diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/ab8500.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/tty/serial/of-serial.txt | 3 | ||||
| -rw-r--r-- | Documentation/hwmon/lm75 | 2 | ||||
| -rw-r--r-- | Documentation/i2c/busses/i2c-diolan-u2c | 2 | ||||
| -rw-r--r-- | Documentation/input/alps.txt | 67 | ||||
| -rw-r--r-- | Documentation/networking/ipvs-sysctl.txt | 7 | ||||
| -rw-r--r-- | Documentation/networking/tuntap.txt | 77 | ||||
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 7 | ||||
| -rw-r--r-- | Documentation/sound/alsa/seq_oss.html | 2 | ||||
| -rw-r--r-- | Documentation/trace/ftrace.txt | 2 |
10 files changed, 155 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 13b707b7355c..c3a14e0ad0ad 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -13,9 +13,6 @@ Required parent device properties: 4 = active high level-sensitive 8 = active low level-sensitive -Optional parent device properties: -- reg : contains the PRCMU mailbox address for the AB8500 i2c port - The AB8500 consists of a large and varied group of sub-devices: Device IRQ Names Supply Names Description @@ -86,9 +83,8 @@ Non-standard child device properties: - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) -ab8500@5 { +ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 1e1145ca4f3c..8f01cb190f25 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -11,6 +11,9 @@ Required properties: - "nvidia,tegra20-uart" - "nxp,lpc3220-uart" - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index c91a1d15fa28..69af1c7db6b7 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -23,7 +23,7 @@ Supported chips: Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/ * Microchip (TelCom) TCN75 - Prefix: 'lm75' + Prefix: 'tcn75' Addresses scanned: none Datasheet: Publicly available at the Microchip website http://www.microchip.com/ diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c index 30fe4bb9a069..0d6018c316c7 100644 --- a/Documentation/i2c/busses/i2c-diolan-u2c +++ b/Documentation/i2c/busses/i2c-diolan-u2c @@ -5,7 +5,7 @@ Supported adapters: Documentation: http://www.diolan.com/i2c/u2c12.html -Author: Guenter Roeck <guenter.roeck@ericsson.com> +Author: Guenter Roeck <linux@roeck-us.net> Description ----------- diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index 3262b6e4d686..e544c7ff8cfa 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -3,10 +3,26 @@ ALPS Touchpad Protocol Introduction ------------ - -Currently the ALPS touchpad driver supports four protocol versions in use by -ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various -protocol versions is contained in the following sections. +Currently the ALPS touchpad driver supports five protocol versions in use by +ALPS touchpads, called versions 1, 2, 3, 4 and 5. + +Since roughly mid-2010 several new ALPS touchpads have been released and +integrated into a variety of laptops and netbooks. These new touchpads +have enough behavior differences that the alps_model_data definition +table, describing the properties of the different versions, is no longer +adequate. The design choices were to re-define the alps_model_data +table, with the risk of regression testing existing devices, or isolate +the new devices outside of the alps_model_data table. The latter design +choice was made. The new touchpad signatures are named: "Rushmore", +"Pinnacle", and "Dolphin", which you will see in the alps.c code. +For the purposes of this document, this group of ALPS touchpads will +generically be called "new ALPS touchpads". + +We experimented with probing the ACPI interface _HID (Hardware ID)/_CID +(Compatibility ID) definition as a way to uniquely identify the +different ALPS variants but there did not appear to be a 1:1 mapping. +In fact, it appeared to be an m:n mapping between the _HID and actual +hardware type. Detection --------- @@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is matched against known models in the alps_model_data_array. -With protocol versions 3 and 4, the E7 report model signature is always -73-02-64. To differentiate between these versions, the response from the -"Enter Command Mode" sequence must be inspected as described below. +For older touchpads supporting protocol versions 3 and 4, the E7 report +model signature is always 73-02-64. To differentiate between these +versions, the response from the "Enter Command Mode" sequence must be +inspected as described below. + +The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but +seem to be better differentiated by the EC Command Mode response. Command Mode ------------ @@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the register. Registers are written by writing the value one nibble at a time using the same encoding used for addresses. +For the new ALPS touchpads, the EC command is used to enter command +mode. The response in the new ALPS touchpads is significantly different, +and more important in determining the behavior. This code has been +separated from the original alps_model_data table and put in the +alps_identify function. For example, there seem to be two hardware init +sequences for the "Dolphin" touchpads as determined by the second byte +of the EC response. + Packet Format ------------- @@ -187,3 +215,28 @@ There are several things worth noting here. well. So far no v4 devices with tracksticks have been encountered. + +ALPS Absolute Mode - Protocol Version 5 +--------------------------------------- +This is basically Protocol Version 3 but with different logic for packet +decode. It uses the same alps_process_touchpad_packet_v3 call with a +specialized decode_fields function pointer to correctly interpret the +packets. This appears to only be used by the Dolphin devices. + +For single-touch, the 6-byte