diff options
Diffstat (limited to 'Documentation')
5 files changed, 63 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file mode 100644 index 000000000000..a388005842ad --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -0,0 +1,47 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; + diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index a02e2fe2bfb2..732339275848 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -31,7 +31,7 @@ properties: If that property is used, the number of chip selects will be increased automatically with max(cs-gpios, hardware chip selects). - So if, for example, the controller has 2 CS lines, and the + So if, for example, the controller has 4 CS lines, and the cs-gpios looks like this cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt index e8f1d627d288..69dc5d57b1ef 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt @@ -3,9 +3,8 @@ Required properties: - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", "fsl,imx7d-qspi", "fsl,imx6ul-qspi", - "fsl,ls1021a-qspi" + "fsl,ls1021a-qspi", "fsl,ls2080a-qspi" or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length @@ -34,7 +33,11 @@ qspi0: quadspi@40044000 { clock-names = "qspi_en", "qspi"; flash0: s25fl128s@0 { - .... + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index c0f6c8ecfa2e..3a8079eb18c8 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -5,6 +5,7 @@ Required properties: - mediatek,mt2701-spi: for mt2701 platforms - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt6765-spi: for mt6765 platforms - mediatek,mt7622-spi: for mt7622 platforms - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms - mediatek,mt8135-spi: for mt8135 platforms diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt index 8de589b376ce..2567c829e2dc 100644 --- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt +++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt @@ -25,18 +25,23 @@ data by ADI software channels at the same time, or two parallel routine of setti ADI registers will make ADI controller registers chaos to lead incorrect results. Then we need one hardware spinlock to synchronize between the multiple subsystems. +The new version ADI controller supplies multiple master channels for different +subsystem accessing, that means no need to add hardware spinlock to synchronize, +thus change the hardware spinlock support to be optional to keep backward +compatibility. + Required properties: - compatible: Should be "sprd,sc9860-adi". - reg: Offset and length of ADI-SPI controller register space. -- hwlocks: Reference to a phandle of a hwlock provider node. -- hwlock-names: Reference to hwlock name strings defined in the same order - as the hwlocks, should be "adi". - #address-cells: Number of cells required to define a chip select address on the ADI-SPI bus. Should be set to 1. - #size-cells: Size of cells required to define a chip select address size on the ADI-SPI bus. Should be set to 0. Optional properties: +- hwlocks: Reference to a phandle of a hwlock provider node. +- hwlock-names: Reference to hwlock name strings defined in the same order + as the hwlocks, should be "adi". - sprd,hw-channels: This is an array of channel values up to 49 channels. The first value specifies the hardware channel id which is used to transfer data triggered by hardware automatically, and the second |