Pulse Width Modulator -ab8500-regulator : : : Regulators +ab8500-regulator : : : Regulators (AB8500) +ab8505-regulator : : : Regulators (AB8505) ab8500-rtc : 60S : : Real Time Clock : ALARM : : ab8500-sysctrl : : : System Control diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml new file mode 100644 index 000000000000..d131759ccaf3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + compatible: + const: allwinner,sun6i-a31-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*_(clk|rst)$": + type: object + + properties: + compatible: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun6i-a31-apb0-clk + - allwinner,sun6i-a31-apb0-gates-clk + - allwinner,sun6i-a31-ar100-clk + - allwinner,sun6i-a31-clock-reset + - fixed-factor-clock + + allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-ar100-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming + order. + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun6i-a31-ccu.h> + + prcm@1f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&rtc 0>, <&osc24M>, + <&ccu CLK_PLL_PERIPH>, + <&ccu CLK_PLL_PERIPH>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&rtc 0>, <&osc24M>; + clock-output-names = "ir"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml new file mode 100644 index 000000000000..aa5e683b236c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + compatible: + const: allwinner,sun8i-a23-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*(clk|rst|codec).*$": + type: object + + properties: + compatible: + enum: + - fixed-factor-clock + - allwinner,sun8i-a23-apb0-clk + - allwinner,sun8i-a23-apb0-gates-clk + - allwinner,sun6i-a31-clock-reset + - allwinner,sun8i-a23-codec-analog + + required: + - compatible + + allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-codec-analog + + then: + properties: + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@1f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..a09133066aff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,13 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" - The compatible <chip> indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-usart" + - "atmel,at91sam9260-usart" + - "microchip,sam9x60-usart" + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" + - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index bc4b59de6a55..857af982c88f 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock da9062-onkey : : On Key da9062-watchdog : : Watchdog Timer da9062-thermal : : Thermal +da9062-gpio : : GPIOs The DA9061 PMIC consists of: @@ -38,6 +39,15 @@ Required properties: See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information on IRQ bindings. +Optional properties: + +- gpio-controller : Marks the device as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify the gpio polarity. + +See Documentation/devicetree/bindings/gpio/gpio.txt for further information on +GPIO bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs. diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt index fc6f0f4e8beb..92070b346756 100644 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ b/Documentation/devicetree/bindings/mfd/max14577.txt @@ -5,6 +5,8 @@ Battery Charger and SFOUT LDO output for powering USB devices. It is interfaced to host controller using I2C. MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. +For the description of Fuel Gauge low SOC alert interrupt see: +../power/supply/max17040_battery.txt Required properties: diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml new file mode 100644 index 000000000000..4fbb9e734284 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD71828GW is a single-chip power management IC for battery-powered portable + devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA + single-cell linear charger. Also included is a Coulomb counter, a real-time + clock (RTC), and a 32.768 kHz clock gate. + +properties: + compatible: + const: rohm,bd71828 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If some + other but 30MOhm resistor is used the resistance value should be given + here in Ohms. + + regulators: + $ref: ../regulator/rohm,bd71828-regulator.yaml + description: + List of child nodes that specify the regulators. + + leds: + $ref: ../leds/rohm,bd71828-leds.yaml + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71828"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71828-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <0 1>, <2 1>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + leds { + compatible = "rohm,bd71828-leds"; + + led-1 { + rohm,led-compatible = "bd71828-grnled"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + led-2 { + rohm,led-compatible = "bd71828-ambled"; + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_AMBER>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt deleted file mode 100644 index daa091c2e67b..000000000000 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device - -PRCM is an MFD device exposing several Power Management related devices -(like clks and reset controllers). - -Required properties: - - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm" - - reg: The PRCM registers range - -The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices - - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset - controller devices - - -Example: - - prcm: prcm@1f01400 { - compatible = "allwinner,sun6i-a31-prcm"; - reg = <0x01f01400 0x200>; - - /* Put subdevices here */ - ar100: ar100_clk { - compatible = "allwinner,sun6i-a31-ar100-clk"; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - }; - - ahb0: ahb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&ar100_div>; - clock-output-names = "ahb0"; - }; - - apb0: apb0_clk { - compatible = "allwinner,sun6i-a31-apb0-clk"; - #clock-cells = <0>; - clocks = <&ahb0>; - clock-output-names = "apb0"; - }; - - apb0_gates: apb0_gates_clk { - compatible = "allwinner,sun6i-a31-apb0-gates-clk"; - #clock-cells = <1>; - clocks = <&apb0>; - clock-output-names = "apb0_pio", "apb0_ir", - "apb0_timer01", "apb0_p2wi", - "apb0_uart", "apb0_1wire", - "apb0_i2c"; - }; - - apb0_rst: apb0_rst { - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt index 93602c7a19c8..dc448a9d5b4d 100644 --- a/Documentation/devicetree/bindings/mfd/tps6105x.txt +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -7,11 +7,56 @@ Required properties: - compatible: "ti,tps61050" or "ti,tps61052" - reg: Specifies the I2C slave address -Example: +Optional sub-node: + +This subnode selects the chip's operational mode. +There can be at most one single available subnode. + +- regulator: presence of this sub-node puts the chip in regulator mode. + see ../regulator/regulator.yaml + +- led: presence of this sub-node puts the chip in led mode. + Optional properties: + - function : see ../leds/common.txt + - color : see ../leds/common.txt + - label : see ../leds/common.txt + (deprecated) + +Example (GPIO operation only): + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; + +Example (GPIO + regulator operation): i2c0 { tps61052@33 { compatible = "ti,tps61052"; reg = <0x33>; + + regulator { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +Example (GPIO + led operation): + +#include <dt-bindings/leds/common.h> + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + led { + color = <LED_COLOR_ID_WHITE>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml new file mode 100644 index 000000000000..78dcf6ef3883 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/ingenic/devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic XBurst based Platforms Device Tree Bindings + +maintainers: + - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> +description: | + Devices with a Ingenic XBurst CPU shall have the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Qi Hardware Ben NanoNote + items: + - const: qi,lb60 + + - description: Game Consoles Worldwide GCW Zero + items: + - const: gcw,zero + + - description: MIPS Creator CI20 + items: + - const: img,ci20 + + - description: YSH & ATIL General Board CU Neo + items: + - const: yna,cu1000-neo +... diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index c93643fceabb..0f97d711444e 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -22,6 +22,7 @@ Required properties: "fsl,imx8mm-usdhc" "fsl,imx8mn-usdhc" "fsl,imx8mp-usdhc" + "fsl,imx8qm-usdhc" "fsl,imx8qxp-usdhc" Optional properties: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index b130450c3b34..3c0df4016a12 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -96,11 +96,10 @@ properties: description: When set, no physical write-protect line is present. This property should only be specified when the controller has a - dedicated write-protect detection logic. If a GPIO is always - used for the write-protect detection. If a GPIO is always used + dedicated write-protect detection logic. If a GPIO is always used for the write-protect detection logic, it is sufficient to not specify the wp-gpios property in the absence of a write-protect - line. + line. Not used in combination with eMMC or SDIO. wp-gpios: description: diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index b32aed1db46d..98916a84bbf6 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -14,6 +14,11 @@ Required properties: interface clock, and the ECC circuit clock. - clock-names: should contain "nand", "nand_x", "ecc" +Optional properties: + - resets: may contain phandles to the controller core reset, the register + reset + - reset-names: may contain "nand", "reg" + Sub-nodes: Sub-nodes represent available NAND chips. @@ -46,6 +51,8 @@ nand: nand@ff900000 { reg-names = "nand_data", "denali_reg"; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&nand_rst>, <&nand_reg_rst>; + reset-names = "nand", "reg"; interrupts = <0 144 4>; nand@0 { diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index 68b67d9db63a..999aceadb985 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -11,6 +11,7 @@ Required properties: - compatible: should contain one of the following: * "qcom,qca6174-bt" * "qcom,wcn3990-bt" + * "qcom,wcn3991-bt" * "qcom,wcn3998-bt" Optional properties for compatible string qcom,qca6174-bt: diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 5df4aa7f6811..87dad2dd8ca0 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -21,7 +21,8 @@ Required properties: - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC. - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a7796" for the R8A77960 SoC. + - "renesas,etheravb-r8a77961" for the R8A77961 SoC. - "renesas,etheravb-r8a77965" for the R8A77965 SoC. - "renesas,etheravb-r8a77970" for the R8A77970 SoC. - "renesas,etheravb-r8a77980" for the R8A77980 SoC. @@ -37,8 +38,8 @@ Required properties: - reg: Offset and length of (1) the register block and (2) the stream buffer. The region for the register block is mandatory. The region for the stream buffer is optional, as it is only present on - R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796), - and M3-N (R8A77965). + R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960), + M3-W+ (R8A77961), and M3-N (R8A77965). - interrupts: A list of interrupt-specifiers, one for each entry in interrupt-names. If interrupt-names is not present, an interrupt specifier diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt deleted file mode 100644 index 142a51d5a9be..000000000000 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt +++ /dev/null @@ -1,31 +0,0 @@ -STMicroelectronics STM32 Factory-programmed data device tree bindings - -This represents STM32 Factory-programmed read only non-volatile area: locked -flash, OTP, read-only HW regs... This contains various information such as: -analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2), -internal vref (VREFIN_CAL), unique device ID... - -Required properties: -- compatible: Should be one of: - "st,stm32f4-otp" - "st,stm32mp15-bsec" -- reg: Offset and length of factory-programmed area. -- #address-cells: Should be '<1>'. -- #size-cells: Should be '<1>'. - -Optional Data cells: -- Must be child nodes as described in nvmem.txt. - -Example on stm32f4: - romem: nvmem@1fff7800 { - compatible = "st,stm32f4-otp"; - reg = <0x1fff7800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells: ts_cal1 at 0x1fff7a2c */ - ts_cal1: calib@22c { - reg = <0x22c 0x2>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml new file mode 100644 index 000000000000..d84deb4774a4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Factory-programmed data bindings + +description: | + This represents STM32 Factory-programmed read only non-volatile area: locked + flash, OTP, read-only HW regs... This contains various information such as: + analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2), + internal vref (VREFIN_CAL), unique device ID... + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - st,stm32f4-otp + - st,stm32mp15-bsec + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +examples: + - | + efuse@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + calib@22c { + reg = <0x22c 0x2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml new file mode 100644 index 000000000000..aef87a33a7c9 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 CPU OPP Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + For some SoCs, the CPU frequency subset and voltage value of each + OPP varies based on the silicon variant in use. Allwinner Process + Voltage Scaling Tables defines the voltage and frequency value based + on the speedbin blown in the efuse combination. The + sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to + provide the OPP framework with required information. + +properties: + compatible: + const: allwinner,sun50i-h6-operating-points + + nvmem-cells: + description: | + A phandle pointing to a nvmem-cells node representing the efuse + registers that has information about the speedbin that is used + to select the right frequency/voltage value pair. Please refer + the for nvmem-cells bindings + Documentation/devicetree/bindings/nvmem/nvmem.txt and also + examples below. + +required: + - compatible + - nvmem-cells + +patternProperties: + "opp-[0-9]+": + type: object + + properties: + opp-hz: true + + patternProperties: + "opp-microvolt-.*": true + + required: + - opp-hz + - opp-microvolt-speed0 + - opp-microvolt-speed1 + - opp-microvolt-speed2 + + unevaluatedProperties: false + +unevaluatedProperties: false + +examples: + - | + cpu_opp_table: opp-table { + compatible = "allwinner,sun50i-h6-operating-points"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-480000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <480000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-720000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <720000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-816000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <816000000>; + + opp-microvolt-speed0 = <880000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-888000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <888000000>; + + opp-microvolt-speed0 = <940000>; + opp-microvolt-speed1 = <820000>; + opp-microvolt-speed2 = <800000>; + }; + + opp-1080000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1080000000>; + + opp-microvolt-speed0 = <1060000>; + opp-microvolt-speed1 = <880000>; + opp-microvolt-speed2 = <840000>; + }; + + opp-1320000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1320000000>; + + opp-microvolt-speed0 = <1160000>; + opp-microvolt-speed1 = <940000>; + opp-microvolt-speed2 = <900000>; + }; + + opp-1488000000 { + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-hz = /bits/ 64 <1488000000>; + + opp-microvolt-speed0 = <1160000>; + opp-microvolt-speed1 = <1000000>; + opp-microvolt-speed2 = <960000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt deleted file mode 100644 index 7deae57a587b..000000000000 --- a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt +++ /dev/null @@ -1,167 +0,0 @@ -Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings -=================================== - -For some SoCs, the CPU frequency subset and voltage value of each OPP -varies based on the silicon variant in use. Allwinner Process Voltage -Scaling Tables defines the voltage and frequency value based on the -speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver -reads the efuse value from the SoC to provide the OPP framework with -required information. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'allwinner,sun50i-h6-operating-points'. -- nvmem-cells: A phandle pointing to a nvmem-cells node representing the - efuse registers that has information about the speedbin - that is used to select the right frequency/voltage value - pair. Please refer the for nvmem-cells bindings - Documentation/devicetree/bindings/nvmem/nvmem.txt and - also examples below. - -In every OPP node: -- opp-microvolt-<name>: Voltage in micro Volts. - At runtime, the platform can pick a <name> and - matching opp-microvolt-<name> property. - [See: opp.txt] - HW: <name>: - sun50i-h6 speed0 speed1 speed2 - -Example 1: ---------- - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <1>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <2>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <3>; - enable-method = "psci"; - clocks = <&ccu CLK_CPUX>; - clock-latency-ns = <244144>; /* 8 32k periods */ - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - }; - }; - - cpu_opp_table: opp_table { - compatible = "allwinner,sun50i-h6-operating-points"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - opp@480000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <480000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@720000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <720000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@816000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <816000000>; - - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@888000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <888000000>; - - opp-microvolt-speed0 = <940000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; - - opp@1080000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1080000000>; - - opp-microvolt-speed0 = <1060000>; - opp-microvolt-speed1 = <880000>; - opp-microvolt-speed2 = <840000>; - }; - - opp@1320000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1320000000>; - - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <940000>; - opp-microvolt-speed2 = <900000>; - }; - - opp@1488000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1488000000>; - - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <1000000>; - opp-microvolt-speed2 = <960000>; - }; - }; -.... -soc { -.... - sid: sid@3006000 { - compatible = "allwinner,sun50i-h6-sid"; - reg = <0x03006000 0x400>; - #address-cells = <1>; - #size-cells = <1>; - .... - speedbin_efuse: speed@1c { - reg = <0x1c 4>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt deleted file mode 100644 index f7514c170a32..000000000000 --- a/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt +++ /dev/null @@ -1,10 +0,0 @@ -* ARM Juno R1 PCIe interface - -This PCIe host controller is based on PLDA XpressRICH3-AXI IP -and thus inherits all the common properties defined in plda,xpressrich3-axi.txt -as well as the base properties defined in host-generic-pci.txt. - -Required properties: - - compatible: "arm,juno-r1-pcie" - - dma-coherent: The host controller bridges the AXI transactions into PCIe bus - in a manner that makes the DMA operations to appear coherent to the CPUs. diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt deleted file mode 100644 index 515b2f9542e5..000000000000 --- a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Synopsys DesignWare PCIe root complex in ECAM shift mode - -In some cases, firmware may already have configured the Synopsys DesignWare -PCIe controller in RC mode with static ATU window mappings that cover all -config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion. -In this case, there is no need for the OS to perform any low level setup -of clocks, PHYs or device registers, nor is there any reason for the driver -to reconfigure ATU windows for config and/or IO space accesses at runtime. - -In cases where the IP was synthesized with a minimum ATU window size of -64 KB, it cannot be supported by the generic ECAM driver, because it -requires special config space accessors that filter accesses to device #1 -and beyond on the first bus. - -Required properties: -- compatible: "marvell,armada8k-pcie-ecam" or - "socionext,synquacer-pcie-ecam" or - "snps,dw-pcie-ecam" (must be preceded by a more specific match) - -Please refer to the binding document of "pci-host-ecam-generic" in the -file host-generic-pci.txt for a description of the remaining required -and optional properties. - -Example: - - pcie1: pcie@7f000000 { - compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; - device_type = "pci"; - reg = <0x0 0x7f000000 0x0 0xf00000>; - bus-range = <0x0 0xe>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>, - <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>, - <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; - - #interrupt-cells = <0x1>; - interrupt-map-mask = <0x0 0x0 0x0 0x0>; - interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>; - msi-map = <0x0 &its 0x0 0x10000>; - dma-coherent; - }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 0dcb87d6554f..d6796ef54ea1 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -41,45 +41,3 @@ Hip05 Example (note that Hip06 is the same except compatible): 0x0 0 0 3 &mbigen_pcie 3 12 0x0 0 0 4 &mbigen_pcie 4 13>; }; - -HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. - -Some BIOSes place the host controller in a mode where it is ECAM -compliant for all devices other than the root complex. In such cases, -the host controller should be described as below. - -The properties and their meanings are identical to those described in -host-generic-pci.txt except as listed below. - -Properties of the host controller node that differ from -host-generic-pci.txt: - -- compatible : Must be "hisilicon,hip06-pcie-ecam", or - "hisilicon,hip07-pcie-ecam" - -- reg : Two entries: First the ECAM configuration space for any - other bus underneath the root bus. Second, the base - and size of the HiSilicon host bridge registers include - the RC's own config space. - -Example: - pcie0: pcie@a0090000 { - compatible = "hisilicon,hip06-pcie-ecam"; - reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */ - <0 0xa0090000 0 0x10000>; /* host bridge registers */ - bus-range = <0 31>; - msi-map = <0x0000 &its_dsa 0x0000 0x2000>; - msi-map-mask = <0xffff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000 - 0x01000000 0 0 0 0xb7ff0000 0 0x10000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 - 0x0 0 0 2 &mbigen_pcie0 650 4 - 0x0 0 0 3 &mbigen_pcie0 650 4 - 0x0 0 0 4 &mbigen_pcie0 650 4>; - }; diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt deleted file mode 100644 index 614b594f4e72..000000000000 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ /dev/null @@ -1,101 +0,0 @@ -* Generic PCI host controller - -Firmware-initialised PCI host controllers and PCI emulations, such as the -virtio-pci implementations found in kvmtool and other para-virtualised -systems, do not require driver support for complexities such as regulator -and clock management. In fact, the controller may not even require the -configuration of a control interface by the operating system, instead -presenting a set of fixed windows describing a subset of IO, Memory and -Configuration Spaces. - -Such a controller can be described purely in terms of the standardized device -tree bindings communicated in pci.txt: - - -Properties of the host controller node: - -- compatible : Must be "pci-host-cam-generic" or "pci-host-ecam-generic" - depending on the layout of configuration space (CAM vs - ECAM respectively). - -- device_type : Must be "pci". - -- ranges : As described in IEEE Std 1275-1994, but must provide - at least a definition of non-prefetchable memory. One - or both of prefetchable Memory and IO Space may also - be provided. - -- bus-range : Optional property (also described in IEEE Std 1275-1994) - to indicate the range of bus numbers for this controller. - If absent, defaults to <0 255> (i.e. all buses). - -- #address-cells : Must be 3. - -- #size-cells : Must be 2. - -- reg : The Configuration Space base address and size, as accessed - from the parent bus. The base address corresponds to - the first bus in the "bus-range" property. If no - "bus-range" is specified, this will be bus 0 (the default). - -Properties of the /chosen node: - -- linux,pci-probe-only - : Optional property which takes a single-cell argument. - If '0', then Linux will assign devices in its usual manner, - otherwise it will not try to assign devices and instead use - them as they are configured already. - -Configuration Space is assumed to be memory-mapped (as opposed to being -accessed via an ioport) and laid out with a direct correspondence to the -geography of a PCI bus address by concatenating the various components to -form an offset. - -For CAM, this 24-bit offset is: - - cfg_offset(bus, device, function, register) = - bus << 16 | device << 11 | function << 8 | register - -While ECAM extends this by 4 bits to accommodate 4k of function space: - - cfg_offset(bus, device, function, register) = - bus << 20 | device << 15 | function << 12 | register - -Interrupt mapping is exactly as described in `Open Firmware Recommended -Practice: Interrupt Mapping' and requires the following properties: - -- #interrupt-cells : Must be 1 - -- interrupt-map : <see aforementioned specification> - -- interrupt-map-mask : <see aforementioned specification> - - -Example: - -pci { - compatible = "pci-host-cam-generic" - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x1>; - - // CPU_PHYSICAL(2) SIZE(2) - reg = <0x0 0x40000000 0x0 0x1000000>; - - // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) - ranges = <0x01000000 0x0 0x01000000 0x0 0x01000000 0x0 0x00010000>, - <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0x3f000000>; - - - #interrupt-cells = <0x1>; - - // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3) - interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1 - 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1 - 0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1 - 0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>; - - // PCI_DEVICE(3) INT#(1) - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; -} diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml new file mode 100644 index 000000000000..47353d0cd394 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic PCI host controller + +maintainers: + - Will Deacon <will@kernel.org> + +description: | + Firmware-initialised PCI host controllers and PCI emulations, such as the + virtio-pci implementations found in kvmtool and other para-virtualised + systems, do not require driver support for complexities such as regulator + and clock management. In fact, the controller may not even require the + configuration of a control interface by the operating system, instead + presenting a set of fixed windows describing a subset of IO, Memory and + Configuration Spaces. + + Configuration Space is assumed to be memory-mapped (as opposed to being + accessed via an ioport) and laid out with a direct correspondence to the + geography of a PCI bus address by concatenating the various components to + form an offset. + + For CAM, this 24-bit offset is: + + cfg_offset(bus, device, function, register) = + bus << 16 | device << 11 | function << 8 | register + + While ECAM extends this by 4 bits to accommodate 4k of function space: + + cfg_offset(bus, device, function, register) = + bus << 20 | device << 15 | function << 12 | register + +properties: + compatible: + description: Depends on the layout of configuration space (CAM vs ECAM + respectively). May also have more specific compatibles. + oneOf: + - description: + PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP + items: + - const: arm,juno-r1-pcie + - const: plda,xpressrich3-axi + - const: pci-host-ecam-generic + - description: | + ThunderX PCI host controller for pass-1.x silicon + + Firmware-initialized PCI host controller to on-chip devices found on + some Cavium ThunderX processors. These devices have ECAM-based config + access, but the BARs are all at fixed addresses. We handle the fixed + addresses by synthesizing Enhanced Allocation (EA) capabilities for + these devices. + const: cavium,pci-host-thunder-ecam + - description: + Cavium ThunderX PEM firmware-initialized PCIe host controller + const: cavium,pci-host-thunder-pem + - description: + HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some + firmware places the host controller in a mode where it is ECAM + compliant for all devices other than the root complex. + enum: + - hisilicon,hip06-pcie-ecam + - hisilicon,hip07-pcie-ecam + - description: | + In some cases, firmware may already have configured the Synopsys + DesignWare PCIe controller in RC mode with static ATU window mappings + that cover all config, MMIO and I/O spaces in a [mostly] ECAM + compatible fashion. In this case, there is no need for the OS to + perform any low level setup of clocks, PHYs or device registers, nor + is there any reason for the driver to reconfigure ATU windows for + config and/or IO space accesses at runtime. + + In cases where the IP was synthesized with a minimum ATU window size + of 64 KB, it cannot be supported by the generic ECAM driver, because + it requires special config space accessors that filter accesses to + device #1 and beyond on the first bus. + items: + - enum: + - marvell,armada8k-pcie-ecam + - socionext,synquacer-pcie-ecam + - const: snps,dw-pcie-ecam + - description: + CAM or ECAM compliant PCI host controllers without any quirks + enum: + - pci-host-cam-generic + - pci-host-ecam-generic + + reg: + description: + The Configuration Space base address and size, as accessed from the parent + bus. The base address corresponds to the first bus in the "bus-range" + property. If no "bus-range" is specified, this will be bus 0 (the + default). Some host controllers have a 2nd non-compliant address range, + so 2 entries are allowed. + minItems: 1 + maxItems: 2 + + ranges: + description: + As described in IEEE Std 1275-1994, but must provide at least a + definition of non-prefetchable memory. One or both of prefetchable Memory + and IO Space may also be provided. + minItems: 1 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - ranges + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + const: arm,juno-r1-pcie + then: + required: + - dma-coherent + + - if: + properties: + compatible: + not: + contains: + enum: + - cavium,pci-host-thunder-pem + - hisilicon,hip06-pcie-ecam + - hisilicon,hip07-pcie-ecam + then: + properties: + reg: + maxItems: 1 + +examples: + - | + + bus { + #address-cells = <2>; + #size-cells = <2>; + pcie@40000000 { + compatible = "pci-host-cam-generic"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0x1>; + + // CPU_PHYSICAL(2) SIZE(2) + reg = <0x0 0x40000000 0x0 0x1000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) + ranges = <0x01000000 0x0 0x01000000 0x0 0x01000000 0x0 0x00010000>, + <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0x3f000000>; + + #interrupt-cells = <0x1>; + + // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3) + interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1>, + < 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1>, + <0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1>, + <0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>; + + // PCI_DEVICE(3) INT#(1) + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml new file mode 100644 index 000000000000..db605d8a387d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe RC controller on Intel Gateway SoCs + +maintainers: + - Dilip Kota <eswara.kota@linux.intel.com> + +properties: + compatible: + items: + - const: intel,lgm-pcie + - const: snps,dw-pcie + + device_type: + const: pci + + "#address-cells": + const: 3 + + "#size-cells": + const: 2 + + reg: + items: + - description: Controller control and status registers. + - description: PCIe configuration registers. + - description: Controller application registers. + + reg-names: + items: + - const: dbi + - const: config + - const: app + + ranges: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie + + reset-gpios: + maxItems: 1 + + linux,pci-domain: true + + num-lanes: + maximum: 2 + description: Number of lanes to use for this port. + + '#interrupt-cells': + const: 1 + + interrupt-map-mask: + description: Standard PCI IRQ mapping properties. + + interrupt-map: + description: Standard PCI IRQ mapping properties. + + max-link-speed: + description: Specify PCI Gen for link capability. