aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/00-INDEX28
-rw-r--r--Documentation/ABI/stable/sysfs-class-tpm22
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-uvc265
-rw-r--r--Documentation/ABI/testing/sysfs-bus-amba20
-rw-r--r--Documentation/ABI/testing/sysfs-bus-event_source-devices-events6
-rw-r--r--Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x722
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio200
-rw-r--r--Documentation/ABI/testing/sysfs-class-cxl67
-rw-r--r--Documentation/ABI/testing/sysfs-class-mei15
-rw-r--r--Documentation/ABI/testing/sysfs-class-power42
-rw-r--r--Documentation/ABI/testing/sysfs-driver-input-axp-pek11
-rw-r--r--Documentation/ABI/testing/sysfs-fs-f2fs6
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-livepatch44
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dell-laptop60
-rw-r--r--Documentation/Changes6
-rw-r--r--Documentation/CodingStyle1
-rw-r--r--Documentation/DocBook/80211.tmpl5
-rw-r--r--Documentation/DocBook/Makefile2
-rw-r--r--Documentation/DocBook/crypto-API.tmpl2
-rw-r--r--Documentation/DocBook/drm.tmpl126
-rw-r--r--Documentation/DocBook/kgdb.tmpl81
-rw-r--r--Documentation/DocBook/media/v4l/controls.xml11
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml99
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-srggb12.xml2
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt.xml1
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml8
-rw-r--r--Documentation/DocBook/uio-howto.tmpl14
-rw-r--r--Documentation/RCU/stallwarn.txt16
-rw-r--r--Documentation/RCU/trace.txt32
-rw-r--r--Documentation/SubmittingPatches452
-rw-r--r--Documentation/acpi/enumeration.txt2
-rw-r--r--Documentation/arm/00-INDEX12
-rw-r--r--Documentation/arm/Samsung-S3C24XX/DMA.txt46
-rw-r--r--Documentation/arm64/legacy_instructions.txt12
-rw-r--r--Documentation/blackfin/Makefile2
-rw-r--r--Documentation/cachetlb.txt8
-rw-r--r--Documentation/cgroups/00-INDEX2
-rw-r--r--Documentation/cgroups/unified-hierarchy.txt79
-rw-r--r--Documentation/cpu-freq/intel-pstate.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/arm-boards2
-rw-r--r--Documentation/devicetree/bindings/arm/brcm-brcmstb.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/fw-cfg.txt72
-rw-r--r--Documentation/devicetree/bindings/arm/gic.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/l2cc.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/msm/timer.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/sprd.txt11
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt5
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/versatile-sysreg.txt10
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt9
-rw-r--r--Documentation/devicetree/bindings/ata/cavium-compact-flash.txt2
-rw-r--r--Documentation/devicetree/bindings/ata/tegra-sata.txt4
-rw-r--r--Documentation/devicetree/bindings/c6x/dscr.txt2
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt110
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt2
-rw-r--r--Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt53
-rw-r--r--Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt50
-rw-r--r--Documentation/devicetree/bindings/drm/msm/hdmi.txt2
-rw-r--r--Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt17
-rw-r--r--Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt10
-rw-r--r--Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt20
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-max732x.txt59
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt2
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-sx150x.txt40
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt32
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio.txt5
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.txt4
-rw-r--r--Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt8
-rw-r--r--Documentation/devicetree/bindings/gpu/st,stih4xx.txt29
-rw-r--r--Documentation/devicetree/bindings/graph.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-st.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt10
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt3
-rw-r--r--Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt22
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt129
-rw-r--r--Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/sensorhub.txt25
-rw-r--r--Documentation/devicetree/bindings/input/e3x0-button.txt25
-rw-r--r--Documentation/devicetree/bindings/input/regulator-haptic.txt21
-rw-r--r--Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt62
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sun4i.txt4
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt15
-rw-r--r--Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt17
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt21
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt5
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt28
-rw-r--r--Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt41
-rw-r--r--Documentation/devicetree/bindings/leds/common.txt30
-rw-r--r--Documentation/devicetree/bindings/mailbox/altera-mailbox.txt49
-rw-r--r--Documentation/devicetree/bindings/media/atmel-isi.txt2
-rw-r--r--Documentation/devicetree/bindings/media/i2c/nokia,smia.txt63
-rw-r--r--Documentation/devicetree/bindings/media/sunxi-ir.txt4
-rw-r--r--Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt61
-rw-r--r--Documentation/devicetree/bindings/media/video-interfaces.txt5
-rw-r--r--Documentation/devicetree/bindings/mfd/max77686.txt14
-rw-r--r--Documentation/devicetree/bindings/mfd/max77693.txt45
-rw-r--r--Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt9
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt25
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt25
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc.txt62
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt6
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt30
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-pxa.txt15
-rw-r--r--Documentation/devicetree/bindings/mtd/fsmc-nand.txt2
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt21
-rw-r--r--Documentation/devicetree/bindings/net/broadcom-systemport.txt2
-rw-r--r--Documentation/devicetree/bindings/net/davicom-dm9000.txt4
-rw-r--r--Documentation/devicetree/bindings/net/davinci_emac.txt3
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt2
-rw-r--r--Documentation/devicetree/bindings/net/fsl-tsec-phy.txt11
-rw-r--r--Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt88
-rw-r--r--Documentation/devicetree/bindings/net/keystone-netcp.txt197
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st21nfca.txt11
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st21nfcb.txt4
-rw-r--r--Documentation/devicetree/bindings/net/rockchip-dwmac.txt68
-rw-r--r--Documentation/devicetree/bindings/net/sti-dwmac.txt14
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt1
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt30
-rw-r--r--Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt8
-rw-r--r--Documentation/devicetree/bindings/pci/versatile.txt59
-rw-r--r--Documentation/devicetree/bindings/phy/phy-miphy28lp.txt43
-rw-r--r--Documentation/devicetree/bindings/phy/phy-miphy365x.txt15
-rw-r--r--Documentation/devicetree/bindings/phy/phy-stih407-usb.txt10
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt37
-rw-r--r--Documentation/devicetree/bindings/phy/samsung-phy.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt186
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt9
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt12
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt35
-rw-r--r--Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt104
-rw-r--r--Documentation/devicetree/bindings/power/ltc2941.txt27
-rw-r--r--Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt13
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.txt2
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/fman.txt70
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/lbc.txt18
-rw-r--r--Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt7
-rw-r--r--Documentation/devicetree/bindings/regulator/da9211.txt7
-rw-r--r--Documentation/devicetree/bindings/regulator/isl9305.txt4
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6397-regulator.txt217
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt94
-rw-r--r--Documentation/devicetree/bindings/rtc/armada-380-rtc.txt22
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl12057.txt78
-rw-r--r--Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt4
-rw-r--r--Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt16
-rw-r--r--Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt36
-rw-r--r--Documentation/devicetree/bindings/serial/digicolor-usart.txt27
-rw-r--r--Documentation/devicetree/bindings/serial/of-serial.txt5
-rw-r--r--Documentation/devicetree/bindings/serial/sirf-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/sprd-uart.txt7
-rw-r--r--Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt23
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/bman.txt12
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/qman.txt14
-rw-r--r--Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt18
-rw-r--r--Documentation/devicetree/bindings/sound/designware-i2s.txt31
-rw-r--r--Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt23
-rw-r--r--Documentation/devicetree/bindings/sound/max98357a.txt14
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt67
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/pcm512x.txt28
-rw-r--r--Documentation/devicetree/bindings/sound/samsung-i2s.txt22
-rw-r--r--Documentation/devicetree/bindings/sound/simple-card.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/st,sta32x.txt92
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic3x.txt10
-rw-r--r--Documentation/devicetree/bindings/sound/ts3a227e.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/wm8904.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt16
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sirf.txt41
-rw-r--r--Documentation/devicetree/bindings/spi/spi-st-ssc.txt40
-rw-r--r--Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt4
-rw-r--r--Documentation/devicetree/bindings/submitting-patches.txt23
-rw-r--r--Documentation/devicetree/bindings/thermal/tegra-soctherm.txt4
-rw-r--r--Documentation/devicetree/bindings/timer/digicolor-timer.txt18
-rw-r--r--Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt4
-rw-r--r--Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt18
-rw-r--r--Documentation/devicetree/bindings/unittest.txt59
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt5
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt5
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt5
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/usb-ehci.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt10
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt22
-rw-r--r--Documentation/devicetree/bindings/video/bridge/ps8622.txt31
-rw-r--r--Documentation/devicetree/bindings/video/bridge/ptn3460.txt (renamed from Documentation/devicetree/bindings/drm/bridge/ptn3460.txt)16
-rw-r--r--Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt46
-rw-r--r--Documentation/devicetree/bindings/video/exynos7-decon.txt68
-rw-r--r--Documentation/devicetree/bindings/video/exynos_dp.txt12
-rw-r--r--Documentation/devicetree/bindings/video/exynos_mixer.txt1
-rw-r--r--Documentation/devicetree/bindings/video/renesas,du.txt4
-rw-r--r--Documentation/devicetree/bindings/video/ti,dra7-dss.txt69
-rw-r--r--Documentation/devicetree/bindings/video/ti,opa362.txt38
-rw-r--r--Documentation/devicetree/overlay-notes.txt4
-rw-r--r--Documentation/dmaengine/00-INDEX8
-rw-r--r--Documentation/driver-model/bus.txt2
-rw-r--r--Documentation/driver-model/devres.txt2
-rw-r--r--Documentation/filesystems/00-INDEX5
-rw-r--r--Documentation/filesystems/Locking3
-rw-r--r--Documentation/filesystems/dax.txt94
-rw-r--r--Documentation/filesystems/ext2.txt5
-rw-r--r--Documentation/filesystems/ext4.txt4
-rw-r--r--Documentation/filesystems/f2fs.txt6
-rw-r--r--Documentation/filesystems/fiemap.txt3
-rw-r--r--Documentation/filesystems/inotify.txt197
-rw-r--r--Documentation/filesystems/nfs/nfs41-server.txt23
-rw-r--r--Documentation/filesystems/nfs/pnfs-block-server.txt37
-rw-r--r--Documentation/filesystems/nfs/pnfs.txt13
-rw-r--r--Documentation/filesystems/ocfs2.txt4
-rw-r--r--Documentation/filesystems/proc.txt62
-rw-r--r--Documentation/filesystems/seq_file.txt12
-rw-r--r--Documentation/filesystems/vfs.txt7
-rw-r--r--Documentation/filesystems/xfs.txt22
-rw-r--r--Documentation/filesystems/xip.txt68
-rw-r--r--Documentation/futex-requeue-pi.txt8
-rw-r--r--Documentation/gpio/board.txt2
-rw-r--r--Documentation/hwmon/ina2xx23
-rw-r--r--Documentation/kasan.txt170
-rw-r--r--Documentation/kernel-parameters.txt30
-rw-r--r--Documentation/kprobes.txt3
-rw-r--r--Documentation/locking/00-INDEX16
-rw-r--r--Documentation/locking/lockdep-design.txt2
-rw-r--r--Documentation/locking/lockstat.txt5
-rw-r--r--Documentation/memory-barriers.txt46
-rw-r--r--Documentation/misc-devices/mei/mei-client-bus.txt17
-rw-r--r--Documentation/misc-devices/mei/mei.txt126
-rw-r--r--Documentation/networking/00-INDEX8
-rw-r--r--Documentation/networking/can.txt2
-rw-r--r--Documentation/networking/filter.txt4
-rw-r--r--Documentation/networking/ip-sysctl.txt31
-rw-r--r--Documentation/networking/netlink_mmap.txt13
-rw-r--r--Documentation/networking/nf_conntrack-sysctl.txt3
-rw-r--r--Documentation/networking/openvswitch.txt13
-rw-r--r--Documentation/networking/timestamping.txt21
-rw-r--r--Documentation/networking/timestamping/txtimestamp.c38
-rw-r--r--Documentation/nommu-mmap.txt8
-rw-r--r--Documentation/oops-tracing.txt2
-rw-r--r--Documentation/power/s2ram.txt4
-rw-r--r--Documentation/rfkill.txt3
-rw-r--r--Documentation/s390/Debugging390.txt493
-rw-r--r--Documentation/scheduler/completion.txt236
-rw-r--r--Documentation/security/keys.txt2
-rw-r--r--Documentation/stable_kernel_rules.txt44
-rw-r--r--Documentation/sysctl/kernel.txt1
-rw-r--r--Documentation/sysctl/net.txt8
-rw-r--r--Documentation/sysctl/vm.txt14
-rwxr-xr-xDocumentation/target/tcm_mod_builder.py49
-rw-r--r--Documentation/thermal/cpu-cooling-api.txt15
-rw-r--r--Documentation/trace/coresight.txt4
-rw-r--r--Documentation/trace/ftrace.txt2
-rw-r--r--Documentation/usb/gadget-testing.txt728
-rw-r--r--Documentation/usb/gadget_serial.txt8
-rw-r--r--Documentation/usb/usbmon.txt4
-rw-r--r--Documentation/video4linux/CQcam.txt205
-rw-r--r--Documentation/video4linux/README.tlg230047
-rw-r--r--Documentation/video4linux/v4l2-framework.txt25
-rw-r--r--Documentation/video4linux/v4l2-pci-skeleton.c2
-rw-r--r--Documentation/video4linux/w9966.txt33
-rw-r--r--Documentation/virtual/kvm/api.txt35
-rw-r--r--Documentation/virtual/kvm/devices/arm-vgic.txt37
-rw-r--r--Documentation/virtual/kvm/devices/vm.txt59
-rw-r--r--Documentation/vm/cleancache.txt2
-rw-r--r--Documentation/vm/pagemap.txt8
-rw-r--r--Documentation/vm/remap_file_pages.txt7
-rw-r--r--Documentation/x86/entry_64.txt18
-rw-r--r--Documentation/x86/x86_64/kernel-stacks8
-rw-r--r--Documentation/x86/x86_64/mm.txt2
280 files changed, 7482 insertions, 1726 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 1750fcef1ab4..cd077ca0e1b8 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -29,8 +29,6 @@ DMA-ISA-LPC.txt
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
-dmatest.txt
- - how to compile, configure and use the dmatest system.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
EDID/
@@ -163,8 +161,6 @@ digsig.txt
-info on the Digital Signature Verification API
dma-buf-sharing.txt
- the DMA Buffer Sharing API Guide
-dmaengine.txt
- -the DMA Engine API Guide
dontdiff
- file containing a list of files that should never be diff'ed.
driver-model/
@@ -209,6 +205,8 @@ hid/
- directory with information on human interface devices
highuid.txt
- notes on the change from 16 bit to 32 bit user/group IDs.
+hsi.txt
+ - HSI subsystem overview.
hwspinlock.txt
- hardware spinlock provides hardware assistance for synchronization
timers/
@@ -277,6 +275,8 @@ kprobes.txt
- documents the kernel probes debugging feature.
kref.txt
- docs on adding reference counters (krefs) to kernel objects.
+kselftest.txt
+ - small unittests for (some) individual codepaths in the kernel.
laptops/
- directory with laptop related info and laptop driver documentation.
ldm.txt
@@ -285,22 +285,22 @@ leds/
- directory with info about LED handling under Linux.
local_ops.txt
- semantics and behavior of local atomic operations.
-lockdep-design.txt
- - documentation on the runtime locking correctness validator.
locking/
- directory with info about kernel locking primitives
-lockstat.txt
- - info on collecting statistics on locks (and contention).
lockup-watchdogs.txt
- info on soft and hard lockup detectors (aka nmi_watchdog).
logo.gif
- full colour GIF image of Linux logo (penguin - Tux).
logo.txt
- info on creator of above logo & site to get additional images from.
+lzo.txt
+ - kernel LZO decompressor input formats
m68k/
- directory with info about Linux on Motorola 68k architecture.
magic-number.txt
- list of magic numbers used to mark/protect kernel data structures.
+mailbox.txt
+ - How to write drivers for the common mailbox framework (IPC).
md.txt
- info on boot arguments for the multiple devices driver.
media-framework.txt
@@ -327,8 +327,6 @@ mtd/
- directory with info about memory technology devices (flash)
mono.txt
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
-mutex-design.txt
- - info on the generic mutex subsystem.
namespaces/
- directory with various information about namespaces
netlabel/
@@ -395,10 +393,6 @@ robust-futexes.txt
- a description of what robust futexes are.
rpmsg.txt
- info on the Remote Processor Messaging (rpmsg) Framework
-rt-mutex-design.txt
- - description of the RealTime mutex implementation design.
-rt-mutex.txt
- - desc. of RT-mutex subsystem with PI (Priority Inheritance) support.
rtc.txt
- notes on how to use the Real Time Clock (aka CMOS clock) driver.
s390/
@@ -425,8 +419,6 @@ sparse.txt
- info on how to obtain and use the sparse tool for typechecking.
spi/
- overview of Linux kernel Serial Peripheral Interface (SPI) support.
-spinlocks.txt
- - info on using spinlocks to provide exclusive access in kernel.
stable_api_nonsense.txt
- info on why the kernel does not have a stable in-kernel api or abi.
stable_kernel_rules.txt
@@ -483,10 +475,10 @@ wimax/
- directory with info about Intel Wireless Wimax Connections
workqueue.txt
- information on the Concurrency Managed Workqueue implementation
-ww-mutex-design.txt
- - Intro to Mutex wait/would deadlock handling.s
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
+xillybus.txt
+ - Overview and basic ui of xillybus driver
xtensa/
- directory with documents relating to arch/xtensa port/implementation
xz.txt
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
index a60b45e2493b..9f790eebb5d2 100644
--- a/Documentation/ABI/stable/sysfs-class-tpm
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -1,4 +1,4 @@
-What: /sys/class/misc/tpmX/device/
+What: /sys/class/tpm/tpmX/device/
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
@@ -6,7 +6,7 @@ Description: The device/ directory under a specific TPM instance exposes
the properties of that TPM chip
-What: /sys/class/misc/tpmX/device/active
+What: /sys/class/tpm/tpmX/device/active
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
@@ -18,7 +18,7 @@ Description: The "active" property prints a '1' if the TPM chip is accepting
section 17 for more information on which commands are
available.
-What: /sys/class/misc/tpmX/device/cancel
+What: /sys/class/tpm/tpmX/device/cancel
Date: June 2005
KernelVersion: 2.6.13
Contact: tpmdd-devel@lists.sf.net
@@ -26,7 +26,7 @@ Description: The "cancel" property allows you to cancel the currently
pending TPM command. Writing any value to cancel will call the
TPM vendor specific cancel operation.
-What: /sys/class/misc/tpmX/device/caps
+What: /sys/class/tpm/tpmX/device/caps
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
@@ -43,7 +43,7 @@ Description: The "caps" property contains TPM manufacturer and version info.
the chip supports. Firmware version is that of the chip and
is manufacturer specific.
-What: /sys/class/misc/tpmX/device/durations
+What: /sys/class/tpm/tpmX/device/durations
Date: March 2011
KernelVersion: 3.1
Contact: tpmdd-devel@lists.sf.net
@@ -66,7 +66,7 @@ Description: The "durations" property shows the 3 vendor-specific values
scaled to be displayed in usecs. In this case "[adjusted]"
will be displayed in place of "[original]".
-What: /sys/class/misc/tpmX/device/enabled
+What: /sys/class/tpm/tpmX/device/enabled
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
@@ -75,7 +75,7 @@ Description: The "enabled" property prints a '1' if the TPM chip is enabled,
may be visible but produce a '0' after some operation that
disables the TPM.
-What: /sys/class/misc/tpmX/device/owned
+What: /sys/class/tpm/tpmX/device/owned
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
@@ -83,7 +83,7 @@ Description: The "owned" property produces a '1' if the TPM_TakeOwnership
ordinal has been executed successfully in the chip. A '0'
indicates that ownership hasn't been taken.
-What: /sys/class/misc/tpmX/device/pcrs
+What: /sys/class/tpm/tpmX/device/pcrs
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
@@ -106,7 +106,7 @@ Description: The "pcrs" property will dump the current value of all Platform
1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
long. Use the "caps" property to determine TPM version.
-What: /sys/class/misc/tpmX/device/pubek
+What: /sys/class/tpm/tpmX/device/pubek
Date: April 2005
KernelVersion: 2.6.12
Contact: tpmdd-devel@lists.sf.net
@@ -158,7 +158,7 @@ Description: The "pubek" property will return the TPM's public endorsement
Modulus Length: 256 (bytes)
Modulus: The 256 byte Endorsement Key modulus
-What: /sys/class/misc/tpmX/device/temp_deactivated
+What: /sys/class/tpm/tpmX/device/temp_deactivated
Date: April 2006
KernelVersion: 2.6.17
Contact: tpmdd-devel@lists.sf.net
@@ -167,7 +167,7 @@ Description: The "temp_deactivated" property returns a '1' if the chip has
cycle. Whether a warm boot (reboot) will clear a TPM chip
from a temp_deactivated state is platform specific.
-What: /sys/class/misc/tpmX/device/timeouts
+What: /sys/class/tpm/tpmX/device/timeouts
Date: March 2011
KernelVersion: 3.1
Contact: tpmdd-devel@lists.sf.net
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
new file mode 100644
index 000000000000..2f4a0051b32d
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -0,0 +1,265 @@
+What: /config/usb-gadget/gadget/functions/uvc.name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: UVC function directory
+
+ streaming_maxburst - 0..15 (ss only)
+ streaming_maxpacket - 1..1023 (fs), 1..3072 (hs/ss)
+ streaming_interval - 1..16
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Control descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Super speed control class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Full speed control class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Output terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default output terminal descriptors
+
+ All attributes read only:
+ iTerminal - index of string descriptor
+ bSourceID - id of the terminal to which this terminal
+ is connected
+ bAssocTerminal - id of the input terminal to which this output
+ terminal is associated
+ wTerminalType - terminal type
+ bTerminalID - a non-zero id of this terminal
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Camera terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default camera terminal descriptors
+
+ All attributes read only:
+ bmControls - bitmap specifying which controls are
+ supported for the video stream
+ wOcularFocalLength - the value of Locular
+ wObjectiveFocalLengthMax- the value of Lmin
+ wObjectiveFocalLengthMin- the value of Lmax
+ iTerminal - index of string descriptor
+ bAssocTerminal - id of the output terminal to which
+ this terminal is connected
+ wTerminalType - terminal type
+ bTerminalID - a non-zero id of this terminal
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/processing
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Processing unit descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/processing/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default processing unit descriptors
+
+ All attributes read only:
+ iProcessing - index of string descriptor
+ bmControls - bitmap specifying which controls are
+ supported for the video stream
+ wMaxMultiplier - maximum digital magnification x100
+ bSourceID - id of the terminal to which this unit is
+ connected
+ bUnitID - a non-zero id of this unit
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/header
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Control header descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/header/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific control header descriptors
+
+dwClockFrequency
+bcdUVC
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Super speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: High speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Full speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Color matching descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default color matching descriptors
+
+ All attributes read only:
+ bMatrixCoefficients - matrix used to compute luma and
+ chroma values from the color primaries
+ bTransferCharacteristics- optoelectronic transfer
+ characteristic of the source picutre,
+ also called the gamma function
+ bColorPrimaries - color primaries and the reference
+ white
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
+Date: Dec 2014
+KernelVersion: 3.20
+Description: MJPEG format descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific MJPEG format descriptors
+
+ All attributes read only,
+ except bmaControls and bDefaultFrameIndex:
+ bmaControls - this format's data for bmaControls in
+ the streaming header
+ bmInterfaceFlags - specifies interlace information,
+ read-only
+ bAspectRatioY - the X dimension of the picture aspect
+ ratio, read-only
+ bAspectRatioX - the Y dimension of the picture aspect
+ ratio, read-only
+ bmFlags - characteristics of this format,
+ read-only
+ bDefaultFrameIndex - optimum frame index for this stream
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific MJPEG frame descriptors
+
+ dwFrameInterval - indicates how frame interval can be
+ programmed; a number of values
+ separated by newline can be specified
+ dwDefaultFrameInterval - the frame interval the device would
+ like to use as default
+ dwMaxVideoFrameBufferSize- the maximum number of bytes the
+ compressor will produce for a video
+ frame or still image
+ dwMaxBitRate - the maximum bit rate at the shortest
+ frame interval in bps
+ dwMinBitRate - the minimum bit rate at the longest
+ frame interval in bps
+ wHeight - height of decoded bitmap frame in px
+ wWidth - width of decoded bitmam frame in px
+ bmCapabilities - still image support, fixed frame-rate
+ support
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Uncompressed format descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific uncompressed format descriptors
+
+ bmaControls - this format's data for bmaControls in
+ the streaming header
+ bmInterfaceFlags - specifies interlace information,
+ read-only
+ bAspectRatioY - the X dimension of the picture aspect
+ ratio, read-only
+ bAspectRatioX - the Y dimension of the picture aspect
+ ratio, read-only
+ bDefaultFrameIndex - optimum frame index for this stream
+ bBitsPerPixel - number of bits per pixel used to
+ specify color in the decoded video
+ frame
+ guidFormat - globally unique id used to identify
+ stream-encoding format
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific uncompressed frame descriptors
+
+ dwFrameInterval - indicates how frame interval can be
+ programmed; a number of values
+ separated by newline can be specified
+ dwDefaultFrameInterval - the frame interval the device would
+ like to use as default
+ dwMaxVideoFrameBufferSize- the maximum number of bytes the
+ compressor will produce for a video
+ frame or still image
+ dwMaxBitRate - the maximum bit rate at the shortest
+ frame interval in bps
+ dwMinBitRate - the minimum bit rate at the longest
+ frame interval in bps
+ wHeight - height of decoded bitmap frame in px
+ wWidth - width of decoded bitmam frame in px
+ bmCapabilities - still image support, fixed frame-rate
+ support
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming header descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific streaming header descriptors
+
+ All attributes read only:
+ bTriggerUsage - how the host software will respond to
+ a hardware trigger interrupt event
+ bTriggerSupport - flag specifying if hardware
+ triggering is supported
+ bStillCaptureMethod - method of still image caputre
+ supported
+ bTerminalLink - id of the output terminal to which
+ the video endpoint of this interface
+ is connected
+ bmInfo - capabilities of this video streaming
+ interface
diff --git a/Documentation/ABI/testing/sysfs-bus-amba b/Documentation/ABI/testing/sysfs-bus-amba
new file mode 100644
index 000000000000..e7b54677cfbe
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-amba
@@ -0,0 +1,20 @@
+What: /sys/bus/amba/devices/.../driver_override
+Date: September 2014
+Contact: Antonios Motakis <a.motakis@virtualopensystems.com>
+Description:
+ This file allows the driver for a device to be specified which
+ will override standard OF, ACPI, ID table, and name matching.
+ When specified, only a driver with a name matching the value
+ written to driver_override will have an opportunity to bind to
+ the device. The override is specified by writing a string to the
+ driver_override file (echo vfio-amba > driver_override) and may
+ be cleared with an empty string (echo > driver_override).
+ This returns the device to standard matching rules binding.
+ Writing to driver_override does not automatically unbind the
+ device from its current driver or make any attempt to
+ automatically load the specified driver. If no driver with a
+ matching name is currently loaded in the kernel, the device will
+ not bind to any driver. This also allows devices to opt-out of
+ driver binding using a driver_override name such as "none".
+ Only a single driver may be specified in the override, there is
+ no support for parsing delimiters.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
index 20979f8b3edb..505f080d20a1 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -52,12 +52,18 @@ Description: Per-pmu performance monitoring events specific to the running syste
event=0x2abc
event=0x423,inv,cmask=0x3
domain=0x1,offset=0x8,starting_index=0xffff
+ domain=0x1,offset=0x8,core=?
Each of the assignments indicates a value to be assigned to a
particular set of bits (as defined by the format file
corresponding to the <term>) in the perf_event structure passed
to the perf_open syscall.
+ In the case of the last example, a value replacing "?" would
+ need to be provided by the user selecting the particular event.
+ This is referred to as "event parameterization". Event
+ parameters have the format 'param=?'.
+
What: /sys/bus/event_source/devices/<pmu>/events/<event>.unit
Date: 2014/02/24
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
index 32f3f5f8bba2..f893337570c1 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -21,3 +21,25 @@ Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
Exposes the "version" field of the 24x7 catalog. This is also
extractable from the provided binary "catalog" sysfs entry.
+
+What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name>
+Date: February 2014
+Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+ Provides the description of a particular event as provided by
+ the firmware. If firmware does not provide a description, no
+ file will be created.
+
+ Note that the event-name lacks the domain suffix appended for
+ events in the events/ dir.
+
+What: /sys/bus/event_source/devices/hv_24x7/event_long_descs/<event-name>
+Date: February 2014
+Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:
+ Provides the "long" description of a particular event as
+ provided by the firmware. If firmware does not provide a
+ description, no file will be created.
+
+ Note that the event-name lacks the domain suffix appended for
+ events in the events/ dir.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 117521dbf2b3..9a70c31619ea 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -92,6 +92,18 @@ Description:
is required is a consistent labeling. Units after application
of scale and offset are millivolts.
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
+KernelVersion: 3.17
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no bias removal etc.) current measurement from
+ channel Y. In special cases where the channel does not
+ correspond to externally available input one of the named
+ versions may be used. The number must always be specified and
+ unique to allow association with event codes. Units after
+ application of scale and offset are milliamps.
+
What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
@@ -234,6 +246,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_current_offset
What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
@@ -262,9 +276,14 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_current_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
@@ -276,6 +295,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -323,6 +343,44 @@ Description:
production inaccuracies). If shared across all channels,
<type>_calibscale is used.
+What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender
+What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender
+What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender
+What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Gender of the user (e.g.: male, female) used by some pedometers
+ to compute the stride length, distance, speed and activity
+ type.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available
+What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available
+What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available
+What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available gender values (e.g.: male, female).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight
+What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight
+What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight
+What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ Height of the user (in meters) used by some pedometers
+ to compute the stride length, distance, speed and activity
+ type.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Weight of the user (in kg). It is needed by some pedometers
+ to compute the calories burnt by the user.
+
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
@@ -783,6 +841,14 @@ What: /sys/.../events/in_tempY_roc_falling_period
What: /sys/.../events/in_accel_x&y&z_mag_falling_period
What: /sys/.../events/in_intensity0_thresh_period
What: /sys/.../events/in_proximity0_thresh_period
+What: /sys/.../events/in_activity_still_thresh_rising_period
+What: /sys/.../events/in_activity_still_thresh_falling_period
+What: /sys/.../events/in_activity_walking_thresh_rising_period
+What: /sys/.../events/in_activity_walking_thresh_falling_period
+What: /sys/.../events/in_activity_jogging_thresh_rising_period
+What: /sys/.../events/in_activity_jogging_thresh_falling_period
+What: /sys/.../events/in_activity_running_thresh_rising_period
+What: /sys/.../events/in_activity_running_thresh_falling_period
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -790,6 +856,40 @@ Description:
met before an event is generated. If direction is not
specified then this period applies to both directions.
+What: /sys/.../events/in_activity_still_thresh_rising_en
+What: /sys/.../events/in_activity_still_thresh_falling_en
+What: /sys/.../events/in_activity_walking_thresh_rising_en
+What: /sys/.../events/in_activity_walking_thresh_falling_en
+What: /sys/.../events/in_activity_jogging_thresh_rising_en
+What: /sys/.../events/in_activity_jogging_thresh_falling_en
+What: /sys/.../events/in_activity_running_thresh_rising_en
+What: /sys/.../events/in_activity_running_thresh_falling_en
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ Enables or disables activitity events. Depending on direction
+ an event is generated when sensor ENTERS or LEAVES a given state.
+
+What: /sys/.../events/in_activity_still_thresh_rising_value
+What: /sys/.../events/in_activity_still_thresh_falling_value
+What: /sys/.../events/in_activity_walking_thresh_rising_value
+What: /sys/.../events/in_activity_walking_thresh_falling_value
+What: /sys/.../events/in_activity_jogging_thresh_rising_value
+What: /sys/.../events/in_activity_jogging_thresh_falling_value
+What: /sys/.../events/in_activity_running_thresh_rising_value
+What: /sys/.../events/in_activity_running_thresh_falling_value
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ Confidence value (in units as percentage) to be used
+ for deciding when an event should be generated. E.g for
+ running: If the confidence value reported by the sensor
+ is greater than in_activity_running_thresh_rising_value
+ then the sensor ENTERS running state. Conversely, if the
+ confidence value reported by the sensor is lower than
+ in_activity_running_thresh_falling_value then the sensor
+ is LEAVING running state.
+
What: /sys/.../iio:deviceX/events/in_accel_mag_en
What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
@@ -822,6 +922,25 @@ Description:
number or direction is not specified, applies to all channels of
this type.
+What: /sys/.../events/in_steps_change_en
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Event generated when channel passes a threshold on the absolute
+ change in value. E.g. for steps: a step change event is
+ generated each time the user takes N steps, where N is set using
+ in_steps_change_value.
+
+What: /sys/.../events/in_steps_change_value
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the value of change threshold that the
+ device is comparing against for the events enabled by
+ <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps:
+ if set to 3, a step change event will be generated every 3
+ steps.
+
What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
@@ -956,6 +1075,16 @@ Description:
and the relevant _type attributes to establish the data storage
format.
+What: /sys/.../iio:deviceX/in_activity_still_input
+What: /sys/.../iio:deviceX/in_activity_walking_input
+What: /sys/.../iio:deviceX/in_activity_jogging_input
+What: /sys/.../iio:deviceX/in_activity_running_input
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to read the confidence for an activity
+ expressed in units as percentage.
+
What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
@@ -973,6 +1102,24 @@ Description:
For a list of available output power modes read
in_accel_power_mode_available.
+What: /sys/.../iio:deviceX/in_energy_input
+What: /sys/.../iio:deviceX/in_energy_raw
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to read the energy value reported by the
+ device (e.g.: human activity sensors report energy burnt by the
+ user). Units after application of scale are Joules.
+
+What: /sys/.../iio:deviceX/in_distance_input
+What: /sys/.../iio:deviceX/in_distance_raw
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to read the distance covered by the user
+ since the last reboot while activated. Units after application
+ of scale are meters.
+
What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
@@ -992,7 +1139,9 @@ Description:
reflectivity of infrared or ultrasound emitted.
Often these sensors are unit less and as such conversion
to SI units is not possible. Where it is, the units should
- be meters.
+ be meters. If such a conversion is not possible, the reported
+ values should behave in the same way as a distance, i.e. lower
+ values indicate something is closer to the sensor.
What: /sys/.../iio:deviceX/in_illuminanceY_input
What: /sys/.../iio:deviceX/in_illuminanceY_raw
@@ -1024,6 +1173,12 @@ Description:
This attribute is used to get/set the integration time in
seconds.
+What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Number of seconds in which to compute speed.
+
What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw
KernelVersion: 3.15
Contact: linux-iio@vger.kernel.org
@@ -1051,3 +1206,46 @@ Description:
after application of scale and offset. If no offset or scale is
present, output should be considered as processed with the
unit in milliamps.
+
+What: /sys/.../iio:deviceX/in_energy_en
+What: /sys/.../iio:deviceX/in_distance_en
+What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en
+What: /sys/.../iio:deviceX/in_steps_en
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ Activates a device feature that runs in firmware/hardware.
+ E.g. for steps: the pedometer saves power while not used;
+ when activated, it will count the steps taken by the user in
+ firmware and export them through in_steps_input.
+
+What: /sys/.../iio:deviceX/in_steps_input
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to read the number of steps taken by the user
+ since the last reboot while activated.
+
+What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input
+What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw
+KernelVersion: 3.19
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to read the current speed value of the
+ user (which is the norm or magnitude of the velocity vector).
+ Units after application of scale are m/s.
+
+What: /sys/.../iio:deviceX/in_steps_debounce_count
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the number of steps that must occur within
+ in_steps_filter_debounce_time for the pedometer to decide the
+ consumer is making steps.
+
+What: /sys/.../iio:deviceX/in_steps_debounce_time
+KernelVersion: 3.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies number of seconds in which we compute the steps
+ that occur in order to decide if the consumer is making steps.
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 554405ec1955..3680364b4048 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -1,3 +1,9 @@
+Note: Attributes that are shared between devices are stored in the directory
+pointed to by the symlink device/.
+Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is
+/sys/class/cxl/afu0.0s/device/irqs_max, i.e. /sys/class/cxl/afu0.0/irqs_max.
+
+
Slave contexts (eg. /sys/class/cxl/afu0.0s):
What: /sys/class/cxl/<afu>/irqs_max
@@ -67,7 +73,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the current version of the kernel/user API.
-What: /sys/class/cxl/<afu>/api_version_com
+What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -75,6 +81,42 @@ Description: read only
this this kernel supports.
+AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
+
+An AFU may optionally export one or more PCIe like configuration records, known
+as AFU configuration records, which will show up here (if present).
+
+What: /sys/class/cxl/<afu>/cr<config num>/vendor
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the vendor ID found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/device
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the device ID found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/vendor
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the class code found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/config
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ This binary file provides raw access to the AFU configuration
+ record. The format is expected to match the either the standard
+ or extended configuration space defined by the PCIe
+ specification.
+
+
Master contexts (eg. /sys/class/cxl/afu0.0m)
@@ -106,7 +148,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Identifies the CAIA Version the card implements.
-What: /sys/class/cxl/<card>/psl_version
+What: /sys/class/cxl/<card>/psl_revision
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -127,3 +169,24 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Will return "user" or "factory" depending on the image loaded
onto the card.
+
+What: /sys/class/cxl/<card>/load_image_on_perst
+Date: December 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Valid entries are "none", "user", and "factory".
+ "none" means PERST will not cause image to be loaded to the
+ card. A power cycle is required to load the image.
+ "none" could be useful for debugging because the trace arrays
+ are preserved.
+ "user" and "factory" means PERST will cause either the user or
+ user or factory image to be loaded.
+ Default is to reload on PERST whichever image the card has
+ loaded.
+
+What: /sys/class/cxl/<card>/reset
+Date: October 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: write only
+ Writing 1 will issue a PERST to card which may cause the card
+ to reload the FPGA depending on load_image_on_perst.
diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei
index 0ec8b8178c41..80d9888a8ece 100644
--- a/Documentation/ABI/testing/sysfs-class-mei
+++ b/Documentation/ABI/testing/sysfs-class-mei
@@ -14,3 +14,18 @@ Description:
The /sys/class/mei/meiN directory is created for
each probed mei device
+What: /sys/class/mei/meiN/fw_status
+Date: Nov 2014
+KernelVersion: 3.19
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Display fw status registers content
+
+ The ME FW writes its status information into fw status
+ registers for BIOS and OS to monitor fw health.
+
+ The register contains running state, power management
+ state, error codes, and others. The way the registers
+ are decoded depends on PCH or SoC generation.
+ Also number of registers varies between 1 and 6
+ depending on generation.
+
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 909e7602c717..369d2a2d7d3e 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -32,3 +32,45 @@ Description:
Valid values:
- 5, 6 or 7 (hours),
- 0: disabled.
+
+What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
+Date: January 2015
+KernelVersion: 3.19.0
+Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+ This entry shows and sets the maximum time the max77693
+ charger operates in fast-charge mode. When the timer expires
+ the device will terminate fast-charge mode (charging current
+ will drop to 0 A) and will trigger interrupt.
+
+ Valid values:
+ - 4 - 16 (hours), step by 2 (rounded down)
+ - 0: disabled.
+
+What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
+Date: January 2015
+KernelVersion: 3.19.0
+Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+ This entry shows and sets the charging current threshold for
+ entering top-off charging mode. When charging current in fast
+ charge mode drops below this value, the charger will trigger
+ interrupt and start top-off charging mode.
+
+ Valid values:
+ - 100000 - 200000 (microamps), step by 25000 (rounded down)
+ - 200000 - 350000 (microamps), step by 50000 (rounded down)
+ - 0: disabled.
+
+What: /sys/class/power_supply/max77693-charger/device/top_off_timer
+Date: January 2015
+KernelVersion: 3.19.0
+Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+ This entry shows and sets the maximum time the max77693
+ charger operates in top-off charge mode. When the timer expires
+ the device will terminate top-off charge mode (charging current
+ will drop to 0 A) and will trigger interrupt.
+
+ Valid values:
+ - 0 - 70 (minutes), step by 10 (rounded down)
diff --git a/Documentation/ABI/testing/sysfs-driver-input-axp-pek b/Documentation/ABI/testing/sysfs-driver-input-axp-pek
new file mode 100644
index 000000000000..a5e671b9fa79
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-input-axp-pek
@@ -0,0 +1,11 @@
+What: /sys/class/input/input(x)/device/startup
+Date: March 2014
+Contact: Carlo Caione <carlo@caione.org>
+Description: Startup time in us. Board is powered on if the button is pressed
+ for more than <startup_time>
+
+What: /sys/class/input/input(x)/device/shutdown
+Date: March 2014
+Contact: Carlo Caione <carlo@caione.org>
+Description: Shutdown time in us. Board is powered off if the button is pressed
+ for more than <shutdown_time>
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 6f9157f16725..2c4cc42006e8 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -74,3 +74,9 @@ Date: March 2014
Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com>
Description:
Controls the memory footprint used by f2fs.
+
+What: /sys/fs/f2fs/<disk>/trim_sections
+Date: February 2015
+Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+ Controls the trimming rate in batch mode.
diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch
new file mode 100644
index 000000000000..5bf42a840b22
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-livepatch
@@ -0,0 +1,44 @@
+What: /sys/kernel/livepatch
+Date: Nov 2014
+KernelVersion: 3.19.0
+Contact: live-patching@vger.kernel.org
+Description:
+ Interface for kernel live patching
+
+ The /sys/kernel/livepatch directory contains subdirectories for
+ each loaded live patch module.
+
+What: /sys/kernel/livepatch/<patch>
+Date: Nov 2014
+KernelVersion: 3.19.0
+Contact: live-patching@vger.kernel.org
+Description:
+ The patch directory contains subdirectories for each kernel
+ object (vmlinux or a module) in which it patched functions.
+
+What: /sys/kernel/livepatch/<patch>/enabled
+Date: Nov 2014
+KernelVersion: 3.19.0
+Contact: live-patching@vger.kernel.org
+Description:
+ A writable attribute that indicates whether the patched
+ code is currently applied. Writing 0 will disable the patch
+ while writing 1 will re-enable the patch.
+
+What: /sys/kernel/livepatch/<patch>/<object>
+Date: Nov 2014
+KernelVersion: 3.19.0
+Contact: live-patching@vger.kernel.org
+Description:
+ The object directory contains subdirectories for each function
+ that is patched within the object.
+
+What: /sys/kernel/livepatch/<patch>/<object>/<function>
+Date: Nov 2014
+KernelVersion: 3.19.0
+Contact: live-patching@vger.kernel.org
+Description:
+ The function directory contains attributes regarding the
+ properties and state of the patched function.
+
+ There are currently no such attributes.
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
deleted file mode 100644
index 7969443ef0ef..000000000000
--- a/Documentation/ABI/testing/sysfs-platform-dell-laptop
+++ /dev/null
@@ -1,60 +0,0 @@
-What: /sys/class/leds/dell::kbd_backlight/als_setting
-Date: December 2014
-KernelVersion: 3.19
-Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
- Pali Rohár <pali.rohar@gmail.com>
-Description:
- This file allows to control the automatic keyboard
- illumination mode on some systems that have an ambient
- light sensor. Write 1 to this file to enable the auto
- mode, 0 to disable it.
-
-What: /sys/class/leds/dell::kbd_backlight/start_triggers
-Date: December 2014
-KernelVersion: 3.19
-Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
- Pali Rohár <pali.rohar@gmail.com>
-Description:
- This file allows to control the input triggers that
- turn on the keyboard backlight illumination that is
- disabled because of inactivity.
- Read the file to see the triggers available. The ones
- enabled are preceded by '+', those disabled by '-'.
-
- To enable a trigger, write its name preceded by '+' to
- this file. To disable a trigger, write its name preceded
- by '-' instead.
-
- For example, to enable the keyboard as trigger run:
- echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
- To disable it:
- echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-
- Note that not all the available triggers can be configured.
-
-What: /sys/class/leds/dell::kbd_backlight/stop_timeout
-Date: December 2014
-KernelVersion: 3.19
-Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
- Pali Rohár <pali.rohar@gmail.com>
-Description:
- This file allows to specify the interval after which the
- keyboard illumination is disabled because of inactivity.
- The timeouts are expressed in seconds, minutes, hours and
- days, for which the symbols are 's', 'm', 'h' and 'd'
- respectively.
-
- To configure the timeout, write to this file a value along
- with any the above units. If no unit is specified, the value
- is assumed to be expressed in seconds.
-
- For example, to set the timeout to 10 minutes run:
- echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
-
- Note that when this file is read, the returned value might be
- expressed in a different unit than the one used when the timeout
- was set.
-
- Also note that only some timeouts are supported and that
- some systems might fall back to a specific timeout in case
- an invalid timeout is written to this file.
diff --git a/Documentation/Changes b/Documentation/Changes
index 74bdda9272a4..646cdaa6e9d1 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -21,8 +21,8 @@ running a Linux kernel. Also, not all tools are necessary on all
systems; obviously, if you don't have any ISDN hardware, for example,
you probably needn't concern yourself with isdn4k-utils.
-o Gnu C 3.2 # gcc --version
-o Gnu make 3.80 # make --version
+o GNU C 3.2 # gcc --version
+o GNU make 3.80 # make --version
o binutils 2.12 # ld -v
o util-linux 2.10o # fdformat --version
o module-init-tools 0.9.10 # depmod -V
@@ -57,7 +57,7 @@ computer.
Make
----
-You will need Gnu make 3.80 or later to build the kernel.
+You will need GNU make 3.80 or later to build the kernel.
Binutils
--------
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 618a33c940df..449a8a19fc21 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -527,6 +527,7 @@ values. To do the latter, you can stick the following in your .emacs file:
(string-match (expand-file-name "~/src/linux-trees")
filename))
(setq indent-tabs-mode t)
+ (setq show-trailing-whitespace t)
(c-set-style "linux-tabs-only")))))
This will make emacs go better with the kernel coding style for C
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index d9b9416c989f..aac9357d4866 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -113,7 +113,6 @@
!Finclude/net/cfg80211.h cfg80211_beacon_data
!Finclude/net/cfg80211.h cfg80211_ap_settings
!Finclude/net/cfg80211.h station_parameters
-!Finclude/net/cfg80211.h station_info_flags
!Finclude/net/cfg80211.h rate_info_flags
!Finclude/net/cfg80211.h rate_info
!Finclude/net/cfg80211.h station_info
@@ -435,7 +434,6 @@
<section id="ps-client">
<title>support for powersaving clients</title>
!Pinclude/net/mac80211.h AP support for powersaving clients
- </section>
!Finclude/net/mac80211.h ieee80211_get_buffered_bc
!Finclude/net/mac80211.h ieee80211_beacon_get
!Finclude/net/mac80211.h ieee80211_sta_eosp
@@ -444,6 +442,7 @@
!Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni
!Finclude/net/mac80211.h ieee80211_sta_set_buffered
!Finclude/net/mac80211.h ieee80211_sta_block_awake
+ </section>
</chapter>
<chapter id="multi-iface">
@@ -488,8 +487,8 @@
<title>RX A-MPDU aggregation</title>
!Pnet/mac80211/agg-rx.c RX A-MPDU aggregation
!Cnet/mac80211/agg-rx.c
- </sect1>
!Finclude/net/mac80211.h ieee80211_ampdu_mlme_action
+ </sect1>
</chapter>
<chapter id="smps">
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 9c7d92d03f62..b6a6a2e0dd3b 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -56,7 +56,7 @@ htmldocs: $(HTML)
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
- $(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9)
+ find $(obj)/man -name '*.9' | xargs gzip -f
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index c763d30f4893..04a8c24ead47 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -111,7 +111,7 @@
<para>
This specification is intended for consumers of the kernel crypto
API as well as for developers implementing ciphers. This API
- specification, however, does not discusses all API calls available
+ specification, however, does not discuss all API calls available
to data transformation implementations (i.e. implementations of
ciphers and other transformations (such as CRC or even compression
algorithms) that can register with the kernel crypto API).
