diff options
Diffstat (limited to 'Documentation')
39 files changed, 858 insertions, 191 deletions
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram new file mode 100644 index 000000000000..c8b3b48ec62c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -0,0 +1,99 @@ +What: /sys/block/zram<id>/disksize +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is read-write and specifies the disk size + which represents the limit on the *uncompressed* worth of data + that can be stored in this disk. + +What: /sys/block/zram<id>/initstate +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is read-only and shows the initialization + state of the device. + +What: /sys/block/zram<id>/reset +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is write-only and allows resetting the + device. The reset operation frees all the memory assocaited + with this device. + +What: /sys/block/zram<id>/num_reads +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The num_reads file is read-only and specifies the number of + reads (failed or successful) done on this device. + +What: /sys/block/zram<id>/num_writes +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The num_writes file is read-only and specifies the number of + writes (failed or successful) done on this device. + +What: /sys/block/zram<id>/invalid_io +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The invalid_io file is read-only and specifies the number of + non-page-size-aligned I/O requests issued to this device. + +What: /sys/block/zram<id>/notify_free +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The notify_free file is read-only and specifies the number of + swap slot free notifications received by this device. These + notifications are send to a swap block device when a swap slot + is freed. This statistic is applicable only when this disk is + being used as a swap disk. + +What: /sys/block/zram<id>/discard +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The discard file is read-only and specifies the number of + discard requests received by this device. These requests + provide information to block device regarding blocks which are + no longer used by filesystem. + +What: /sys/block/zram<id>/zero_pages +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The zero_pages file is read-only and specifies number of zero + filled pages written to this disk. No memory is allocated for + such pages. + +What: /sys/block/zram<id>/orig_data_size +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The orig_data_size file is read-only and specifies uncompressed + size of data stored in this disk. This excludes zero-filled + pages (zero_pages) since no memory is allocated for them. + Unit: bytes + +What: /sys/block/zram<id>/compr_data_size +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The compr_data_size file is read-only and specifies compressed + size of data stored in this disk. So, compression ratio can be + calculated using orig_data_size and this statistic. + Unit: bytes + +What: /sys/block/zram<id>/mem_used_total +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The mem_used_total file is read-only and specifies the amount + of memory, including allocator fragmentation and metadata + overhead, allocated for this disk. So, allocator space + efficiency can be calculated using compr_data_size and this + statistic. + Unit: bytes
\ No newline at end of file diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 6ae97157b1c7..be34dcbe0d90 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -250,6 +250,9 @@ <!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> +<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml"> +<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> +<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml"> <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml"> <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> @@ -347,6 +350,9 @@ <!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> +<!ENTITY srggb10 SYSTEM "v4l/pixfmt-srggb10.xml"> +<!ENTITY srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> +<!ENTITY y10 SYSTEM "v4l/pixfmt-y10.xml"> <!ENTITY cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> <!ENTITY encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml"> diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml index 54447f0d0784..c9ce61d981f5 100644 --- a/Documentation/DocBook/v4l/compat.xml +++ b/Documentation/DocBook/v4l/compat.xml @@ -21,11 +21,15 @@ API.</para> <title>Opening and Closing Devices</title> <para>For compatibility reasons the character device file names -recommended for V4L2 video capture, overlay, radio, teletext and raw +recommended for V4L2 video capture, overlay, radio and raw vbi capture devices did not change from those used by V4L. They are listed in <xref linkend="devices" /> and below in <xref linkend="v4l-dev" />.</para> + <para>The teletext devices (minor range 192-223) have been removed in +V4L2 and no longer exist. There is no hardware available anymore for handling +pure teletext. Instead raw or sliced VBI is used.</para> + <para>The V4L <filename>videodev</filename> module automatically assigns minor numbers to drivers in load order, depending on the registered device type. We recommend that V4L2 drivers by default @@ -66,13 +70,6 @@ not compatible with V4L or V4L2.</para> </footnote>, <entry>64-127</entry> </row> <row> - <entry>Teletext decoder</entry> - <entry><para><filename>/dev/vtx</filename>, -<filename>/dev/vtx0</filename> to -<filename>/dev/vtx31</filename></para></entry> - <entry>192-223</entry> - </row> - <row> <entry>Raw VBI capture</entry> <entry><para><filename>/dev/vbi</filename>, <filename>/dev/vbi0</filename> to @@ -2345,6 +2342,17 @@ more information.</para> </listitem> </orderedlist> </section> + <section> + <title>V4L2 in Linux 2.6.37</title> + <orderedlist> + <listitem> + <para>Remove the vtx (videotext/teletext) API. This API was no longer +used and no hardware exists to verify the API. Nor were any userspace applications found +that used it. It was originally scheduled for removal in 2.6.35. + </para> + </listitem> + </orderedlist> + </section> <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title> diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml index 8408caaee276..2fae3e87ce73 100644 --- a/Documentation/DocBook/v4l/controls.xml +++ b/Documentation/DocBook/v4l/controls.xml @@ -312,10 +312,17 @@ minimum value disables backlight compensation.</entry> information and bits 24-31 must be zero.</entry> </row> <row> + <entry><constant>V4L2_CID_ILLUMINATORS_1</constant> + <constant>V4L2_CID_ILLUMINATORS_2</constant></entry> + <entry>boolean</entry> + <entry>Switch on or off the illuminator 1 or 2 of the device + (usually a microscope).</entry> + </row> + <row> <entry><constant>V4L2_CID_LASTP1</constant></entry> <entry></entry> <entry>End of the predefined control IDs (currently -<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry> +<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry> </row> <row> <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry> @@ -357,9 +364,6 @@ enumerate_menu (void) querymenu.index++) { if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &querymenu)) { printf (" %s\n", querymenu.name); - } else { - perror ("VIDIOC_QUERYMENU"); - exit (EXIT_FAILURE); } } } diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml index 0869d701b1e5..360d2737e649 100644 --- a/Documentation/DocBook/v4l/dev-rds.xml +++ b/Documentation/DocBook/v4l/dev-rds.xml @@ -3,15 +3,16 @@ <para>The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on an inaudible audio subcarrier of a radio program. This -interface is aimed at devices capable of receiving and decoding RDS +interface is aimed at devices capable of receiving and/or transmitting RDS information.</para> <para>For more information see the core RDS standard <xref linkend="en50067" /> and the RBDS standard <xref linkend="nrsc4" />.</para> <para>Note that the RBDS standard as is used in the USA is almost identical -to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields -have slightly different meanings. See the RBDS standard for more information.</para> +to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the +fields have slightly different meanings. See the RBDS standard for more +information.</para> <para>The RBDS standard also specifies support for MMBS (Modified Mobile Search). This is a proprietary format which seems to be discontinued. The RDS interface does not @@ -21,16 +22,25 @@ be needed, then please contact the linux-media mailing list: &v4l-ml;.