diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/dvb/bt8xx.txt | 32 | ||||
| -rw-r--r-- | Documentation/dvb/get_dvb_firmware | 63 | ||||
| -rw-r--r-- | Documentation/dvb/opera-firmware.txt | 27 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.bttv | 4 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.cx88 | 1 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.saa7134 | 1 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.tuner | 3 | ||||
| -rw-r--r-- | Documentation/video4linux/sn9c102.txt | 3 | ||||
| -rw-r--r-- | Documentation/video4linux/zr364xx.txt | 2 |
9 files changed, 118 insertions, 18 deletions
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index 4e7614e606c5..ecb47adda063 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -9,19 +9,29 @@ for accessing the i2c bus and the gpio pins of the bt8xx chipset. Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge: Compiling kernel please enable: -a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux" -b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" - => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards" +a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)" +b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video Capture Adapters" => "BT848 Video For Linux" +c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards" -2) Loading Modules -================== +Please use the following options with care as deselection of drivers which are in fact necessary +may result in DVB devices that cannot be tuned due to lack of driver support: +You can save RAM by deselecting every frontend module that your DVB card does not need. + +First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling: +d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as needed" -In default cases bttv is loaded automatically. -To load the backend either place dvb-bt8xx in etc/modules, or apply manually: +If you know the frontend driver that your card needs please enable: +e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise the frontend modules to build" + Then please select your card-specific frontend module. - $ modprobe dvb-bt8xx +2) Loading Modules +================== -All frontends will be loaded automatically. +Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically. +Exceptions are: +- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom. People running udev please see Documentation/dvb/udev.txt. In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary: @@ -30,7 +40,6 @@ In the following cases overriding the PCI type detection for dvb-bt8xx might be ------------------------------ $ modprobe bttv card=113 - $ modprobe dvb-bt8xx $ modprobe dst Useful parameters for verbosity level and debugging the dst module: @@ -65,10 +74,9 @@ DViCO FusionHDTV 5 Lite: 135 Notice: The order of the card ID should be uprising: Example: $ modprobe bttv card=113 card=135 - $ modprobe dvb-bt8xx For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv. -In case of further problems send questions to the mailing list: www.linuxdvb.org. +In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. Authors: Richard Walker, Jamie Honan, diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 4820366b6ae8..b4d306ae9234 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -24,7 +24,8 @@ use IO::Handle; @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", - "or51211", "or51132_qam", "or51132_vsb", "bluebird"); + "or51211", "or51132_qam", "or51132_vsb", "bluebird", + "opera1"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -56,7 +57,7 @@ syntax(); sub sp8870 { my $sourcefile = "tt_Premium_217g.zip"; - my $url = "http://www.technotrend.de/new/217g/$sourcefile"; + my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile"; my $hash = "53970ec17a538945a6d8cb608a7b3899"; my $outfile = "dvb-fe-sp8870.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -210,6 +211,45 @@ sub dec3000s { $outfile; } +sub opera1{ + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + + checkstandard(); + my $fwfile1="dvb-usb-opera1-fpga-01.fw"; + my $fwfile2="dvb-usb-opera-01.fw"; + extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw"); + extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1"); + extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2"); + delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1"); + delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1"); + verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70"); + verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1"); + verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d"); + + my $RES1="\x01\x92\x7f\x00\x01\x00"; + my $RES0="\x01\x92\x7f\x00\x00\x00"; + my $DAT1="\x01\x00\xe6\x00\x01\x00"; + my $DAT0="\x01\x00\xe6\x00\x00\x00"; + open FW,">$tmpdir/opera.fw"; + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part1-1"); + print FW "$RES0"; + print FW "$DAT0"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part2-1"); + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES0"; + print FW "$DAT0"; + copy ("$tmpdir/opera1-fpga.fw",$fwfile1); + copy ("$tmpdir/opera.fw",$fwfile2); + + $fwfile1.",".