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 4b592ffbafee..03f1985a4bd1 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -239,6 +239,14 @@
Driver supports dedicated render nodes.
</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term>DRIVER_ATOMIC</term>
+ <listitem><para>
+ Driver supports atomic properties. In this case the driver
+ must implement appropriate obj->atomic_get_property() vfuncs
+ for any modeset objects with driver specific properties.
+ </para></listitem>
+ </varlistentry>
</variablelist>
</sect3>
<sect3>
@@ -1377,7 +1385,7 @@ int max_width, max_height;</synopsis>
<itemizedlist>
<listitem>
DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC. Primary
- planes are the planes operated upon by by CRTC modesetting and flipping
+ planes are the planes operated upon by CRTC modesetting and flipping
operations described in <xref linkend="drm-kms-crtcops"/>.
</listitem>
<listitem>
@@ -2362,6 +2370,7 @@ void intel_crt_init(struct drm_device *dev)
</sect2>
<sect2>
<title>Modeset Helper Functions Reference</title>
+!Iinclude/drm/drm_crtc_helper.h
!Edrivers/gpu/drm/drm_crtc_helper.c
!Pdrivers/gpu/drm/drm_crtc_helper.c overview
</sect2>
@@ -2564,8 +2573,8 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >Description/Restrictions</td>
</tr>
<tr>
- <td rowspan="25" valign="top" >DRM</td>
- <td rowspan="4" valign="top" >Generic</td>
+ <td rowspan="36" valign="top" >DRM</td>
+ <td rowspan="5" valign="top" >Connector</td>
<td valign="top" >“EDID”</td>
<td valign="top" >BLOB | IMMUTABLE</td>
<td valign="top" >0</td>
@@ -2594,7 +2603,14 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >Contains tiling information for a connector.</td>
</tr>
<tr>
- <td rowspan="1" valign="top" >Plane</td>
+ <td valign="top" >“CRTC_ID”</td>
+ <td valign="top" >OBJECT</td>
+ <td valign="top" >DRM_MODE_OBJECT_CRTC</td>
+ <td valign="top" >Connector</td>
+ <td valign="top" >CRTC that connector is attached to (atomic)</td>
+ </tr>
+ <tr>
+ <td rowspan="11" valign="top" >Plane</td>
<td valign="top" >“type”</td>
<td valign="top" >ENUM | IMMUTABLE</td>
<td valign="top" >{ "Overlay", "Primary", "Cursor" }</td>
@@ -2602,6 +2618,76 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >Plane type</td>
</tr>
<tr>
+ <td valign="top" >“SRC_X”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout source x coordinate in 16.16 fixed point (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“SRC_Y”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout source y coordinate in 16.16 fixed point (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“SRC_W”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout source width in 16.16 fixed point (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“SRC_H”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout source height in 16.16 fixed point (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“CRTC_X”</td>
+ <td valign="top" >SIGNED_RANGE</td>
+ <td valign="top" >Min=INT_MIN, Max=INT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout CRTC (destination) x coordinate (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“CRTC_Y”</td>
+ <td valign="top" >SIGNED_RANGE</td>
+ <td valign="top" >Min=INT_MIN, Max=INT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout CRTC (destination) y coordinate (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“CRTC_W”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout CRTC (destination) width (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“CRTC_H”</td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=UINT_MAX</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout CRTC (destination) height (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“FB_ID”</td>
+ <td valign="top" >OBJECT</td>
+ <td valign="top" >DRM_MODE_OBJECT_FB</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Scanout framebuffer (atomic)</td>
+ </tr>
+ <tr>
+ <td valign="top" >“CRTC_ID”</td>
+ <td valign="top" >OBJECT</td>
+ <td valign="top" >DRM_MODE_OBJECT_CRTC</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >CRTC that plane is attached to (atomic)</td>
+ </tr>
+ <tr>
<td rowspan="2" valign="top" >DVI-I</td>
<td valign="top" >“subconnector”</td>
<td valign="top" >ENUM</td>
@@ -3883,6 +3969,7 @@ int num_ioctls;</synopsis>
<title>Runtime Power Management</title>
!Pdrivers/gpu/drm/i915/intel_runtime_pm.c runtime pm
!Idrivers/gpu/drm/i915/intel_runtime_pm.c
+!Idrivers/gpu/drm/i915/intel_uncore.c
</sect2>
<sect2>
<title>Interrupt Handling</title>
@@ -3932,6 +4019,11 @@ int num_ioctls;</synopsis>
</para>
</sect2>
<sect2>
+ <title>Atomic Plane Helpers</title>
+!Pdrivers/gpu/drm/i915/intel_atomic_plane.c atomic plane helpers
+!Idrivers/gpu/drm/i915/intel_atomic_plane.c
+ </sect2>
+ <sect2>
<title>Output Probing</title>
<para>
This section covers output probing and related infrastructure like the
@@ -3951,6 +4043,11 @@ int num_ioctls;</synopsis>
!Idrivers/gpu/drm/i915/intel_psr.c
</sect2>
<sect2>
+ <title>Frame Buffer Compression (FBC)</title>
+!Pdrivers/gpu/drm/i915/intel_fbc.c Frame Buffer Compression (FBC)
+!Idrivers/gpu/drm/i915/intel_fbc.c
+ </sect2>
+ <sect2>
<title>DPIO</title>
!Pdrivers/gpu/drm/i915/i915_reg.h DPIO
<table id="dpiox2">
@@ -4054,10 +4151,31 @@ int num_ioctls;</synopsis>
!Idrivers/gpu/drm/i915/i915_cmd_parser.c
</sect2>
<sect2>
+ <title>Batchbuffer Pools</title>
+!Pdrivers/gpu/drm/i915/i915_gem_batch_pool.c batch pool
+!Idrivers/gpu/drm/i915/i915_gem_batch_pool.c
+ </sect2>
+ <sect2>
<title>Logical Rings, Logical Ring Contexts and Execlists</title>
!Pdrivers/gpu/drm/i915/intel_lrc.c Logical Rings, Logical Ring Contexts and Execlists
!Idrivers/gpu/drm/i915/intel_lrc.c
</sect2>
+ <sect2>
+ <title>Global GTT views</title>
+!Pdrivers/gpu/drm/i915/i915_gem_gtt.c Global GTT views
+!Idrivers/gpu/drm/i915/i915_gem_gtt.c
+ </sect2>
+ <sect2>
+ <title>Buffer Object Eviction</title>
+ <para>
+ This section documents the interface function for evicting buffer
+ objects to make space available in the virtual gpu address spaces.
+ Note that this is mostly orthogonal to shrinking buffer objects
+ caches, which has the goal to make main memory (shared with the gpu
+ through the unified memory architecture) available.
+ </para>
+!Idrivers/gpu/drm/i915/i915_gem_evict.c
+ </sect2>
</sect1>
<sect1>
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index f77358f96930..2428cc04dbc8 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -75,7 +75,7 @@
a development machine and the other is the target machine. The
kernel to be debugged runs on the target machine. The development
machine runs an instance of gdb against the vmlinux file which
- contains the symbols (not boot image such as bzImage, zImage,
+ contains the symbols (not a boot image such as bzImage, zImage,
uImage...). In gdb the developer specifies the connection
parameters and connects to kgdb. The type of connection a
developer makes with gdb depends on the availability of kgdb I/O
@@ -95,7 +95,7 @@
<title>Kernel config options for kgdb</title>
<para>
To enable <symbol>CONFIG_KGDB</symbol> you should look under
- "Kernel debugging" and select "KGDB: kernel debugger".
+ "Kernel hacking" / "Kernel debugging" and select "KGDB: kernel debugger".
</para>
<para>
While it is not a hard requirement that you have symbols in your
@@ -105,7 +105,7 @@
kernel with debug info" in the config menu.
</para>
<para>
- It is advised, but not required that you turn on the
+ It is advised, but not required, that you turn on the
<symbol>CONFIG_FRAME_POINTER</symbol> kernel option which is called "Compile the
kernel with frame pointers" in the config menu. This option
inserts code to into the compiled executable which saves the frame
@@ -181,7 +181,7 @@
<para>This section describes the various runtime kernel
parameters that affect the configuration of the kernel debugger.
The following chapter covers using kdb and kgdb as well as
- provides some examples of the configuration parameters.</para>
+ providing some examples of the configuration parameters.</para>
<sect1 id="kgdboc">
<title>Kernel parameter: kgdboc</title>
<para>The kgdboc driver was originally an abbreviation meant to
@@ -219,8 +219,8 @@
<listitem><para>kbd = Keyboard</para></listitem>
</itemizedlist>
</para>
- <para>You can configure kgdboc to use the keyboard, and or a serial
- device depending on if you are using kdb and or kgdb, in one of the
+ <para>You can configure kgdboc to use the keyboard, and/or a serial
+ device depending on if you are using kdb and/or kgdb, in one of the
following scenarios. The order listed above must be observed if
you use any of the optional configurations together. Using kms +
only gdb is generally not a useful combination.</para>
@@ -261,11 +261,8 @@
</sect3>
<sect3 id="kgdbocArgs3">
<title>More examples</title>
- <para>You can configure kgdboc to use the keyboard, and or a serial
- device depending on if you are using kdb and or kgdb, in one of the
- following scenarios.</para>
- <para>You can configure kgdboc to use the keyboard, and or a serial device
- depending on if you are using kdb and or kgdb, in one of the
+ <para>You can configure kgdboc to use the keyboard, and/or a serial device
+ depending on if you are using kdb and/or kgdb, in one of the
following scenarios.
<orderedlist>
<listitem><para>kdb and kgdb over only a serial port</para>
@@ -315,7 +312,7 @@
<para>
The Kernel command line option <constant>kgdbwait</constant> makes
kgdb wait for a debugger connection during booting of a kernel. You
- can only use this option you compiled a kgdb I/O driver into the
+ can only use this option if you compiled a kgdb I/O driver into the
kernel and you specified the I/O driver configuration as a kernel
command line option. The kgdbwait parameter should always follow the
configuration parameter for the kgdb I/O driver in the kernel
@@ -354,7 +351,7 @@
</listitem>
</orderedlist>
<para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
- active system console. An example incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
+ active system console. An example of incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
</para>
<para>It is possible to use this option with kgdboc on a tty that is not a system console.
</para>
@@ -386,12 +383,12 @@
<title>Quick start for kdb on a serial port</title>
<para>This is a quick example of how to use kdb.</para>
<para><orderedlist>
- <listitem><para>Boot kernel with arguments:
+ <listitem><para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>console=ttyS0,115200 kgdboc=ttyS0,115200</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
- <para>Configure kgdboc after the kernel booted; assuming you are using a serial port console:
+ <para>Configure kgdboc after the kernel has booted; assuming you are using a serial port console:
<itemizedlist>
<listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist>
@@ -442,12 +439,12 @@
<title>Quick start for kdb using a keyboard connected console</title>
<para>This is a quick example of how to use kdb with a keyboard.</para>
<para><orderedlist>
- <listitem><para>Boot kernel with arguments:
+ <listitem><para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>kgdboc=kbd</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
- <para>Configure kgdboc after the kernel booted:
+ <para>Configure kgdboc after the kernel has booted:
<itemizedlist>
<listitem><para><constant>echo kbd &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist>
@@ -501,12 +498,12 @@
<title>Connecting with gdb to a serial port</title>
<orderedlist>
<listitem><para>Configure kgdboc</para>
- <para>Boot kernel with arguments:
+ <para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
- <para>Configure kgdboc after the kernel booted:
+ <para>Configure kgdboc after the kernel has booted:
<itemizedlist>
<listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist></para>
@@ -536,7 +533,7 @@
</para>
</listitem>
<listitem>
- <para>Connect from from gdb</para>
+ <para>Connect from gdb</para>
<para>
Example (using a directly connected port):
</para>
@@ -584,7 +581,7 @@
<para>
There are two ways to switch from kgdb to kdb: you can use gdb to
issue a maintenance packet, or you can blindly type the command $3#33.
- Whenever kernel debugger stops in kgdb mode it will print the
+ Whenever the kernel debugger stops in kgdb mode it will print the
message <constant>KGDB or $3#33 for KDB</constant>. It is important
to note that you have to type the sequence correctly in one pass.
You cannot type a backspace or delete because kgdb will interpret
@@ -704,7 +701,7 @@ Task Addr Pid Parent [*] cpu State Thread Command
<listitem><para>Registration and unregistration of architecture specific trap hooks</para></listitem>
<listitem><para>Any special exception handling and cleanup</para></listitem>
<listitem><para>NMI exception handling and cleanup</para></listitem>
- <listitem><para>(optional)HW breakpoints</para></listitem>
+ <listitem><para>(optional) HW breakpoints</para></listitem>
</itemizedlist>
</para>
</listitem>
@@ -760,7 +757,7 @@ Task Addr Pid Parent [*] cpu State Thread Command
a kgdb I/O driver for characters when it needs input. The I/O
driver is expected to return immediately if there is no data
available. Doing so allows for the future possibility to touch
- watch dog hardware in such a way as to have a target system not
+ watchdog hardware in such a way as to have a target system not
reset when these are enabled.
</para>
</listitem>
@@ -779,21 +776,25 @@ Task Addr Pid Parent [*] cpu State Thread Command
their &lt;asm/kgdb.h&gt; file. These are:
<itemizedlist>
<listitem>
- <para>
- NUMREGBYTES: The size in bytes of all of the registers, so
- that we can ensure they will all fit into a packet.
- </para>
- <para>
- BUFMAX: The size in bytes of the buffer GDB will read into.
- This must be larger than NUMREGBYTES.
- </para>
- <para>
- CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
- flush_cache_range or flush_icache_range. On some architectures,
- these functions may not be safe to call on SMP since we keep other
- CPUs in a holding pattern.
- </para>
- </listitem>
+ <para>
+ NUMREGBYTES: The size in bytes of all of the registers, so
+ that we can ensure they will all fit into a packet.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ BUFMAX: The size in bytes of the buffer GDB will read into.
+ This must be larger than NUMREGBYTES.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
+ flush_cache_range or flush_icache_range. On some architectures,
+ these functions may not be safe to call on SMP since we keep other
+ CPUs in a holding pattern.
+ </para>
+ </listitem>
</itemizedlist>
</para>
<para>
@@ -812,8 +813,8 @@ Task Addr Pid Parent [*] cpu State Thread Command
<para>
The kgdboc driver is actually a very thin driver that relies on the
underlying low level to the hardware driver having "polling hooks"
- which the to which the tty driver is attached. In the initial
- implementation of kgdboc it the serial_core was changed to expose a
+ to which the tty driver is attached. In the initial
+ implementation of kgdboc the serial_core was changed to expose a
low level UART hook for doing polled mode reading and writing of a
single character while in an atomic context. When kgdb makes an I/O
request to the debugger, kgdboc invokes a callback in the serial
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index e013e4bf244c..4e9462f1ab4c 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2692,12 +2692,11 @@ in the S5P family of SoCs by Samsung.
<row><entry></entry></row>
<row>
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE</constant>&nbsp;</entry>
- <entry>integer</entry>
- </row><row><entry spanname="descr">If the display delay is enabled then the decoder has to return a
-CAPTURE buffer after processing a certain number of OUTPUT buffers. If this number is low, then it may result in
-buffers not being dequeued in display order. In addition hardware may still use those buffers as reference, thus
-application should not write to those buffers. This feature can be used for example for generating thumbnails of videos.
-Applicable to the H264 decoder.
+ <entry>boolean</entry>
+ </row><row><entry spanname="descr">If the display delay is enabled then the decoder is forced to return a
+CAPTURE buffer (decoded frame) after processing a certain number of OUTPUT buffers. The delay can be set through
+<constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant>. This feature can be used for example
+for generating thumbnails of videos. Applicable to the H264 decoder.
</entry>
</row>
<row><entry></entry></row>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index c1c62a9acc2a..f34d03ebda3a 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
@@ -17,7 +17,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats with
+ <para>These four pixel formats are raw sRGB / Bayer formats with
10 bits per colour. Each colour component is stored in a 16-bit word, with 6
unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
index 29acc2098cc2..d2e5845e57fb 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
@@ -25,7 +25,7 @@
</refnamediv>
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer
+ <para>These four pixel formats are raw sRGB / Bayer
formats with 10 bits per color compressed to 8 bits each,
using the A-LAW algorithm. Each color component consumes 8
bits of memory. In other respects this format is similar to
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
index 2d3f0b1aefe0..bde89878c5c5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -18,7 +18,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats
+ <para>These four pixel formats are raw sRGB / Bayer formats
with 10 bits per colour compressed to 8 bits each, using DPCM
compression. DPCM, differential pulse-code modulation, is lossy.
Each colour component consumes 8 bits of memory. In other respects
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
new file mode 100644
index 000000000000..30aa63581fe3
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
@@ -0,0 +1,99 @@
+ <refentry id="pixfmt-srggb10p">
+ <refmeta>
+ <refentrytitle>V4L2_PIX_FMT_SRGGB10P ('pRAA'),
+ V4L2_PIX_FMT_SGRBG10P ('pgAA'),
+ V4L2_PIX_FMT_SGBRG10P ('pGAA'),
+ V4L2_PIX_FMT_SBGGR10P ('pBAA'),
+ </refentrytitle>
+ &manvol;
+ </refmeta>
+ <refnamediv>
+ <refname id="V4L2-PIX-FMT-SRGGB10P"><constant>V4L2_PIX_FMT_SRGGB10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SGRBG10P"><constant>V4L2_PIX_FMT_SGRBG10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SGBRG10P"><constant>V4L2_PIX_FMT_SGBRG10P</constant></refname>
+ <refname id="V4L2-PIX-FMT-SBGGR10P"><constant>V4L2_PIX_FMT_SBGGR10P</constant></refname>
+ <refpurpose>10-bit packed Bayer formats</refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>Description</title>
+
+ <para>These four pixel formats are packed raw sRGB /
+ Bayer formats with 10 bits per colour. Every four consecutive
+ colour components are packed into 5 bytes. Each of the first 4
+ bytes contain the 8 high order bits of the pixels, and the
+ fifth byte contains the two least significants bits of each
+ pixel, in the same order.</para>
+
+ <para>Each n-pixel row contains n/2 green samples and n/2 blue
+ or red samples, with alternating green-red and green-blue
+ rows. They are conventionally described as GRGR... BGBG...,
+ RGRG... GBGB..., etc. Below is an example of one of these
+ formats:</para>
+
+ <example>
+ <title><constant>V4L2_PIX_FMT_SBGGR10P</constant> 4 &times; 4
+ pixel image</title>
+
+ <formalpara>
+ <title>Byte Order.</title>
+ <para>Each cell is one byte.
+ <informaltable frame="topbot" colsep="1" rowsep="1">
+ <tgroup cols="5" align="center" border="1">
+ <colspec align="left" colwidth="2*" />
+ <tbody valign="top">
+ <row>
+ <entry>start&nbsp;+&nbsp;0:</entry>
+ <entry>B<subscript>00high</subscript></entry>
+ <entry>G<subscript>01high</subscript></entry>
+ <entry>B<subscript>02high</subscript></entry>
+ <entry>G<subscript>03high</subscript></entry>
+ <entry>B<subscript>00low</subscript>(bits 7--6)
+ G<subscript>01low</subscript>(bits 5--4)
+ B<subscript>02low</subscript>(bits 3--2)
+ G<subscript>03low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;5:</entry>
+ <entry>G<subscript>10high</subscript></entry>
+ <entry>R<subscript>11high</subscript></entry>
+ <entry>G<subscript>12high</subscript></entry>
+ <entry>R<subscript>13high</subscript></entry>
+ <entry>G<subscript>10low</subscript>(bits 7--6)
+ R<subscript>11low</subscript>(bits 5--4)
+ G<subscript>12low</subscript>(bits 3--2)
+ R<subscript>13low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;10:</entry>
+ <entry>B<subscript>20high</subscript></entry>
+ <entry>G<subscript>21high</subscript></entry>
+ <entry>B<subscript>22high</subscript></entry>
+ <entry>G<subscript>23high</subscript></entry>
+ <entry>B<subscript>20low</subscript>(bits 7--6)
+ G<subscript>21low</subscript>(bits 5--4)
+ B<subscript>22low</subscript>(bits 3--2)
+ G<subscript>23low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;15:</entry>
+ <entry>G<subscript>30high</subscript></entry>
+ <entry>R<subscript>31high</subscript></entry>
+ <entry>G<subscript>32high</subscript></entry>
+ <entry>R<subscript>33high</subscript></entry>
+ <entry>G<subscript>30low</subscript>(bits 7--6)
+ R<subscript>31low</subscript>(bits 5--4)
+ G<subscript>32low</subscript>(bits 3--2)
+ R<subscript>33low</subscript>(bits 1--0)
+ </entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </informaltable>
+ </para>
+ </formalpara>
+ </example>
+ </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
index 96947f17fca1..0c8e4adf417f 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
@@ -17,7 +17,7 @@
<refsect1>
<title>Description</title>
- <para>The following four pixel formats are raw sRGB / Bayer formats with
+ <para>These four pixel formats are raw sRGB / Bayer formats with
12 bits per colour. Each colour component is stored in a 16-bit word, with 4
unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index d5eca4b8f74b..5e0352c50324 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -1405,6 +1405,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
&sub-srggb8;
&sub-sbggr16;
&sub-srggb10;
+ &sub-srggb10p;
&sub-srggb10alaw8;
&sub-srggb10dpcm8;
&sub-srggb12;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
index 28a8c1e1c705..a2017bfcaed2 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
@@ -212,11 +212,3 @@ standards set in the <structfield>standards</structfield> field.
&return-value;
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
index b9fdfeacdbcb..6e3cadd4e1f9 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
@@ -131,11 +131,3 @@ is out of bounds or the <structfield>pad</structfield> number is invalid.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 1fdc246e4256..cd0e452dfed5 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -719,7 +719,7 @@ framework to set up sysfs files for this region. Simply leave it alone.
</para>
</sect1>
-<sect1 id="using uio_dmem_genirq">
+<sect1 id="using-uio_dmem_genirq">
<title>Using uio_dmem_genirq for platform devices</title>
<para>
In addition to statically allocated memory ranges, they may also be
@@ -746,16 +746,16 @@ framework to set up sysfs files for this region. Simply leave it alone.
following elements:
</para>
<itemizedlist>
- <listitem><varname>struct uio_info uioinfo</varname>: The same
+ <listitem><para><varname>struct uio_info uioinfo</varname>: The same
structure used as the <varname>uio_pdrv_genirq</varname> platform
- data</listitem>
- <listitem><varname>unsigned int *dynamic_region_sizes</varname>:
+ data</para></listitem>
+ <listitem><para><varname>unsigned int *dynamic_region_sizes</varname>:
Pointer to list of sizes of dynamic memory regions to be mapped into
user space.
- </listitem>
- <listitem><varname>unsigned int num_dynamic_regions</varname>:
+ </para></listitem>
+ <listitem><para><varname>unsigned int num_dynamic_regions</varname>:
Number of elements in <varname>dynamic_region_sizes</varname> array.
- </listitem>
+ </para></listitem>
</itemizedlist>
<para>
The dynamic regions defined in the platform data will be appended to
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index ed186a902d31..b57c0c1cdac6 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -15,7 +15,7 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
21 seconds.
This configuration parameter may be changed at runtime via the
- /sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however
+ /sys/module/rcupdate/parameters/rcu_cpu_stall_timeout, however
this parameter is checked only at the beginning of a cycle.
So if you are 10 seconds into a 40-second stall, setting this
sysfs parameter to (say) five will shorten the timeout for the
@@ -152,6 +152,15 @@ no non-lazy callbacks ("." is printed otherwise, as shown above) and
"D" indicates that dyntick-idle processing is enabled ("." is printed
otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
+If the relevant grace-period kthread has been unable to run prior to
+the stall warning, the following additional line is printed:
+
+ rcu_preempt kthread starved for 2023 jiffies!
+
+Starving the grace-period kthreads of CPU time can of course result in
+RCU CPU stall warnings even when all CPUs and tasks have passed through
+the required quiescent states.
+
Multiple Warnings From One Stall
@@ -187,6 +196,11 @@ o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the
behavior, you might need to replace some of the cond_resched()
calls with calls to cond_resched_rcu_qs().
+o Anything that prevents RCU's grace-period kthreads from running.
+ This can result in the "All QSes seen" console-log message.
+ This message will include information on when the kthread last
+ ran and how often it should be expected to run.
+
o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
happen to preempt a low-priority task in the middle of an RCU
read-side critical section. This is especially damaging if
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index b63b9bb3bc0c..08651da15448 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -56,14 +56,14 @@ rcuboost:
The output of "cat rcu/rcu_preempt/rcudata" looks as follows:
- 0!c=30455 g=30456 pq=1 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
- 1!c=30719 g=30720 pq=1 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
- 2!c=30150 g=30151 pq=1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
- 3 c=31249 g=31250 pq=1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
- 4!c=29502 g=29503 pq=1 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
- 5 c=31201 g=31202 pq=1 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
- 6!c=30253 g=30254 pq=1 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
- 7 c=31178 g=31178 pq=1 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
+ 0!c=30455 g=30456 pq=1/0 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
+ 1!c=30719 g=30720 pq=1/0 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
+ 2!c=30150 g=30151 pq=1/1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
+ 3 c=31249 g=31250 pq=1/1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
+ 4!c=29502 g=29503 pq=1/0 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
+ 5 c=31201 g=31202 pq=1/0 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
+ 6!c=30253 g=30254 pq=1/0 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
+ 7 c=31178 g=31178 pq=1/0 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
This file has one line per CPU, or eight for this 8-CPU system.
The fields are as follows:
@@ -188,14 +188,14 @@ o "ca" is the number of RCU callbacks that have been adopted by this
Kernels compiled with CONFIG_RCU_BOOST=y display the following from
/debug/rcu/rcu_preempt/rcudata:
- 0!c=12865 g=12866 pq=1 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
- 1 c=14407 g=14408 pq=1 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
- 2 c=14407 g=14408 pq=1 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
- 3 c=14407 g=14408 pq=1 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
- 4 c=14405 g=14406 pq=1 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
- 5!c=14168 g=14169 pq=1 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
- 6 c=14404 g=14405 pq=1 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
- 7 c=14407 g=14408 pq=1 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
+ 0!c=12865 g=12866 pq=1/0 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
+ 1 c=14407 g=14408 pq=1/0 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
+ 2 c=14407 g=14408 pq=1/0 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
+ 3 c=14407 g=14408 pq=1/0 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
+ 4 c=14405 g=14406 pq=1/0 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
+ 5!c=14168 g=14169 pq=1/0 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
+ 6 c=14404 g=14405 pq=1/0 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
+ 7 c=14407 g=14408 pq=1/0 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
This is similar to the output discussed above, but contains the following
additional fields:
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 1fa1caa198eb..447671bd2927 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -10,27 +10,49 @@ kernel, the process can sometimes be daunting if you're not familiar
with "the system." This text is a collection of suggestions which
can greatly increase the chances of your change being accepted.
-Read Documentation/SubmitChecklist for a list of items to check
-before submitting code. If you are submitting a driver, also read
-Documentation/SubmittingDrivers.
+This document contains a large number of suggestions in a relatively terse
+format. For detailed information on how the kernel development process
+works, see Documentation/development-process. Also, read
+Documentation/SubmitChecklist for a list of items to check before
+submitting code. If you are submitting a driver, also read
+Documentation/SubmittingDrivers; for device tree binding patches, read
+Documentation/devicetree/bindings/submitting-patches.txt.
Many of these steps describe the default behavior of the git version
control system; if you use git to prepare your patches, you'll find much
of the mechanical work done for you, though you'll still need to prepare
-and document a sensible set of patches.
+and document a sensible set of patches. In general, use of git will make
+your life as a kernel developer easier.
--------------------------------------------
SECTION 1 - CREATING AND SENDING YOUR CHANGE
--------------------------------------------
+0) Obtain a current source tree
+-------------------------------
+
+If you do not have a repository with the current kernel source handy, use
+git to obtain one. You'll want to start with the mainline repository,
+which can be grabbed with:
+
+ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+
+Note, however, that you may not want to develop against the mainline tree
+directly. Most subsystem maintainers run their own trees and want to see
+patches prepared against those trees. See the "T:" entry for the subsystem
+in the MAINTAINERS file to find that tree, or simply ask the maintainer if
+the tree is not listed there.
+
+It is still possible to download kernel releases via tarballs (as described
+in the next section), but that is the hard way to do kernel development.
1) "diff -up"
------------
-Use "diff -up" or "diff -uprN" to create patches. git generates patches
-in this form by default; if you're using git, you can skip this section
-entirely.
+If you must generate your patches by hand, use "diff -up" or "diff -uprN"
+to create patches. Git generates patches in this form by default; if
+you're using git, you can skip this section entirely.
All changes to the Linux kernel occur in the form of patches, as
generated by diff(1). When creating your patch, make sure to create it
@@ -42,7 +64,7 @@ not in any lower subdirectory.
To create a patch for a single file, it is often sufficient to do:
- SRCTREE= linux-2.6
+ SRCTREE= linux
MYFILE= drivers/net/mydriver.c
cd $SRCTREE
@@ -55,17 +77,16 @@ To create a patch for multiple files, you should unpack a "vanilla",
or unmodified kernel source tree, and generate a diff against your
own source tree. For example:
- MYSRC= /devel/linux-2.6
+ MYSRC= /devel/linux
- tar xvfz linux-2.6.12.tar.gz
- mv linux-2.6.12 linux-2.6.12-vanilla
- diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \
- linux-2.6.12-vanilla $MYSRC > /tmp/patch
+ tar xvfz linux-3.19.tar.gz
+ mv linux-3.19 linux-3.19-vanilla
+ diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \
+ linux-3.19-vanilla $MYSRC > /tmp/patch
"dontdiff" is a list of files which are generated by the kernel during
the build process, and should be ignored in any diff(1)-generated
-patch. The "dontdiff" file is included in the kernel tree in
-2.6.12 and later.
+patch.
Make sure your patch does not include any extra files which do not
belong in a patch submission. Make sure to review your patch -after-
@@ -83,6 +104,7 @@ is another popular alternative.
2) Describe your changes.
+-------------------------
Describe your problem. Whether your patch is a one-line bug fix or
5000 lines of a new feature, there must be an underlying problem that
@@ -124,10 +146,10 @@ See #3, next.
When you submit or resubmit a patch or patch series, include the
complete patch description and justification for it. Don't just
say that this is version N of the patch (series). Don't expect the
-patch merger to refer back to earlier patch versions or referenced
+subsystem maintainer to refer back to earlier patch versions or referenced
URLs to find the patch description and put that into the patch.
I.e., the patch (series) and its description should be self-contained.
-This benefits both the patch merger(s) and reviewers. Some reviewers
+This benefits both the maintainers and reviewers. Some reviewers
probably didn't even receive earlier versions of the patch.
Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
@@ -156,10 +178,15 @@ Example:
platform_set_drvdata(), but left the variable "dev" unused,
delete it.
+You should also be sure to use at least the first twelve characters of the
+SHA-1 ID. The kernel repository holds a *lot* of objects, making
+collisions with shorter IDs a real possibility. Bear in mind that, even if
+there is no collision with your six-character ID now, that condition may
+change five years from now.
+
If your patch fixes a bug in a specific commit, e.g. you found an issue using
git-bisect, please use the 'Fixes:' tag with the first 12 characters of the
-SHA-1 ID, and the one line summary.
-Example:
+SHA-1 ID, and the one line summary. For example:
Fixes: e21d2170f366 ("video: remove unnecessary platform_set_drvdata()")
@@ -172,8 +199,9 @@ outputting the above style in the git log or git show commands
fixes = Fixes: %h (\"%s\")
3) Separate your changes.
+-------------------------
-Separate _logical changes_ into a single patch file.
+Separate each _logical change_ into a separate patch.
For example, if your changes include both bug fixes and performance
enhancements for a single driver, separate those changes into two
@@ -184,90 +212,116 @@ On the other hand, if you make a single change to numerous files,
group those changes into a single patch. Thus a single logical change
is contained within a single patch.
+The point to remember is that each patch should make an easily understood
+change that can be verified by reviewers. Each patch should be justifiable
+on its own merits.
+
If one patch depends on another patch in order for a change to be
complete, that is OK. Simply note "this patch depends on patch X"
in your patch description.
+When dividing your change into a series of patches, take special care to
+ensure that the kernel builds and runs properly after each patch in the
+series. Developers using "git bisect" to track down a problem can end up
+splitting your patch series at any point; they will not thank you if you
+introduce bugs in the middle.
+
If you cannot condense your patch set into a smaller set of patches,
then only post say 15 or so at a time and wait for review and integration.
-4) Style check your changes.
+4) Style-check your changes.
+----------------------------
Check your patch for basic style violations, details of which can be
found in Documentation/CodingStyle. Failure to do so simply wastes
the reviewers time and will get your patch rejected, probably
without even being read.
-At a minimum you should check your patches with the patch style
-checker prior to submission (scripts/checkpatch.pl). You should
-be able to justify all violations that remain in your patch.
-
-
+One significant exception is when moving code from one file to
+another -- in this case you should not modify the moved code at all in
+the same patch which moves it. This clearly delineates the act of
+moving the code and your changes. This greatly aids review of the
+actual differences and allows tools to better track the history of
+the code itself.
-5) Select e-mail destination.
+Check your patches with the patch style checker prior to submission
+(scripts/checkpatch.pl). Note, though, that the style checker should be
+viewed as a guide, not as a replacement for human judgment. If your code
+looks better with a violation then its probably best left alone.
-Look through the MAINTAINERS file and the source code, and determine
-if your change applies to a specific subsystem of the kernel, with
-an assigned maintainer. If so, e-mail that person. The script
-scripts/get_maintainer.pl can be very useful at this step.
+The checker reports at three levels:
+ - ERROR: things that are very likely to be wrong
+ - WARNING: things requiring careful review
+ - CHECK: things requiring thought
-If no maintainer is listed, or the maintainer does not respond, send
-your patch to the primary Linux kernel developer's mailing list,
-linux-kernel@vger.kernel.org. Most kernel developers monitor this
-e-mail list, and can comment on your changes.
+You should be able to justify all violations that remain in your
+patch.
-Do not send more than 15 patches at once to the vger mailing lists!!!
+5) Select the recipients for your patch.
+----------------------------------------
+You should always copy the appropriate subsystem maintainer(s) on any patch
+to code that they maintain; look through the MAINTAINERS file and the
+source code revision history to see who those maintainers are. The
+script scripts/get_maintainer.pl can be very useful at this step. If you
+cannot find a maintainer for the subsystem your are working on, Andrew
+Morton (akpm@linux-foundation.org) serves as a maintainer of last resort.
-Linus Torvalds is the final arbiter of all changes accepted into the
-Linux kernel. His e-mail address is <torvalds@linux-foundation.org>.
-He gets a lot of e-mail, so typically you should do your best to -avoid-
-sending him e-mail.
+You should also normally choose at least one mailing list to receive a copy
+of your patch set. linux-kernel@vger.kernel.org functions as a list of
+last resort, but the volume on that list has caused a number of developers
+to tune it out. Look in the MAINTAINERS file for a subsystem-specific
+list; your patch will probably get more attention there. Please do not
+spam unrelated lists, though.
-Patches which are bug fixes, are "obvious" changes, or similarly
-require little discussion should be sent or CC'd to Linus. Patches
-which require discussion or do not have a clear advantage should
-usually be sent first to linux-kernel. Only after the patch is
-discussed should the patch then be submitted to Linus.
+Many kernel-related lists are hosted on vger.kernel.org; you can find a
+list of them at http://vger.kernel.org/vger-lists.html. There are
+kernel-related lists hosted elsewhere as well, though.
+Do not send more than 15 patches at once to the vger mailing lists!!!
+Linus Torvalds is the final arbiter of all changes accepted into the
+Linux kernel. His e-mail address is <torvalds@linux-foundation.org>.
+He gets a lot of e-mail, and, at this point, very few patches go through
+Linus directly, so typically you should do your best to -avoid-
+sending him e-mail.
-6) Select your CC (e-mail carbon copy) list.
+If you have a patch that fixes an exploitable security bug, send that patch
+to security@kernel.org. For severe bugs, a short embargo may be considered
+to allow distrbutors to get the patch out to users; in such cases,
+obviously, the patch should not be sent to any public lists.
-Unless you have a reason NOT to do so, CC linux-kernel@vger.kernel.org.
+Patches that fix a severe bug in a released kernel should be directed
+toward the stable maintainers by putting a line like this:
-Other kernel developers besides Linus need to be aware of your change,
-so that they may comment on it and offer code review and suggestions.
-linux-kernel is the primary Linux kernel developer mailing list.
-Other mailing lists are available for specific subsystems, such as
-USB, framebuffer devices, the VFS, the SCSI subsystem, etc. See the
-MAINTAINERS file for a mailing list that relates specifically to
-your change.
+ Cc: stable@vger.kernel.org
-Majordomo lists of VGER.KERNEL.ORG at:
- <http://vger.kernel.org/vger-lists.html>
+into your patch.
-If changes affect userland-kernel interfaces, please send
-the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
-a man-pages patch, or at least a notification of the change,
-so that some information makes its way into the manual pages.
+Note, however, that some subsystem maintainers want to come to their own
+conclusions on which patches should go to the stable trees. The networking
+maintainer, in particular, would rather not see individual developers
+adding lines like the above to their patches.
-Even if the maintainer did not respond in step #5, make sure to ALWAYS
-copy the maintainer when you change their code.
+If changes affect userland-kernel interfaces, please send the MAN-PAGES
+maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
+least a notification of the change, so that some information makes its way
+into the manual pages. User-space API changes should also be copied to
+linux-api@vger.kernel.org.
For small patches you may want to CC the Trivial Patch Monkey
trivial@kernel.org which collects "trivial" patches. Have a look
into the MAINTAINERS file for its current manager.
Trivial patches must qualify for one of the following rules:
Spelling fixes in documentation
- Spelling fixes which could break grep(1)
+ Spelling fixes for errors which could break grep(1)
Warning fixes (cluttering with useless warnings is bad)
Compilation fixes (only if they are actually correct)
Runtime fixes (only if they actually fix things)
- Removing use of deprecated functions/macros (eg. check_region)
+ Removing use of deprecated functions/macros
Contact detail and documentation fixes
Non-portable code replaced by portable code (even in arch-specific,
since people copy, as long as it's trivial)
@@ -276,7 +330,8 @@ Trivial patches must qualify for one of the following rules:
-7) No MIME, no links, no compression, no attachments. Just plain text.
+6) No MIME, no links, no compression, no attachments. Just plain text.
+-----------------------------------------------------------------------
Linus and other kernel developers need to be able to read and comment
on the changes you are submitting. It is important for a kernel
@@ -299,54 +354,48 @@ you to re-send them using MIME.
See Documentation/email-clients.txt for hints about configuring
your e-mail client so that it sends your patches untouched.
-8) E-mail size.
-
-When sending patches to Linus, always follow step #7.
+7) E-mail size.
+---------------
Large changes are not appropriate for mailing lists, and some
maintainers. If your patch, uncompressed, exceeds 300 kB in size,
it is preferred that you store your patch on an Internet-accessible
-server, and provide instead a URL (link) pointing to your patch.
+server, and provide instead a URL (link) pointing to your patch. But note
+that if your patch exceeds 300 kB, it almost certainly needs to be broken up
+anyway.
+8) Respond to review comments.
+------------------------------
+Your patch will almost certainly get comments from reviewers on ways in
+which the patch can be improved. You must respond to those comments;
+ignoring reviewers is a good way to get ignored in return. Review comments
+or questions that do not lead to a code change should almost certainly
+bring about a comment or changelog entry so that the next reviewer better
+understands what is going on.
-9) Name your kernel version.
+Be sure to tell the reviewers what changes you are making and to thank them
+for their time. Code review is a tiring and time-consuming process, and
+reviewers sometimes get grumpy. Even in that case, though, respond
+politely and address the problems they have pointed out.
-It is important to note, either in the subject line or in the patch
-description, the kernel version to which this patch applies.
-If the patch does not apply cleanly to the latest kernel version,
-Linus will not apply it.
+9) Don't get discouraged - or impatient.
+----------------------------------------
+After you have submitted your change, be patient and wait. Reviewers are
+busy people and may not get to your patch right away.
+Once upon a time, patches used to disappear into the void without comment,
+but the development process works more smoothly than that now. You should
+receive comments within a week or so; if that does not happen, make sure
+that you have sent your patches to the right place. Wait for a minimum of
+one week before resubmitting or pinging reviewers - possibly longer during
+busy times like merge windows.
-10) Don't get discouraged. Re-submit.
-After you have submitted your change, be patient and wait. If Linus
-likes your change and applies it, it will appear in the next version
-of the kernel that he releases.
-
-However, if your change doesn't appear in the next version of the
-kernel, there could be any number of reasons. It's YOUR job to
-narrow down those reasons, correct what was wrong, and submit your
-updated change.
-
-It is quite common for Linus to "drop" your patch without comment.
-That's the nature of the system. If he drops your patch, it could be
-due to
-* Your patch did not apply cleanly to the latest kernel version.
-* Your patch was not sufficiently discussed on linux-kernel.
-* A style issue (see section 2).
-* An e-mail formatting issue (re-read this section).
-* A technical problem with your change.
-* He gets tons of e-mail, and yours got lost in the shuffle.
-* You are being annoying.
-
-When in doubt, solicit comments on linux-kernel mailing list.
-
-
-
-11) Include PATCH in the subject
+10) Include PATCH in the subject
+--------------------------------
Due to high e-mail traffic to Linus, and to linux-kernel, it is common
convention to prefix your subject line with [PATCH]. This lets Linus
@@ -355,7 +404,8 @@ e-mail discussions.
-12) Sign your work
+11) Sign your work
+------------------
To improve tracking of who did what, especially with patches that can
percolate to their final resting place in the kernel through several
@@ -387,11 +437,11 @@ can certify the below:
person who certified (a), (b) or (c) and I have not modified
it.
- (d) I understand and agree that this project and the contribution
- are public and that a record of the contribution (including all
- personal information I submit with it, including my sign-off) is
- maintained indefinitely and may be redistributed consistent with
- this project or the open source license(s) involved.
+ (d) I understand and agree that this project and the contribution
+ are public and that a record of the contribution (including all
+ personal information I submit with it, including my sign-off) is
+ maintained indefinitely and may be redistributed consistent with
+ this project or the open source license(s) involved.
then you just add a line saying
@@ -401,7 +451,7 @@ using your real name (sorry, no pseudonyms or anonymous contributions.)
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
-point out some special detail about the sign-off.
+point out some special detail about the sign-off.
If you are a subsystem or branch maintainer, sometimes you need to slightly
modify patches you receive in order to merge them, because the code is not
@@ -429,15 +479,15 @@ which appears in the changelog.
Special note to back-porters: It seems to be a common and useful practice
to insert an indication of the origin of a patch at the top of the commit
message (just after the subject line) to facilitate tracking. For instance,
-here's what we see in 2.6-stable :
+here's what we see in a 3.x-stable release:
- Date: Tue May 13 19:10:30 2008 +0000
+Date: Tue Oct 7 07:26:38 2014 -0400
- SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+ libata: Un-break ATA blacklist
- commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+ commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream.
-And here's what appears in 2.4 :
+And here's what might appear in an older kernel once a patch is backported:
Date: Tue May 13 22:12:27 2008 +0200
@@ -446,18 +496,19 @@ And here's what appears in 2.4 :
[backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
Whatever the format, this information provides a valuable help to people
-tracking your trees, and to people trying to trouble-shoot bugs in your
+tracking your trees, and to people trying to troubleshoot bugs in your
tree.
-13) When to use Acked-by: and Cc:
+12) When to use Acked-by: and Cc:
+---------------------------------
The Signed-off-by: tag indicates that the signer was involved in the
development of the patch, or that he/she was in the patch's delivery path.
If a person was not directly involved in the preparation or handling of a
patch but wishes to signify and record their approval of it then they can
-arrange to have an Acked-by: line added to the patch's changelog.
+ask to have an Acked-by: line added to the patch's changelog.
Acked-by: is often used by the maintainer of the affected code when that
maintainer neither contributed to nor forwarded the patch.
@@ -465,7 +516,8 @@ maintainer neither contributed to nor forwarded the patch.
Acked-by: is not as formal as Signed-off-by:. It is a record that the acker
has at least reviewed the patch and has indicated acceptance. Hence patch
mergers will sometimes manually convert an acker's "yep, looks good to me"
-into an Acked-by:.
+into an Acked-by: (but note that it is usually better to ask for an
+explicit ack).
Acked-by: does not necessarily indicate acknowledgement of the entire patch.
For example, if a patch affects multiple subsystems and has an Acked-by: from
@@ -477,11 +529,13 @@ list archives.
If a person has had the opportunity to comment on a patch, but has not
provided such comments, you may optionally add a "Cc:" tag to the patch.
This is the only tag which might be added without an explicit action by the
-person it names. This tag documents that potentially interested parties
-have been included in the discussion
+person it names - but it should indicate that this person was copied on the
+patch. This tag documents that potentially interested parties
+have been included in the discussion.
-14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
+13) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
+--------------------------------------------------------------------------
The Reported-by tag gives credit to people who find bugs and report them and it
hopefully inspires them to help us again in the future. Please note that if
@@ -541,7 +595,13 @@ which stable kernel versions should receive your fix. This is the preferred
method for indicating a bug fixed by the patch. See #2 above for more details.
-15) The canonical patch format
+14) The canonical patch format
+------------------------------
+
+This section describes how the patch itself should be formatted. Note
+that, if you have your patches stored in a git repository, proper patch
+formatting can be had with "git format-patch". The tools cannot create
+the necessary text, though, so read the instructions below anyway.
The canonical patch subject line is:
@@ -549,7 +609,8 @@ The canonical patch subject line is:
The canonical patch message body contains the following:
- - A "from" line specifying the patch author.
+ - A "from" line specifying the patch author (only needed if the person
+ sending the patch is not the author).
- An empty line.
@@ -656,128 +717,63 @@ See more details on the proper patch format in the following
references.
-16) Sending "git pull" requests (from Linus emails)
-
-Please write the git repo address and branch name alone on the same line
-so that I can't even by mistake pull from the wrong branch, and so
-that a triple-click just selects the whole thing.
-
-So the proper format is something along the lines of:
-
- "Please pull from
-
- git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
-
- to get these changes:"
-
-so that I don't have to hunt-and-peck for the address and inevitably
-get it wrong (actually, I've only gotten it wrong a few times, and
-checking against the diffstat tells me when I get it wrong, but I'm
-just a lot more comfortable when I don't have to "look for" the right
-thing to pull, and double-check that I have the right branch-name).
-
-
-Please use "git diff -M --stat --summary" to generate the diffstat:
-the -M enables rename detection, and the summary enables a summary of
-new/deleted or renamed files.
-
-With rename detection, the statistics are rather different [...]
-because git will notice that a fair number of the changes are renames.
-
------------------------------------
-SECTION 2 - HINTS, TIPS, AND TRICKS
------------------------------------
-
-This section lists many of the common "rules" associated with code
-submitted to the kernel. There are always exceptions... but you must
-have a really good reason for doing so. You could probably call this
-section Linus Computer Science 101.
-
-
-
-1) Read Documentation/CodingStyle
-
-Nuff said. If your code deviates too much from this, it is likely
-to be rejected without further review, and without comment.
-
-One significant exception is when moving code from one file to
-another -- in this case you should not modify the moved code at all in
-the same patch which moves it. This clearly delineates the act of
-moving the code and your changes. This greatly aids review of the
-actual differences and allows tools to better track the history of
-the code itself.