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 3, 4 ] + - default: 1 + + bus-range: + description: Range of bus numbers associated with this controller. + + reset-assert-ms: + description: | + Delay after asserting reset to the PCIe device. + maximum: 500 + default: 100 + +required: + - compatible + - device_type + - "#address-cells" + - "#size-cells" + - reg + - reg-names + - ranges + - resets + - clocks + - phys + - phy-names + - reset-gpios + - '#interrupt-cells' + - interrupt-map + - interrupt-map-mask + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/intel,lgm-clk.h> + pcie10: pcie@d0e00000 { + compatible = "intel,lgm-pcie", "snps,dw-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0xd0e00000 0x1000>, + <0xd2000000 0x800000>, + <0xd0a41000 0x1000>; + reg-names = "dbi", "config", "app"; + linux,pci-domain = <0>; + max-link-speed = <4>; + bus-range = <0x00 0x08>; + interrupt-parent = <&ioapic1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &ioapic1 27 1>, + <0 0 0 2 &ioapic1 28 1>, + <0 0 0 3 &ioapic1 29 1>, + <0 0 0 4 &ioapic1 30 1>; + ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>; + resets = <&rcu0 0x50 0>; + clocks = <&cgu0 LGM_GCLK_PCIE10>; + phys = <&cb0phy0>; + phy-names = "pcie"; + reset-assert-ms = <500>; + reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt deleted file mode 100644 index f478874b79ce..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt +++ /dev/null @@ -1,30 +0,0 @@ -* ThunderX PCI host controller for pass-1.x silicon - -Firmware-initialized PCI host controller to on-chip devices found on -some Cavium ThunderX processors. These devices have ECAM-based config -access, but the BARs are all at fixed addresses. We handle the fixed -addresses by synthesizing Enhanced Allocation (EA) capabilities for -these devices. - -The properties and their meanings are identical to those described in -host-generic-pci.txt except as listed below. - -Properties of the host controller node that differ from -host-generic-pci.txt: - -- compatible : Must be "cavium,pci-host-thunder-ecam" - -Example: - - pcie@84b000000000 { - compatible = "cavium,pci-host-thunder-ecam"; - device_type = "pci"; - msi-parent = <&its>; - msi-map = <0 &its 0x30000 0x10000>; - bus-range = <0 31>; - #size-cells = <2>; - #address-cells = <3>; - #stream-id-cells = <1>; - reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */ - ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */ - }; diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt deleted file mode 100644 index f131faea3b7c..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt +++ /dev/null @@ -1,43 +0,0 @@ -* ThunderX PEM PCIe host controller - -Firmware-initialized PCI host controller found on some Cavium -ThunderX processors. - -The properties and their meanings are identical to those described in -host-generic-pci.txt except as listed below. - -Properties of the host controller node that differ from -host-generic-pci.txt: - -- compatible : Must be "cavium,pci-host-thunder-pem" - -- reg : Two entries: First the configuration space for down - stream devices base address and size, as accessed - from the parent bus. Second, the register bank of - the PEM device PCIe bridge. - -Example: - - pci@87e0,c2000000 { - compatible = "cavium,pci-host-thunder-pem"; - device_type = "pci"; - msi-parent = <&its>; - msi-map = <0 &its 0x10000 0x10000>; - bus-range = <0x8f 0xc7>; - #size-cells = <2>; - #address-cells = <3>; - - reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */ - <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */ - ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */ - <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */ - <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */ - <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */ - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */ - <0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */ - <0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */ - <0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */ - }; diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt deleted file mode 100644 index f3f75bfb42bc..000000000000 --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt +++ /dev/null @@ -1,12 +0,0 @@ -* PLDA XpressRICH3-AXI host controller - -The PLDA XpressRICH3-AXI host controller can be configured in a manner that -makes it compliant with the SBSA[1] standard published by ARM Ltd. For those -scenarios, the host-generic-pci.txt bindings apply with the following additions -to the compatible property: - -Required properties: - - compatible: should contain "plda,xpressrich3-axi" to identify the IP used. - - -[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index ada80b01bf0c..981b4de12807 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -11,6 +11,7 @@ - "qcom,pcie-ipq4019" for ipq4019 - "qcom,pcie-ipq8074" for ipq8074 - "qcom,pcie-qcs404" for qcs404 + - "qcom,pcie-sdm845" for sdm845 - reg: Usage: required @@ -126,6 +127,18 @@ - "master_bus" AXI Master clock - "slave_bus" AXI Slave clock +-clock-names: + Usage: required for sdm845 + Value type: <stringlist> + Definition: Should contain the following entries + - "aux" Auxiliary clock + - "cfg" Configuration clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock + - "slave_q2a" Slave Q2A clock + - "tbu" PCIe TBU clock + - "pipe" PIPE clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -188,6 +201,12 @@ - "pwr" PWR reset - "ahb" AHB reset +- reset-names: + Usage: required for sdm845 + Value type: <stringlist> + Definition: Should contain the following entries + - "pci" PCIe core reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt deleted file mode 100644 index 0a702b13d2ac..000000000000 --- a/Documentation/devicetree/bindings/pci/versatile.txt +++ /dev/null @@ -1,59 +0,0 @@ -* ARM Versatile Platform Baseboard PCI interface - -PCI host controller found on the ARM Versatile PB board's FPGA. - -Required properties: -- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI - controller. -- reg: base addresses and lengths of the PCI controller. There must be 3 - entries: - - Versatile-specific registers - - Self Config space - - Config space -- #address-cells: set to <3> -- #size-cells: set to <2> -- device_type: set to "pci" -- bus-range: set to <0 0xff> -- ranges: ranges for the PCI memory and I/O regions -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI properties to define - the mapping of the PCI interface to interrupt numbers. - -Example: - -pci-controller@10001000 { - compatible = "arm,versatile-pci"; - device_type = "pci"; - reg = <0x10001000 0x1000 - 0x41000000 0x10000 - 0x42000000 0x100000>; - bus-range = <0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - - ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000 /* downstream I/O */ - 0x02000000 0 0x50000000 0x50000000 0 0x10000000 /* non-prefetchable memory */ - 0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */ - - interrupt-map-mask = <0x1800 0 0 7>; - interrupt-map = <0x1800 0 0 1 &sic 28 - 0x1800 0 0 2 &sic 29 - 0x1800 0 0 3 &sic 30 - 0x1800 0 0 4 &sic 27 - - 0x1000 0 0 1 &sic 27 - 0x1000 0 0 2 &sic 28 - 0x1000 0 0 3 &sic 29 - 0x1000 0 0 4 &sic 30 - - 0x0800 0 0 1 &sic 30 - 0x0800 0 0 2 &sic 27 - 0x0800 0 0 3 &sic 28 - 0x0800 0 0 4 &sic 29 - - 0x0000 0 0 1 &sic 29 - 0x0000 0 0 2 &sic 30 - 0x0000 0 0 3 &sic 27 - 0x0000 0 0 4 &sic 28>; -}; diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml new file mode 100644 index 000000000000..07a48c27db1f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/versatile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Platform Baseboard PCI interface + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + PCI host controller found on the ARM Versatile PB board's FPGA. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: arm,versatile-pci + + reg: + items: + - description: Versatile-specific registers + - description: Self Config space + - description: Config space + + ranges: + maxItems: 3 + + "#interrupt-cells": true + + interrupt-map: + maxItems: 16 + + interrupt-map-mask: + items: + - const: 0x1800 + - const: 0 + - const: 0 + - const: 7 + +required: + - compatible + - reg + - ranges + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + +examples: + - | + pci@10001000 { + compatible = "arm,versatile-pci"; + device_type = "pci"; + reg = <0x10001000 0x1000>, + <0x41000000 0x10000>, + <0x42000000 0x100000>; + bus-range = <0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + ranges = + <0x01000000 0 0x00000000 0x43000000 0 0x00010000>, /* downstream I/O */ + <0x02000000 0 0x50000000 0x50000000 0 0x10000000>, /* non-prefetchable memory */ + <0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */ + + interrupt-map-mask = <0x1800 0 0 7>; + interrupt-map = <0x1800 0 0 1 &sic 28>, + <0x1800 0 0 2 &sic 29>, + <0x1800 0 0 3 &sic 30>, + <0x1800 0 0 4 &sic 27>, + + <0x1000 0 0 1 &sic 27>, + <0x1000 0 0 2 &sic 28>, + <0x1000 0 0 3 &sic 29>, + <0x1000 0 0 4 &sic 30>, + + <0x0800 0 0 1 &sic 30>, + <0x0800 0 0 2 &sic 27>, + <0x0800 0 0 3 &sic 28>, + <0x0800 0 0 4 &sic 29>, + + <0x0000 0 0 1 &sic 29>, + <0x0000 0 0 2 &sic 30>, + <0x0000 0 0 3 &sic 27>, + <0x0000 0 0 4 &sic 28>; + }; + + +... diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml new file mode 100644 index 000000000000..020ef9e4c411 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-usb-phy + - allwinner,sun7i-a20-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + maxItems: 1 + description: USB PHY bus clock + + clock-names: + const: usb_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-phy"; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&ccu CLK_USB_PHY>; + clock-names = "usb_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml new file mode 100644 index 000000000000..fd6e126fcf18 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A64 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun50i-a64-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun50i-a64-ccu.h> + #include <dt-bindings/reset/sun50i-a64-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun50i-a64-usb-phy"; + reg = <0x01c19400 0x14>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml new file mode 100644 index 000000000000..7670411002c9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun50i-h6-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU3 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu3 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb3_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb3_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb3_vbus-supply: + description: Regulator controlling USB3 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + phy@5100400 { + #phy-cells = <1>; + compatible = "allwinner,sun50i-h6-usb-phy"; + reg = <0x05100400 0x24>, + <0x05101800 0x4>, + <0x05311800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb3_reset"; + usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml new file mode 100644 index 000000000000..9b319381d1ad --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A13 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun5i-a13-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun5i-ccu.h> + #include <dt-bindings/reset/sun5i-ccu.h> + + phy@1c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb_phy"; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", "usb1_reset"; + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index 230d74f22136..d0b541a461f3 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -15,7 +15,11 @@ properties: const: 0 compatible: - const: allwinner,sun6i-a31-mipi-dphy + oneOf: + - const: allwinner,sun6i-a31-mipi-dphy + - items: + - const: allwinner,sun50i-a64-mipi-dphy + - const: allwinner,sun6i-a31-mipi-dphy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml new file mode 100644 index 000000000000..b0ed01bbf3db --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun6i-a31-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun6i-a31-ccu.h> + #include <dt-bindings/reset/sun6i-a31-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml new file mode 100644 index 000000000000..b0674406f8aa --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + enum: + - allwinner,sun8i-a23-usb-phy + - allwinner,sun8i-a33-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> + #include <dt-bindings/reset/sun8i-a23-a33-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-phy"; + reg = <0x01c19400 0x10>, <0x01c1a800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml new file mode 100644 index 000000000000..48dc9c834a9b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-a83t-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + - description: USB HSIC 12MHz clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + - const: usb2_hsic_12M + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-a83t-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x14>, + <0x01c1b800 0x14>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_HSIC>, + <&ccu CLK_USB_HSIC_12M>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb2_hsic_12M"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_HSIC>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml new file mode 100644 index 000000000000..60c344585276 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H3 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-h3-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + - description: PHY PMU3 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + - const: pmu2 + - const: pmu3 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + - description: USB Host 2 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + - const: usb3_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + - description: USB Host 3 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + - const: usb3_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + + usb3_vbus-supply: + description: Regulator controlling USB3 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + usb3_vbus-supply = <®_usb3_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml new file mode 100644 index 000000000000..a2bb36790fbd --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-r40-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun8i-r40-ccu.h> + #include <dt-bindings/reset/sun8i-r40-ccu.h> + + phy@1c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-r40-usb-phy"; + reg = <0x01c13400 0x14>, + <0x01c14800 0x4>, + <0x01c19800 0x4>, + <0x01c1c800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml new file mode 100644 index 000000000000..eadfd0c9493c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner V3s USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-v3s-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb0_phy + + resets: + maxItems: 1 + description: USB OTG reset + + reset-names: + const: usb0_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index 476c56a1dc8c..72aca81e8959 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -58,7 +58,7 @@ additionalProperties: false examples: - | dsi_dphy: phy@ff2e0000 { - compatible = "rockchip,px30-video-phy"; + compatible = "rockchip,px30-dsi-dphy"; reg = <0x0 0xff2e0000 0x0 0x10000>; clocks = <&pmucru 13>, <&cru 12>; clock-names = "ref", "pclk"; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 1c40ccd40ce4..7510830a79bd 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -1,4 +1,4 @@ -Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY +Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY ------------------------------------------------- Required properties: @@ -27,7 +27,7 @@ the PHY specifier identifies the PHY and its meaning is as follows: supports additional fifth PHY: 4 - MIPI CSIS 2. -Samsung EXYNOS SoC series Display Port PHY +Samsung Exynos SoC series Display Port PHY ------------------------------------------------- Required properties: @@ -38,7 +38,7 @@ Required properties: control pmu registers for power isolation. - #phy-cells : from the generic PHY bindings, must be 0; -Samsung S5P/EXYNOS SoC series USB PHY +Samsung S5P/Exynos SoC series USB PHY ------------------------------------------------- Required properties: diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt deleted file mode 100644 index f2e120af17f0..000000000000 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ /dev/null @@ -1,68 +0,0 @@ -Allwinner sun4i USB PHY ------------------------ - -Required properties: -- compatible : should be one of - * allwinner,sun4i-a10-usb-phy - * allwinner,sun5i-a13-usb-phy - * allwinner,sun6i-a31-usb-phy - * allwinner,sun7i-a20-usb-phy - * allwinner,sun8i-a23-usb-phy - * allwinner,sun8i-a33-usb-phy - * allwinner,sun8i-a83t-usb-phy - * allwinner,sun8i-h3-usb-phy - * allwinner,sun8i-r40-usb-phy - * allwinner,sun8i-v3s-usb-phy - * allwinner,sun50i-a64-usb-phy - * allwinner,sun50i-h6-usb-phy -- reg : a list of offset + length pairs -- reg-names : - * "phy_ctrl" - * "pmu0" for H3, V3s, A64 or H6 - * "pmu1" - * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "pmu3" for sun8i-h3 or sun50i-h6 -- #phy-cells : from the generic phy bindings, must be 1 -- clocks : phandle + clock specifier for the phy clocks -- clock-names : - * "usb_phy" for sun4i, sun5i or sun7i - * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i - * "usb0_phy", "usb1_phy" for sun8i - * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t - * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 - * "usb0_phy" and "usb3_phy" for sun50i-h6 -- resets : a list of phandle + reset specifier pairs -- reset-names : - * "usb0_reset" - * "usb1_reset" - * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "usb3_reset" for sun8i-h3 and sun50i-h6 - -Optional properties: -- usb0_id_det-gpios : gpio phandle for reading the otg id pin value -- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus -- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect -- usb0_vbus-supply : regulator phandle for controller usb0 vbus -- usb1_vbus-supply : regulator phandle for controller usb1 vbus -- usb2_vbus-supply : regulator phandle for controller usb2 vbus -- usb3_vbus-supply : regulator phandle for controller usb3 vbus - -Example: - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-phy"; - /* phy base regs, phy1 pmu reg, phy2 pmu reg */ - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; - reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ - usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 5c913d4cf36c..3049cf88bdcf 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -35,6 +35,10 @@ Optional Properties: for each of the battery capacity lookup table. The first temperature value specifies the OCV table 0, and the second temperature value specifies the OCV table 1, and so on. + - resistance-temp-table: An array providing the temperature in degree Celsius + and corresponding battery internal resistance percent, which is used to look + up the resistance percent according to current temperature to get a accurate + batterty internal resistance in different temperatures. Battery properties are named, where possible, for the corresponding elements in enum power_supply_property, defined in @@ -61,6 +65,7 @@ Example: ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...; ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...; + resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; }; charger: charger@11 { diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt index dc0568933359..dc9c8f76e06c 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt @@ -1,11 +1,14 @@ Binding for TI bq25890 Li-Ion Charger -This driver will support the bq25896 and the bq25890. There are other ICs -in the same family but those have not been tested. +This driver will support the bq25892, the bq25896 and the bq25890. There are +other ICs in the same family but those have not been tested. Required properties: - compatible: Should contain one of the following: * "ti,bq25890" + * "ti,bq25892" + * "ti,bq25895" + * "ti,bq25896" - reg: integer, i2c address of the device. - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); - ti,charge-current: integer, maximum charging current (in uA); diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt new file mode 100644 index 000000000000..4e0186b8380f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt @@ -0,0 +1,33 @@ +max17040_battery +~~~~~~~~~~~~~~~~ + +Required properties : + - compatible : "maxim,max17040" or "maxim,max77836-battery" + - reg: i2c slave address + +Optional properties : +- maxim,alert-low-soc-level : The alert threshold that sets the state of + charge level (%) where an interrupt is + generated. Can be configured from 1 up to 32 + (%). If skipped the power up default value of + 4 (%) will be used. +- interrupts : Interrupt line see Documentation/devicetree/ + bindings/interrupt-controller/interrupts.txt +- wakeup-source : This device has wakeup capabilities. Use this + property to use alert low SOC level interrupt + as wake up source. + +Optional properties support interrupt functionality for alert low state of +charge level, present in some ICs in the same family, and should be used with +compatible "maxim,max77836-battery". + +Example: + + battery-fuel-gauge@36 { + compatible = "maxim,max77836-battery"; + reg = <0x36>; + maxim,alert-low-soc-level = <10>; + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; diff --git a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt index 3f3894aaeebc..f34c5daae9af 100644 --- a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt +++ b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt @@ -2,7 +2,11 @@ max17042_battery ~~~~~~~~~~~~~~~~ Required properties : - - compatible : "maxim,max17042" + - compatible : one of the following + * "maxim,max17042" + * "maxim,max17047" + * "maxim,max17050" + * "maxim,max17055" Optional properties : - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt index 0a5705b8b592..b6359b590383 100644 --- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt @@ -13,6 +13,8 @@ Required properties: - io-channel-names: Should be "bat-temp" or "charge-vol". - nvmem-cells: A phandle to the calibration cells provided by eFuse device. - nvmem-cell-names: Should be "fgu_calib". +- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter + chip in micro Ohms. - monitored-battery: Phandle of battery characteristics devicetree node. See Documentation/devicetree/bindings/power/supply/battery.txt @@ -52,5 +54,6 @@ Example: nvmem-cells = <&fgu_calib>; nvmem-cell-names = "fgu_calib"; monitored-battery = <&bat>; + sprd,calib-resistance-micro-ohms = <21500>; }; }; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml new file mode 100644 index 000000000000..001c0d2a8c1f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Peripheral Reset Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +select: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-ahb1-reset + - allwinner,sun6i-a31-clock-reset + + # The PRCM on the A31 and A23 will have the reg property missing, + # since it's set at the upper level node, and will be validated by + # PRCM's schema. Make sure we only validate standalone nodes. + required: + - compatible + - reg + +properties: + "#reset-cells": + const: 1 + description: > + This additional argument passed to that reset controller is the + offset of the bit controlling this particular reset line in the + register. + + compatible: + enum: + - allwinner,sun6i-a31-ahb1-reset + - allwinner,sun6i-a31-clock-reset + + reg: + maxItems: 1 + +required: + - "#reset-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + ahb1_rst: reset@1c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; + }; + + - | + apbs_rst: reset@80014b0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x080014b0 0x4>; + }; + +... diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt deleted file mode 100644 index 4ca66c96fe97..000000000000 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt +++ /dev/null @@ -1,21 +0,0 @@ -Allwinner sunxi Peripheral Reset Controller -=========================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be one of the following: - "allwinner,sun6i-a31-ahb1-reset" - "allwinner,sun6i-a31-clock-reset" -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -example: - -ahb1_rst: reset@1c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; -}; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt deleted file mode 100644 index 130ca5b98253..000000000000 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ /dev/null @@ -1,61 +0,0 @@ -STM32 Real Time Clock - -Required properties: -- compatible: can be one of the following: - - "st,stm32-rtc" for devices compatible with stm32(f4/f7). - - "st,stm32h7-rtc" for devices compatible with stm32h7. - - "st,stm32mp1-rtc" for devices compatible with stm32mp1. -- reg: address range of rtc register set. -- clocks: can use up to two clocks, depending on part used: - - "rtc_ck": RTC clock source. - - "pclk": RTC APB interface clock. - It is not present on stm32(f4/f7). - It is required on stm32(h7/mp1). -- clock-names: must be "rtc_ck" and "pclk". - It is required on stm32(h7/mp1). -- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required - for rtc alarm wakeup interrupt. -- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to - access control register at offset, and change the dbp (Disable Backup - Protection) bit represented by the mask, mandatory to disable/enable backup - domain (RTC registers) write protection. - It is required on stm32(f4/f7/h7). - -Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7): -- assigned-clocks: reference to the rtc_ck clock entry. -- assigned-clock-parents: phandle of the new parent clock of rtc_ck. - -Example: - - rtc: rtc@40002800 { - compatible = "st,stm32-rtc"; - reg = <0x40002800 0x400>; - clocks = <&rcc 1 CLK_RTC>; - assigned-clocks = <&rcc 1 CLK_RTC>; - assigned-clock-parents = <&rcc 1 CLK_LSE>; - interrupt-parent = <&exti>; - interrupts = <17 1>; - st,syscfg = <&pwrcfg 0x00 0x100>; - }; - - rtc: rtc@58004000 { - compatible = "st,stm32h7-rtc"; - reg = <0x58004000 0x400>; - clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>; - clock-names = "pclk", "rtc_ck"; - assigned-clocks = <&rcc RTC_CK>; - assigned-clock-parents = <&rcc LSE_CK>; - interrupt-parent = <&exti>; - interrupts = <17 1>; - interrupt-names = "alarm"; - st,syscfg = <&pwrcfg 0x00 0x100>; - }; - - rtc: rtc@5c004000 { - compatible = "st,stm32mp1-rtc"; - reg = <0x5c004000 0x400>; - clocks = <&rcc RTCAPB>, <&rcc RTC>; - clock-names = "pclk", "rtc_ck"; - interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>, - <&exti 19 1>; - }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml new file mode 100644 index 000000000000..0a54296d7218 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Real Time Clock Bindings + +maintainers: + - Gabriel Fernandez <gabriel.fernandez@st.com> + +properties: + compatible: + enum: + - st,stm32-rtc + - st,stm32h7-rtc + - st,stm32mp1-rtc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: rtc_ck + + interrupts: + maxItems: 1 + + st,syscfg: + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + - items: + minItems: 3 + maxItems: 3 + description: | + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. + + assigned-clocks: + description: | + override default rtc_ck parent clock reference to the rtc_ck clock entry + maxItems: 1 + + assigned-clock-parents: + description: | + override default rtc_ck parent clock phandle of the new parent clock of rtc_ck + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32-rtc + + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + + clock-names: false + + required: + - st,syscfg + + - if: + properties: + compatible: + contains: + const: st,stm32h7-rtc + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + required: + - clock-names + - st,syscfg + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-rtc + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + assigned-clocks: false + assigned-clock-parents: false + + required: + - clock-names + +required: + - compatible + - reg + - clocks + - interrupts + +examples: + - | + #include <dt-bindings/mfd/stm32f4-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + st,syscfg = <&pwrcfg 0x00 0x100>; + }; + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index f5f5ab0fd14e..c904e2e68332 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -10,6 +10,8 @@ Required properties: on i.MX7ULP SoC with 32-bit little-endian register organization - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated on i.MX8QXP SoC with 32-bit little-endian register organization + - "fsl,imx8qm-lpuart" for lpuart compatible with the one integrated + on i.MX8QM SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index b92592dff6dd..a7fe93efc4a5 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -1,31 +1 @@ -* RS485 serial communications - -The RTS signal is capable of automatically controlling line direction for -the built-in half-duplex mode. -The properties described hereafter shall be given to a half-duplex capable -UART node. - -Optional properties: -- rs485-rts-delay: prop-encoded-array <a b> where: - * a is the delay between rts signal and beginning of data sent in milliseconds. - it corresponds to the delay before sending data. - * b is the delay between end of data sent and rts signal in milliseconds - it corresponds to the delay after sending data and actual release of the line. - If this property is not specified, <0 0> is assumed. -- rs485-rts-active-low: drive RTS low when sending (default is high). -- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 - feature at boot time. It can be disabled later with proper ioctl. -- rs485-rx-during-tx: empty property that enables the receiving of data even - while sending data. - -RS485 example for Atmel USART: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - atmel,use-dma-rx; - atmel,use-dma-tx; - linux,rs485-enabled-at-boot-time; - rs485-rts-delay = <0 200>; // in milliseconds - }; - +See rs485.yaml diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml new file mode 100644 index 000000000000..d4beaf11222d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/rs485.