packet format is: + + byte 0: 1 1 0 0 1 0 0 0 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 y6 y5 y4 y3 y2 y1 y0 + byte 3: 0 M R L 1 m r l + byte 4: y10 y9 y8 y7 x10 x9 x8 x7 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +For mt, the format is: + + byte 0: 1 1 1 n3 1 n2 n1 x24 + byte 1: 1 y7 y6 y5 y4 y3 y2 y1 + byte 2: ? x2 x1 y12 y11 y10 y9 y8 + byte 3: 0 x23 x22 x21 x20 x19 x18 x17 + byte 4: 0 x9 x8 x7 x6 x5 x4 x3 + byte 5: 0 x16 x15 x14 x13 x12 x11 x10 diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index f2a2488f1bf3..9573d0c48c6e 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -15,6 +15,13 @@ amemthresh - INTEGER enabled and the variable is automatically set to 2, otherwise the strategy is disabled and the variable is set to 1. +backup_only - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + If set, disable the director function while the server is + in backup mode to avoid packet loops for DR/TUN methods. + conntrack - BOOLEAN 0 - disabled (default) not 0 - enabled diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt index c0aab985bad9..949d5dcdd9a3 100644 --- a/Documentation/networking/tuntap.txt +++ b/Documentation/networking/tuntap.txt @@ -105,6 +105,83 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> Proto [2 bytes] Raw protocol(IP, IPv6, etc) frame. + 3.3 Multiqueue tuntap interface: + + From version 3.8, Linux supports multiqueue tuntap which can uses multiple + file descriptors (queues) to parallelize packets sending or receiving. The + device allocation is the same as before, and if user wants to create multiple + queues, TUNSETIFF with the same device name must be called many times with + IFF_MULTI_QUEUE flag. + + char *dev should be the name of the device, queues is the number of queues to + be created, fds is used to store and return the file descriptors (queues) + created to the caller. Each file descriptor were served as the interface of a + queue which could be accessed by userspace. + + #include <linux/if.h> + #include <linux/if_tun.h> + + int tun_alloc_mq(char *dev, int queues, int *fds) + { + struct ifreq ifr; + int fd, err, i; + + if (!dev) + return -1; + + memset(&ifr, 0, sizeof(ifr)); + /* Flags: IFF_TUN - TUN device (no Ethernet headers) + * IFF_TAP - TAP device + * + * IFF_NO_PI - Do not provide packet information + * IFF_MULTI_QUEUE - Create a queue of multiqueue device + */ + ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE; + strcpy(ifr.ifr_name, dev); + + for (i = 0; i < queues; i++) { + if ((fd = open("/dev/net/tun", O_RDWR)) < 0) + goto err; + err = ioctl(fd, TUNSETIFF, (void *)&ifr); + if (err) { + close(fd); + goto err; + } + fds[i] = fd; + } + + return 0; + err: + for (--i; i >= 0; i--) + close(fds[i]); + return err; + } + + A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When + calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when + calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were + enabled by default after it was created through TUNSETIFF. + + fd is the file descriptor (queue) that we want to enable or disable, when + enable is true we enable it, otherwise we disable it + + #include <linux/if.h> + #include <linux/if_tun.h> + + int tun_set_queue(int fd, int enable) + { + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + + if (enable) + ifr.ifr_flags = IFF_ATTACH_QUEUE; + else + ifr.ifr_flags = IFF_DETACH_QUEUE; + + return ioctl(fd, TUNSETQUEUE, (void *)&ifr); + } + Universal TUN/TAP device driver Frequently Asked Question. 1. What platforms are supported by TUN/TAP driver ? diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index ce6581c8ca26..95731a08f257 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) power_save - Automatic power-saving timeout (in second, 0 = disable) - power_save_controller - Support runtime D3 of HD-audio controller - (-1 = on for supported chip (default), false = off, - true = force to on even for unsupported hardware) + power_save_controller - Reset HD-audio controller in power-saving mode + (default = on) align_buffer_size - Force rounding of buffer/period sizes to multiples of 128 bytes. This is more efficient in terms of memory access but isn't required by the HDA spec and prevents @@ -912,7 +911,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. models depending on the codec chip. The list of available models is found in HD-Audio-Models.txt - The model name "genric" is treated as a special case. When this + The model name "generic" is treated as a special case. When this model is given, the driver uses the generic codec parser without "codec-patch". It's sometimes good for testing and debugging. diff --git a/Documentation/sound/alsa/seq_oss.html b/Documentation/sound/alsa/seq_oss.html index d9776cf60c07..9663b45f6fde 100644 --- a/Documentation/sound/alsa/seq_oss.html +++ b/Documentation/sound/alsa/seq_oss.html @@ -285,7 +285,7 @@ sample data. <H4> 7.2.4 Close Callback</H4> The <TT>close</TT> callback is called when this device is closed by the -applicaion. If any private data was allocated in open callback, it must +application. If any private data was allocated in open callback, it must be released in the close callback. The deletion of ALSA port should be done here, too. This callback must not be NULL. <H4> diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 53d6a3c51d87..a372304aef10 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1873,7 +1873,7 @@ feature: status\input | 0 | 1 | else | --------------+------------+------------+------------+ - not allocated |(do nothing)| alloc+swap | EINVAL | + not allocated |(do nothing)| alloc+swap |(do nothing)| --------------+------------+------------+------------+ allocated | free | swap | clear | --------------+------------+------------+------------+ |