-
-Check your patches with the patch style checker prior to submission
-(scripts/checkpatch.pl). The style checker should be viewed as
-a guide not as the final word. If your code looks better with
-a violation then its probably best left alone.
-
-The checker reports at three levels:
- - ERROR: things that are very likely to be wrong
- - WARNING: things requiring careful review
- - CHECK: things requiring thought
-
-You should be able to justify all violations that remain in your
-patch.
-
-
-
-2) #ifdefs are ugly
-
-Code cluttered with ifdefs is difficult to read and maintain. Don't do
-it. Instead, put your ifdefs in a header, and conditionally define
-'static inline' functions, or macros, which are used in the code.
-Let the compiler optimize away the "no-op" case.
-
-Simple example, of poor code:
-
- dev = alloc_etherdev (sizeof(struct funky_private));
- if (!dev)
- return -ENODEV;
- #ifdef CONFIG_NET_FUNKINESS
- init_funky_net(dev);
- #endif
-
-Cleaned-up example:
-
-(in header)
- #ifndef CONFIG_NET_FUNKINESS
- static inline void init_funky_net (struct net_device *d) {}
- #endif
+15) Sending "git pull" requests
+-------------------------------
-(in the code itself)
- dev = alloc_etherdev (sizeof(struct funky_private));
- if (!dev)
- return -ENODEV;
- init_funky_net(dev);
+If you have a series of patches, it may be most convenient to have the
+maintainer pull them directly into the subsystem repository with a
+"git pull" operation. Note, however, that pulling patches from a developer
+requires a higher degree of trust than taking patches from a mailing list.
+As a result, many subsystem maintainers are reluctant to take pull
+requests, especially from new, unknown developers. If in doubt you can use
+the pull request as the cover letter for a normal posting of the patch
+series, giving the maintainer the option of using either.
+A pull request should have [GIT] or [PULL] in the subject line. The
+request itself should include the repository name and the branch of
+interest on a single line; it should look something like:
+ Please pull from
-3) 'static inline' is better than a macro
+ git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
-Static inline functions are greatly preferred over macros.
-They provide type safety, have no length limitations, no formatting
-limitations, and under gcc they are as cheap as macros.
+ to get these changes:"
-Macros should only be used for cases where a static inline is clearly
-suboptimal [there are a few, isolated cases of this in fast paths],
-or where it is impossible to use a static inline function [such as
-string-izing].
+A pull request should also include an overall message saying what will be
+included in the request, a "git shortlog" listing of the patches
+themselves, and a diffstat showing the overall effect of the patch series.
+The easiest way to get all this information together is, of course, to let
+git do it for you with the "git request-pull" command.
-'static inline' is preferred over 'static __inline__', 'extern inline',
-and 'extern __inline__'.
+Some maintainers (including Linus) want to see pull requests from signed
+commits; that increases their confidence that the request actually came
+from you. Linus, in particular, will not pull from public hosting sites
+like GitHub in the absence of a signed tag.
+The first step toward creating such tags is to make a GNUPG key and get it
+signed by one or more core kernel developers. This step can be hard for
+new developers, but there is no way around it. Attending conferences can
+be a good way to find developers who can sign your key.
+Once you have prepared a patch series in git that you wish to have somebody
+pull, create a signed tag with "git tag -s". This will create a new tag
+identifying the last commit in the series and containing a signature
+created with your private key. You will also have the opportunity to add a
+changelog-style message to the tag; this is an ideal place to describe the
+effects of the pull request as a whole.
-4) Don't over-design.
+If the tree the maintainer will be pulling from is not the repository you
+are working from, don't forget to push the signed tag explicitly to the
+public tree.
-Don't try to anticipate nebulous future cases which may or may not
-be useful: "Make it as simple as you can, and no simpler."
+When generating your pull request, use the signed tag as the target. A
+command like this will do the trick:
+ git request-pull master git://my.public.tree/linux.git my-signed-tag
----------------------
-SECTION 3 - REFERENCES
+SECTION 2 - REFERENCES
----------------------
Andrew Morton, "The perfect patch" (tpp).
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index b60d2ab69497..9b121a569ab4 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -243,7 +243,7 @@ input driver:
.owner = THIS_MODULE,
.pm = &mpu3050_pm,
.of_match_table = mpu3050_of_match,
- .acpi_match_table ACPI_PTR(mpu3050_acpi_match),
+ .acpi_match_table = ACPI_PTR(mpu3050_acpi_match),
},
.probe = mpu3050_probe,
.remove = mpu3050_remove,
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 3b08bc2b04cf..8edb9007844e 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -2,11 +2,15 @@
- this file
Booting
- requirements for booting
+CCN.txt
+ - Cache Coherent Network ring-bus and perf PMU driver.
Interrupts
- ARM Interrupt subsystem documentation
IXP4xx
- Intel IXP4xx Network processor.
-msm
+Makefile
+ - Build sourcefiles as part of the Documentation-build for arm
+msm/
- MSM specific documentation
Netwinder
- Netwinder specific documentation
@@ -18,11 +22,9 @@ README
- General ARM documentation
SA1100/
- SA1100 documentation
-Samsung-S3C24XX
+Samsung-S3C24XX/
- S3C24XX ARM Linux Overview
-Sharp-LH
- - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
-SPEAr
+SPEAr/
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt
deleted file mode 100644
index 3ed82383efea..000000000000
--- a/Documentation/arm/Samsung-S3C24XX/DMA.txt
+++ /dev/null
@@ -1,46 +0,0 @@
- S3C2410 DMA
- ===========
-
-Introduction
-------------
-
- The kernel provides an interface to manage DMA transfers
- using the DMA channels in the CPU, so that the central
- duty of managing channel mappings, and programming the
- channel generators is in one place.
-
-
-DMA Channel Ordering
---------------------
-
- Many of the range do not have connections for the DMA
- channels to all sources, which means that some devices
- have a restricted number of channels that can be used.
-
- To allow flexibility for each CPU type and board, the
- DMA code can be given a DMA ordering structure which
- allows the order of channel search to be specified, as
- well as allowing the prohibition of certain claims.
-
- struct s3c24xx_dma_order has a list of channels, and
- each channel within has a slot for a list of DMA
- channel numbers. The slots are searched in order for
- the presence of a DMA channel number with DMA_CH_VALID
- or-ed in.
-
- If the order has the flag DMA_CH_NEVER set, then after
- checking the channel list, the system will return no
- found channel, thus denying the request.
-
- A board support file can call s3c24xx_dma_order_set()
- to register a complete ordering set. The routine will
- copy the data, so the original can be discarded with
- __initdata.
-
-
-Authour
--------
-
-Ben Dooks,
-Copyright (c) 2007 Ben Dooks, Simtec Electronics
-Licensed under the GPL v2
diff --git a/Documentation/arm64/legacy_instructions.txt b/Documentation/arm64/legacy_instructions.txt
index a3b3da2ec6ed..01bf3d9fac85 100644
--- a/Documentation/arm64/legacy_instructions.txt
+++ b/Documentation/arm64/legacy_instructions.txt
@@ -32,6 +32,9 @@ The default mode depends on the status of the instruction in the
architecture. Deprecated instructions should default to emulation
while obsolete instructions must be undefined by default.
+Note: Instruction emulation may not be possible in all cases. See
+individual instruction notes for further information.
+
Supported legacy instructions
-----------------------------
* SWP{B}
@@ -43,3 +46,12 @@ Default: Undef (0)
Node: /proc/sys/abi/cp15_barrier
Status: Deprecated
Default: Emulate (1)
+
+* SETEND
+Node: /proc/sys/abi/setend
+Status: Deprecated
+Default: Emulate (1)*
+Note: All the cpus on the system must have mixed endian support at EL0
+for this feature to be enabled. If a new CPU - which doesn't support mixed
+endian - is hotplugged in after this feature has been enabled, there could
+be unexpected results in the application.
diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile
index c7e6c99bad81..03f78059d6f5 100644
--- a/Documentation/blackfin/Makefile
+++ b/Documentation/blackfin/Makefile
@@ -1,3 +1,5 @@
ifneq ($(CONFIG_BLACKFIN),)
+ifneq ($(CONFIG_BFIN_GPTIMERS,)
obj-m := gptimers-example.o
endif
+endif
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index d79b008e4a32..3f9f808b5119 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -317,10 +317,10 @@ maps this page at its virtual address.
about doing this.
The idea is, first at flush_dcache_page() time, if
- page->mapping->i_mmap is an empty tree and ->i_mmap_nonlinear
- an empty list, just mark the architecture private page flag bit.
- Later, in update_mmu_cache(), a check is made of this flag bit,
- and if set the flush is done and the flag bit is cleared.
+ page->mapping->i_mmap is an empty tree, just mark the architecture
+ private page flag bit. Later, in update_mmu_cache(), a check is
+ made of this flag bit, and if set the flush is done and the flag
+ bit is cleared.
IMPORTANT NOTE: It is often important, if you defer the flush,
that the actual flush occurs on the same CPU
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
index bc461b6425a7..96ce071a3633 100644
--- a/Documentation/cgroups/00-INDEX
+++ b/Documentation/cgroups/00-INDEX
@@ -24,3 +24,5 @@ net_prio.txt
- Network priority cgroups details and usages.
resource_counter.txt
- Resource Counter API.
+unified-hierarchy.txt
+ - Description the new/next cgroup interface.
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 4f4563277864..71daa35ec2d9 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -327,6 +327,85 @@ supported and the interface files "release_agent" and
- use_hierarchy is on by default and the cgroup file for the flag is
not created.
+- The original lower boundary, the soft limit, is defined as a limit
+ that is per default unset. As a result, the set of cgroups that
+ global reclaim prefers is opt-in, rather than opt-out. The costs
+ for optimizing these mostly negative lookups are so high that the
+ implementation, despite its enormous size, does not even provide the
+ basic desirable behavior. First off, the soft limit has no
+ hierarchical meaning. All configured groups are organized in a
+ global rbtree and treated like equal peers, regardless where they
+ are located in the hierarchy. This makes subtree delegation
+ impossible. Second, the soft limit reclaim pass is so aggressive
+ that it not just introduces high allocation latencies into the
+ system, but also impacts system performance due to overreclaim, to
+ the point where the feature becomes self-defeating.
+
+ The memory.low boundary on the other hand is a top-down allocated
+ reserve. A cgroup enjoys reclaim protection when it and all its
+ ancestors are below their low boundaries, which makes delegation of
+ subtrees possible. Secondly, new cgroups have no reserve per
+ default and in the common case most cgroups are eligible for the
+ preferred reclaim pass. This allows the new low boundary to be
+ efficiently implemented with just a minor addition to the generic
+ reclaim code, without the need for out-of-band data structures and
+ reclaim passes. Because the generic reclaim code considers all
+ cgroups except for the ones running low in the preferred first
+ reclaim pass, overreclaim of individual groups is eliminated as
+ well, resulting in much better overall workload performance.
+
+- The original high boundary, the hard limit, is defined as a strict
+ limit that can not budge, even if the OOM killer has to be called.
+ But this generally goes against the goal of making the most out of
+ the available memory. The memory consumption of workloads varies
+ during runtime, and that requires users to overcommit. But doing
+ that with a strict upper limit requires either a fairly accurate
+ prediction of the working set size or adding slack to the limit.
+ Since working set size estimation is hard and error prone, and
+ getting it wrong results in OOM kills, most users tend to err on the
+ side of a looser limit and end up wasting precious resources.
+
+ The memory.high boundary on the other hand can be set much more
+ conservatively. When hit, it throttles allocations by forcing them
+ into direct reclaim to work off the excess, but it never invokes the
+ OOM killer. As a result, a high boundary that is chosen too
+ aggressively will not terminate the processes, but instead it will
+ lead to gradual performance degradation. The user can monitor this
+ and make corrections until the minimal memory footprint that still
+ gives acceptable performance is found.
+
+ In extreme cases, with many concurrent allocations and a complete
+ breakdown of reclaim progress within the group, the high boundary
+ can be exceeded. But even then it's mostly better to satisfy the
+ allocation from the slack available in other groups or the rest of
+ the system than killing the group. Otherwise, memory.max is there
+ to limit this type of spillover and ultimately contain buggy or even
+ malicious applications.
+
+- The original control file names are unwieldy and inconsistent in
+ many different ways. For example, the upper boundary hit count is
+ exported in the memory.failcnt file, but an OOM event count has to
+ be manually counted by listening to memory.oom_control events, and
+ lower boundary / soft limit events have to be counted by first
+ setting a threshold for that value and then counting those events.
+ Also, usage and limit files encode their units in the filename.
+ That makes the filenames very long, even though this is not
+ information that a user needs to be reminded of every time they type
+ out those names.
+
+ To address these naming issues, as well as to signal clearly that
+ the new interface carries a new configuration model, the naming
+ conventions in it necessarily differ from the old interface.
+
+- The original limit files indicate the state of an unset limit with a
+ Very High Number, and a configured limit can be unset by echoing -1
+ into those files. But that very high number is implementation and
+ architecture dependent and not very descriptive. And while -1 can
+ be understood as an underflow into the highest possible value, -2 or
+ -10M etc. do not work, so it's not consistent.
+
+ memory.low, memory.high, and memory.max will use the string
+ "infinity" to indicate and set the highest possible value.
5. Planned Changes
diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt
index 765d7fc0e692..655750743fb0 100644
--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -37,6 +37,14 @@ controlling P state selection. These files have been added to
no_turbo: limits the driver to selecting P states below the turbo
frequency range.
+ turbo_pct: displays the percentage of the total performance that
+ is supported by hardware that is in the turbo range. This number
+ is independent of whether turbo has been disabled or not.
+
+ num_pstates: displays the number of pstates that are supported
+ by hardware. This number is independent of whether turbo has
+ been disabled or not.
+
For contemporary Intel processors, the frequency is controlled by the
processor itself and the P-states exposed to software are related to
performance levels. The idea that frequency can be set to a single
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 556c8665fdbf..b78564b2b201 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -23,7 +23,7 @@ Required nodes:
range of 0x200 bytes.
- syscon: the root node of the Integrator platforms must have a
- system controller node pointong to the control registers,
+ system controller node pointing to the control registers,
with the compatible string
"arm,integrator-ap-syscon"
"arm,integrator-cp-syscon"
diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
index 3c436cc4f35d..430608ec09f0 100644
--- a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
@@ -79,7 +79,9 @@ reboot
Required properties
- compatible
- The string property "brcm,brcmstb-reboot".
+ The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
+ the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
+ chips with the old SUN_TOP_CTRL interface.
- syscon
A phandle / integer array that points to the syscon node which describes
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index d790f49066f3..a3089359aaa6 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -38,8 +38,6 @@ its hardware characteristcs.
AMBA markee):
- "arm,coresight-replicator"
- * id: a unique number that will identify this replicator.
-
* port or ports: same as above.
* Optional properties for ETM/PTMs:
@@ -94,8 +92,6 @@ Example:
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
- /* this will show up in debugfs as "0.replicator" */
- id = <0>;
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index b2aacbe16ed9..8b9e0a95de31 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -175,6 +175,7 @@ nodes to be present and contain the properties described below.
"marvell,pj4a"
"marvell,pj4b"
"marvell,sheeva-v5"
+ "nvidia,tegra132-denver"
"qcom,krait"
"qcom,scorpion"
- enable-method
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
new file mode 100644
index 000000000000..953fb640d9c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fw-cfg.txt
@@ -0,0 +1,72 @@
+* QEMU Firmware Configuration bindings for ARM
+
+QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
+provide the following Firmware Configuration interface on the "virt" machine
+type:
+
+- A write-only, 16-bit wide selector (or control) register,
+- a read-write, 64-bit wide data register.
+
+QEMU exposes the control and data register to ARM guests as memory mapped
+registers; their location is communicated to the guest's UEFI firmware in the
+DTB that QEMU places at the bottom of the guest's DRAM.
+
+The guest writes a selector value (a key) to the selector register, and then
+can read the corresponding data (produced by QEMU) via the data register. If
+the selected entry is writable, the guest can rewrite it through the data
+register.
+
+The selector register takes keys in big endian byte order.
+
+The data register allows accesses with 8, 16, 32 and 64-bit width (only at
+offset 0 of the register). Accesses larger than a byte are interpreted as
+arrays, bundled together only for better performance. The bytes constituting
+such a word, in increasing address order, correspond to the bytes that would
+have been transferred by byte-wide accesses in chronological order.
+
+The interface allows guest firmware to download various parameters and blobs
+that affect how the firmware works and what tables it installs for the guest
+OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
+initrd images for direct kernel booting, virtual machine UUID, SMP information,
+virtual NUMA topology, and so on.
+
+The authoritative registry of the valid selector values and their meanings is
+the QEMU source code; the structure of the data blobs corresponding to the
+individual key values is also defined in the QEMU source code.
+
+The presence of the registers can be verified by selecting the "signature" blob
+with key 0x0000, and reading four bytes from the data register. The returned
+signature is "QEMU".
+
+The outermost protocol (involving the write / read sequences of the control and
+data registers) is expected to be versioned, and/or described by feature bits.
+The interface revision / feature bitmap can be retrieved with key 0x0001. The
+blob to be read from the data register has size 4, and it is to be interpreted
+as a uint32_t value in little endian byte order. The current value
+(corresponding to the above outer protocol) is zero.
+
+The guest kernel is not expected to use these registers (although it is
+certainly allowed to); the device tree bindings are documented here because
+this is where device tree bindings reside in general.
+
+Required properties:
+
+- compatible: "qemu,fw-cfg-mmio".
+
+- reg: the MMIO region used by the device.
+ * Bytes 0x0 to 0x7 cover the data register.
+ * Bytes 0x8 to 0x9 cover the selector register.
+ * Further registers may be appended to the region in case of future interface
+ revisions / feature bits.
+
+Example:
+
+/ {
+ #size-cells = <0x2>;
+ #address-cells = <0x2>;
+
+ fw-cfg@9020000 {
+ compatible = "qemu,fw-cfg-mmio";
+ reg = <0x0 0x9020000 0x0 0xa>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 8112d0c3675a..c97484b73e72 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -32,12 +32,16 @@ Main node required properties:
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
+ 2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
- 8 = active low level-sensitive
+ 8 = active low level-sensitive (invalid for SPIs).
bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
the 8 possible cpus attached to the GIC. A bit set to '1' indicated
the interrupt is wired to that CPU. Only valid for PPI interrupts.
+ Also note that the configurability of PPI interrupts is IMPLEMENTATION
+ DEFINED and as such not guaranteed to be present (most SoC available
+ in 2014 seem to ignore the setting of this flag and use the hardware
+ default value).
- reg : Specifies base physical address(s) and size of the GIC registers. The
first region is the GIC distributor register base and size. The 2nd region is
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 292ef7ca3058..0dbabe9a6b0a 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -57,6 +57,16 @@ Optional properties:
- cache-id-part: cache id part number to be used if it is not present
on hardware
- wt-override: If present then L2 is forced to Write through mode
+- arm,double-linefill : Override double linefill enable setting. Enable if
+ non-zero, disable if zero.
+- arm,double-linefill-incr : Override double linefill on INCR read. Enable
+ if non-zero, disable if zero.
+- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable
+ if non-zero, disable if zero.
+- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero,
+ disable if zero.
+- arm,prefetch-offset : Override prefetch offset value. Valid values are
+ 0-7, 15, 23, and 31.
Example:
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 000000000000..31a629dc75b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+ - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
index 234406d41c12..067c9790062f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -1,7 +1,10 @@
NVIDIA Tegra AHB
Required properties:
-- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb"
+- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For
+ Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain
+ '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
+ tegra132, or tegra210.
- reg : Should contain 1 register ranges(address and length)
Example:
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 2fd50511ab4b..02c27004d4a8 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -6,7 +6,11 @@ modes. It provides power-gating controllers for SoC and CPU power-islands.
Required properties:
- name : Should be pmc
-- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-pmc". For Tegra30,
+ must contain "nvidia,tegra30-pmc". For Tegra114, must contain
+ "nvidia,tegra114-pmc". For Tegra124, must contain "nvidia,tegra124-pmc".
+ Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the
+ above, where <chip> is tegra132.
- reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
diff --git a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
new file mode 100644
index 000000000000..a4f15262d717
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
@@ -0,0 +1,10 @@
+ARM Versatile system registers
+--------------------------------------
+
+This is a system control registers block, providing multiple low level
+platform functions like board detection and identification, software
+interrupt generation, MMC and NOR Flash control etc.
+
+Required node properties:
+- compatible value : = "arm,versatile-sysreg", "syscon"
+- reg : physical base address and the size of the registers window
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 4ab09f2202d4..c2340eeeb97f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -37,9 +37,10 @@ Required properties when using sub-nodes:
Sub-nodes required properties:
-- reg : the port number
-- phys : reference to the SATA PHY node
-
+- reg : the port number
+And at least one of the following properties:
+- phys : reference to the SATA PHY node
+- target-supply : regulator for SATA target power
Examples:
sata@ffe08000 {
@@ -68,10 +69,12 @@ With sub-nodes:
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy 0>;
+ target-supply = <&reg_sata0>;
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy 1>;
+ target-supply = <&reg_sata1>;;
};
};
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt
index 946f2072570b..66c83c3e8915 100644
--- a/Documentation/devicetree/bindings/ata/tegra-sata.txt
+++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt
@@ -1,7 +1,9 @@
Tegra124 SoC SATA AHCI controller
Required properties :
-- compatible : "nvidia,tegra124-ahci".
+- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
+ must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
+ is tegra132.
- reg : Should contain 2 entries:
- AHCI register set (SATA BAR5)
- SATA register set
diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt
index b0e97144cfb1..92672235de57 100644
--- a/Documentation/devicetree/bindings/c6x/dscr.txt
+++ b/Documentation/devicetree/bindings/c6x/dscr.txt
@@ -12,7 +12,7 @@ configuration register for writes. These configuration register may be used to
enable (and disable in some cases) SoC pin drivers, select peripheral clock
sources (internal or pin), etc. In some cases, a configuration register is
write once or the individual bits are write once. In addition to device config,
-the DSCR block may provide registers which which are used to reset peripherals,
+the DSCR block may provide registers which are used to reset peripherals,
provide device ID information, provide ethernet MAC addresses, as well as other
miscellaneous functions.
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
new file mode 100644
index 000000000000..b54bf3a2ff57
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -0,0 +1,110 @@
+
+* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
+
+The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+each IP. PPMU provides the primitive values to get performance data. These
+PPMU events provide information of the SoC's behaviors so that you may
+use to analyze system performance, to make behaviors visible and to count
+usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
+The Exynos PPMU driver uses the devfreq-event class to provide event data
+to various devfreq devices. The devfreq devices would use the event data when
+derterming the current state of each IP.
+
+Required properties:
+- compatible: Should be "samsung,exynos-ppmu".
+- reg: physical base address of each PPMU and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the PPMU, "ppmu"
+- clocks : phandles for clock specified in "clock-names" property
+- #clock-cells: should be 1.
+
+Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+
+ ppmu_dmc0: ppmu_dmc0@106a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106a0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_dmc1: ppmu_dmc1@106b0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_cpu: ppmu_cpu@106c0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106c0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_rightbus: ppmu_rightbus@112a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x112a0000 0x2000>;
+ clocks = <&cmu CLK_PPMURIGHT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_leftbus: ppmu_leftbus0@116a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x116a0000 0x2000>;
+ clocks = <&cmu CLK_PPMULEFT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
+
+ &ppmu_dmc0 {
+ status = "okay";
+
+ events {
+ ppmu_dmc0_3: ppmu-event3-dmc0 {
+ event-name = "ppmu-event3-dmc0";
+ };
+
+ ppmu_dmc0_2: ppmu-event2-dmc0 {
+ event-name = "ppmu-event2-dmc0";
+ };
+
+ ppmu_dmc0_1: ppmu-event1-dmc0 {
+ event-name = "ppmu-event1-dmc0";
+ };
+
+ ppmu_dmc0_0: ppmu-event0-dmc0 {
+ event-name = "ppmu-event0-dmc0";
+ };
+ };
+ };
+
+ &ppmu_dmc1 {
+ status = "okay";
+
+ events {
+ ppmu_dmc1_3: ppmu-event3-dmc1 {
+ event-name = "ppmu-event3-dmc1";
+ };
+ };
+ };
+
+ &ppmu_leftbus {
+ status = "okay";
+
+ events {
+ ppmu_leftbus_3: ppmu-event3-leftbus {
+ event-name = "ppmu-event3-leftbus";
+ };
+ };
+ };
+
+ &ppmu_rightbus {
+ status = "okay";
+
+ events {
+ ppmu_rightbus_3: ppmu-event3-rightbus {
+ event-name = "ppmu-event3-rightbus";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index df0f48bcf75a..f7e21b1c2a05 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -1,6 +1,6 @@
* Renesas R-Car DMA Controller Device Tree bindings
-Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
controller instances named DMAC capable of serving multiple clients. Channels
can be dedicated to specific clients or shared between a large number of
clients.
diff --git a/Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt
new file mode 100644
index 000000000000..ebc1a914bda3
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
+
+The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+See ../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be "atmel,hlcdc-display-controller"
+ - pinctrl-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the default pinctrl states.
+ - #address-cells: should be set to 1.
+ - #size-cells: should be set to 0.
+
+Required children nodes:
+ Children nodes are encoding available output ports and their connections
+ to external devices using the OF graph reprensentation (see ../graph.txt).
+ At least one port node is required.
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
new file mode 100644
index 000000000000..a905c1413558
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
@@ -0,0 +1,50 @@
+DesignWare HDMI bridge bindings
+
+Required properties:
+- compatible: platform specific such as:
+ * "snps,dw-hdmi-tx"
+ * "fsl,imx6q-hdmi"
+ * "fsl,imx6dl-hdmi"
+ * "rockchip,rk3288-dw-hdmi"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The HDMI interrupt number
+- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
+ as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
+ the clocks are soc specific, the clock-names should be "iahb", "isfr"
+-port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/drm/imx/hdmi.txt
+ * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+
+Optional properties
+- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+ hdmi: hdmi@0120000 {
+ compatible = "fsl,imx6q-hdmi";
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks 123>, <&clks 124>;
+ clock-names = "iahb", "isfr";
+ ddc-i2c-bus = <&i2c2>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index aca917fe2ba7..a29a55f3d937 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -2,6 +2,8 @@ Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
+ * "qcom,hdmi-tx-8084"
+ * "qcom,hdmi-tx-8074"
* "qcom,hdmi-tx-8660"
* "qcom,hdmi-tx-8960"
- reg: Physical base address and length of the controller's registers
diff --git a/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt
new file mode 100644
index 000000000000..9b027a615486
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt
@@ -0,0 +1,17 @@
+Altera SOCFPGA FPGA Manager
+
+Required properties:
+- compatible : should contain "altr,socfpga-fpga-mgr"
+- reg : base address and size for memory mapped io.
+ - The first index is for FPGA manager register access.
+ - The second index is for writing FPGA configuration data.
+- interrupts : interrupt for the FPGA Manager device.
+
+Example:
+
+ hps_0_fpgamgr: fpgamgr@0xff706000 {
+ compatible = "altr,socfpga-fpga-mgr";
+ reg = <0xFF706000 0x1000
+ 0xFFB90000 0x1000>;
+ interrupts = <0 175 4>;
+ };
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
index d8c98c7614d0..23e1d3194174 100644
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -1,11 +1,11 @@
NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
Required properties:
-- compatible : should be:
- "nvidia,tegra20-efuse"
- "nvidia,tegra30-efuse"
- "nvidia,tegra114-efuse"
- "nvidia,tegra124-efuse"
+- compatible : For Tegra20, must contain "nvidia,tegra20-efuse". For Tegra30,
+ must contain "nvidia,tegra30-efuse". For Tegra114, must contain
+ "nvidia,tegra114-efuse". For Tegra124, must contain "nvidia,tegra124-efuse".
+ Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
+ <chip> is tegra132.
Details:
nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
due to a hardware bug. Tegra20 also lacks certain information which is
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
new file mode 100644
index 000000000000..bef353f370d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
@@ -0,0 +1,20 @@
+Fujitsu MB86S7x GPIO Controller
+-------------------------------
+
+Required properties:
+- compatible: Should be "fujitsu,mb86s70-gpio"
+- reg: Base address and length of register space
+- clocks: Specify the clock
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Examples:
+ gpio0: gpio@31000000 {
+ compatible = "fujitsu,mb86s70-gpio";
+ reg = <0 0x31000000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clk 0 2 1>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
new file mode 100644
index 000000000000..5fdc843b4542
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
@@ -0,0 +1,59 @@
+* MAX732x-compatible I/O expanders
+
+Required properties:
+ - compatible: Should be one of the following:
+ - "maxim,max7319": For the Maxim MAX7319
+ - "maxim,max7320": For the Maxim MAX7320
+ - "maxim,max7321": For the Maxim MAX7321
+ - "maxim,max7322": For the Maxim MAX7322
+ - "maxim,max7323": For the Maxim MAX7323
+ - "maxim,max7324": For the Maxim MAX7324
+ - "maxim,max7325": For the Maxim MAX7325
+ - "maxim,max7326": For the Maxim MAX7326
+ - "maxim,max7327": For the Maxim MAX7327
+ - reg: I2C slave address for this device.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2.
+ - first cell is the GPIO number
+ - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+ Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+Optional properties:
+
+ The I/O expander can detect input state changes, and thus optionally act as
+ an interrupt controller. When the expander interrupt line is connected all the
+ following properties must be set. For more information please see the
+ interrupt controller device tree bindings documentation available at
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+ - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
+ - first cell is the pin number
+ - second cell is used to specify flags
+ - interrupt-parent: phandle of the parent interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
+
+ expander: max7325@6d {
+ compatible = "maxim,max7325";
+ reg = <0x6d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
+
+ expander: max7325@6d {
+ compatible = "maxim,max7325";
+ reg = <0x6d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
new file mode 100644
index 000000000000..ba2bb84eeac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
@@ -0,0 +1,40 @@
+SEMTECH SX150x GPIO expander bindings
+
+
+Required properties:
+
+- compatible: should be "semtech,sx1506q",
+ "semtech,sx1508q",
+ "semtech,sx1509q".
+
+- reg: The I2C slave address for this device.
+
+- interrupt-parent: phandle of the parent interrupt controller.
+
+- interrupts: Interrupt specifier for the controllers interrupt.
+
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+ second cell is used to specify optional parameters:
+ bit 0: polarity (0: normal, 1: inverted)
+
+- gpio-controller: Marks the device as a GPIO controller.
+
+- interrupt-controller: Marks the device as a interrupt controller.
+
+The GPIO expander can optionally be used as an interrupt controller, in
+which case it uses the default two cell specifier as described in
+Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+Example:
+
+ i2c_gpio_expander@20{
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "semtech,sx1506q";
+ reg = <0x20>;
+ interrupt-parent = <&gpio_1>;
+ interrupts = <16 0>;
+
+ gpio-controller;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
new file mode 100644
index 000000000000..dae130060537
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
@@ -0,0 +1,32 @@
+APM X-Gene Standby GPIO controller bindings
+
+This is a gpio controller in the standby domain.
+
+There are 20 GPIO pins from 0..21. There is no GPIO_DS14 or GPIO_DS15,
+only GPIO_DS8..GPIO_DS13 support interrupts. The IRQ mapping
+is currently 1-to-1 on interrupts 0x28 thru 0x2d.
+
+Required properties:
+- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+ - first cell is the pin number
+ - second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupts: Shall contain exactly 6 interrupts.
+
+Example:
+ sbgpio: sbgpio@17001000 {
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index b9bd1d64cfa6..f7a158d85862 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -69,7 +69,8 @@ GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
----------------------------------
A gpio-specifier should contain a flag indicating the GPIO polarity; active-
-high or active-low. If it does, the follow best practices should be followed:
+high or active-low. If it does, the following best practices should be
+followed:
The gpio-specifier's polarity flag should represent the physical level at the
GPIO controller that achieves (or represents, for inputs) a logically asserted
@@ -147,7 +148,7 @@ contains information structures as follows:
numeric-gpio-range ::=
<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
- gpio-phandle : phandle to pin controller node.
+ pinctrl-phandle : phandle to pin controller node
gpio-base : Base GPIO ID in the GPIO controller
pinctrl-base : Base pinctrl pin ID in the pin controller
count : The number of GPIOs/pins in this range
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index b2afdb27adeb..67a2e4e414a5 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -3,8 +3,8 @@
Required properties:
- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
- "marvell,pxa93x-gpio", "marvell,mmp-gpio" or
- "marvell,mmp2-gpio".
+ "marvell,pxa93x-gpio", "marvell,mmp-gpio",
+ "marvell,mmp2-gpio" or marvell,pxa1928-gpio.
- reg : Address and length of the register set for the device
- interrupts : Should be the port interrupt shared by all gpio pins.
There're three gpio interrupts in arch-pxa, and they're gpio0,
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index 4c32ef0b7db8..009f4bfa1590 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -197,7 +197,9 @@ of the following host1x client modules:
- sor: serial output resource
Required properties:
- - compatible: "nvidia,tegra124-sor"
+ - compatible: For Tegra124, must contain "nvidia,tegra124-sor". Otherwise,
+ must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip>
+ is tegra132.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
@@ -222,7 +224,9 @@ of the following host1x client modules:
- nvidia,dpaux: phandle to a DispayPort AUX interface
- dpaux: DisplayPort AUX interface
- - compatible: "nvidia,tegra124-dpaux"
+ - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux". Otherwise,
+ must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
+ <chip> is tegra132.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index c99eb34e640b..6b1d75f1a529 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -83,6 +83,22 @@ sti-hda:
- clock-names: names of the clocks listed in clocks property in the same
order.
+sti-dvo:
+ Required properties:
+ must be a child of sti-tvout
+ - compatible: "st,stih<chip>-dvo"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - pinctrl-0: pin control handle
+ - pinctrl-name: names of the pin control to use
+ - sti,panel: phandle of the panel connected to the DVO output
+
sti-hqvdp:
must be a child of sti-display-subsystem
Required properties:
@@ -198,6 +214,19 @@ Example:
clock-names = "pix", "hddac";
clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
};
+
+ sti-dvo@8d00400 {
+ compatible = "st,stih407-dvo";
+ reg = <0x8d00400 0x200>;
+ reg-names = "dvo-reg";
+ clock-names = "dvo_pix", "dvo",
+ "main_parent", "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvo>;
+ sti,panel = <&panel_dvo>;
+ };
};
sti-hqvdp@9c000000 {
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt
index 1a69c078adf2..fcb1c6a4787b 100644
--- a/Documentation/devicetree/bindings/graph.txt
+++ b/Documentation/devicetree/bindings/graph.txt
@@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
may be described by specialized bindings depending on the type of connection.
To see how this binding applies to video pipelines, for example, see
-Documentation/device-tree/bindings/media/video-interfaces.txt.
+Documentation/devicetree/bindings/media/video-interfaces.txt.
Here the ports describe data interfaces, and the links between them are
the connecting data buses. A single port with multiple connections can
correspond to multiple devices being connected to the same physical bus.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
index 437e0db3823c..4c26fda3844a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-st.txt
@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfed40000 0x110>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_S_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index 87507e9ce6db..656716b72cc4 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -1,11 +1,11 @@
NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
Required properties:
-- compatible : should be:
- "nvidia,tegra114-i2c"
- "nvidia,tegra30-i2c"
- "nvidia,tegra20-i2c"
- "nvidia,tegra20-i2c-dvc"
+- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
+ "nvidia,tegra20-i2c". For Tegra30, must be "nvidia,tegra30-i2c".
+ For Tegra114, must be "nvidia,tegra114-i2c". Otherwise, must be
+ "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
+ tegra124, tegra132, or tegra210.
Details of compatible are as follows:
nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
controller. This only support master mode of I2C communication. Register
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 9f4e3824e71e..4dcd88d5f7ca 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -9,6 +9,7 @@ document for it just like any other devices.
Compatible Vendor / Chip
========== =============
+abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
ad,ad7414 SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
ad,adm9240 ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
adi,adt7461 +/-1C TDM Extended Temp Range I.C
@@ -34,6 +35,7 @@ atmel,24c512 i2c serial eeprom (24cxx)
atmel,24c1024 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
+capella,cm3232 CM3232: Ambient Light Sensor
catalyst,24c32 i2c serial eeprom
cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
@@ -47,6 +49,7 @@ dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
dallas,ds75 Digital Thermometer and Thermostat
dlg,da9053 DA9053: flexible system level PMIC with multicore support
+dlg,da9063 DA9063: system PMIC for quad-core application processors
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
diff --git a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
new file mode 100644
index 000000000000..904f76de9055
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
@@ -0,0 +1,22 @@
+* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
+
+Required properties:
+ - compatible: Should be "cosmic,10001-adc"
+ - reg: Should contain adc registers location and length.
+ - clock-names: Should contain "adc".
+ - clocks: Should contain a clock specifier for each entry in clock-names
+ - vref-supply: The regulator supply ADC reference voltage.
+
+Optional properties:
+ - adc-reserved-channels: Bitmask of reserved channels,
+ i.e. channels that cannot be used by the OS.
+
+Example:
+adc: adc@18101600 {
+ compatible = "cosmic,10001-adc";
+ reg = <0x18101600 0x24>;
+ adc-reserved-channels = <0x2>;
+ clocks = <&adc_clk>;
+ clock-names = "adc";
+ vref-supply = <&reg_1v8>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
new file mode 100644
index 000000000000..0fb46137f936
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -0,0 +1,129 @@
+Qualcomm's SPMI PMIC voltage ADC
+
+SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+voltage. The VADC is a 15-bit sigma-delta ADC.
+
+VADC node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,spmi-vadc".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: VADC base address and length in the SPMI PMIC register map.
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Must be one. Child node 'reg' property should define ADC
+ channel number.
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Must be zero.
+
+- #io-channel-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Must be one. For details about IIO bindings see:
+ Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+- interrupts:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: End of conversion interrupt.
+
+Channel node properties:
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: ADC channel number.
+ See include/dt-bindings/iio/qcom,spmi-vadc.h
+
+- qcom,decimation:
+ Usage: optional
+ Value type: <u32>
+ Definition: This parameter is used to decrease ADC sampling rate.
+ Quicker measurements can be made by reducing decimation ratio.
+ Valid values are 512, 1024, 2048, 4096.
+ If property is not found, default value of 512 will be used.
+
+- qcom,pre-scaling:
+ Usage: optional
+ Value type: <u32 array>
+ Definition: Used for scaling the channel input signal before the signal is
+ fed to VADC. The configuration for this node is to know the
+ pre-determined ratio and use it for post scaling. Select one from
+ the following options.
+ <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
+ If property is not found default value depending on chip will be used.
+
+- qcom,ratiometric:
+ Usage: optional
+ Value type: <empty>
+ Definition: Channel calibration type. If this property is specified
+ VADC will use the VDD reference (1.8V) and GND for channel
+ calibration. If property is not found, channel will be
+ calibrated with 0.625V and 1.25V reference channels, also
+ known as absolute calibration.
+
+- qcom,hw-settle-time:
+ Usage: optional
+ Value type: <u32>
+ Definition: Time between AMUX getting configured and the ADC starting
+ conversion. Delay = 100us * (value) for value < 11, and
+ 2ms * (value - 10) otherwise.
+ Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
+ 900 us and 1, 2, 4, 6, 8, 10 ms
+ If property is not found, channel will use 0us.
+
+- qcom,avg-samples:
+ Usage: optional
+ Value type: <u32>
+ Definition: Number of samples to be used for measurement.
+ Averaging provides the option to obtain a single measurement
+ from the ADC that is an average of multiple samples. The value
+ selected is 2^(value).
+ Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
+ If property is not found, 1 sample will be used.
+
+NOTE:
+
+Following channels, also known as reference point channels, are used for
+result calibration and their channel configuration nodes should be defined:
+VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+VADC_GND_REF and VADC_VDD_VADC.
+
+Example:
+
+ /* VADC node */
+ pmic_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ /* Channel node */
+ usb_id_nopull {
+ reg = <VADC_LR_MUX10_USB_ID>;
+ qcom,decimation = <512>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,avg-samples = <1>;
+ qcom,pre-scaling = <1 3>;
+ };
+ };
+
+ /* IIO client node */
+ usb {
+ io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
+ io-channel-names = "vadc";
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt
new file mode 100644
index 000000000000..8d57571d5c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/sensorhub.txt
@@ -0,0 +1,25 @@
+Samsung Sensorhub driver
+
+Sensorhub is a MCU which manages several sensors and also plays the role
+of a virtual sensor device.
+
+Required properties:
+- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
+- spi-max-frequency: max SPI clock frequency
+- interrupt-parent: interrupt parent
+- interrupts: communication interrupt
+- ap-mcu-gpios: [out] ap to sensorhub line - used during communication
+- mcu-ap-gpios: [in] sensorhub to ap - used during communication
+- mcu-reset-gpios: [out] sensorhub reset
+
+Example:
+
+ shub_spi: shub {
+ compatible = "samsung,sensorhub-rinato";
+ spi-max-frequency = <5000000>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ ap-mcu-gpios = <&gpx0 0 0>;
+ mcu-ap-gpios = <&gpx0 4 0>;
+ mcu-reset-gpios = <&gpx0 5 0>;
+ };
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
new file mode 100644
index 000000000000..751665e8e47a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -0,0 +1,25 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+ - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupt-parent:
+ - a phandle to the interrupt controller that it is attached to.
+- interrupts: should be one of the following
+ - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+ - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+ button {
+ compatible = "ettus,e3x0-button";
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 1>, <0 31 1>;
+ interrupt-names = "press", "release";
+ }
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt
new file mode 100644
index 000000000000..3ed1c7eb2f97
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.txt
@@ -0,0 +1,21 @@
+* Regulator Haptic Device Tree Bindings
+
+Required Properties:
+ - compatible : Should be "regulator-haptic"
+ - haptic-supply : Power supply to the haptic motor.
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - max-microvolt : The maximum voltage value supplied to the haptic motor.
+ [The unit of the voltage is a micro]
+
+ - min-microvolt : The minimum voltage value supplied to the haptic motor.
+ [The unit of the voltage is a micro]
+
+Example:
+
+ haptics {
+ compatible = "regulator-haptic";
+ haptic-supply = <&motor_regulator>;
+ max-microvolt = <2700000>;
+ min-microvolt = <1100000>;
+ };
diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
new file mode 100644
index 000000000000..b9c32f6fd687
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
@@ -0,0 +1,62 @@
+Allwinner sun4i low res adc attached tablet keys
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - vref-supply: powersupply for the lradc reference voltage
+
+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+
+Required subnode-properties:
+ - label: Descriptive name of the key.
+ - linux,code: Keycode to emit.
+ - channel: Channel this key is attached to, mut be 0 or 1.
+ - voltage: Voltage in µV at lradc input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ vref-supply = <&reg_vcc3v0>;
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
index aef57791f40b..433332d3b2ba 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
@@ -2,9 +2,10 @@ sun4i resistive touchscreen controller
--------------------------------------
Required properties:
- - compatible: "allwinner,sun4i-a10-ts"
+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
- reg: mmio address range of the chip
- interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
Optional properties:
- allwinner,ts-attached: boolean indicating that an actual touchscreen is
@@ -17,4 +18,5 @@ Example:
reg = <0x01c25000 0x100>;
interrupts = <29>;
allwinner,ts-attached;
+ #thermal-sensor-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index 878549ba814d..6c4fb34823d3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -28,6 +28,20 @@ Required properties:
ti,adc-channels: List of analog inputs available for ADC.
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+Optional properties:
+- child "tsc"
+ ti,charge-delay: Length of touch screen charge delay step in terms of
+ ADC clock cycles. Charge delay value should be large
+ in order to avoid false pen-up events. This value
+ effects the overall sampling speed, hence need to be
+ kept as low as possible, while avoiding false pen-up
+ event. Start from a lower value, say 0x400, and
+ increase value until false pen-up events are avoided.
+ The pen-up detection happens immediately after the
+ charge step, so this does in fact function as a
+ hardware knob for adjusting the amount of "settling
+ time".
+
Example:
tscadc: tscadc@44e0d000 {
compatible = "ti,am3359-tscadc";
@@ -36,6 +50,7 @@ Example:
ti,x-plate-resistance = <200>;
ti,coordiante-readouts = <5>;
ti,wire-config = <0x00 0x11 0x22 0x33>;
+ ti,charge-delay = <0x400>;
};
adc {
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 000000000000..e30e0b93f2b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,17 @@
+Texas Instruments TPS65218 power button
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65218-pwrbutton"
+- interrupts: should be one of the following
+ - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Example:
+
+&tps {
+ power-button {
+ compatible = "ti,tps65218-pwrbutton";
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
new file mode 100644
index 000000000000..42d41ec84c7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
@@ -0,0 +1,21 @@
+Conexant Digicolor Interrupt Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-ic"
+- reg : Specifies base physical address and size of the interrupt controller
+ registers (IC) area
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- syscon: A phandle to the syscon node describing UC registers
+
+Example:
+
+ intc: interrupt-controller@f0000040 {
+ compatible = "cnxt,cx92755-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xf0000040 0x40>;
+ syscon = <&uc_regs>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
index c73acd060093..4f7946ae8adc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -9,6 +9,11 @@ Required properties:
- "renesas,intc-irqpin-r8a7778" (R-Car M1A)
- "renesas,intc-irqpin-r8a7779" (R-Car H1)
- "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
+
+- reg: Base address and length of each register bank used by the external
+ IRQ pins driven by the interrupt controller hardware module. The base
+ addresses, length and number of required register banks varies with soctype.
+
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
interrupts.txt in this directory
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
new file mode 100644
index 000000000000..38ce5d037722
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
@@ -0,0 +1,28 @@
+Omap2/3 intc controller
+
+On TI omap2 and 3 the intc interrupt controller can provide
+96 or 128 IRQ signals to the ARM host depending on the SoC.
+
+Required Properties:
+- compatible: should be one of
+ "ti,omap2-intc"
+ "ti,omap3-intc"
+ "ti,dm814-intc"
+ "ti,dm816-intc"
+ "ti,am33xx-intc"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1 for intc
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
new file mode 100644
index 000000000000..cd29083e16ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
@@ -0,0 +1,41 @@
+* Renesas VMSA-Compatible IOMMU
+
+The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
+It provides address translation for bus masters outside of the CPU, each
+connected to the IPMMU through a port called micro-TLB.
+
+
+Required Properties:
+
+ - compatible: Must contain "renesas,ipmmu-vmsa".
+ - reg: Base address and size of the IPMMU registers.
+ - interrupts: Specifiers for the MMU fault interrupts. For instances that
+ support secure mode two interrupts must be specified, for non-secure and
+ secure mode, in that order. For instances that don't support secure mode a
+ single interrupt must be specified.
+
+ - #iommu-cells: Must be 1.
+
+Each bus master connected to an IPMMU must reference the IPMMU in its device
+node with the following property:
+
+ - iommus: A reference to the IPMMU in two cells. The first cell is a phandle
+ to the IPMMU and the second cell the number of the micro-TLB that the
+ device is connected to.
+
+
+Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
+
+ ipmmu_mx: mmu@fe951000 {
+ compatible = "renasas,ipmmu-vmsa";
+ reg = <0 0xfe951000 0 0x1000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ };
+
+ vsp1@fe928000 {
+ ...
+ iommus = <&ipmmu_mx 13>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 2d88816dd550..34811c57db69 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -1,6 +1,19 @@
Common leds properties.
+LED and flash LED devices provide the same basic functionality as current
+regulators, but extended with LED and flash LED specific features like
+blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+Many LED devices expose more than one current output that can be connected
+to one or more discrete LED component. Since the arrangement of connections
+can influence the way of the LED device initialization, the LED components
+have to be tightly coupled with the LED device binding. They are represented
+by child nodes of the parent LED device binding.