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RS485 serial communications Bindings + +description: The RTS signal is capable of automatically controlling + line direction for the built-in half-duplex mode. + The properties described hereafter shall be given to a + half-duplex capable UART node. + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + rs485-rts-delay: + description: prop-encoded-array <a b> + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + items: + - description: + Delay between rts signal and beginning of data sent in milliseconds. + It corresponds to the delay before sending data. + default: 0 + maximum: 1000 + - description: + Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release of the line. + default: 0 + maximum: 1000 + + rs485-rts-active-low: + description: drive RTS low when sending (default is high). + $ref: /schemas/types.yaml#/definitions/flag + + linux,rs485-enabled-at-boot-time: + description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. + $ref: /schemas/types.yaml#/definitions/flag + + rs485-rx-during-tx: + description: enables the receiving of data even while sending data. + $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml new file mode 100644 index 000000000000..238c44192d31 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Erwan Le Ray <erwan.leray@st.com> + +title: STMicroelectronics STM32 USART bindings + +allOf: + - $ref: rs485.yaml + +properties: + compatible: + enum: + - st,stm32-uart + - st,stm32f7-uart + - st,stm32h7-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + label: + description: label associated with this uart + + st,hw-flow-ctrl: + description: enable hardware flow control + $ref: /schemas/types.yaml#/definitions/flag + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + items: + enum: [ rx, tx ] + minItems: 1 + maxItems: 2 + + wakeup-source: true + + rs485-rts-delay: true + rs485-rts-active-low: true + linux,rs485-enabled-at-boot-time: true + rs485-rx-during-tx: true + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + usart1: serial@40011000 { + compatible = "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&rcc 0 164>; + dmas = <&dma2 2 4 0x414 0x0>, + <&dma2 7 4 0x414 0x0>; + dma-names = "rx", "tx"; + rs485-rts-active-low; + }; + +... diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt deleted file mode 100644 index 8620f7fcbd50..000000000000 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ /dev/null @@ -1,57 +0,0 @@ -* STMicroelectronics STM32 USART - -Required properties: -- compatible: can be either: - - "st,stm32-uart", - - "st,stm32f7-uart", - - "st,stm32h7-uart". - depending is compatible with stm32(f4), stm32f7 or stm32h7. -- reg: The address and length of the peripheral registers space -- interrupts: - - The interrupt line for the USART instance, - - An optional wake-up interrupt. -- clocks: The input clock of the USART instance - -Optional properties: -- resets: Must contain the phandle to the reset controller. -- pinctrl: The reference on the pins configuration -- st,hw-flow-ctrl: bool flag to enable hardware flow control. -- rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low, - linux,rs485-enabled-at-boot-time: see rs485.txt. -- dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt -- dma-names: "rx" and/or "tx" -- wakeup-source: bool flag to indicate this device has wakeup capabilities -- interrupt-names, if optional wake-up interrupt is used, should be: - - "event": the name for the interrupt line of the USART instance - - "wakeup" the name for the optional wake-up interrupt - - -Examples: -usart4: serial@40004c00 { - compatible = "st,stm32-uart"; - reg = <0x40004c00 0x400>; - interrupts = <52>; - clocks = <&clk_pclk1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart4>; -}; - -usart2: serial@40004400 { - compatible = "st,stm32-uart"; - reg = <0x40004400 0x400>; - interrupts = <38>; - clocks = <&clk_pclk1>; - st,hw-flow-ctrl; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; -}; - -usart1: serial@40011000 { - compatible = "st,stm32-uart"; - reg = <0x40011000 0x400>; - interrupts = <37>; - clocks = <&rcc 0 164>; - dmas = <&dma2 2 4 0x414 0x0>, - <&dma2 7 4 0x414 0x0>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml new file mode 100644 index 000000000000..80bac7a182d5 --- /dev/null +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 System Control Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: + The SRAM controller found on most Allwinner devices is represented + by a regular node for the SRAM controller itself, with sub-nodes + representing the SRAM handled by the SRAM controller. + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-sram-controller + deprecated: true + - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun5i-a13-system-control + - items: + - const: allwinner,sun7i-a20-system-control + - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun8i-a23-system-control + - const: allwinner,sun8i-h3-system-control + - const: allwinner,sun50i-a64-sram-controller + deprecated: true + - const: allwinner,sun50i-a64-system-control + - const: allwinner,sun50i-h5-system-control + - items: + - const: allwinner,sun50i-h6-system-control + - const: allwinner,sun50i-a64-system-control + - items: + - const: allwinner,suniv-f1c100s-system-control + - const: allwinner,sun4i-a10-system-control + + reg: + maxItems: 1 + + ranges: true + +patternProperties: + "^sram@[a-z0-9]+": + type: object + + properties: + compatible: + const: mmio-sram + + patternProperties: + "^sram-section?@[a-f0-9]+$": + type: object + + properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun50i-a64-sram-c + - items: + - const: allwinner,sun5i-a13-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 + - items: + - const: allwinner,sun7i-a20-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 + - items: + - const: allwinner,sun5i-a13-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun7i-a20-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun8i-a23-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun8i-h3-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun50i-a64-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun50i-h5-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun50i-h6-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 + - items: + - const: allwinner,sun5i-a13-sram-d + - const: allwinner,sun4i-a10-sram-d + - items: + - const: allwinner,sun7i-a20-sram-d + - const: allwinner,sun4i-a10-sram-d + - items: + - const: allwinner,suniv-f1c100s-sram-d + - const: allwinner,sun4i-a10-sram-d + - items: + - const: allwinner,sun50i-h6-sram-c + - const: allwinner,sun50i-a64-sram-c + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index ee2287a1b14d..7b83cc6c9bfa 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -55,7 +55,7 @@ properties: type: boolean patternProperties: - "^([a-z]*-)?sram@[a-f0-9]+$": + "^([a-z]*-)?sram(-section)?@[a-f0-9]+$": type: object description: Each child of the sram node specifies a region of reserved memory. @@ -64,15 +64,20 @@ patternProperties: description: Should contain a vendor specific string in the form <vendor>,[<device>-]<usage> - enum: - - allwinner,sun9i-a80-smp-sram - - amlogic,meson8-smp-sram - - amlogic,meson8b-smp-sram - - renesas,smp-sram - - rockchip,rk3066-smp-sram - - samsung,exynos4210-sysram - - samsung,exynos4210-sysram-ns - - socionext,milbeaut-smp-sram + contains: + enum: + - allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun4i-a10-sram-c1 + - allwinner,sun4i-a10-sram-d + - allwinner,sun9i-a80-smp-sram + - allwinner,sun50i-a64-sram-c + - amlogic,meson8-smp-sram + - amlogic,meson8b-smp-sram + - renesas,smp-sram + - rockchip,rk3066-smp-sram + - samsung,exynos4210-sysram + - samsung,exynos4210-sysram-ns + - socionext,milbeaut-smp-sram reg: description: diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt deleted file mode 100644 index 380246a805f2..000000000000 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ /dev/null @@ -1,113 +0,0 @@ -Allwinnner SoC SRAM controllers ------------------------------------------------------ - -The SRAM controller found on most Allwinner devices is represented by -a regular node for the SRAM controller itself, with sub-nodes -reprensenting the SRAM handled by the SRAM controller. - -Controller Node ---------------- - -Required properties: -- compatible : should be: - - "allwinner,sun4i-a10-sram-controller" (deprecated) - - "allwinner,sun4i-a10-system-control" - - "allwinner,sun5i-a13-system-control" - - "allwinner,sun7i-a20-system-control", "allwinner,sun4i-a10-system-control" - - "allwinner,sun8i-a23-system-control" - - "allwinner,sun8i-h3-system-control" - - "allwinner,sun50i-a64-sram-controller" (deprecated) - - "allwinner,sun50i-a64-system-control" - - "allwinner,sun50i-h5-system-control" - - "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control" - - "allwinner,suniv-f1c100s-system-control", "allwinner,sun4i-a10-system-control" -- reg : sram controller register offset + length - -SRAM nodes ----------- - -Each SRAM is described using the mmio-sram bindings documented in -Documentation/devicetree/bindings/sram/sram.txt - -Each SRAM will have SRAM sections that are going to be handled by the -SRAM controller as subnodes. These sections are represented following -once again the representation described in the mmio-sram binding. - -The valid sections compatible for A10 are: - - allwinner,sun4i-a10-sram-a3-a4 - - allwinner,sun4i-a10-sram-c1 - - allwinner,sun4i-a10-sram-d - -The valid sections compatible for A13 are: - - allwinner,sun5i-a13-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4 - - allwinner,sun5i-a13-sram-c1, allwinner,sun4i-a10-sram-c1 - - allwinner,sun5i-a13-sram-d, allwinner,sun4i-a10-sram-d - -The valid sections compatible for A20 are: - - allwinner,sun7i-a20-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4 - - allwinner,sun7i-a20-sram-c1, allwinner,sun4i-a10-sram-c1 - - allwinner,sun7i-a20-sram-d, allwinner,sun4i-a10-sram-d - -The valid sections compatible for A23/A33 are: - - allwinner,sun8i-a23-sram-c1, allwinner,sun4i-a10-sram-c1 - -The valid sections compatible for H3 are: - - allwinner,sun8i-h3-sram-c1, allwinner,sun4i-a10-sram-c1 - -The valid sections compatible for A64 are: - - allwinner,sun50i-a64-sram-c - - allwinner,sun50i-a64-sram-c1, allwinner,sun4i-a10-sram-c1 - -The valid sections compatible for H5 are: - - allwinner,sun50i-h5-sram-c1, allwinner,sun4i-a10-sram-c1 - -The valid sections compatible for H6 are: - - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c - - allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1 - -The valid sections compatible for F1C100s are: - - allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d - -Devices using SRAM sections ---------------------------- - -Some devices need to request to the SRAM controller to map an SRAM for -their exclusive use. - -The relationship between such a device and an SRAM section is -expressed through the allwinner,sram property, that will take a -phandle and an argument. - -This valid values for this argument are: - - 0: CPU - - 1: Device - -Example -------- -system-control@1c00000 { - compatible = "allwinner,sun4i-a10-system-control"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@00000000 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - }; - }; -}; - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - ... - - allwinner,sram = <&emac_sram 1>; -}; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index b3f0fe96ff0d..102f319833d9 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -99,22 +99,22 @@ examples: compatible = "arm,armv7-timer-mem"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0xf0001000 0x1000>; reg = <0xf0000000 0x1000>; clock-frequency = <50000000>; - frame@f0001000 { + frame@0 { frame-number = <0>; interrupts = <0 13 0x8>, <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; + reg = <0x0000 0x1000>, + <0x1000 0x1000>; }; - frame@f0003000 { + frame@2000 { frame-number = <1>; interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; + reg = <0x2000 0x1000>; }; }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 765fd1c170df..978de7d37c66 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -104,6 +104,10 @@ properties: - infineon,slb9645tt # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 + # Infineon Multi-phase Digital VR Controller xdpe12254 + - infineon,xdpe12254 + # Infineon Multi-phase Digital VR Controller xdpe12284 + - infineon,xdpe12284 # Inspur Power System power supply unit version 1 - inspur,ipsps1 # Intersil ISL29028 Ambient Light and Proximity Sensor @@ -132,6 +136,8 @@ properties: - maxim,max6621 # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface - maxim,max6625 + # 3-Channel Remote Temperature Sensor + - maxim,max31730 # mCube 3-axis 8-bit digital accelerometer - mcube,mc3230 # MEMSIC 2-axis 8-bit digital accelerometer @@ -354,6 +360,10 @@ properties: - ti,tmp103 # Digital Temperature Sensor - ti,tmp275 + # TI Dual channel DCAP+ multiphase controller TPS53679 + - ti,tps53679 + # TI Dual channel DCAP+ multiphase controller TPS53688 + - ti,tps53688 # Winbond/Nuvoton H/W Monitor - winbond,w83793 # i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 4efb77b653ab..267fce165994 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -107,7 +107,7 @@ examples: reg = <0xff400000 0x40000>; interrupts = <31>; clocks = <&clkc_usb1>; - clock-names = "ddr"; + clock-names = "otg"; phys = <&usb2_phy1>; dr_mode = "peripheral"; g-rx-fifo-size = <192>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt deleted file mode 100644 index aafff3a6904d..000000000000 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ /dev/null @@ -1,64 +0,0 @@ -Platform DesignWare HS OTG USB 2.0 controller ------------------------------------------------------ - -Required properties: -- compatible : One of: - - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; - - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs; - - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; - - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - - "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs; - - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; - - snps,dwc2: A generic DWC2 USB controller with default parameters. - - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs - configured in FS mode; - - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs - configured in HS mode; - - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs - configured in HS mode; -- reg : Should contain 1 register range (address and length) -- interrupts : Should contain 1 interrupt -- clocks: clock provider specifier -- clock-names: shall be "otg" -Refer to clk/clock-bindings.txt for generic clock consumer properties - -Optional properties: -- phys: phy provider specifier -- phy-names: shall be "usb2-phy" -- vbus-supply: reference to the VBUS regulator. Depending on the current mode - this is enabled (in "host" mode") or disabled (in "peripheral" mode). The - regulator is updated if the controller is configured in "otg" mode and the - status changes between "host" and "peripheral". -Refer to phy/phy-bindings.txt for generic phy consumer properties -- dr_mode: shall be one of "host", "peripheral" and "otg" - Refer to usb/generic.txt -- g-rx-fifo-size: size of rx fifo size in gadget mode. -- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. -- snps,need-phy-for-wake: If present indicates that the phy needs to be left - on for remote wakeup during suspend. -- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when - we detect a wakeup. This is due to a hardware errata. - -Deprecated properties: -- g-use-dma: gadget DMA mode is automatically detected - -Example: - - usb@101c0000 { - compatible = "ralink,rt3050-usb, snps,dwc2"; - reg = <0x101c0000 40000>; - interrupts = <18>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - snps,need-phy-for-wake; - }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml new file mode 100644 index 000000000000..71cf7ba32237 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/dwc2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare HS OTG USB 2.0 controller Bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + oneOf: + - const: brcm,bcm2835-usb + - const: hisilicon,hi6220-usb + - items: + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,px30-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,rk3036-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,rv1108-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,rk3188-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,rk3228-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - items: + - const: rockchip,rk3288-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + - const: lantiq,arx100-usb + - const: lantiq,xrx200-usb + - items: + - const: amlogic,meson8-usb + - const: snps,dwc2 + - items: + - const: amlogic,meson8b-usb + - const: snps,dwc2 + - const: amlogic,meson-gxbb-usb + - items: + - const: amlogic,meson-g12a-usb + - const: snps,dwc2 + - const: amcc,dwc-otg + - const: snps,dwc2 + - const: st,stm32f4x9-fsotg + - const: st,stm32f4x9-hsotg + - const: st,stm32f7-hsotg + - const: samsung,s3c6400-hsotg + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: otg + + resets: + items: + - description: common reset + - description: ecc reset + minItems: 1 + + reset-names: + items: + - const: dwc2 + - const: dwc2-ecc + minItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: usb2-phy + + vbus-supply: + description: reference to the VBUS regulator. Depending on the current mode + this is enabled (in "host" mode") or disabled (in "peripheral" mode). The + regulator is updated if the controller is configured in "otg" mode and the + status changes between "host" and "peripheral". + + vusb_d-supply: + description: phandle to voltage regulator of digital section, + + vusb_a-supply: + description: phandle to voltage regulator of analog section. + + dr_mode: + enum: [host, peripheral, otg] + + g-rx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: size of rx fifo size in gadget mode. + + g-np-tx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: size of non-periodic tx fifo size in gadget mode. + + g-tx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: size of periodic tx fifo per endpoint (except ep0) in gadget mode. + + snps,need-phy-for-wake: + $ref: /schemas/types.yaml#/definitions/flag + description: If present indicates that the phy needs to be left on for remote wakeup during suspend. + + snps,reset-phy-on-wake: + $ref: /schemas/types.yaml#/definitions/flag + description: If present indicates that we need to reset the PHY when we detect a wakeup. + This is due to a hardware errata. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + usb@101c0000 { + compatible = "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index cf5a1ad456e6..e6790d2a4da9 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -2,10 +2,11 @@ Generic USB Properties Optional properties: - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed", "high-speed", - "full-speed" and "low-speed". In case this isn't passed - via DT, USB controllers should default to their maximum - HW capability. + speed. Valid arguments are "super-speed-plus", + "super-speed", "high-speed", "full-speed" and + "low-speed". In case this isn't passed via DT, USB + controllers should default to their maximum HW + capability. - dr_mode: tells Dual-Role USB controllers that we want to work on a particular mode. Valid arguments are "host", "peripheral" and "otg". In case this attribute isn't diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 315ebac520b3..7fcd48adc276 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -151,6 +151,8 @@ patternProperties: description: Bosch Sensortec GmbH "^boundary,.*": description: Boundary Devices Inc. + "^broadmobi,.*": + description: Shanghai Broadmobi Communication Technology Co.,Ltd. "^brcm,.*": description: Broadcom Corporation "^buffalo,.*": @@ -159,6 +161,8 @@ patternProperties: description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International + "^calaosystems,.*": + description: CALAO Systems SAS "^calxeda,.*": description: Calxeda "^capella,.*": @@ -477,6 +481,8 @@ patternProperties: description: Shenzhen Jesurun Electronics Business Dept. "^jianda,.*": description: Jiandangjing Technology Co., Ltd. + "^kam,.*": + description: Kamstrup A/S "^karo,.*": description: Ka-Ro electronics GmbH "^keithkoep,.*": @@ -515,6 +521,8 @@ patternProperties: description: Lantiq Semiconductor "^lattice,.*": description: Lattice Semiconductor + "^leadtek,.*": + description: Shenzhen Leadtek Technology Co., Ltd. "^leez,.*": description: Leez "^lego,.*": @@ -547,6 +555,8 @@ patternProperties: description: Logic PD, Inc. "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. + "^loongson,.*": + description: Loongson Technology Corporation Limited "^lsi,.*": description: LSI Corp. (LSI Logic) "^lwn,.*": @@ -615,6 +625,8 @@ patternProperties: description: Moxa Inc. "^mpl,.*": description: MPL AG + "^mps,.*": + description: Monolithic Power Systems Inc. "^mqmaker,.*": description: mqmaker Inc. "^mscc,.*": @@ -827,6 +839,8 @@ patternProperties: description: Sancloud Ltd "^sandisk,.*": description: Sandisk Corporation + "^satoz,.*": + description: Satoz International Co., Ltd "^sbs,.*": description: Smart Battery System "^schindler,.*": @@ -915,8 +929,12 @@ patternProperties: description: Startek "^ste,.*": description: ST-Ericsson + deprecated: true "^stericsson,.*": description: ST-Ericsson + "^st-ericsson,.*": + description: ST-Ericsson + deprecated: true "^summit,.*": description: Summit microelectronics "^sunchip,.*": @@ -1060,12 +1078,16 @@ patternProperties: description: Extreme Engineering Solutions (X-ES) "^xillybus,.*": description: Xillybus Ltd. + "^xinpeng,.*": + description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": description: Xilinx "^xunlong,.*": description: Shenzhen Xunlong Software CO.,Limited "^xylon,.*": description: Xylon + "^yna,.*": + description: YSH & ATIL "^yones-toptech,.*": description: Yones Toptech Co., Ltd. "^ysoft,.*": diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt index a5bf04dba410..79b3c62f183d 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt @@ -19,6 +19,7 @@ Required properties: - "renesas,r8a7794-wdt" (R-Car E2) - "renesas,r8a7795-wdt" (R-Car H3) - "renesas,r8a7796-wdt" (R-Car M3-W) + - "renesas,r8a77961-wdt" (R-Car M3-W+) - "renesas,r8a77965-wdt" (R-Car M3-N) - "renesas,r8a77970-wdt" (R-Car V3M) - "renesas,r8a77990-wdt" (R-Car E3) diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt deleted file mode 100644 index d8f4430b0a13..000000000000 --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt +++ /dev/null @@ -1,26 +0,0 @@ -STM32 Independent WatchDoG (IWDG) ---------------------------------- - -Required properties: -- compatible: Should be either: - - "st,stm32-iwdg" - - "st,stm32mp1-iwdg" -- reg: Physical base address and length of the registers set for the device -- clocks: Reference to the clock entry lsi. Additional pclk clock entry - is required only for st,stm32mp1-iwdg. -- clock-names: Name of the clocks used. - "lsi" for st,stm32-iwdg - "lsi", "pclk" for st,stm32mp1-iwdg - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. - -Example: - -iwdg: watchdog@40003000 { - compatible = "st,stm32-iwdg"; - reg = <0x40003000 0x400>; - clocks = <&clk_lsi>; - clock-names = "lsi"; - timeout-sec = <32>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml new file mode 100644 index 000000000000..a27c504e2e4f --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/st,stm32-iwdg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings + +maintainers: + - Yannick Fertre <yannick.fertre@st.com> + - Christophe Roullier <christophe.roullier@st.com> + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + enum: + - st,stm32-iwdg + - st,stm32mp1-iwdg + + reg: + maxItems: 1 + + clocks: + items: + - description: Low speed clock + - description: Optional peripheral clock + minItems: 1 + maxItems: 2 + + clock-names: + items: + enum: + - lsi + - pclk + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&rcc IWDG2>, <&rcc CK_LSI>; + clock-names = "pclk", "lsi"; + timeout-sec = <32>; + }; + +... diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index efcd5d21dc2b..7635ab230456 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -121,7 +121,13 @@ Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be installed. Ensure they are in your PATH (~/.local/bin by default). dtc must also be built with YAML output support enabled. This requires that -libyaml and its headers be installed on the host system. +libyaml and its headers be installed on the host system. For some distributions +that involves installing the development package, such as: + +Debian: + apt-get install libyaml-dev +Fedora: + dnf -y install libyaml-devel Running checks ~~~~~~~~~~~~~~ diff --git a/Documentation/doc-guide/contributing.rst b/Documentation/doc-guide/contributing.rst new file mode 100644 index 000000000000..10956583d22e --- /dev/null +++ b/Documentation/doc-guide/contributing.rst @@ -0,0 +1,294 @@ +.. SPDX-License-Identifier: GPL-2.0 +How to help improve kernel documentation +======================================== + +Documentation is an important part of any software-development project. +Good documentation helps to bring new developers in and helps established +developers work more effectively. Without top-quality documentation, a lot +of time is wasted in reverse-engineering the code and making avoidable +mistakes. + +Unfortunately, the kernel's documentation currently falls far short of what +it needs to be to support a project of this size and importance. + +This guide is for contributors who would like to improve that situation. +Kernel documentation improvements can be made by developers at a variety of +skill levels; they are a relatively easy way to learn the kernel process in +general and find a place in the community. The bulk of what follows is the +documentation maintainer's list of tasks that most urgently need to be +done. + +The documentation TODO list +--------------------------- + +There is an endless list of tasks that need to be carried out to get our +documentation to where it should be. This list contains a number of +important items, but is far from exhaustive; if you see a different way to +improve the documentation, please do not hold back! + +Addressing warnings +~~~~~~~~~~~~~~~~~~~ + +The documentation build currently spews out an unbelievable number of +warnings. When you have that many, you might as well have none at all; +people ignore them, and they will never notice when their work adds new +ones. For this reason, eliminating warnings is one of the highest-priority +tasks on the documentation TODO list. The task itself is reasonably +straightforward, but it must be approached in the right way to be +successful. + +Warnings issued by a compiler for C code can often be dismissed as false +positives, leading to patches aimed at simply shutting the compiler up. +Warnings from the documentation build almost always point at a real +problem; making those warnings go away requires understanding the problem +and fixing it at its source. For this reason, patches fixing documentation +warnings should probably not say "fix a warning" in the changelog title; +they should indicate the real problem that has been fixed. + +Another important point is that documentation warnings are often created by +problems in kerneldoc comments in C code. While the documentation +maintainer appreciates being copied on fixes for these warnings, the +documentation tree is often not the right one to actually carry those +fixes; they should go to the maintainer of the subsystem in question. + +For example, in a documentation build I grabbed a pair of warnings nearly +at random:: + + ./drivers/devfreq/devfreq.c:1818: warning: bad line: + - Resource-managed devfreq_register_notifier() + ./drivers/devfreq/devfreq.c:1854: warning: bad line: + - Resource-managed devfreq_unregister_notifier() + +(The lines were split for readability). + +A quick look at the source file named above turned up a couple of kerneldoc +comments that look like this:: + + /** + * devm_devfreq_register_notifier() + - Resource-managed devfreq_register_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + * @list: DEVFREQ_TRANSITION_NOTIFIER. + */ + +The problem is the missing "*", which confuses the build system's +simplistic idea of what C comment blocks look like. This problem had been +present since that comment was added in 2016 — a full four years. Fixing +it was a matter of adding the missing asterisks. A quick look at the +history for that file showed what the normal format for subject lines is, +and ``scripts/get_maintainer.pl`` told me who should receive it. The +resulting patch looked like this:: + + [PATCH] PM / devfreq: Fix two malformed kerneldoc comments + + Two kerneldoc comments in devfreq.c fail to adhere to the required format, + resulting in these doc-build warnings: + + ./drivers/devfreq/devfreq.c:1818: warning: bad line: + - Resource-managed devfreq_register_notifier() + ./drivers/devfreq/devfreq.c:1854: warning: bad line: + - Resource-managed devfreq_unregister_notifier() + + Add a couple of missing asterisks and make kerneldoc a little happier. + + Signed-off-by: Jonathan Corbet <corbet@lwn.net> + --- + drivers/devfreq/devfreq.