</para> <section> <title>Querying Capabilities</title> - <para>Devices supporting the RDS capturing API -set the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in + <para>Devices supporting the RDS capturing API set +the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in the <structfield>capabilities</structfield> field of &v4l2-capability; -returned by the &VIDIOC-QUERYCAP; ioctl. -Any tuner that supports RDS will set the -<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield> -field of &v4l2-tuner;. -Whether an RDS signal is present can be detected by looking at -the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the -<constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para> +returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS +will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in +the <structfield>capability</structfield> field of &v4l2-tuner;. If +the driver only passes RDS blocks without interpreting the data +the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be +set, see <link linkend="reading-rds-data">Reading RDS data</link>. +For future use the +flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been +defined. However, a driver for a radio tuner with this capability does +not yet exist, so if you are planning to write such a driver you +should discuss this on the linux-media mailing list: &v4l-ml;.</para> + + <para> Whether an RDS signal is present can be detected by looking +at the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: +the <constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data +was detected.</para> <para>Devices supporting the RDS output API set the <constant>V4L2_CAP_RDS_OUTPUT</constant> flag in @@ -40,16 +50,31 @@ Any modulator that supports RDS will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield> field of &v4l2-modulator;. In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant> -bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para> - +bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;. +If the driver only passes RDS blocks without interpreting the data +the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the +tuner is capable of handling RDS entities like program identification codes and radio +text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set, +see <link linkend="writing-rds-data">Writing RDS data</link> and +<link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para> </section> - <section> + <section id="reading-rds-data"> <title>Reading RDS data</title> <para>RDS data can be read from the radio device -with the &func-read; function. The data is packed in groups of three bytes, +with the &func-read; function. The data is packed in groups of three bytes.</para> + </section> + + <section id="writing-rds-data"> + <title>Writing RDS data</title> + + <para>RDS data can be written to the radio device +with the &func-write; function. The data is packed in groups of three bytes, as follows:</para> + </section> + + <section> <table frame="none" pgwide="1" id="v4l2-rds-data"> <title>struct <structname>v4l2_rds_data</structname></title> @@ -111,48 +136,57 @@ as follows:</para> <tbody valign="top"> <row> <entry>V4L2_RDS_BLOCK_MSK</entry> + <entry> </entry> <entry>7</entry> <entry>Mask for bits 0-2 to get the block ID.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_A</entry> + <entry> </entry> <entry>0</entry> <entry>Block A.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_B</entry> + <entry> </entry> <entry>1</entry> <entry>Block B.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_C</entry> + <entry> </entry> <entry>2</entry> <entry>Block C.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_D</entry> + <entry> </entry> <entry>3</entry> <entry>Block D.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_C_ALT</entry> + <entry> </entry> <entry>4</entry> <entry>Block C'.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_INVALID</entry> + <entry>read-only</entry> <entry>7</entry> <entry>An invalid block.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_CORRECTED</entry> + <entry>read-only</entry> <entry>0x40</entry> <entry>A bit error was detected but corrected.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_ERROR</entry> + <entry>read-only</entry> <entry>0x80</entry> - <entry>An incorrectable error occurred.</entry> + <entry>An uncorrectable error occurred.</entry> </row> </tbody> </tgroup> diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/v4l/dev-teletext.xml index 76184e8ed618..414b1cfff9f4 100644 --- a/Documentation/DocBook/v4l/dev-teletext.xml +++ b/Documentation/DocBook/v4l/dev-teletext.xml @@ -1,35 +1,32 @@ <title>Teletext Interface</title> - <para>This interface aims at devices receiving and demodulating + <para>This interface was aimed at devices receiving and demodulating Teletext data [<xref linkend="ets300706" />, <xref linkend="itu653" />], evaluating the Teletext packages and storing formatted pages in cache memory. Such devices are usually implemented as microcontrollers with serial -interface (I<superscript>2</superscript>C) and can be found on older +interface (I<superscript>2</superscript>C) and could be found on old TV cards, dedicated Teletext decoding cards and home-brew devices connected to the PC parallel port.</para> - <para>The Teletext API was designed by Martin Buck. It is defined in + <para>The Teletext API was designed by Martin Buck. It was defined in the kernel header file <filename>linux/videotext.h</filename>, the specification is available from <ulink url="ftp://ftp.gwdg.de/pub/linux/misc/videotext/"> ftp://ftp.gwdg.de/pub/linux/misc/videotext/</ulink>. (Videotext is the name of -the German public television Teletext service.) Conventional character -device file names are <filename>/dev/vtx</filename> and -<filename>/dev/vttuner</filename>, with device number 83, 0 and 83, 16 -respectively. A similar interface exists for the Philips SAA5249 -Teletext decoder [specification?] with character device file names -<filename>/dev/tlkN</filename>, device number 102, N.</para> +the German public television Teletext service.)</para> <para>Eventually the Teletext API was integrated into the V4L API with character device file names <filename>/dev/vtx0</filename> to <filename>/dev/vtx31</filename>, device major number 81, minor numbers -192 to 223. For reference the V4L Teletext API specification is -reproduced here in full: "Teletext interfaces talk the existing VTX -API." Teletext devices with major number 83 and 102 will be removed in -Linux 2.6.</para> +192 to 223.</para> - <para>There are no plans to replace the Teletext API or to integrate -it into V4L2. Please write to the linux-media mailing list: &v4l-ml; -when the need arises.</para> + <para>However, teletext decoders were quickly replaced by more +generic VBI demodulators and those dedicated teletext decoders no longer exist. +For many years the vtx devices were still around, even though nobody used +them. So the decision was made to finally remove support for the Teletext API in +kernel 2.6.37.</para> + + <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or +<link linkend="sliced">sliced</link> VBI API.</para> <!-- Local Variables: diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml index 26e879231088..4db272b8a0d3 100644 --- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml @@ -739,7 +739,7 @@ defined in error. Drivers may interpret them as in <xref <entry>b<subscript>1</subscript></entry> <entry>b<subscript>0</subscript></entry> </row> - <row id="V4L2-PIX-FMT-BGR666"> + <row><!-- id="V4L2-PIX-FMT-BGR666" --> <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry> <entry>'BGRH'</entry> <entry></entry> diff --git a/Documentation/DocBook/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/v4l/pixfmt-srggb10.xml new file mode 100644 index 000000000000..7b274092e60c --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-srggb10.xml @@ -0,0 +1,90 @@ + <refentry> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'), + V4L2_PIX_FMT_SGRBG10 ('BA10'), + V4L2_PIX_FMT_SGBRG10 ('GB10'), + V4L2_PIX_FMT_SBGGR10 ('BG10'), + </refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-SRGGB10"><constant>V4L2_PIX_FMT_SRGGB10</constant></refname> + <refname id="V4L2-PIX-FMT-SGRBG10"><constant>V4L2_PIX_FMT_SGRBG10</constant></refname> + <refname id="V4L2-PIX-FMT-SGBRG10"><constant>V4L2_PIX_FMT_SGBRG10</constant></refname> + <refname id="V4L2-PIX-FMT-SBGGR10"><constant>V4L2_PIX_FMT_SBGGR10</constant></refname> + <refpurpose>10-bit Bayer formats expanded to 16 bits</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>The following four pixel formats are raw sRGB / Bayer formats with +10 bits per colour. Each colour component is stored in a 16-bit word, with 6 +unused high bits filled with zeros. Each n-pixel row contains n/2 green samples +and n/2 blue or red samples, with alternating red and blue rows. Bytes are +stored in memory in little endian order. They are conventionally described +as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of these +formats</para> + + <example> + <title><constant>V4L2_PIX_FMT_SBGGR10</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte, high 6 bits in high bytes are 0. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>B<subscript>00low</subscript></entry> + <entry>B<subscript>00high</subscript></entry> + <entry>G<subscript>01low</subscript></entry> + <entry>G<subscript>01high</subscript></entry> + <entry>B<subscript>02low</subscript></entry> + <entry>B<subscript>02high</subscript></entry> + <entry>G<subscript>03low</subscript></entry> + <entry>G<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>G<subscript>10low</subscript></entry> + <entry>G<subscript>10high</subscript></entry> + <entry>R<subscript>11low</subscript></entry> + <entry>R<subscript>11high</subscript></entry> + <entry>G<subscript>12low</subscript></entry> + <entry>G<subscript>12high</subscript></entry> + <entry>R<subscript>13low</subscript></entry> + <entry>R<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>B<subscript>20low</subscript></entry> + <entry>B<subscript>20high</subscript></entry> + <entry>G<subscript>21low</subscript></entry> + <entry>G<subscript>21high</subscript></entry> + <entry>B<subscript>22low</subscript></entry> + <entry>B<subscript>22high</subscript></entry> + <entry>G<subscript>23low</subscript></entry> + <entry>G<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>G<subscript>30low</subscript></entry> + <entry>G<subscript>30high</subscript></entry> + <entry>R<subscript>31low</subscript></entry> + <entry>R<subscript>31high</subscript></entry> + <entry>G<subscript>32low</subscript></entry> + <entry>G<subscript>32high</subscript></entry> + <entry>R<subscript>33low</subscript></entry> + <entry>R<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-srggb8.xml b/Documentation/DocBook/v4l/pixfmt-srggb8.xml new file mode 100644 index 000000000000..2570e3be3cf1 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-srggb8.xml @@ -0,0 +1,67 @@ + <refentry id="V4L2-PIX-FMT-SRGGB8"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_SRGGB8 ('RGGB')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_SRGGB8</constant></refname> + <refpurpose>Bayer RGB format</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is commonly the native format of digital cameras, +reflecting the arrangement of sensors on the CCD device. Only one red, +green or blue value is given for each pixel. Missing components must +be interpolated from neighbouring pixels. From left to right the first +row consists of a red and green value, the second row of a green and +blue value. This scheme repeats to the right and down for every two +columns and rows.</para> + + <example> + <title><constant>V4L2_PIX_FMT_SRGGB8</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>R<subscript>00</subscript></entry> + <entry>G<subscript>01</subscript></entry> + <entry>R<subscript>02</subscript></entry> + <entry>G<subscript>03</subscript></entry> + </row> + <row> + <entry>start + 4:</entry> + <entry>G<subscript>10</subscript></entry> + <entry>B<subscript>11</subscript></entry> + <entry>G<subscript>12</subscript></entry> + <entry>B<subscript>13</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>R<subscript>20</subscript></entry> + <entry>G<subscript>21</subscript></entry> + <entry>R<subscript>22</subscript></entry> + <entry>G<subscript>23</subscript></entry> + </row> + <row> + <entry>start + 12:</entry> + <entry>G<subscript>30</subscript></entry> + <entry>B<subscript>31</subscript></entry> + <entry>G<subscript>32</subscript></entry> + <entry>B<subscript>33</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-y10.xml b/Documentation/DocBook/v4l/pixfmt-y10.xml new file mode 100644 index 000000000000..d065043db8d8 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y10.xml @@ -0,0 +1,79 @@ +<refentry id="V4L2-PIX-FMT-Y10"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_Y10 ('Y10 ')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_Y10</constant></refname> + <refpurpose>Grey-scale image</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is a grey-scale image with a depth of 10 bits per pixel. Pixels +are stored in 16-bit words with unused high bits padded with 0. The least +significant byte is stored at lower memory addresses (little-endian).</para> + + <example> + <title><constant>V4L2_PIX_FMT_Y10</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="9" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>Y'<subscript>00low</subscript></entry> + <entry>Y'<subscript>00high</subscript></entry> + <entry>Y'<subscript>01low</subscript></entry> + <entry>Y'<subscript>01high</subscript></entry> + <entry>Y'<subscript>02low</subscript></entry> + <entry>Y'<subscript>02high</subscript></entry> + <entry>Y'<subscript>03low</subscript></entry> + <entry>Y'<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>Y'<subscript>10low</subscript></entry> + <entry>Y'<subscript>10high</subscript></entry> + <entry>Y'<subscript>11low</subscript></entry> + <entry>Y'<subscript>11high</subscript></entry> + <entry>Y'<subscript>12low</subscript></entry> + <entry>Y'<subscript>12high</subscript></entry> + <entry>Y'<subscript>13low</subscript></entry> + <entry>Y'<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>Y'<subscript>20low</subscript></entry> + <entry>Y'<subscript>20high</subscript></entry> + <entry>Y'<subscript>21low</subscript></entry> + <entry>Y'<subscript>21high</subscript></entry> + <entry>Y'<subscript>22low</subscript></entry> + <entry>Y'<subscript>22high</subscript></entry> + <entry>Y'<subscript>23low</subscript></entry> + <entry>Y'<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>Y'<subscript>30low</subscript></entry> + <entry>Y'<subscript>30high</subscript></entry> + <entry>Y'<subscript>31low</subscript></entry> + <entry>Y'<subscript>31high</subscript></entry> + <entry>Y'<subscript>32low</subscript></entry> + <entry>Y'<subscript>32high</subscript></entry> + <entry>Y'<subscript>33low</subscript></entry> + <entry>Y'<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index c4ad0a8e42dc..d7c467187095 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -566,7 +566,9 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.< &sub-sbggr8; &sub-sgbrg8; &sub-sgrbg8; + &sub-srggb8; &sub-sbggr16; + &sub-srggb10; </section> <section id="yuv-formats"> @@ -589,6 +591,7 @@ information.</para> &sub-packed-yuv; &sub-grey; + &sub-y10; &sub-y16; &sub-yuyv; &sub-uyvy; @@ -685,6 +688,11 @@ http://www.ivtvdriver.org/</ulink></para><para>The format is documented in the kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm12</filename> </para></entry> </row> + <row id="V4L2-PIX-FMT-CPIA1"> + <entry><constant>V4L2_PIX_FMT_CPIA1</constant></entry> + <entry>'CPIA'</entry> + <entry>YUV format used by the gspca cpia1 driver.</entry> + </row> <row id="V4L2-PIX-FMT-SPCA501"> <entry><constant>V4L2_PIX_FMT_SPCA501</constant></entry> <entry>'S501'</entry> @@ -705,11 +713,6 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'S561'</entry> <entry>Compressed GBRG Bayer format used by the gspca driver.</entry> </row> - <row id="V4L2-PIX-FMT-SGRBG10"> - <entry><constant>V4L2_PIX_FMT_SGRBG10</constant></entry> - <entry>'DA10'</entry> - <entry>10 bit raw Bayer, expanded to 16 bits.</entry> - </row> <row id="V4L2-PIX-FMT-SGRBG10DPCM8"> <entry><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></entry> <entry>'DB10'</entry> @@ -770,6 +773,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'S920'</entry> <entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry> </row> + <row id="V4L2-PIX-FMT-SN9C2028"> + <entry><constant>V4L2_PIX_FMT_SN9C2028</constant></entry> + <entry>'SONX'</entry> + <entry>Compressed GBRG bayer format of the gspca sn9c2028 driver.</entry> + </row> <row id="V4L2-PIX-FMT-STV0680"> <entry><constant>V4L2_PIX_FMT_STV0680</constant></entry> <entry>'S680'</entry> @@ -787,6 +795,20 @@ http://www.thedirks.org/winnov/</ulink></para></entry> <entry>'TM60'</entry> <entry><para>Used by Trident tm6000</para></entry> </row> + <row id="V4L2-PIX-FMT-CIT-YYVYUY"> + <entry><constant>V4L2_PIX_FMT_CIT_YYVYUY</constant></entry> + <entry>'CITV'</entry> + <entry><para>Used by xirlink CIT, found at IBM webcams.</para> + <para>Uses one line of Y then 1 line of VYUY</para> + </entry> + </row> + <row id="V4L2-PIX-FMT-KONICA420"> + <entry><constant>V4L2_PIX_FMT_KONICA420</constant></entry> + <entry>'KONI'</entry> + <entry><para>Used by Konica webcams.</para> + <para>YUV420 planar in blocks of 256 pixels.</para> + </entry> + </row> <row id="V4L2-PIX-FMT-YYUV"> <entry><constant>V4L2_PIX_FMT_YYUV</constant></entry> <entry>'YYUV'</entry> diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 7c3c098d5d08..839e93e875ae 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -99,6 +99,7 @@ Remote Controller chapter.</contrib> <year>2007</year> <year>2008</year> <year>2009</year> + <year>2010</year> <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder> </copyright> @@ -110,10 +111,17 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder> <!