$fwfile2; +} sub vp7041 { my $sourcefile = "2.422.zip"; @@ -440,6 +480,25 @@ sub appendfile { close(INFILE); } +sub delzero{ + my ($infile,$outfile) =@_; + + open INFILE,"<$infile"; + open OUTFILE,">$outfile"; + while (1){ + $rcount=sysread(INFILE,$buf,22); + $len=ord(substr($buf,0,1)); + print OUTFILE substr($buf,0,1); + print OUTFILE substr($buf,2,$len+3); + last if ($rcount<1); + printf OUTFILE "%c",0; +#print $len." ".length($buf)."\n"; + + } + close(INFILE); + close(OUTFILE); +} + sub syntax() { print STDERR "syntax: get_dvb_firmware <component>\n"; print STDERR "Supported components:\n"; diff --git a/Documentation/dvb/opera-firmware.txt b/Documentation/dvb/opera-firmware.txt new file mode 100644 index 000000000000..93e784c2607b --- /dev/null +++ b/Documentation/dvb/opera-firmware.txt @@ -0,0 +1,27 @@ +To extract the firmware for the Opera DVB-S1 USB-Box +you need to copy the files: + +2830SCap2.sys +2830SLoad2.sys + +from the windriver disk into this directory. + +Then run + +./get_dvb_firware opera1 + +and after that you have 2 files: + +dvb-usb-opera-01.fw +dvb-usb-opera1-fpga-01.fw + +in here. + +Copy them into /lib/firmware/ . + +After that the driver can load the firmware +(if you have enabled firmware loading +in kernel config and have hotplug running). + + +Marco Gittler <g.marco@freenet.de>
\ No newline at end of file diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index b60639130a51..177159c5f4c4 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -66,7 +66,7 @@ 65 -> Lifeview FlyVideo 2000S LR90 66 -> Terratec TValueRadio [153b:1135,153b:ff3b] 67 -> IODATA GV-BCTV4/PCI [10fc:4050] - 68 -> 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) [121a:3000,10b4:2637] + 68 -> 3Dfx VoodooTV FM (Euro) [10b4:2637] 69 -> Active Imaging AIMMS 70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E) 71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851] @@ -145,3 +145,5 @@ 144 -> MagicTV 145 -> SSAI Security Video Interface [4149:5353] 146 -> SSAI Ultrasound Video Interface [414a:5353] +147 -> VoodooTV 200 (USA) [121a:3000] +148 -> DViCO FusionHDTV 2 [dbc0:d200] diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 60f838beb9c8..82ac8250e978 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -55,3 +55,4 @@ 54 -> Norwood Micro TV Tuner 55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980] 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602] + 57 -> ADS Tech Instant Video PCI [1421:0390] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 712e8c8333cc..3f8aeab50a10 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -114,3 +114,4 @@ 113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6] 114 -> KWorld DVB-T 210 [17de:7250] 115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] +116 -> 10MOONS TM300 TV Card [1131:2304] diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 44134f04b82a..a88c02d23805 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -40,7 +40,7 @@ tuner=38 - Philips PAL/SECAM multi (FM1216ME MK3) tuner=39 - LG NTSC (newer TAPC series) tuner=40 - HITACHI V7-J180AT tuner=41 - Philips PAL_MK (FI1216 MK) -tuner=42 - Philips 1236D ATSC/NTSC dual in +tuner=42 - Philips FCV1236D ATSC/NTSC dual in tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F) tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant) tuner=45 - Microtune 4049 FM5 @@ -72,3 +72,4 @@ tuner=70 - Samsung TCPN 2121P30A tuner=71 - Xceive xc3028 tuner=72 - Thomson FE6600 tuner=73 - Samsung TCPG 6121P30A +tuner=75 - Philips TEA5761 FM Radio diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index 279717c96f63..1ffad19ce891 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -436,7 +436,7 @@ HV7131D Hynix Semiconductor | Yes No No No HV7131R Hynix Semiconductor | No Yes Yes Yes MI-0343 Micron Technology | Yes No No No MI-0360 Micron Technology | No Yes Yes Yes -OV7630 OmniVision Technologies | Yes Yes No No +OV7630 OmniVision Technologies | Yes Yes Yes Yes OV7660 OmniVision Technologies | No No Yes Yes PAS106B PixArt Imaging | Yes No No No PAS202B PixArt Imaging | Yes Yes No No @@ -583,6 +583,7 @@ order): - Bertrik Sikken, who reverse-engineered and documented the Huffman compression algorithm used in the SN9C101, SN9C102 and SN9C103 controllers and implemented the first decoder; +- Ronny Standke for the donation of a webcam; - Mizuno Takafumi for the donation of a webcam; - an "anonymous" donator (who didn't want his name to be revealed) for the donation of a webcam. diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt index c76992d0ff4d..4d9a0c33f2fd 100644 --- a/Documentation/video4linux/zr364xx.txt +++ b/Documentation/video4linux/zr364xx.txt @@ -62,4 +62,4 @@ Vendor Product Distributor Model 0x0784 0x0040 Traveler Slimline X5 0x06d6 0x0034 Trust Powerc@m 750 0x0a17 0x0062 Pentax Optio 50L - +0x06d6 0x003b Trust Powerc@m 970Z |