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + + diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c + index 57f6944d65a6..00c9b80b3d33 100644 + --- a/drivers/devfreq/devfreq.c + +++ b/drivers/devfreq/devfreq.c + @@ -1814,7 +1814,7 @@ static void devm_devfreq_notifier_release(struct device *dev, void *res) + + /** + * devm_devfreq_register_notifier() + - - Resource-managed devfreq_register_notifier() + + * - Resource-managed devfreq_register_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + @@ -1850,7 +1850,7 @@ EXPORT_SYMBOL(devm_devfreq_register_notifier); + + /** + * devm_devfreq_unregister_notifier() + - - Resource-managed devfreq_unregister_notifier() + + * - Resource-managed devfreq_unregister_notifier() + * @dev: The devfreq user device. (parent of devfreq) + * @devfreq: The devfreq object. + * @nb: The notifier block to be unregistered. + -- + 2.24.1 + +The entire process only took a few minutes. Of course, I then found that +somebody else had fixed it in a separate tree, highlighting another lesson: +always check linux-next to see if a problem has been fixed before you dig +into it. + +Other fixes will take longer, especially those relating to structure +members or function parameters that lack documentation. In such cases, it +is necessary to work out what the role of those members or parameters is +and describe them correctly. Overall, this task gets a little tedious at +times, but it's highly important. If we can actually eliminate warnings +from the documentation build, then we can start expecting developers to +avoid adding new ones. + +Languishing kerneldoc comments +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Developers are encouraged to write kerneldoc comments for their code, but +many of those comments are never pulled into the docs build. That makes +this information harder to find and, for example, makes Sphinx unable to +generate links to that documentation. Adding ``kernel-doc`` directives to +the documentation to bring those comments in can help the community derive +the full value of the work that has gone into creating them. + +The ``scripts/find-unused-docs.sh`` tool can be used to find these +overlooked comments. + +Note that the most value comes from pulling in the documentation for +exported functions and data structures. Many subsystems also have +kerneldoc comments for internal use; those should not be pulled into the +documentation build unless they are placed in a document that is +specifically aimed at developers working within the relevant subsystem. + + +Typo fixes +~~~~~~~~~~ + +Fixing typographical or formatting errors in the documentation is a quick +way to figure out how to create and send patches, and it is a useful +service. I am always willing to accept such patches. That said, once you +have fixed a few, please consider moving on to more advanced tasks, leaving +some typos for the next beginner to address. + +Please note that some things are *not* typos and should not be "fixed": + + - Both American and British English spellings are allowed within the + kernel documentation. There is no need to fix one by replacing it with + the other. + + - The question of whether a period should be followed by one or two spaces + is not to be debated in the context of kernel documentation. Other + areas of rational disagreement, such as the "Oxford comma", are also + off-topic here. + +As with any patch to any project, please consider whether your change is +really making things better. + +Ancient documentation +~~~~~~~~~~~~~~~~~~~~~ + +Some kernel documentation is current, maintained, and useful. Some +documentation is ... not. Dusty, old, and inaccurate documentation can +mislead readers and casts doubt on our documentation as a whole. Anything +that can be done to address such problems is more than welcome. + +Whenever you are working with a document, please consider whether it is +current, whether it needs updating, or whether it should perhaps be removed +altogether. There are a number of warning signs that you can pay attention +to here: + + - References to 2.x kernels + - Pointers to SourceForge repositories + - Nothing but typo fixes in the history for several years + - Discussion of pre-Git workflows + +The best thing to do, of course, would be to bring the documentation +current, adding whatever information is needed. Such work often requires +the cooperation of developers familiar with the subsystem in question, of +course. Developers are often more than willing to cooperate with people +working to improve the documentation when asked nicely, and when their +answers are listened to and acted upon. + +Some documentation is beyond hope; we occasionally find documents that +refer to code that was removed from the kernel long ago, for example. +There is surprising resistance to removing obsolete documentation, but we +should do that anyway. Extra cruft in our documentation helps nobody. + +In cases where there is perhaps some useful information in a badly outdated +document, and you are unable to update it, the best thing to do may be to +add a warning at the beginning. The following text is recommended:: + + .. warning :: + This document is outdated and in need of attention. Please use + this information with caution, and please consider sending patches + to update it. + +That way, at least our long-suffering readers have been warned that the +document may lead them astray. + +Documentation coherency +~~~~~~~~~~~~~~~~~~~~~~~ + +The old-timers around here will remember the Linux books that showed up on +the shelves in the 1990s. They were simply collections of documentation +files scrounged from various locations on the net. The books have (mostly) +improved since then, but the kernel's documentation is still mostly built +on that model. It is thousands of files, almost each of which was written +in isolation from all of the others. We don't have a coherent body of +kernel documentation; we have thousands of individual documents. + +We have been trying to improve the situation through the creation of +a set of "books" that group documentation for specific readers. These +include: + + - :doc:`../admin-guide/index` + - :doc:`../core-api/index` + - :doc:`../driver-api/index` + - :doc:`../userspace-api/index` + +As well as this book on documentation itself. + +Moving documents into the appropriate books is an important task and needs +to continue. There are a couple of challenges associated with this work, +though. Moving documentation files creates short-term pain for the people +who work with those files; they are understandably unenthusiastic about +such changes. Usually the case can be made to move a document once; we +really don't want to keep shifting them around, though. + +Even when all documents are in the right place, though, we have only +managed to turn a big pile into a group of smaller piles. The work of +trying to knit all of those documents together into a single whole has not +yet begun. If you have bright ideas on how we could proceed on that front, +we would be more than happy to hear them. + +Stylesheet improvements +~~~~~~~~~~~~~~~~~~~~~~~ + +With the adoption of Sphinx we have much nicer-looking HTML output than we +once did. But it could still use a lot of improvement; Donald Knuth and +Edward Tufte would be unimpressed. That requires tweaking our stylesheets +to create more typographically sound, accessible, and readable output. + +Be warned: if you take on this task you are heading into classic bikeshed +territory. Expect a lot of opinions and discussion for even relatively +obvious changes. That is, alas, the nature of the world we live in. + +Non-LaTeX PDF build +~~~~~~~~~~~~~~~~~~~ + +This is a decidedly nontrivial task for somebody with a lot of time and +Python skills. The Sphinx toolchain is relatively small and well +contained; it is easy to add to a development system. But building PDF or +EPUB output requires installing LaTeX, which is anything but small or well +contained. That would be a nice thing to eliminate. + +The original hope had been to use the rst2pdf tool (https://rst2pdf.org/) +for PDF generation, but it turned out to not be up to the task. +Development work on rst2pdf seems to have picked up again in recent times, +though, which is a hopeful sign. If a suitably motivated developer were to +work with that project to make rst2pdf work with the kernel documentation +build, the world would be eternally grateful. + +Write more documentation +~~~~~~~~~~~~~~~~~~~~~~~~ + +Naturally, there are massive parts of the kernel that are severely +underdocumented. If you have the knowledge to document a specific kernel +subsystem and the desire to do so, please do not hesitate to do some +writing and contribute the result to the kernel. Untold numbers of kernel +developers and users will thank you. diff --git a/Documentation/doc-guide/index.rst b/Documentation/doc-guide/index.rst index 603f3ff55d5a..7c7d97784626 100644 --- a/Documentation/doc-guide/index.rst +++ b/Documentation/doc-guide/index.rst @@ -10,6 +10,8 @@ How to write kernel documentation sphinx kernel-doc parse-headers + contributing + maintainer-profile .. only:: subproject and html diff --git a/Documentation/doc-guide/maintainer-profile.rst b/Documentation/doc-guide/maintainer-profile.rst new file mode 100644 index 000000000000..aee2f508cc89 --- /dev/null +++ b/Documentation/doc-guide/maintainer-profile.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0 +Documentation subsystem maintainer entry profile +================================================ + +The documentation "subsystem" is the central coordinating point for the +kernel's documentation and associated infrastructure. It covers the +hierarchy under Documentation/ (with the exception of +Documentation/device-tree), various utilities under scripts/ and, at least +some of the time, LICENSES/. + +It's worth noting, though, that the boundaries of this subsystem are rather +fuzzier than normal. Many other subsystem maintainers like to keep control +of portions of Documentation/, and many more freely apply changes there +when it is convenient. Beyond that, much of the kernel's documentation is +found in the source as kerneldoc comments; those are usually (but not +always) maintained by the relevant subsystem maintainer. + +The mailing list for documentation is linux-doc@vger.kernel.org. Patches +should be made against the docs-next tree whenever possible. + +Submit checklist addendum +------------------------- + +When making documentation changes, you should actually build the +documentation and ensure that no new errors or warnings have been +introduced. Generating HTML documents and looking at the result will help +to avoid unsightly misunderstandings about how things will be rendered. + +Key cycle dates +--------------- + +Patches can be sent anytime, but response will be slower than usual during +the merge window. The docs tree tends to close late before the merge +window opens, since the risk of regressions from documentation patches is +low. + +Review cadence +-------------- + +I am the sole maintainer for the documentation subsystem, and I am doing +the work on my own time, so the response to patches will occasionally be +slow. I try to always send out a notification when a patch is merged (or +when I decide that one cannot be). Do not hesitate to send a ping if you +have not heard back within a week of sending a patch. diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst index e4f0859486c7..9f0016ee4cfb 100644 --- a/Documentation/driver-api/thermal/cpu-idle-cooling.rst +++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst @@ -65,6 +65,8 @@ We use a fixed duration of idle injection that gives an acceptable performance penalty and a fixed latency. Mitigation can be increased or decreased by modulating the duty cycle of the idle injection. +:: + ^ | | @@ -91,6 +93,8 @@ computed. The governor will change the cooling device state thus the duty cycle and this variation will modulate the cooling effect. +:: + ^ | | @@ -154,6 +158,7 @@ equation: P(opp)target = ((Trunning x (P(opp)running) + (Tidle x P(opp)idle)) / (Trunning + Tidle) + ... Tidle = Trunning x ((P(opp)running / P(opp)target) - 1) diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst index ebca41785abe..e57a3d1d085a 100644 --- a/Documentation/fb/fbcon.rst +++ b/Documentation/fb/fbcon.rst @@ -127,7 +127,7 @@ C. Boot options is typically located on the same video card. Thus, the consoles that are controlled by the VGA console will be garbled. -4. fbcon=rotate:<n> +5. fbcon=rotate:<n> This option changes the orientation angle of the console display. The value 'n' accepts the following: @@ -152,21 +152,21 @@ C. Boot options Actually, the underlying fb driver is totally ignorant of console rotation. -5. fbcon=margin:<color> +6. fbcon=margin:<color> This option specifies the color of the margins. The margins are the leftover area at the right and the bottom of the screen that are not used by text. By default, this area will be black. The 'color' value is an integer number that depends on the framebuffer driver being used. -6. fbcon=nodefer +7. fbcon=nodefer If the kernel is compiled with deferred fbcon takeover support, normally the framebuffer contents, left in place by the firmware/bootloader, will be preserved until there actually is some text is output to the console. This option causes fbcon to bind immediately to the fbdev device. -7. fbcon=logo-pos:<location> +8. fbcon=logo-pos:<location> The only possible 'location' is 'center' (without quotes), and when given, the bootup logo is moved from the default top-left corner @@ -174,6 +174,11 @@ C. Boot options displayed due to multiple CPUs, the collected line of logos is moved as a whole. +9. fbcon=logo-count:<n> + + The value 'n' overrides the number of bootup logos. 0 disables the + logo, and -1 gives the default which is the number of online CPUs. + C. Attaching, Detaching and Unloading Before going on to how to attach, detach and unload the framebuffer console, an diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst index 9c4e3fd39e6d..624d08fd2856 100644 --- a/Documentation/fb/modedb.rst +++ b/Documentation/fb/modedb.rst @@ -65,6 +65,9 @@ Valid options are:: - reflect_y (boolean): Perform an axial symmetry on the Y axis - rotate (integer): Rotate the initial framebuffer by x degrees. Valid values are 0, 90, 180 and 270. + - panel_orientation, one of "normal", "upside_down", "left_side_up", or + "right_side_up". For KMS drivers only, this sets the "panel orientation" + property on the kms connector as hint for kms users. ----------------------------------------------------------------------------- diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index cae7be2f7725..632a1c7aefa2 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -7,7 +7,7 @@ | arch |status| ----------------------- | alpha: | TODO | - | arc: | TODO | + | arc: | ok | | arm: | ok | | arm64: | ok | | c6x: | TODO | diff --git a/Documentation/filesystems/adfs.txt b/Documentation/filesystems/adfs.txt index 5949766353f7..0baa8e8c1fc1 100644 --- a/Documentation/filesystems/adfs.txt +++ b/Documentation/filesystems/adfs.txt @@ -1,3 +1,27 @@ +Filesystems supported by ADFS +----------------------------- + +The ADFS module supports the following Filecore formats which have: + +- new maps +- new directories or big directories + +In terms of the named formats, this means we support: + +- E and E+, with or without boot block +- F and F+ + +We fully support reading files from these filesystems, and writing to +existing files within their existing allocation. Essentially, we do +not support changing any of the filesystem metadata. + +This is intended to support loopback mounted Linux native filesystems +on a RISC OS Filecore filesystem, but will allow the data within files +to be changed. + +If write support (ADFS_FS_RW) is configured, we allow rudimentary +directory updates, specifically updating the access mode and timestamp. + Mount options for ADFS ---------------------- diff --git a/Documentation/filesystems/automount-support.txt b/Documentation/filesystems/automount-support.txt index b0afd3d55eaf..7d9f82607562 100644 --- a/Documentation/filesystems/automount-support.txt +++ b/Documentation/filesystems/automount-support.txt @@ -9,7 +9,7 @@ also be requested by userspace. IN-KERNEL AUTOMOUNTING ====================== -See section "Mount Traps" of Documentation/filesystems/autofs.txt +See section "Mount Traps" of Documentation/filesystems/autofs.rst Then from userspace, you can just do something like: diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 3135b80df6da..4eb3e2ddd00e 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -235,6 +235,17 @@ checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "en hide up to all remaining free space. The actual space that would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable This space is reclaimed once checkpoint=enable. +compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo" + and "lz4" algorithm. +compress_log_size=%u Support configuring compress cluster size, the size will + be 4KB * (1 << %u), 16KB is minimum size, also it's + default size. +compress_extension=%s Support adding specified extension, so that f2fs can enable + compression on those corresponding files, e.g. if all files + with '.ext' has high compression rate, we can set the '.ext' + on compression extension list and enable compression on + these file by default rather than to enable it via ioctl. + For other files, we can still enable compression via ioctl. ================================================================================ DEBUGFS ENTRIES @@ -259,170 +270,6 @@ The files in each per-device directory are shown in table below. Files in /sys/fs/f2fs/<devname> (see also Documentation/ABI/testing/sysfs-fs-f2fs) -.............................................................................. - File Content - - gc_urgent_sleep_time This parameter controls sleep time for gc_urgent. - 500 ms is set by default. See above gc_urgent. - - gc_min_sleep_time This tuning parameter controls the minimum sleep - time for the garbage collection thread. Time is - in milliseconds. - - gc_max_sleep_time This tuning parameter controls the maximum sleep - time for the garbage collection thread. Time is - in milliseconds. - - gc_no_gc_sleep_time This tuning parameter controls the default sleep - time for the garbage collection thread. Time is - in milliseconds. - - gc_idle This parameter controls the selection of victim - policy for garbage collection. Setting gc_idle = 0 - (default) will disable this option. Setting - gc_idle = 1 will select the Cost Benefit approach - & setting gc_idle = 2 will select the greedy approach. - - gc_urgent This parameter controls triggering background GCs - urgently or not. Setting gc_urgent = 0 [default] - makes back to default behavior, while if it is set - to 1, background thread starts to do GC by given - gc_urgent_sleep_time interval. - - reclaim_segments This parameter controls the number of prefree - segments to be reclaimed. If the number of prefree - segments is larger than the number of segments - in the proportion to the percentage over total - volume size, f2fs tries to conduct checkpoint to - reclaim the prefree segments to free segments. - By default, 5% over total # of segments. - - main_blkaddr This value gives the first block address of - MAIN area in the partition. - - max_small_discards This parameter controls the number of discard - commands that consist small blocks less than 2MB. - The candidates to be discarded are cached until - checkpoint is triggered, and issued during the - checkpoint. By default, it is disabled with 0. - - discard_granularity This parameter controls the granularity of discard - command size. It will issue discard commands iif - the size is larger than given granularity. Its - unit size is 4KB, and 4 (=16KB) is set by default. - The maximum value is 128 (=512KB). - - reserved_blocks This parameter indicates the number of blocks that - f2fs reserves internally for root. - - batched_trim_sections This parameter controls the number of sections - to be trimmed out in batch mode when FITRIM - conducts. 32 sections is set by default. - - ipu_policy This parameter controls the policy of in-place - updates in f2fs. There are five policies: - 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, - 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, - 0x10: F2FS_IPU_FSYNC. - - min_ipu_util This parameter controls the threshold to trigger - in-place-updates. The number indicates percentage - of the filesystem utilization, and used by - F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. - - min_fsync_blocks This parameter controls the threshold to trigger - in-place-updates when F2FS_IPU_FSYNC mode is set. - The number indicates the number of dirty pages - when fsync needs to flush on its call path. If - the number is less than this value, it triggers - in-place-updates. - - min_seq_blocks This parameter controls the threshold to serialize - write IOs issued by multiple threads in parallel. - - min_hot_blocks This parameter controls the threshold to allocate - a hot data log for pending data blocks to write. - - min_ssr_sections This parameter adds the threshold when deciding - SSR block allocation. If this is large, SSR mode - will be enabled early. - - ram_thresh This parameter controls the memory footprint used - by free nids and cached nat entries. By default, - 1 is set, which indicates 10 MB / 1 GB RAM. - - ra_nid_pages When building free nids, F2FS reads NAT blocks - ahead for speed up. Default is 0. - - dirty_nats_ratio Given dirty ratio of cached nat entries, F2FS - determines flushing them in background. - - max_victim_search This parameter controls the number of trials to - find a victim segment when conducting SSR and - cleaning operations. The default value is 4096 - which covers 8GB block address range. - - migration_granularity For large-sized sections, F2FS can stop GC given - this granularity instead of reclaiming entire - section. - - dir_level This parameter controls the directory level to - support large directory. If a directory has a - number of files, it can reduce the file lookup - latency by increasing this dir_level value. - Otherwise, it needs to decrease this value to - reduce the space overhead. The default value is 0. - - cp_interval F2FS tries to do checkpoint periodically, 60 secs - by default. - - idle_interval F2FS detects system is idle, if there's no F2FS - operations during given interval, 5 secs by - default. - - discard_idle_interval F2FS detects the discard thread is idle, given - time interval. Default is 5 secs. - - gc_idle_interval F2FS detects the GC thread is idle, given time - interval. Default is 5 secs. - - umount_discard_timeout When unmounting the disk, F2FS waits for finishing - queued discard commands which can take huge time. - This gives time out for it, 5 secs by default. - - iostat_enable This controls to enable/disable iostat in F2FS. - - readdir_ra This enables/disabled readahead of inode blocks - in readdir, and default is enabled. - - gc_pin_file_thresh This indicates how many GC can be failed for the - pinned file. If it exceeds this, F2FS doesn't - guarantee its pinning state. 2048 trials is set - by default. - - extension_list This enables to change extension_list for hot/cold - files in runtime. - - inject_rate This controls injection rate of arbitrary faults. - - inject_type This controls injection type of arbitrary faults. - - dirty_segments This shows # of dirty segments. - - lifetime_write_kbytes This shows # of data written to the disk. - - features This shows current features enabled on F2FS. - - current_reserved_blocks This shows # of blocks currently reserved. - - unusable If checkpoint=disable, this shows the number of - blocks that are unusable. - If checkpoint=enable it shows the number of blocks - that would be unusable if checkpoint=disable were - to be set. - -encoding This shows the encoding used for casefolding. - If casefolding is not enabled, returns (none) ================================================================================ USAGE @@ -840,3 +687,44 @@ zero or random data, which is useful to the below scenario where: 4. address = fibmap(fd, offset) 5. open(blkdev) 6. write(blkdev, address) + +Compression implementation +-------------------------- + +- New term named cluster is defined as basic unit of compression, file can +be divided into multiple clusters logically. One cluster includes 4 << n +(n >= 0) logical pages, compression size is also cluster size, each of +cluster can be compressed or not. + +- In cluster metadata layout, one special block address is used to indicate +cluster is compressed one or normal one, for compressed cluster, following +metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs +stores data including compress header and compressed data. + +- In order to eliminate write amplification during overwrite, F2FS only +support compression on write-once file, data can be compressed only when +all logical blocks in file are valid and cluster compress ratio is lower +than specified threshold. + +- To enable compression on regular inode, there are three ways: +* chattr +c file +* chattr +c dir; touch dir/file +* mount w/ -o compress_extension=ext; touch file.ext + +Compress metadata layout: + [Dnode Structure] + +-----------------------------------------------+ + | cluster 1 | cluster 2 | ......... | cluster N | + +-----------------------------------------------+ + . . . . + . . . . + . Compressed Cluster . . Normal Cluster . ++----------+---------+---------+---------+ +---------+---------+---------+---------+ +|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | ++----------+---------+---------+---------+ +---------+---------+---------+---------+ + . . + . . + . . + +-------------+-------------+----------+----------------------------+ + | data length | data chksum | reserved | compressed data | + +-------------+-------------+----------+----------------------------+ diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 01e909245fcd..bd9932344804 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -1016,9 +1016,9 @@ astute users may notice some differences in behavior: - Direct I/O is not supported on encrypted files. Attempts to use direct I/O on such files will fall back to buffered I/O. -- The fallocate operations FALLOC_FL_COLLAPSE_RANGE, - FALLOC_FL_INSERT_RANGE, and FALLOC_FL_ZERO_RANGE are not supported - on encrypted files and will fail with EOPNOTSUPP. +- The fallocate operations FALLOC_FL_COLLAPSE_RANGE and + FALLOC_FL_INSERT_RANGE are not supported on encrypted files and will + fail with EOPNOTSUPP. - Online defragmentation of encrypted files is not supported. The EXT4_IOC_MOVE_EXT and F2FS_IOC_MOVE_RANGE ioctls will fail with diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index ad6315a48d14..824a3ecbb0ca 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -47,4 +47,6 @@ Documentation for filesystem implementations. :maxdepth: 2 autofs + overlayfs virtiofs + vfat diff --git a/Documentation/filesystems/nfs/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt deleted file mode 100644 index 22dc0dd6889c..000000000000 --- a/Documentation/filesystems/nfs/nfs-rdma.txt +++ /dev/null @@ -1,274 +0,0 @@ -################################################################################ -# # -# NFS/RDMA README # -# # -################################################################################ - - Author: NetApp and Open Grid Computing - Date: May 29, 2008 - -Table of Contents -~~~~~~~~~~~~~~~~~ - - Overview - - Getting Help - - Installation - - Check RDMA and NFS Setup - - NFS/RDMA Setup - -Overview -~~~~~~~~ - - This document describes how to install and setup the Linux NFS/RDMA client - and server software. - - The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server - was first included in the following release, Linux 2.6.25. - - In our testing, we have obtained excellent performance results (full 10Gbit - wire bandwidth at minimal client CPU) under many workloads. The code passes - the full Connectathon test suite and operates over both Infiniband and iWARP - RDMA adapters. - -Getting Help -~~~~~~~~~~~~ - - If you get stuck, you can ask questions on the - - nfs-rdma-devel@lists.sourceforge.net - - mailing list. - -Installation -~~~~~~~~~~~~ - - These instructions are a step by step guide to building a machine for - use with NFS/RDMA. - - - Install an RDMA device - - Any device supported by the drivers in drivers/infiniband/hw is acceptable. - - Testing has been performed using several Mellanox-based IB cards, the - Ammasso AMS1100 iWARP adapter, and the Chelsio cxgb3 iWARP adapter. - - - Install a Linux distribution and tools - - The first kernel release to contain both the NFS/RDMA client and server was - Linux 2.6.25 Therefore, a distribution compatible with this and subsequent - Linux kernel release should be installed. - - The procedures described in this document have been tested with - distributions from Red Hat's Fedora Project (http://fedora.redhat.com/). - - - Install nfs-utils-1.1.2 or greater on the client - - An NFS/RDMA mount point can be obtained by using the mount.nfs command in - nfs-utils-1.1.2 or greater (nfs-utils-1.1.1 was the first nfs-utils - version with support for NFS/RDMA mounts, but for various reasons we - recommend using nfs-utils-1.1.2 or greater). To see which version of - mount.nfs you are using, type: - - $ /sbin/mount.nfs -V - - If the version is less than 1.1.2 or the command does not exist, - you should install the latest version of nfs-utils. - - Download the latest package from: - - http://www.kernel.org/pub/linux/utils/nfs - - Uncompress the package and follow the installation instructions. - - If you will not need the idmapper and gssd executables (you do not need - these to create an NFS/RDMA enabled mount command), the installation - process can be simplified by disabling these features when running - configure: - - $ ./configure --disable-gss --disable-nfsv4 - - To build nfs-utils you will need the tcp_wrappers package installed. For - more information on this see the package's README and INSTALL files. - - After building the nfs-utils package, there will be a mount.nfs binary in - the utils/mount directory. This binary can be used to initiate NFS v2, v3, - or v4 mounts. To initiate a v4 mount, the binary must be called - mount.nfs4. The standard technique is to create a symlink called - mount.nfs4 to mount.nfs. - - This mount.nfs binary should be installed at /sbin/mount.nfs as follows: - - $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs - - In this location, mount.nfs will be invoked automatically for NFS mounts - by the system mount command. - - NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed - on the NFS client machine. You do not need this specific version of - nfs-utils on the server. Furthermore, only the mount.nfs command from - nfs-utils-1.1.2 is needed on the client. - - - Install a Linux kernel with NFS/RDMA - - The NFS/RDMA client and server are both included in the mainline Linux - kernel version 2.6.25 and later. This and other versions of the Linux - kernel can be found at: - - https://www.kernel.org/pub/linux/kernel/ - - Download the sources and place them in an appropriate location. - - - Configure the RDMA stack - - Make sure your kernel configuration has RDMA support enabled. Under - Device Drivers -> InfiniBand support, update the kernel configuration - to enable InfiniBand support [NOTE: the option name is misleading. Enabling - InfiniBand support is required for all RDMA devices (IB, iWARP, etc.)]