-- Put document revisions here, newest first. --> <!-- API revisions (changes and additions of defines, enums, structs, ioctls) must be noted in more detail in the history chapter -(compat.sgml), along with the possible impact on existing drivers and +(compat.xml), along with the possible impact on existing drivers and applications. --> <revision> + <revnumber>2.6.37</revnumber> + <date>2010-08-06</date> + <authorinitials>hv</authorinitials> + <revremark>Removed obsolete vtx (videotext) API.</revremark> + </revision> + + <revision> <revnumber>2.6.33</revnumber> <date>2009-12-03</date> <authorinitials>mk</authorinitials> diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 865b06d9e679..325b23b6964c 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -154,23 +154,13 @@ enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> { V4L2_BUF_TYPE_VBI_OUTPUT = 5, V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, -#if 1 /*KEEP*/ +#if 1 /* Experimental */ V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, #endif V4L2_BUF_TYPE_PRIVATE = 0x80, }; -enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> { - V4L2_CTRL_TYPE_INTEGER = 1, - V4L2_CTRL_TYPE_BOOLEAN = 2, - V4L2_CTRL_TYPE_MENU = 3, - V4L2_CTRL_TYPE_BUTTON = 4, - V4L2_CTRL_TYPE_INTEGER64 = 5, - V4L2_CTRL_TYPE_CTRL_CLASS = 6, - V4L2_CTRL_TYPE_STRING = 7, -}; - enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> { V4L2_TUNER_RADIO = 1, V4L2_TUNER_ANALOG_TV = 2, @@ -288,6 +278,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-RGB565">V4L2_PIX_FMT_RGB565</link> v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ #define <link linkend="V4L2-PIX-FMT-RGB555X">V4L2_PIX_FMT_RGB555X</link> v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ #define <link linkend="V4L2-PIX-FMT-RGB565X">V4L2_PIX_FMT_RGB565X</link> v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ +#define <link linkend="V4L2-PIX-FMT-BGR666">V4L2_PIX_FMT_BGR666</link> v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ #define <link linkend="V4L2-PIX-FMT-BGR24">V4L2_PIX_FMT_BGR24</link> v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ #define <link linkend="V4L2-PIX-FMT-RGB24">V4L2_PIX_FMT_RGB24</link> v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ #define <link linkend="V4L2-PIX-FMT-BGR32">V4L2_PIX_FMT_BGR32</link> v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ @@ -295,6 +286,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { /* Grey formats */ #define <link linkend="V4L2-PIX-FMT-GREY">V4L2_PIX_FMT_GREY</link> v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y4">V4L2_PIX_FMT_Y4</link> v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y6">V4L2_PIX_FMT_Y6</link> v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link> v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ #define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link> v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ /* Palette formats */ @@ -330,7 +324,11 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link> v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link> v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ #define <link linkend="V4L2-PIX-FMT-SGRBG8">V4L2_PIX_FMT_SGRBG8</link> v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ -#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */ +#define <link linkend="V4L2-PIX-FMT-SRGGB8">V4L2_PIX_FMT_SRGGB8</link> v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */ +#define <link linkend="V4L2-PIX-FMT-SBGGR10">V4L2_PIX_FMT_SBGGR10</link> v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */ +#define <link linkend="V4L2-PIX-FMT-SGBRG10">V4L2_PIX_FMT_SGBRG10</link> v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */ +#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */ +#define <link linkend="V4L2-PIX-FMT-SRGGB10">V4L2_PIX_FMT_SRGGB10</link> v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */ /* 10bit raw bayer DPCM compressed to 8 bits */ #define <link linkend="V4L2-PIX-FMT-SGRBG10DPCM8">V4L2_PIX_FMT_SGRBG10DPCM8</link> v4l2_fourcc('B', 'D', '1', '0') /* @@ -346,6 +344,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-MPEG">V4L2_PIX_FMT_MPEG</link> v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */ /* Vendor-specific formats */ +#define <link linkend="V4L2-PIX-FMT-CPIA1">V4L2_PIX_FMT_CPIA1</link> v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ #define <link linkend="V4L2-PIX-FMT-WNVA">V4L2_PIX_FMT_WNVA</link> v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ #define <link linkend="V4L2-PIX-FMT-SN9C10X">V4L2_PIX_FMT_SN9C10X</link> v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ #define <link linkend="V4L2-PIX-FMT-SN9C20X-I420">V4L2_PIX_FMT_SN9C20X_I420</link> v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ @@ -358,12 +357,15 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-SPCA561">V4L2_PIX_FMT_SPCA561</link> v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define <link linkend="V4L2-PIX-FMT-PAC207">V4L2_PIX_FMT_PAC207</link> v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ #define <link linkend="V4L2-PIX-FMT-MR97310A">V4L2_PIX_FMT_MR97310A</link> v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ +#define <link linkend="V4L2-PIX-FMT-SN9C2028">V4L2_PIX_FMT_SN9C2028</link> v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ #define <link linkend="V4L2-PIX-FMT-SQ905C">V4L2_PIX_FMT_SQ905C</link> v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define <link linkend="V4L2-PIX-FMT-PJPG">V4L2_PIX_FMT_PJPG</link> v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link> v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link> v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ -#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ #define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link> v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */ +#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ +#define <link linkend="V4L2-PIX-FMT-CIT-YYVYUY">V4L2_PIX_FMT_CIT_YYVYUY</link> v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ +#define <link linkend="V4L2-PIX-FMT-KONICA420">V4L2_PIX_FMT_KONICA420</link> v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ /* * F O R M A T E N U M E R A T I O N @@ -380,7 +382,7 @@ struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link> { #define V4L2_FMT_FLAG_COMPRESSED 0x0001 #define V4L2_FMT_FLAG_EMULATED 0x0002 -#if 1 /*KEEP*/ +#if 1 /* Experimental Frame Size and frame rate enumeration */ /* * F R A M E S I Z E E N U M E R A T I O N @@ -544,6 +546,8 @@ struct <link linkend="v4l2-buffer">v4l2_buffer</link> { #define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ #define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ #define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +/* Buffer is ready, but the data contained within is corrupted. */ +#define V4L2_BUF_FLAG_ERROR 0x0040 #define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ #define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */ @@ -934,6 +938,16 @@ struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link> { #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) +enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> { + V4L2_CTRL_TYPE_INTEGER = 1, + V4L2_CTRL_TYPE_BOOLEAN = 2, + V4L2_CTRL_TYPE_MENU = 3, + V4L2_CTRL_TYPE_BUTTON = 4, + V4L2_CTRL_TYPE_INTEGER64 = 5, + V4L2_CTRL_TYPE_CTRL_CLASS = 6, + V4L2_CTRL_TYPE_STRING = 7, +}; + /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link> { __u32 id; @@ -1018,21 +1032,27 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> { V4L2_COLORFX_NONE = 0, V4L2_COLORFX_BW = 1, V4L2_COLORFX_SEPIA = 2, - V4L2_COLORFX_NEGATIVE = 3, - V4L2_COLORFX_EMBOSS = 4, - V4L2_COLORFX_SKETCH = 5, - V4L2_COLORFX_SKY_BLUE = 6, + V4L2_COLORFX_NEGATIVE = 3, + V4L2_COLORFX_EMBOSS = 4, + V4L2_COLORFX_SKETCH = 5, + V4L2_COLORFX_SKY_BLUE = 6, V4L2_COLORFX_GRASS_GREEN = 7, V4L2_COLORFX_SKIN_WHITEN = 8, - V4L2_COLORFX_VIVID = 9. + V4L2_COLORFX_VIVID = 9, }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) #define V4L2_CID_ROTATE (V4L2_CID_BASE+34) #define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35) + +#define V4L2_CID_CHROMA_GAIN (V4L2_CID_BASE+36) + +#define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37) +#define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38) + /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+36) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+39) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) @@ -1349,6 +1369,8 @@ struct <link linkend="v4l2-modulator">v4l2_modulator</link> { #define V4L2_TUNER_CAP_SAP 0x0020 #define V4L2_TUNER_CAP_LANG1 0x0040 #define V4L2_TUNER_CAP_RDS 0x0080 +#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 +#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -1378,7 +1400,8 @@ struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link> { enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> type; __u32 seek_upward; __u32 wrap_around; - __u32 reserved[8]; + __u32 spacing; + __u32 reserved[7]; }; /* @@ -1433,7 +1456,7 @@ struct <link linkend="v4l2-audioout">v4l2_audioout</link> { * * NOTE: EXPERIMENTAL API */ -#if 1 /*KEEP*/ +#if 1 #define V4L2_ENC_IDX_FRAME_I (0) #define V4L2_ENC_IDX_FRAME_P (1) #define V4L2_ENC_IDX_FRAME_B (2) @@ -1626,6 +1649,38 @@ struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> { }; /* + * E V E N T S + */ + +#define V4L2_EVENT_ALL 0 +#define V4L2_EVENT_VSYNC 1 +#define V4L2_EVENT_EOS 2 +#define V4L2_EVENT_PRIVATE_START 0x08000000 + +/* Payload for V4L2_EVENT_VSYNC */ +struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> { + /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */ + __u8 field; +} __attribute__ ((packed)); + +struct <link linkend="v4l2-event">v4l2_event</link> { + __u32 type; + union { + struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> vsync; + __u8 data[64]; + } u; + __u32 pending; + __u32 sequence; + struct timespec timestamp; + __u32 reserved[9]; +}; + +struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link> { + __u32 type; + __u32 reserved[7]; +}; + +/* * A D V A N C E D D E B U G G I N G * * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! @@ -1720,7 +1775,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) #define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) #define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) -#if 1 /*KEEP*/ +#if 1 #define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link>) #define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link>) #define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link>) @@ -1728,7 +1783,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>) #endif -#if 1 /*KEEP*/ +#if 1 /* Experimental, meant for debugging, testing and internal use. Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. You must be root to use these ioctls. Never use these in applications! */ @@ -1747,6 +1802,9 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>) #define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>) #define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>) +#define VIDIOC_DQEVENT _IOR('V', 89, struct <link linkend="v4l2-event">v4l2_event</link>) +#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>) +#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>) /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml index 3c6784e132f3..d733721a7519 100644 --- a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml @@ -16,8 +16,7 @@ <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-preset; -*<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml index ecc19576bb8f..d5ec6abf0ce2 100644 --- a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml @@ -16,8 +16,7 @@ <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-timings; -*<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_timings *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml index 402229ee06f6..d272f7ab91b8 100644 --- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml @@ -16,7 +16,7 @@ input</refpurpose> <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/v4l/vidioc-querycap.xml index 6ab7e25b31b6..d499da93a450 100644 --- a/Documentation/DocBook/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/v4l/vidioc-querycap.xml @@ -184,7 +184,7 @@ data.</entry> <row> <entry><constant>V4L2_CAP_RDS_CAPTURE</constant></entry> <entry>0x00000100</entry> - <entry>The device supports the <link linkend="rds">RDS</link> interface.</entry> + <entry>The device supports the <link linkend="rds">RDS</link> capture interface.</entry> </row> <row> <entry><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant></entry> @@ -206,6 +206,11 @@ driver capabilities.</para></footnote></entry> hardware frequency seeking.</entry> </row> <row> + <entry><constant>V4L2_CAP_RDS_OUTPUT</constant></entry> + <entry>0x00000800</entry> + <entry>The device supports the <link linkend="rds">RDS</link> output interface.</entry> + </row> + <row> <entry><constant>V4L2_CAP_TUNER</constant></entry> <entry>0x00010000</entry> <entry>The device has some sort of tuner to diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml index 8e0e055ac934..0d5e8283cf32 100644 --- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml @@ -103,8 +103,12 @@ structure. The driver fills the rest of the structure or returns an <structfield>index</structfield> is invalid. Menu items are enumerated by calling <constant>VIDIOC_QUERYMENU</constant> with successive <structfield>index</structfield> values from &v4l2-queryctrl; -<structfield>minimum</structfield> (0) to -<structfield>maximum</structfield>, inclusive.</para> +<structfield>minimum</structfield> to +<structfield>maximum</structfield>, inclusive. Note that it is possible +for <constant>VIDIOC_QUERYMENU</constant> to return an &EINVAL; for some +indices between <structfield>minimum</structfield> and <structfield>maximum</structfield>. +In that case that particular menu item is not supported by this driver. Also note that +the <structfield>minimum</structfield> value is not necessarily 0.</para> <para>See also the examples in <xref linkend="control" />.</para> @@ -139,7 +143,7 @@ string. This information is intended for the user.</entry> <entry><structfield>minimum</structfield></entry> <entry>Minimum value, inclusive. This field gives a lower bound for <constant>V4L2_CTRL_TYPE_INTEGER</constant> controls and the -lowest valid index (always 0) for <constant>V4L2_CTRL_TYPE_MENU</constant> controls. +lowest valid index for <constant>V4L2_CTRL_TYPE_MENU</constant> controls. For <constant>V4L2_CTRL_TYPE_STRING</constant> controls the minimum value gives the minimum length of the string. This length <emphasis>does not include the terminating zero</emphasis>. It may not be valid for any other type of control, including @@ -279,7 +283,7 @@ values which are actually different on the hardware.</entry> </row> <row> <entry><constant>V4L2_CTRL_TYPE_MENU</constant></entry> - <entry>0</entry> + <entry>≥ 0</entry> <entry>1</entry> <entry>N-1</entry> <entry>The control has a menu of N choices. The names of @@ -405,8 +409,10 @@ writing a value will cause the device to carry out a given action <term><errorcode>EINVAL</errorcode></term> <listitem> <para>The &v4l2-queryctrl; <structfield>id</structfield> -is invalid. The &v4l2-querymenu; <structfield>id</structfield> or -<structfield>index</structfield> is invalid.</para> +is invalid. The &v4l2-querymenu; <structfield>id</structfield> is +invalid or <structfield>index</structfield> is out of range (less than +<structfield>minimum</structfield> or greater than <structfield>maximum</structfield>) +or this particular menu item is not supported by the driver.</para> </listitem> </varlistentry> <varlistentry> diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml index 14b3ec7ed75b..c30dcc4232c0 100644 --- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml @@ -51,7 +51,8 @@ <para>Start a hardware frequency seek from the current frequency. To do this applications initialize the <structfield>tuner</structfield>, -<structfield>type</structfield>, <structfield>seek_upward</structfield> and +<structfield>type</structfield>, <structfield>seek_upward</structfield>, +<structfield>spacing</structfield> and <structfield>wrap_around</structfield> fields, and zero out the <structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer @@ -89,7 +90,12 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> </row> <row> <entry>__u32</entry> - <entry><structfield>reserved</structfield>[8]</entry> + <entry><structfield>spacing</structfield></entry> + <entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[7]</entry> <entry>Reserved for future extensions. Drivers and applications must set the array to zero.</entry> </row> diff --git a/Documentation/devices.txt b/Documentation/devices.txt index c58abf1ccc71..eccffe715229 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -1496,9 +1496,6 @@ Your cooperation is appreciated. 64 = /dev/radio0 Radio device ... 127 = /dev/radio63 Radio device - 192 = /dev/vtx0 Teletext device - ... - 223 = /dev/vtx31 Teletext device 224 = /dev/vbi0 Vertical blank interrupt ... 255 = /dev/vbi31 Vertical blank interrupt @@ -2520,6 +2517,12 @@ Your cooperation is appreciated. 