+
Optional properties for child nodes:
+- led-sources : List of device current outputs the LED is connected to. The
+ outputs are identified by the numbers that must be defined
+ in the LED device binding documentation.
- label : The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
@@ -14,6 +27,15 @@ Optional properties for child nodes:
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
+- max-microamp : maximum intensity in microamperes of the LED
+ (torch LED for flash devices)
+- flash-max-microamp : maximum intensity in microamperes of the
+ flash LED; it is mandatory if the LED should
+ support the flash mode
+- flash-timeout-us : timeout in microseconds after which the flash
+ LED is turned off
+
+
Examples:
system-status {
@@ -21,3 +43,11 @@ system-status {
linux,default-trigger = "heartbeat";
...
};
+
+camera-flash {
+ label = "Flash";
+ led-sources = <0>, <1>;
+ max-microamp = <50000>;
+ flash-max-microamp = <320000>;
+ flash-timeout-us = <500000>;
+};
diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
new file mode 100644
index 000000000000..c2619797ce0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
@@ -0,0 +1,49 @@
+Altera Mailbox Driver
+=====================
+
+Required properties:
+- compatible : "altr,mailbox-1.0".
+- reg : physical base address of the mailbox and length of
+ memory mapped region.
+- #mbox-cells: Common mailbox binding property to identify the number
+ of cells required for the mailbox specifier. Should be 1.
+
+Optional properties:
+- interrupt-parent : interrupt source phandle.
+- interrupts : interrupt number. The interrupt specifier format
+ depends on the interrupt controller parent.
+
+Example:
+ mbox_tx: mailbox@0x100 {
+ compatible = "altr,mailbox-1.0";
+ reg = <0x100 0x8>;
+ interrupt-parent = < &gic_0 >;
+ interrupts = <5>;
+ #mbox-cells = <1>;
+ };
+
+ mbox_rx: mailbox@0x200 {
+ compatible = "altr,mailbox-1.0";
+ reg = <0x200 0x8>;
+ interrupt-parent = < &gic_0 >;
+ interrupts = <6>;
+ #mbox-cells = <1>;
+ };
+
+Mailbox client
+===============
+"mboxes" and the optional "mbox-names" (please see
+Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
+of the mboxes property should contain a phandle to the mailbox controller
+device node and second argument is the channel index. It must be 0 (hardware
+support only one channel).The equivalent "mbox-names" property value can be
+used to give a name to the communication channel to be used by the client user.
+
+Example:
+ mclient0: mclient0@0x400 {
+ compatible = "client-1.0";
+ reg = <0x400 0x10>;
+ mbox-names = "mbox-tx", "mbox-rx";
+ mboxes = <&mbox_tx 0>,
+ <&mbox_rx 0>;
+ };
diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
index 17e71b7b44c6..251f008f220c 100644
--- a/Documentation/devicetree/bindings/media/atmel-isi.txt
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@@ -38,7 +38,7 @@ Example:
i2c1: i2c@f0018000 {
ov2640: camera@0x30 {
- compatible = "omnivision,ov2640";
+ compatible = "ovti,ov2640";
reg = <0x30>;
port {
diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
new file mode 100644
index 000000000000..855e1faf73e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
@@ -0,0 +1,63 @@
+SMIA/SMIA++ sensor
+
+SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
+of that. These definitions are valid for both types of sensors.
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "nokia,smia"
+- reg: I2C address (0x10, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
+ dependent).
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor
+- link-frequencies: List of allowed data link frequencies. An array of
+ 64-bit elements.
+
+
+Optional properties
+-------------------
+
+- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
+ the NVM contents will not be read.
+- reset-gpios: XSHUTDOWN GPIO
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- clock-lanes: <0>
+- data-lanes: <1..n>
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ smiapp_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ reset-gpios = <&gpio3 20 0>;
+ vana-supply = <&vaux3>;
+ clocks = <&omap3_isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <512>; /* 8 * 64 */
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ port {
+ smiapp_1_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 23dd5ad07b7c..1811a067c72c 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -1,7 +1,7 @@
Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
Required properties:
-- compatible : should be "allwinner,sun4i-a10-ir";
+- compatible : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
- clocks : list of clock specifiers, corresponding to
entries in clock-names property;
- clock-names : should contain "apb" and "ir" entries;
@@ -10,6 +10,7 @@ Required properties:
Optional properties:
- linux,rc-map-name : Remote control map name.
+- resets : phandle + reset specifier pair
Example:
@@ -17,6 +18,7 @@ ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
clock-names = "apb", "ir";
+ resets = <&apb0_rst 1>;
interrupts = <0 5 1>;
reg = <0x01C21800 0x40>;
linux,rc-map-name = "rc-rc6-mce";
diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 000000000000..3932e766553a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@f0034000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@4802a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index ce719f89dd1c..571b4c60665f 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -103,6 +103,9 @@ Optional endpoint properties
array contains only one entry.
- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
clock mode.
+- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
+ instance, this is the actual frequency of the bus, not bits per clock per
+ lane value. An array of 64-bit unsigned integers.
Example
@@ -159,7 +162,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
i2c0: i2c@0xfff20000 {
...
ov772x_1: camera@0x21 {
- compatible = "omnivision,ov772x";
+ compatible = "ovti,ov772x";
reg = <0x21>;
vddio-supply = <&regulator1>;
vddcore-supply = <&regulator2>;
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 75fdfaf41831..e39f0bc1f55e 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -39,6 +39,12 @@ to get matched with their hardware counterparts as follow:
-BUCKn : 1-4.
Use standard regulator bindings for it ('regulator-off-in-suspend').
+ LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+ control. To turn this feature on this property must be added to the regulator
+ sub-node:
+ - maxim,ena-gpios : one GPIO specifier enable control (the gpio
+ flags are actually ignored and always
+ ACTIVE_HIGH is used)
Example:
@@ -65,4 +71,12 @@ Example:
regulator-always-on;
regulator-boot-on;
};
+
+ buck9_reg {
+ regulator-compatible = "BUCK9";
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+ };
}
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index 01e9f30fe678..38e64405e98d 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -41,6 +41,41 @@ Optional properties:
To get more informations, please refer to documentaion.
[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+- charger : Node configuring the charger driver.
+ If present, required properties:
+ - compatible : Must be "maxim,max77693-charger".
+
+ Optional properties (if not set, defaults will be used):
+ - maxim,constant-microvolt : Battery constant voltage in uV. The charger
+ will operate in fast charge constant current mode till battery voltage
+ reaches this level. Then the charger will switch to fast charge constant
+ voltage mode. Also vsys (system voltage) will be set to this value when
+ DC power is supplied but charger is not enabled.
+ Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+ Default: 4200000
+
+ - maxim,min-system-microvolt : Minimal system voltage in uV.
+ Valid values: 3000000 - 3700000, step by 100000 (rounded down)
+ Default: 3600000
+
+ - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
+ high temperature charging mode. If die temperature exceeds this value
+ the charging current will be reduced by 105 mA/Celsius.
+ Valid values: 70, 85, 100, 115
+ Default: 100
+
+ - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
+ in uA (current from battery to system).
+ Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+ Default: 3500000
+
+ - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
+ triggering input voltage regulation loop. If input voltage decreases
+ below this value, the input current will be reduced to reach the
+ threshold voltage.
+ Valid values: 4300000, 4700000, 4800000, 4900000
+ Default: 4300000
+
Example:
max77693@66 {
compatible = "maxim,max77693";
@@ -73,4 +108,14 @@ Example:
pwms = <&pwm 0 40000 0>;
pwm-names = "haptic";
};
+
+ charger {
+ compatible = "maxim,max77693-charger";
+
+ maxim,constant-microvolt = <4200000>;
+ maxim,min-system-microvolt = <3600000>;
+ maxim,thermal-regulation-celsius = <75>;
+ maxim,battery-overcurrent-microamp = <3000000>;
+ maxim,charge-input-threshold-microvolt = <4300000>;
+ };
};
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
index b97b8bef1fe5..47b205cc9cc7 100644
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -1,11 +1,10 @@
NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
Required properties:
-- compatible : should be:
- "nvidia,tegra20-apbmisc"
- "nvidia,tegra30-apbmisc"
- "nvidia,tegra114-apbmisc"
- "nvidia,tegra124-apbmisc"
+- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc". For Tegra30,
+ must be "nvidia,tegra30-apbmisc". Otherwise, must contain
+ "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
+ tegra124, tegra132.
- reg: Should contain 2 entries: the first entry gives the physical address
and length of the registers which contain revision and debug features.
The second entry gives the physical address and length of the
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
new file mode 100644
index 000000000000..0cb827bf9435
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
@@ -0,0 +1,25 @@
+* The simple eMMC hardware reset provider
+
+The purpose of this driver is to perform standard eMMC hw reset
+procedure, as descibed by Jedec 4.4 specification. This procedure is
+performed just after MMC core enabled power to the given mmc host (to
+fix possible issues if bootloader has left eMMC card in initialized or
+unknown state), and before performing complete system reboot (also in
+case of emergency reboot call). The latter is needed on boards, which
+doesn't have hardware reset logic connected to emmc card and (limited or
+broken) ROM bootloaders are unable to read second stage from the emmc
+card if the card is left in unknown or already initialized state.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-emmc".
+- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
+ and then deasserted to perform eMMC card reset. To perform
+ reset procedure as described in Jedec 4.4 specification, the
+ gpio line should be defined as GPIO_ACTIVE_LOW.
+
+Example:
+
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ }
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
new file mode 100644
index 000000000000..a462c50f19a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -0,0 +1,25 @@
+* The simple MMC power sequence provider
+
+The purpose of the simple MMC power sequence provider is to supports a set of
+common properties between various SOC designs. It thus enables us to use the
+same provider for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-simple".
+
+Optional properties:
+- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
+ at initialization and prior we start the power up procedure of the card.
+ They will be de-asserted right after the power has been provided to the
+ card.
+- clocks : Must contain an entry for the entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+ "ext_clock" (External clock provided to the card).
+
+Example:
+
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio1 12 0>;
+ }
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index b52628b18a53..438899e8829b 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -64,7 +64,43 @@ Optional SDIO properties:
- keep-power-in-suspend: Preserves card power during a suspend/resume cycle
- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
-Example:
+
+MMC power sequences:
+--------------------
+
+System on chip designs may specify a specific MMC power sequence. To
+successfully detect an (e)MMC/SD/SDIO card, that power sequence must be
+maintained while initializing the card.
+
+Optional property:
+- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+ for documentation of MMC power sequence bindings.
+
+
+Use of Function subnodes
+------------------------
+
+On embedded systems the cards connected to a host may need additional
+properties. These can be specified in subnodes to the host controller node.
+The subnodes are identified by the standard 'reg' property.
+Which information exactly can be specified depends on the bindings for the
+SDIO function driver for the subnode, as specified by the compatible string.
+
+Required host node properties when using function subnodes:
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+
+Required function subnode properties:
+- compatible: name of SDIO function following generic names recommended practice
+- reg: Must contain the SDIO function number of the function this subnode
+ describes. A value of 0 denotes the memory SD function, values from
+ 1 to 7 denote the SDIO functions.
+
+
+Examples
+--------
+
+Basic example:
sdhci@ab000000 {
compatible = "sdhci";
@@ -77,4 +113,28 @@ sdhci@ab000000 {
max-frequency = <50000000>;
keep-power-in-suspend;
enable-sdio-wakeup;
+ mmc-pwrseq = <&sdhci0_pwrseq>
}
+
+Example with sdio function subnode:
+
+mmc3: mmc@01c12000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <&reg_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&sdhci0_pwrseq>
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm43xx-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 8>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index f357c16ea815..15b8368ee1f2 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -7,7 +7,11 @@ This file documents differences between the core properties described
by mmc.txt and the properties used by the sdhci-tegra driver.
Required properties:
-- compatible : Should be "nvidia,<chip>-sdhci"
+- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci".
+ For Tegra30, must contain "nvidia,tegra30-sdhci". For Tegra114,
+ must contain "nvidia,tegra114-sdhci". For Tegra124, must contain
+ "nvidia,tegra124-sdhci". Otherwise, must contain "nvidia,<chip>-sdhci",
+ plus one of the above, where <chip> is tegra132 or tegra210.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
new file mode 100644
index 000000000000..de2c53cff4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
@@ -0,0 +1,30 @@
+* Fujitsu SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_f_sdh30 driver.
+
+Required properties:
+- compatible: "fujitsu,mb86s70-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+ list of phandles and clock-specifier pairs.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+ "iface" - clock used for sdhci interface
+ "core" - core clock for sdhci controller
+
+Optional properties:
+- vqmmc-supply: phandle to the regulator device tree node, mentioned
+ as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+
+Example:
+
+ sdhci1: mmc@36600000 {
+ compatible = "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0 0x36600000 0x1000>;
+ interrupts = <0 172 0x4>,
+ <0 173 0x4>;
+ bus-width = <4>;
+ vqmmc-supply = <&vccq_sdhci1>;
+ clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+ clock-names = "iface", "core";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 4dd6deb90719..3d1b449d6097 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -9,9 +9,13 @@ Required properties:
- reg:
* for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
the SDHCI registers.
- * for "marvell,armada-380-sdhci", two register areas. The first one
- for the SDHCI registers themselves, and the second one for the
- AXI/Mbus bridge registers of the SDHCI unit.
+
+ * for "marvell,armada-380-sdhci", three register areas. The first
+ one for the SDHCI registers themselves, the second one for the
+ AXI/Mbus bridge registers of the SDHCI unit, the third one for the
+ SDIO3 Configuration register
+- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
+ for "marvell,armada-380-sdhci"
- clocks: Array of clocks required for SDHCI; requires at least one for
I/O clock.
- clock-names: Array of names corresponding to clocks property; shall be
@@ -35,7 +39,10 @@ sdhci@d4280800 {
sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
- reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+ reg-names = "sdhci", "mbus", "conf-sdio3";
+ reg = <0xd8000 0x1000>,
+ <0xdc000 0x100>;
+ <0x18454 0x4>;
interrupts = <0 25 0x4>;
clocks = <&gateclk 17>;
clock-names = "io";
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
index 42409bfe04c4..33df3932168e 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -7,17 +7,38 @@ Required properties:
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the amd-xgbe-phy interrupt.
Optional properties:
- amd,speed-set: Speed capabilities of the device
0 - 1GbE and 10GbE (default)
1 - 2.5GbE and 10GbE
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed. All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+ 0 - Off
+ 1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+
Example:
xgbe_phy@e1240800 {
compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
reg = <0 0xe1240800 0 0x00400>,
<0 0xe1250000 0 0x00060>,
<0 0xe1250080 0 0x00004>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 323 4>;
amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
};
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
index 28767ed7c1bd..5224bf05f6f8 100644
--- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt
+++ b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
@@ -11,6 +11,8 @@ Required properties:
Optional properties:
- davicom,no-eeprom : Configuration EEPROM is not available
- davicom,ext-phy : Use external PHY
+- reset-gpios : phandle of gpio that will be used to reset chip during probe
+- vcc-supply : phandle of regulator that will be used to enable power to chip
Example:
@@ -21,4 +23,6 @@ Example:
interrupts = <7 4>;
local-mac-address = [00 00 de ad be ef];
davicom,no-eeprom;
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&eth0_power>;
};
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 032808843f90..24c5cdaba8d2 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -4,7 +4,8 @@ This file provides information, what the device node
for the davinci_emac interface contains.
Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+ "ti,dm816-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 0c8775c45798..a9eb611bee68 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -22,6 +22,8 @@ Optional properties:
- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports
hw multi queues. Should specify the rx queue number, otherwise set rx queue
number to 1.
+- fsl,magic-packet : If present, indicates that the hardware supports waking
+ up via magic packet.
Optional subnodes:
- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index be6ea8960f20..1e97532a0b79 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -8,7 +8,16 @@ of how to define a PHY.
Required properties:
- reg : Offset and length of the register set for the device
- compatible : Should define the compatible device type for the
- mdio. Currently, this is most likely to be "fsl,gianfar-mdio"
+ mdio. Currently supported strings/devices are:
+ - "fsl,gianfar-tbi"
+ - "fsl,gianfar-mdio"
+ - "fsl,etsec2-tbi"
+ - "fsl,etsec2-mdio"
+ - "fsl,ucc-mdio"
+ - "fsl,fman-mdio"
+ When device_type is "mdio", the following strings are also considered:
+ - "gianfar"
+ - "ucc_geth_phy"
Example:
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
new file mode 100644
index 000000000000..988fc694b663
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -0,0 +1,88 @@
+Hisilicon hip04 Ethernet Controller
+
+* Ethernet controller node
+
+Required properties:
+- compatible: should be "hisilicon,hip04-mac".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- port-handle: <phandle port channel>
+ phandle, specifies a reference to the syscon ppe node
+ port, port number connected to the controller
+ channel, recv channel start from channel * number (RX_DESC_NUM)
+- phy-mode: see ethernet.txt [1].
+
+Optional properties:
+- phy-handle: see ethernet.txt [1].
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+
+
+* Ethernet ppe node:
+Control rx & tx fifos of all ethernet controllers.
+Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
+Each controller's recv channel start from channel * number (RX_DESC_NUM).
+
+Required properties:
+- compatible: "hisilicon,hip04-ppe", "syscon".
+- reg: address and length of the register set for the device.
+
+
+* MDIO bus node:
+
+Required properties:
+
+- compatible: should be "hisilicon,hip04-mdio".
+- Inherits from MDIO bus node binding [2]
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+ mdio {
+ compatible = "hisilicon,hip04-mdio";
+ reg = <0x28f1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ marvell,reg-init = <18 0x14 0 0x8001>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ marvell,reg-init = <18 0x14 0 0x8001>;
+ };
+ };
+
+ ppe: ppe@28c0000 {
+ compatible = "hisilicon,hip04-ppe", "syscon";
+ reg = <0x28c0000 0x10000>;
+ };
+
+ fe: ethernet@28b0000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x28b0000 0x10000>;
+ interrupts = <0 413 4>;
+ phy-mode = "mii";
+ port-handle = <&ppe 31 0>;
+ };
+
+ ge0: ethernet@2800000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x2800000 0x10000>;
+ interrupts = <0 402 4>;
+ phy-mode = "sgmii";
+ port-handle = <&ppe 0 1>;
+ phy-handle = <&phy0>;
+ };
+
+ ge8: ethernet@2880000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x2880000 0x10000>;
+ interrupts = <0 410 4>;
+ phy-mode = "sgmii";
+ port-handle = <&ppe 8 2>;
+ phy-handle = <&phy1>;
+ };
diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
new file mode 100644
index 000000000000..f9c07710478d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
@@ -0,0 +1,197 @@
+This document describes the device tree bindings associated with the
+keystone network coprocessor(NetCP) driver support.
+
+The network coprocessor (NetCP) is a hardware accelerator that processes
+Ethernet packets. NetCP has a gigabit Ethernet (GbE) subsytem with a ethernet
+switch sub-module to send and receive packets. NetCP also includes a packet
+accelerator (PA) module to perform packet classification operations such as
+header matching, and packet modification operations such as checksum
+generation. NetCP can also optionally include a Security Accelerator (SA)
+capable of performing IPSec operations on ingress/egress packets.
+
+Keystone II SoC's also have a 10 Gigabit Ethernet Subsystem (XGbE) which
+includes a 3-port Ethernet switch sub-module capable of 10Gb/s and 1Gb/s rates
+per Ethernet port.
+
+Keystone NetCP driver has a plug-in module architecture where each of the NetCP
+sub-modules exist as a loadable kernel module which plug in to the netcp core.
+These sub-modules are represented as "netcp-devices" in the dts bindings. It is
+mandatory to have the ethernet switch sub-module for the ethernet interface to
+be operational. Any other sub-module like the PA is optional.
+
+NetCP Ethernet SubSystem Layout:
+
+-----------------------------
+ NetCP subsystem(10G or 1G)
+-----------------------------
+ |
+ |-> NetCP Devices -> |
+ | |-> GBE/XGBE Switch
+ | |
+ | |-> Packet Accelerator
+ | |
+ | |-> Security Accelerator
+ |
+ |
+ |
+ |-> NetCP Interfaces -> |
+ |-> Ethernet Port 0
+ |
+ |-> Ethernet Port 1
+ |
+ |-> Ethernet Port 2
+ |
+ |-> Ethernet Port 3
+
+
+NetCP subsystem properties:
+Required properties:
+- compatible: Should be "ti,netcp-1.0"
+- clocks: phandle to the reference clocks for the subsystem.
+- dma-id: Navigator packet dma instance id.
+
+Optional properties:
+- reg: register location and the size for the following register
+ regions in the specified order.
+ - Efuse MAC address register
+- dma-coherent: Present if dma operations are coherent
+- big-endian: Keystone devices can be operated in a mode where the DSP is in
+ the big endian mode. In such cases enable this option. This
+ option should also be enabled if the ARM is operated in
+ big endian mode with the DSP in little endian.
+
+NetCP device properties: Device specification for NetCP sub-modules.
+1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications.
+Required properties:
+- label: Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb.
+- reg: register location and the size for the following register
+ regions in the specified order.
+ - subsystem registers
+ - serdes registers
+- tx-channel: the navigator packet dma channel name for tx.
+- tx-queue: the navigator queue number associated with the tx dma channel.
+- interfaces: specification for each of the switch port to be registered as a
+ network interface in the stack.
+-- slave-port: Switch port number, 0 based numbering.
+-- link-interface: type of link interface, supported options are
+ - mac<->mac auto negotiate mode: 0
+ - mac<->phy mode: 1
+ - mac<->mac forced mode: 2
+ - mac<->fiber mode: 3
+ - mac<->phy mode with no mdio: 4
+ - 10Gb mac<->phy mode : 10
+ - 10Gb mac<->mac forced mode : 11
+----phy-handle: phandle to PHY device
+
+Optional properties:
+- enable-ale: NetCP driver keeps the address learning feature in the ethernet
+ switch module disabled. This attribute is to enable the address
+ learning.
+- secondary-slave-ports: specification for each of the switch port not be
+ registered as a network interface. NetCP driver
+ will only initialize these ports and attach PHY
+ driver to them if needed.
+
+NetCP interface properties: Interface specification for NetCP sub-modules.
+Required properties:
+- rx-channel: the navigator packet dma channel name for rx.
+- rx-queue: the navigator queue number associated with rx dma channel.
+- rx-pool: specifies the number of descriptors to be used & the region-id
+ for creating the rx descriptor pool.
+- tx-pool: specifies the number of descriptors to be used & the region-id
+ for creating the tx descriptor pool.
+- rx-queue-depth: number of descriptors in each of the free descriptor
+ queue (FDQ) for the pktdma Rx flow. There can be at
+ present a maximum of 4 queues per Rx flow.
+- rx-buffer-size: the buffer size for each of the Rx flow FDQ.
+- tx-completion-queue: the navigator queue number where the descriptors are
+ recycled after Tx DMA completion.
+
+Optional properties:
+- efuse-mac: If this is 1, then the MAC address for the interface is
+ obtained from the device efuse mac address register
+- local-mac-address: the driver is designed to use the of_get_mac_address api
+ only if efuse-mac is 0. When efuse-mac is 0, the MAC
+ address is obtained from local-mac-address. If this
+ attribute is not present, then the driver will use a
+ random MAC address.
+- "netcp-device label": phandle to the device specification for each of NetCP
+ sub-module attached to this interface.
+
+Example binding:
+
+netcp: netcp@2090000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ dma-coherent;
+ /* big-endian; */
+ dma-id = <0>;
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe@0x2090000 {
+ label = "netcp-gbe";
+ reg = <0x2090000 0xf00>;
+ /* enable-ale; */
+ tx-queue = <648>;
+ tx-channel = <8>;
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <4>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <4>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = <22>;
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8704>;
+ tx-completion-queue = <8706>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = <23>;
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8705>;
+ tx-completion-queue = <8707>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 6f];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index e4faa2e8dfeb..7bb2e213d6f9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCA NFC Controller
Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -11,6 +11,10 @@ Required properties:
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
+- ese-present: Specifies that an ese is physically connected to the nfc
+controller.
+- uicc-present: Specifies that the uicc swp signal can be physically
+connected to the nfc controller.
Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
@@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
st21nfca: st21nfca@1 {
- compatible = "st,st21nfca_i2c";
+ compatible = "st,st21nfca-i2c";
reg = <0x01>;
clock-frequency = <400000>;
@@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+ ese-present;
+ uicc-present;
};
};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
index 9005608cbbd1..bb237072dbe9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCB NFC Controller
Required properties:
-- compatible: Should be "st,st21nfcb_i2c".
+- compatible: Should be "st,st21nfcb-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
st21nfcb: st21nfcb@8 {
- compatible = "st,st21nfcb_i2c";
+ compatible = "st,st21nfcb-i2c";
reg = <0x08>;
clock-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
new file mode 100644
index 000000000000..21fd199e89b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -0,0 +1,68 @@
+Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
+
+The device node has following properties.
+
+Required properties:
+ - compatible: Can be "rockchip,rk3288-gmac".
+ - reg: addresses and length of the register sets for the device.
+ - interrupts: Should contain the GMAC interrupts.
+ - interrupt-names: Should contain the interrupt names "macirq".
+ - rockchip,grf: phandle to the syscon grf used to control speed and mode.
+ - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY.
+ <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC
+ <&cru SCLK_MAC_RX>: clock gate for RX
+ <&cru SCLK_MAC_TX>: clock gate for TX
+ <&cru SCLK_MACREF>: clock gate for RMII referce clock
+ <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
+ <&cru ACLK_GMAC>: AXI clock gate for GMAC
+ <&cru PCLK_GMAC>: APB clock gate for GMAC
+ - clock-names: One name for each entry in the clocks property.
+ - phy-mode: See ethernet.txt file in the same directory.
+ - pinctrl-names: Names corresponding to the numbered pinctrl states.
+ - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>.
+ - clock_in_out: For RGMII, it must be "input", means main clock(125MHz)
+ is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means
+ PHY provides the reference clock(50MHz), "output" means GMAC provides the
+ reference clock.
+ - snps,reset-gpio gpio number for phy reset.
+ - snps,reset-active-low boolean flag to indicate if phy reset is active low.
+ - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
+ - assigned-clock-parents = parent of main clock.
+ can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
+
+Optional properties:
+ - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+ - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+ - phy-supply: phandle to a regulator if the PHY needs one
+
+Example:
+
+gmac: ethernet@ff290000 {
+ compatible = "rockchip,rk3288-gmac";
+ reg = <0xff290000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>;
+
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+
+ status = "ok";
+};
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index 6762a6b5da7e..d05c1e1fd9b6 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -9,14 +9,10 @@ The device node has following properties.
Required properties:
- compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac",
"st,stih407-dwmac", "st,stid127-dwmac".
- - reg : Offset of the glue configuration register map in system
- configuration regmap pointed by st,syscon property and size.
- - st,syscon : Should be phandle to system configuration node which
- encompases this glue registers.
+ - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register.
- st,gmac_en: this is to enable the gmac into a dedicated sysctl control
register available on STiH407 SoC.
- - sti-ethconf: this is the gmac glue logic register to enable the GMAC,
- select among the different modes and program the clk retiming.
- pinctrl-0: pin-control for all the MII mode supported.
Optional properties:
@@ -40,10 +36,10 @@ ethernet0: dwmac@9630000 {
device_type = "network";
status = "disabled";
compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
- reg = <0x9630000 0x8000>, <0x80 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0x9630000 0x8000>;
+ reg-names = "stmmaceth";
- st,syscon = <&syscfg_sbc_reg>;
+ st,syscon = <&syscfg_sbc_reg 0x80>;
st,gmac_en;
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index c41afd963edf..8ca65cec52ae 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -43,6 +43,7 @@ Optional properties:
available this clock is used for programming the Timestamp Addend Register.
If not passed then the system clock will be used and this is fine on some
platforms.
+- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
Examples:
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
new file mode 100644
index 000000000000..edefc26c6204
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -0,0 +1,30 @@
+* Qualcomm Atheros ath10k wireless devices
+
+For ath10k devices the calibration data can be provided through Device
+Tree. The node is a child node of the PCI controller.
+
+Required properties:
+-compatible : Should be "qcom,ath10k"
+
+Optional properties:
+- qcom,ath10k-calibration-data : calibration data as an array, the
+ length can vary between hw versions
+
+
+Example:
+
+pci {
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+
+ ath10k@0,0 {
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+ qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt b/Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt
new file mode 100644
index 000000000000..b6f2f3e8f44e
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt
@@ -0,0 +1,7 @@
+Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "avic,tm070ddh03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
new file mode 100644
index 000000000000..24b0b624434b
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
@@ -0,0 +1,7 @@
+GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "giantplus,gpg48273qs5"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index d763e047c6ae..75321ae23c08 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -1,10 +1,10 @@
NVIDIA Tegra PCIe controller
Required properties:
-- compatible: Must be one of:
- - "nvidia,tegra20-pcie"
- - "nvidia,tegra30-pcie"
- - "nvidia,tegra124-pcie"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30,
+ "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie".
+ Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where
+ <chip> is tegra132 or tegra210.
- device_type: Must be "pci"
- reg: A list of physical base address and length for each set of controller
registers. Must contain an entry for each entry in the reg-names property.
diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt
new file mode 100644
index 000000000000..ebd1e7d0403e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/versatile.txt
@@ -0,0 +1,59 @@
+* ARM Versatile Platform Baseboard PCI interface
+
+PCI host controller found on the ARM Versatile PB board's FPGA.
+
+Required properties:
+- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
+ controller.
+- reg: base addresses and lengths of the pci controller. There must be 3
+ entries:
+ - Versatile-specific registers
+ - Self Config space
+ - Config space
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- bus-range: set to <0 0xff>
+- ranges: ranges for the PCI memory and I/O regions
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties to define
+ the mapping of the PCI interface to interrupt numbers.
+
+Example:
+
+pci-controller@10001000 {
+ compatible = "arm,versatile-pci";
+ device_type = "pci";
+ reg = <0x10001000 0x1000
+ 0x41000000 0x10000
+ 0x42000000 0x100000>;
+ bus-range = <0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000 /* downstream I/O */
+ 0x02000000 0 0x50000000 0x50000000 0 0x10000000 /* non-prefetchable memory */
+ 0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+ interrupt-map-mask = <0x1800 0 0 7>;
+ interrupt-map = <0x1800 0 0 1 &sic 28
+ 0x1800 0 0 2 &sic 29
+ 0x1800 0 0 3 &sic 30
+ 0x1800 0 0 4 &sic 27
+
+ 0x1000 0 0 1 &sic 27
+ 0x1000 0 0 2 &sic 28
+ 0x1000 0 0 3 &sic 29
+ 0x1000 0 0 4 &sic 30
+
+ 0x0800 0 0 1 &sic 30
+ 0x0800 0 0 2 &sic 27
+ 0x0800 0 0 3 &sic 28
+ 0x0800 0 0 4 &sic 29
+
+ 0x0000 0 0 1 &sic 29
+ 0x0000 0 0 2 &sic 30
+ 0x0000 0 0 3 &sic 27
+ 0x0000 0 0 4 &sic 28>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
index 46a135dae6b3..89caa885d08c 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
@@ -26,6 +26,7 @@ Required properties (port (child) node):
filled in "reg". It can also contain the offset of the system configuration
registers used as glue-logic to setup the device for SATA/PCIe or USB3
devices.
+- st,syscfg : Offset of the parent configuration register.
- resets : phandle to the parent reset controller.
- reset-names : Associated name must be "miphy-sw-rst".
@@ -54,18 +55,12 @@ example:
phy_port0: port@9b22000 {
reg = <0x9b22000 0xff>,
<0x9b09000 0xff>,
- <0x9b04000 0xff>,
- <0x114 0x4>, /* sysctrl MiPHY cntrl */
- <0x818 0x4>, /* sysctrl MiPHY status*/
- <0xe0 0x4>, /* sysctrl PCIe */
- <0xec 0x4>; /* sysctrl SATA */
+ <0x9b04000 0xff>;
reg-names = "sata-up",
"pcie-up",
- "pipew",
- "miphy-ctrl-glue",
- "miphy-status-glue",
- "pcie-glue",
- "sata-glue";
+ "pipew";
+
+ st,syscfg = <0x114 0x818 0xe0 0xec>;
#phy-cells = <1>;
st,osc-rdy;
reset-names = "miphy-sw-rst";
@@ -75,18 +70,13 @@ example:
phy_port1: port@9b2a000 {
reg = <0x9b2a000 0xff>,
<0x9b19000 0xff>,
- <0x9b14000 0xff>,
- <0x118 0x4>,
- <0x81c 0x4>,
- <0xe4 0x4>,
- <0xf0 0x4>;
+ <0x9b14000 0xff>;
reg-names = "sata-up",
"pcie-up",
- "pipew",
- "miphy-ctrl-glue",
- "miphy-status-glue",
- "pcie-glue",
- "sata-glue";
+ "pipew";
+
+ st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
#phy-cells = <1>;
st,osc-force-ext;
reset-names = "miphy-sw-rst";
@@ -95,13 +85,12 @@ example:
phy_port2: port@8f95000 {
reg = <0x8f95000 0xff>,
- <0x8f90000 0xff>,
- <0x11c 0x4>,
- <0x820 0x4>;
+ <0x8f90000 0xff>;
reg-names = "pipew",
- "usb3-up",
- "miphy-ctrl-glue",
- "miphy-status-glue";
+ "usb3-up";
+
+ st,syscfg = <0x11c 0x820>;
+
#phy-cells = <1>;
reset-names = "miphy-sw-rst";
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
@@ -125,4 +114,4 @@ example:
Macro definitions for the supported miphy configuration can be found in:
-include/dt-bindings/phy/phy-miphy28lp.h
+include/dt-bindings/phy/phy.h
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
index 42c880886cf7..9802d5d911aa 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
@@ -6,8 +6,10 @@ for SATA and PCIe.
Required properties (controller (parent) node):
- compatible : Should be "st,miphy365x-phy"
-- st,syscfg : Should be a phandle of the system configuration register group
- which contain the SATA, PCIe mode setting bits
+- st,syscfg : Phandle / integer array property. Phandle of sysconfig group
+ containing the miphy registers and integer array should contain
+ an entry for each port sub-node, specifying the control
+ register offset inside the sysconfig group.
Required nodes : A sub-node is required for each channel the controller
provides. Address range information including the usual
@@ -26,7 +28,6 @@ Required properties (port (child) node):
registers filled in "reg":
- sata: For SATA devices
- pcie: For PCIe devices
- - syscfg: To specify the syscfg based config register
Optional properties (port (child) node):
- st,sata-gen : Generation of locally attached SATA IP. Expected values
@@ -39,20 +40,20 @@ Example:
miphy365x_phy: miphy365x@fe382000 {
compatible = "st,miphy365x-phy";
- st,syscfg = <&syscfg_rear>;
+ st,syscfg = <&syscfg_rear 0x824 0x828>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
phy_port0: port@fe382000 {
- reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
- reg-names = "sata", "pcie", "syscfg";
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+ reg-names = "sata", "pcie";
#phy-cells = <1>;
st,sata-gen = <3>;
};
phy_port1: port@fe38a000 {
- reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
reg-names = "sata", "pcie", "syscfg";
#phy-cells = <1>;
st,pcie-tx-pol-inv;
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index 1ef8228db73b..de6a706abcdb 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -5,10 +5,7 @@ host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC fa
Required properties:
- compatible : should be "st,stih407-usb2-phy"
-- reg : contain the offset and length of the system configuration registers
- used as glue logic to control & parameter phy
-- reg-names : the names of the system configuration registers in "reg", should be "param" and "reg"
-- st,syscfg : sysconfig register to manage phy parameter at driver level
+- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the whole phy and one for the port
- reset-names : list of reset signal names. Should be "global" and "port"
@@ -19,11 +16,8 @@ Example:
usb2_picophy0: usbpicophy@f8 {
compatible = "st,stih407-usb2-phy";
- reg = <0xf8 0x04>, /* syscfg 5062 */
- <0xf4 0x04>; /* syscfg 5061 */
- reg-names = "param", "ctrl";
#phy-cells = <0>;
- st,syscfg = <&syscfg_core>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 000000000000..826454ac43bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,37 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+ register files"
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes
+required properties:
+- #phy-cells: should be 0
+- reg: PHY configure reg address offset in GRF
+ "0x320" - for PHY attach to OTG controller
+ "0x334" - for PHY attach to HOST0 controller
+ "0x348" - for PHY attach to HOST1 controller
+
+Optional Properties:
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names: string, clock name, must be "phyclk"
+
+Example:
+
+usbphy: phy {
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x320>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index d5bad920827f..91e38cfe1f8f 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -3,8 +3,8 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
Required properties:
- compatible : should be "samsung,s5pv210-mipi-video-phy";
-- reg : offset and length of the MIPI DPHY register set;
- #phy-cells : from the generic phy bindings, must be 1;
+- syscon - phandle to the PMU system controller;
For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
the PHY specifier identifies the PHY and its meaning is as follows:
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 93ce12eb422a..fdd8046e650a 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -11,6 +11,7 @@ Required properties:
"allwinner,sun5i-a10s-pinctrl"
"allwinner,sun5i-a13-pinctrl"
"allwinner,sun6i-a31-pinctrl"
+ "allwinner,sun6i-a31s-pinctrl"
"allwinner,sun6i-a31-r-pinctrl"
"allwinner,sun7i-a20-pinctrl"
"allwinner,sun8i-a23-pinctrl"
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
index 189814e7cdc7..ecb5c0d25218 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
@@ -6,7 +6,8 @@ nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
a baseline, and only documents the differences between the two bindings.
Required properties:
-- compatible: "nvidia,tegra124-pinmux"
+- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For
+ Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
- reg: Should contain a list of base address and size pairs for:
-- first entry - the drive strength and pad control registers.
-- second entry - the pinmux registers
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
index 2f9c0bd66457..30676ded85bb 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -13,7 +13,9 @@ how to describe and reference PHYs in device trees.
Required properties:
--------------------
-- compatible: should be "nvidia,tegra124-xusb-padctl"
+- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
+ Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
+ "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
- reg: Physical base address and length of the controller's registers.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
new file mode 100644
index 000000000000..498caff6029e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
@@ -0,0 +1,186 @@
+Qualcomm MSM8916 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8916 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,msm8916-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio121,
+ sdc1_clk,
+ sdc1_cmd,
+ sdc1_data
+ sdc2_clk,
+ sdc2_cmd,
+ sdc2_data,
+ qdsd_cmd,
+ qdsd_data0,
+ qdsd_data1,
+ qdsd_data2,
+ qdsd_data3
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+ atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0,
+ atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en,
+ bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+ blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
+ blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3,
+ blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4,
+ blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2,
+ cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
+ display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us,
+ ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+ gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1,
+ gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en,
+ ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync,
+ pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
+ pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a,
+ pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b,
+ qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0,
+ qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1,
+ qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int,
+ ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm,
+ wcss_wlan, webcam1_rst
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <0 208 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart2: uart2-default {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ };
+
+ tx {
+ pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index daef6fad6a5f..bfe72ec055e3 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -1,7 +1,7 @@
* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH7372,
-SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller.
+The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
+R8A73A4 and R8A7740 it also acts as a GPIO controller.
Pin Control
@@ -10,13 +10,13 @@ Pin Control
Required Properties:
- compatible: should be one of the following.
+ - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
- "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
- "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
- "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
- "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
- - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
- "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
- reg: Base address and length of each memory resource used by the pin
@@ -75,8 +75,7 @@ bias-disable, bias-pull-up and bias-pull-down.
GPIO
----
-On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller
-node.
+On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
Required Properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 8425838a6dff..9d2a995293e6 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -171,6 +171,18 @@ Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
+Aliases for controllers compatible with "samsung,exynos7-pinctrl":
+- pinctrl0: pin controller of ALIVE block,
+- pinctrl1: pin controller of BUS0 block,
+- pinctrl2: pin controller of NFC block,
+- pinctrl3: pin controller of TOUCH block,
+- pinctrl4: pin controller of FF block,
+- pinctrl5: pin controller of ESE block,
+- pinctrl6: pin controller of FSYS0 block,
+- pinctrl7: pin controller of FSYS1 block,
+- pinctrl8: pin controller of BUS1 block,
+- pinctrl9: pin controller of AUDIO block,
+
Example: A pin-controller node with pin banks:
pinctrl_0: pinctrl@11400000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
index 6b33b9f18e88..f63fcb3ed352 100644
--- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -16,17 +16,22 @@ mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as input, output, pull up, pull down...
The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
+and processed purely based on their content. The subnodes use the generic
+pin multiplexing node layout from the standard pin control bindings
+(see pinctrl-bindings.txt):
-Required subnode-properties:
-- ste,pins : An array of strings. Each string contains the name of a pin or
- group.
-
-Optional subnode-properties:
-- ste,function: A string containing the name of the function to mux to the
+Required pin multiplexing subnode properties:
+- function: A string containing the name of the function to mux to the
pin or group.
+- groups : An array of strings. Each string contains the name of a pin
+ group that will be combined with the function to form a multiplexing
+ set-up.
-- ste,config: Handle of pin configuration node (e.g. ste,config = <&slpm_in_wkup_pdis>)
+Required pin configuration subnode properties:
+- pins: A string array describing the pins affected by the configuration
+ in the node.
+- ste,config: Handle of pin configuration node
+ (e.g. ste,config = <&slpm_in_wkup_pdis>)
- ste,input : <0/1/2>
0: input with no pull
@@ -97,32 +102,32 @@ Example board file extract:
uart0 {
uart0_default_mux: uart0_mux {
u0_default_mux {
- ste,function = "u0";
- ste,pins = "u0_a_1";
+ function = "u0";
+ pins = "u0_a_1";
};
};
uart0_default_mode: uart0_default {
uart0_default_cfg1 {
- ste,pins = "GPIO0", "GPIO2";
+ pins = "GPIO0", "GPIO2";
ste,input = <1>;
};
uart0_default_cfg2 {
- ste,pins = "GPIO1", "GPIO3";
+ pins = "GPIO1", "GPIO3";
ste,output = <1>;
};
};
uart0_sleep_mode: uart0_sleep {
uart0_sleep_cfg1 {
- ste,pins = "GPIO0", "GPIO2";
+ pins = "GPIO0", "GPIO2";
ste,config = <&slpm_in_wkup_pdis>;
};
uart0_sleep_cfg2 {
- ste,pins = "GPIO1";
+ pins = "GPIO1";
ste,config = <&slpm_out_hi_wkup_pdis>;
};
uart0_sleep_cfg3 {
- ste,pins = "GPIO3";
+ pins = "GPIO3";
ste,config = <&slpm_out_wkup_pdis>;
};
};
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
new file mode 100644
index 000000000000..b7b55a964f65
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -0,0 +1,104 @@
+ Binding for Xilinx Zynq Pinctrl
+
+Required properties:
+- compatible: "xlnx,zynq-pinctrl"
+- syscon: phandle to SLCR
+- reg: Offset and length of pinctrl space in SLCR
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Zynq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+Each configuration node can consist of multiple nodes describing the pinmux and
+pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required properties for pinmux nodes are:
+ - groups: A list of pinmux groups.
+ - function: The name of a pinmux function to activate for the specified set
+ of groups.
+
+Required properties for configuration nodes:
+One of:
+ - pins: a list of pin names
+ - groups: A list of pinmux groups.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+ groups, function
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+ groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
+ low-power-disable, low-power-enable
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
+ respectively.
+
+ Valid values for groups are:
+ ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
+ qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
+ spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+ sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+ sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
+ can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
+ uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
+ ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
+ gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
+
+ Valid values for pins are:
+ MIO0 - MIO53
+
+ Valid values for function are:
+ ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
+ spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+ sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+ smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
+ i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
+
+The following driver-specific properties as defined here are valid to specify in
+a pin configuration subnode:
+ - io-standard: Configure the pin to use the selected IO standard according to
+ this mapping:
+ 1: LVCMOS18
+ 2: LVCMOS25
+ 3: LVCMOS33
+ 4: HSTL
+
+Example:
+ pinctrl0: pinctrl@700 {
+ compatible = "xlnx,pinctrl-zynq";
+ reg = <0x700 0x200>;
+ syscon = <&slcr>;
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/ltc2941.txt b/Documentation/devicetree/bindings/power/ltc2941.txt
new file mode 100644
index 000000000000..ea42ae12d924
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/ltc2941.txt
@@ -0,0 +1,27 @@
+binding for LTC2941 and LTC2943 battery gauges
+
+Both the LTC2941 and LTC2943 measure battery capacity.
+The LTC2943 is compatible with the LTC2941, it adds voltage and
+temperature monitoring, and uses a slightly different conversion
+formula for the charge counter.
+
+Required properties:
+- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
+ type of I2C chip attached.
+- reg: The 7-bit I2C address.
+- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
+ negative value when the battery has been connected to the wrong end of the
+ resistor.
+- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
+ This determines the range and accuracy of the gauge. The value is programmed
+ into the chip only if it differs from the current setting. The setting is
+ lost when the battery is disconnected.
+
+Example from the Topic Miami Florida board:
+
+ fuelgauge: ltc2943@64 {
+ compatible = "ltc2943";
+ reg = <0x64>;
+ lltc,resistor-sense = <15>;
+ lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
index 0c94c637f63b..cd2d7f58a9d7 100644
--- a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -1,20 +1,23 @@
Binding for the LTC2952 PowerPath controller
This chip is used to externally trigger a system shut down. Once the trigger has
-been sent, the chips' watchdog has to be reset to gracefully shut down.
-If the Linux systems decides to shut down it powers off the platform via the
-kill signal.
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
Required properties:
- compatible: Must contain: "lltc,ltc2952"
-- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
- chip's trigger line
- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the
chip's watchdog line
- kill-gpios: phandle + gpio-specifier for the GPIO connected to the
chip's kill line
+Optional properties:
+- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
+ chip's trigger line. If this property is not set, the
+ trigger function is ignored and the chip is kept alive
+ until an explicit kill signal is received
+
Example:
ltc2952 {
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 6fbf6e7ecde6..8b70db103ca7 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the the relevant regulator. All specified supplies must be able
+a phandle the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index edeea160ca39..edda55f74004 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -7,6 +7,7 @@ CONTENTS
- FMan MURAM Node
- FMan dTSEC/XGEC/mEMAC Node
- FMan IEEE 1588 Node
+ - FMan MDIO Node
- Example
=============================================================================
@@ -357,6 +358,69 @@ ptp-timer@fe000 {
};
=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: A standard property.
+ Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+ FMan v3.
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+
+- bus-frequency
+ Usage: optional
+ Value type: <u32>
+ Definition: Specifies the external MDIO bus clock speed to
+ be used, if different from the standard 2.5 MHz.
+ This may be due to the standard speed being unsupported (e.g.
+ due to a hardware problem), or to advertise that all relevant
+ components in the system support a faster speed.
+
+- interrupts
+ Usage: required for external MDIO
+ Value type: <prop-encoded-array>
+ Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+ Usage: required for internal MDIO
+ Value type: boolean
+ Definition: Fman has internal MDIO for internal PCS(Physical
+ Coding Sublayer) PHYs and external MDIO for external PHYs.
+ The settings and programming routines for internal/external
+ MDIO are different. Must be included for internal MDIO.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0xf1000 0x1000>;
+ fsl,fman-internal-mdio;
+};
+
+=============================================================================
Example
fman@400000 {
@@ -531,4 +595,10 @@ fman@400000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
+
+ mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
index 3300fec501c5..1c80fcedebb5 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
@@ -16,20 +16,28 @@ Example:
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <f0010100 40>;
+ reg = <0xf0010100 0x40>;
- ranges = <0 0 fe000000 02000000
- 1 0 f4500000 00008000>;
+ ranges = <0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0xf4500000 0x00008000
+ 0x2 0x0 0xfd810000 0x00010000>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 2000000>;
+ reg = <0x0 0x0 0x2000000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
- reg = <1 0 20>;
+ reg = <0x1 0x0 0x20>;
compatible = "fsl,mpc8272ads-bcsr";
};
+
+ simple-periph@2,0 {
+ compatible = "fsl,elbc-gpcm-uio";
+ reg = <0x2 0x0 0x10000>;
+ elbc-gpcm-br = <0xfd810800>;
+ elbc-gpcm-or = <0xffff09f7>;
+ };
};
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index c7ea9d4a988b..c52f03b5032f 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -1,9 +1,10 @@
Tegra SoC PWFM controller
Required properties:
-- compatible: should be one of:
- - "nvidia,tegra20-pwm"
- - "nvidia,tegra30-pwm"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pwm". For Tegra30,
+ must contain "nvidia,tegra30-pwm". Otherwise, must contain
+ "nvidia,<chip>-pwm", plus one of the above, where <chip> is tegra114,
+ tegra124, tegra132, or tegra210.