. - - Enable the appropriate IB HCA support (mlx4, mthca, ehca, ipath, etc.) or - iWARP adapter support (amso, cxgb3, etc.). - - If you are using InfiniBand, be sure to enable IP-over-InfiniBand support. - - - Configure the NFS client and server - - Your kernel configuration must also have NFS file system support and/or - NFS server support enabled. These and other NFS related configuration - options can be found under File Systems -> Network File Systems. - - - Build, install, reboot - - The NFS/RDMA code will be enabled automatically if NFS and RDMA - are turned on. The NFS/RDMA client and server are configured via the hidden - SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The - value of SUNRPC_XPRT_RDMA will be: - - - N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client - and server will not be built - - M if both SUNRPC and INFINIBAND are on (M or Y) and at least one is M, - in this case the NFS/RDMA client and server will be built as modules - - Y if both SUNRPC and INFINIBAND are Y, in this case the NFS/RDMA client - and server will be built into the kernel - - Therefore, if you have followed the steps above and turned no NFS and RDMA, - the NFS/RDMA client and server will be built. - - Build a new kernel, install it, boot it. - -Check RDMA and NFS Setup -~~~~~~~~~~~~~~~~~~~~~~~~ - - Before configuring the NFS/RDMA software, it is a good idea to test - your new kernel to ensure that the kernel is working correctly. - In particular, it is a good idea to verify that the RDMA stack - is functioning as expected and standard NFS over TCP/IP and/or UDP/IP - is working properly. - - - Check RDMA Setup - - If you built the RDMA components as modules, load them at - this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel - card: - - $ modprobe ib_mthca - $ modprobe ib_ipoib - - If you are using InfiniBand, make sure there is a Subnet Manager (SM) - running on the network. If your IB switch has an embedded SM, you can - use it. Otherwise, you will need to run an SM, such as OpenSM, on one - of your end nodes. - - If an SM is running on your network, you should see the following: - - $ cat /sys/class/infiniband/driverX/ports/1/state - 4: ACTIVE - - where driverX is mthca0, ipath5, ehca3, etc. - - To further test the InfiniBand software stack, use IPoIB (this - assumes you have two IB hosts named host1 and host2): - - host1$ ip link set dev ib0 up - host1$ ip address add dev ib0 a.b.c.x - host2$ ip link set dev ib0 up - host2$ ip address add dev ib0 a.b.c.y - host1$ ping a.b.c.y - host2$ ping a.b.c.x - - For other device types, follow the appropriate procedures. - - - Check NFS Setup - - For the NFS components enabled above (client and/or server), - test their functionality over standard Ethernet using TCP/IP or UDP/IP. - -NFS/RDMA Setup -~~~~~~~~~~~~~~ - - We recommend that you use two machines, one to act as the client and - one to act as the server. - - One time configuration: - - - On the server system, configure the /etc/exports file and - start the NFS/RDMA server. - - Exports entries with the following formats have been tested: - - /vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash) - /vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash) - - The IP address(es) is(are) the client's IPoIB address for an InfiniBand - HCA or the client's iWARP address(es) for an RNIC. - - NOTE: The "insecure" option must be used because the NFS/RDMA client does - not use a reserved port. - - Each time a machine boots: - - - Load and configure the RDMA drivers - - For InfiniBand using a Mellanox adapter: - - $ modprobe ib_mthca - $ modprobe ib_ipoib - $ ip li set dev ib0 up - $ ip addr add dev ib0 a.b.c.d - - NOTE: use unique addresses for the client and server - - - Start the NFS server - - If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in - kernel config), load the RDMA transport module: - - $ modprobe svcrdma - - Regardless of how the server was built (module or built-in), start the - server: - - $ /etc/init.d/nfs start - - or - - $ service nfs start - - Instruct the server to listen on the RDMA transport: - - $ echo rdma 20049 > /proc/fs/nfsd/portlist - - - On the client system - - If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in - kernel config), load the RDMA client module: - - $ modprobe xprtrdma.ko - - Regardless of how the client was built (module or built-in), use this - command to mount the NFS/RDMA server: - - $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt - - To verify that the mount is using RDMA, run "cat /proc/mounts" and check - the "proto" field for the given mount. - - Congratulations! You're using NFS/RDMA! diff --git a/Documentation/filesystems/path-lookup.rst b/Documentation/filesystems/path-lookup.rst index 434a07b0002b..a3216979298b 100644 --- a/Documentation/filesystems/path-lookup.rst +++ b/Documentation/filesystems/path-lookup.rst @@ -13,6 +13,7 @@ It has subsequently been updated to reflect changes in the kernel including: - per-directory parallel name lookup. +- ``openat2()`` resolution restriction flags. Introduction to pathname lookup =============================== @@ -235,6 +236,13 @@ renamed. If ``d_lookup`` finds that a rename happened while it unsuccessfully scanned a chain in the hash table, it simply tries again. +``rename_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``rename_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + inode->i_rwsem ~~~~~~~~~~~~~~ @@ -348,6 +356,13 @@ any changes to any mount points while stepping up. This locking is needed to stabilize the link to the mounted-on dentry, which the refcount on the mount itself doesn't ensure. +``mount_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``mount_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + RCU ~~~ @@ -405,6 +420,10 @@ is requested. Keeping a reference in the ``nameidata`` ensures that only one root is in effect for the entire path walk, even if it races with a ``chroot()`` system call. +It should be noted that in the case of ``LOOKUP_IN_ROOT`` or +``LOOKUP_BENEATH``, the effective root becomes the directory file descriptor +passed to ``openat2()`` (which exposes these ``LOOKUP_`` flags). + The root is needed when either of two conditions holds: (1) either the pathname or a symbolic link starts with a "'/'", or (2) a "``..``" component is being handled, since "``..``" from the root must always stay @@ -1149,7 +1168,7 @@ so ``NULL`` is returned to indicate that the symlink can be released and the stack frame discarded. The other case involves things in ``/proc`` that look like symlinks but -aren't really:: +aren't really (and are therefore commonly referred to as "magic-links"):: $ ls -l /proc/self/fd/1 lrwx------ 1 neilb neilb 64 Jun 13 10:19 /proc/self/fd/1 -> /dev/pts/4 @@ -1286,7 +1305,9 @@ A few flags A suitable way to wrap up this tour of pathname walking is to list the various flags that can be stored in the ``nameidata`` to guide the lookup process. Many of these are only meaningful on the final -component, others reflect the current state of the pathname lookup. +component, others reflect the current state of the pathname lookup, and some +apply restrictions to all path components encountered in the path lookup. + And then there is ``LOOKUP_EMPTY``, which doesn't fit conceptually with the others. If this is not set, an empty pathname causes an error very early on. If it is set, empty pathnames are not considered to be @@ -1310,13 +1331,48 @@ longer needed. ``LOOKUP_JUMPED`` means that the current dentry was chosen not because it had the right name but for some other reason. This happens when following "``..``", following a symlink to ``/``, crossing a mount point -or accessing a "``/proc/$PID/fd/$FD``" symlink. In this case the -filesystem has not been asked to revalidate the name (with -``d_revalidate()``). In such cases the inode may still need to be -revalidated, so ``d_op->d_weak_revalidate()`` is called if +or accessing a "``/proc/$PID/fd/$FD``" symlink (also known as a "magic +link"). In this case the filesystem has not been asked to revalidate the +name (with ``d_revalidate()``). In such cases the inode may still need +to be revalidated, so ``d_op->d_weak_revalidate()`` is called if ``LOOKUP_JUMPED`` is set when the look completes - which may be at the final component or, when creating, unlinking, or renaming, at the penultimate component. +Resolution-restriction flags +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to allow userspace to protect itself against certain race conditions +and attack scenarios involving changing path components, a series of flags are +available which apply restrictions to all path components encountered during +path lookup. These flags are exposed through ``openat2()``'s ``resolve`` field. + +``LOOKUP_NO_SYMLINKS`` blocks all symlink traversals (including magic-links). +This is distinctly different from ``LOOKUP_FOLLOW``, because the latter only +relates to restricting the following of trailing symlinks. + +``LOOKUP_NO_MAGICLINKS`` blocks all magic-link traversals. Filesystems must +ensure that they return errors from ``nd_jump_link()``, because that is how +``LOOKUP_NO_MAGICLINKS`` and other magic-link restrictions are implemented. + +``LOOKUP_NO_XDEV`` blocks all ``vfsmount`` traversals (this includes both +bind-mounts and ordinary mounts). Note that the ``vfsmount`` which contains the +lookup is determined by the first mountpoint the path lookup reaches -- +absolute paths start with the ``vfsmount`` of ``/``, and relative paths start +with the ``dfd``'s ``vfsmount``. Magic-links are only permitted if the +``vfsmount`` of the path is unchanged. + +``LOOKUP_BENEATH`` blocks any path components which resolve outside the +starting point of the resolution. This is done by blocking ``nd_jump_root()`` +as well as blocking ".." if it would jump outside the starting point. +``rename_lock`` and ``mount_lock`` are used to detect attacks against the +resolution of "..". Magic-links are also blocked. + +``LOOKUP_IN_ROOT`` resolves all path components as though the starting point +were the filesystem root. ``nd_jump_root()`` brings the resolution back to to +the starting point, and ".." at the starting point will act as a no-op. As with +``LOOKUP_BENEATH``, ``rename_lock`` and ``mount_lock`` are used to detect +attacks against ".." resolution. Magic-links are also blocked. + Final-component flags ~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/filesystems/vfat.rst b/Documentation/filesystems/vfat.rst new file mode 100644 index 000000000000..e85d74e91295 --- /dev/null +++ b/Documentation/filesystems/vfat.rst @@ -0,0 +1,387 @@ +==== +VFAT +==== + +USING VFAT +========== + +To use the vfat filesystem, use the filesystem type 'vfat'. i.e.:: + + mount -t vfat /dev/fd0 /mnt + + +No special partition formatter is required, +'mkdosfs' will work fine if you want to format from within Linux. + +VFAT MOUNT OPTIONS +================== + +**uid=###** + Set the owner of all files on this filesystem. + The default is the uid of current process. + +**gid=###** + Set the group of all files on this filesystem. + The default is the gid of current process. + +**umask=###** + The permission mask (for files and directories, see *umask(1)*). + The default is the umask of current process. + +**dmask=###** + The permission mask for the directory. + The default is the umask of current process. + +**fmask=###** + The permission mask for files. + The default is the umask of current process. + +**allow_utime=###** + This option controls the permission check of mtime/atime. + + **-20**: If current process is in group of file's group ID, + you can change timestamp. + + **-2**: Other users can change timestamp. + + The default is set from dmask option. If the directory is + writable, utime(2) is also allowed. i.e. ~dmask & 022. + + Normally utime(2) checks current process is owner of + the file, or it has CAP_FOWNER capability. But FAT + filesystem doesn't have uid/gid on disk, so normal + check is too unflexible. With this option you can + relax it. + +**codepage=###** + Sets the codepage number for converting to shortname + characters on FAT filesystem. + By default, FAT_DEFAULT_CODEPAGE setting is used. + +**iocharset=<name>** + Character set to use for converting between the + encoding is used for user visible filename and 16 bit + Unicode characters. Long filenames are stored on disk + in Unicode format, but Unix for the most part doesn't + know how to deal with Unicode. + By default, FAT_DEFAULT_IOCHARSET setting is used. + + There is also an option of doing UTF-8 translations + with the utf8 option. + +.. note:: ``iocharset=utf8`` is not recommended. If unsure, you should consider + the utf8 option instead. + +**utf8=<bool>** + UTF-8 is the filesystem safe version of Unicode that + is used by the console. It can be enabled or disabled + for the filesystem with this option. + If 'uni_xlate' gets set, UTF-8 gets disabled. + By default, FAT_DEFAULT_UTF8 setting is used. + +**uni_xlate=<bool>** + Translate unhandled Unicode characters to special + escaped sequences. This would let you backup and + restore filenames that are created with any Unicode + characters. Until Linux supports Unicode for real, + this gives you an alternative. Without this option, + a '?' is used when no translation is possible. The + escape character is ':' because it is otherwise + illegal on the vfat filesystem. The escape sequence + that gets used is ':' and the four digits of hexadecimal + unicode. + +**nonumtail=<bool>** + When creating 8.3 aliases, normally the alias will + end in '~1' or tilde followed by some number. If this + option is set, then if the filename is + "longfilename.txt" and "longfile.txt" does not + currently exist in the directory, longfile.txt will + be the short alias instead of longfi~1.txt. + +**usefree** + Use the "free clusters" value stored on FSINFO. It will + be used to determine number of free clusters without + scanning disk. But it's not used by default, because + recent Windows don't update it correctly in some + case. If you are sure the "free clusters" on FSINFO is + correct, by this option you can avoid scanning disk. + +**quiet** + Stops printing certain warning messages. + +**check=s|r|n** + Case sensitivity checking setting. + + **s**: strict, case sensitive + + **r**: relaxed, case insensitive + + **n**: normal, default setting, currently case insensitive + +**nocase** + This was deprecated for vfat. Use ``shortname=win95`` instead. + +**shortname=lower|win95|winnt|mixed** + Shortname display/create setting. + + **lower**: convert to lowercase for display, + emulate the Windows 95 rule for create. + + **win95**: emulate the Windows 95 rule for display/create. + + **winnt**: emulate the Windows NT rule for display/create. + + **mixed**: emulate the Windows NT rule for display, + emulate the Windows 95 rule for create. + + Default setting is `mixed`. + +**tz=UTC** + Interpret timestamps as UTC rather than local time. + This option disables the conversion of timestamps + between local time (as used by Windows on FAT) and UTC + (which Linux uses internally). This is particularly + useful when mounting devices (like digital cameras) + that are set to UTC in order to avoid the pitfalls of + local time. + +**time_offset=minutes** + Set offset for conversion of timestamps from local time + used by FAT to UTC. I.e. <minutes> minutes will be subtracted + from each timestamp to convert it to UTC used internally by + Linux. This is useful when time zone set in ``sys_tz`` is + not the time zone used by the filesystem. Note that this + option still does not provide correct time stamps in all + cases in presence of DST - time stamps in a different DST + setting will be off by one hour. + +**showexec** + If set, the execute permission bits of the file will be + allowed only if the extension part of the name is .EXE, + .COM, or .BAT. Not set by default. + +**debug** + Can be set, but unused by the current implementation. + +**sys_immutable** + If set, ATTR_SYS attribute on FAT is handled as + IMMUTABLE flag on Linux. Not set by default. + +**flush** + If set, the filesystem will try to flush to disk more + early than normal. Not set by default. + +**rodir** + FAT has the ATTR_RO (read-only) attribute. On Windows, + the ATTR_RO of the directory will just be ignored, + and is used only by applications as a flag (e.g. it's set + for the customized folder). + + If you want to use ATTR_RO as read-only flag even for + the directory, set this option. + +**errors=panic|continue|remount-ro** + specify FAT behavior on critical errors: panic, continue + without doing anything or remount the partition in + read-only mode (default behavior). + +**discard** + If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +**nfs=stale_rw|nostale_ro** + Enable this only if you want to export the FAT filesystem + over NFS. + + **stale_rw**: This option maintains an index (cache) of directory + *inodes* by *i_logstart* which is used by the nfs-related code to + improve look-ups. Full file operations (read/write) over NFS is + supported but with cache eviction at NFS server, this could + result in ESTALE issues. + + **nostale_ro**: This option bases the *inode* number and filehandle + on the on-disk location of a file in the MS-DOS directory entry. + This ensures that ESTALE will not be returned after a file is + evicted from the inode cache. However, it means that operations + such as rename, create and unlink could cause filehandles that + previously pointed at one file to point at a different file, + potentially causing data corruption. For this reason, this + option also mounts the filesystem readonly. + + To maintain backward compatibility, ``'-o nfs'`` is also accepted, + defaulting to "stale_rw". + +**dos1xfloppy <bool>: 0,1,yes,no,true,false** + If set, use a fallback default BIOS Parameter Block + configuration, determined by backing device size. These static + parameters match defaults assumed by DOS 1.x for 160 kiB, + 180 kiB, 320 kiB, and 360 kiB floppies and floppy images. + + + +LIMITATION +========== + +The fallocated region of file is discarded at umount/evict time +when using fallocate with FALLOC_FL_KEEP_SIZE. +So, User should assume that fallocated region can be discarded at +last close if there is memory pressure resulting in eviction of +the inode from the memory. As a result, for any dependency on +the fallocated region, user should make sure to recheck fallocate +after reopening the file. + +TODO +==== +Need to get rid of the raw scanning stuff. Instead, always use +a get next directory entry approach. The only thing left that uses +raw scanning is the directory renaming code. + + +POSSIBLE PROBLEMS +================= + +- vfat_valid_longname does not properly checked reserved names. +- When a volume name is the same as a directory name in the root + directory of the filesystem, the directory name sometimes shows + up as an empty file. +- autoconv option does not work correctly. + + +TEST SUITE +========== +If you plan to make any modifications to the vfat filesystem, please +get the test suite that comes with the vfat distribution at + +`<http://web.archive.org/web/*/http://bmrc.berkeley.edu/people/chaffee/vfat.html>`_ + +This tests quite a few parts of the vfat filesystem and additional +tests for new features or untested features would be appreciated. + +NOTES ON THE STRUCTURE OF THE VFAT FILESYSTEM +============================================= +This documentation was provided by Galen C. Hunt gchunt@cs.rochester.edu and +lightly annotated by Gordon Chaffee. + +This document presents a very rough, technical overview of my +knowledge of the extended FAT file system used in Windows NT 3.5 and +Windows 95. I don't guarantee that any of the following is correct, +but it appears to be so. + +The extended FAT file system is almost identical to the FAT +file system used in DOS versions up to and including *6.223410239847* +:-). The significant change has been the addition of long file names. +These names support up to 255 characters including spaces and lower +case characters as opposed to the traditional 8.3 short names. + +Here is the description of the traditional FAT entry in the current +Windows 95 filesystem:: + + struct directory { // Short 8.3 names + unsigned char name[8]; // file name + unsigned char ext[3]; // file extension + unsigned char attr; // attribute byte + unsigned char lcase; // Case for base and extension + unsigned char ctime_ms; // Creation time, milliseconds + unsigned char ctime[2]; // Creation time + unsigned char cdate[2]; // Creation date + unsigned char adate[2]; // Last access date + unsigned char reserved[2]; // reserved values (ignored) + unsigned char time[2]; // time stamp + unsigned char date[2]; // date stamp + unsigned char start[2]; // starting cluster number + unsigned char size[4]; // size of the file + }; + + +The lcase field specifies if the base and/or the extension of an 8.3 +name should be capitalized. This field does not seem to be used by +Windows 95 but it is used by Windows NT. The case of filenames is not +completely compatible from Windows NT to Windows 95. It is not completely +compatible in the reverse direction, however. Filenames that fit in +the 8.3 namespace and are written on Windows NT to be lowercase will +show up as uppercase on Windows 95. + +.. note:: Note that the ``start`` and ``size`` values are actually little + endian integer values. The descriptions of the fields in this + structure are public knowledge and can be found elsewhere. + +With the extended FAT system, Microsoft has inserted extra +directory entries for any files with extended names. (Any name which +legally fits within the old 8.3 encoding scheme does not have extra +entries.) I call these extra entries slots. Basically, a slot is a +specially formatted directory entry which holds up to 13 characters of +a file's extended name. Think of slots as additional labeling for the +directory entry of the file to which they correspond. Microsoft +prefers to refer to the 8.3 entry for a file as its alias and the +extended slot directory entries as the file name. + +The C structure for a slot directory entry follows:: + + struct slot { // Up to 13 characters of a long name + unsigned char id; // sequence number for slot + unsigned char name0_4[10]; // first 5 characters in name + unsigned char attr; // attribute byte + unsigned char reserved; // always 0 + unsigned char alias_checksum; // checksum for 8.3 alias + unsigned char name5_10[12]; // 6 more characters in name + unsigned char start[2]; // starting cluster number + unsigned char name11_12[4]; // last 2 characters in name + }; + + +If the layout of the slots looks a little odd, it's only +because of Microsoft's efforts to maintain compatibility with old +software. The slots must be disguised to prevent old software from +panicking. To this end, a number of measures are taken: + + 1) The attribute byte for a slot directory entry is always set + to 0x0f. This corresponds to an old directory entry with + attributes of "hidden", "system", "read-only", and "volume + label". Most old software will ignore any directory + entries with the "volume label" bit set. Real volume label + entries don't have the other three bits set. + + 2) The starting cluster is always set to 0, an impossible + value for a DOS file. + +Because the extended FAT system is backward compatible, it is +possible for old software to modify directory entries. Measures must +be taken to ensure the validity of slots. An extended FAT system can +verify that a slot does in fact belong to an 8.3 directory entry by +the following: + + 1) Positioning. Slots for a file always immediately proceed + their corresponding 8.3 directory entry. In addition, each + slot has an id which marks its order in the extended file + name. Here is a very abbreviated view of an 8.3 directory + entry and its corresponding long name slots for the file + "My Big File.Extension which is long":: + + <proceeding files...> + <slot #3, id = 0x43, characters = "h is long"> + <slot #2, id = 0x02, characters = "xtension whic"> + <slot #1, id = 0x01, characters = "My Big File.E"> + <directory entry, name = "MYBIGFIL.EXT"> + + + .. note:: Note that the slots are stored from last to first. Slots + are numbered from 1 to N. The Nth slot is ``or'ed`` with + 0x40 to mark it as the last one. + + 2) Checksum. Each slot has an alias_checksum value. The + checksum is calculated from the 8.3 name using the + following algorithm:: + + for (sum = i = 0; i < 11; i++) { + sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + name[i] + } + + + 3) If there is free space in the final slot, a Unicode ``NULL (0x0000)`` + is stored after the final character. After that, all unused + characters in the final slot are set to Unicode 0xFFFF. + +Finally, note that the extended name is stored in Unicode. Each Unicode +character takes either two or four bytes, UTF-16LE encoded. diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt deleted file mode 100644 index 91031298beb1..000000000000 --- a/Documentation/filesystems/vfat.txt +++ /dev/null @@ -1,347 +0,0 @@ -USING VFAT ----------------------------------------------------------------------- -To use the vfat filesystem, use the filesystem type 'vfat'. i.e. - mount -t vfat /dev/fd0 /mnt - -No special partition formatter is required. mkdosfs will work fine -if you want to format from within Linux. - -VFAT MOUNT OPTIONS ----------------------------------------------------------------------- -uid=### -- Set the owner of all files on this filesystem. - The default is the uid of current process. - -gid=### -- Set the group of all files on this filesystem. - The default is the gid of current process. - -umask=### -- The permission mask (for files and directories, see umask(1)). - The default is the umask of current process. - -dmask=### -- The permission mask for the directory. - The default is the umask of current process. - -fmask=### -- The permission mask for files. - The default is the umask of current process. - -allow_utime=### -- This option controls the permission check of mtime/atime. - - 20 - If current process is in group of file's group ID, - you can change timestamp. - 2 - Other users can change timestamp. - - The default is set from `dmask' option. (If the directory is - writable, utime(2) is also allowed. I.e. ~dmask & 022) - - Normally utime(2) checks current process is owner of - the file, or it has CAP_FOWNER capability. But FAT - filesystem doesn't have uid/gid on disk, so normal - check is too unflexible. With this option you can - relax it. - -codepage=### -- Sets the codepage number for converting to shortname - characters on FAT filesystem. - By default, FAT_DEFAULT_CODEPAGE setting is used. - -iocharset=<name> -- Character set to use for converting between the - encoding is used for user visible filename and 16 bit - Unicode characters. Long filenames are stored on disk - in Unicode format, but Unix for the most part doesn't - know how to deal with Unicode. - By default, FAT_DEFAULT_IOCHARSET setting is used. - - There is also an option of doing UTF-8 translations - with the utf8 option. - - NOTE: "iocharset=utf8" is not recommended. If unsure, - you should consider the following option instead. - -utf8=<bool> -- UTF-8 is the filesystem safe version of Unicode that - is used by the console. It can be enabled or disabled - for the filesystem with this option. - If 'uni_xlate' gets set, UTF-8 gets disabled. - By default, FAT_DEFAULT_UTF8 setting is used. - -uni_xlate=<bool> -- Translate unhandled Unicode characters to special - escaped sequences. This would let you backup and - restore filenames that are created with any Unicode - characters. Until Linux supports Unicode for real, - this gives you an alternative. Without this option, - a '?' is used when no translation is possible. The - escape character is ':' because it is otherwise - illegal on the vfat filesystem. The escape sequence - that gets used is ':' and the four digits of hexadecimal - unicode. - -nonumtail=<bool> -- When creating 8.3 aliases, normally the alias will - end in '~1' or tilde followed by some number. If this - option is set, then if the filename is - "longfilename.txt" and "longfile.txt" does not - currently exist in the directory, 'longfile.txt' will - be the short alias instead of 'longfi~1.txt'. - -usefree -- Use the "free clusters" value stored on FSINFO. It'll - be used to determine number of free clusters without - scanning disk. But it's not used by default, because - recent Windows don't update it correctly in some - case. If you are sure the "free clusters" on FSINFO is - correct, by this option you can avoid scanning disk. - -quiet -- Stops printing certain warning messages. - -check=s|r|n -- Case sensitivity checking setting. - s: strict, case sensitive - r: relaxed, case insensitive - n: normal, default setting, currently case insensitive - -nocase -- This was deprecated for vfat. Use shortname=win95 instead. - -shortname=lower|win95|winnt|mixed - -- Shortname display/create setting. - lower: convert to lowercase for display, - emulate the Windows 95 rule for create. - win95: emulate the Windows 95 rule for display/create. - winnt: emulate the Windows NT rule for display/create. - mixed: emulate the Windows NT rule for display, - emulate the Windows 95 rule for create. - Default setting is `mixed'. - -tz=UTC -- Interpret timestamps as UTC rather than local time. - This option disables the conversion