8 = /dev/mmcblk1 Second SD/MMC card ... + The start of next SD/MMC card can be configured with + CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe + time using the mmcblk.perdev_minors option. That would + bump the offset between each card to be the configured + value instead of the default 8. + 179 char CCube DVXChip-based PCI products 0 = /dev/dvxirq0 First DVX device 1 = /dev/dvxirq1 Second DVX device diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 350959f4e41b..59690de8ebfe 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -26,7 +26,8 @@ use IO::Handle; "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", - "af9015", "ngene", "az6027"); + "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", + "lme2510c_s7395_old"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -584,6 +585,49 @@ sub az6027{ $firmware; } + +sub lme2510_lg { + my $sourcefile = "LMEBDA_DVBS.sys"; + my $hash = "fc6017ad01e79890a97ec53bea157ed2"; + my $outfile = "dvb-usb-lme2510-lg.fw"; + my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4168, 3841, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395 { + my $sourcefile = "US2A0D.sys"; + my $hash = "b0155a8083fb822a3bd47bc360e74601"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 37248, 3720, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395_old { + my $sourcefile = "LMEBDA_DVBS7395C.sys"; + my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "90430c5b435eb5c6f88fd44a9d950674"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4208, 3881, $outfile); + verify($outfile, $hasho); + $outfile; +} + # --------------------------------------------------------------- # Utilities diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt new file mode 100644 index 000000000000..e175784b89bf --- /dev/null +++ b/Documentation/dvb/lmedm04.txt @@ -0,0 +1,58 @@ +To extract firmware for the DM04/QQBOX you need to copy the +following file(s) to this directory. + +for DM04+/QQBOX LME2510C (Sharp 7395 Tuner) +------------------------------------------- + +The Sharp 7395 driver can be found in windows/system32/driver + +US2A0D.sys (dated 17 Mar 2009) + + +and run +./get_dvb_firmware lme2510c_s7395 + + will produce + dvb-usb-lme2510c-s7395.fw + +An alternative but older firmware can be found on the driver +disk DVB-S_EN_3.5A in BDADriver/driver + +LMEBDA_DVBS7395C.sys (dated 18 Jan 2008) + +and run +./get_dvb_firmware lme2510c_s7395_old + + will produce + dvb-usb-lme2510c-s7395.fw + +-------------------------------------------------------------------- + +The LG firmware can be found on the driver +disk DM04+_5.1A[LG] in BDADriver/driver + +for DM04 LME2510 (LG Tuner) +--------------------------- + +LMEBDA_DVBS.sys (dated 13 Nov 2007) + +and run +./get_dvb_firmware lme2510_lg + + will produce + dvb-usb-lme2510-lg.fw + + +Other LG firmware can be extracted manually from US280D.sys +only found in windows/system32/driver. + +dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw + +for DM04 LME2510C (LG Tuner) +--------------------------- + +dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw + +--------------------------------------------------------------------- + +Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f3da8c0a3af2..d8f36f984faa 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -98,7 +98,7 @@ Who: Pavel Machek <pavel@ucw.cz> --------------------------- What: Video4Linux API 1 ioctls and from Video devices. -When: July 2009 +When: kernel 2.6.38 Files: include/linux/videodev.h Check: include/linux/videodev.h Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6 @@ -116,6 +116,21 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org> --------------------------- +What: Video4Linux obsolete drivers using V4L1 API +When: kernel 2.6.38 +Files: drivers/staging/cpia/* drivers/staging/stradis/* +Check: drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c +Why: There are some drivers still using V4L1 API, despite all efforts we've done + to migrate. Those drivers are for obsolete hardware that the old maintainer + didn't care (or not have the hardware anymore), and that no other developer + could find any hardware to buy. They probably have no practical usage today, + and people with such old hardware could probably keep using an older version + of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody + care enough to port and test them with V4L2 API, they'll be removed on 2.6.38. +Who: Mauro Carvalho Chehab <mchehab@infradead.org> + +--------------------------- + What: sys_sysctl When: September 2010 Option: CONFIG_SYSCTL_SYSCALL @@ -470,29 +485,6 @@ When: April 2011 Why: Superseded by xt_CT Who: Netfilter developer team <netfilter-devel@vger.kernel.org> ---------------------------- - -What: video4linux /dev/vtx teletext API support -When: 2.6.35 -Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c - include/linux/videotext.h -Why: The vtx device nodes have been superseded by vbi device nodes - for many years. No applications exist that use the vtx support. - Of the two i2c drivers that actually support this API the saa5249 - has been impossible to use for a year now and no known hardware - that supports this device exists. The saa5246a is theoretically - supported by the old mxb boards, but it never actually worked. - - In summary: there is no hardware that can use this API and there - are no applications actually implementing this API. - - The vtx support still reserves minors 192-223 and we would really - like to reuse those for upcoming new functionality. In the unlikely - event that new hardware appears that wants to use the functionality - provided by the vtx API, then that functionality should be build - around the sliced VBI API instead. -Who: Hans Verkuil <hverkuil@xs4all.nl> - ---------------------------- What: IRQF_DISABLED diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 4303614b5add..8c624a18f67d 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -96,8 +96,6 @@ seq_file.txt - how to use the seq_file API sharedsubtree.txt - a description of shared subtrees for namespaces. -smbfs.txt - - info on using filesystems with the SMB protocol (Win 3.11 and NT). spufs.txt - info and mount options for the SPU filesystem used on Cell. sysfs-pci.txt diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt index f9765e8cf086..b22abba78fed 100644 --- a/Documentation/filesystems/9p.txt +++ b/Documentation/filesystems/9p.txt @@ -111,7 +111,7 @@ OPTIONS This can be used to share devices/named pipes/sockets between hosts. This functionality will be expanded in later versions. - access there are three access modes. + access there are four access modes. user = if a user tries to access a file on v9fs filesystem for the first time, v9fs sends an attach command (Tattach) for that user. @@ -120,6 +120,8 @@ OPTIONS the files on the mounted filesystem any = v9fs does single attach and performs all operations as one user + client = ACL based access check on the 9p client + side for access validation cachetag cache tag to use the specified persistent cache. cache tags for existing cache sessions can be listed at diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt deleted file mode 100644 index 194fb0decd2c..000000000000 --- a/Documentation/filesystems/smbfs.txt +++ /dev/null @@ -1,8 +0,0 @@ -Smbfs is a filesystem that implements the SMB protocol, which is the -protocol used by Windows for Workgroups, Windows 95 and Windows NT. -Smbfs was inspired by Samba, the program written by Andrew Tridgell -that turns any Unix host into a file server for DOS or Windows clients. - -Smbfs is a SMB client, but uses parts of samba for its operation. For -more info on samba, including documentation, please go to -http://www.samba.org/ and then on to your nearest mirror. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 8d08bf0d38ed..38425f0f2645 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -22,6 +22,10 @@ Supported chips: Prefix: 'it8720' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8721F/IT8758E + Prefix: 'it8721' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -67,7 +71,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8720F, IT8726F and SiS950 chips. +IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -86,14 +90,15 @@ the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for -2 additional fans. The additional fans are supported by the driver. +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions +have support for 2 additional fans. The additional fans are supported by the +driver. -The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have -optional 16-bit tachometer counters for fans 1 to 3. This is better (no more -fan clock divider mess) but not compatible with the older chips and -revisions. The 16-bit tachometer mode is enabled by the driver when one -of the above chips is detected. +The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and +IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This +is better (no more fan clock divider mess) but not compatible with the older +chips and revisions. The 16-bit tachometer mode is enabled by the driver when +one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F @@ -115,7 +120,12 @@ alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. Note that minimum in this case always means 