- reg: physical base address and length of the controller's registers
- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
the cells format.
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index 240019a82f9a..eb618907c7de 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -11,6 +11,7 @@ Required properties:
BUCKA and BUCKB.
Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
- Any optional property defined in regulator.txt
Example 1) DA9211
@@ -27,6 +28,7 @@ Example 1) DA9211
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
@@ -34,11 +36,12 @@ Example 1) DA9211
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 17 0>;
};
};
};
-Example 2) DA92113
+Example 2) DA9213
pmic: da9213@68 {
compatible = "dlg,da9213";
reg = <0x68>;
@@ -51,6 +54,7 @@ Example 2) DA92113
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <6000000>;
+ enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
@@ -58,6 +62,7 @@ Example 2) DA92113
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <6000000>;
+ enable-gpios = <&gpio 17 0>;
};
};
};
diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt
index a626fc1bbf0d..d6e7c9ec9413 100644
--- a/Documentation/devicetree/bindings/regulator/isl9305.txt
+++ b/Documentation/devicetree/bindings/regulator/isl9305.txt
@@ -2,7 +2,7 @@ Intersil ISL9305/ISL9305H voltage regulator
Required properties:
-- compatible: "isl,isl9305" or "isl,isl9305h"
+- compatible: "isil,isl9305" or "isil,isl9305h"
- reg: I2C slave address, usually 0x68.
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
@@ -19,7 +19,7 @@ Optional properties:
Example
pmic: isl9305@68 {
- compatible = "isl,isl9305";
+ compatible = "isil,isl9305";
reg = <0x68>;
VINDCD1-supply = <&system_power>;
diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
new file mode 100644
index 000000000000..a42b1d6e9863
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
@@ -0,0 +1,217 @@
+Mediatek MT6397 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6397-regulator"
+- mt6397regulator: List of regulators provided by this controller. It is named
+ according to its regulator type, buck_<name> and ldo_<name>.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
+ buck_vdrm, buck_vio18
+LDO:
+ ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
+ ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
+ ldo_vibr
+
+Example:
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <200>;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2120000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_usb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ /* fixed output 3.3 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ egulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 34ef5d16d0f1..9b40db88f637 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -1,7 +1,7 @@
PFUZE100 family of regulators
Required properties:
-- compatible: "fsl,pfuze100" or "fsl,pfuze200"
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
- reg: I2C slave address
Required child node:
@@ -14,6 +14,8 @@ Required child node:
sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
--PFUZE200
sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+ --PFUZE3000
+ sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
Each regulator is defined using the standard binding for regulators.
@@ -205,3 +207,93 @@ Example 2: PFUZE200
};
};
};
+
+Example 3: PFUZE3000
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
new file mode 100644
index 000000000000..2eb9d4ee7dc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
@@ -0,0 +1,22 @@
+* Real Time Clock of the Armada 38x SoCs
+
+RTC controller for the Armada 38x SoCs
+
+Required properties:
+- compatible : Should be "marvell,armada-380-rtc"
+- reg: a list of base address and size pairs, one for each entry in
+ reg-names
+- reg names: should contain:
+ * "rtc" for the RTC registers
+ * "rtc-soc" for the SoC related registers and among them the one
+ related to the interrupt.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@a3800 {
+ compatible = "marvell,armada-380-rtc";
+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
new file mode 100644
index 000000000000..501c39ceae79
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -0,0 +1,78 @@
+Intersil ISL12057 I2C RTC/Alarm chip
+
+ISL12057 is a trivial I2C device (it has simple device tree bindings,
+consisting of a compatible field, an address and possibly an interrupt
+line).
+
+Nonetheless, it also supports an option boolean property
+("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
+and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
+(associated with the alarm supported by the driver) is not connected
+to the SoC but to a PMIC. It allows the device to be powered up when
+RTC alarm rings. In order to mark the device has a wakeup source and
+get access to the 'wakealarm' sysfs entry, this specific property can
+be set when the IRQ#2 pin of the chip is not connected to the SoC but
+can wake up the device.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12057"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
+ independently of the availability of an IRQ line connected to the
+ SoC.
+
+ - "interrupt-parent", "interrupts": for passing the interrupt line
+ of the SoC connected to IRQ#2 of the RTC chip.
+
+
+Example isl12057 node without IRQ#2 pin connected (no alarm support):
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ };
+
+
+Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
+that the pinctrl-related properties below are given for completeness and
+may not be required or may be different depending on your system or
+SoC, and the main function of the MPP used as IRQ line, i.e.
+"interrupt-parent" and "interrupts" are usually sufficient):
+
+ pinctrl {
+ ...
+
+ rtc_alarm_pin: rtc_alarm_pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ ...
+
+ };
+
+ ...
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ pinctrl-0 = <&rtc_alarm_pin>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+
+Example isl12057 node without IRQ#2 pin connected to the SoC but to a
+PMIC, allowing the device to be started based on configured alarm:
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
index 652d1ff2e8be..b7d98ed3e098 100644
--- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -6,7 +6,9 @@ state.
Required properties:
-- compatible : should be "nvidia,tegra20-rtc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-rtc". Otherwise,
+ must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
+ can be tegra30, tegra114, tegra124, or tegra132.
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
- clocks : Must contain one entry, for the module clock.
diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
new file mode 100644
index 000000000000..5cbc0b145a61
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
@@ -0,0 +1,16 @@
+NXP PCF2123 SPI Real Time Clock
+
+Required properties:
+- compatible: should be: "nxp,rtc-pcf2123"
+- reg: should be the SPI slave chipselect address
+
+Optional properties:
+- spi-cs-high: PCF2123 needs chipselect high
+
+Example:
+
+rtc: nxp,rtc-pcf2123@3 {
+ compatible = "nxp,rtc-pcf2123"
+ reg = <3>
+ spi-cs-high;
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
new file mode 100644
index 000000000000..3ad115efed1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+
+Optional ST33ZP24 Properties:
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ st33zp24: st33zp24@13 {
+
+ compatible = "st,st33zp24-i2c";
+
+ reg = <0x13>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
new file mode 100644
index 000000000000..2d3ede66889d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+ See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+ aliases {
+ serial0 = &uart0;
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ reg = <0xf0000740 0x20>;
+ clocks = <&main_clk>;
+ interrupts = <44>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt
index b52b98234b9b..bea60ef6cdc5 100644
--- a/Documentation/devicetree/bindings/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/serial/of-serial.txt
@@ -8,7 +8,10 @@ Required properties:
- "ns16550"
- "ns16750"
- "ns16850"
- - "nvidia,tegra20-uart"
+ - For Tegra20, must contain "nvidia,tegra20-uart"
+ - For other Tegra, must contain '"nvidia,<chip>-uart",
+ "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
+ tegra132, or tegra210.
- "nxp,lpc3220-uart"
- "ralink,rt2880-uart"
- "ibm,qpace-nwp-serial"
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
index 3acdd969edf1..f0c39261c5d4 100644
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt
@@ -2,7 +2,7 @@
Required properties:
- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
- "sirf,marco-uart" or "sirf,marco-bt-uart" which means
+ "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means
uart located in BT module and used for BT.
- reg : Offset and length of the register set for the device
- interrupts : Should contain uart interrupt
@@ -37,7 +37,7 @@ usp@b0090000 {
for uart use in BT module,
uart6: uart@11000000 {
cell-index = <6>;
- compatible = "sirf,marco-bt-uart", "sirf,marco-uart";
+ compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart";
reg = <0x11000000 0x1000>;
interrupts = <0 100 0>;
clocks = <&clks 138>, <&clks 140>, <&clks 141>;
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 000000000000..2aff0f22c9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
new file mode 100644
index 000000000000..362a76925bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
@@ -0,0 +1,23 @@
+* Device tree bindings for Allwinner A10, A20 PS2 host controller
+
+A20 PS2 is dual role controller (PS2 host and PS2 device). These bindings are
+for PS2 A10/A20 host controller. IBM compliant IBM PS2 and AT-compatible keyboard
+and mouse can be connected.
+
+Required properties:
+
+ - reg : Offset and length of the register set for the device.
+ - compatible : Should be as of the following:
+ - "allwinner,sun4i-a10-ps2"
+ - interrupts : The interrupt line connected to the PS2.
+ - clocks : The gate clk connected to the PS2.
+
+
+Example:
+ ps20: ps2@0x01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <0 62 4>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
index 9f80bf8709ac..47ac834414d8 100644
--- a/Documentation/devicetree/bindings/soc/fsl/bman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -36,6 +36,11 @@ are located at offsets 0xbf8 and 0xbfc
Value type: <prop-encoded-array>
Definition: Standard property. The error interrupt
+- fsl,bman-portals
+ Usage: Required
+ Value type: <phandle>
+ Definition: Phandle to this BMan instance's portals
+
- fsl,liodn
Usage: See pamu.txt
Value type: <prop-encoded-array>
@@ -96,7 +101,7 @@ The example below shows a BMan FBPR dynamic allocation memory node
bman_fbpr: bman-fbpr {
compatible = "fsl,bman-fbpr";
- alloc-ranges = <0 0 0xf 0xffffffff>;
+ alloc-ranges = <0 0 0x10 0>;
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
@@ -104,6 +109,10 @@ The example below shows a BMan FBPR dynamic allocation memory node
The example below shows a (P4080) BMan CCSR-space node
+ bportals: bman-portals@ff4000000 {
+ ...
+ };
+
crypto@300000 {
...
fsl,bman = <&bman, 2>;
@@ -115,6 +124,7 @@ The example below shows a (P4080) BMan CCSR-space node
reg = <0x31a000 0x1000>;
interrupts = <16 2 1 2>;
fsl,liodn = <0x17>;
+ fsl,bman-portals = <&bportals>;
memory-region = <&bman_fbpr>;
};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
index 063e3a0b9d04..556ebb8be75d 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -38,6 +38,11 @@ are located at offsets 0xbf8 and 0xbfc
Value type: <prop-encoded-array>
Definition: Standard property. The error interrupt
+- fsl,qman-portals
+ Usage: Required
+ Value type: <phandle>
+ Definition: Phandle to this QMan instance's portals
+
- fsl,liodn
Usage: See pamu.txt
Value type: <prop-encoded-array>
@@ -113,13 +118,13 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
qman_fqd: qman-fqd {
compatible = "fsl,qman-fqd";
- alloc-ranges = <0 0 0xf 0xffffffff>;
+ alloc-ranges = <0 0 0x10 0>;
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
compatible = "fsl,qman-pfdr";
- alloc-ranges = <0 0 0xf 0xffffffff>;
+ alloc-ranges = <0 0 0x10 0>;
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
@@ -127,6 +132,10 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
The example below shows a (P4080) QMan CCSR-space node
+ qportals: qman-portals@ff4200000 {
+ ...
+ };
+
clockgen: global-utilities@e1000 {
...
sysclk: sysclk {
@@ -154,6 +163,7 @@ The example below shows a (P4080) QMan CCSR-space node
reg = <0x318000 0x1000>;
interrupts = <16 2 1 3>
fsl,liodn = <0x16>;
+ fsl,qman-portals = <&qportals>;
memory-region = <&qman_fqd &qman_pfdr>;
clocks = <&platform_pll 1>;
};
diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
new file mode 100644
index 000000000000..befd125d18bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
@@ -0,0 +1,18 @@
+Bindings for I2S controller built into xtfpga Xtensa bitstreams.
+
+Required properties:
+- compatible: shall be "cdns,xtfpga-i2s".
+- reg: memory region (address and length) with device registers.
+- interrupts: interrupt for the device.
+- clocks: phandle to the clk used as master clock. I2S bus clock
+ is derived from it.
+
+Examples:
+
+ i2s0: xtfpga-i2s@0d080000 {
+ #sound-dai-cells = <0>;
+ compatible = "cdns,xtfpga-i2s";
+ reg = <0x0d080000 0x40>;
+ interrupts = <2 1>;
+ clocks = <&cdce706 4>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
new file mode 100644
index 000000000000..7bb54247f8e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
@@ -0,0 +1,31 @@
+DesignWare I2S controller
+
+Required properties:
+ - compatible : Must be "snps,designware-i2s"
+ - reg : Must contain the I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's
+ clocks. The controller expects one clock: the clock used as the sampling
+ rate reference clock sample.
+ - clock-names : "i2sclk" for the sample rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+ the core. The core expects one or two dma channels: one for transmit and
+ one for receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
+properties please check:
+ * resource-names.txt
+ * clock/clock-bindings.txt
+ * dma/dma.txt
+
+Example:
+
+ soc_i2s: i2s@7ff90000 {
+ compatible = "snps,designware-i2s";
+ reg = <0x0 0x7ff90000 0x0 0x1000>;
+ clocks = <&scpi_i2sclk 0>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 5>;
+ dma-names = "tx";
+ };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
new file mode 100644
index 000000000000..b41433386e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
@@ -0,0 +1,23 @@
+Ingenic JZ4740 I2S controller
+
+Required properties:
+- compatible : "ingenic,jz4740-i2s"
+- reg : I2S registers location and length
+- clocks : AIC and I2S PLL clock specifiers.
+- clock-names: "aic" and "i2s"
+- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
+- dma-names: Must be "tx" and "rx"
+
+Example:
+
+i2s: i2s@10020000 {
+ compatible = "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x94>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
+ clock-names = "aic", "i2s";
+
+ dmas = <&dma 2>, <&dma 3>;
+ dma-names = "tx", "rx";
+
+};
diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt
new file mode 100644
index 000000000000..a7a149a236e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98357a.txt
@@ -0,0 +1,14 @@
+Maxim MAX98357A audio DAC
+
+This node models the Maxim MAX98357A DAC.
+
+Required properties:
+- compatible : "maxim,max98357a"
+- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin
+
+Example:
+
+max98357a {
+ compatible = "maxim,max98357a";
+ sdmode-gpios = <&qcom_pinmux 25 0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
new file mode 100644
index 000000000000..a4589cda214e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
@@ -0,0 +1,67 @@
+NVIDIA Tegra audio complex, with RT5677 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-rt5677"
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources and
+ sinks are the RT5677's pins (as documented in its binding), and the jacks
+ on the board:
+
+ * Headphone
+ * Speaker
+ * Headset Mic
+ * Internal Mic 1
+ * Internal Mic 2
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+ connected to the CODEC.
+- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
+ assumes that AIF1 on the CODEC is connected to Tegra.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
+- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
+- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
+- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
+
+Example:
+
+sound {
+ compatible = "nvidia,tegra-audio-rt5677-ryu",
+ "nvidia,tegra-audio-rt5677";
+ nvidia,model = "NVIDIA Tegra Ryu";
+
+ nvidia,audio-routing =
+ "Headphone", "LOUT2",
+ "Headphone", "LOUT1",
+ "Headset Mic", "MICBIAS1",
+ "IN1P", "Headset Mic",
+ "IN1N", "Headset Mic",
+ "DMIC L1", "Internal Mic 1",
+ "DMIC R1", "Internal Mic 1",
+ "DMIC L2", "Internal Mic 2",
+ "DMIC R2", "Internal Mic 2",
+ "Speaker", "PDM1L",
+ "Speaker", "PDM1R";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5677>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+ nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
+ nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 946e2ac46091..0e9a1895d7fb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -1,7 +1,10 @@
NVIDIA Tegra30 AHUB (Audio Hub)
Required properties:
-- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
+- compatible : For Tegra30, must contain "nvidia,tegra30-ahub". For Tegra114,
+ must contain "nvidia,tegra114-ahub". For Tegra124, must contain
+ "nvidia,tegra124-ahub". Otherwise, must contain "nvidia,<chip>-ahub",
+ plus at least one of the above, where <chip> is tegra132.
- reg : Should contain the register physical address and length for each of
the AHUB's register blocks.
- Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
index b4730c2822bc..13e2ef496724 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
@@ -1,7 +1,9 @@
NVIDIA Tegra30 HDA controller
Required properties:
-- compatible : "nvidia,tegra30-hda"
+- compatible : For Tegra30, must contain "nvidia,tegra30-hda". Otherwise,
+ must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is
+ tegra114, tegra124, or tegra132.
- reg : Should contain the HDA registers location and length.
- interrupts : The interrupt from the HDA controller.
- clocks : Must contain an entry for each required entry in clock-names.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
index 0c113ffe3814..38caa936f6f8 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -1,7 +1,10 @@
NVIDIA Tegra30 I2S controller
Required properties:
-- compatible : "nvidia,tegra30-i2s"
+- compatible : For Tegra30, must contain "nvidia,tegra30-i2s". For Tegra124,
+ must contain "nvidia,tegra124-i2s". Otherwise, must contain
+ "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
+ tegra114 or tegra132.
- reg : Should contain I2S registers location and length
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
diff --git a/Documentation/devicetree/bindings/sound/pcm512x.txt b/Documentation/devicetree/bindings/sound/pcm512x.txt
index faff75e64573..3aae3b41bd8e 100644
--- a/Documentation/devicetree/bindings/sound/pcm512x.txt
+++ b/Documentation/devicetree/bindings/sound/pcm512x.txt
@@ -5,7 +5,8 @@ on the board).
Required properties:
- - compatible : One of "ti,pcm5121" or "ti,pcm5122"
+ - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141" or
+ "ti,pcm5142"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
@@ -16,9 +17,16 @@ Required properties:
Optional properties:
- clocks : A clock specifier for the clock connected as SCLK. If this
- is absent the device will be configured to clock from BCLK.
+ is absent the device will be configured to clock from BCLK. If pll-in
+ and pll-out are specified in addition to a clock, the device is
+ configured to accept clock input on a specified gpio pin.
-Example:
+ - pll-in, pll-out : gpio pins used to connect the pll using <1>
+ through <6>. The device will be configured for clock input on the
+ given pll-in pin and PLL output on the given pll-out pin. An
+ external connection from the pll-out pin to the SCLK pin is assumed.
+
+Examples:
pcm5122: pcm5122@4c {
compatible = "ti,pcm5122";
@@ -28,3 +36,17 @@ Example:
DVDD-supply = <&reg_1v8>;
CPVDD-supply = <&reg_3v3>;
};
+
+
+ pcm5142: pcm5142@4c {
+ compatible = "ti,pcm5142";
+ reg = <0x4c>;
+
+ AVDD-supply = <&reg_3v3_analog>;
+ DVDD-supply = <&reg_1v8>;
+ CPVDD-supply = <&reg_3v3>;
+
+ clocks = <&sck>;
+ pll-in = <3>;
+ pll-out = <6>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index d188296bb6ec..09e0e18591ae 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -33,6 +33,25 @@ Required SoC Specific Properties:
"iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root
clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2
doesn't have any such mux.
+- #clock-cells: should be 1, this property must be present if the I2S device
+ is a clock provider in terms of the common clock bindings, described in
+ ../clock/clock-bindings.txt.
+- clock-output-names: from the common clock bindings, names of the CDCLK
+ I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1",
+ "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices recpectively.
+
+There are following clocks available at the I2S device nodes:
+ CLK_I2S_CDCLK - the CDCLK (CODECLKO) gate clock,
+ CLK_I2S_RCLK_PSR - the RCLK prescaler divider clock (corresponding to the
+ IISPSR register),
+ CLK_I2S_RCLK_SRC - the RCLKSRC mux clock (corresponding to RCLKSRC bit in
+ IISMOD register).
+
+Refer to the SoC datasheet for availability of the above clocks.
+The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available
+in the IIS Multi Audio Interface (I2S0).
+Note: Old DTs may not have the #clock-cells, clock-output-names properties
+and then not use the I2S node as a clock supplier.
Optional SoC Specific Properties:
@@ -41,6 +60,7 @@ Optional SoC Specific Properties:
- pinctrl-0: Should specify pin control groups used for this controller.
- pinctrl-names: Should contain only one value - "default".
+
Example:
i2s0: i2s@03830000 {
@@ -54,6 +74,8 @@ i2s0: i2s@03830000 {
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ #clock-cells;
+ clock-output-names = "i2s_cdclk0";
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index c3cba600bf11..73bf314f7240 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -75,6 +75,11 @@ Optional CPU/CODEC subnodes properties:
it can be specified via "clocks" if system has
clock node (= common clock), or "system-clock-frequency"
(if system doens't support common clock)
+ If a clock is specified, it is
+ enabled with clk_prepare_enable()
+ in dai startup() and disabled with
+ clk_disable_unprepare() in dai
+ shutdown().
Example 1 - single DAI link:
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt
new file mode 100644
index 000000000000..255de3ae5b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -0,0 +1,92 @@
+STA32X audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+ - compatible: "st,sta32x"
+ - reg: the I2C address of the device for I2C
+ - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+ deasserted before communication to the codec starts.
+
+ - power-down-gpios: a GPIO spec for the power down pin. If specified,
+ it will be deasserted before communication to the codec
+ starts.
+
+ - Vdda-supply: regulator spec, providing 3.3V
+ - Vdd3-supply: regulator spec, providing 3.3V
+ - Vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+ - st,output-conf: number, Selects the output configuration:
+ 0: 2-channel (full-bridge) power, 2-channel data-out
+ 1: 2 (half-bridge). 1 (full-bridge) on-board power
+ 2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+ 3: 1 Channel Mono-Parallel
+ If parameter is missing, mode 0 will be enabled.
+ This property has to be specified as '/bits/ 8' value.
+
+ - st,ch1-output-mapping: Channel 1 output mapping
+ - st,ch2-output-mapping: Channel 2 output mapping
+ - st,ch3-output-mapping: Channel 3 output mapping
+ 0: Channel 1
+ 1: Channel 2
+ 2: Channel 3
+ If parameter is missing, channel 1 is chosen.
+ This properties have to be specified as '/bits/ 8' values.
+
+ - st,thermal-warning-recover:
+ If present, thermal warning recovery is enabled.
+
+ - st,thermal-warning-adjustment:
+ If present, thermal warning adjustment is enabled.
+
+ - st,fault-detect-recovery:
+ If present, then fault recovery will be enabled.
+
+ - st,drop-compensation-ns: number
+ Only required for "st,ffx-power-output-mode" ==
+ "variable-drop-compensation".
+ Specifies the drop compensation in nanoseconds.
+ The value must be in the range of 0..300, and only
+ multiples of 20 are allowed. Default is 140ns.
+
+ - st,max-power-use-mpcc:
+ If present, then MPCC bits are used for MPC coefficients,
+ otherwise standard MPC coefficients are used.
+
+ - st,max-power-corr:
+ If present, power bridge correction for THD reduction near maximum
+ power output is enabled.
+
+ - st,am-reduction-mode:
+ If present, FFX mode runs in AM reduction mode, otherwise normal
+ FFX mode is used.
+
+ - st,odd-pwm-speed-mode:
+ If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+ channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+ - st,invalid-input-detect-mute:
+ If present, automatic invalid input detect mute is enabled.
+
+Example:
+
+codec: sta32x@38 {
+ compatible = "st,sta32x";
+ reg = <0x1c>;
+ reset-gpios = <&gpio1 19 0>;
+ power-down-gpios = <&gpio1 16 0>;
+ st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel
+ // (full-bridge) power,
+ // 2-channel data-out
+ st,ch1-output-mapping = /bits/ 8 <0>; // set channel 1 output ch 1
+ st,ch2-output-mapping = /bits/ 8 <0>; // set channel 2 output ch 1
+ st,ch3-output-mapping = /bits/ 8 <0>; // set channel 3 output ch 1
+ st,max-power-correction; // enables power bridge
+ // correction for THD reduction
+ // near maximum power output
+ st,invalid-input-detect-mute; // mute if no valid digital
+ // audio signal is provided.
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index 5e6040c2c2e9..47a213c411ce 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -9,6 +9,7 @@ Required properties:
"ti,tlv320aic33" - TLV320AIC33
"ti,tlv320aic3007" - TLV320AIC3007
"ti,tlv320aic3106" - TLV320AIC3106
+ "ti,tlv320aic3104" - TLV320AIC3104
- reg - <int> - I2C slave address
@@ -18,6 +19,7 @@ Optional properties:
- gpio-reset - gpio pin number used for codec reset
- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+ - Not supported on tlv320aic3104
- ai3x-micbias-vg - MicBias Voltage required.
1 - MICBIAS output is powered to 2.0V,
2 - MICBIAS output is powered to 2.5V,
@@ -36,7 +38,13 @@ CODEC output pins:
* HPLCOM
* HPRCOM
-CODEC input pins:
+CODEC input pins for TLV320AIC3104:
+ * MIC2L
+ * MIC2R
+ * LINE1L
+ * LINE1R
+
+CODEC input pins for other compatible codecs:
* MIC3L
* MIC3R
* LINE1L
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
index e8bf23eb1803..a836881d9608 100644
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt
@@ -13,6 +13,11 @@ Required properties:
- interrupt-parent: The parent interrupt controller
- interrupts: Interrupt number for /INT pin from the 227e
+Optional properies:
+ - ti,micbias: Intended MICBIAS voltage (datasheet section 9.6.7).
+ Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
+ 2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
+ Default value is "1" (2.2V).
Examples:
diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt
index e99f4097c83c..66bf261423b9 100644
--- a/Documentation/devicetree/bindings/sound/wm8904.txt
+++ b/Documentation/devicetree/bindings/sound/wm8904.txt
@@ -3,7 +3,7 @@ WM8904 audio CODEC
This device supports I2C only.
Required properties:
- - compatible: "wlf,wm8904"
+ - compatible: "wlf,wm8904" or "wlf,wm8912"
- reg: the I2C address of the device.
- clock-names: "mclk"
- clocks: reference to
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 7ea701e07dc2..b785976fe98a 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -1,7 +1,9 @@
NVIDIA Tegra114 SPI controller.
Required properties:
-- compatible : should be "nvidia,tegra114-spi".
+- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
+ Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
+ <chip> is tegra124, tegra132, or tegra210.
- reg: Should contain SPI registers location and length.
- interrupts: Should contain SPI interrupts.
- clock-names : Must include the following entries:
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index d11c3721e7cd..4c388bb2f0a2 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -30,6 +30,22 @@ Optional properties:
specifiers, one for transmission, and one for
reception.
- dma-names : Must contain a list of two DMA names, "tx" and "rx".
+- renesas,dtdl : delay sync signal (setup) in transmit mode.
+ Must contain one of the following values:
+ 0 (no bit delay)
+ 50 (0.5-clock-cycle delay)
+ 100 (1-clock-cycle delay)
+ 150 (1.5-clock-cycle delay)
+ 200 (2-clock-cycle delay)
+
+- renesas,syncdl : delay sync signal (hold) in transmit mode.
+ Must contain one of the following values:
+ 0 (no bit delay)
+ 50 (0.5-clock-cycle delay)
+ 100 (1-clock-cycle delay)
+ 150 (1.5-clock-cycle delay)
+ 200 (2-clock-cycle delay)
+ 300 (3-clock-cycle delay)
Optional properties, deprecated for soctype-specific bindings:
- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
diff --git a/Documentation/devicetree/bindings/spi/spi-sirf.txt b/Documentation/devicetree/bindings/spi/spi-sirf.txt
new file mode 100644
index 000000000000..4c7adb8f777c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sirf.txt
@@ -0,0 +1,41 @@
+* CSR SiRFprimaII Serial Peripheral Interface
+
+Required properties:
+- compatible : Should be "sirf,prima2-spi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI interrupt
+- resets: phandle to the reset controller asserting this device in
+ reset
+ See ../reset/reset.txt for details.
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+
+- #address-cells: Number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+ Units - Hz. Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+- cs-gpios: should specify GPIOs used for chipselects.
+
+Example:
+
+spi0: spi@b00d0000 {
+ compatible = "sirf,prima2-spi";
+ reg = <0xb00d0000 0x10000>;
+ interrupts = <15>;
+ dmas = <&dmac1 9>,
+ <&dmac1 4>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clks 19>;
+ resets = <&rstc 26>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
new file mode 100644
index 000000000000..fe54959ec957
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
@@ -0,0 +1,40 @@
+STMicroelectronics SSC (SPI) Controller
+---------------------------------------
+
+Required properties:
+- compatible : "st,comms-ssc4-spi"
+- reg : Offset and length of the device's register set
+- interrupts : The interrupt specifier
+- clock-names : Must contain "ssc"
+- clocks : Must contain an entry for each name in clock-names
+ See ../clk/*
+- pinctrl-names : Uses "default", can use "sleep" if provided
+ See ../pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cs-gpios : List of GPIO chip selects
+ See ../spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+ See ../spi/spi-bus.txt
+
+Example:
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ cs-gpios = <&pio17 5 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ st95hf@0{
+ compatible = "st,st95hf";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index ee05dc390694..307537787574 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -12,9 +12,9 @@ Optional properties:
property is not present, then the touchscreen is
disabled. 5 wires is valid for i.MX28 SoC only.
- fsl,ave-ctrl: number of samples per direction to calculate an average value.
- Allowed value is 1 ... 31, default is 4
+ Allowed value is 1 ... 32, default is 4
- fsl,ave-delay: delay between consecutive samples. Allowed value is
- 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
+ 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
2 kHz and its default is 2 (= 1 ms)
- fsl,settling: delay between plate switch to next sample. Allowed value is
1 ... 2047. It counts at 2 kHz and its default is
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
index b7ba01ad1426..56742bc70218 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -15,6 +15,29 @@ I. For patch submitters
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.
+ 4) Any compatible strings used in a chip or board DTS file must be
+ previously documented in the corresponding DT binding text file
+ in Documentation/devicetree/bindings. This rule applies even if
+ the Linux device driver does not yet match on the compatible
+ string. [ checkpatch will emit warnings if this step is not
+ followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
+ ("checkpatch: add DT compatible string documentation checks"). ]
+
+ 5) The wildcard "<chip>" may be used in compatible strings, as in
+ the following example:
+
+ - compatible: Must contain '"nvidia,<chip>-pcie",
+ "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
+
+ As in the above example, the known values of "<chip>" should be
+ documented if it is used.
+
+ 6) If a documented compatible string is not yet matched by the
+ driver, the documentation should also include a compatible
+ string that is matched by the driver (as in the "nvidia,tegra20-pcie"
+ example above).
+
+
II. For kernel maintainers
1) If you aren't comfortable reviewing a given binding, reply to it and ask
diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
index ecf3ed76cd46..6b68cd150405 100644
--- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
@@ -7,7 +7,9 @@ notifications. It is also used to manage emergency shutdown in an
overheating situation.
Required properties :
-- compatible : "nvidia,tegra124-soctherm".
+- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
+ For Tegra132, must contain "nvidia,tegra132-soctherm".
+ For Tegra210, must contain "nvidia,tegra210-soctherm".
- reg : Should contain 1 entry:
- SOCTHERM register set
- interrupts : Defines the interrupt used by SOCTHERM
diff --git a/Documentation/devicetree/bindings/timer/digicolor-timer.txt b/Documentation/devicetree/bindings/timer/digicolor-timer.txt
new file mode 100644
index 000000000000..d1b659bbc29f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/digicolor-timer.txt
@@ -0,0 +1,18 @@
+Conexant Digicolor SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-timer"
+- reg : Specifies base physical address and size of the "Agent Communication"
+ timer registers
+- interrupts : Contains 8 interrupts, one for each timer
+- clocks: phandle to the main clock
+
+Example:
+
+ timer@f0000fc0 {
+ compatible = "cnxt,cx92755-timer";
+ reg = <0xf0000fc0 0x40>;
+ interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+ clocks = <&main_clk>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
index b5082a1cf461..1761f53ee36f 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
@@ -6,7 +6,9 @@ trigger a legacy watchdog reset.
Required properties:
-- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
+- compatible : For Tegra30, must contain "nvidia,tegra30-timer". Otherwise,
+ must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
+ <chip> is tegra124 or tegra132.
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
through 5, and one for the shared interrupt for the remaining channels.
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt
new file mode 100644
index 000000000000..87f0b0042bae
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt
@@ -0,0 +1,18 @@
+Rockchip rk3288 timer
+
+Required properties:
+- compatible: shall be "rockchip,rk3288-timer"
+- reg: base address of the timer register starting with TIMERS CONTROL register
+- interrupts: should contain the interrupts for Timer0
+- clocks : must contain an entry for each entry in clock-names
+- clock-names : must include the following entries:
+ "timer", "pclk"
+
+Example:
+ timer: timer@ff810000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0xff810000 0x20>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt
index 0f92a22fddfa..8933211f32f9 100644
--- a/Documentation/devicetree/bindings/unittest.txt
+++ b/Documentation/devicetree/bindings/unittest.txt
@@ -1,4 +1,4 @@
-* OF selftest platform device
+1) OF selftest platform device
** selftest
@@ -12,3 +12,60 @@ Example:
compatible = "selftest";
status = "okay";
};
+
+2) OF selftest i2c adapter platform device
+
+** platform device unittest adapter
+
+Required properties:
+- compatible: must be selftest-i2c-bus
+
+Children nodes contain selftest i2c devices.
+
+Example:
+ selftest-i2c-bus {
+ compatible = "selftest-i2c-bus";
+ status = "okay";
+ };
+
+3) OF selftest i2c device
+
+** I2C selftest device
+
+Required properties:
+- compatible: must be selftest-i2c-dev
+
+All other properties are optional
+
+Example:
+ selftest-i2c-dev {
+ compatible = "selftest-i2c-dev";
+ status = "okay";
+ };
+
+4) OF selftest i2c mux device
+
+** I2C selftest mux
+
+Required properties:
+- compatible: must be selftest-i2c-mux
+
+Children nodes contain selftest i2c bus nodes per channel.
+
+Example:
+ selftest-i2c-mux {
+ compatible = "selftest-i2c-mux";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel-0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-dev {
+ reg = <8>;
+ compatible = "selftest-i2c-dev";
+ status = "okay";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index bc2222ca3f2a..38fee0f66c12 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -51,7 +51,10 @@ usb1: gadget@fffa4000 {
Atmel High-Speed USB device controller
Required properties:
- - compatible: Should be "atmel,at91sam9rl-udc"
+ - compatible: Should be one of the following
+ "at91sam9rl-udc"
+ "at91sam9g45-udc"
+ "sama5d3-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- ep childnode: To specify the number of endpoints and their properties.
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 482f815363ef..fd132cbee70e 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -20,6 +20,10 @@ Optional properties:
Refer to phy/phy-bindings.txt for generic phy consumer properties
- dr_mode: shall be one of "host", "peripheral" and "otg"
Refer to usb/generic.txt
+- g-use-dma: enable dma usage in gadget driver.
+- g-rx-fifo-size: size of rx fifo size in gadget mode.
+- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
Example:
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index 3dc9140e3dfb..f60785f73d3d 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -6,7 +6,10 @@ Practice : Universal Serial Bus" with the following modifications
and additions :
Required properties :
- - compatible : Should be "nvidia,tegra20-ehci".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+ For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain
+ "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+ tegra114, tegra124, tegra132, or tegra210.
- nvidia,phy : phandle of the PHY that the controller is connected to.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
index c9205fbf26e2..a9aa79fb90ed 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -3,7 +3,10 @@ Tegra SOC USB PHY
The device node for Tegra SOC USB PHY:
Required properties :
- - compatible : Should be "nvidia,tegra<chip>-usb-phy".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
+ For Tegra30, must contain "nvidia,tegra30-usb-phy". Otherwise, must contain
+ "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
+ tegra114, tegra124, tegra132, or tegra210.
- reg : Defines the following set of registers, in the order listed:
- The PHY's own register set.
Always present.
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index b08c903f8668..61b045b6d50e 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -14,6 +14,8 @@ Optional properties:
function should be enabled
- phys: phandle + phy specifier pair
- phy-names: must be "usb"
+ - dmas: Must contain a list of references to DMA specifiers.
+ - dma-names : Must contain a list of DMA names, "tx" or "rx".
Example:
usbhs: usb@e6590000 {
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 43c1a4e06767..0b04fdff9d5a 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -12,6 +12,7 @@ Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index 1bd37faba05b..5be01c859b7a 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -13,10 +13,15 @@ Optional properties:
- clock-frequency: the clock frequency (in Hz) that the PHY clock must
be configured to.
-- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+- vcc-supply: phandle to the regulator that provides power to the PHY.
- reset-gpios: Should specify the GPIO for reset.
+- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
+ (see Documentation/devicetree/bindings/gpio/gpio.txt)
+- vbus-regulator : should specifiy the regulator supplying current drawn from
+ the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
+
Example:
hsusb1_phy {
@@ -26,8 +31,11 @@ Example:
clock-names = "main_clk";
vcc-supply = <&hsusb1_vcc_regulator>;
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ vbus-regulator = <&vbus_regulator>;
};
hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
+GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad1306c..0229b71dc74b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -4,12 +4,13 @@ This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
abilis Abilis Systems
+abcn Abracon Corporation
active-semi Active-Semi International Inc
ad Avionic Design GmbH
adapteva Adapteva, Inc.
+adh AD Holdings Plc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
-ak Asahi Kasei Corp.
allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
@@ -20,9 +21,11 @@ amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
armadeus ARMadeus Systems SARL
+asahi-kasei Asahi Kasei Corp.
atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
+avic Shanghai AVIC Optoelectronics Co., Ltd.
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.
@@ -35,7 +38,9 @@ chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
cnm Chips&Media, Inc.
+cnxt Conexant Systems, Inc.
cortina Cortina Systems, Inc.
+cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
@@ -54,14 +59,17 @@ epcos EPCOS AG
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+ettus NI Ettus Research
eukrea Eukréa Electromatique
everest Everest Semiconductor Co. Ltd.
+everspin Everspin Technologies, Inc.
excito Excito
fcs Fairchild Semiconductor
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
geniatech Geniatech, Inc.
+giantplus Giantplus Technology Co., Ltd.
globalscale Globalscale Technologies, Inc.
gmt Global Mixed-mode Technology, Inc.
google Google, Inc.
@@ -69,6 +77,7 @@ gumstix Gumstix, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
+himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
honeywell Honeywell
@@ -82,8 +91,7 @@ innolux Innolux Corporation
intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
-isil Intersil (deprecated, use isl)
-isl Intersil
+isil Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
lacie LaCie
@@ -118,7 +126,9 @@ nvidia NVIDIA
nxp NXP Semiconductors
onnn ON Semiconductor Corp.
opencores OpenCores.org
+ovti OmniVision Technologies
panasonic Panasonic Corporation
+parade Parade Technologies Inc.
pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
@@ -127,6 +137,7 @@ pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
+qemu QEMU, a generic and open source machine emulator and virtualizer
qnap QNAP Systems, Inc.
radxa Radxa
raidsonic RaidSonic Technology GmbH
@@ -141,8 +152,10 @@ sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
+semtech Semtech Corporation
sil Silicon Image
silabs Silicon Laboratories
+siliconmitus Silicon Mitus, Inc.
simtek
sii Seiko Instruments, Inc.
silergy Silergy Corp.
@@ -153,6 +166,7 @@ snps Synopsys, Inc.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.
+sprd Spreadtrum Communications Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
@@ -164,10 +178,12 @@ tlm Trusted Logic Mobility
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
+truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
+virtio Virtual I/O Device Specification, developed by the OASIS consortium
voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
diff --git a/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/Documentation/devicetree/bindings/video/bridge/ps8622.txt
new file mode 100644
index 000000000000..c989c3807f2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/ps8622.txt
@@ -0,0 +1,31 @@
+ps8622-bridge bindings
+
+Required properties:
+ - compatible: "parade,ps8622" or "parade,ps8625"
+ - reg: first i2c address of the bridge
+ - sleep-gpios: OF device-tree gpio specification for PD_ pin.
+ - reset-gpios: OF device-tree gpio specification for RST_ pin.
+
+Optional properties:
+ - lane-count: number of DP lanes to use
+ - use-external-pwm: backlight will be controlled by an external PWM
+ - video interfaces: Device node can contain video interface port
+ nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ lvds-bridge@48 {
+ compatible = "parade,ps8622";
+ reg = <0x48>;
+ sleep-gpios = <&gpc3 6 1 0 0>;
+ reset-gpios = <&gpc3 1 1 0 0>;
+ lane-count = <1>;
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
index 52b93b2c6748..361971ba104d 100644
--- a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
+++ b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
@@ -3,8 +3,8 @@ ptn3460 bridge bindings
Required properties:
- compatible: "nxp,ptn3460"
- reg: i2c address of the bridge
- - powerdown-gpio: OF device-tree gpio specification
- - reset-gpio: OF device-tree gpio specification
+ - powerdown-gpio: OF device-tree gpio specification for PD_N pin.
+ - reset-gpio: OF device-tree gpio specification for RST_N pin.
- edid-emulation: The EDID emulation entry to use
+-------+------------+------------------+
| Value | Resolution | Description |
@@ -17,6 +17,11 @@ Required properties:
| 6 | 1600x900 | ChiMei M215HGE |
+-------+------------+------------------+
+ - video interfaces: Device node can contain video interface port
+ nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
Example:
lvds-bridge@20 {
compatible = "nxp,ptn3460";
@@ -24,4 +29,11 @@ Example:
powerdown-gpio = <&gpy2 5 1 0 0>;
reset-gpio = <&gpx1 5 1 0 0>;
edid-emulation = <5>;
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
new file mode 100644
index 000000000000..668091f27674
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
@@ -0,0 +1,46 @@
+Rockchip specific extensions to the Synopsys Designware HDMI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dw-hdmi";
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle to hdmi iahb and isfr clocks.
+- clock-names: should be "iahb" "isfr"
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- interrupts: HDMI interrupt number
+- ports: contain a port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. For
+ vopb,set the reg = <0> and set the reg = <1> for vopl.
+- reg-io-width: the width of the reg:1,4, the value should be 4 on
+ rk3288 platform
+
+Optional properties
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+hdmi: hdmi@ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ ddc-i2c-bus = <&i2c5>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+ status = "disabled";
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/video/exynos7-decon.txt b/Documentation/devicetree/bindings/video/exynos7-decon.txt
new file mode 100644
index 000000000000..f5f9c8d4a55a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos7-decon.txt
@@ -0,0 +1,68 @@
+Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos7 series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos7-decon";
+
+- reg: physical base address and length of the DECON registers set.
+
+- interrupt-parent: should be the phandle of the decon controller's
+ parent interrupt controller.
+
+- interrupts: should contain a list of all DECON IP block interrupts in the
+ order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+ format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+ "lcd_sys", in the same order as they were listed in the interrupts
+ property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "pclk_decon0", "aclk_decon0",
+ "decon0_eclk", "decon0_vclk".
+- i80-if-timings: timing configuration for lcd i80 interface support.
+
+Optional Properties:
+- samsung,power-domain: a phandle to DECON power domain node.
+- display-timings: timing settings for DECON, as described in document [1].
+ Can be used in case timings cannot be provided otherwise
+ or to override timings provided by the panel.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+
+Example:
+
+SoC specific DT entry:
+
+ decon@13930000 {
+ compatible = "samsung,exynos7-decon";
+ interrupt-parent = <&combiner>;
+ reg = <0x13930000 0x1000>;
+ interrupt-names = "lcd_sys", "vsync", "fifo";
+ interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
+ clocks = <&clock_disp PCLK_DECON_INT>,
+ <&clock_disp ACLK_DECON_INT>,
+ <&clock_disp SCLK_DECON_INT_ECLK>,
+ <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
+ clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
+ "decon0_vclk";
+ status = "disabled";
+ };
+
+Board specific DT entry:
+
+ decon@13930000 {
+ pinctrl-0 = <&lcd_clk &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 53dbccfa80ca..7a3a9cdb86ab 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -66,6 +66,10 @@ Optional properties for dp-controller:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug
detection
+ -video interfaces: Device node can contain video interface port
+ nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
@@ -105,4 +109,12 @@ Board Specific portion:
vsync-len = <6>;
};
};
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 08b394b1edbf..3e38128f866b 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -15,6 +15,7 @@ Required properties:
a) mixer: Gate of Mixer IP bus clock.
b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
mixer mux.
+ c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
Example:
diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
index 5102830f2760..c902323928f7 100644
--- a/Documentation/devicetree/bindings/video/renesas,du.txt
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -26,6 +26,10 @@ Required Properties:
per LVDS encoder. The functional clocks must be named "du.x" with "x"
being the channel numerical index. The LVDS clocks must be named
"lvds.x" with "x" being the LVDS encoder numerical index.
+ - In addition to the functional and encoder clocks, all DU versions also
+ support externally supplied pixel clocks. Those clocks are optional.
+ When supplied they must be named "dclkin.x" with "x" being the input
+ clock numerical index.
Required nodes:
diff --git a/Documentation/devicetree/bindings/video/ti,dra7-dss.txt b/Documentation/devicetree/bindings/video/ti,dra7-dss.txt
new file mode 100644
index 000000000000..f33a05137b0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,dra7-dss.txt
@@ -0,0 +1,69 @@
+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+ 'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 000000000000..f96083c0bd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+ compatible = "ti,opa362";
+ enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ opa_in: endpoint@0 {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ opa_out: endpoint@0 {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+ };
+};
+
+
+
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index 30ae758e3eef..d418a6ce9812 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -10,7 +10,7 @@ How overlays work
-----------------
A Device Tree's overlay purpose is to modify the kernel's live tree, and
-have the modification affecting the state of the the kernel in a way that
+have the modification affecting the state of the kernel in a way that
is reflecting the changes.
Since the kernel mainly deals with devices, any new device node that result
in an active device should have it created while if the device node is either
@@ -80,7 +80,7 @@ result in foo+bar.dts
};
---- foo+bar.dts -------------------------------------------------------------
-As a result of the the overlay, a new device node (bar) has been created
+As a result of the overlay, a new device node (bar) has been created
so a bar platform device will be registered and if a matching device driver
is loaded the device will be created as expected.
diff --git a/Documentation/dmaengine/00-INDEX b/Documentation/dmaengine/00-INDEX
new file mode 100644
index 000000000000..07de6573d22b
--- /dev/null
+++ b/Documentation/dmaengine/00-INDEX
@@ -0,0 +1,8 @@
+00-INDEX
+ - this file.
+client.txt
+ -the DMA Engine API Guide.
+dmatest.txt
+ - how to compile, configure and use the dmatest system.
+provider.txt
+ - the DMA controller API. \ No newline at end of file
diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt
index 6754b2df8aa1..b577a45b93ea 100644
--- a/Documentation/driver-model/bus.txt
+++ b/Documentation/driver-model/bus.txt
@@ -45,7 +45,7 @@ them are inherently bus-specific. Drivers typically declare an array
of device IDs of devices they support that reside in a bus-specific
driver structure.
-The purpose of the match callback is provide the bus an opportunity to
+The purpose of the match callback is to give the bus an opportunity to
determine if a particular driver supports a particular device by
comparing the device IDs the driver supports with the device ID of a
particular device, without sacrificing bus-specific functionality or
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index b5ab416cd53a..6d1e8eeb5990 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -258,6 +258,8 @@ IIO
devm_iio_device_free()
devm_iio_device_register()
devm_iio_device_unregister()
+ devm_iio_kfifo_allocate()
+ devm_iio_kfifo_free()
devm_iio_trigger_alloc()
devm_iio_trigger_free()
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index ac28149aede4..9922939e7d99 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -34,6 +34,9 @@ configfs/
- directory containing configfs documentation and example code.
cramfs.txt
- info on the cram filesystem for small storage (ROMs etc).