of timestamps - between local time (as used by Windows on FAT) and UTC - (which Linux uses internally). This is particularly - useful when mounting devices (like digital cameras) - that are set to UTC in order to avoid the pitfalls of - local time. -time_offset=minutes - -- Set offset for conversion of timestamps from local time - used by FAT to UTC. I.e. <minutes> minutes will be subtracted - from each timestamp to convert it to UTC used internally by - Linux. This is useful when time zone set in sys_tz is - not the time zone used by the filesystem. Note that this - option still does not provide correct time stamps in all - cases in presence of DST - time stamps in a different DST - setting will be off by one hour. - -showexec -- If set, the execute permission bits of the file will be - allowed only if the extension part of the name is .EXE, - .COM, or .BAT. Not set by default. - -debug -- Can be set, but unused by the current implementation. - -sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as - IMMUTABLE flag on Linux. Not set by default. - -flush -- If set, the filesystem will try to flush to disk more - early than normal. Not set by default. - -rodir -- FAT has the ATTR_RO (read-only) attribute. On Windows, - the ATTR_RO of the directory will just be ignored, - and is used only by applications as a flag (e.g. it's set - for the customized folder). - - If you want to use ATTR_RO as read-only flag even for - the directory, set this option. - -errors=panic|continue|remount-ro - -- specify FAT behavior on critical errors: panic, continue - without doing anything or remount the partition in - read-only mode (default behavior). - -discard -- If set, issues discard/TRIM commands to the block - device when blocks are freed. This is useful for SSD devices - and sparse/thinly-provisoned LUNs. - -nfs=stale_rw|nostale_ro - Enable this only if you want to export the FAT filesystem - over NFS. - - stale_rw: This option maintains an index (cache) of directory - inodes by i_logstart which is used by the nfs-related code to - improve look-ups. Full file operations (read/write) over NFS is - supported but with cache eviction at NFS server, this could - result in ESTALE issues. - - nostale_ro: This option bases the inode number and filehandle - on the on-disk location of a file in the MS-DOS directory entry. - This ensures that ESTALE will not be returned after a file is - evicted from the inode cache. However, it means that operations - such as rename, create and unlink could cause filehandles that - previously pointed at one file to point at a different file, - potentially causing data corruption. For this reason, this - option also mounts the filesystem readonly. - - To maintain backward compatibility, '-o nfs' is also accepted, - defaulting to stale_rw - -dos1xfloppy -- If set, use a fallback default BIOS Parameter Block - configuration, determined by backing device size. These static - parameters match defaults assumed by DOS 1.x for 160 kiB, - 180 kiB, 320 kiB, and 360 kiB floppies and floppy images. - - -<bool>: 0,1,yes,no,true,false - -LIMITATION ---------------------------------------------------------------------- -* The fallocated region of file is discarded at umount/evict time - when using fallocate with FALLOC_FL_KEEP_SIZE. - So, User should assume that fallocated region can be discarded at - last close if there is memory pressure resulting in eviction of - the inode from the memory. As a result, for any dependency on - the fallocated region, user should make sure to recheck fallocate - after reopening the file. - -TODO ----------------------------------------------------------------------- -* Need to get rid of the raw scanning stuff. Instead, always use - a get next directory entry approach. The only thing left that uses - raw scanning is the directory renaming code. - - -POSSIBLE PROBLEMS ----------------------------------------------------------------------- -* vfat_valid_longname does not properly checked reserved names. -* When a volume name is the same as a directory name in the root - directory of the filesystem, the directory name sometimes shows - up as an empty file. -* autoconv option does not work correctly. - -BUG REPORTS ----------------------------------------------------------------------- -If you have trouble with the VFAT filesystem, mail bug reports to -chaffee@bmrc.cs.berkeley.edu. Please specify the filename -and the operation that gave you trouble. - -TEST SUITE ----------------------------------------------------------------------- -If you plan to make any modifications to the vfat filesystem, please -get the test suite that comes with the vfat distribution at - - http://web.archive.org/web/*/http://bmrc.berkeley.edu/ - people/chaffee/vfat.html - -This tests quite a few parts of the vfat filesystem and additional -tests for new features or untested features would be appreciated. - -NOTES ON THE STRUCTURE OF THE VFAT FILESYSTEM ----------------------------------------------------------------------- -(This documentation was provided by Galen C. Hunt <gchunt@cs.rochester.edu> - and lightly annotated by Gordon Chaffee). - -This document presents a very rough, technical overview of my -knowledge of the extended FAT file system used in Windows NT 3.5 and -Windows 95. I don't guarantee that any of the following is correct, -but it appears to be so. - -The extended FAT file system is almost identical to the FAT -file system used in DOS versions up to and including 6.223410239847 -:-). The significant change has been the addition of long file names. -These names support up to 255 characters including spaces and lower -case characters as opposed to the traditional 8.3 short names. - -Here is the description of the traditional FAT entry in the current -Windows 95 filesystem: - - struct directory { // Short 8.3 names - unsigned char name[8]; // file name - unsigned char ext[3]; // file extension - unsigned char attr; // attribute byte - unsigned char lcase; // Case for base and extension - unsigned char ctime_ms; // Creation time, milliseconds - unsigned char ctime[2]; // Creation time - unsigned char cdate[2]; // Creation date - unsigned char adate[2]; // Last access date - unsigned char reserved[2]; // reserved values (ignored) - unsigned char time[2]; // time stamp - unsigned char date[2]; // date stamp - unsigned char start[2]; // starting cluster number - unsigned char size[4]; // size of the file - }; - -The lcase field specifies if the base and/or the extension of an 8.3 -name should be capitalized. This field does not seem to be used by -Windows 95 but it is used by Windows NT. The case of filenames is not -completely compatible from Windows NT to Windows 95. It is not completely -compatible in the reverse direction, however. Filenames that fit in -the 8.3 namespace and are written on Windows NT to be lowercase will -show up as uppercase on Windows 95. - -Note that the "start" and "size" values are actually little -endian integer values. The descriptions of the fields in this -structure are public knowledge and can be found elsewhere. - -With the extended FAT system, Microsoft has inserted extra -directory entries for any files with extended names. (Any name which -legally fits within the old 8.3 encoding scheme does not have extra -entries.) I call these extra entries slots. Basically, a slot is a -specially formatted directory entry which holds up to 13 characters of -a file's extended name. Think of slots as additional labeling for the -directory entry of the file to which they correspond. Microsoft -prefers to refer to the 8.3 entry for a file as its alias and the -extended slot directory entries as the file name. - -The C structure for a slot directory entry follows: - - struct slot { // Up to 13 characters of a long name - unsigned char id; // sequence number for slot - unsigned char name0_4[10]; // first 5 characters in name - unsigned char attr; // attribute byte - unsigned char reserved; // always 0 - unsigned char alias_checksum; // checksum for 8.3 alias - unsigned char name5_10[12]; // 6 more characters in name - unsigned char start[2]; // starting cluster number - unsigned char name11_12[4]; // last 2 characters in name - }; - -If the layout of the slots looks a little odd, it's only -because of Microsoft's efforts to maintain compatibility with old -software. The slots must be disguised to prevent old software from -panicking. To this end, a number of measures are taken: - - 1) The attribute byte for a slot directory entry is always set - to 0x0f. This corresponds to an old directory entry with - attributes of "hidden", "system", "read-only", and "volume - label". Most old software will ignore any directory - entries with the "volume label" bit set. Real volume label - entries don't have the other three bits set. - - 2) The starting cluster is always set to 0, an impossible - value for a DOS file. - -Because the extended FAT system is backward compatible, it is -possible for old software to modify directory entries. Measures must -be taken to ensure the validity of slots. An extended FAT system can -verify that a slot does in fact belong to an 8.3 directory entry by -the following: - - 1) Positioning. Slots for a file always immediately proceed - their corresponding 8.3 directory entry. In addition, each - slot has an id which marks its order in the extended file - name. Here is a very abbreviated view of an 8.3 directory - entry and its corresponding long name slots for the file - "My Big File.Extension which is long": - - <proceeding files...> - <slot #3, id = 0x43, characters = "h is long"> - <slot #2, id = 0x02, characters = "xtension whic"> - <slot #1, id = 0x01, characters = "My Big File.E"> - <directory entry, name = "MYBIGFIL.EXT"> - - Note that the slots are stored from last to first. Slots - are numbered from 1 to N. The Nth slot is or'ed with 0x40 - to mark it as the last one. - - 2) Checksum. Each slot has an "alias_checksum" value. The - checksum is calculated from the 8.3 name using the - following algorithm: - - for (sum = i = 0; i < 11; i++) { - sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + name[i] - } - - 3) If there is free space in the final slot, a Unicode NULL (0x0000) - is stored after the final character. After that, all unused - characters in the final slot are set to Unicode 0xFFFF. - -Finally, note that the extended name is stored in Unicode. Each Unicode -character takes either two or four bytes, UTF-16LE encoded. diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 966bd2d9f0cc..a73320576ca9 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -24,9 +24,9 @@ Driver Initialization At the core of every DRM driver is a :c:type:`struct drm_driver <drm_driver>` structure. Drivers typically statically initialize a drm_driver structure, and then pass it to -:c:func:`drm_dev_alloc()` to allocate a device instance. After the +drm_dev_alloc() to allocate a device instance. After the device instance is fully initialized it can be registered (which makes -it accessible from userspace) using :c:func:`drm_dev_register()`. +it accessible from userspace) using drm_dev_register(). The :c:type:`struct drm_driver <drm_driver>` structure contains static information that describes the driver and features it diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 23a3c986ef6d..906771e03103 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -3,7 +3,7 @@ Kernel Mode Setting (KMS) ========================= Drivers must initialize the mode setting core by calling -:c:func:`drm_mode_config_init()` on the DRM device. The function +drm_mode_config_init() on the DRM device. The function initializes the :c:type:`struct drm_device <drm_device>` mode_config field and never fails. Once done, mode configuration must be setup by initializing the following fields. @@ -181,8 +181,7 @@ Setting`_). The somewhat surprising part here is that properties are not directly instantiated on each object, but free-standing mode objects themselves, represented by :c:type:`struct drm_property <drm_property>`, which only specify the type and value range of a property. Any given property can be attached -multiple times to different objects using :c:func:`drm_object_attach_property() -<drm_object_attach_property>`. +multiple times to different objects using drm_object_attach_property(). .. kernel-doc:: include/drm/drm_mode_object.h :internal: @@ -260,7 +259,8 @@ Taken all together there's two consequences for the atomic design: drm_connector_state <drm_connector_state>` for connectors. These are the only objects with userspace-visible and settable state. For internal state drivers can subclass these structures through embeddeding, or add entirely new state - structures for their globally shared hardware functions. + structures for their globally shared hardware functions, see :c:type:`struct + drm_private_state<drm_private_state>`. - An atomic update is assembled and validated as an entirely free-standing pile of structures within the :c:type:`drm_atomic_state <drm_atomic_state>` @@ -269,6 +269,14 @@ Taken all together there's two consequences for the atomic design: to the driver and modeset objects. This way rolling back an update boils down to releasing memory and unreferencing objects like framebuffers. +Locking of atomic state structures is internally using :c:type:`struct +drm_modeset_lock <drm_modeset_lock>`. As a general rule the locking shouldn't be +exposed to drivers, instead the right locks should be automatically acquired by +any function that duplicates or peeks into a state, like e.g. +drm_atomic_get_crtc_state(). Locking only protects the software data +structure, ordering of committing state changes to hardware is sequenced using +:c:type:`struct drm_crtc_commit <drm_crtc_commit>`. + Read on in this chapter, and also in :ref:`drm_atomic_helper` for more detailed coverage of specific topics. @@ -479,6 +487,9 @@ Color Management Properties .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: +.. kernel-doc:: include/drm/drm_color_mgmt.h + :internal: + Tile Group Property ------------------- diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 59619296c84b..c77b32601260 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -149,19 +149,19 @@ struct :c:type:`struct drm_gem_object <drm_gem_object>`. To create a GEM object, a driver allocates memory for an instance of its specific GEM object type and initializes the embedded struct :c:type:`struct drm_gem_object <drm_gem_object>` with a call -to :c:func:`drm_gem_object_init()`. The function takes a pointer +to drm_gem_object_init(). The function takes a pointer to the DRM device, a pointer to the GEM object and the buffer object size in bytes. GEM uses shmem to allocate anonymous pageable memory. -:c:func:`drm_gem_object_init()` will create an shmfs file of the +drm_gem_object_init() will create an shmfs file of the requested size and store it into the struct :c:type:`struct drm_gem_object <drm_gem_object>` filp field. The memory is used as either main storage for the object when the graphics hardware uses system memory directly or as a backing store otherwise. Drivers are responsible for the actual physical pages allocation by -calling :c:func:`shmem_read_mapping_page_gfp()` for each page. +calling shmem_read_mapping_page_gfp() for each page. Note that they can decide to allocate pages when initializing the GEM object, or to delay allocation until the memory is needed (for instance when a page fault occurs as a result of a userspace memory access or @@ -170,20 +170,18 @@ when the driver needs to start a DMA transfer involving the memory). Anonymous pageable memory allocation is not always desired, for instance when the hardware requires physically contiguous system memory as is often the case in embedded devices. Drivers can create GEM objects with -no shmfs backing (called private GEM objects) by initializing them with -a call to :c:func:`drm_gem_private_object_init()` instead of -:c:func:`drm_gem_object_init()`. Storage for private GEM objects -must be managed by drivers. +no shmfs backing (called private GEM objects) by initializing them with a call +to drm_gem_private_object_init() instead of drm_gem_object_init(). Storage for +private GEM objects must be managed by drivers. GEM Objects Lifetime -------------------- All GEM objects are reference-counted by the GEM core. References can be -acquired and release by :c:func:`calling drm_gem_object_get()` and -:c:func:`drm_gem_object_put()` respectively. The caller must hold the -:c:type:`struct drm_device <drm_device>` struct_mutex lock when calling -:c:func:`drm_gem_object_get()`. As a convenience, GEM provides -:c:func:`drm_gem_object_put_unlocked()` functions that can be called without +acquired and release by calling drm_gem_object_get() and drm_gem_object_put() +respectively. The caller must hold the :c:type:`struct drm_device <drm_device>` +struct_mutex lock when calling drm_gem_object_get(). As a convenience, GEM +provides drm_gem_object_put_unlocked() functions that can be called without holding the lock. When the last reference to a GEM object is released the GEM core calls @@ -194,7 +192,7 @@ free the GEM object and all associated resources. void (\*gem_free_object) (struct drm_gem_object \*obj); Drivers are responsible for freeing all GEM object resources. This includes the resources created by the GEM core, which need to be released with -:c:func:`drm_gem_object_release()`. +drm_gem_object_release(). GEM Objects Naming ------------------ @@ -210,13 +208,11 @@ to the GEM object in other standard or driver-specific ioctls. Closing a DRM file handle frees all its GEM handles and dereferences the associated GEM objects. -To create a handle for a GEM object drivers call -:c:func:`drm_gem_handle_create()`. The function takes a pointer -to the DRM file and the GEM object and returns a locally unique handle. -When the handle is no longer needed drivers delete it with a call to -:c:func:`drm_gem_handle_delete()`. Finally the GEM object -associated with a handle can be retrieved by a call to -:c:func:`drm_gem_object_lookup()`. +To create a handle for a GEM object drivers call drm_gem_handle_create(). The +function takes a pointer to the DRM file and the GEM object and returns a +locally unique handle. When the handle is no longer needed drivers delete it +with a call to drm_gem_handle_delete(). Finally the GEM object associated with a +handle can be retrieved by a call to drm_gem_object_lookup(). Handles don't take ownership of GEM objects, they only take a reference to the object that will be dropped when the handle is destroyed. To @@ -258,7 +254,7 @@ The mmap system call can't be used directly to map GEM objects, as they don't have their own file handle. Two alternative methods currently co-exist to map GEM objects to userspace. The first method uses a driver-specific ioctl to perform the mapping operation, calling -:c:func:`do_mmap()` under the hood. This is often considered +do_mmap() under the hood. This is often considered dubious, seems to be discouraged for new GEM-enabled drivers, and will thus not be described here. @@ -267,23 +263,22 @@ The second method uses the mmap system call on the DRM file handle. void offset); DRM identifies the GEM object to be mapped by a fake offset passed through the mmap offset argument. Prior to being mapped, a GEM object must thus be associated with a fake offset. To do so, drivers -must call :c:func:`drm_gem_create_mmap_offset()` on the object. +must call drm_gem_create_mmap_offset() on the object. Once allocated, the fake offset value must be passed to the application in a driver-specific way and can then be used as the mmap offset argument. -The GEM core provides a helper method :c:func:`drm_gem_mmap()` to +The GEM core provides a helper method drm_gem_mmap() to handle object mapping. The method can be set directly as the mmap file operation handler. It will look up the GEM object based on the offset value and set the VMA operations to the :c:type:`struct drm_driver -<drm_driver>` gem_vm_ops field. Note that -:c:func:`drm_gem_mmap()` doesn't map memory to userspace, but -relies on the driver-provided fault handler to map pages individually. +<drm_driver>` gem_vm_ops field. Note that drm_gem_mmap() doesn't map memory to +userspace, but relies on the driver-provided fault handler to map pages +individually. -To use :c:func:`drm_gem_mmap()`, drivers must fill the struct -:c:type:`struct drm_driver <drm_driver>` gem_vm_ops field -with a pointer to VM operations. +To use drm_gem_mmap(), drivers must fill the struct :c:type:`struct drm_driver +<drm_driver>` gem_vm_ops field with a pointer to VM operations. The VM operations is a :c:type:`struct vm_operations_struct <vm_operations_struct>` made up of several fields, the more interesting ones being: @@ -298,9 +293,8 @@ made up of several fields, the more interesting ones being: The open and close operations must update the GEM object reference -count. Drivers can use the :c:func:`drm_gem_vm_open()` and -:c:func:`drm_gem_vm_close()` helper functions directly as open -and close handlers. +count. Drivers can use the drm_gem_vm_open() and drm_gem_vm_close() helper +functions directly as open and close handlers. The fault operation handler is responsible for mapping individual pages to userspace when a page fault occurs. Depending on the memory @@ -312,12 +306,12 @@ Drivers that want to map the GEM object upfront instead of handling page faults can implement their own mmap file operation handler. For platforms without MMU the GEM core provides a helper method -:c:func:`drm_gem_cma_get_unmapped_area`. The mmap() routines will call -this to get a proposed address for the mapping. +drm_gem_cma_get_unmapped_area(). The mmap() routines will call this to get a +proposed address for the mapping. -To use :c:func:`drm_gem_cma_get_unmapped_area`, drivers must fill the -struct :c:type:`struct file_operations <file_operations>` get_unmapped_area -field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`. +To use drm_gem_cma_get_unmapped_area(), drivers must fill the struct +:c:type:`struct file_operations <file_operations>` get_unmapped_area field with +a pointer on drm_gem_cma_get_unmapped_area(). More detailed information about get_unmapped_area can be found in Documentation/nommu-mmap.txt diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 94f90521f58c..56fec6ed1ad8 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -254,36 +254,45 @@ Validating changes with IGT There's a collection of tests that aims to cover the whole functionality of DRM drivers and that can be used to check that changes to DRM drivers or the core don't regress existing functionality. This test suite is called IGT and -its code can be found in https://cgit.freedesktop.org/drm/igt-gpu-tools/. +its code and instructions to build and run can be found in +https://gitlab.freedesktop.org/drm/igt-gpu-tools/. -To build IGT, start by installing its build dependencies. In Debian-based -systems:: +Using VKMS to test DRM API +-------------------------- - # apt-get build-dep intel-gpu-tools +VKMS is a software-only model of a KMS driver that is useful for testing +and for running compositors. VKMS aims to enable a virtual display without +the need for a hardware display capability. These characteristics made VKMS +a perfect tool for validating the DRM core behavior and also support the +compositor developer. VKMS makes it possible to test DRM functions in a +virtual machine without display, simplifying the validation of some of the +core changes. -And in Fedora-based systems:: +To Validate changes in DRM API with VKMS, start setting the kernel: make +sure to enable VKMS module; compile the kernel with the VKMS enabled and +install it in the target machine. VKMS can be run in a Virtual Machine +(QEMU, virtme or similar). It's recommended the use of KVM with the minimum +of 1GB of RAM and four cores. - # dnf builddep intel-gpu-tools +It's possible to run the IGT-tests in a VM in two ways: -Then clone the repository:: + 1. Use IGT inside a VM + 2. Use IGT from the host machine and write the results in a shared directory. - $ git clone git://anongit.freedesktop.org/drm/igt-gpu-tools +As follow, there is an example of using a VM with a shared directory with +the host machine to run igt-tests. As an example it's used virtme:: -Configure the build system and start the build:: + $ virtme-run --rwdir /path/for/shared_dir --kdir=path/for/kernel/directory --mods=auto - $ cd igt-gpu-tools && ./autogen.sh && make -j6 +Run the igt-tests in the guest machine, as example it's ran the 'kms_flip' +tests:: -Download the piglit dependency:: + $ /path/for/igt-gpu-tools/scripts/run-tests.sh -p -s -t "kms_flip.*" -v - $ ./scripts/run-tests.sh -d - -And run the tests:: - - $ ./scripts/run-tests.sh -t kms -t core -s - -run-tests.sh is a wrapper around piglit that will execute the tests matching -the -t options. A report in HTML format will be available in -./results/html/index.html. Results can be compared with piglit. +In this example, instead of build the igt_runner, Piglit is used +(-p option); it's created html summary of the tests results and it's saved +in the folder "igt-gpu-tools/results"; it's executed only the igt-tests +matching the -t option. Display CRC Support ------------------- diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index d0947c5c4ab8..e539c42a3e78 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -466,9 +466,6 @@ GuC-based command submission .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c :doc: GuC-based command submission -.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c - :internal: - HuC --- .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_huc.c diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 6792fa9b6b6b..bc869b23fc39 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -142,14 +142,14 @@ Contact: Daniel Vetter, respective driver maintainers Level: Advanced -Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent ----------------------------------------------------------------------------- +Convert logging to drm_* functions with drm_device paramater +------------------------------------------------------------ For drivers which could have multiple instances, it is necessary to differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR don't do this, drivers used dev_info/warn/err to make this differentiation. We -now have DRM_DEV_* variants of the drm print macros, so we can start to convert -those drivers back to using drm-formwatted specific log messages. +now have drm_* variants of the drm print functions, so we can start to convert +those drivers back to using drm-formatted specific log messages. Before you start this conversion please contact the relevant maintainers to make sure your work will be merged - not everyone agrees that the DRM dmesg macros @@ -171,23 +171,40 @@ Contact: Maintainer of the driver you plan to convert Level: Intermediate -Convert drivers to use drm_fb_helper_fbdev_setup/teardown() ------------------------------------------------------------ +Convert drivers to use drm_fbdev_generic_setup() +------------------------------------------------ -Most drivers can use drm_fb_helper_fbdev_setup() except maybe: +Most drivers can use drm_fbdev_generic_setup(). Driver have to implement +atomic modesetting and GEM vmap support. Current generic fbdev emulation +expects the framebuffer in system memory (or system-like memory). -- amdgpu which has special logic to decide whether to call - drm_helper_disable_unused_functions() +Contact: Maintainer of the driver you plan to convert + +Level: Intermediate -- armada which isn't atomic and doesn't call - drm_helper_disable_unused_functions() +drm_framebuffer_funcs and drm_mode_config_funcs.fb_create cleanup +----------------------------------------------------------------- -- i915 which calls drm_fb_helper_initial_config() in a worker +A lot more drivers could be switched over to the drm_gem_framebuffer helpers. +Various hold-ups: -Drivers that use drm_framebuffer_remove() to clean up the fbdev framebuffer can -probably use drm_fb_helper_fbdev_teardown(). +- Need to switch over to the generic dirty tracking code using + drm_atomic_helper_dirtyfb first (e.g. qxl). -Contact: Maintainer of the driver you plan to convert +- Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb + setup code can't be deleted. + +- Many drivers wrap drm_gem_fb_create() only to check for valid formats. For + atomic drivers we could check for valid formats by calling + drm_plane_check_pixel_format() against all planes, and pass if any plane + supports the format. For non-atomic that's not possible since like the format + list for the primary plane is fake and we'd therefor reject valid formats. + +- Many drivers subclass drm_framebuffer, we'd need a embedding compatible + version of the varios drm_gem_fb_create functions. Maybe called + drm_gem_fb_create/_with_dirty/_with_funcs as needed. + +Contact: Daniel Vetter Level: Intermediate @@ -328,8 +345,8 @@ drm_fb_helper tasks these igt tests need to be fixed: kms_fbcon_fbt@psr and kms_fbcon_fbt@psr-suspend. -- The max connector argument for drm_fb_helper_init() and - drm_fb_helper_fbdev_setup() isn't used anymore and can be removed. +- The max connector argument for drm_fb_helper_init() isn't used anymore and + can be removed. - The helper doesn't keep an array of connectors anymore so these can be removed: drm_fb_helper_single_add_all_connectors(), @@ -351,6 +368,23 @@ connector register/unregister fixes Level: Intermediate +Remove load/unload callbacks from all non-DRIVER_LEGACY drivers +--------------------------------------------------------------- + +The load/unload callbacks in struct &drm_driver are very much midlayers, plus +for historical reasons they get the ordering wrong (and we can't fix that) +between setting up the &drm_driver structure and calling drm_dev_register(). + +- Rework drivers to no longer use the load/unload callbacks, directly coding the + load/unload sequence into the driver's probe function. + +- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload + callbacks for all modern drivers. + +Contact: Daniel Vetter + +Level: Intermediate + Core refactorings ================= diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 231e6a64957f..d0111dd26410 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -591,7 +591,8 @@ The two different resolutions for b) can be tested in the sample Kconfig file Documentation/kbuild/Kconfig.recursion-issue-02. Below is a list of examples of prior fixes for these types of recursive issues; -all errors appear to involve one or more select's and one or more "depends on". +all errors appear to involve one or more "select" statements