'closest to zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of -0.016 volt. The battery voltage in8 does not have limit registers. +0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does +not have limit registers. + +On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside +the chip (in7, in8 and optionally in3). The driver handles this transparently +so user-space doesn't have to care. The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index b98e0e0d1910..239258a63c81 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -14,6 +14,10 @@ Supported chips: Prefix: 'adt7463' Addresses scanned: I2C 0x2c, 0x2d, 0x2e Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463 + * Analog Devices ADT7468 + Prefix: 'adt7468' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468 * SMSC EMC6D100, SMSC EMC6D101 Prefix: 'emc6d100' Addresses scanned: I2C 0x2c, 0x2d, 0x2e @@ -34,7 +38,7 @@ Description ----------- This driver implements support for the National Semiconductor LM85 and -compatible chips including the Analog Devices ADM1027, ADT7463 and +compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and SMSC EMC6D10x chips family. The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 @@ -87,14 +91,22 @@ To smooth the response of fans to changes in temperature, the LM85 has an optional filter for smoothing temperatures. The ADM1027 has the same config option but uses it to rate limit the changes to fan speed instead. -The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure -temperatures with 0.25 degC resolution. They also provide an offset to the -temperature readings that is automatically applied during measurement. -This offset can be used to zero out any errors due to traces and placement. -The documentation says that the offset is in 0.25 degC steps, but in -initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has -confirmed this "bug". The ADT7463 is reported to work as described in the -documentation. The current lm85 driver does not show the offset register. +The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore +measure temperatures with 0.25 degC resolution. They also provide an offset +to the temperature readings that is automatically applied during +measurement. This offset can be used to zero out any errors due to traces +and placement. The documentation says that the offset is in 0.25 degC +steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog +Devices has confirmed this "bug". The ADT7463 is reported to work as +described in the documentation. The current lm85 driver does not show the +offset register. + +The ADT7468 has a high-frequency PWM mode, where all PWM outputs are +driven by a 22.5 kHz clock. This is a global mode, not per-PWM output, +which means that setting any PWM frequency above 11.3 kHz will switch +all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM +frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency +between 10 and 100 Hz, which can then be tuned separately. See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. @@ -125,17 +137,17 @@ datasheet for a complete description of the differences. Other than identifying the chip, the driver behaves no differently with regard to these two chips. The LM85B is recommended for new designs. -The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be -used to signal the chipset in case a limit is exceeded or the temperature -sensors fail. Individual sensor interrupts can be masked so they won't -trigger SMBALERT. The SMBALERT output if configured replaces one of the other -functions (PWM2 or IN0). This functionality is not implemented in current -driver. +The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output +that can be used to signal the chipset in case a limit is exceeded or the +temperature sensors fail. Individual sensor interrupts can be masked so +they won't trigger SMBALERT. The SMBALERT output if configured replaces one +of the other functions (PWM2 or IN0). This functionality is not implemented +in current driver. -The ADT7463 also has an optional THERM output/input which can be connected -to the processor PROC_HOT output. If available, the autofan control -dynamic Tmin feature can be enabled to keep the system temperature within -spec (just?!) with the least possible fan noise. +The ADT7463 and ADT7468 also have an optional THERM output/input which can +be connected to the processor PROC_HOT output. If available, the autofan +control dynamic Tmin feature can be enabled to keep the system temperature +within spec (just?!) with the least possible fan noise. Configuration Notes ------------------- @@ -201,8 +213,8 @@ the temperatures to compensate for systemic errors in the measurements. These features are not currently supported by the lm85 driver. -In addition to the ADM1027 features, the ADT7463 also has Tmin control -and THERM asserted counts. Automatic Tmin control acts to adjust the -Tmin value to maintain the measured temperature sensor at a specified -temperature. There isn't much documentation on this feature in the -ADT7463 data sheet. This is not supported by current driver. +In addition to the ADM1027 features, the ADT7463 and ADT7468 also have +Tmin control and THERM asserted counts. Automatic Tmin control acts to +adjust the Tmin value to maintain the measured temperature sensor at a +specified temperature. There isn't much documentation on this feature in +the ADT7463 data sheet. This is not supported by current driver. diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 6a03dd4bcc94..fa475c0a48a3 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -63,8 +63,8 @@ Supported chips: Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 * Maxim MAX6659 - Prefix: 'max6657' - Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e) + Prefix: 'max6659' + Addresses scanned: I2C 0x4c, 0x4d, 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 * Maxim MAX6680 @@ -84,6 +84,21 @@ Supported chips: Addresses scanned: I2C 0x4c Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + * Maxim MAX6695 + Prefix: 'max6695' + Addresses scanned: I2C 0x18 + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Maxim MAX6696 + Prefix: 'max6695' + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + 0x4c, 0x4d and 0x4e + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Winbond/Nuvoton W83L771W/G + Prefix: 'w83l771' + Addresses scanned: I2C 0x4c + Datasheet: No longer available * Winbond/Nuvoton W83L771AWG/ASG Prefix: 'w83l771' Addresses scanned: I2C 0x4c @@ -101,10 +116,11 @@ well as the temperature of up to one external diode. It is compatible with many other devices, many of which are supported by this driver. Note that there is no easy way to differentiate between the MAX6657, -MAX6658 and MAX6659 variants. The extra address and features of the -MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only -differ in their pinout, therefore they obviously can't (and don't need to) -be distinguished. +MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only +supported by this driver if the chip is located at address 0x4d or 0x4e, +or if the chip type is explicitly selected as max6659. +The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously +can't (and don't need to) be distinguished. The specificity of this family of chipsets over the ADM1021/LM84 family is that it features critical limits with hysteresis, and an @@ -151,11 +167,21 @@ MAX6680 and MAX6681: * Selectable address * Remote sensor type selection +MAX6695 and MAX6696: + * Better local resolution + * Selectable address (max6696) + * Second critical temperature limit + * Two remote sensors + +W83L771W/G + * The G variant is lead-free, otherwise similar to the W. + * Filter and alert configuration register at 0xBF + * Moving average (depending on conversion rate) + W83L771AWG/ASG + * Successor of the W83L771W/G, same features. * The AWG and ASG variants only differ in package format. - * Filter and alert configuration register at 0xBF * Diode ideality factor configuration (remote sensor) at 0xE3 - * Moving average (depending on conversion rate) All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591 index e76a7892f68e..ac020b3bb7b3 100644 --- a/Documentation/hwmon/pcf8591 +++ b/Documentation/hwmon/pcf8591 @@ -4,7 +4,7 @@ Kernel driver pcf8591 Supported chips: * Philips/NXP PCF8591 Prefix: 'pcf8591' - Addresses scanned: I2C 0x48 - 0x4f + Addresses scanned: none Datasheet: Publicly available at the NXP website http://www.nxp.com/pip/PCF8591_6.html @@ -58,18 +58,16 @@ Module parameters Accessing PCF8591 via /sys interface ------------------------------------- -! Be careful ! -The PCF8591 is plainly impossible to detect! Stupid chip. -So every chip with address in the interval [0x48..0x4f] is -detected as PCF8591. If you have other chips in this address -range, the workaround is to load this module after the one -for