+dax.txt
+ - info on avoiding the page cache for files stored on CPU-addressable
+ storage devices.
debugfs.txt
- info on the debugfs filesystem.
devpts.txt
@@ -154,5 +157,3 @@ xfs-self-describing-metadata.txt
- info on XFS Self Describing Metadata.
xfs.txt
- info and mount options for the XFS filesystem.
-xip.txt
- - info on execute-in-place for file mappings.
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index b30753cbf431..2ca3d17eee56 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -199,8 +199,6 @@ prototypes:
int (*releasepage) (struct page *, int);
void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset);
- int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
- unsigned long *);
int (*migratepage)(struct address_space *, struct page *, struct page *);
int (*launder_page)(struct page *);
int (*is_partially_uptodate)(struct page *, unsigned long, unsigned long);
@@ -225,7 +223,6 @@ invalidatepage: yes
releasepage: yes
freepage: yes
direct_IO:
-get_xip_mem: maybe
migratepage: yes (both)
launder_page: yes
is_partially_uptodate: yes
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt
new file mode 100644
index 000000000000..baf41118660d
--- /dev/null
+++ b/Documentation/filesystems/dax.txt
@@ -0,0 +1,94 @@
+Direct Access for files
+-----------------------
+
+Motivation
+----------
+
+The page cache is usually used to buffer reads and writes to files.
+It is also used to provide the pages which are mapped into userspace
+by a call to mmap.
+
+For block devices that are memory-like, the page cache pages would be
+unnecessary copies of the original storage. The DAX code removes the
+extra copy by performing reads and writes directly to the storage device.
+For file mappings, the storage device is mapped directly into userspace.
+
+
+Usage
+-----
+
+If you have a block device which supports DAX, you can make a filesystem
+on it as usual. When mounting it, use the -o dax option manually
+or add 'dax' to the options in /etc/fstab.
+
+
+Implementation Tips for Block Driver Writers
+--------------------------------------------
+
+To support DAX in your block driver, implement the 'direct_access'
+block device operation. It is used to translate the sector number
+(expressed in units of 512-byte sectors) to a page frame number (pfn)
+that identifies the physical page for the memory. It also returns a
+kernel virtual address that can be used to access the memory.
+
+The direct_access method takes a 'size' parameter that indicates the
+number of bytes being requested. The function should return the number
+of bytes that can be contiguously accessed at that offset. It may also
+return a negative errno if an error occurs.
+
+In order to support this method, the storage must be byte-accessible by
+the CPU at all times. If your device uses paging techniques to expose
+a large amount of memory through a smaller window, then you cannot
+implement direct_access. Equally, if your device can occasionally
+stall the CPU for an extended period, you should also not attempt to
+implement direct_access.
+
+These block devices may be used for inspiration:
+- axonram: Axon DDR2 device driver
+- brd: RAM backed block device driver
+- dcssblk: s390 dcss block device driver
+
+
+Implementation Tips for Filesystem Writers
+------------------------------------------
+
+Filesystem support consists of
+- adding support to mark inodes as being DAX by setting the S_DAX flag in
+ i_flags
+- implementing the direct_IO address space operation, and calling
+ dax_do_io() instead of blockdev_direct_IO() if S_DAX is set
+- implementing an mmap file operation for DAX files which sets the
+ VM_MIXEDMAP flag on the VMA, and setting the vm_ops to include handlers
+ for fault and page_mkwrite (which should probably call dax_fault() and
+ dax_mkwrite(), passing the appropriate get_block() callback)
+- calling dax_truncate_page() instead of block_truncate_page() for DAX files
+- calling dax_zero_page_range() instead of zero_user() for DAX files
+- ensuring that there is sufficient locking between reads, writes,
+ truncates and page faults
+
+The get_block() callback passed to the DAX functions may return
+uninitialised extents. If it does, it must ensure that simultaneous
+calls to get_block() (for example by a page-fault racing with a read()
+or a write()) work correctly.
+
+These filesystems may be used for inspiration:
+- ext2: the second extended filesystem, see Documentation/filesystems/ext2.txt
+- ext4: the fourth extended filesystem, see Documentation/filesystems/ext4.txt
+
+
+Shortcomings
+------------
+
+Even if the kernel or its modules are stored on a filesystem that supports
+DAX on a block device that supports DAX, they will still be copied into RAM.
+
+The DAX code does not work correctly on architectures which have virtually
+mapped caches such as ARM, MIPS and SPARC.
+
+Calling get_user_pages() on a range of user memory that has been mmaped
+from a DAX file will fail as there are no 'struct page' to describe
+those pages. This problem is being worked on. That means that O_DIRECT
+reads/writes to those memory ranges from a non-DAX file will fail (note
+that O_DIRECT reads/writes _of a DAX file_ do work, it is the memory
+that is being accessed that is key here). Other things that will not
+work include RDMA, sendfile() and splice().
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 67639f905f10..b9714569e472 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -20,6 +20,9 @@ minixdf Makes `df' act like Minix.
check=none, nocheck (*) Don't do extra checking of bitmaps on mount
(check=normal and check=strict options removed)
+dax Use direct access (no page cache). See
+ Documentation/filesystems/dax.txt.
+
debug Extra debugging information is sent to the
kernel syslog. Useful for developers.
@@ -56,8 +59,6 @@ noacl Don't support POSIX ACLs.
nobh Do not attach buffer_heads to file pagecache.
-xip Use execute in place (no caching) if possible
-
grpquota,noquota,quota,usrquota Quota options are silently ignored by ext2.
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 919a3293aaa4..6c0108eb0137 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -386,6 +386,10 @@ max_dir_size_kb=n This limits the size of directories so that any
i_version Enable 64-bit inode version support. This option is
off by default.
+dax Use direct access (no page cache). See
+ Documentation/filesystems/dax.txt. Note that
+ this option is incompatible with data=journal.
+
Data Mode
=========
There are 3 different data modes:
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
index e0950c483c22..dac11d7fef27 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@@ -106,6 +106,8 @@ background_gc=%s Turn on/off cleaning operations, namely garbage
Default value for this option is on. So garbage
collection is on by default.
disable_roll_forward Disable the roll-forward recovery routine
+norecovery Disable the roll-forward recovery routine, mounted read-
+ only (i.e., -o ro,disable_roll_forward)
discard Issue discard/TRIM commands when a segment is cleaned.
no_heap Disable heap-style segment allocation which finds free
segments for data from the beginning of main area, while
@@ -197,6 +199,10 @@ Files in /sys/fs/f2fs/<devname>
checkpoint is triggered, and issued during the
checkpoint. By default, it is disabled with 0.
+ trim_sections This parameter controls the number of sections
+ to be trimmed out in batch mode when FITRIM
+ conducts. 32 sections is set by default.
+
ipu_policy This parameter controls the policy of in-place
updates in f2fs. There are five policies:
0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR,
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 1b805a0efbb0..f6d9c99103a4 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -196,7 +196,8 @@ struct fiemap_extent_info {
};
It is intended that the file system should not need to access any of this
-structure directly.
+structure directly. Filesystem handlers should be tolerant to signals and return
+EINTR once fatal signal received.
Flag checking should be done at the beginning of the ->fiemap callback via the
diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.txt
index cfd02712b83e..51f61db787fb 100644
--- a/Documentation/filesystems/inotify.txt
+++ b/Documentation/filesystems/inotify.txt
@@ -4,201 +4,10 @@
Document started 15 Mar 2005 by Robert Love <rml@novell.com>
+Document updated 4 Jan 2015 by Zhang Zhen <zhenzhang.zhang@huawei.com>
+ --Deleted obsoleted interface, just refer to manpages for user interface.
-
-(i) User Interface
-
-Inotify is controlled by a set of three system calls and normal file I/O on a
-returned file descriptor.
-
-First step in using inotify is to initialise an inotify instance:
-
- int fd = inotify_init ();
-
-Each instance is associated with a unique, ordered queue.
-
-Change events are managed by "watches". A watch is an (object,mask) pair where
-the object is a file or directory and the mask is a bit mask of one or more
-inotify events that the application wishes to receive. See <linux/inotify.h>
-for valid events. A watch is referenced by a watch descriptor, or wd.
-
-Watches are added via a path to the file.
-
-Watches on a directory will return events on any files inside of the directory.
-
-Adding a watch is simple:
-
- int wd = inotify_add_watch (fd, path, mask);
-
-Where "fd" is the return value from inotify_init(), path is the path to the
-object to watch, and mask is the watch mask (see <linux/inotify.h>).
-
-You can update an existing watch in the same manner, by passing in a new mask.
-
-An existing watch is removed via
-
- int ret = inotify_rm_watch (fd, wd);
-
-Events are provided in the form of an inotify_event structure that is read(2)
-from a given inotify instance. The filename is of dynamic length and follows
-the struct. It is of size len. The filename is padded with null bytes to
-ensure proper alignment. This padding is reflected in len.
-
-You can slurp multiple events by passing a large buffer, for example
-
- size_t len = read (fd, buf, BUF_LEN);
-
-Where "buf" is a pointer to an array of "inotify_event" structures at least
-BUF_LEN bytes in size. The above example will return as many events as are
-available and fit in BUF_LEN.
-
-Each inotify instance fd is also select()- and poll()-able.
-
-You can find the size of the current event queue via the standard FIONREAD
-ioctl on the fd returned by inotify_init().
-
-All watches are destroyed and cleaned up on close.
-
-
-(ii)
-
-Prototypes:
-
- int inotify_init (void);
- int inotify_add_watch (int fd, const char *path, __u32 mask);
- int inotify_rm_watch (int fd, __u32 mask);
-
-
-(iii) Kernel Interface
-
-Inotify's kernel API consists a set of functions for managing watches and an
-event callback.
-
-To use the kernel API, you must first initialize an inotify instance with a set
-of inotify_operations. You are given an opaque inotify_handle, which you use
-for any further calls to inotify.
-
- struct inotify_handle *ih = inotify_init(my_event_handler);
-
-You must provide a function for processing events and a function for destroying
-the inotify watch.
-
- void handle_event(struct inotify_watch *watch, u32 wd, u32 mask,
- u32 cookie, const char *name, struct inode *inode)
-
- watch - the pointer to the inotify_watch that triggered this call
- wd - the watch descriptor
- mask - describes the event that occurred
- cookie - an identifier for synchronizing events
- name - the dentry name for affected files in a directory-based event
- inode - the affected inode in a directory-based event
-
- void destroy_watch(struct inotify_watch *watch)
-
-You may add watches by providing a pre-allocated and initialized inotify_watch
-structure and specifying the inode to watch along with an inotify event mask.
-You must pin the inode during the call. You will likely wish to embed the
-inotify_watch structure in a structure of your own which contains other
-information about the watch. Once you add an inotify watch, it is immediately
-subject to removal depending on filesystem events. You must grab a reference if
-you depend on the watch hanging around after the call.
-
- inotify_init_watch(&my_watch->iwatch);
- inotify_get_watch(&my_watch->iwatch); // optional
- s32 wd = inotify_add_watch(ih, &my_watch->iwatch, inode, mask);
- inotify_put_watch(&my_watch->iwatch); // optional
-
-You may use the watch descriptor (wd) or the address of the inotify_watch for
-other inotify operations. You must not directly read or manipulate data in the
-inotify_watch. Additionally, you must not call inotify_add_watch() more than
-once for a given inotify_watch structure, unless you have first called either
-inotify_rm_watch() or inotify_rm_wd().
-
-To determine if you have already registered a watch for a given inode, you may
-call inotify_find_watch(), which gives you both the wd and the watch pointer for
-the inotify_watch, or an error if the watch does not exist.
-
- wd = inotify_find_watch(ih, inode, &watchp);
-
-You may use container_of() on the watch pointer to access your own data
-associated with a given watch. When an existing watch is found,
-inotify_find_watch() bumps the refcount before releasing its locks. You must
-put that reference with:
-
- put_inotify_watch(watchp);
-
-Call inotify_find_update_watch() to update the event mask for an existing watch.
-inotify_find_update_watch() returns the wd of the updated watch, or an error if
-the watch does not exist.
-
- wd = inotify_find_update_watch(ih, inode, mask);
-
-An existing watch may be removed by calling either inotify_rm_watch() or
-inotify_rm_wd().
-
- int ret = inotify_rm_watch(ih, &my_watch->iwatch);
- int ret = inotify_rm_wd(ih, wd);
-
-A watch may be removed while executing your event handler with the following:
-
- inotify_remove_watch_locked(ih, iwatch);
-
-Call inotify_destroy() to remove all watches from your inotify instance and
-release it. If there are no outstanding references, inotify_destroy() will call
-your destroy_watch op for each watch.
-
- inotify_destroy(ih);
-
-When inotify removes a watch, it sends an IN_IGNORED event to your callback.
-You may use this event as an indication to free the watch memory. Note that
-inotify may remove a watch due to filesystem events, as well as by your request.
-If you use IN_ONESHOT, inotify will remove the watch after the first event, at
-which point you may call the final inotify_put_watch.
-
-(iv) Kernel Interface Prototypes
-
- struct inotify_handle *inotify_init(struct inotify_operations *ops);
-
- inotify_init_watch(struct inotify_watch *watch);
-
- s32 inotify_add_watch(struct inotify_handle *ih,
- struct inotify_watch *watch,
- struct inode *inode, u32 mask);
-
- s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode,
- struct inotify_watch **watchp);
-
- s32 inotify_find_update_watch(struct inotify_handle *ih,
- struct inode *inode, u32 mask);
-
- int inotify_rm_wd(struct inotify_handle *ih, u32 wd);
-
- int inotify_rm_watch(struct inotify_handle *ih,
- struct inotify_watch *watch);
-
- void inotify_remove_watch_locked(struct inotify_handle *ih,
- struct inotify_watch *watch);
-
- void inotify_destroy(struct inotify_handle *ih);
-
- void get_inotify_watch(struct inotify_watch *watch);
- void put_inotify_watch(struct inotify_watch *watch);
-
-
-(v) Internal Kernel Implementation
-
-Each inotify instance is represented by an inotify_handle structure.
-Inotify's userspace consumers also have an inotify_device which is
-associated with the inotify_handle, and on which events are queued.
-
-Each watch is associated with an inotify_watch structure. Watches are chained
-off of each associated inotify_handle and each associated inode.
-
-See fs/notify/inotify/inotify_fsnotify.c and fs/notify/inotify/inotify_user.c
-for the locking and lifetime rules.
-
-
-(vi) Rationale
+(i) Rationale
Q: What is the design decision behind not tying the watch to the open fd of
the watched object?
diff --git a/Documentation/filesystems/nfs/nfs41-server.txt b/Documentation/filesystems/nfs/nfs41-server.txt
index c49cd7e796e7..682a59fabe3f 100644
--- a/Documentation/filesystems/nfs/nfs41-server.txt
+++ b/Documentation/filesystems/nfs/nfs41-server.txt
@@ -24,11 +24,6 @@ focuses on the mandatory-to-implement NFSv4.1 Sessions, providing
"exactly once" semantics and better control and throttling of the
resources allocated for each client.
-Other NFSv4.1 features, Parallel NFS operations in particular,
-are still under development out of tree.
-See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design
-for more information.
-
The table below, taken from the NFSv4.1 document, lists
the operations that are mandatory to implement (REQ), optional
(OPT), and NFSv4.0 operations that are required not to implement (MNI)
@@ -43,9 +38,7 @@ The OPTIONAL features identified and their abbreviations are as follows:
The following abbreviations indicate the linux server implementation status.
I Implemented NFSv4.1 operations.
NS Not Supported.
- NS* unimplemented optional feature.
- P pNFS features implemented out of tree.
- PNS pNFS features that are not supported yet (out of tree).
+ NS* Unimplemented optional feature.
Operations
@@ -70,13 +63,13 @@ I | DESTROY_SESSION | REQ | | Section 18.37 |
I | EXCHANGE_ID | REQ | | Section 18.35 |
I | FREE_STATEID | REQ | | Section 18.38 |
| GETATTR | REQ | | Section 18.7 |
-P | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 |
-P | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 |
+I | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 |
+NS*| GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 |
| GETFH | REQ | | Section 18.8 |
NS*| GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 |
-P | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 |
-P | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 |
-P | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 |
+I | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 |
+I | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 |
+I | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 |
| LINK | OPT | | Section 18.9 |
| LOCK | REQ | | Section 18.10 |
| LOCKT | REQ | | Section 18.11 |
@@ -122,9 +115,9 @@ Callback Operations
| | MNI | or OPT) | |
+-------------------------+-----------+-------------+---------------+
| CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 |
-P | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 |
+I | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 |
NS*| CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 |
-P | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 |
+NS*| CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 |
NS*| CB_NOTIFY_LOCK | OPT | | Section 20.11 |
NS*| CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 |
| CB_RECALL | OPT | FDELG, | Section 20.2 |
diff --git a/Documentation/filesystems/nfs/pnfs-block-server.txt b/Documentation/filesystems/nfs/pnfs-block-server.txt
new file mode 100644
index 000000000000..2143673cf154
--- /dev/null
+++ b/Documentation/filesystems/nfs/pnfs-block-server.txt
@@ -0,0 +1,37 @@
+pNFS block layout server user guide
+
+The Linux NFS server now supports the pNFS block layout extension. In this
+case the NFS server acts as Metadata Server (MDS) for pNFS, which in addition
+to handling all the metadata access to the NFS export also hands out layouts
+to the clients to directly access the underlying block devices that are
+shared with the client.
+
+To use pNFS block layouts with with the Linux NFS server the exported file
+system needs to support the pNFS block layouts (currently just XFS), and the
+file system must sit on shared storage (typically iSCSI) that is accessible
+to the clients in addition to the MDS. As of now the file system needs to
+sit directly on the exported volume, striping or concatenation of
+volumes on the MDS and clients is not supported yet.
+
+On the server, pNFS block volume support is automatically if the file system
+support it. On the client make sure the kernel has the CONFIG_PNFS_BLOCK
+option enabled, the blkmapd daemon from nfs-utils is running, and the
+file system is mounted using the NFSv4.1 protocol version (mount -o vers=4.1).
+
+If the nfsd server needs to fence a non-responding client it calls
+/sbin/nfsd-recall-failed with the first argument set to the IP address of
+the client, and the second argument set to the device node without the /dev
+prefix for the file system to be fenced. Below is an example file that shows
+how to translate the device into a serial number from SCSI EVPD 0x80:
+
+cat > /sbin/nfsd-recall-failed << EOF
+#!/bin/sh
+
+CLIENT="$1"
+DEV="/dev/$2"
+EVPD=`sg_inq --page=0x80 ${DEV} | \
+ grep "Unit serial number:" | \
+ awk -F ': ' '{print $2}'`
+
+echo "fencing client ${CLIENT} serial ${EVPD}" >> /var/log/pnfsd-fence.log
+EOF
diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt
index adc81a35fe2d..44a9f2493a88 100644
--- a/Documentation/filesystems/nfs/pnfs.txt
+++ b/Documentation/filesystems/nfs/pnfs.txt
@@ -57,15 +57,16 @@ bit is set, preventing any new lsegs from being added.
layout drivers
--------------
-PNFS utilizes what is called layout drivers. The STD defines 3 basic
-layout types: "files" "objects" and "blocks". For each of these types
-there is a layout-driver with a common function-vectors table which
-are called by the nfs-client pnfs-core to implement the different layout
-types.
+PNFS utilizes what is called layout drivers. The STD defines 4 basic
+layout types: "files", "objects", "blocks", and "flexfiles". For each
+of these types there is a layout-driver with a common function-vectors
+table which are called by the nfs-client pnfs-core to implement the
+different layout types.
-Files-layout-driver code is in: fs/nfs/nfs4filelayout.c && nfs4filelayoutdev.c
+Files-layout-driver code is in: fs/nfs/filelayout/.. directory
Objects-layout-deriver code is in: fs/nfs/objlayout/.. directory
Blocks-layout-deriver code is in: fs/nfs/blocklayout/.. directory
+Flexfiles-layout-driver code is in: fs/nfs/flexfilelayout/.. directory
objects-layout setup
--------------------
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 7618a287aa41..28f8c08201e2 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -100,3 +100,7 @@ coherency=full (*) Disallow concurrent O_DIRECT writes, cluster inode
coherency=buffered Allow concurrent O_DIRECT writes without EX lock among
nodes, which gains high performance at risk of getting
stale data on other nodes.
+journal_async_commit Commit block can be written to disk without waiting
+ for descriptor blocks. If enabled older kernels cannot
+ mount the device. This will enable 'journal_checksum'
+ internally.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index aae9dd13c91f..a07ba61662ed 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -28,7 +28,7 @@ Table of Contents
1.6 Parallel port info in /proc/parport
1.7 TTY info in /proc/tty
1.8 Miscellaneous kernel statistics in /proc/stat
- 1.9 Ext4 file system parameters
+ 1.9 Ext4 file system parameters
2 Modifying System Parameters
@@ -42,6 +42,7 @@ Table of Contents
3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
3.7 /proc/<pid>/task/<tid>/children - Information about task children
3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
+ 3.9 /proc/<pid>/map_files - Information about memory mapped files
4 Configuring procfs
4.1 Mount options
@@ -144,6 +145,8 @@ Table 1-1: Process specific entries in /proc
stack Report full stack trace, enable via CONFIG_STACKTRACE
smaps a extension based on maps, showing the memory consumption of
each mapping and flags associated with it
+ numa_maps an extension based on maps, showing the memory locality and
+ binding policy as well as mem usage (in pages) of each mapping.
..............................................................................
For example, to get the status information of a process, all you have to do is
@@ -488,12 +491,47 @@ To clear the bits for the file mapped pages associated with the process
To clear the soft-dirty bit
> echo 4 > /proc/PID/clear_refs
+To reset the peak resident set size ("high water mark") to the process's
+current value:
+ > echo 5 > /proc/PID/clear_refs
+
Any other value written to /proc/PID/clear_refs will have no effect.
The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
using /proc/kpageflags and number of times a page is mapped using
/proc/kpagecount. For detailed explanation, see Documentation/vm/pagemap.txt.
+The /proc/pid/numa_maps is an extension based on maps, showing the memory
+locality and binding policy, as well as the memory usage (in pages) of
+each mapping. The output follows a general format where mapping details get
+summarized separated by blank spaces, one mapping per each file line:
+
+address policy mapping details
+
+00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
+00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
+320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
+320698b000 default file=/lib64/libc-2.12.so
+3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
+3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
+7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
+7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
+7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
+7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
+7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
+
+Where:
+"address" is the starting address for the mapping;
+"policy" reports the NUMA memory policy set for the mapping (see vm/numa_memory_policy.txt);
+"mapping details" summarizes mapping data such as mapping type, page usage counters,
+node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
+size, in KB, that is backing the mapping up.
+
1.2 Kernel data
---------------
@@ -1763,6 +1801,28 @@ pair provide additional information particular to the objects they represent.
with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
still exhibits timer's remaining time.
+3.9 /proc/<pid>/map_files - Information about memory mapped files
+---------------------------------------------------------------------
+This directory contains symbolic links which represent memory mapped files
+the process is maintaining. Example output:
+
+ | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
+ | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
+ | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
+ | ...
+ | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
+ | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
+
+The name of a link represents the virtual memory bounds of a mapping, i.e.
+vm_area_struct::vm_start-vm_area_struct::vm_end.
+
+The main purpose of the map_files is to retrieve a set of memory mapped
+files in a fast way instead of parsing /proc/<pid>/maps or
+/proc/<pid>/smaps, both of which contain many more records. At the same
+time one can open(2) mappings from the listings of two processes and
+comparing their inode numbers to figure out which anonymous memory areas
+are actually shared.
+
------------------------------------------------------------------------------
Configuring procfs
------------------------------------------------------------------------------
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index b797ed38de46..9de4303201e1 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -194,16 +194,16 @@ which is in the string esc will be represented in octal form in the output.
There are also a pair of functions for printing filenames:
- int seq_path(struct seq_file *m, struct path *path, char *esc);
- int seq_path_root(struct seq_file *m, struct path *path,
- struct path *root, char *esc)
+ int seq_path(struct seq_file *m, const struct path *path,
+ const char *esc);
+ int seq_path_root(struct seq_file *m, const struct path *path,
+ const struct path *root, const char *esc)
Here, path indicates the file of interest, and esc is a set of characters
which should be escaped in the output. A call to seq_path() will output
the path relative to the current process's filesystem root. If a different
-root is desired, it can be used with seq_path_root(). Note that, if it
-turns out that path cannot be reached from root, the value of root will be
-changed in seq_file_root() to a root which *does* work.
+root is desired, it can be used with seq_path_root(). If it turns out that
+path cannot be reached from root, seq_path_root() returns SEQ_SKIP.
A function producing complicated output may want to check
bool seq_has_overflowed(struct seq_file *m);
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 43ce0507ee25..966b22829f3b 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -591,8 +591,6 @@ struct address_space_operations {
int (*releasepage) (struct page *, int);
void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset);
- struct page* (*get_xip_page)(struct address_space *, sector_t,
- int);
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
@@ -748,11 +746,6 @@ struct address_space_operations {
and transfer data directly between the storage and the
application's address space.
- get_xip_page: called by the VM to translate a block number to a page.
- The page is valid until the corresponding filesystem is unmounted.
- Filesystems that want to use execute-in-place (XIP) need to implement
- it. An example implementation can be found in fs/ext2/xip.c.
-
migrate_page: This is used to compact the physical memory usage.
If the VM wants to relocate a page (maybe off a memory card
that is signalling imminent failure) it will pass a new page
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 5be51fd888bd..0bfafe108357 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -287,9 +287,9 @@ The following sysctls are available for the XFS filesystem:
XFS_ERRLEVEL_LOW: 1
XFS_ERRLEVEL_HIGH: 5
- fs.xfs.panic_mask (Min: 0 Default: 0 Max: 127)
+ fs.xfs.panic_mask (Min: 0 Default: 0 Max: 255)
Causes certain error conditions to call BUG(). Value is a bitmask;
- AND together the tags which represent errors which should cause panics:
+ OR together the tags which represent errors which should cause panics:
XFS_NO_PTAG 0
XFS_PTAG_IFLUSH 0x00000001
@@ -299,6 +299,7 @@ The following sysctls are available for the XFS filesystem:
XFS_PTAG_SHUTDOWN_CORRUPT 0x00000010
XFS_PTAG_SHUTDOWN_IOERROR 0x00000020
XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040
+ XFS_PTAG_FSBLOCK_ZERO 0x00000080
This option is intended for debugging only.
@@ -348,16 +349,13 @@ The following sysctls are available for the XFS filesystem:
Deprecated Sysctls
==================
- fs.xfs.xfsbufd_centisecs (Min: 50 Default: 100 Max: 3000)
- Dirty metadata is now tracked by the log subsystem and
- flushing is driven by log space and idling demands. The
- xfsbufd no longer exists, so this syctl does nothing.
+None at present.
- Due for removal in 3.14.
- fs.xfs.age_buffer_centisecs (Min: 100 Default: 1500 Max: 720000)
- Dirty metadata is now tracked by the log subsystem and
- flushing is driven by log space and idling demands. The
- xfsbufd no longer exists, so this syctl does nothing.
+Removed Sysctls
+===============
- Due for removal in 3.14.
+ Name Removed
+ ---- -------
+ fs.xfs.xfsbufd_centisec v3.20
+ fs.xfs.age_buffer_centisecs v3.20
diff --git a/Documentation/filesystems/xip.txt b/Documentation/filesystems/xip.txt
deleted file mode 100644
index 0466ee569278..000000000000
--- a/Documentation/filesystems/xip.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Execute-in-place for file mappings
-----------------------------------
-
-Motivation
-----------
-File mappings are performed by mapping page cache pages to userspace. In
-addition, read&write type file operations also transfer data from/to the page
-cache.
-
-For memory backed storage devices that use the block device interface, the page
-cache pages are in fact copies of the original storage. Various approaches
-exist to work around the need for an extra copy. The ramdisk driver for example
-does read the data into the page cache, keeps a reference, and discards the
-original data behind later on.
-
-Execute-in-place solves this issue the other way around: instead of keeping
-data in the page cache, the need to have a page cache copy is eliminated
-completely. With execute-in-place, read&write type operations are performed
-directly from/to the memory backed storage device. For file mappings, the
-storage device itself is mapped directly into userspace.
-
-This implementation was initially written for shared memory segments between
-different virtual machines on s390 hardware to allow multiple machines to
-share the same binaries and libraries.
-
-Implementation
---------------
-Execute-in-place is implemented in three steps: block device operation,
-address space operation, and file operations.
-
-A block device operation named direct_access is used to retrieve a
-reference (pointer) to a block on-disk. The reference is supposed to be
-cpu-addressable, physical address and remain valid until the release operation
-is performed. A struct block_device reference is used to address the device,
-and a sector_t argument is used to identify the individual block. As an
-alternative, memory technology devices can be used for this.
-
-The block device operation is optional, these block devices support it as of
-today:
-- dcssblk: s390 dcss block device driver
-
-An address space operation named get_xip_mem is used to retrieve references
-to a page frame number and a kernel address. To obtain these values a reference
-to an address_space is provided. This function assigns values to the kmem and
-pfn parameters. The third argument indicates whether the function should allocate
-blocks if needed.
-
-This address space operation is mutually exclusive with readpage&writepage that
-do page cache read/write operations.
-The following filesystems support it as of today:
-- ext2: the second extended filesystem, see Documentation/filesystems/ext2.txt
-
-A set of file operations that do utilize get_xip_page can be found in
-mm/filemap_xip.c . The following file operation implementations are provided:
-- aio_read/aio_write
-- readv/writev
-- sendfile
-
-The generic file operations do_sync_read/do_sync_write can be used to implement
-classic synchronous IO calls.
-
-Shortcomings
-------------
-This implementation is limited to storage devices that are cpu addressable at
-all times (no highmem or such). It works well on rom/ram, but enhancements are
-needed to make it work with flash in read+write mode.
-Putting the Linux kernel and/or its modules on a xip filesystem does not mean
-they are not copied.
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
index 31b16610c416..77b36f59d16b 100644
--- a/Documentation/futex-requeue-pi.txt
+++ b/Documentation/futex-requeue-pi.txt
@@ -98,7 +98,7 @@ rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
allow the requeue code to acquire an uncontended rt_mutex on behalf
of the waiter and to enqueue the waiter on a contended rt_mutex.
Two new system calls provide the kernel<->user interface to
-requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
+requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_CMP_REQUEUE_PI.
FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
and pthread_cond_timedwait()) to block on the initial futex and wait
@@ -107,7 +107,7 @@ result of a high-speed collision between futex_wait() and
futex_lock_pi(), with some extra logic to check for the additional
wake-up scenarios.
-FUTEX_REQUEUE_CMP_PI is called by the waker
+FUTEX_CMP_REQUEUE_PI is called by the waker
(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
possibly wake the waiting tasks. Internally, this system call is
still handled by futex_requeue (by passing requeue_pi=1). Before
@@ -120,12 +120,12 @@ task as a waiter on the underlying rt_mutex. It is possible that
the lock can be acquired at this stage as well, if so, the next
waiter is woken to finish the acquisition of the lock.
-FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
+FUTEX_CMP_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
their sum is all that really matters. futex_requeue() will wake or
requeue up to nr_wake + nr_requeue tasks. It will wake only as many
tasks as it can acquire the lock for, which in the majority of cases
should be 0 as good programming practice dictates that the caller of
either pthread_cond_broadcast() or pthread_cond_signal() acquire the
-mutex prior to making the call. FUTEX_REQUEUE_PI requires that
+mutex prior to making the call. FUTEX_CMP_REQUEUE_PI requires that
nr_wake=1. nr_requeue should be INT_MAX for broadcast and 0 for
signal.
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 4452786225b8..8b35f51fe7b6 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -31,7 +31,7 @@ through gpiod_get(). For example:
<&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
<&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
- power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
This property will make GPIOs 15, 16 and 17 available to the driver under the
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 4223c2d3b508..cfd31d94c872 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -26,6 +26,12 @@ Supported chips:
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
+ * Texas Instruments INA231
+ Prefix: 'ina231'
+ Addresses: I2C 0x40 - 0x4f
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/
+
Author: Lothar Felten <l-felten@ti.com>
Description
@@ -41,9 +47,18 @@ interface. The INA220 monitors both shunt drop and supply voltage.
The INA226 is a current shunt and power monitor with an I2C interface.
The INA226 monitors both a shunt voltage drop and bus supply voltage.
-The INA230 is a high or low side current shunt and power monitor with an I2C
-interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
+INA230 and INA231 are high or low side current shunt and power monitors
+with an I2C interface. The chips monitor both a shunt voltage drop and
+bus supply voltage.
-The shunt value in micro-ohms can be set via platform data or device tree.
-Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
if the device tree is used.
+
+Additionally ina226 supports update_interval attribute as described in
+Documentation/hwmon/sysfs-interface. Internally the interval is the sum of
+bus and shunt voltage conversion times multiplied by the averaging rate. We
+don't touch the conversion times and only modify the number of averages. The
+lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
+The actual programmed interval may vary from the desired value.
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
new file mode 100644
index 000000000000..092fc10961fe
--- /dev/null
+++ b/Documentation/kasan.txt
@@ -0,0 +1,170 @@
+Kernel address sanitizer
+================
+
+0. Overview
+===========
+
+Kernel Address sanitizer (KASan) is a dynamic memory error detector. It provides
+a fast and comprehensive solution for finding use-after-free and out-of-bounds
+bugs.
+
+KASan uses compile-time instrumentation for checking every memory access,
+therefore you will need a certain version of GCC > 4.9.2
+
+Currently KASan is supported only for x86_64 architecture and requires that the
+kernel be built with the SLUB allocator.
+
+1. Usage
+=========
+
+To enable KASAN configure kernel with:
+
+ CONFIG_KASAN = y
+
+and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
+is compiler instrumentation types. The former produces smaller binary the
+latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
+latter.
+
+Currently KASAN works only with the SLUB memory allocator.
+For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
+at least 'slub_debug=U' in the boot cmdline.
+
+To disable instrumentation for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+ For a single file (e.g. main.o):
+ KASAN_SANITIZE_main.o := n
+
+ For all files in one directory:
+ KASAN_SANITIZE := n
+
+1.1 Error reports
+==========
+
+A typical out of bounds access report looks like this:
+
+==================================================================
+BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
+Write of size 1 by task modprobe/1689
+=============================================================================
+BUG kmalloc-128 (Not tainted): kasan error
+-----------------------------------------------------------------------------
+
+Disabling lock debugging due to kernel taint
+INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
+ __slab_alloc+0x4b4/0x4f0
+ kmem_cache_alloc_trace+0x10b/0x190
+ kmalloc_oob_right+0x3d/0x75 [test_kasan]
+ init_module+0x9/0x47 [test_kasan]
+ do_one_initcall+0x99/0x200
+ load_module+0x2cb3/0x3b20
+ SyS_finit_module+0x76/0x80
+ system_call_fastpath+0x12/0x17
+INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
+INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
+
+Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
+Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
+Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........
+Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
+CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98
+Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
+ ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
+ ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
+ ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
+Call Trace:
+ [<ffffffff81cc68ae>] dump_stack+0x46/0x58
+ [<ffffffff811fd848>] print_trailer+0xf8/0x160
+ [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+ [<ffffffff811ff0f5>] object_err+0x35/0x40
+ [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+ [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
+ [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+ [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
+ [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+ [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+ [<ffffffff8120a995>] __asan_store1+0x75/0xb0
+ [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
+ [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+ [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
+ [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
+ [<ffffffff810002d9>] do_one_initcall+0x99/0x200
+ [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
+ [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
+ [<ffffffff8110fd70>] ? m_show+0x240/0x240
+ [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
+ [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
+Memory state around the buggy address:
+ ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
+ ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
+>ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
+ ^
+ ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+ ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
+ ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+ ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+==================================================================
+
+First sections describe slub object where bad access happened.
+See 'SLUB Debug output' section in Documentation/vm/slub.txt for details.
+
+In the last section the report shows memory state around the accessed address.
+Reading this part requires some more understanding of how KASAN works.
+
+Each 8 bytes of memory are encoded in one shadow byte as accessible,
+partially accessible, freed or they can be part of a redzone.
+We use the following encoding for each shadow byte: 0 means that all 8 bytes
+of the corresponding memory region are accessible; number N (1 <= N <= 7) means
+that the first N bytes are accessible, and other (8 - N) bytes are not;
+any negative value indicates that the entire 8-byte word is inaccessible.
+We use different negative values to distinguish between different kinds of
+inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
+
+In the report above the arrows point to the shadow byte 03, which means that
+the accessed address is partially accessible.
+
+
+2. Implementation details
+========================
+
+From a high level, our approach to memory error detection is similar to that
+of kmemcheck: use shadow memory to record whether each byte of memory is safe
+to access, and use compile-time instrumentation to check shadow memory on each
+memory access.
+
+AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
+(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
+offset to translate a memory address to its corresponding shadow address.
+
+Here is the function witch translate an address to its corresponding shadow
+address:
+
+static inline void *kasan_mem_to_shadow(const void *addr)
+{
+ return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
+ + KASAN_SHADOW_OFFSET;
+}
+
+where KASAN_SHADOW_SCALE_SHIFT = 3.
+
+Compile-time instrumentation used for checking memory accesses. Compiler inserts
+function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
+access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
+valid or not by checking corresponding shadow memory.
+
+GCC 5.0 has possibility to perform inline instrumentation. Instead of making
+function calls GCC directly inserts the code to check the shadow memory.
+This option significantly enlarges kernel but it gives x1.1-x2 performance
+boost over outline instrumented kernel.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4df73da11adc..bfcb1a62a7b4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -970,6 +970,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
smh Use ARM semihosting calls for early console.
+ s3c2410,<addr>
+ s3c2412,<addr>
+ s3c2440,<addr>
+ s3c6400,<addr>
+ s5pv210,<addr>
+ exynos4210,<addr>
+ Use early console provided by serial driver available
+ on Samsung SoCs, requires selecting proper type and
+ a correct base address of the selected UART port. The
+ serial port must already be setup and configured.
+ Options are not yet supported.
+
earlyprintk= [X86,SH,BLACKFIN,ARM,M68k]
earlyprintk=vga
earlyprintk=efi
@@ -1277,6 +1289,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
+ i8042.kbdreset [HW] Reset device connected to KBD port
i810= [HW,DRM]
@@ -1469,6 +1482,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
no_hwp
Do not enable hardware P state control (HWP)
if available.
+ hwp_only
+ Only load intel_pstate on systems which support
+ hardware P state control (HWP) if available.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
@@ -1493,6 +1509,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
forcesac
soft
pt [x86, IA-64]
+ nobypass [PPC/POWERNV]
+ Disable IOMMU bypass, using IOMMU for PCI devices.
io7= [HW] IO7 for Marvel based alpha systems
@@ -3206,6 +3224,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
retain_initrd [RAM] Keep initrd memory after extraction
+ rfkill.default_state=
+ 0 "airplane mode". All wifi, bluetooth, wimax, gps, fm,
+ etc. communication is blocked by default.
+ 1 Unblocked.
+
+ rfkill.master_switch_mode=
+ 0 The "airplane mode" button does nothing.
+ 1 The "airplane mode" button toggles between everything
+ blocked and the previous configuration.
+ 2 The "airplane mode" button toggles between everything
+ blocked and everything unblocked.
+
rhash_entries= [KNL,NET]
Set number of hash buckets for route cache
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 4227ec2e3ab2..1488b6525eb6 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -702,7 +702,8 @@ a virtual address that is no longer valid (module init sections, module
virtual addresses that correspond to modules that've been unloaded),
such probes are marked with [GONE]. If the probe is temporarily disabled,
such probes are marked with [DISABLED]. If the probe is optimized, it is
-marked with [OPTIMIZED].
+marked with [OPTIMIZED]. If the probe is ftrace-based, it is marked with
+[FTRACE].
/sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
diff --git a/Documentation/locking/00-INDEX b/Documentation/locking/00-INDEX
new file mode 100644
index 000000000000..c256c9bee2a4
--- /dev/null
+++ b/Documentation/locking/00-INDEX
@@ -0,0 +1,16 @@
+00-INDEX
+ - this file.
+lockdep-design.txt
+ - documentation on the runtime locking correctness validator.
+lockstat.txt
+ - info on collecting statistics on locks (and contention).
+mutex-design.txt
+ - info on the generic mutex subsystem.
+rt-mutex-design.txt
+ - description of the RealTime mutex implementation design.
+rt-mutex.txt
+ - desc. of RT-mutex subsystem with PI (Priority Inheritance) support.
+spinlocks.txt
+ - info on using spinlocks to provide exclusive access in kernel.
+ww-mutex-design.txt
+ - Intro to Mutex wait/would deadlock handling.s
diff --git a/Documentation/locking/lockdep-design.txt b/Documentation/locking/lockdep-design.txt
index 5dbc99c04f6e..5001280e9d82 100644
--- a/Documentation/locking/lockdep-design.txt
+++ b/Documentation/locking/lockdep-design.txt
@@ -34,7 +34,7 @@ The validator tracks lock-class usage history into 4n + 1 separate state bits:
- 'ever held with STATE enabled'
- 'ever held as readlock with STATE enabled'
-Where STATE can be either one of (kernel/lockdep_states.h)
+Where STATE can be either one of (kernel/locking/lockdep_states.h)
- hardirq
- softirq
- reclaim_fs
diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt
index 7428773a1e69..568bbbacee91 100644
--- a/Documentation/locking/lockstat.txt
+++ b/Documentation/locking/lockstat.txt
@@ -121,6 +121,11 @@ show the header with column descriptions. Lines 05-18 and 20-31 show the actual
statistics. These statistics come in two parts; the actual stats separated by a
short separator (line 08, 13) from the contention points.
+Lines 09-12 show the first 4 recorded contention points (the code
+which tries to get the lock) and lines 14-17 show the first 4 recorded
+contended points (the lock holder). It is possible that the max
+con-bounces point is missing in the statistics.
+
The first lock (05-18) is a read/write lock, and shows two lines above the
short separator. The contention points don't match the column descriptors,
they have two: contentions and [<IP>] symbol. The second set of contention
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 70a09f8a0383..ca2387ef27ab 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -269,6 +269,50 @@ And there are a number of things that _must_ or _must_not_ be assumed:
STORE *(A + 4) = Y; STORE *A = X;
STORE {*A, *(A + 4) } = {X, Y};
+And there are anti-guarantees:
+
+ (*) These guarantees do not apply to bitfields, because compilers often
+ generate code to modify these using non-atomic read-modify-write
+ sequences. Do not attempt to use bitfields to synchronize parallel
+ algorithms.
+
+ (*) Even in cases where bitfields are protected by locks, all fields
+ in a given bitfield must be protected by one lock. If two fields
+ in a given bitfield are protected by different locks, the compiler's
+ non-atomic read-modify-write sequences can cause an update to one
+ field to corrupt the value of an adjacent field.
+
+ (*) These guarantees apply only to properly aligned and sized scalar
+ variables. "Properly sized" currently means variables that are
+ the same size as "char", "short", "int" and "long". "Properly
+ aligned" means the natural alignment, thus no constraints for
+ "char", two-byte alignment for "short", four-byte alignment for
+ "int", and either four-byte or eight-byte alignment for "long",
+ on 32-bit and 64-bit systems, respectively. Note that these
+ guarantees were introduced into the C11 standard, so beware when
+ using older pre-C11 compilers (for example, gcc 4.6). The portion
+ of the standard containing this guarantee is Section 3.14, which
+ defines "memory location" as follows:
+
+ memory location
+ either an object of scalar type, or a maximal sequence
+ of adjacent bit-fields all having nonzero width
+
+ NOTE 1: Two threads of execution can update and access
+ separate memory locations without interfering with
+ each other.
+
+ NOTE 2: A bit-field and an adjacent non-bit-field member
+ are in separate memory locations. The same applies
+ to two bit-fields, if one is declared inside a nested
+ structure declaration and the other is not, or if the two
+ are separated by a zero-length bit-field declaration,
+ or if they are separated by a non-bit-field member
+ declaration. It is not safe to concurrently update two
+ bit-fields in the same structure if all members declared
+ between them are also bit-fields, no matter what the
+ sizes of those intervening bit-fields happen to be.
+
=========================
WHAT ARE MEMORY BARRIERS?
@@ -750,7 +794,7 @@ In summary:
However, they do -not- guarantee any other sort of ordering:
Not prior loads against later loads, nor prior stores against
later anything. If you need these other forms of ordering,
- use smb_rmb(), smp_wmb(), or, in the case of prior stores and
+ use smp_rmb(), smp_wmb(), or, in the case of prior stores and
later loads, smp_mb().
(*) If both legs of the "if" statement begin with identical stores
diff --git a/Documentation/misc-devices/mei/mei-client-bus.txt b/Documentation/misc-devices/mei/mei-client-bus.txt
index f83910a8ce76..743be4ec8989 100644
--- a/Documentation/misc-devices/mei/mei-client-bus.txt
+++ b/Documentation/misc-devices/mei/mei-client-bus.txt
@@ -1,9 +1,10 @@
Intel(R) Management Engine (ME) Client bus API
-===============================================
+==============================================
Rationale
=========
+
MEI misc character device is useful for dedicated applications to send and receive
data to the many FW appliance found in Intel's ME from the user space.
However for some of the ME functionalities it make sense to leverage existing software
@@ -17,7 +18,8 @@ the existing code.
MEI CL bus API
-===========
+==============
+
A driver implementation for an MEI Client is very similar to existing bus
based device drivers. The driver registers itself as an MEI CL bus driver through
the mei_cl_driver structure:
@@ -55,6 +57,7 @@ received buffers.
Example
=======
+
As a theoretical example let's pretend the ME comes with a "contact" NFC IP.
The driver init and exit routines for this device would look like:
@@ -69,11 +72,11 @@ static struct mei_cl_device_id contact_mei_cl_tbl[] = {
MODULE_DEVICE_TABLE(mei_cl, contact_mei_cl_tbl);
static struct mei_cl_driver contact_driver = {
- .id_table = contact_mei_tbl,
- .name = CONTACT_DRIVER_NAME,
+ .id_table = contact_mei_tbl,
+ .name = CONTACT_DRIVER_NAME,
- .probe = contact_probe,
- .remove = contact_remove,
+ .probe = contact_probe,
+ .remove = contact_remove,
};
static int contact_init(void)
@@ -109,7 +112,7 @@ int contact_probe(struct mei_cl_device *dev, struct mei_cl_device_id *id)
mei_cl_register_event_cb(dev, contact_event_cb, contact);
return 0;
- }
+}
In the probe routine the driver first enable the MEI device and then registers
an ME bus event handler which is as close as it can get to registering a
diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt
index 15bba1aeba9a..8d47501bba0a 100644
--- a/Documentation/misc-devices/mei/mei.txt
+++ b/Documentation/misc-devices/mei/mei.txt
@@ -1,8 +1,8 @@
Intel(R) Management Engine Interface (Intel(R) MEI)
-=======================
+===================================================
Introduction
-=======================
+============
The Intel Management Engine (Intel ME) is an isolated and protected computing
resource (Co-processor) residing inside certain Intel chipsets. The Intel ME
@@ -19,7 +19,7 @@ each client has its own protocol. The protocol is message-based with a
header and payload up to 512 bytes.
Prominent usage of the Intel ME Interface is to communicate with Intel(R)
-Active Management Technology (Intel AMT)implemented in firmware running on
+Active Management Technology (Intel AMT) implemented in firmware running on
the Intel ME.
Intel AMT provides the ability to manage a host remotely out-of-band (OOB)
@@ -44,8 +44,9 @@ HTTP/S that are received from a remote management console application.
For more information about Intel AMT:
http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
+
Intel MEI Driver
-=======================
+================
The driver exposes a misc device called /dev/mei.