and one or more +"depends on". ============ =================================== commit fix @@ -653,7 +654,7 @@ the use of the xconfig configurator [1]_. Work should be done to confirm if the deduced semantics matches our intended Kconfig design goals. Having well defined semantics can be useful for tools for practical -evaluation of depenencies, for instance one such use known case was work to +evaluation of dependencies, for instance one such case was work to express in boolean abstraction of the inferred semantics of Kconfig to translate Kconfig logic into boolean formulas and run a SAT solver on this to find dead code / features (always inactive), 114 dead features were found in @@ -680,7 +681,7 @@ abstraction the inferred semantics of Kconfig to translate Kconfig logic into boolean formulas and run a SAT solver on it [5]_. Another known related project is CADOS [6]_ (former VAMOS [7]_) and the tools, mainly undertaker [8]_, which has been introduced first with [9]_. The basic concept of undertaker is to -exract variability models from Kconfig, and put them together with a +extract variability models from Kconfig and put them together with a propositional formula extracted from CPP #ifdefs and build-rules into a SAT solver in order to find dead code, dead files, and dead symbols. If using a SAT solver is desirable on Kconfig one approach would be to evaluate repurposing diff --git a/Documentation/kbuild/kconfig.rst b/Documentation/kbuild/kconfig.rst index a9a855f894b3..dce6801d66c9 100644 --- a/Documentation/kbuild/kconfig.rst +++ b/Documentation/kbuild/kconfig.rst @@ -154,11 +154,6 @@ KCONFIG_AUTOCONFIG This environment variable can be set to specify the path & name of the "auto.conf" file. Its default value is "include/config/auto.conf". -KCONFIG_TRISTATE ----------------- -This environment variable can be set to specify the path & name of the -"tristate.conf" file. Its default value is "include/config/tristate.conf". - KCONFIG_AUTOHEADER ------------------ This environment variable can be set to specify the path & name of the diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst index a3ddb213a5e1..d62aacb2822a 100644 --- a/Documentation/kernel-hacking/hacking.rst +++ b/Documentation/kernel-hacking/hacking.rst @@ -601,7 +601,7 @@ Defined in ``include/linux/export.h`` This is the variant of `EXPORT_SYMBOL()` that allows specifying a symbol namespace. Symbol Namespaces are documented in -``Documentation/kbuild/namespaces.rst``. +``Documentation/core-api/symbol-namespaces.rst``. :c:func:`EXPORT_SYMBOL_NS_GPL()` -------------------------------- @@ -610,7 +610,7 @@ Defined in ``include/linux/export.h`` This is the variant of `EXPORT_SYMBOL_GPL()` that allows specifying a symbol namespace. Symbol Namespaces are documented in -``Documentation/kbuild/namespaces.rst``. +``Documentation/core-api/symbol-namespaces.rst``. Routines and Conventions ======================== diff --git a/Documentation/locking/locktorture.rst b/Documentation/locking/locktorture.rst index e79eeeca3ac6..5bcb99ba7bd9 100644 --- a/Documentation/locking/locktorture.rst +++ b/Documentation/locking/locktorture.rst @@ -103,8 +103,7 @@ stat_interval Number of seconds between statistics-related printk()s. By default, locktorture will report stats every 60 seconds. Setting the interval to zero causes the statistics to - be printed -only- when the module is unloaded, and this - is the default. + be printed -only- when the module is unloaded. stutter The length of time to run the test before pausing for this diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index 3eaddc8ac56d..11ebe3682771 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -99,4 +99,5 @@ to do something different in the near future. .. toctree:: :maxdepth: 1 + ../doc-guide/maintainer-profile ../nvdimm/maintainer-entry-profile diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst index fbc5517c8d5a..b362109bb131 100644 --- a/Documentation/media/kapi/dtv-frontend.rst +++ b/Documentation/media/kapi/dtv-frontend.rst @@ -15,8 +15,8 @@ The header file for this API is named ``dvb_frontend.h`` and located in Demodulator driver ^^^^^^^^^^^^^^^^^^ -The demodulator driver is responsible to talk with the decoding part of the -hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with +The demodulator driver is responsible for talking with the decoding part of the +hardware. Such driver should implement :c:type:`dvb_frontend_ops`, which tells what type of digital TV standards are supported, and points to a series of functions that allow the DVB core to command the hardware via the code under ``include/media/dvb_frontend.c``. @@ -120,7 +120,7 @@ Satellite TV reception is:: .. |delta| unicode:: U+00394 -The ``include/media/dvb_frontend.c`` has a kernel thread with is +The ``include/media/dvb_frontend.c`` has a kernel thread which is responsible for tuning the device. It supports multiple algorithms to detect a channel, as defined at enum :c:func:`dvbfe_algo`. @@ -220,11 +220,11 @@ Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) - As the gain is visible through the set of registers that adjust the gain, typically, this statistics is always available [#f3]_. - - Drivers should try to make it available all the times, as this statistics + - Drivers should try to make it available all the times, as these statistics can be used when adjusting an antenna position and to check for troubles at the cabling. - .. [#f3] On a few devices, the gain keeps floating if no carrier. + .. [#f3] On a few devices, the gain keeps floating if there is no carrier. On such devices, strength report should check first if carrier is detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`), and otherwise return the lowest possible value. @@ -232,7 +232,7 @@ Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`) - Signal to Noise ratio for the main carrier. - - Signal to Noise measurement depends on the device. On some hardware, is + - Signal to Noise measurement depends on the device. On some hardware, it is available when the main carrier is detected. On those hardware, CNR measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``, see :c:type:`fe_status`). @@ -323,8 +323,8 @@ A typical example of the logic that handle status and statistics is:: .read_status = foo_get_status_and_stats, }; -Statistics collect -^^^^^^^^^^^^^^^^^^ +Statistics collection +^^^^^^^^^^^^^^^^^^^^^ On almost all frontend hardware, the bit and byte counts are stored by the hardware after a certain amount of time or after the total bit/block diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index d0902f356d65..2535b77e3459 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -177,7 +177,7 @@ Available follower modes are: - ``CEC_MODE_MONITOR`` - 0xe0 - Put the file descriptor into monitor mode. Can only be used in - combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,i + combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise the ``EINVAL`` error code will be returned. In monitor mode all messages this CEC device transmits and all messages it receives (both broadcast diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst index def6c40db601..7f03fbe3d3b0 100644 --- a/Documentation/media/uapi/dvb/video-get-event.rst +++ b/Documentation/media/uapi/dvb/video-get-event.rst @@ -81,7 +81,7 @@ for this ioctl call. #define VIDEO_EVENT_FRAME_RATE_CHANGED 2 #define VIDEO_EVENT_DECODER_STOPPED 3 #define VIDEO_EVENT_VSYNC 4 - __kernel_time_t timestamp; + long timestamp; union { video_size_t size; unsigned int frame_rate; /* in frames per 1000sec */ diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst index 479942ce6fb8..2697400ccf62 100644 --- a/Documentation/media/uapi/dvb/video_types.rst +++ b/Documentation/media/uapi/dvb/video_types.rst @@ -170,7 +170,7 @@ VIDEO_GET_EVENT call. #define VIDEO_EVENT_FRAME_RATE_CHANGED 2 #define VIDEO_EVENT_DECODER_STOPPED 3 #define VIDEO_EVENT_VSYNC 4 - __kernel_time_t timestamp; + long timestamp; union { video_size_t size; unsigned int frame_rate; /* in frames per 1000sec */ diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index b2cd155e691b..7d98a7bf9f1f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -55,8 +55,7 @@ please make a proposal on the linux-media mailing list. - ``V4L2_PIX_FMT_HM12`` - 'HM12' - - YUV 4:2:0 format used by the IVTV driver, - `http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__ + - YUV 4:2:0 format used by the IVTV driver. The format is documented in the kernel sources in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst index 960851275f23..045540bc0d86 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst @@ -13,7 +13,7 @@ .. _v4l2-pix-fmt-sgrbg12p: ******************************************************************************************************************************* -V4L2_PIX_FMT_SRGGB12P ('pRAA'), V4L2_PIX_FMT_SGRBG12P ('pgAA'), V4L2_PIX_FMT_SGBRG12P ('pGAA'), V4L2_PIX_FMT_SBGGR12P ('pBAA'), +V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC'), ******************************************************************************************************************************* diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst index 1a988d7e7ff8..051ae3d05bc3 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst @@ -13,7 +13,7 @@ .. _v4l2-pix-fmt-sgrbg14p: ******************************************************************************************************************************* -V4L2_PIX_FMT_SRGGB14P ('pRCC'), V4L2_PIX_FMT_SGRBG14P ('pgCC'), V4L2_PIX_FMT_SGBRG14P ('pGCC'), V4L2_PIX_FMT_SBGGR14P ('pBCC'), +V4L2_PIX_FMT_SRGGB14P ('pREE'), V4L2_PIX_FMT_SGRBG14P ('pgEE'), V4L2_PIX_FMT_SGBRG14P ('pGEE'), V4L2_PIX_FMT_SBGGR14P ('pBEE'), ******************************************************************************************************************************* *man V4L2_PIX_FMT_SRGGB14P(2)* diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst index 4031b175257c..6f1be873bec1 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst @@ -15,7 +15,7 @@ V4L2_TCH_FMT_DELTA_TD16 ('TD16') *man V4L2_TCH_FMT_DELTA_TD16(2)* -16-bit signed Touch Delta +16-bit signed little endian Touch Delta Description @@ -37,38 +37,38 @@ Each cell is one byte. :widths: 2 1 1 1 1 1 1 1 1 * - start + 0: - - D'\ :sub:`00high` - D'\ :sub:`00low` - - D'\ :sub:`01high` + - D'\ :sub:`00high` - D'\ :sub:`01low` - - D'\ :sub:`02high` + - D'\ :sub:`01high` - D'\ :sub:`02low` - - D'\ :sub:`03high` + - D'\ :sub:`02high` - D'\ :sub:`03low` + - D'\ :sub:`03high` * - start + 8: - - D'\ :sub:`10high` - D'\ :sub:`10low` - - D'\ :sub:`11high` + - D'\ :sub:`10high` - D'\ :sub:`11low` - - D'\ :sub:`12high` + - D'\ :sub:`11high` - D'\ :sub:`12low` - - D'\ :sub:`13high` + - D'\ :sub:`12high` - D'\ :sub:`13low` + - D'\ :sub:`13high` * - start + 16: - - D'\ :sub:`20high` - D'\ :sub:`20low` - - D'\ :sub:`21high` + - D'\ :sub:`20high` - D'\ :sub:`21low` - - D'\ :sub:`22high` + - D'\ :sub:`21high` - D'\ :sub:`22low` - - D'\ :sub:`23high` + - D'\ :sub:`22high` - D'\ :sub:`23low` + - D'\ :sub:`23high` * - start + 24: - - D'\ :sub:`30high` - D'\ :sub:`30low` - - D'\ :sub:`31high` + - D'\ :sub:`30high` - D'\ :sub:`31low` - - D'\ :sub:`32high` + - D'\ :sub:`31high` - D'\ :sub:`32low` - - D'\ :sub:`33high` + - D'\ :sub:`32high` - D'\ :sub:`33low` + - D'\ :sub:`33high` diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst index 8278543be99a..cb3da6687a58 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst @@ -15,7 +15,7 @@ V4L2_TCH_FMT_TU16 ('TU16') *man V4L2_TCH_FMT_TU16(2)* -16-bit unsigned raw touch data +16-bit unsigned little endian raw touch data Description @@ -36,38 +36,38 @@ Each cell is one byte. :widths: 2 1 1 1 1 1 1 1 1 * - start + 0: - - R'\ :sub:`00high` - R'\ :sub:`00low` - - R'\ :sub:`01high` + - R'\ :sub:`00high` - R'\ :sub:`01low` - - R'\ :sub:`02high` + - R'\ :sub:`01high` - R'\ :sub:`02low` - - R'\ :sub:`03high` + - R'\ :sub:`02high` - R'\ :sub:`03low` + - R'\ :sub:`03high` * - start + 8: - - R'\ :sub:`10high` - R'\ :sub:`10low` - - R'\ :sub:`11high` + - R'\ :sub:`10high` - R'\ :sub:`11low` - - R'\ :sub:`12high` + - R'\ :sub:`11high` - R'\ :sub:`12low` - - R'\ :sub:`13high` + - R'\ :sub:`12high` - R'\ :sub:`13low` + - R'\ :sub:`13high` * - start + 16: - - R'\ :sub:`20high` - R'\ :sub:`20low` - - R'\ :sub:`21high` + - R'\ :sub:`20high` - R'\ :sub:`21low` - - R'\ :sub:`22high` + - R'\ :sub:`21high` - R'\ :sub:`22low` - - R'\ :sub:`23high` + - R'\ :sub:`22high` - R'\ :sub:`23low` + - R'\ :sub:`23high` * - start + 24: - - R'\ :sub:`30high` - R'\ :sub:`30low` - - R'\ :sub:`31high` + - R'\ :sub:`30high` - R'\ :sub:`31low` - - R'\ :sub:`32high` + - R'\ :sub:`31high` - R'\ :sub:`32low` - - R'\ :sub:`33high` + - R'\ :sub:`32high` - R'\ :sub:`33low` + - R'\ :sub:`33high` diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst index 399ef1062bac..8ca6ab701e4a 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst @@ -44,7 +44,9 @@ To enumerate image formats applications initialize the ``type`` and the :ref:`VIDIOC_ENUM_FMT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an ``EINVAL`` error code. All formats are enumerable by beginning at index zero and incrementing by -one until ``EINVAL`` is returned. +one until ``EINVAL`` is returned. If applicable, drivers shall return +formats in preference order, where preferred formats are returned before +(that is, with lower ``index`` value) less-preferred formats. .. note:: diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index 5712bd48e687..5c675cbac4cf 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -279,7 +279,7 @@ EBUSY then it will set this flag to signal this to the application. * - ``V4L2_DV_FL_HALF_LINE`` - Specific to interlaced formats: if set, then the vertical - backporch of field 1 (aka the odd field) is really one half-line + frontporch of field 1 (aka the odd field) is really one half-line longer and the vertical backporch of field 2 (aka the even field) is really one half-line shorter, so each field has exactly the same number of half-lines. Whether half-lines can be detected or diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst deleted file mode 100644 index 16895a734bae..000000000000 --- a/Documentation/media/v4l-drivers/cx18.rst +++ /dev/null @@ -1,39 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The cx18 driver -=============== - -.. note:: - - This documentation is outdated. - -Some notes regarding the cx18 driver for the Conexant CX23418 MPEG -encoder chip: - -1) Currently supported are: - - - Hauppauge HVR-1600 - - Compro VideoMate H900 - - Yuan MPC718 - - Conexant Raptor PAL/SECAM devkit - -2) Some people have problems getting the i2c bus to work. - The symptom is that the eeprom cannot be read and the card is - unusable. This is probably fixed, but if you have problems - then post to the video4linux or ivtv-users mailing list. - -3) VBI (raw or sliced) has not yet been implemented. - -4) MPEG indexing is not yet implemented. - -5) The driver is still a bit rough around the edges, this should - improve over time. - - -Firmware: - -You can obtain the firmware files here: - -http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz - -Untar and copy the .fw files to your firmware directory. diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index c4c78a28654c..b41fea23fe5d 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -38,7 +38,6 @@ For more details see the file COPYING in the source distribution of Linux. bttv cafe_ccic cpia2 - cx18 cx2341x cx88 davinci-vpbe diff --git a/Documentation/misc-devices/xilinx_sdfec.rst b/Documentation/misc-devices/xilinx_sdfec.rst index 2245fcfa224d..7a47075c171c 100644 --- a/Documentation/misc-devices/xilinx_sdfec.rst +++ b/Documentation/misc-devices/xilinx_sdfec.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0+ + ==================== Xilinx SD-FEC Driver ==================== diff --git a/Documentation/nvdimm/maintainer-entry-profile.rst b/Documentation/nvdimm/maintainer-entry-profile.rst index 77081fd9be95..efe37adadcea 100644 --- a/Documentation/nvdimm/maintainer-entry-profile.rst +++ b/Documentation/nvdimm/maintainer-entry-profile.rst @@ -33,7 +33,8 @@ Those tests need to be passed before the patches go upstream, but not necessarily before initial posting. Contact the list if you need help getting the test environment set up. -### ACPI Device Specific Methods (_DSM) +ACPI Device Specific Methods (_DSM) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Before patches enabling for a new _DSM family will be considered it must be assigned a format-interface-code from the NVDIMM Sub-team of the ACPI Specification Working Group. In general, the stance of the subsystem is diff --git a/Documentation/powerpc/ultravisor.rst b/Documentation/powerpc/ultravisor.rst index 730854f73830..363736d7fd36 100644 --- a/Documentation/powerpc/ultravisor.rst +++ b/Documentation/powerpc/ultravisor.rst @@ -948,6 +948,66 @@ Use cases up its internal state for this virtual machine. +H_SVM_INIT_ABORT +---------------- + + Abort the process of securing an SVM. + +Syntax +~~~~~~ + +.. code-block:: c + + uint64_t hypercall(const uint64_t H_SVM_INIT_ABORT) + +Return values +~~~~~~~~~~~~~ + + One of the following values: + + * H_PARAMETER on successfully cleaning up the state, + Hypervisor will return this value to the + **guest**, to indicate that the underlying + UV_ESM ultracall failed. + + * H_STATE if called after a VM has gone secure (i.e + H_SVM_INIT_DONE hypercall was successful). + + * H_UNSUPPORTED if called from a wrong context (e.g. from a + normal VM). + +Description +~~~~~~~~~~~ + + Abort the process of securing a virtual machine. This call must + be made after a prior call to ``H_SVM_INIT_START`` hypercall and + before a call to ``H_SVM_INIT_DONE``. + + On entry into this hypercall the non-volatile GPRs and FPRs are + expected to contain the values they had at the time the VM issued + the UV_ESM ultracall. Further ``SRR0`` is expected to contain the + address of the instruction after the ``UV_ESM`` ultracall and ``SRR1`` + the MSR value with which to return to the VM. + + This hypercall will cleanup any partial state that was established for + the VM since the prior ``H_SVM_INIT_START`` hypercall, including paging + out pages that were paged-into secure memory, and issue the + ``UV_SVM_TERMINATE`` ultracall to terminate the VM. + + After the partial state is cleaned up, control returns to the VM + (**not Ultravisor**), at the address specified in ``SRR0`` with the + MSR values set to the value in ``SRR1``. + +Use cases +~~~~~~~~~ + + If after a successful call to ``H_SVM_INIT_START``, the Ultravisor + encounters an error while securing a virtual machine, either due + to lack of resources or because the VM's security information could + not be validated, Ultravisor informs the Hypervisor about it. + Hypervisor should use this call to clean up any internal state for + this virtual machine and return to the VM. + H_SVM_PAGE_IN ------------- diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index 5d54946cfc75..33edae654599 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -1,3 +1,5 @@ +.. _embargoed_hardware_issues: + Embargoed hardware issues ========================= @@ -36,7 +38,10 @@ issue according to our documented process. The list is encrypted and email to the list can be sent by either PGP or S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME certificate. The list's PGP key and S/MIME certificate are available from -https://www.kernel.org/.... +the following URLs: + + - PGP: https://www.kernel.org/static/files/hardware-security.asc + - S/MIME: https://www.kernel.org/static/files/hardware-security.crt While hardware security issues are often handled by the affected hardware vendor, we welcome contact from researchers or individuals who have @@ -55,14 +60,14 @@ Operation of mailing-lists ^^^^^^^^^^^^^^^^^^^^^^^^^^ The encrypted mailing-lists which are used in our process are hosted on -Linux Foundation's IT infrastructure. By providing this service Linux -Foundation's director of IT Infrastructure security technically has the -ability to access the embargoed information, but is obliged to -confidentiality by his employment contract. Linux Foundation's director of -IT Infrastructure security is also responsible for the kernel.org -infrastructure. - -The Linux Foundation's current director of IT Infrastructure security is +Linux Foundation's IT infrastructure. By providing this service, members +of Linux Foundation's IT operations personnel technically have the +ability to access the embargoed information, but are obliged to +confidentiality by their employment contract. Linux Foundation IT +personnel are also responsible for operating and managing the rest of +kernel.org infrastructure. + +The Linux Foundation's current director of IT Project infrastructure is Konstantin Ryabitsev. @@ -274,7 +279,7 @@ software decrypts the email and re-encrypts it individually for each subscriber with the subscriber's PGP key or S/MIME certificate. Details about the mailing-list software and the setup which is used to ensure the security of the lists and protection of the data can be found here: -https://www.kernel.org/.... +https://korg.wiki.kernel.org/userdoc/remail. List keys ^^^^^^^^^ diff --git a/Documentation/riscv/boot-image-header.rst b/Documentation/riscv/boot-image-header.rst index 518d46d2389d..d7752533865f 100644 --- a/Documentation/riscv/boot-image-header.rst +++ b/Documentation/riscv/boot-image-header.rst @@ -22,7 +22,7 @@ The following 64-byte header is present in decompressed Linux kernel image:: u64 res2 = 0; /* Reserved */ u64 magic = 0x5643534952; /* Magic number, little endian, "RISCV" */ u32 magic2 = 0x05435352; /* Magic number 2, little endian, "RSC\x05" */ - u32 res4; /* Reserved for PE COFF offset */ + u32 res3; /* Reserved for PE COFF offset */ This header format is compliant with PE/COFF header and largely inspired from ARM64 header. Thus, both ARM64 & RISC-V header can be combined into one common @@ -34,7 +34,7 @@ Notes - This header can also be reused to support EFI stub for RISC-V in future. EFI specification needs PE/COFF image header in the beginning of the kernel image in order to load it as an EFI application. In order to support EFI stub, - code0 should be replaced with "MZ" magic string and res5(at offset 0x3c) should + code0 should be replaced with "MZ" magic string and res3(at offset 0x3c) should point to the rest of the PE/COFF header. - version field indicate header version number diff --git a/Documentation/sphinx/automarkup.py b/Documentation/sphinx/automarkup.py index 5b6119ff69f4..b18236370742 100644 --- a/Documentation/sphinx/automarkup.py +++ b/Documentation/sphinx/automarkup.py @@ -5,8 +5,13 @@ # has been done. # from docutils import nodes +import sphinx from sphinx import addnodes -from sphinx.environment import NoUri +if sphinx.version_info[0] < 2 or \ + sphinx.version_info[0] == 2 and sphinx.version_info[1] < 1: + from sphinx.environment import NoUri +else: + from sphinx.errors import NoUri import re # diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index d2b5657ed33e..ff658e27d25b 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -95,7 +95,8 @@ of ftrace. Here is a list of some of the key files: current_tracer: This is used to set or display the current tracer - that is configured. + that is configured. Changing the current tracer clears + the ring buffer content as well as the "snapshot" buffer. available_tracers: @@ -126,7 +127,8 @@ of ftrace. Here is a list of some of the key files: This file holds the output of the trace in a human readable format (described below). Note, tracing is temporarily disabled when the file is open for reading. Once all readers - are closed, tracing is re-enabled. + are closed, tracing is re-enabled. Opening this file for + writing with the O_TRUNC flag clears the ring buffer content. trace_pipe: @@ -185,7 +187,8 @@ of ftrace. Here is a list of some of the key files: CPU buffer and not total size of all buffers. The trace buffers are allocated in pages (blocks of memory that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes + A few extra pages may be allocated to accommodate buffer management + meta-data. If the last page allocated has room for more bytes than requested, the rest of the page will be used, making the actual allocation bigger than requested or shown. ( Note, the size may not be a multiple of the page size @@ -235,7 +238,7 @@ of ftrace. Here is a list of some of the key files: This interface also allows for commands to be used. See the "Filter commands" section for more details. - As a speed up, since processing strings can't be quite expensive + As a speed up, since processing strings can be quite expensive and requires a check of all functions registered to tracing, instead an index can be written into this file. A number (starting with "1") written will instead select the same corresponding at the line position @@ -382,7 +385,7 @@ of ftrace. Here is a list of some of the key files: By default, 128 comms are saved (see "saved_cmdlines" above). To increase or decrease the amount of comms that are cached, echo - in a the number of comms to cache, into this file. + the number of comms to cache into this file. saved_tgids: @@ -490,6 +493,9 @@ of ftrace. Here is a list of some of the key files: # echo global > trace_clock + Setting a clock clears the ring buffer content as well as the + "snapshot" buffer. + trace_marker: This is a very useful file for synchronizing user space @@ -3324,7 +3330,7 @@ directories after it is created. As you can see, the new directory looks similar to the tracing directory itself. In fact, it is very similar, except that the buffer and -events are agnostic from the main director, or from any other +events are agnostic from the main directory, or from any other instances that are created. The files in the new directory work just like the files with the diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt index ff747b6fa39b..2d53c6f25b91 100644 --- a/Documentation/trace/ring-buffer-design.txt +++ b/Documentation/trace/ring-buffer-design.txt @@ -37,7 +37,7 @@ commit_page - a pointer to the page with the last finished non-nested write. cmpxchg - hardware-assisted atomic transaction that performs the following: - A = B iff previous A == C + A = B if previous A == C R = cmpxchg(A, C, B) is saying that we replace A with B if and only if current A is equal to C, and we put the old (current) A into R diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index f07c40a068b5..2e831ece6e26 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -2413,7 +2413,7 @@ _않습니다_. 알고 있는, - inb() 나 writel() 과 같은 - 적절한 액세스 루틴을 통해 이루어져야만 합니다. 이것들은 대부분의 경우에는 명시적 메모리 배리어 와 함께 사용될 필요가 없습니다만, 완화된 메모리 액세스 속성으로 I/O 메모리 윈도우로의 참조를 위해 -액세스 함수가 사용된다면 순서를 강제하기 위해 _madatory_ 메모리 배리어가 +액세스 함수가 사용된다면 순서를 강제하기 위해 _mandatory_ 메모리 배리어가 필요합니다. 더 많은 정보를 위해선 Documentation/driver-api/device-io.rst 를 참고하십시오. @@ -2528,7 +2528,7 @@ I/O 액세스를 통한 주변장치와의 통신은 아키텍쳐와 기기에 이것들은 readX() 와 writeX() 랑 비슷하지만, 더 완화된 메모리 순서 보장을 제공합니다. 구체적으로, 이것들은 일반적 메모리 액세스나 delay() 루프 (예:앞의 2-5 항목) 에 대해 순서를 보장하지 않습니다만 디폴트 I/O - 기능으로 매핑된 __iomem 포인터에 대해 동작할 때, 같은 CPU 쓰레드에 의해 + 기능으로 매핑된 __iomem 포인터에 대해 동작할 때, 같은 CPU 쓰레드에 의한 같은 주변장치로의 액세스에는 순서가 맞춰질 것이 보장됩니다. (*) readsX(), writesX(): diff --git a/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst b/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst new file mode 100644 index 000000000000..b93f1af68261 --- /dev/null +++ b/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst @@ -0,0 +1,228 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/process/embargoed-hardware-issues.rst <embargoed_hardware_issues>` +:Translator: Alex Shi <alex.shi@linux.alibaba.com> + +被限制的硬件问题 +================ + +范围 +---- + +导致安全问题的硬件问题与只影响Linux内核的纯软件错误是不同的安全错误类别。 + +必须区别对待诸如熔毁(Meltdown)、Spectre、L1TF等硬件问题，因为它们通常会影响 +所有操作系统（“OS”），因此需要在不同的OS供应商、发行版、硬件供应商和其他各方 +之间进行协调。对于某些问题，软件缓解可能依赖于微码或固件更新，这需要进一步的 +协调。 + +.. _zh_Contact: + +接触 +---- + +Linux内核硬件安全小组独立于普通的Linux内核安全小组。 + +该小组只负责协调被限制的硬件安全问题。Linux内核中纯软件安全漏洞的报告不由该 +小组处理，报告者将被引导至常规Linux内核安全小组(:ref:`Documentation/admin-guide/ +<securitybugs>`)联系。 + +可以通过电子邮件 <hardware-security@kernel.org> 与小组联系。这是一份私密的安全 +官名单，他们将帮助您根据我们的文档化流程协调问题。 + +邮件列表是加密的，发送到列表的电子邮件可以通过PGP或S/MIME加密，并且必须使用报告 +者的PGP密钥或S/MIME证书签名。该列表的PGP密钥和S/MIME证书可从 +https://www.kernel.org/.... 获得。 + +虽然硬件安全问题通常由受影响的硬件供应商处理，但我们欢迎发现潜在硬件缺陷的研究 +人员或个人与我们联系。 + +硬件安全官 +^^^^^^^^^^ + +目前的硬件安全官小组: + + - Linus Torvalds（Linux基金会院士） + - Greg Kroah Hartman（Linux基金会院士） + - Thomas Gleixner（Linux基金会院士） + +邮件列表的操作 +^^^^^^^^^^^^^^ + +处理流程中使用的加密邮件列表托管在Linux Foundation的IT基础设施上。通过提供这项 +服务，Linux基金会的IT基础设施安全总监在技术上有能力访问被限制的信息，但根据他 +的雇佣合同，他必须保密。Linux基金会的IT基础设施安全总监还负责 kernel.org 基础 +设施。 + +Linux基金会目前的IT基础设施安全总监是 Konstantin Ryabitsev。 + +保密协议 +-------- + +Linux内核硬件安全小组不是正式的机构，因此无法签订任何保密协议。核心社区意识到 +这些问题的敏感性，并提供了一份谅解备忘录。 + +谅解备忘录 +---------- + +Linux内核社区深刻理解在不同操作系统供应商、发行商、硬件供应商和其他各方之间 +进行协调时，保持硬件安全问题处于限制状态的要求。 + +Linux内核社区在过去已经成功地处理了硬件安全问题，并且有必要的机制允许在限制 +限制下进行符合社区的开发。 + +Linux内核社区有一个专门的硬件安全小组负责初始联系，并监督在限制规则下处理 +此类问题的过程。 + +硬件安全小组确定开发人员（领域专家），他们将组成特定问题的初始响应小组。最初 +的响应小组可以引入更多的开发人员（领域专家）以最佳的技术方式解决这个问题。 + +所有相关开发商承诺遵守限制规定，并对收到的信息保密。违反承诺将导致立即从当前 +问题中排除，并从所有相关邮件列表中删除。此外，硬件安全小组还将把违反者排除在 +未来的问题之外。这一后果的影响在我们社区是一种非常有效的威慑。如果发生违规 +情况，硬件安全小组将立即通知相关方。如果您或任何人发现潜在的违规行为，请立即 +向硬件安全人员报告。 + +流程 +^^^^ + +由于Linux内核开发的全球分布式特性，面对面的会议几乎不可能解决硬件安全问题。 +由于时区和其他因素，电话会议很难协调，只能在绝对必要时使用。加密电子邮件已被 +证明是解决此类问题的最有效和最安全的通信方法。 + +开始披露 +"""""""" + +披露内容首先通过电子邮件联系Linux内核硬件安全小组。此初始联系人应包含问题的 +描述和任何已知受影响硬件的列表。如果您的组织制造或分发受影响的硬件，我们建议 +您也考虑哪些其他硬件可能会受到影响。 + +硬件安全小组将提供一个特定于事件的加密邮件列表，用于与报告者进行初步讨论、 +进一步披露和协调。 + +硬件安全小组将向披露方提供一份开发人员（领域专家）名单，在与开发人员确认他们 +将遵守本谅解备忘录和文件化流程后，应首先告知开发人员有关该问题的信息。这些开发 +人员组成初始响应小组，并在初始接触后负责处理问题。硬件安全小组支持响应小组， +但不一定参与缓解开发过程。 + +虽然个别开发人员可能通过其雇主受到保密协议的保护，但他们不能以Linux内核开发 +人员的身份签订个别保密协议。但是，他们将同意遵守这一书面程序和谅解备忘录。 + +披露方应提供已经或应该被告知该问题的所有其他实体的联系人名单。这有几个目的: + + - 披露的实体列表允许跨行业通信，例如其他操作系统供应商、硬件供应商等。 + + - 可联系已披露的实体，指定应参与缓解措施开发的专家。 + + - 如果需要处理某一问题的专家受雇于某一上市实体或某一上市实体的成员，则响应 + 小组可要求该实体披露该专家。这确保专家也是实体反应小组的一部分。 + +披露 +"""" + +披露方通过特定的加密邮件列表向初始响应小组提供详细信息。 + +根据我们的经验，这些问题的技术文档通常是一个足够的起点，最好通过电子邮件进行 +进一步的技术澄清。 + +缓解开发 +"""""""" + +初始响应小组设置加密邮件列表，或在适当的情况下重新修改现有邮件列表。 + +使用邮件列表接近于正常的Linux开发过程，并且在过去已经成功地用于为各种硬件安全 +问题开发缓解措施。 + +邮件列表的操作方式与正常的Linux开发相同。发布、讨论和审查修补程序，如果同意， +则应用于非公共git存储库，参与开发人员只能通过安全连接访问该存储库。存储库包含 +针对主线内核的主开发分支，并根据需要为稳定的内核版本提供向后移植分支。 + +最初的响应小组将根据需要从Linux内核开发人员社区中确定更多的专家。引进专家可以 +在开发过程中的任何时候发生，需要及时处理。 + +如果专家受雇于披露方提供的披露清单上的实体或其成员，则相关实体将要求其参与。 + +否则，披露方将被告知专家参与的情况。谅解备忘录涵盖了专家，要求披露方确认参与。 +如果披露方有令人信服的理由提出异议，则必须在五个工作日内提出异议，并立即与事件 +小组解决。如果披露方在五个工作日内未作出回应，则视为默许。 + +在确认或解决异议后，专家由事件小组披露，并进入开发过程。 + +协调发布 +"""""""" + +有关各方将协商限制结束的日期和时间。此时，准备好的缓解措施集成到相关的内核树中 +并发布。 + +虽然我们理解硬件安全问题需要协调限制时间，但限制时间应限制在所有有关各方制定、 +测试和准备缓解措施所需的最短时间内。