your others chips. +The PCF8591 is plainly impossible to detect! Thus the driver won't even +try. You have to explicitly instantiate the device at the relevant +address (in the interval [0x48..0x4f]) either through platform data, or +using the sysfs interface. See Documentation/i2c/instantiating-devices +for details. -On detection (i.e. insmod, modprobe et al.), directories are being -created for each detected PCF8591: +Directories are being created for each instantiated PCF8591: /sys/bus/i2c/devices/<0>-<1>/ -where <0> is the bus the chip was detected on (e. g. i2c-0) +where <0> is the bus the chip is connected to (e. g. i2c-0) and <1> the chip address ([48..4f]) Inside these directories, there are such files: diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 48ceabedf55d..645699010551 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -309,6 +309,20 @@ temp[1-*]_crit_hyst from the critical value. RW +temp[1-*]_emergency + Temperature emergency max value, for chips supporting more than + two upper temperature limits. Must be equal or greater than + corresponding temp_crit values. + Unit: millidegree Celsius + RW + +temp[1-*]_emergency_hyst + Temperature hysteresis value for emergency limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta + from the emergency value. + RW + temp[1-*]_lcrit Temperature critical min value, typically lower than corresponding temp_min values. Unit: millidegree Celsius @@ -505,6 +519,7 @@ fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm temp[1-*]_crit_alarm +temp[1-*]_emergency_alarm Limit alarm 0: no alarm 1: alarm diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 33223ff121d8..63ffd78824d8 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -259,7 +259,7 @@ Code Seq#(hex) Include File Comments 't' 00-7F linux/if_ppp.h 't' 80-8F linux/isdn_ppp.h 't' 90 linux/toshiba.h -'u' 00-1F linux/smb_fs.h +'u' 00-1F linux/smb_fs.h gone 'v' all linux/videodev.h conflict! 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! @@ -278,7 +278,6 @@ Code Seq#(hex) Include File Comments <mailto:oe@port.de> 'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! 0x80 00-1F linux/fb.h -0x81 00-1F linux/videotext.h 0x88 00-3F media/ovcamchip.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4bc2f3c3da5b..ed45e9802aa8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2175,6 +2175,11 @@ and is between 256 and 4096 characters. It is defined in the file reset_devices [KNL] Force drivers to reset the underlying device during initialization. + resource_alloc_from_bottom + Allocate new resources from the beginning of available + space, not the end. If you need to use this, please + report a bug. + resume= [SWSUSP] Specify the partition device for software suspend diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index f2510541373b..42517d9121de 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -83,3 +83,4 @@ 82 -> WinFast DTV2000 H rev. J [107d:6f2b] 83 -> Prof 7301 DVB-S/S2 [b034:3034] 84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd] + 85 -> Twinhan VP-1027 DVB-S [1822:0023] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 5c568757c301..ac2616a62fc3 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -31,6 +31,7 @@ 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) 31 -> Usbgear VD204v9 (em2821) 32 -> Supercomp USB 2.0 TV (em2821) + 33 -> Elgato Video Capture (em2860) [0fd9:0033] 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] 35 -> Typhoon DVD Maker (em2860) 36 -> NetGMBH Cam (em2860) @@ -45,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] + 48 -> KWorld DVB-T 310U (em2880) 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 4000c29fcfb6..8d9afc7d8014 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -126,7 +126,7 @@ 125 -> Beholder BeholdTV 409 [0000:4090] 126 -> Beholder BeholdTV 505 FM [5ace:5050] 127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090] -128 -> Beholder BeholdTV Columbus TVFM [0000:5201] +128 -> Beholder BeholdTV Columbus TV/FM [0000:5201] 129 -> Beholder BeholdTV 607 FM [5ace:6070] 130 -> Beholder BeholdTV M6 [5ace:6190] 131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022] diff --git a/Documentation/video4linux/bttv/MAKEDEV b/Documentation/video4linux/bttv/MAKEDEV index 9d112f7fd5f7..093c0cd18042 100644 --- a/Documentation/video4linux/bttv/MAKEDEV +++ b/Documentation/video4linux/bttv/MAKEDEV @@ -19,7 +19,6 @@ function makedev () { echo "*** new device names ***" makedev video 0 makedev radio 64 -makedev vtx 192 makedev vbi 224 #echo "*** old device names (for compatibility only) ***" diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 56ba7bba7168..6a562eeeb4cd 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -302,12 +302,14 @@ sonixj 0c45:60fb Surfer NoName sonixj 0c45:60fc LG-LIC300 sonixj 0c45:60fe Microdia Audio sonixj 0c45:6100 PC Camera (SN9C128) +sonixj 0c45:6102 PC Camera (SN9C128) sonixj 0c45:610a PC Camera (SN9C128) sonixj 0c45:610b PC Camera (SN9C128) sonixj 0c45:610c PC Camera (SN9C128) sonixj 0c45:610e PC Camera (SN9C128) sonixj 0c45:6128 Microdia/Sonix SNP325 sonixj 0c45:612a Avant Camera +sonixj 0c45:612b Speed-Link REFLECT2 sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index e831aaca66f8..f22f35c271f3 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -44,8 +44,8 @@ All drivers have the following structure: 2) A way of initializing and commanding sub-devices (if any). -3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and - /dev/vtxX) and keeping track of device-node specific data. +3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX) + and keeping track of device-node specific data. 4) Filehandle-specific structs containing per-filehandle data; @@ -192,6 +192,11 @@ You also need a way to go from the low-level struct to v4l2_subdev. For the common i2c_client struct the i2c_set_clientdata() call is used to store a v4l2_subdev pointer, for other busses you may have to use other methods. +Bridges might also need to store per-subdev private data, such as a pointer to +bridge-specific per-subdev private data. The v4l2_subdev structure provides +host private data for that purpose that can be accessed with +v4l2_get_subdev_hostdata() and v4l2_set_subdev_hostdata(). + From the bridge driver perspective you load the sub-device module and somehow obtain the v4l2_subdev pointer. For i2c devices this is easy: you call i2c_get_clientdata(). For other busses something similar needs to be done. @@ -448,6 +453,10 @@ You should also set these fields: - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. +- lock: leave to NULL if you want to do all the locking in the driver. + Otherwise you give it a pointer to a struct mutex_lock and before any + of the v4l2_file_operations is called this lock will be taken by the + core and released afterwards. - parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. @@ -464,6 +473,22 @@ If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used. +v4l2_file_operations and locking +-------------------------------- + +You can set a pointer to a mutex_lock in struct video_device. Usually this +will be either a top-level mutex or a mutex per device node. If you want +finer-grained locking then you have to set it to NULL and do you own locking. + +If a lock is specified then all file operations will be serialized on that +lock. If you use videobuf then you must pass the same lock to the videobuf +queue initialize function: if videobuf has to wait for a frame to arrive, then +it will temporarily unlock the lock and relock it afterwards. If your driver +also waits in the code, then you should do the same to allow other processes +to access the device node while the first process is waiting for something. + +The implementation of a hotplug disconnect should also take the lock before +calling v4l2_device_disconnect. video_device registration ------------------------- @@ -483,7 +508,6 @@ types exist: VFL_TYPE_GRABBER: videoX for video input/output devices VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext) VFL_TYPE_RADIO: radioX for radio tuners -VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use) The last argument gives you a certain amount of control over the device device node number used (i.e. the X in videoX). Normally you will pass -1 @@ -547,9 +571,8 @@ from /dev). After video_unregister_device() returns no new opens can be done. However, in the case of USB devices some application might still have one of these -device nodes open. So after the unregister all file operations will return -an error as well, except for the ioctl and unlocked_ioctl file operations: -those will still be passed on since some buffer ioctls may still be needed. +device nodes open. So after the unregister all file operations (except +release, of course) will return an error as well. When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there. |