@@ -91,8 +92,10 @@ A code snippet for an application communicating with Intel AMTHI client:
[...]
close(fd);
-IOCTL:
-======
+
+IOCTL
+=====
+
The Intel MEI Driver supports the following IOCTL command:
IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client).
@@ -122,58 +125,61 @@ The Intel MEI Driver supports the following IOCTL command:
data that can be sent or received. (e.g. if MTU=2K, can send
requests up to bytes 2k and received responses up to 2k bytes).
-Intel ME Applications:
-==============
-
-1) Intel Local Management Service (Intel LMS)
-
- Applications running locally on the platform communicate with Intel AMT Release
- 2.0 and later releases in the same way that network applications do via SOAP
- over HTTP (deprecated starting with Release 6.0) or with WS-Management over
- SOAP over HTTP. This means that some Intel AMT features can be accessed from a
- local application using the same network interface as a remote application
- communicating with Intel AMT over the network.
-
- When a local application sends a message addressed to the local Intel AMT host
- name, the Intel LMS, which listens for traffic directed to the host name,
- intercepts the message and routes it to the Intel MEI.
- For more information:
- http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
- Under "About Intel AMT" => "Local Access"
-
- For downloading Intel LMS:
- http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
-
- The Intel LMS opens a connection using the Intel MEI driver to the Intel LMS
- firmware feature using a defined UUID and then communicates with the feature
- using a protocol called Intel AMT Port Forwarding Protocol(Intel APF protocol).
- The protocol is used to maintain multiple sessions with Intel AMT from a
- single application.
-
- See the protocol specification in the Intel AMT Software Development Kit(SDK)
- http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
- Under "SDK Resources" => "Intel(R) vPro(TM) Gateway(MPS)"
- => "Information for Intel(R) vPro(TM) Gateway Developers"
- => "Description of the Intel AMT Port Forwarding (APF)Protocol"
-
- 2) Intel AMT Remote configuration using a Local Agent
- A Local Agent enables IT personnel to configure Intel AMT out-of-the-box
- without requiring installing additional data to enable setup. The remote
- configuration process may involve an ISV-developed remote configuration
- agent that runs on the host.
- For more information:
- http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
- Under "Setup and Configuration of Intel AMT" =>
- "SDK Tools Supporting Setup and Configuration" =>
- "Using the Local Agent Sample"
-
- An open source Intel AMT configuration utility, implementing a local agent
- that accesses the Intel MEI driver, can be found here:
- http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
-
-
-Intel AMT OS Health Watchdog:
-=============================
+
+Intel ME Applications
+=====================
+
+ 1) Intel Local Management Service (Intel LMS)
+
+ Applications running locally on the platform communicate with Intel AMT Release
+ 2.0 and later releases in the same way that network applications do via SOAP
+ over HTTP (deprecated starting with Release 6.0) or with WS-Management over
+ SOAP over HTTP. This means that some Intel AMT features can be accessed from a
+ local application using the same network interface as a remote application
+ communicating with Intel AMT over the network.
+
+ When a local application sends a message addressed to the local Intel AMT host
+ name, the Intel LMS, which listens for traffic directed to the host name,
+ intercepts the message and routes it to the Intel MEI.
+ For more information:
+ http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
+ Under "About Intel AMT" => "Local Access"
+
+ For downloading Intel LMS:
+ http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
+
+ The Intel LMS opens a connection using the Intel MEI driver to the Intel LMS
+ firmware feature using a defined UUID and then communicates with the feature
+ using a protocol called Intel AMT Port Forwarding Protocol (Intel APF protocol).
+ The protocol is used to maintain multiple sessions with Intel AMT from a
+ single application.
+
+ See the protocol specification in the Intel AMT Software Development Kit (SDK)
+ http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
+ Under "SDK Resources" => "Intel(R) vPro(TM) Gateway (MPS)"
+ => "Information for Intel(R) vPro(TM) Gateway Developers"
+ => "Description of the Intel AMT Port Forwarding (APF) Protocol"
+
+ 2) Intel AMT Remote configuration using a Local Agent
+
+ A Local Agent enables IT personnel to configure Intel AMT out-of-the-box
+ without requiring installing additional data to enable setup. The remote
+ configuration process may involve an ISV-developed remote configuration
+ agent that runs on the host.
+ For more information:
+ http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
+ Under "Setup and Configuration of Intel AMT" =>
+ "SDK Tools Supporting Setup and Configuration" =>
+ "Using the Local Agent Sample"
+
+ An open source Intel AMT configuration utility, implementing a local agent
+ that accesses the Intel MEI driver, can be found here:
+ http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
+
+
+Intel AMT OS Health Watchdog
+============================
+
The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
Whenever the OS hangs or crashes, Intel AMT will send an event
to any subscriber to this event. This mechanism means that
@@ -192,8 +198,10 @@ watchdog is 120 seconds.
If the Intel AMT Watchdog feature does not exist (i.e. the connection failed),
the Intel MEI driver will disable the sending of heartbeats.
-Supported Chipsets:
+
+Supported Chipsets
==================
+
7 Series Chipset Family
6 Series Chipset Family
5 Series Chipset Family
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 557b6ef70c26..df27a1a50776 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -1,7 +1,5 @@
00-INDEX
- this file
-3c505.txt
- - information on the 3Com EtherLink Plus (3c505) driver.
3c509.txt
- information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
@@ -24,6 +22,8 @@ README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- info on using alias network devices.
+altera_tse.txt
+ - Altera Triple-Speed Ethernet controller.
arcnet-hardware.txt
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
arcnet.txt
@@ -42,6 +42,8 @@ bridge.txt
- where to get user space programs for ethernet bridging with Linux.
can.txt
- documentation on CAN protocol family.
+cdc_mbim.txt
+ - 3G/LTE USB modem (Mobile Broadband Interface Model)
cops.txt
- info on the COPS LocalTalk Linux driver
cs89x0.txt
@@ -54,6 +56,8 @@ cxgb.txt
- Release Notes for the Chelsio N210 Linux device driver.
dccp.txt
- the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42).
+dctcp.txt
+ - DataCenter TCP congestion control
de4x5.txt
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
decnet.txt
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 2236d6dcb7da..0a2859a8ee7e 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -234,7 +234,7 @@ solution for a couple of reasons:
mechanisms. Inside this filter definition the (interested) type of
errors may be selected. The reception of error messages is disabled
by default. The format of the CAN error message frame is briefly
- described in the Linux header file "include/linux/can/error.h".
+ described in the Linux header file "include/uapi/linux/can/error.h".
4. How to use SocketCAN
------------------------
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index 58d08f8d8d80..9930ecfbb465 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -279,8 +279,8 @@ Possible BPF extensions are shown in the following table:
hatype skb->dev->type
rxhash skb->hash
cpu raw_smp_processor_id()
- vlan_tci vlan_tx_tag_get(skb)
- vlan_pr vlan_tx_tag_present(skb)
+ vlan_tci skb_vlan_tag_get(skb)
+ vlan_pr skb_vlan_tag_present(skb)
rand prandom_u32()
These extensions can also be prefixed with '#'.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 9bffdfc648dc..1b8c964b0d17 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
+ From linux kernel 3.6 onwards, this is deprecated for ipv4
+ as route cache is no longer used.
neigh/default/gc_thresh1 - INTEGER
Minimum number of entries to keep. Garbage collector will not
@@ -288,6 +290,28 @@ tcp_frto - INTEGER
By default it's enabled with a non-zero value. 0 disables F-RTO.
+tcp_invalid_ratelimit - INTEGER
+ Limit the maximal rate for sending duplicate acknowledgments
+ in response to incoming TCP packets that are for an existing
+ connection but that are invalid due to any of these reasons:
+
+ (a) out-of-window sequence number,
+ (b) out-of-window acknowledgment number, or
+ (c) PAWS (Protection Against Wrapped Sequence numbers) check failure
+
+ This can help mitigate simple "ack loop" DoS attacks, wherein
+ a buggy or malicious middlebox or man-in-the-middle can
+ rewrite TCP header fields in manner that causes each endpoint
+ to think that the other is sending invalid TCP segments, thus
+ causing each side to send an unterminating stream of duplicate
+ acknowledgments for invalid segments.
+
+ Using 0 disables rate-limiting of dupacks in response to
+ invalid segments; otherwise this value specifies the minimal
+ space between sending such dupacks, in milliseconds.
+
+ Default: 500 (milliseconds).
+
tcp_keepalive_time - INTEGER
How often TCP sends out keepalive messages when keepalive is enabled.
Default: 2hours.
@@ -1285,6 +1309,13 @@ accept_ra_rtr_pref - BOOLEAN
Functional default: enabled if accept_ra is enabled.
disabled if accept_ra is disabled.
+accept_ra_mtu - BOOLEAN
+ Apply the MTU value specified in RA option 5 (RFC4861). If
+ disabled, the MTU specified in the RA will be ignored.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
accept_redirects - BOOLEAN
Accept Redirects.
diff --git a/Documentation/networking/netlink_mmap.txt b/Documentation/networking/netlink_mmap.txt
index c6af4bac5aa8..54f10478e8e3 100644
--- a/Documentation/networking/netlink_mmap.txt
+++ b/Documentation/networking/netlink_mmap.txt
@@ -199,16 +199,9 @@ frame header.
TX limitations
--------------
-Kernel processing usually involves validation of the message received by
-user-space, then processing its contents. The kernel must assure that
-userspace is not able to modify the message contents after they have been
-validated. In order to do so, the message is copied from the ring frame
-to an allocated buffer if either of these conditions is false:
-
-- only a single mapping of the ring exists
-- the file descriptor is not shared between processes
-
-This means that for threaded programs, the kernel will fall back to copying.
+As of Jan 2015 the message is always copied from the ring frame to an
+allocated buffer due to unresolved security concerns.
+See commit 4682a0358639b29cf ("netlink: Always copy on mmap TX.").
Example
-------
diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt
index 70da5086153d..f55599c62c9d 100644
--- a/Documentation/networking/nf_conntrack-sysctl.txt
+++ b/Documentation/networking/nf_conntrack-sysctl.txt
@@ -11,7 +11,8 @@ nf_conntrack_buckets - INTEGER (read-only)
Size of hash table. If not specified as parameter during module
loading, the default size is calculated by dividing total memory
by 16384 to determine the number of buckets but the hash table will
- never have fewer than 32 or more than 16384 buckets.
+ never have fewer than 32 and limited to 16384 buckets. For systems
+ with more than 4GB of memory it will be 65536 buckets.
nf_conntrack_checksum - BOOLEAN
0 - disabled
diff --git a/Documentation/networking/openvswitch.txt b/Documentation/networking/openvswitch.txt
index 37c20ee2455e..b3b9ac61d29d 100644
--- a/Documentation/networking/openvswitch.txt
+++ b/Documentation/networking/openvswitch.txt
@@ -131,6 +131,19 @@ performs best-effort detection of overlapping wildcarded flows and may reject
some but not all of them. However, this behavior may change in future versions.
+Unique flow identifiers
+-----------------------
+
+An alternative to using the original match portion of a key as the handle for
+flow identification is a unique flow identifier, or "UFID". UFIDs are optional
+for both the kernel and user space program.
+
+User space programs that support UFID are expected to provide it during flow
+setup in addition to the flow, then refer to the flow using the UFID for all
+future operations. The kernel is not required to index flows by the original
+flow key if a UFID is specified.
+
+
Basic rule for evolving flow keys
---------------------------------
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index a5c784c89312..5f0922613f1a 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -162,6 +162,27 @@ SOF_TIMESTAMPING_OPT_CMSG:
option IP_PKTINFO simultaneously.
+SOF_TIMESTAMPING_OPT_TSONLY:
+
+ Applies to transmit timestamps only. Makes the kernel return the
+ timestamp as a cmsg alongside an empty packet, as opposed to
+ alongside the original packet. This reduces the amount of memory
+ charged to the socket's receive budget (SO_RCVBUF) and delivers
+ the timestamp even if sysctl net.core.tstamp_allow_data is 0.
+ This option disables SOF_TIMESTAMPING_OPT_CMSG.
+
+
+New applications are encouraged to pass SOF_TIMESTAMPING_OPT_ID to
+disambiguate timestamps and SOF_TIMESTAMPING_OPT_TSONLY to operate
+regardless of the setting of sysctl net.core.tstamp_allow_data.
+
+An exception is when a process needs additional cmsg data, for
+instance SOL_IP/IP_PKTINFO to detect the egress network interface.
+Then pass option SOF_TIMESTAMPING_OPT_CMSG. This option depends on
+having access to the contents of the original packet, so cannot be
+combined with SOF_TIMESTAMPING_OPT_TSONLY.
+
+
1.4 Bytestream Timestamps
The SO_TIMESTAMPING interface supports timestamping of bytes in a
diff --git a/Documentation/networking/timestamping/txtimestamp.c b/Documentation/networking/timestamping/txtimestamp.c
index 876f71c5625a..8217510d3842 100644
--- a/Documentation/networking/timestamping/txtimestamp.c
+++ b/Documentation/networking/timestamping/txtimestamp.c
@@ -30,6 +30,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#define _GNU_SOURCE
+
#include <arpa/inet.h>
#include <asm/types.h>
#include <error.h>
@@ -59,14 +61,6 @@
#include <time.h>
#include <unistd.h>
-/* ugly hack to work around netinet/in.h and linux/ipv6.h conflicts */
-#ifndef in6_pktinfo
-struct in6_pktinfo {
- struct in6_addr ipi6_addr;
- int ipi6_ifindex;
-};
-#endif
-
/* command line parameters */
static int cfg_proto = SOCK_STREAM;
static int cfg_ipproto = IPPROTO_TCP;
@@ -76,6 +70,7 @@ static int do_ipv6 = 1;
static int cfg_payload_len = 10;
static bool cfg_show_payload;
static bool cfg_do_pktinfo;
+static bool cfg_loop_nodata;
static uint16_t dest_port = 9000;
static struct sockaddr_in daddr;
@@ -147,6 +142,9 @@ static void print_payload(char *data, int len)
{
int i;
+ if (!len)
+ return;
+
if (len > 70)
len = 70;
@@ -183,6 +181,7 @@ static void __recv_errmsg_cmsg(struct msghdr *msg, int payload_len)
struct sock_extended_err *serr = NULL;
struct scm_timestamping *tss = NULL;
struct cmsghdr *cm;
+ int batch = 0;
for (cm = CMSG_FIRSTHDR(msg);
cm && cm->cmsg_len;
@@ -215,10 +214,18 @@ static void __recv_errmsg_cmsg(struct msghdr *msg, int payload_len)
} else
fprintf(stderr, "unknown cmsg %d,%d\n",
cm->cmsg_level, cm->cmsg_type);
+
+ if (serr && tss) {
+ print_timestamp(tss, serr->ee_info, serr->ee_data,
+ payload_len);
+ serr = NULL;
+ tss = NULL;
+ batch++;
+ }
}
- if (serr && tss)
- print_timestamp(tss, serr->ee_info, serr->ee_data, payload_len);
+ if (batch > 1)
+ fprintf(stderr, "batched %d timestamps\n", batch);
}
static int recv_errmsg(int fd)
@@ -250,7 +257,7 @@ static int recv_errmsg(int fd)
if (ret == -1 && errno != EAGAIN)
error(1, errno, "recvmsg");
- if (ret > 0) {
+ if (ret >= 0) {
__recv_errmsg_cmsg(&msg, ret);
if (cfg_show_payload)
print_payload(data, cfg_payload_len);
@@ -315,6 +322,9 @@ static void do_test(int family, unsigned int opt)
opt |= SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_OPT_CMSG |
SOF_TIMESTAMPING_OPT_ID;
+ if (cfg_loop_nodata)
+ opt |= SOF_TIMESTAMPING_OPT_TSONLY;
+
if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING,
(char *) &opt, sizeof(opt)))
error(1, 0, "setsockopt timestamping");
@@ -384,6 +394,7 @@ static void __attribute__((noreturn)) usage(const char *filepath)
" -h: show this message\n"
" -I: request PKTINFO\n"
" -l N: send N bytes at a time\n"
+ " -n: set no-payload option\n"
" -r: use raw\n"
" -R: use raw (IP_HDRINCL)\n"
" -p N: connect to port N\n"
@@ -398,7 +409,7 @@ static void parse_opt(int argc, char **argv)
int proto_count = 0;
char c;
- while ((c = getopt(argc, argv, "46hIl:p:rRux")) != -1) {
+ while ((c = getopt(argc, argv, "46hIl:np:rRux")) != -1) {
switch (c) {
case '4':
do_ipv6 = 0;
@@ -409,6 +420,9 @@ static void parse_opt(int argc, char **argv)
case 'I':
cfg_do_pktinfo = true;
break;
+ case 'n':
+ cfg_loop_nodata = true;
+ break;
case 'r':
proto_count++;
cfg_proto = SOCK_RAW;
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
index 8e1ddec2c78a..ae57b9ea0d41 100644
--- a/Documentation/nommu-mmap.txt
+++ b/Documentation/nommu-mmap.txt
@@ -43,12 +43,12 @@ and it's also much more restricted in the latter case:
even if this was created by another process.
- If possible, the file mapping will be directly on the backing device
- if the backing device has the BDI_CAP_MAP_DIRECT capability and
+ if the backing device has the NOMMU_MAP_DIRECT capability and
appropriate mapping protection capabilities. Ramfs, romfs, cramfs
and mtd might all permit this.
- If the backing device device can't or won't permit direct sharing,
- but does have the BDI_CAP_MAP_COPY capability, then a copy of the
+ but does have the NOMMU_MAP_COPY capability, then a copy of the
appropriate bit of the file will be read into a contiguous bit of
memory and any extraneous space beyond the EOF will be cleared
@@ -220,7 +220,7 @@ directly (can't be copied).
The file->f_op->mmap() operation will be called to actually inaugurate the
mapping. It can be rejected at that point. Returning the ENOSYS error will
-cause the mapping to be copied instead if BDI_CAP_MAP_COPY is specified.
+cause the mapping to be copied instead if NOMMU_MAP_COPY is specified.
The vm_ops->close() routine will be invoked when the last mapping on a chardev
is removed. An existing mapping will be shared, partially or not, if possible
@@ -232,7 +232,7 @@ want to handle it, despite the fact it's got an operation. For instance, it
might try directing the call to a secondary driver which turns out not to
implement it. Such is the case for the framebuffer driver which attempts to
direct the call to the device-specific driver. Under such circumstances, the
-mapping request will be rejected if BDI_CAP_MAP_COPY is not specified, and a
+mapping request will be rejected if NOMMU_MAP_COPY is not specified, and a
copy mapped otherwise.
IMPORTANT NOTE:
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index beefb9f82902..f3ac05cc23e4 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -270,6 +270,8 @@ characters, each representing a particular tainted value.
15: 'L' if a soft lockup has previously occurred on the system.
+ 16: 'K' if the kernel has been live patched.
+
The primary reason for the 'Tainted: ' string is to tell kernel
debuggers if this is a clean kernel or if anything unusual has
occurred. Tainting is permanent: even if an offending module is
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 1bdfa0443773..4685aee197fd 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -69,6 +69,10 @@ Reason for this is that the RTC is the only reliably available piece of
hardware during resume operations where a value can be set that will
survive a reboot.
+pm_trace is not compatible with asynchronous suspend, so it turns
+asynchronous suspend off (which may work around timing or
+ordering-sensitive bugs).
+
Consequence is that after a resume (even if it is successful) your system
clock will have a value corresponding to the magic number instead of the
correct date/time! It is therefore advisable to use a program like ntp-date
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 427e89712f4a..2ee6ef9a6554 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -25,6 +25,9 @@ whether they can be changed or not:
- soft block: writable radio block (need not be readable) that is set by
the system software.
+The rfkill subsystem has two parameters, rfkill.default_state and
+rfkill.master_switch_mode, which are documented in kernel-parameters.txt.
+
2. Implementation details
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 08911b5c6b0e..3df8babcdc41 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -1,14 +1,14 @@
-
- Debugging on Linux for s/390 & z/Architecture
- by
- Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
- Best viewed with fixed width fonts
+
+ Debugging on Linux for s/390 & z/Architecture
+ by
+ Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ Best viewed with fixed width fonts
Overview of Document:
=====================
-This document is intended to give a good overview of how to debug
-Linux for s/390 & z/Architecture. It isn't intended as a complete reference & not a
+This document is intended to give a good overview of how to debug Linux for
+s/390 and z/Architecture. It is not intended as a complete reference and not a
tutorial on the fundamentals of C & assembly. It doesn't go into
390 IO in any detail. It is intended to complement the documents in the
reference section below & any other worthwhile references you get.
@@ -35,7 +35,6 @@ Examining core dumps
ldd
Debugging modules
The proc file system
-Starting points for debugging scripting languages etc.
SysRq
References
Special Thanks
@@ -44,18 +43,20 @@ Register Set
============
The current architectures have the following registers.
-16 General propose registers, 32 bit on s/390 64 bit on z/Architecture, r0-r15 or gpr0-gpr15 used for arithmetic & addressing.
-
-16 Control registers, 32 bit on s/390 64 bit on z/Architecture, ( cr0-cr15 kernel usage only ) used for memory management,
-interrupt control,debugging control etc.
-
-16 Access registers ( ar0-ar15 ) 32 bit on s/390 & z/Architecture
-not used by normal programs but potentially could
-be used as temporary storage. Their main purpose is their 1 to 1
-association with general purpose registers and are used in
-the kernel for copying data between kernel & user address spaces.
-Access register 0 ( & access register 1 on z/Architecture ( needs 64 bit
-pointer ) ) is currently used by the pthread library as a pointer to
+16 General propose registers, 32 bit on s/390 and 64 bit on z/Architecture,
+r0-r15 (or gpr0-gpr15), used for arithmetic and addressing.
+
+16 Control registers, 32 bit on s/390 and 64 bit on z/Architecture, cr0-cr15,
+kernel usage only, used for memory management, interrupt control, debugging
+control etc.
+
+16 Access registers (ar0-ar15), 32 bit on both s/390 and z/Architecture,
+normally not used by normal programs but potentially could be used as
+temporary storage. These registers have a 1:1 association with general
+purpose registers and are designed to be used in the so-called access
+register mode to select different address spaces.
+Access register 0 (and access register 1 on z/Architecture, which needs a
+64 bit pointer) is currently used by the pthread library as a pointer to
the current running threads private area.
16 64 bit floating point registers (fp0-fp15 ) IEEE & HFP floating
@@ -90,18 +91,19 @@ s/390 z/Architecture
6 6 Input/Output interrupt Mask
-7 7 External interrupt Mask used primarily for interprocessor signalling &
- clock interrupts.
+7 7 External interrupt Mask used primarily for interprocessor
+ signalling and clock interrupts.
-8-11 8-11 PSW Key used for complex memory protection mechanism not used under linux
+8-11 8-11 PSW Key used for complex memory protection mechanism
+ (not used under linux)
12 12 1 on s/390 0 on z/Architecture
13 13 Machine Check Mask 1=enable machine check interrupts
-14 14 Wait State set this to 1 to stop the processor except for interrupts & give
- time to other LPARS used in CPU idle in the kernel to increase overall
- usage of processor resources.
+14 14 Wait State. Set this to 1 to stop the processor except for
+ interrupts and give time to other LPARS. Used in CPU idle in
+ the kernel to increase overall usage of processor resources.
15 15 Problem state ( if set to 1 certain instructions are disabled )
all linux user programs run with this bit 1
@@ -165,21 +167,23 @@ s/390 z/Architecture
when loading the address with LPSWE otherwise a
specification exception occurs, LPSW is fully backward
compatible.
-
-
+
+
Prefix Page(s)
---------------
+--------------
This per cpu memory area is too intimately tied to the processor not to mention.
-It exists between the real addresses 0-4096 on s/390 & 0-8192 z/Architecture & is exchanged
-with a 1 page on s/390 or 2 pages on z/Architecture in absolute storage by the set
-prefix instruction in linux'es startup.
-This page is mapped to a different prefix for each processor in an SMP configuration
-( assuming the os designer is sane of course :-) ).
-Bytes 0-512 ( 200 hex ) on s/390 & 0-512,4096-4544,4604-5119 currently on z/Architecture
-are used by the processor itself for holding such information as exception indications &
-entry points for exceptions.
-Bytes after 0xc00 hex are used by linux for per processor globals on s/390 & z/Architecture
-( there is a gap on z/Architecture too currently between 0xc00 & 1000 which linux uses ).
+It exists between the real addresses 0-4096 on s/390 and between 0-8192 on
+z/Architecture and is exchanged with one page on s/390 or two pages on
+z/Architecture in absolute storage by the set prefix instruction during Linux
+startup.
+This page is mapped to a different prefix for each processor in an SMP
+configuration (assuming the OS designer is sane of course).
+Bytes 0-512 (200 hex) on s/390 and 0-512, 4096-4544, 4604-5119 currently on
+z/Architecture are used by the processor itself for holding such information
+as exception indications and entry points for exceptions.
+Bytes after 0xc00 hex are used by linux for per processor globals on s/390 and
+z/Architecture (there is a gap on z/Architecture currently between 0xc00 and
+0x1000, too, which is used by Linux).
The closest thing to this on traditional architectures is the interrupt
vector table. This is a good thing & does simplify some of the kernel coding
however it means that we now cannot catch stray NULL pointers in the
@@ -192,26 +196,26 @@ Address Spaces on Intel Linux
The traditional Intel Linux is approximately mapped as follows forgive
the ascii art.
-0xFFFFFFFF 4GB Himem *****************
- * *
- * Kernel Space *
- * *
- ***************** ****************
-User Space Himem (typically 0xC0000000 3GB )* User Stack * * *
- ***************** * *
- * Shared Libs * * Next Process *
- ***************** * to *
- * * <== * Run * <==
- * User Program * * *
- * Data BSS * * *
- * Text * * *
- * Sections * * *
-0x00000000 ***************** ****************
-
-Now it is easy to see that on Intel it is quite easy to recognise a kernel address
-as being one greater than user space himem ( in this case 0xC0000000).
-& addresses of less than this are the ones in the current running program on this
-processor ( if an smp box ).
+0xFFFFFFFF 4GB Himem *****************
+ * *
+ * Kernel Space *
+ * *
+ ***************** ****************
+User Space Himem * User Stack * * *
+(typically 0xC0000000 3GB ) ***************** * *
+ * Shared Libs * * Next Process *
+ ***************** * to *
+ * * <== * Run * <==
+ * User Program * * *
+ * Data BSS * * *
+ * Text * * *
+ * Sections * * *
+0x00000000 ***************** ****************
+
+Now it is easy to see that on Intel it is quite easy to recognise a kernel
+address as being one greater than user space himem (in this case 0xC0000000),
+and addresses of less than this are the ones in the current running program on
+this processor (if an smp box).
If using the virtual machine ( VM ) as a debugger it is quite difficult to
know which user process is running as the address space you are looking at
could be from any process in the run queue.
@@ -247,8 +251,8 @@ Our addressing scheme is basically as follows:
Himem 0x7fffffff 2GB on s/390 ***************** ****************
currently 0x3ffffffffff (2^42)-1 * User Stack * * *
on z/Architecture. ***************** * *
- * Shared Libs * * *
- ***************** * *
+ * Shared Libs * * *
+ ***************** * *
* * * Kernel *
* User Program * * *
* Data BSS * * *
@@ -301,10 +305,10 @@ Virtual Addresses on s/390 & z/Architecture
===========================================
A virtual address on s/390 is made up of 3 parts
-The SX ( segment index, roughly corresponding to the PGD & PMD in linux terminology )
-being bits 1-11.
-The PX ( page index, corresponding to the page table entry (pte) in linux terminology )
-being bits 12-19.
+The SX (segment index, roughly corresponding to the PGD & PMD in Linux
+terminology) being bits 1-11.
+The PX (page index, corresponding to the page table entry (pte) in Linux
+terminology) being bits 12-19.
The remaining bits BX (the byte index are the offset in the page )
i.e. bits 20 to 31.
@@ -368,9 +372,9 @@ each processor as follows.
* ( 8K ) *
16K aligned ************************
-What this means is that we don't need to dedicate any register or global variable
-to point to the current running process & can retrieve it with the following
-very simple construct for s/390 & one very similar for z/Architecture.
+What this means is that we don't need to dedicate any register or global
+variable to point to the current running process & can retrieve it with the
+following very simple construct for s/390 & one very similar for z/Architecture.
static inline struct task_struct * get_current(void)
{
@@ -403,8 +407,8 @@ Note: To follow stackframes requires a knowledge of C or Pascal &
limited knowledge of one assembly language.
It should be noted that there are some differences between the
-s/390 & z/Architecture stack layouts as the z/Architecture stack layout didn't have
-to maintain compatibility with older linkage formats.
+s/390 and z/Architecture stack layouts as the z/Architecture stack layout
+didn't have to maintain compatibility with older linkage formats.
Glossary:
---------
@@ -440,7 +444,7 @@ The code generated by the compiler to return to the caller.
frameless-function
A frameless function in Linux for s390 & z/Architecture is one which doesn't
-need more than the register save area ( 96 bytes on s/390, 160 on z/Architecture )
+need more than the register save area (96 bytes on s/390, 160 on z/Architecture)
given to it by the caller.
A frameless function never:
1) Sets up a back chain.
@@ -588,8 +592,8 @@ A sample program with comments.
Comments on the function test
-----------------------------
-1) It didn't need to set up a pointer to the constant pool gpr13 as it isn't used
-( :-( ).
+1) It didn't need to set up a pointer to the constant pool gpr13 as it is not
+used ( :-( ).
2) This is a frameless function & no stack is bought.
3) The compiler was clever enough to recognise that it could return the
value in r2 as well as use it for the passed in parameter ( :-) ).
@@ -743,35 +747,34 @@ Debugging under VM
Notes
-----
Addresses & values in the VM debugger are always hex never decimal
-Address ranges are of the format <HexValue1>-<HexValue2> or <HexValue1>.<HexValue2>
-e.g. The address range 0x2000 to 0x3000 can be described as 2000-3000 or 2000.1000
+Address ranges are of the format <HexValue1>-<HexValue2> or
+<HexValue1>.<HexValue2>
+For example, the address range 0x2000 to 0x3000 can be described as 2000-3000
+or 2000.1000
The VM Debugger is case insensitive.
-VM's strengths are usually other debuggers weaknesses you can get at any resource
-no matter how sensitive e.g. memory management resources,change address translation
-in the PSW. For kernel hacking you will reap dividends if you get good at it.
-
-The VM Debugger displays operators but not operands, probably because some
-of it was written when memory was expensive & the programmer was probably proud that
-it fitted into 2k of memory & the programmers & didn't want to shock hardcore VM'ers by
-changing the interface :-), also the debugger displays useful information on the same line &
-the author of the code probably felt that it was a good idea not to go over
-the 80 columns on the screen.
-
-As some of you are probably in a panic now this isn't as unintuitive as it may seem
-as the 390 instructions are easy to decode mentally & you can make a good guess at a lot
-of them as all the operands are nibble ( half byte aligned ) & if you have an objdump listing
-also it is quite easy to follow, if you don't have an objdump listing keep a copy of
-the s/390 Reference Summary & look at between pages 2 & 7 or alternatively the
-s/390 principles of operation.
+VM's strengths are usually other debuggers weaknesses you can get at any
+resource no matter how sensitive e.g. memory management resources, change
+address translation in the PSW. For kernel hacking you will reap dividends if
+you get good at it.
+
+The VM Debugger displays operators but not operands, and also the debugger
+displays useful information on the same line as the author of the code probably
+felt that it was a good idea not to go over the 80 columns on the screen.
+This isn't as unintuitive as it may seem as the s/390 instructions are easy to
+decode mentally and you can make a good guess at a lot of them as all the
+operands are nibble (half byte aligned).
+So if you have an objdump listing by hand, it is quite easy to follow, and if
+you don't have an objdump listing keep a copy of the s/390 Reference Summary
+or alternatively the s/390 principles of operation next to you.
e.g. even I can guess that
0001AFF8' LR 180F CC 0
is a ( load register ) lr r0,r15
-Also it is very easy to tell the length of a 390 instruction from the 2 most significant
-bits in the instruction ( not that this info is really useful except if you are trying to
-make sense of a hexdump of code ).
+Also it is very easy to tell the length of a 390 instruction from the 2 most
+significant bits in the instruction (not that this info is really useful except
+if you are trying to make sense of a hexdump of code).
Here is a table
Bits Instruction Length
------------------------------------------
@@ -780,9 +783,6 @@ Bits Instruction Length
10 4 Bytes
11 6 Bytes
-
-
-
The debugger also displays other useful info on the same line such as the
addresses being operated on destination addresses of branches & condition codes.
e.g.
@@ -853,8 +853,8 @@ Displaying & modifying Registers
--------------------------------
D G will display all the gprs
Adding a extra G to all the commands is necessary to access the full 64 bit
-content in VM on z/Architecture obviously this isn't required for access registers
-as these are still 32 bit.
+content in VM on z/Architecture. Obviously this isn't required for access
+registers as these are still 32 bit.
e.g. DGG instead of DG
D X will display all the control registers
D AR will display all the access registers
@@ -870,10 +870,11 @@ Displaying Memory
-----------------
To display memory mapped using the current PSW's mapping try
D <range>
-To make VM display a message each time it hits a particular address & continue try
+To make VM display a message each time it hits a particular address and
+continue try
D I<range> will disassemble/display a range of instructions.
ST addr 32 bit word will store a 32 bit aligned address
-D T<range> will display the EBCDIC in an address ( if you are that way inclined )
+D T<range> will display the EBCDIC in an address (if you are that way inclined)
D R<range> will display real addresses ( without DAT ) but with prefixing.
There are other complex options to display if you need to get at say home space
but are in primary space the easiest thing to do is to temporarily
@@ -884,8 +885,8 @@ restore it.
Hints
-----
-If you want to issue a debugger command without halting your virtual machine with the
-PA1 key try prefixing the command with #CP e.g.
+If you want to issue a debugger command without halting your virtual machine
+with the PA1 key try prefixing the command with #CP e.g.
#cp tr i pswa 2000
also suffixing most debugger commands with RUN will cause them not
to stop just display the mnemonic at the current instruction on the console.
@@ -903,9 +904,10 @@ This sends a message to your own console each time do_signal is entered.
script with breakpoints on every kernel procedure, this isn't a good idea
because there are thousands of these routines & VM can only set 255 breakpoints
at a time so you nearly had to spend as long pruning the file down as you would
-entering the msg's by hand ),however, the trick might be useful for a single object file.
-On linux'es 3270 emulator x3270 there is a very useful option under the file ment
-Save Screens In File this is very good of keeping a copy of traces.
+entering the msgs by hand), however, the trick might be useful for a single
+object file. In the 3270 terminal emulator x3270 there is a very useful option
+in the file menu called "Save Screen In File" - this is very good for keeping a
+copy of traces.
From CMS help <command name> will give you online help on a particular command.
e.g.
@@ -920,7 +922,8 @@ SET PF9 IMM B
This does a single step in VM on pressing F8.
SET PF10 ^
This sets up the ^ key.
-which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly into some 3270 consoles.
+which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly
+into some 3270 consoles.
SET PF11 ^-
This types the starting keystrokes for a sysrq see SysRq below.
SET PF12 RETRIEVE
@@ -1014,8 +1017,8 @@ Tracing Program Exceptions
--------------------------
If you get a crash which says something like
illegal operation or specification exception followed by a register dump
-You can restart linux & trace these using the tr prog <range or value> trace option.
-
+You can restart linux & trace these using the tr prog <range or value> trace
+option.
The most common ones you will normally be tracing for is
@@ -1057,9 +1060,10 @@ TR GOTO INITIAL
Tracing linux syscalls under VM
-------------------------------
-Syscalls are implemented on Linux for S390 by the Supervisor call instruction (SVC) there 256
-possibilities of these as the instruction is made up of a 0xA opcode & the second byte being
-the syscall number. They are traced using the simple command.
+Syscalls are implemented on Linux for S390 by the Supervisor call instruction
+(SVC). There 256 possibilities of these as the instruction is made up of a 0xA
+opcode and the second byte being the syscall number. They are traced using the
+simple command:
TR SVC <Optional value or range>
the syscalls are defined in linux/arch/s390/include/asm/unistd.h
e.g. to trace all file opens just do
@@ -1070,12 +1074,12 @@ SMP Specific commands
---------------------
To find out how many cpus you have
Q CPUS displays all the CPU's available to your virtual machine
-To find the cpu that the current cpu VM debugger commands are being directed at do
-Q CPU to change the current cpu VM debugger commands are being directed at do
+To find the cpu that the current cpu VM debugger commands are being directed at
+do Q CPU to change the current cpu VM debugger commands are being directed at do
CPU <desired cpu no>
-On a SMP guest issue a command to all CPUs try prefixing the command with cpu all.
-To issue a command to a particular cpu try cpu <cpu number> e.g.
+On a SMP guest issue a command to all CPUs try prefixing the command with cpu
+all. To issue a command to a particular cpu try cpu <cpu number> e.g.
CPU 01 TR I R 2000.3000
If you are running on a guest with several cpus & you have a IO related problem
& cannot follow the flow of code but you know it isn't smp related.
@@ -1101,10 +1105,10 @@ D TX0.100
Alternatively
=============
-Under older VM debuggers ( I love EBDIC too ) you can use this little program I wrote which
-will convert a command line of hex digits to ascii text which can be compiled under linux &
-you can copy the hex digits from your x3270 terminal to your xterm if you are debugging
-from a linuxbox.
+Under older VM debuggers (I love EBDIC too) you can use following little
+program which converts a command line of hex digits to ascii text. It can be
+compiled under linux and you can copy the hex digits from your x3270 terminal
+to your xterm if you are debugging from a linuxbox.
This is quite useful when looking at a parameter passed in as a text string
under VM ( unless you are good at decoding ASCII in your head ).
@@ -1114,14 +1118,14 @@ TR SVC 5
We have stopped at a breakpoint
000151B0' SVC 0A05 -> 0001909A' CC 0
-D 20.8 to check the SVC old psw in the prefix area & see was it from userspace
-( for the layout of the prefix area consult P18 of the s/390 390 Reference Summary
-if you have it available ).
+D 20.8 to check the SVC old psw in the prefix area and see was it from userspace
+(for the layout of the prefix area consult the "Fixed Storage Locations"
+chapter of the s/390 Reference Summary if you have it available).
V00000020 070C2000 800151B2
The problem state bit wasn't set & it's also too early in the boot sequence
for it to be a userspace SVC if it was we would have to temporarily switch the
-psw to user space addressing so we could get at the first parameter of the open in
-gpr2.
+psw to user space addressing so we could get at the first parameter of the open
+in gpr2.
Next do a
D G2
GPR 2 = 00014CB4
@@ -1208,9 +1212,9 @@ Here are the tricks I use 9 out of 10 times it works pretty well,
When your backchain reaches a dead end
--------------------------------------
-This can happen when an exception happens in the kernel & the kernel is entered twice
-if you reach the NULL pointer at the end of the back chain you should be
-able to sniff further back if you follow the following tricks.
+This can happen when an exception happens in the kernel and the kernel is
+entered twice. If you reach the NULL pointer at the end of the back chain you
+should be able to sniff further back if you follow the following tricks.
1) A kernel address should be easy to recognise since it is in
primary space & the problem state bit isn't set & also
The Hi bit of the address is set.
@@ -1260,8 +1264,8 @@ V000FFFD0 00010400 80010802 8001085A 000FFFA0
our 3rd return address is 8001085A
-as the 04B52002 looks suspiciously like rubbish it is fair to assume that the kernel entry routines
-for the sake of optimisation don't set up a backchain.
+as the 04B52002 looks suspiciously like rubbish it is fair to assume that the
+kernel entry routines for the sake of optimisation don't set up a backchain.
now look at System.map to see if the addresses make any sense.
@@ -1289,67 +1293,75 @@ Congrats you've done your first backchain.
s/390 & z/Architecture IO Overview
==================================
-I am not going to give a course in 390 IO architecture as this would take me quite a
-while & I'm no expert. Instead I'll give a 390 IO architecture summary for Dummies if you have
-the s/390 principles of operation available read this instead. If nothing else you may find a few
-useful keywords in here & be able to use them on a web search engine like altavista to find
-more useful information.
+I am not going to give a course in 390 IO architecture as this would take me
+quite a while and I'm no expert. Instead I'll give a 390 IO architecture
+summary for Dummies. If you have the s/390 principles of operation available
+read this instead. If nothing else you may find a few useful keywords in here
+and be able to use them on a web search engine to find more useful information.
Unlike other bus architectures modern 390 systems do their IO using mostly
-fibre optics & devices such as tapes & disks can be shared between several mainframes,
-also S390 can support up to 65536 devices while a high end PC based system might be choking
-with around 64. Here is some of the common IO terminology
+fibre optics and devices such as tapes and disks can be shared between several
+mainframes. Also S390 can support up to 65536 devices while a high end PC based
+system might be choking with around 64.
-Subchannel:
-This is the logical number most IO commands use to talk to an IO device there can be up to
-0x10000 (65536) of these in a configuration typically there is a few hundred. Under VM
-for simplicity they are allocated contiguously, however on the native hardware they are not
-they typically stay consistent between boots provided no new hardware is inserted or removed.
-Under Linux for 390 we use these as IRQ's & also when issuing an IO command (CLEAR SUBCHANNEL,
-HALT SUBCHANNEL,MODIFY SUBCHANNEL,RESUME SUBCHANNEL,START SUBCHANNEL,STORE SUBCHANNEL &
-TEST SUBCHANNEL ) we use this as the ID of the device we wish to talk to, the most
-important of these instructions are START SUBCHANNEL ( to start IO ), TEST SUBCHANNEL ( to check
-whether the IO completed successfully ), & HALT SUBCHANNEL ( to kill IO ), a subchannel
-can have up to 8 channel paths to a device this offers redundancy if one is not available.
+Here is some of the common IO terminology:
+Subchannel:
+This is the logical number most IO commands use to talk to an IO device. There
+can be up to 0x10000 (65536) of these in a configuration, typically there are a
+few hundred. Under VM for simplicity they are allocated contiguously, however
+on the native hardware they are not. They typically stay consistent between
+boots provided no new hardware is inserted or removed.
+Under Linux for s390 we use these as IRQ's and also when issuing an IO command
+(CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL,
+START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID
+of the device we wish to talk to. The most important of these instructions are
+START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO
+completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have
+up to 8 channel paths to a device, this offers redundancy if one is not
+available.
Device Number:
-This number remains static & Is closely tied to the hardware, there are 65536 of these
-also they are made up of a CHPID ( Channel Path ID, the most significant 8 bits )
-& another lsb 8 bits. These remain static even if more devices are inserted or removed
-from the hardware, there is a 1 to 1 mapping between Subchannels & Device Numbers provided
-devices aren't inserted or removed.
+This number remains static and is closely tied to the hardware. There are 65536
+of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and
+another lsb 8 bits. These remain static even if more devices are inserted or
+removed from the hardware. There is a 1 to 1 mapping between subchannels and
+device numbers, provided devices aren't inserted or removed.
Channel Control Words:
-CCWS are linked lists of instructions initially pointed to by an operation request block (ORB),
-which is initially given to Start Subchannel (SSCH) command along with the subchannel number
-for the IO subsystem to process while the CPU continues executing normal code.
-These come in two flavours, Format 0 ( 24 bit for backward )
-compatibility & Format 1 ( 31 bit ). These are typically used to issue read & write
-( & many other instructions ) they consist of a length field & an absolute address field.
-For each IO typically get 1 or 2 interrupts one for channel end ( primary status ) when the
-channel is idle & the second for device end ( secondary status ) sometimes you get both
-concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt,
-from which you receive an Interruption response block (IRB). If you get channel & device end
-status in the IRB without channel checks etc. your IO probably went okay. If you didn't you
-probably need a doctor to examine the IRB & extended status word etc.
+CCWs are linked lists of instructions initially pointed to by an operation
+request block (ORB), which is initially given to Start Subchannel (SSCH)
+command along with the subchannel number for the IO subsystem to process
+while the CPU continues executing normal code.
+CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and
+Format 1 (31 bit). These are typically used to issue read and write (and many
+other) instructions. They consist of a length field and an absolute address
+field.
+Each IO typically gets 1 or 2 interrupts, one for channel end (primary status)
+when the channel is idle, and the second for device end (secondary status).
+Sometimes you get both concurrently. You check how the IO went on by issuing a
+TEST SUBCHANNEL at each interrupt, from which you receive an Interruption
+response block (IRB). If you get channel and device end status in the IRB
+without channel checks etc. your IO probably went okay. If you didn't you
+probably need to examine the IRB, extended status word etc.
If an error occurs, more sophisticated control units have a facility known as
-concurrent sense this means that if an error occurs Extended sense information will
-be presented in the Extended status word in the IRB if not you have to issue a
-subsequent SENSE CCW command after the test subchannel.
+concurrent sense. This means that if an error occurs Extended sense information
+will be presented in the Extended status word in the IRB. If not you have to
+issue a subsequent SENSE CCW command after the test subchannel.
-TPI( Test pending interrupt) can also be used for polled IO but in multitasking multiprocessor
-systems it isn't recommended except for checking special cases ( i.e. non looping checks for
-pending IO etc. ).
+TPI (Test pending interrupt) can also be used for polled IO, but in
+multitasking multiprocessor systems it isn't recommended except for
+checking special cases (i.e. non looping checks for pending IO etc.).
-Store Subchannel & Modify Subchannel can be used to examine & modify operating characteristics
-of a subchannel ( e.g. channel paths ).
+Store Subchannel and Modify Subchannel can be used to examine and modify
+operating characteristics of a subchannel (e.g. channel paths).
Other IO related Terms:
Sysplex: S390's Clustering Technology
-QDIO: S390's new high speed IO architecture to support devices such as gigabit ethernet,
-this architecture is also designed to be forward compatible with up & coming 64 bit machines.
+QDIO: S390's new high speed IO architecture to support devices such as gigabit
+ethernet, this architecture is also designed to be forward compatible with
+upcoming 64 bit machines.
General Concepts
@@ -1406,37 +1418,40 @@ sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers
Interface (OEMI).
This byte wide Parallel channel path/bus has parity & data on the "Bus" cable
-& control lines on the "Tag" cable. These can operate in byte multiplex mode for
-sharing between several slow devices or burst mode & monopolize the channel for the
-whole burst. Up to 256 devices can be addressed on one of these cables. These cables are
-about one inch in diameter. The maximum unextended length supported by these cables is
-125 Meters but this can be extended up to 2km with a fibre optic channel extended
-such as a 3044. The maximum burst speed supported is 4.5 megabytes per second however
-some really old processors support only transfer rates of 3.0, 2.0 & 1.0 MB/sec.
+and control lines on the "Tag" cable. These can operate in byte multiplex mode
+for sharing between several slow devices or burst mode and monopolize the
+channel for the whole burst. Up to 256 devices can be addressed on one of these
+cables. These cables are about one inch in diameter. The maximum unextended
+length supported by these cables is 125 Meters but this can be extended up to
+2km with a fibre optic channel extended such as a 3044. The maximum burst speed
+supported is 4.5 megabytes per second. However, some really old processors
+support only transfer rates of 3.0, 2.0 & 1.0 MB/sec.
One of these paths can be daisy chained to up to 8 control units.
ESCON if fibre optic it is also called FICON
-Was introduced by IBM in 1990. Has 2 fibre optic cables & uses either leds or lasers
-for communication at a signaling rate of up to 200 megabits/sec. As 10bits are transferred
-for every 8 bits info this drops to 160 megabits/sec & to 18.6 Megabytes/sec once
-control info & CRC are added. ESCON only operates in burst mode.
+Was introduced by IBM in 1990. Has 2 fibre optic cables and uses either leds or
+lasers for communication at a signaling rate of up to 200 megabits/sec. As
+10bits are transferred for every 8 bits info this drops to 160 megabits/sec
+and to 18.6 Megabytes/sec once control info and CRC are added. ESCON only
+operates in burst mode.