人为地延长限制时间以满足会议讨论日期或其他 +非技术原因，会给相关的开发人员和响应小组带来了更多的工作和负担，因为补丁需要 +保持最新，以便跟踪正在进行的上游内核开发，这可能会造成冲突的更改。 + +CVE分配 +""""""" + +硬件安全小组和初始响应小组都不分配CVE，开发过程也不需要CVE。如果CVE是由披露方 +提供的，则可用于文档中。 + +流程专使 +-------- + +为了协助这一进程，我们在各组织设立了专使，他们可以回答有关报告流程和进一步处理 +的问题或提供指导。专使不参与特定问题的披露，除非响应小组或相关披露方提出要求。 +现任专使名单: + + ============= ======================================================== + ARM + AMD Tom Lendacky <tom.lendacky@amd.com> + IBM + Intel Tony Luck <tony.luck@intel.com> + Qualcomm Trilok Soni <tsoni@codeaurora.org> + + Microsoft Sasha Levin <sashal@kernel.org> + VMware + Xen Andrew Cooper <andrew.cooper3@citrix.com> + + Canonical Tyler Hicks <tyhicks@canonical.com> + Debian Ben Hutchings <ben@decadent.org.uk> + Oracle Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> + Red Hat Josh Poimboeuf <jpoimboe@redhat.com> + SUSE Jiri Kosina <jkosina@suse.cz> + + Amazon + Google Kees Cook <keescook@chromium.org> + ============= ======================================================== + +如果要将您的组织添加到专使名单中，请与硬件安全小组联系。被提名的专使必须完全 +理解和支持我们的过程，并且在Linux内核社区中很容易联系。 + +加密邮件列表 +------------ + +我们使用加密邮件列表进行通信。这些列表的工作原理是，发送到列表的电子邮件使用 +列表的PGP密钥或列表的/MIME证书进行加密。邮件列表软件对电子邮件进行解密，并 +使用订阅者的PGP密钥或S/MIME证书为每个订阅者分别对其进行重新加密。有关邮件列表 +软件和用于确保列表安全和数据保护的设置的详细信息，请访问: +https://www.kernel.org/.... + +关键点 +^^^^^^ + +初次接触见 :ref:`zh_Contact`. 对于特定于事件的邮件列表，密钥和S/MIME证书通过 +特定列表发送的电子邮件传递给订阅者。 + +订阅事件特定列表 +^^^^^^^^^^^^^^^^ + +订阅由响应小组处理。希望参与通信的披露方将潜在订户的列表发送给响应组，以便 +响应组可以验证订阅请求。 + +每个订户都需要通过电子邮件向响应小组发送订阅请求。电子邮件必须使用订阅服务器 +的PGP密钥或S/MIME证书签名。如果使用PGP密钥，则必须从公钥服务器获得该密钥， +并且理想情况下该密钥连接到Linux内核的PGP信任网。另请参见: +https://www.kernel.org/signature.html. + +响应小组验证订阅者，并将订阅者添加到列表中。订阅后，订阅者将收到来自邮件列表 +的电子邮件，该邮件列表使用列表的PGP密钥或列表的/MIME证书签名。订阅者的电子邮件 +客户端可以从签名中提取PGP密钥或S/MIME证书，以便订阅者可以向列表发送加密电子 +邮件。 diff --git a/Documentation/translations/zh_CN/process/index.rst b/Documentation/translations/zh_CN/process/index.rst index be1e764a80d2..8051a7b322c5 100644 --- a/Documentation/translations/zh_CN/process/index.rst +++ b/Documentation/translations/zh_CN/process/index.rst @@ -31,6 +31,8 @@ development-process email-clients license-rules + kernel-enforcement-statement + kernel-driver-statement 其它大多数开发人员感兴趣的社区指南： @@ -43,6 +45,7 @@ stable-api-nonsense stable-kernel-rules management-style + embargoed-hardware-issues 这些是一些总体技术指南，由于缺乏更好的地方，现在已经放在这里 diff --git a/Documentation/translations/zh_CN/process/kernel-driver-statement.rst b/Documentation/translations/zh_CN/process/kernel-driver-statement.rst new file mode 100644 index 000000000000..2b3375bcccfd --- /dev/null +++ b/Documentation/translations/zh_CN/process/kernel-driver-statement.rst @@ -0,0 +1,199 @@ +.. _cn_process_statement_driver: + +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/process/kernel-driver-statement.rst <process_statement_driver>` +:Translator: Alex Shi <alex.shi@linux.alibaba.com> + +内核驱动声明 +------------ + +关于Linux内核模块的立场声明 +=========================== + +我们，以下署名的Linux内核开发人员，认为任何封闭源Linux内核模块或驱动程序都是 +有害的和不可取的。我们已经一再发现它们对Linux用户，企业和更大的Linux生态系统 +有害。这样的模块否定了Linux开发模型的开放性，稳定性，灵活性和可维护性，并使 +他们的用户无法使用Linux社区的专业知识。提供闭源内核模块的供应商迫使其客户 +放弃Linux的主要优势或选择新的供应商。因此，为了充分利用开源所提供的成本节省和 +共享支持优势，我们敦促供应商采取措施，以开源内核代码在Linux上为其客户提供支持。 + +我们只为自己说话，而不是我们今天可能会为之工作，过去或将来会为之工作的任何公司。 + + - Dave Airlie + - Nick Andrew + - Jens Axboe + - Ralf Baechle + - Felipe Balbi + - Ohad Ben-Cohen + - Muli Ben-Yehuda + - Jiri Benc + - Arnd Bergmann + - Thomas Bogendoerfer + - Vitaly Bordug + - James Bottomley + - Josh Boyer + - Neil Brown + - Mark Brown + - David Brownell + - Michael Buesch + - Franck Bui-Huu + - Adrian Bunk + - François Cami + - Ralph Campbell + - Luiz Fernando N. Capitulino + - Mauro Carvalho Chehab + - Denis Cheng + - Jonathan Corbet + - Glauber Costa + - Alan Cox + - Magnus Damm + - Ahmed S. Darwish + - Robert P. J. Day + - Hans de Goede + - Arnaldo Carvalho de Melo + - Helge Deller + - Jean Delvare + - Mathieu Desnoyers + - Sven-Thorsten Dietrich + - Alexey Dobriyan + - Daniel Drake + - Alex Dubov + - Randy Dunlap + - Michael Ellerman + - Pekka Enberg + - Jan Engelhardt + - Mark Fasheh + - J. Bruce Fields + - Larry Finger + - Jeremy Fitzhardinge + - Mike Frysinger + - Kumar Gala + - Robin Getz + - Liam Girdwood + - Jan-Benedict Glaw + - Thomas Gleixner + - Brice Goglin + - Cyrill Gorcunov + - Andy Gospodarek + - Thomas Graf + - Krzysztof Halasa + - Harvey Harrison + - Stephen Hemminger + - Michael Hennerich + - Tejun Heo + - Benjamin Herrenschmidt + - Kristian Høgsberg + - Henrique de Moraes Holschuh + - Marcel Holtmann + - Mike Isely + - Takashi Iwai + - Olof Johansson + - Dave Jones + - Jesper Juhl + - Matthias Kaehlcke + - Kenji Kaneshige + - Jan Kara + - Jeremy Kerr + - Russell King + - Olaf Kirch + - Roel Kluin + - Hans-Jürgen Koch + - Auke Kok + - Peter Korsgaard + - Jiri Kosina + - Aaro Koskinen + - Mariusz Kozlowski + - Greg Kroah-Hartman + - Michael Krufky + - Aneesh Kumar + - Clemens Ladisch + - Christoph Lameter + - Gunnar Larisch + - Anders Larsen + - Grant Likely + - John W. Linville + - Yinghai Lu + - Tony Luck + - Pavel Machek + - Matt Mackall + - Paul Mackerras + - Roland McGrath + - Patrick McHardy + - Kyle McMartin + - Paul Menage + - Thierry Merle + - Eric Miao + - Akinobu Mita + - Ingo Molnar + - James Morris + - Andrew Morton + - Paul Mundt + - Oleg Nesterov + - Luca Olivetti + - S.Çağlar Onur + - Pierre Ossman + - Keith Owens + - Venkatesh Pallipadi + - Nick Piggin + - Nicolas Pitre + - Evgeniy Polyakov + - Richard Purdie + - Mike Rapoport + - Sam Ravnborg + - Gerrit Renker + - Stefan Richter + - David Rientjes + - Luis R. Rodriguez + - Stefan Roese + - Francois Romieu + - Rami Rosen + - Stephen Rothwell + - Maciej W. Rozycki + - Mark Salyzyn + - Yoshinori Sato + - Deepak Saxena + - Holger Schurig + - Amit Shah + - Yoshihiro Shimoda + - Sergei Shtylyov + - Kay Sievers + - Sebastian Siewior + - Rik Snel + - Jes Sorensen + - Alexey Starikovskiy + - Alan Stern + - Timur Tabi + - Hirokazu Takata + - Eliezer Tamir + - Eugene Teo + - Doug Thompson + - FUJITA Tomonori + - Dmitry Torokhov + - Marcelo Tosatti + - Steven Toth + - Theodore Tso + - Matthias Urlichs + - Geert Uytterhoeven + - Arjan van de Ven + - Ivo van Doorn + - Rik van Riel + - Wim Van Sebroeck + - Hans Verkuil + - Horst H. von Brand + - Dmitri Vorobiev + - Anton Vorontsov + - Daniel Walker + - Johannes Weiner + - Harald Welte + - Matthew Wilcox + - Dan J. Williams + - Darrick J. Wong + - David Woodhouse + - Chris Wright + - Bryan Wu + - Rafael J. Wysocki + - Herbert Xu + - Vlad Yasevich + - Peter Zijlstra + - Bartlomiej Zolnierkiewicz diff --git a/Documentation/translations/zh_CN/process/kernel-enforcement-statement.rst b/Documentation/translations/zh_CN/process/kernel-enforcement-statement.rst new file mode 100644 index 000000000000..75f7b7b9137c --- /dev/null +++ b/Documentation/translations/zh_CN/process/kernel-enforcement-statement.rst @@ -0,0 +1,151 @@ +.. _cn_process_statement_kernel: + +.. include:: ../disclaimer-zh_CN.rst + +:Original: :ref:`Documentation/process/kernel-enforcement-statement.rst <process_statement_kernel>` +:Translator: Alex Shi <alex.shi@linux.alibaba.com> + +Linux 内核执行声明 +------------------ + +作为Linux内核的开发人员，我们对如何使用我们的软件以及如何实施软件许可证有着 +浓厚的兴趣。遵守GPL-2.0的互惠共享义务对我们软件和社区的长期可持续性至关重要。 + +虽然有权强制执行对我们社区的贡献中的单独版权权益，但我们有共同的利益，即确保 +个人强制执行行动的方式有利于我们的社区，不会对我们软件生态系统的健康和增长 +产生意外的负面影响。为了阻止无益的执法行动，我们同意代表我们自己和我们版权 +利益的任何继承人对Linux内核用户作出以下符合我们开发社区最大利益的承诺: + + 尽管有GPL-2.0的终止条款，我们同意，采用以下GPL-3.0条款作为我们许可证下的 + 附加许可，作为任何对许可证下权利的非防御性主张，这符合我们开发社区的最佳 + 利益。 + + 但是，如果您停止所有违反本许可证的行为，则您从特定版权持有人处获得的 + 许可证将被恢复：（a）暂时恢复，除非版权持有人明确并最终终止您的许可证； + 以及（b）永久恢复, 如果版权持有人未能在你终止违反后60天内以合理方式 + 通知您违反本许可证的行为，则永久恢复您的许可证。 + + 此外，如果版权所有者以某种合理的方式通知您违反了本许可，这是您第一次 + 从该版权所有者处收到违反本许可的通知（对于任何作品），并且您在收到通知 + 后的30天内纠正违规行为。则您从特定版权所有者处获得的许可将永久恢复. + +我们提供这些保证的目的是鼓励更多地使用该软件。我们希望公司和个人使用、修改和 +分发此软件。我们希望以公开和透明的方式与用户合作，以消除我们对法规遵从性或强制 +执行的任何不确定性，这些不确定性可能会限制我们软件的采用。我们将法律行动视为 +最后手段，只有在其他社区努力未能解决这一问题时才采取行动。 + +最后，一旦一个不合规问题得到解决，我们希望用户会感到欢迎，加入我们为之努力的 +这个项目。共同努力，我们会更强大。 + +除了下面提到的以外，我们只为自己说话，而不是为今天、过去或将来可能为之工作的 +任何公司说话。 + + - Laura Abbott + - Bjorn Andersson (Linaro) + - Andrea Arcangeli + - Neil Armstrong + - Jens Axboe + - Pablo Neira Ayuso + - Khalid Aziz + - Ralf Baechle + - Felipe Balbi + - Arnd Bergmann + - Ard Biesheuvel + - Tim Bird + - Paolo Bonzini + - Christian Borntraeger + - Mark Brown (Linaro) + - Paul Burton + - Javier Martinez Canillas + - Rob Clark + - Kees Cook (Google) + - Jonathan Corbet + - Dennis Dalessandro + - Vivien Didelot (Savoir-faire Linux) + - Hans de Goede + - Mel Gorman (SUSE) + - Sven Eckelmann + - Alex Elder (Linaro) + - Fabio Estevam + - Larry Finger + - Bhumika Goyal + - Andy Gross + - Juergen Gross + - Shawn Guo + - Ulf Hansson + - Stephen Hemminger (Microsoft) + - Tejun Heo + - Rob Herring + - Masami Hiramatsu + - Michal Hocko + - Simon Horman + - Johan Hovold (Hovold Consulting AB) + - Christophe JAILLET + - Olof Johansson + - Lee Jones (Linaro) + - Heiner Kallweit + - Srinivas Kandagatla + - Jan Kara + - Shuah Khan (Samsung) + - David Kershner + - Jaegeuk Kim + - Namhyung Kim + - Colin Ian King + - Jeff Kirsher + - Greg Kroah-Hartman (Linux Foundation) + - Christian König + - Vinod Koul + - Krzysztof Kozlowski + - Viresh Kumar + - Aneesh Kumar K.V + - Julia Lawall + - Doug Ledford + - Chuck Lever (Oracle) + - Daniel Lezcano + - Shaohua Li + - Xin Long + - Tony Luck + - Catalin Marinas (Arm Ltd) + - Mike Marshall + - Chris Mason + - Paul E. McKenney + - Arnaldo Carvalho de Melo + - David S. Miller + - Ingo Molnar + - Kuninori Morimoto + - Trond Myklebust + - Martin K. Petersen (Oracle) + - Borislav Petkov + - Jiri Pirko + - Josh Poimboeuf + - Sebastian Reichel (Collabora) + - Guenter Roeck + - Joerg Roedel + - Leon Romanovsky + - Steven Rostedt (VMware) + - Frank Rowand + - Ivan Safonov + - Anna Schumaker + - Jes Sorensen + - K.Y. Srinivasan + - David Sterba (SUSE) + - Heiko Stuebner + - Jiri Kosina (SUSE) + - Willy Tarreau + - Dmitry Torokhov + - Linus Torvalds + - Thierry Reding + - Rik van Riel + - Luis R. Rodriguez + - Geert Uytterhoeven (Glider bvba) + - Eduardo Valentin (Amazon.com) + - Daniel Vetter + - Linus Walleij + - Richard Weinberger + - Dan Williams + - Rafael J. Wysocki + - Arvind Yadav + - Masahiro Yamada + - Wei Yongjun + - Lv Zheng + - Marc Zyngier (Arm Ltd) diff --git a/Documentation/usb/index.rst b/Documentation/usb/index.rst index e55386a4abfb..36b6ebd9a9d9 100644 --- a/Documentation/usb/index.rst +++ b/Documentation/usb/index.rst @@ -22,11 +22,9 @@ USB support misc_usbsevseg mtouchusb ohci - rio usbip_protocol usbmon usb-serial - wusb-design-overview usb-help text_files diff --git a/Documentation/usb/text_files.rst b/Documentation/usb/text_files.rst index 6a8d3fcf64b6..1c18c05c3920 100644 --- a/Documentation/usb/text_files.rst +++ b/Documentation/usb/text_files.rst @@ -16,12 +16,6 @@ USB devfs drop permissions source .. literalinclude:: usbdevfs-drop-permissions.c :language: c -WUSB command line script to manipulate auth credentials -------------------------------------------------------- - -.. literalinclude:: wusb-cbaf - :language: shell - Credits ------- diff --git a/Documentation/virt/kvm/api.txt b/Documentation/virt/kvm/api.txt index ebb37b34dcfc..3a0c819c3573 100644 --- a/Documentation/virt/kvm/api.txt +++ b/Documentation/virt/kvm/api.txt @@ -2196,6 +2196,15 @@ arm64 CCSIDR registers are demultiplexed by CSSELR value: arm64 system registers have the following id bit patterns: 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3> +WARNING: + Two system register IDs do not follow the specified pattern. These + are KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT, which map to + system registers CNTV_CVAL_EL0 and CNTVCT_EL0 respectively. These + two had their values accidentally swapped, which means TIMER_CVAL is + derived from the register encoding for CNTVCT_EL0 and TIMER_CNT is + derived from the register encoding for CNTV_CVAL_EL0. As this is + API, it must remain this way. + arm64 firmware pseudo-registers have the following bit pattern: 0x6030 0000 0014 <regno:16> diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst index 893a8ba0e9fe..95fec5968362 100644 --- a/Documentation/vm/hmm.rst +++ b/Documentation/vm/hmm.rst @@ -149,14 +149,14 @@ CPU page table into a device page table; HMM helps keep both synchronized. A device driver that wants to mirror a process address space must start with the registration of a mmu_interval_notifier:: - mni->ops = &driver_ops; - int mmu_interval_notifier_insert(struct mmu_interval_notifier *mni, - unsigned long start, unsigned long length, - struct mm_struct *mm); + int mmu_interval_notifier_insert(struct mmu_interval_notifier *interval_sub, + struct mm_struct *mm, unsigned long start, + unsigned long length, + const struct mmu_interval_notifier_ops *ops); -During the driver_ops->invalidate() callback the device driver must perform -the update action to the range (mark range read only, or fully unmap, -etc.). The device must complete the update before the driver callback returns. +During the ops->invalidate() callback the device driver must perform the +update action to the range (mark range read only, or fully unmap, etc.). The +device must complete the update before the driver callback returns. When the device driver wants to populate a range of virtual addresses, it can use:: @@ -183,7 +183,7 @@ The usage pattern is:: struct hmm_range range; ... - range.notifier = &mni; + range.notifier = &interval_sub; range.start = ...; range.end = ...; range.pfns = ...; @@ -191,11 +191,11 @@ The usage pattern is:: range.values = ...; range.pfn_shift = ...; - if (!mmget_not_zero(mni->notifier.mm)) + if (!mmget_not_zero(interval_sub->notifier.mm)) return -EFAULT; again: - range.notifier_seq = mmu_interval_read_begin(&mni); + range.notifier_seq = mmu_interval_read_begin(&interval_sub); down_read(&mm->mmap_sem); ret = hmm_range_fault(&range, HMM_RANGE_SNAPSHOT); if (ret) { diff --git a/Documentation/vm/zswap.rst b/Documentation/vm/zswap.rst index 1444ecd40911..61f6185188cd 100644 --- a/Documentation/vm/zswap.rst +++ b/Documentation/vm/zswap.rst @@ -130,6 +130,19 @@ checking for the same-value filled pages during store operation. However, the existing pages which are marked as same-value filled pages remain stored unchanged in zswap until they are either loaded or invalidated. +To prevent zswap from shrinking pool when zswap is full and there's a high +pressure on swap (this will result in flipping pages in and out zswap pool +without any real benefit but with a performance drop for the system), a +special parameter has been introduced to implement a sort of hysteresis to +refuse taking pages into zswap pool until it has sufficient space if the limit +has been hit. To set the threshold at which zswap would start accepting pages +again after it became full, use the sysfs ``accept_threhsold_percent`` +attribute, e. g.:: + + echo 80 > /sys/module/zswap/parameters/accept_threhsold_percent + +Setting this parameter to 100 will disable the hysteresis. + A debugfs interface is provided for various statistic about pool size, number of pages stored, same-value filled pages and various counters for the reasons pages are rejected. diff --git a/Documentation/w1/masters/omap-hdq.rst b/Documentation/w1/masters/omap-hdq.rst index 345298a59e50..5347b5d9e90a 100644 --- a/Documentation/w1/masters/omap-hdq.rst +++ b/Documentation/w1/masters/omap-hdq.rst @@ -44,7 +44,7 @@ that the ID used should be same for both master and slave driver loading. e.g:: insmod omap_hdq.ko W1_ID=2 - inamod w1_bq27000.ko F_ID=2 + insmod w1_bq27000.ko F_ID=2 The driver also supports 1-wire mode. In this mode, there is no need to pass slave ID as parameter. The driver will auto-detect slaves connected diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst index 692ce57ac140..c9c201596c3e 100644 --- a/Documentation/x86/boot.rst +++ b/Documentation/x86/boot.rst @@ -69,11 +69,12 @@ Protocol 2.13 (Kernel 3.14) Support 32- and 64-bit flags being set in xloadflags to support booting a 64-bit kernel from 32-bit EFI -Protocol 2.14: BURNT BY INCORRECT COMMIT ae7e1238e68f2a472a125673ab506d49158c1889 +Protocol 2.14 BURNT BY INCORRECT COMMIT + ae7e1238e68f2a472a125673ab506d49158c1889 (x86/boot: Add ACPI RSDP address to setup_header) DO NOT USE!!! ASSUME SAME AS 2.13. -Protocol 2.15: (Kernel 5.5) Added the kernel_info and kernel_info.setup_type_max. +Protocol 2.15 (Kernel 5.5) Added the kernel_info and kernel_info.setup_type_max. ============= ============================================================ .. note:: @@ -834,14 +835,14 @@ Protocol: 2.09+ chunks of memory are occupied by kernel data. Thus setup_indirect struct and SETUP_INDIRECT type were introduced in - protocol 2.15. + protocol 2.15:: - struct setup_indirect { - __u32 type; - __u32 reserved; /* Reserved, must be set to zero. */ - __u64 len; - __u64 addr; - }; + struct setup_indirect { + __u32 type; + __u32 reserved; /* Reserved, must be set to zero. */ + __u64 len; + __u64 addr; + }; The type member is a SETUP_INDIRECT | SETUP_* type. However, it cannot be SETUP_INDIRECT itself since making the setup_indirect a tree structure @@ -849,19 +850,19 @@ Protocol: 2.09+ and stack space can be limited in boot contexts. Let's give an example how to point to SETUP_E820_EXT data using setup_indirect. - In this case setup_data and setup_indirect will look like this: - - struct setup_data { - __u64 next = 0 or <addr_of_next_setup_data_struct>; - __u32 type = SETUP_INDIRECT; - __u32 len = sizeof(setup_data); - __u8 data[sizeof(setup_indirect)] = struct setup_indirect { - __u32 type = SETUP_INDIRECT | SETUP_E820_EXT; - __u32 reserved = 0; - __u64 len = <len_of_SETUP_E820_EXT_data>; - __u64 addr = <addr_of_SETUP_E820_EXT_data>; + In this case setup_data and setup_indirect will look like this:: + + struct setup_data { + __u64 next = 0 or <addr_of_next_setup_data_struct>; + __u32 type = SETUP_INDIRECT; + __u32 len = sizeof(setup_data); + __u8 data[sizeof(setup_indirect)] = struct setup_indirect { + __u32 type = SETUP_INDIRECT | SETUP_E820_EXT; + __u32 reserved = 0; + __u64 len = <len_of_SETUP_E820_EXT_data>; + __u64 addr = <addr_of_SETUP_E820_EXT_data>; + } } - } .. note:: SETUP_INDIRECT | SETUP_NONE objects cannot be properly distinguished @@ -964,7 +965,7 @@ expected to copy into a setup_data chunk. All kernel_info data should be part of this structure. Fixed size data have to be put before kernel_info_var_len_data label. Variable size data have to be put after kernel_info_var_len_data label. Each chunk of variable size data has to -be prefixed with header/magic and its size, e.g.: +be prefixed with header/magic and its size, e.g.:: kernel_info: .ascii "LToP" /* Header, Linux top (structure). */ diff --git a/Documentation/x86/intel_mpx.rst b/Documentation/x86/intel_mpx.rst deleted file mode 100644 index 387a640941a6..000000000000 --- a/Documentation/x86/intel_mpx.rst +++ /dev/null @@ -1,252 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=========================================== -Intel(R) Memory Protection Extensions (MPX) -=========================================== - -Intel(R) MPX Overview -===================== - -Intel(R) Memory Protection Extensions (Intel(R) MPX) is a new capability -introduced into Intel Architecture. Intel MPX provides hardware features -that can be used in conjunction with compiler changes to check memory -references, for those references whose compile-time normal intentions are -usurped at runtime due to buffer overflow or underflow. - -You can tell if your CPU supports MPX by looking in /proc/cpuinfo:: - - cat /proc/cpuinfo | grep ' mpx ' - -For more information, please refer to Intel(R) Architecture Instruction -Set Extensions Programming Reference, Chapter 9: Intel(R) Memory Protection -Extensions. - -Note: As of December 2014, no hardware with MPX is available but it is -possible to use SDE (Intel(R) Software Development Emulator) instead, which -can be downloaded from -http://software.intel.com/en-us/articles/intel-software-development-emulator - - -How to get the advantage of MPX -=============================== - -For MPX to work, changes are required in the kernel, binutils and compiler. -No source changes are required for applications, just a recompile. - -There are a lot of moving parts of this to all work right. The following -is how we expect the compiler, application and kernel to work together. - -1) Application developer compiles with -fmpx. The compiler will add the - instrumentation as well as some setup code called early after the app - starts. New instruction prefixes are noops for old CPUs. -2) That setup code allocates (virtual) space for the "bounds directory", - points the "bndcfgu" register to the directory (must also set the valid - bit) and notifies the kernel (via the new prctl(PR_MPX_ENABLE_MANAGEMENT)) - that the app will be using MPX. The app must be careful not to access - the bounds tables between the time when it populates "bndcfgu" and - when it calls the prctl(). This might be hard to guarantee if the app - is compiled with MPX. You can add "__attribute__((bnd_legacy))" to - the function to disable MPX instrumentation to help guarantee this. - Also be careful not to call out to any other code which might be - MPX-instrumented. -3) The kernel detects that the CPU has MPX, allows the new prctl() to - succeed, and notes the location of the bounds directory. Userspace is - expected to keep the bounds directory at that location. We note it - instead of reading it each time because the 'xsave' operation needed - to access the bounds directory register is an expensive operation. -4) If the application needs to spill bounds out of the 4 registers, it - issues a bndstx instruction. Since the bounds directory is empty at - this point, a bounds fault (#BR) is raised, the kernel allocates a - bounds table (in the user address space) and makes the relevant entry - in the bounds directory point to the new table. -5) If the application violates the bounds specified in the bounds registers, - a separate kind of #BR is raised which will deliver a signal with - information about the violation in the 'struct siginfo'. -6) Whenever memory is freed, we know that it can no longer contain valid - pointers, and we attempt to free the associated space in the bounds - tables. If an entire table becomes unused, we will attempt to free - the table and remove the entry in the directory. - -To summarize, there are essentially three things interacting here: - -GCC with -fmpx: - * enables annotation of code with MPX instructions and prefixes - * inserts code early in the application to call in to the "gcc runtime" -GCC MPX Runtime: - * Checks for hardware MPX support in cpuid leaf - * allocates virtual space for the bounds directory (malloc() essentially) - * points the hardware BNDCFGU register at the directory - * calls a new prctl(PR_MPX_ENABLE_MANAGEMENT) to notify the kernel to - start managing the bounds directories -Kernel MPX Code: - * Checks for hardware MPX support in cpuid leaf - * Handles #BR exceptions and sends SIGSEGV to the app when it violates - bounds, like during a buffer overflow. - * When bounds are spilled in to an unallocated bounds table, the kernel - notices in the #BR exception, allocates the virtual space, then - updates the bounds directory to point to the new table. It keeps - special track of the memory with a VM_MPX flag. - * Frees unused bounds tables at the time that the memory they described - is unmapped. - - -How does MPX kernel code work -============================= - -Handling #BR faults caused by MPX ---------------------------------- - -When MPX is enabled, there are 2 new situations that can generate -#BR faults. - - * new bounds tables (BT) need to be allocated to save bounds. - * bounds violation caused by MPX instructions. - -We hook #BR handler to handle these two new situations. - -On-demand kernel allocation of bounds tables --------------------------------------------- - -MPX only has 4 hardware registers for storing bounds information. If -MPX-enabled code needs more than these 4 registers, it needs to spill -them somewhere. It has two special instructions for this which allow -the bounds to be moved between the bounds registers and some new "bounds -tables". - -#BR exceptions are a new class of exceptions just for MPX. They are -similar conceptually to a page fault and will be raised by the MPX -hardware during both bounds violations or when the tables are not -present. The kernel handles those #BR exceptions for not-present tables -by carving the space out of the normal processes address space and then -pointing the bounds-directory over to it. - -The tables need to be accessed and controlled by userspace because -the instructions for moving bounds in and out of them are extremely -frequent. They potentially happen every time a register points to -memory. Any direct kernel involvement (like a syscall) to access the -tables would obviously destroy performance. - -Why not do this in userspace? MPX does not strictly require anything in -the kernel. It can theoretically be done completely from userspace. Here -are a few ways this could be done. We don't think any of them are practical -in the real-world, but here they are. - -:Q: Can virtual space simply be reserved for the bounds tables so that we - never have to allocate them? -:A: MPX-enabled application will possibly create a lot of bounds tables in - process address space to save bounds information. These tables can take - up huge swaths of memory (as much as 80% of the memory on the system) - even if we clean them up aggressively. In the worst-case scenario, the - tables can be 4x the size of the data structure being tracked. IOW, a - 1-page structure can require 4 bounds-table pages. An X-GB virtual - area needs 4*X GB of virtual space, plus 2GB for the bounds directory. - If we were to preallocate them for the 128TB of user virtual address - space, we would need to reserve 512TB+2GB, which is larger than the - entire virtual address space today. This means they can not be reserved - ahead of time. Also, a single process's pre-populated bounds directory - consumes 2GB of virtual *AND* physical memory. IOW, it's completely - infeasible to prepopulate bounds directories. - -:Q: Can we preallocate bounds table space at the same time memory is - allocated which might contain pointers that might eventually need - bounds tables? -:A: This would work if we could hook the site of each and every memory - allocation syscall. This can be done for small, constrained applications. - But, it isn't practical at a larger scale since a given app has no - way of controlling how all the parts of the app might allocate memory - (think libraries). The kernel is really the only place to intercept - these calls. - -:Q: Could a bounds fault be handed to userspace and the tables allocated - there in a signal handler instead of in the kernel? -:A: mmap() is not on the list of safe async handler functions and even - if mmap() would work it still requires locking or nasty tricks to - keep track of the allocation state there. - -Having ruled out all of the userspace-only approaches for managing -bounds tables that we could think of, we create them on demand in -the kernel. - -Decoding MPX instructions -------------------------- - -If a #BR is generated due to a bounds violation caused by MPX. -We need to decode MPX instructions to get violation address and -set this address into extended struct siginfo. - -The _sigfault field of struct siginfo is extended as follow:: - - 87 /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - 88 struct { - 89 void __user *_addr; /* faulting insn/memory ref. */ - 90 #ifdef __ARCH_SI_TRAPNO - 91 int _trapno; /* TRAP # which caused the signal */ - 92 #endif - 93 short _addr_lsb; /* LSB of the reported address */ - 94 struct { - 95 void __user *_lower; - 96 void __user *_upper; - 97 } _addr_bnd; - 98 } _sigfault; - -The '_addr' field refers to violation address, and new '_addr_and' -field refers to the upper/lower bounds when a #BR is caused. - -Glibc will be also updated to support this new siginfo. So user -can get violation address and bounds when bounds violations occur. - -Cleanup unused bounds tables ----------------------------- - -When a BNDSTX instruction attempts to save bounds to a bounds directory -entry marked as invalid, a #BR is generated. This is an indication that -no bounds table exists for this entry. In this case the fault handler -will allocate a new bounds table on demand. - -Since the kernel allocated those tables on-demand without userspace -knowledge, it is also responsible for freeing them when the associated -mappings go away. - -Here, the solution for this issue is to hook do_munmap() to check -whether one process is MPX enabled. If yes, those bounds tables covered -in the virtual address region which is being unmapped will be freed also. - -Adding new prctl commands -------------------------- - -Two new prctl commands are added to enable and disable MPX bounds tables -management in kernel. -:: - - 155 #define PR_MPX_ENABLE_MANAGEMENT 43 - 156 #define PR_MPX_DISABLE_MANAGEMENT 44 - -Runtime library in userspace is responsible for allocation of bounds -directory. So kernel have to use XSAVE instruction to get the base -of bounds directory from BNDCFG register. - -But XSAVE is expected to be very expensive. In order to do performance -optimization, we have to get the base of bounds directory and save it -into struct mm_struct to be used in future during PR_MPX_ENABLE_MANAGEMENT -command execution. - - -Special rules -============= - -1) If userspace is requesting help from the kernel to do the management -of bounds tables, it may not create or modify entries in the bounds directory. - -Certainly users can allocate bounds tables and forcibly point the bounds -directory at them through XSAVE instruction, and then set valid bit -of bounds entry to have this entry valid. But, the kernel will decline -to assist in managing these tables. - -2) Userspace may not take multiple bounds directory entries and point -them at the same bounds table. - -This is allowed architecturally. See more information "Intel(R) Architecture -Instruction Set Extensions Programming Reference" (9.3.4). - -However, if users did this, the kernel might be fooled in to unmapping an -in-use bounds table since it does not recognize sharing. diff --git a/Documentation/x86/x86_64/mm.rst b/Documentation/x86/x86_64/mm.rst index 267fc4808945..e5053404a1ae 100644 --- a/Documentation/x86/x86_64/mm.rst +++ b/Documentation/x86/x86_64/mm.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -================ -Memory Managment -================ +================= +Memory Management +================= Complete virtual memory map with 4-level page tables ==================================================== |