-ESCONs typical max cable length is 3km for the led version & 20km for the laser version
-known as XDF ( extended distance facility ). This can be further extended by using an
-ESCON director which triples the above mentioned ranges. Unlike Bus & Tag as ESCON is
-serial it uses a packet switching architecture the standard Bus & Tag control protocol
-is however present within the packets. Up to 256 devices can be attached to each control
-unit that uses one of these interfaces.
+ESCONs typical max cable length is 3km for the led version and 20km for the
+laser version known as XDF (extended distance facility). This can be further
+extended by using an ESCON director which triples the above mentioned ranges.
+Unlike Bus & Tag as ESCON is serial it uses a packet switching architecture,
+the standard Bus & Tag control protocol is however present within the packets.
+Up to 256 devices can be attached to each control unit that uses one of these
+interfaces.
Common 390 Devices include:
Network adapters typically OSA2,3172's,2116's & OSA-E gigabit ethernet adapters,
-Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console ).
+Consoles 3270 & 3215 (a teletype emulated under linux for a line mode console).
DASD's direct access storage devices ( otherwise known as hard disks ).
Tape Drives.
CTC ( Channel to Channel Adapters ),
ESCON or Parallel Cables used as a very high speed serial link
-between 2 machines. We use 2 cables under linux to do a bi-directional serial link.
+between 2 machines.
Debugging IO on s/390 & z/Architecture under VM
@@ -1475,9 +1490,9 @@ or the halt subchannels
or TR HSCH 7C08-7C09
MSCH's ,STSCH's I think you can guess the rest
-Ingo's favourite trick is tracing all the IO's & CCWS & spooling them into the reader of another
-VM guest so he can ftp the logfile back to his own machine.I'll do a small bit of this & give you
- a look at the output.
+A good trick is tracing all the IO's and CCWS and spooling them into the reader
+of another VM guest so he can ftp the logfile back to his own machine. I'll do
+a small bit of this and give you a look at the output.
1) Spool stdout to VM reader
SP PRT TO (another vm guest ) or * for the local vm guest
@@ -1593,8 +1608,8 @@ undisplay : undo's display's
info breakpoints: shows all current breakpoints
-info stack: shows stack back trace ( if this doesn't work too well, I'll show you the
-stacktrace by hand below ).
+info stack: shows stack back trace (if this doesn't work too well, I'll show
+you the stacktrace by hand below).
info locals: displays local variables.
@@ -1619,7 +1634,8 @@ next: like step except this will not step into subroutines
stepi: steps a single machine code instruction.
e.g. stepi 100
-nexti: steps a single machine code instruction but will not step into subroutines.
+nexti: steps a single machine code instruction but will not step into
+subroutines.
finish: will run until exit of the current routine
@@ -1721,7 +1737,8 @@ e.g.
outputs:
$1 = 11
-You might now be thinking that the line above didn't work, something extra had to be done.
+You might now be thinking that the line above didn't work, something extra had
+to be done.
(gdb) call fflush(stdout)
hello world$2 = 0
As an aside the debugger also calls malloc & free under the hood
@@ -1804,26 +1821,17 @@ man gdb or info gdb.
core dumps
----------
What a core dump ?,
-A core dump is a file generated by the kernel ( if allowed ) which contains the registers,
-& all active pages of the program which has crashed.
-From this file gdb will allow you to look at the registers & stack trace & memory of the
-program as if it just crashed on your system, it is usually called core & created in the
-current working directory.
-This is very useful in that a customer can mail a core dump to a technical support department
-& the technical support department can reconstruct what happened.
-Provided they have an identical copy of this program with debugging symbols compiled in &
-the source base of this build is available.
-In short it is far more useful than something like a crash log could ever hope to be.
-
-In theory all that is missing to restart a core dumped program is a kernel patch which
-will do the following.
-1) Make a new kernel task structure
-2) Reload all the dumped pages back into the kernel's memory management structures.
-3) Do the required clock fixups
-4) Get all files & network connections for the process back into an identical state ( really difficult ).
-5) A few more difficult things I haven't thought of.
-
-
+A core dump is a file generated by the kernel (if allowed) which contains the
+registers and all active pages of the program which has crashed.
+From this file gdb will allow you to look at the registers, stack trace and
+memory of the program as if it just crashed on your system. It is usually
+called core and created in the current working directory.
+This is very useful in that a customer can mail a core dump to a technical
+support department and the technical support department can reconstruct what
+happened. Provided they have an identical copy of this program with debugging
+symbols compiled in and the source base of this build is available.
+In short it is far more useful than something like a crash log could ever hope
+to be.
Why have I never seen one ?.
Probably because you haven't used the command
@@ -1868,7 +1876,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
#3 0x5167e6 in readline_internal_char () at readline.c:454
#4 0x5168ee in readline_internal_charloop () at readline.c:507
#5 0x51692c in readline_internal () at readline.c:521
-#6 0x5164fe in readline (prompt=0x7ffff810 "\177ÿøx\177ÿ÷Ø\177ÿøxÀ")
+#6 0x5164fe in readline (prompt=0x7ffff810)
at readline.c:349
#7 0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
annotation_suffix=0x4d6b44 "prompt") at top.c:2091
@@ -1929,8 +1937,8 @@ cat /proc/sys/net/ipv4/ip_forward
On my machine now outputs
1
IP forwarding is on.
-There is a lot of useful info in here best found by going in & having a look around,
-so I'll take you through some entries I consider important.
+There is a lot of useful info in here best found by going in and having a look
+around, so I'll take you through some entries I consider important.
All the processes running on the machine have their own entry defined by
/proc/<pid>
@@ -2060,7 +2068,8 @@ if the device doesn't say up
try
/etc/rc.d/init.d/network start
( this starts the network stack & hopefully calls ifconfig tr0 up ).
-ifconfig looks at the output of /proc/net/dev & presents it in a more presentable form
+ifconfig looks at the output of /proc/net/dev and presents it in a more
+presentable form.
Now ping the device from a machine in the same subnet.
if the RX packets count & TX packets counts don't increment you probably
have problems.
@@ -2086,34 +2095,6 @@ of the device.
See the manpage chandev.8 &type cat /proc/chandev for more info.
-
-Starting points for debugging scripting languages etc.
-======================================================
-
-bash/sh
-
-bash -x <scriptname>
-e.g. bash -x /usr/bin/bashbug
-displays the following lines as it executes them.
-+ MACHINE=i586
-+ OS=linux-gnu
-+ CC=gcc
-+ CFLAGS= -DPROGRAM='bash' -DHOSTTYPE='i586' -DOSTYPE='linux-gnu' -DMACHTYPE='i586-pc-linux-gnu' -DSHELL -DHAVE_CONFIG_H -I. -I. -I./lib -O2 -pipe
-+ RELEASE=2.01
-+ PATCHLEVEL=1
-+ RELSTATUS=release
-+ MACHTYPE=i586-pc-linux-gnu
-
-perl -d <scriptname> runs the perlscript in a fully interactive debugger
-<like gdb>.
-Type 'h' in the debugger for help.
-
-for debugging java type
-jdb <filename> another fully interactive gdb style debugger.
-& type ? in the debugger for help.
-
-
-
SysRq
=====
This is now supported by linux for s/390 & z/Architecture.
diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.txt
new file mode 100644
index 000000000000..f77651eca31e
--- /dev/null
+++ b/Documentation/scheduler/completion.txt
@@ -0,0 +1,236 @@
+completions - wait for completion handling
+==========================================
+
+This document was originally written based on 3.18.0 (linux-next)
+
+Introduction:
+-------------
+
+If you have one or more threads of execution that must wait for some process
+to have reached a point or a specific state, completions can provide a race
+free solution to this problem. Semantically they are somewhat like a
+pthread_barriers and have similar use-cases.
+
+Completions are a code synchronization mechanism that is preferable to any
+misuse of locks. Any time you think of using yield() or some quirky
+msleep(1); loop to allow something else to proceed, you probably want to
+look into using one of the wait_for_completion*() calls instead. The
+advantage of using completions is clear intent of the code but also more
+efficient code as both threads can continue until the result is actually
+needed.
+
+Completions are built on top of the generic event infrastructure in Linux,
+with the event reduced to a simple flag appropriately called "done" in
+struct completion, that tells the waiting threads of execution if they
+can continue safely.
+
+As completions are scheduling related the code is found in
+kernel/sched/completion.c - for details on completion design and
+implementation see completions-design.txt
+
+
+Usage:
+------
+
+There are three parts to the using completions, the initialization of the
+struct completion, the waiting part through a call to one of the variants of
+wait_for_completion() and the signaling side through a call to complete(),
+or complete_all(). Further there are some helper functions for checking the
+state of completions.
+
+To use completions one needs to include <linux/completion.h> and
+create a variable of type struct completion. The structure used for
+handling of completions is:
+
+ struct completion {
+ unsigned int done;
+ wait_queue_head_t wait;
+ };
+
+providing the wait queue to place tasks on for waiting and the flag for
+indicating the state of affairs.
+
+Completions should be named to convey the intent of the waiter. A good
+example is:
+
+ wait_for_completion(&early_console_added);
+
+ complete(&early_console_added);
+
+Good naming (as always) helps code readability.
+
+
+Initializing completions:
+-------------------------
+
+Initialization of dynamically allocated completions, often embedded in
+other structures, is done with:
+
+ void init_completion(&done);
+
+Initialization is accomplished by initializing the wait queue and setting
+the default state to "not available", that is, "done" is set to 0.
+
+The re-initialization function, reinit_completion(), simply resets the
+done element to "not available", thus again to 0, without touching the
+wait queue. Calling init_completion() on the same completions object is
+most likely a bug as it re-initializes the queue to an empty queue and
+enqueued tasks could get "lost" - use reinit_completion() in that case.
+
+For static declaration and initialization, macros are available. These are:
+
+ static DECLARE_COMPLETION(setup_done)
+
+used for static declarations in file scope. Within functions the static
+initialization should always use:
+
+ DECLARE_COMPLETION_ONSTACK(setup_done)
+
+suitable for automatic/local variables on the stack and will make lockdep
+happy. Note also that one needs to making *sure* the completion passt to
+work threads remains in-scope, and no references remain to on-stack data
+when the initiating function returns.
+
+
+Waiting for completions:
+------------------------
+
+For a thread of execution to wait for some concurrent work to finish, it
+calls wait_for_completion() on the initialized completion structure.
+A typical usage scenario is:
+
+ structure completion setup_done;
+ init_completion(&setup_done);
+ initialze_work(...,&setup_done,...)
+
+ /* run non-dependent code */ /* do setup */
+
+ wait_for_completion(&seupt_done); complete(setup_done)
+
+This is not implying any temporal order of wait_for_completion() and the
+call to complete() - if the call to complete() happened before the call
+to wait_for_completion() then the waiting side simply will continue
+immediately as all dependencies are satisfied.
+
+Note that wait_for_completion() is calling spin_lock_irq/spin_unlock_irq
+so it can only be called safely when you know that interrupts are enabled.
+Calling it from hard-irq context will result in hard to detect spurious
+enabling of interrupts.
+
+wait_for_completion():
+
+ void wait_for_completion(struct completion *done):
+
+The default behavior is to wait without a timeout and mark the task as
+uninterruptible. wait_for_completion() and its variants are only safe
+in soft-interrupt or process context but not in hard-irq context.
+As all variants of wait_for_completion() can (obviously) block for a long
+time, you probably don't want to call this with held locks - see also
+try_wait_for_completion() below.
+
+
+Variants available:
+-------------------
+
+The below variants all return status and this status should be checked in
+most(/all) cases - in cases where the status is deliberately not checked you
+probably want to make a note explaining this (e.g. see
+arch/arm/kernel/smp.c:__cpu_up()).
+
+A common problem that occurs is to have unclean assignment of return types,
+so care should be taken with assigning return-values to variables of proper
+type. Checking for the specific meaning of return values also has been found
+to be quite inaccurate e.g. constructs like
+if(!wait_for_completion_interruptible_timeout(...)) would execute the same
+code path for successful completion and for the interrupted case - which is
+probably not what you want.
+
+ int wait_for_completion_interruptible(struct completion *done)
+
+marking the task TASK_INTERRUPTIBLE. If a signal was received while waiting.
+It will return -ERESTARTSYS and 0 otherwise.
+
+ unsigned long wait_for_completion_timeout(struct completion *done,
+ unsigned long timeout)
+
+The task is marked as TASK_UNINTERRUPTIBLE and will wait at most timeout
+(in jiffies). If timeout occurs it return 0 else the remaining time in
+jiffies (but at least 1). Timeouts are preferably passed by msecs_to_jiffies()
+or usecs_to_jiffies(). If the returned timeout value is deliberately ignored
+a comment should probably explain why (e.g. see drivers/mfd/wm8350-core.c
+wm8350_read_auxadc())
+
+ long wait_for_completion_interruptible_timeout(
+ struct completion *done, unsigned long timeout)
+
+passing a timeout in jiffies and marking the task as TASK_INTERRUPTIBLE. If a
+signal was received it will return -ERESTARTSYS, 0 if completion timed-out and
+the remaining time in jiffies if completion occurred.
+
+Further variants include _killable which passes TASK_KILLABLE as the
+designated tasks state and will return a -ERESTARTSYS if interrupted or
+else 0 if completions was achieved as well as a _timeout variant.
+
+ long wait_for_completion_killable(struct completion *done)
+ long wait_for_completion_killable_timeout(struct completion *done,
+ unsigned long timeout)
+
+The _io variants wait_for_completion_io behave the same as the non-_io
+variants, except for accounting waiting time as waiting on IO, which has
+an impact on how scheduling is calculated.
+
+ void wait_for_completion_io(struct completion *done)
+ unsigned long wait_for_completion_io_timeout(struct completion *done
+ unsigned long timeout)
+
+
+Signaling completions:
+----------------------
+
+A thread of execution that wants to signal that the conditions for
+continuation have been achieved calls complete() to signal exactly one
+of the waiters that it can continue.
+
+ void complete(struct completion *done)
+
+or calls complete_all to signal all current and future waiters.
+
+ void complete_all(struct completion *done)
+
+The signaling will work as expected even if completions are signaled before
+a thread starts waiting. This is achieved by the waiter "consuming"
+(decrementing) the done element of struct completion. Waiting threads
+wakeup order is the same in which they were enqueued (FIFO order).
+
+If complete() is called multiple times then this will allow for that number
+of waiters to continue - each call to complete() will simply increment the
+done element. Calling complete_all() multiple times is a bug though. Both
+complete() and complete_all() can be called in hard-irq context safely.
+
+There only can be one thread calling complete() or complete_all() on a
+particular struct completions at any time - serialized through the wait
+queue spinlock. Any such concurrent calls to complete() or complete_all()
+probably are a design bug.
+
+Signaling completion from hard-irq context is fine as it will appropriately
+lock with spin_lock_irqsave/spin_unlock_irqrestore.
+
+
+try_wait_for_completion()/completion_done():
+--------------------------------------------
+
+The try_wait_for_completion will not put the thread on the wait queue but
+rather returns false if it would need to enqueue (block) the thread, else it
+consumes any posted completions and returns true.
+
+ bool try_wait_for_completion(struct completion *done)
+
+Finally to check state of a completions without changing it in any way is
+provided by completion_done() returning false if there are any posted
+completion that was not yet consumed by waiters implying that there are
+waiters and true otherwise;
+
+ bool completion_done(struct completion *done)
+
+Both try_wait_for_completion() and completion_done() are safe to be called in
+hard-irq context.
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 821c936e1a63..c9e7f4f223a5 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -323,8 +323,6 @@ about the status of the key service:
U Under construction by callback to userspace
N Negative key
- This file must be enabled at kernel configuration time as it allows anyone
- to list the keys database.
(*) /proc/key-users
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index aee73e78c7d4..02f8331edb8b 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -32,18 +32,42 @@ Procedure for submitting patches to the -stable tree:
- If the patch covers files in net/ or drivers/net please follow netdev stable
submission guidelines as described in
Documentation/networking/netdev-FAQ.txt
- - Send the patch, after verifying that it follows the above rules, to
- stable@vger.kernel.org. You must note the upstream commit ID in the
- changelog of your submission, as well as the kernel version you wish
- it to be applied to.
- - To have the patch automatically included in the stable tree, add the tag
+ - Security patches should not be handled (solely) by the -stable review
+ process but should follow the procedures in Documentation/SecurityBugs.
+
+For all other submissions, choose one of the following procedures:
+
+ --- Option 1 ---
+
+ To have the patch automatically included in the stable tree, add the tag
Cc: stable@vger.kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
or subsystem maintainer.
- - If the patch requires other patches as prerequisites which can be
- cherry-picked, then this can be specified in the following format in
- the sign-off area:
+
+ --- Option 2 ---
+
+ After the patch has been merged to Linus' tree, send an email to
+ stable@vger.kernel.org containing the subject of the patch, the commit ID,
+ why you think it should be applied, and what kernel version you wish it to
+ be applied to.
+
+ --- Option 3 ---
+
+ Send the patch, after verifying that it follows the above rules, to
+ stable@vger.kernel.org. You must note the upstream commit ID in the
+ changelog of your submission, as well as the kernel version you wish
+ it to be applied to.
+
+Option 1 is probably the easiest and most common. Options 2 and 3 are more
+useful if the patch isn't deemed worthy at the time it is applied to a public
+git tree (for instance, because it deserves more regression testing first).
+Option 3 is especially useful if the patch needs some special handling to apply
+to an older kernel (e.g., if API's have changed in the meantime).
+
+Additionally, some patches submitted via Option 1 may have additional patch
+prerequisites which can be cherry-picked. This can be specified in the following
+format in the sign-off area:
Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
@@ -57,13 +81,13 @@ Procedure for submitting patches to the -stable tree:
git cherry-pick fd21073
git cherry-pick <this commit>
+Following the submission:
+
- The sender will receive an ACK when the patch has been accepted into the
queue, or a NAK if the patch is rejected. This response might take a few
days, according to the developer's schedules.
- If accepted, the patch will be added to the -stable queue, for review by
other developers and by the relevant subsystem maintainer.
- - Security patches should not be sent to this alias, but instead to the
- documented security@kernel.org address.
Review cycle:
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 75511efefc64..83ab25660fc9 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -843,6 +843,7 @@ can be ORed together:
8192 - An unsigned module has been loaded in a kernel supporting module
signature.
16384 - A soft lockup has previously occurred on the system.
+32768 - The kernel has been live patched.
==============================================================
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index 666594b43cff..6294b5186ae5 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -97,6 +97,14 @@ rmem_max
The maximum receive socket buffer size in bytes.
+tstamp_allow_data
+-----------------
+Allow processes to receive tx timestamps looped together with the original
+packet contents. If disabled, transmit timestamp requests from unprivileged
+processes are dropped unless socket option SOF_TIMESTAMPING_OPT_TSONLY is set.
+Default: 1 (on)
+
+
wmem_default
------------
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 4415aa915681..902b4574acfb 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -555,12 +555,12 @@ this is causing problems for your system/application.
oom_dump_tasks
-Enables a system-wide task dump (excluding kernel threads) to be
-produced when the kernel performs an OOM-killing and includes such
-information as pid, uid, tgid, vm size, rss, nr_ptes, swapents,
-oom_score_adj score, and name. This is helpful to determine why the
-OOM killer was invoked, to identify the rogue task that caused it,
-and to determine why the OOM killer chose the task it did to kill.
+Enables a system-wide task dump (excluding kernel threads) to be produced
+when the kernel performs an OOM-killing and includes such information as
+pid, uid, tgid, vm size, rss, nr_ptes, nr_pmds, swapents, oom_score_adj
+score, and name. This is helpful to determine why the OOM killer was
+invoked, to identify the rogue task that caused it, and to determine why
+the OOM killer chose the task it did to kill.
If this is set to zero, this information is suppressed. On very
large systems with thousands of tasks it may not be feasible to dump
@@ -728,7 +728,7 @@ The default value is 60.
- user_reserve_kbytes
-When overcommit_memory is set to 2, "never overommit" mode, reserve
+When overcommit_memory is set to 2, "never overcommit" mode, reserve
min(3% of current process size, user_reserve_kbytes) of free memory.
This is intended to prevent a user from starting a single memory hogging
process, such that they cannot recover (kill the hog).
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 230ce71f4d75..2b47704f75cb 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -389,9 +389,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n"
buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n"
buf += " .close_session = " + fabric_mod_name + "_close_session,\n"
- buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n"
- buf += " .fall_back_to_erl0 = " + fabric_mod_name + "_reset_nexus,\n"
- buf += " .sess_logged_in = " + fabric_mod_name + "_sess_logged_in,\n"
buf += " .sess_get_index = " + fabric_mod_name + "_sess_get_index,\n"
buf += " .sess_get_initiator_sid = NULL,\n"
buf += " .write_pending = " + fabric_mod_name + "_write_pending,\n"
@@ -402,7 +399,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n"
buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n"
buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n"
- buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n"
+ buf += " .aborted_task = " + fabric_mod_name + "_aborted_task,\n"
buf += " /*\n"
buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
buf += " */\n"
@@ -428,7 +425,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /*\n"
buf += " * Register the top level struct config_item_type with TCM core\n"
buf += " */\n"
- buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
+ buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n"
buf += " if (IS_ERR(fabric)) {\n"
buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
buf += " return PTR_ERR(fabric);\n"
@@ -595,7 +592,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
if re.search('get_fabric_name', fo):
buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
buf += "{\n"
- buf += " return \"" + fabric_mod_name[4:] + "\";\n"
+ buf += " return \"" + fabric_mod_name + "\";\n"
buf += "}\n\n"
bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
continue
@@ -820,27 +817,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_close_session(struct se_session *);\n"
- if re.search('stop_session\)\(', fo):
- buf += "void " + fabric_mod_name + "_stop_session(struct se_session *se_sess, int sess_sleep , int conn_sleep)\n"
- buf += "{\n"
- buf += " return;\n"
- buf += "}\n\n"
- bufi += "void " + fabric_mod_name + "_stop_session(struct se_session *, int, int);\n"
-
- if re.search('fall_back_to_erl0\)\(', fo):
- buf += "void " + fabric_mod_name + "_reset_nexus(struct se_session *se_sess)\n"
- buf += "{\n"
- buf += " return;\n"
- buf += "}\n\n"
- bufi += "void " + fabric_mod_name + "_reset_nexus(struct se_session *);\n"
-
- if re.search('sess_logged_in\)\(', fo):
- buf += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *se_sess)\n"
- buf += "{\n"
- buf += " return 0;\n"
- buf += "}\n\n"
- bufi += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *);\n"
-
if re.search('sess_get_index\)\(', fo):
buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
buf += "{\n"
@@ -898,19 +874,18 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
if re.search('queue_tm_rsp\)\(', fo):
- buf += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
+ buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
buf += "{\n"
- buf += " return 0;\n"
+ buf += " return;\n"
buf += "}\n\n"
- bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
+ bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
- if re.search('is_state_remove\)\(', fo):
- buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n"
+ if re.search('aborted_task\)\(', fo):
+ buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
buf += "{\n"
- buf += " return 0;\n"
+ buf += " return;\n"
buf += "}\n\n"
- bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
-
+ bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
ret = p.write(buf)
if ret:
@@ -1018,11 +993,11 @@ def main(modname, proto_ident):
tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
- input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ")
+ input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
- input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kconfig..? [yes,no]: ")
+ input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)
diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt
index fca24c931ec8..753e47cc2e20 100644
--- a/Documentation/thermal/cpu-cooling-api.txt
+++ b/Documentation/thermal/cpu-cooling-api.txt
@@ -3,7 +3,7 @@ CPU cooling APIs How To
Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
-Updated: 12 May 2012
+Updated: 6 Jan 2015
Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
@@ -25,7 +25,18 @@ the user. The registration APIs returns the cooling device pointer.
clip_cpus: cpumask of cpus where the frequency constraints will happen.
-1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
+ struct device_node *np, const struct cpumask *clip_cpus)
+
+ This interface function registers the cpufreq cooling device with
+ the name "thermal-cpufreq-%x" linking it with a device tree node, in
+ order to bind it via the thermal DT code. This api can support multiple
+ instances of cpufreq cooling devices.
+
+ np: pointer to the cooling device device tree node
+ clip_cpus: cpumask of cpus where the frequency constraints will happen.
+
+1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
This interface function unregisters the "thermal-cpufreq-%x" cooling device.
diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
index bba7dbfc49ed..02361552a3ea 100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -46,7 +46,7 @@ At typical coresight system would look like this:
| | . | ! | | . | ! | ! . | | SWD/
| | . | ! | | . | ! | ! . | | JTAG
*****************************************************************<-|
- *************************** AMBA Debug ABP ************************
+ *************************** AMBA Debug APB ************************
*****************************************************************
| . ! . ! ! . |
| . * . * * . |
@@ -79,7 +79,7 @@ At typical coresight system would look like this:
To trace port TPIU= Trace Port Interface Unit
SWD = Serial Wire Debug
-While on target configuration of the components is done via the ABP bus,
+While on target configuration of the components is done via the APB bus,
all trace data are carried out-of-band on the ATB bus. The CTM provides
a way to aggregate and distribute signals between CoreSight components.
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 8408e040f06f..572ca923631a 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1740,7 +1740,7 @@ no pid
yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
-# echo -1 > set_ftrace_pid
+# echo > set_ftrace_pid
# cat trace |head
# tracer: function
#
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
new file mode 100644
index 000000000000..076ac7ba7f93
--- /dev/null
+++ b/Documentation/usb/gadget-testing.txt
@@ -0,0 +1,728 @@
+This file summarizes information on basic testing of USB functions
+provided by gadgets.
+
+1. ACM function
+2. ECM function
+3. ECM subset function
+4. EEM function
+5. FFS function
+6. HID function
+7. LOOPBACK function
+8. MASS STORAGE function
+9. MIDI function
+10. NCM function
+11. OBEX function
+12. PHONET function
+13. RNDIS function
+14. SERIAL function
+15. SOURCESINK function
+16. UAC1 function
+17. UAC2 function
+18. UVC function
+
+
+1. ACM function
+===============
+
+The function is provided by usb_f_acm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "acm".
+The ACM function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+
+Testing the ACM function
+------------------------
+
+On the host: cat > /dev/ttyACM<X>
+On the device : cat /dev/ttyGS<Y>
+
+then the other way round
+
+On the device: cat > /dev/ttyGS<Y>
+On the host: cat /dev/ttyACM<X>
+
+2. ECM function
+===============
+
+The function is provided by usb_f_ecm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ecm".
+The ECM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ecm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the ECM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+3. ECM subset function
+======================
+
+The function is provided by usb_f_ecm_subset.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "geth".
+The ECM subset function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ecm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the ECM subset function
+-------------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+4. EEM function
+===============
+
+The function is provided by usb_f_eem.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "eem".
+The EEM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/eem.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the EEM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+5. FFS function
+===============
+
+The function is provided by usb_f_fs.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ffs".
+The function directory is intentionally empty and not modifiable.
+
+After creating the directory there is a new instance (a "device") of FunctionFS
+available in the system. Once a "device" is available, the user should follow
+the standard procedure for using FunctionFS (mount it, run the userspace
+process which implements the function proper). The gadget should be enabled
+by writing a suitable string to usb_gadget/<gadget>/UDC.
+
+Testing the FFS function
+------------------------
+
+On the device: start the function's userspace daemon, enable the gadget
+On the host: use the USB function provided by the device
+
+6. HID function
+===============
+
+The function is provided by usb_f_hid.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "hid".
+The HID function provides these attributes in its function directory:
+
+ protocol - HID protocol to use
+ report_desc - data to be used in HID reports, except data
+ passed with /dev/hidg<X>
+ report_length - HID report length
+ subclass - HID subclass to use
+
+For a keyboard the protocol and the subclass are 1, the report_length is 8,
+while the report_desc is:
+
+$ hd my_report_desc
+00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.|
+00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.|
+00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....|
+00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...|
+0000003f
+
+Such a sequence of bytes can be stored to the attribute with echo:
+
+$ echo -ne \\x05\\x01\\x09\\x06\\xa1.....
+
+Testing the HID function
+------------------------
+
+Device:
+- create the gadget
+- connect the gadget to a host, preferably not the one used
+to control the gadget
+- run a program which writes to /dev/hidg<N>, e.g.
+a userspace program found in Documentation/usb/gadget_hid.txt:
+
+$ ./hid_gadget_test /dev/hidg0 keyboard
+
+Host:
+- observe the keystrokes from the gadget
+
+7. LOOPBACK function
+====================
+
+The function is provided by usb_f_ss_lb.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "Loopback".
+The LOOPBACK function provides these attributes in its function directory:
+
+ qlen - depth of loopback queue
+ bulk_buflen - buffer length
+
+Testing the LOOPBACK function
+-----------------------------
+
+device: run the gadget
+host: test-usb
+
+http://www.linux-usb.org/usbtest/testusb.c
+
+8. MASS STORAGE function
+========================
+
+The function is provided by usb_f_mass_storage.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "mass_storage".
+The MASS STORAGE function provides these attributes in its directory:
+files:
+
+ stall - Set to permit function to halt bulk endpoints.
+ Disabled on some USB devices known not to work
+ correctly. You should set it to true.
+ num_buffers - Number of pipeline buffers. Valid numbers
+ are 2..4. Available only if
+ CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+and a default lun.0 directory corresponding to SCSI LUN #0.
+
+A new lun can be added with mkdir:
+
+$ mkdir functions/mass_storage.0/partition.5
+
+Lun numbering does not have to be continuous, except for lun #0 which is
+created by default. A maximum of 8 luns can be specified and they all must be
+named following the <name>.<number> scheme. The numbers can be 0..8.
+Probably a good convention is to name the luns "lun.<number>",
+although it is not mandatory.
+
+In each lun directory there are the following attribute files:
+
+ file - The path to the backing file for the LUN.
+ Required if LUN is not marked as removable.
+ ro - Flag specifying access to the LUN shall be
+ read-only. This is implied if CD-ROM emulation
+ is enabled as well as when it was impossible
+ to open "filename" in R/W mode.
+ removable - Flag specifying that LUN shall be indicated as
+ being removable.
+ cdrom - Flag specifying that LUN shall be reported as
+ being a CD-ROM.
+ nofua - Flag specifying that FUA flag
+ in SCSI WRITE(10,12)
+
+Testing the MASS STORAGE function
+---------------------------------
+
+device: connect the gadget, enable it
+host: dmesg, see the USB drives appear (if system configured to automatically
+mount)
+
+9. MIDI function
+================
+
+The function is provided by usb_f_midi.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "midi".
+The MIDI function provides these attributes in its function directory:
+
+ buflen - MIDI buffer length
+ id - ID string for the USB MIDI adapter
+ in_ports - number of MIDI input ports
+ index - index value for the USB MIDI adapter
+ out_ports - number of MIDI output ports
+ qlen - USB read request queue length
+
+Testing the MIDI function
+-------------------------
+
+There are two cases: playing a mid from the gadget to
+the host and playing a mid from the host to the gadget.
+
+1) Playing a mid from the gadget to the host
+host)
+
+$ arecordmidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+$ arecordmidi -p 24:0 from_gadget.mid
+
+gadget)
+
+$ aplaymidi -l
+ Port Client name Port name
+ 20:0 f_midi f_midi
+
+$ aplaymidi -p 20:0 to_host.mid
+
+2) Playing a mid from the host to the gadget
+gadget)
+
+$ arecordmidi -l
+ Port Client name Port name
+ 20:0 f_midi f_midi
+
+$ arecordmidi -p 20:0 from_host.mid
+
+host)
+
+$ aplaymidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+
+$ aplaymidi -p24:0 to_gadget.mid
+
+The from_gadget.mid should sound identical to the to_host.mid.
+The from_host.id should sound identical to the to_gadget.mid.
+
+MIDI files can be played to speakers/headphones with e.g. timidity installed
+
+$ aplaymidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+128:0 TiMidity TiMidity port 0
+128:1 TiMidity TiMidity port 1
+128:2 TiMidity TiMidity port 2
+128:3 TiMidity TiMidity port 3
+
+$ aplaymidi -p 128:0 file.mid
+
+MIDI ports can be logically connected using the aconnect utility, e.g.:
+
+$ aconnect 24:0 128:0 # try it on the host
+
+After the gadget's MIDI port is connected to timidity's MIDI port,
+whatever is played at the gadget side with aplaymidi -l is audible
+in host's speakers/headphones.
+
+10. NCM function
+================
+
+The function is provided by usb_f_ncm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ncm".
+The NCM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ncm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the NCM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+11. OBEX function
+=================
+
+The function is provided by usb_f_obex.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "obex".
+The OBEX function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+Testing the OBEX function
+-------------------------
+
+On device: seriald -f /dev/ttyGS<Y> -s 1024
+On host: serialc -v <vendorID> -p <productID> -i<interface#> -a1 -s1024 \
+ -t<out endpoint addr> -r<in endpoint addr>
+
+where seriald and serialc are Felipe's utilities found here:
+
+https://git.gitorious.org/usb/usb-tools.git master
+
+12. PHONET function
+===================
+
+The function is provided by usb_f_phonet.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "phonet".
+The PHONET function provides just one attribute in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+
+Testing the PHONET function
+---------------------------
+
+It is not possible to test the SOCK_STREAM protocol without a specific piece
+of hardware, so only SOCK_DGRAM has been tested. For the latter to work,
+in the past I had to apply the patch mentioned here:
+
+http://www.spinics.net/lists/linux-usb/msg85689.html
+
+These tools are required:
+
+git://git.gitorious.org/meego-cellular/phonet-utils.git
+
+On the host:
+
+$ ./phonet -a 0x10 -i usbpn0
+$ ./pnroute add 0x6c usbpn0
+$./pnroute add 0x10 usbpn0
+$ ifconfig usbpn0 up
+
+On the device:
+
+$ ./phonet -a 0x6c -i upnlink0
+$ ./pnroute add 0x10 upnlink0
+$ ifconfig upnlink0 up
+
+Then a test program can be used:
+
+http://www.spinics.net/lists/linux-usb/msg85690.html
+
+On the device:
+
+$ ./pnxmit -a 0x6c -r
+
+On the host:
+
+$ ./pnxmit -a 0x10 -s 0x6c
+
+As a result some data should be sent from host to device.
+Then the other way round:
+
+On the host:
+
+$ ./pnxmit -a 0x10 -r
+
+On the device:
+
+$ ./pnxmit -a 0x6c -s 0x10
+
+13. RNDIS function
+==================
+
+The function is provided by usb_f_rndis.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "rndis".
+The RNDIS function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/rndis.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+By default there can be only 1 RNDIS interface in the system.
+
+Testing the RNDIS function
+--------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+14. SERIAL function
+===================
+
+The function is provided by usb_f_gser.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "gser".
+The SERIAL function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+Testing the SERIAL function
+---------------------------
+
+On host: insmod usbserial
+ echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id
+On host: cat > /dev/ttyUSB<X>
+On target: cat /dev/ttyGS<Y>
+
+then the other way round
+
+On target: cat > /dev/ttyGS<Y>
+On host: cat /dev/ttyUSB<X>
+
+15. SOURCESINK function
+=======================
+
+The function is provided by usb_f_ss_lb.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "SourceSink".
+The SOURCESINK function provides these attributes in its function directory:
+
+ pattern - 0 (all zeros), 1 (mod63), 2 (none)
+ isoc_interval - 1..16
+ isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
+ isoc_mult - 0..2 (hs/ss only)
+ isoc_maxburst - 0..15 (ss only)
+ bulk_buflen - buffer length
+
+Testing the SOURCESINK function
+-------------------------------
+
+device: run the gadget
+host: test-usb
+
+http://www.linux-usb.org/usbtest/testusb.c
+
+16. UAC1 function
+=================
+
+The function is provided by usb_f_uac1.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uac1".
+The uac1 function provides these attributes in its function directory:
+
+ audio_buf_size - audio buffer size
+ fn_cap - capture pcm device file name
+ fn_cntl - control device file name
+ fn_play - playback pcm device file name
+ req_buf_size - ISO OUT endpoint request buffer size
+ req_count - ISO OUT endpoint request count
+
+The attributes have sane default values.
+
+Testing the UAC1 function
+-------------------------
+
+device: run the gadget
+host: aplay -l # should list our USB Audio Gadget
+
+17. UAC2 function
+=================
+
+The function is provided by usb_f_uac2.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uac2".
+The uac2 function provides these attributes in its function directory:
+
+ chmask - capture channel mask
+ c_srate - capture sampling rate
+ c_ssize - capture sample size (bytes)
+ p_chmask - playback channel mask
+ p_srate - playback sampling rate
+ p_ssize - playback sample size (bytes)
+
+The attributes have sane default values.
+
+Testing the UAC2 function
+-------------------------
+
+device: run the gadget
+host: aplay -l # should list our USB Audio Gadget
+
+This function does not require real hardware support, it just
+sends a stream of audio data to/from the host. In order to
+actually hear something at the device side, a command similar
+to this must be used at the device side:
+
+$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
+
+e.g.:
+
+$ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \
+aplay -D default:CARD=OdroidU3
+
+18. UVC function
+================
+
+The function is provided by usb_f_uvc.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uvc".
+The uvc function provides these attributes in its function directory:
+
+ streaming_interval - interval for polling endpoint for data transfers
+ streaming_maxburst - bMaxBurst for super speed companion descriptor
+ streaming_maxpacket - maximum packet size this endpoint is capable of
+ sending or receiving when this configuration is
+ selected
+
+There are also "control" and "streaming" subdirectories, each of which contain
+a number of their subdirectories. There are some sane defaults provided, but
+the user must provide the following:
+
+ control header - create in control/header, link from control/class/fs
+ and/or control/class/ss
+ streaming header - create in streaming/header, link from
+ streaming/class/fs and/or streaming/class/hs and/or
+ streaming/class/ss
+ format description - create in streaming/mjpeg and/or
+ streaming/uncompressed
+ frame description - create in streaming/mjpeg/<format> and/or in
+ streaming/uncompressed/<format>
+
+Each frame description contains frame interval specification, and each
+such specification consists of a number of lines with an inverval value
+in each line. The rules stated above are best illustrated with an example:
+
+# mkdir functions/uvc.usb0/control/header/h
+# cd functions/uvc.usb0/control/header/h
+# ln -s header/h class/fs
+# ln -s header/h class/ss
+# mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p
+# cat <<EOF > functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval
+666666
+1000000
+5000000
+EOF
+# cd $GADGET_CONFIGFS_ROOT
+# mkdir functions/uvc.usb0/streaming/header/h
+# cd functions/uvc.usb0/streaming/header/h
+# ln -s ../../uncompressed/u
+# cd ../../class/fs
+# ln -s ../../header/h
+# cd ../../class/hs
+# ln -s ../../header/h
+# cd ../../class/ss
+# ln -s ../../header/h
+
+
+Testing the UVC function
+------------------------
+
+device: run the gadget, modprobe vivid
+
+# uvc-gadget -u /dev/video<uvc video node #> -v /dev/video<vivid video node #>
+
+where uvc-gadget is this program:
+http://git.ideasonboard.org/uvc-gadget.git
+
+with these patches:
+http://www.spinics.net/lists/linux-usb/msg99220.html
+
+host: luvcview -f yuv
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 61e67f6a20a0..6b4a88a8c8e3 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -236,8 +236,12 @@ I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-You must explicitly load the usbserial driver with parameters to
-configure it to recognize the gadget serial device, like this:
+You must load the usbserial driver and explicitly set its parameters
+to configure it to recognize the gadget serial device, like this:
+
+ echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id
+
+The legacy way is to use module parameters:
modprobe usbserial vendor=0x0525 product=0xA4A6
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index c42bb9cd3b43..28425f736756 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -72,7 +72,7 @@ to listen on a single bus, otherwise, to listen on all buses, type:
# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out
-This process will be reading until killed. Naturally, the output can be
+This process will read until it is killed. Naturally, the output can be
redirected to a desirable location. This is preferred, because it is going
to be quite long.
@@ -231,7 +231,7 @@ number. Number zero (/dev/usbmon0) is special and means "all buses".
Note that specific naming policy is set by your Linux distribution.
If you create /dev/usbmon0 by hand, make sure that it is owned by root
-and has mode 0600. Otherwise, unpriviledged users will be able to snoop
+and has mode 0600. Otherwise, unprivileged users will be able to snoop
keyboard traffic.
The following ioctl calls are available, with MON_IOC_MAGIC 0x92:
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt
deleted file mode 100644
index 0b69e4ee8e31..000000000000
--- a/Documentation/video4linux/CQcam.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-c-qcam - Connectix Color QuickCam video4linux kernel driver
-
-Copyright (C) 1999 Dave Forrest <drf5n@virginia.edu>
- released under GNU GPL.
-
-1999-12-08 Dave Forrest, written with kernel version 2.2.12 in mind
-
-
-Table of Contents
-
-1.0 Introduction
-2.0 Compilation, Installation, and Configuration
-3.0 Troubleshooting
-4.0 Future Work / current work arounds
-9.0 Sample Program, v4lgrab
-10.0 Other Information
-
-
-1.0 Introduction
-
- The file ../../drivers/media/parport/c-qcam.c is a device driver for
-the Logitech (nee Connectix) parallel port interface color CCD camera.
-This is a fairly inexpensive device for capturing images. Logitech
-does not currently provide information for developers, but many people
-have engineered several solutions for non-Microsoft use of the Color
-Quickcam.
-
-1.1 Motivation
-
- I spent a number of hours trying to get my camera to work, and I
-hope this document saves you some time. My camera will not work with
-the 2.2.13 kernel as distributed, but with a few patches to the
-module, I was able to grab some frames. See 4.0, Future Work.
-
-
-
-2.0 Compilation, Installation, and Configuration
-
- The c-qcam depends on parallel port support, video4linux, and the
-Color Quickcam. It is also nice to have the parallel port readback
-support enabled. I enabled these as modules during the kernel
-configuration. The appropriate flags are:
-
- CONFIG_PRINTER M for lp.o, parport.o parport_pc.o modules
- CONFIG_PNP_PARPORT M for autoprobe.o IEEE1284 readback module
- CONFIG_PRINTER_READBACK M for parport_probe.o IEEE1284 readback module
- CONFIG_VIDEO_DEV M for videodev.o video4linux module
- CONFIG_VIDEO_CQCAM M for c-qcam.o Color Quickcam module
-
- With these flags, the kernel should compile and install the modules.
-To record and monitor the compilation, I use:
-
- (make zlilo ; \
- make modules; \
- make modules_install ;
- depmod -a ) &>log &
- less log # then a capital 'F' to watch the progress
-
-But that is my personal preference.
-
-2.2 Configuration
-
- The configuration requires module configuration and device
-configuration. The following sections detail these procedures.
-
-
-2.1 Module Configuration
-
- Using modules requires a bit of work to install and pass the
-parameters. Understand that entries in /etc/modprobe.d/*.conf of:
-
- alias parport_lowlevel parport_pc
- options parport_pc io=0x378 irq=none
- alias char-major-81 videodev
- alias char-major-81-0 c-qcam
-
-2.2 Device Configuration
-
- At this point, we need to ensure that the device files exist.
-Video4linux used the /dev/video* files, and we want to attach the
-Quickcam to one of these.
-
- ls -lad /dev/video* # should produce a list of the video devices
-
-If the video devices do not exist, you can create them with:
-
- su
- cd /dev
- for ii in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
- mknod video$ii c 81 $ii # char-major-81-[0-16]
- chown root.root video$ii # owned by root
- chmod 600 video$ii # read/writable by root only
- done
-
- Lots of people connect video0 to video and bttv, but you might want
-your c-qcam to mean something more:
-
- ln -s video0 c-qcam # make /dev/c-qcam a working file
- ln -s c-qcam video # make /dev/c-qcam your default video source
-
- But these are conveniences. The important part is to make the proper
-special character files with the right major and minor numbers. All
-of the special device files are listed in ../devices.txt. If you
-would like the c-qcam readable by non-root users, you will need to
-change the permissions.
-
-3.0 Troubleshooting
-
- If the sample program below, v4lgrab, gives you output then
-everything is working.
-
- v4lgrab | wc # should give you a count of characters
-
- Otherwise, you have some problem.
-
- The c-qcam is IEEE1284 compatible, so if you are using the proc file
-system (CONFIG_PROC_FS), the parallel printer support
-(CONFIG_PRINTER), the IEEE 1284 system,(CONFIG_PRINTER_READBACK), you
-should be able to read some identification from your quickcam with
-
- modprobe -v parport
- modprobe -v parport_probe
- cat /proc/parport/PORTNUMBER/autoprobe
-Returns:
- CLASS:MEDIA;
- MODEL:Color QuickCam 2.0;
- MANUFACTURER:Connectix;
-
- A good response to this indicates that your color quickcam is alive
-and well. A common problem is that the current driver does not
-reliably detect a c-qcam, even though one is attached. In this case,
-
- modprobe -v c-qcam
-or
- insmod -v c-qcam
-
- Returns a message saying "Device or resource busy" Development is
-currently underway, but a workaround is to patch the module to skip
-the detection code and attach to a defined port. Check the
-video4linux mailing list and archive for more current information.
-
-3.1 Checklist:
-
- Can you get an image?
- v4lgrab >qcam.ppm ; wc qcam.ppm ; xv qcam.ppm
-
- Is a working c-qcam connected to the port?
- grep ^ /proc/parport/?/autoprobe
-
- Do the /dev/video* files exist?
- ls -lad /dev/video
-
- Is the c-qcam module loaded?
- modprobe -v c-qcam ; lsmod
-
- Does the camera work with alternate programs? cqcam, etc?
-
-
-
-
-4.0 Future Work / current workarounds
-
- It is hoped that this section will soon become obsolete, but if it
-isn't, you might try patching the c-qcam module to add a parport=xxx
-option as in the bw-qcam module so you can specify the parallel port:
-
- insmod -v c-qcam parport=0
-
-And bypass the detection code, see ../../drivers/char/c-qcam.c and
-look for the 'qc_detect' code and call.
-
- Note that there is work in progress to change the video4linux API,
-this work is documented at the video4linux2 site listed below.
-
-
-9.0 --- A sample program using v4lgrabber,
-
-v4lgrab is a simple image grabber that will copy a frame from the
-first video device, /dev/video0 to standard output in portable pixmap
-format (.ppm) To produce .jpg output, you can use it like this:
-'v4lgrab | convert - c-qcam.jpg'
-
-
-10.0 --- Other Information
-
-Use the ../../Maintainers file, particularly the VIDEO FOR LINUX and PARALLEL
-PORT SUPPORT sections
-
-The video4linux page:
- http://linuxtv.org
-
-The V4L2 API spec:
- http://v4l2spec.bytesex.org/
-
-Some web pages about the quickcams:
- http://www.pingouin-land.com/howto/QuickCam-HOWTO.html
-
- http://www.crynwr.com/qcpc/ QuickCam Third-Party Drivers
- http://www.crynwr.com/qcpc/re.html Some Reverse Engineering
- http://www.wirelesscouch.net/software/gqcam/ v4l client
- http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
- ftp://ftp.cs.unm.edu/pub/chris/quickcam/ Has lots of drivers
- http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information
-
-
diff --git a/Documentation/video4linux/README.tlg2300 b/Documentation/video4linux/README.tlg2300
deleted file mode 100644
index 416ccb93d8c9..000000000000
--- a/Documentation/video4linux/README.tlg2300
+++ /dev/null
@@ -1,47 +0,0 @@
-tlg2300 release notes
-====================
-
-This is a v4l2/dvb device driver for the tlg2300 chip.
-
-
-current status
-==============
-
-video
- - support mmap and read().(no overlay)
-
-audio
- - The driver will register a ALSA card for the audio input.
-
-vbi
- - Works for almost TV norms.
-
-dvb-t
- - works for DVB-T
-
-FM