diff options
Diffstat (limited to 'arch/arc')
-rw-r--r-- | arch/arc/Kconfig | 3 | ||||
-rw-r--r-- | arch/arc/boot/dts/hsdk.dts | 13 | ||||
-rw-r--r-- | arch/arc/include/asm/Kbuild | 1 | ||||
-rw-r--r-- | arch/arc/include/asm/tlb.h | 32 | ||||
-rw-r--r-- | arch/arc/lib/memset-archs.S | 4 | ||||
-rw-r--r-- | arch/arc/mm/cache.c | 31 |
6 files changed, 26 insertions, 58 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index c781e45d1d99..23e063df5d2c 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -63,9 +63,6 @@ config SCHED_OMIT_FRAME_POINTER config GENERIC_CSUM def_bool y -config RWSEM_GENERIC_SPINLOCK - def_bool y - config ARCH_DISCONTIGMEM_ENABLE def_bool n diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 69bc1c9e8e50..7425bb0f2d1b 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -18,8 +18,8 @@ model = "snps,hsdk"; compatible = "snps,hsdk"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; @@ -105,7 +105,7 @@ #size-cells = <1>; interrupt-parent = <&idu_intc>; - ranges = <0x00000000 0xf0000000 0x10000000>; + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; cgu_rst: reset-controller@8a0 { compatible = "snps,hsdk-reset"; @@ -269,9 +269,10 @@ }; memory@80000000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GiB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ }; }; diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index decc306a3b52..393d4f5e1450 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -16,6 +16,7 @@ generic-y += local.h generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h +generic-y += mmiowb.h generic-y += msi.h generic-y += parport.h generic-y += percpu.h diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index a9db5f62aaf3..90cac97643a4 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -9,38 +9,6 @@ #ifndef _ASM_ARC_TLB_H #define _ASM_ARC_TLB_H -#define tlb_flush(tlb) \ -do { \ - if (tlb->fullmm) \ - flush_tlb_mm((tlb)->mm); \ -} while (0) - -/* - * This pair is called at time of munmap/exit to flush cache and TLB entries - * for mappings being torn down. - * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$ - * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range - * - * Note, read http://lkml.org/lkml/2004/1/15/6 - */ -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING -#define tlb_start_vma(tlb, vma) -#else -#define tlb_start_vma(tlb, vma) \ -do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ -} while(0) -#endif - -#define tlb_end_vma(tlb, vma) \ -do { \ - if (!tlb->fullmm) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ -} while (0) - -#define __tlb_remove_tlb_entry(tlb, ptep, address) - #include <linux/pagemap.h> #include <asm-generic/tlb.h> diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S index f230bb7092fd..b3373f5c88e0 100644 --- a/arch/arc/lib/memset-archs.S +++ b/arch/arc/lib/memset-archs.S @@ -30,10 +30,10 @@ #else -.macro PREALLOC_INSTR +.macro PREALLOC_INSTR reg, off .endm -.macro PREFETCHW_INSTR +.macro PREFETCHW_INSTR reg, off .endm #endif diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 4135abec3fb0..63e6e6504699 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -113,10 +113,24 @@ static void read_decode_cache_bcr_arcv2(int cpu) } READ_BCR(ARC_REG_CLUSTER_BCR, cbcr); - if (cbcr.c) + if (cbcr.c) { ioc_exists = 1; - else + + /* + * As for today we don't support both IOC and ZONE_HIGHMEM enabled + * simultaneously. This happens because as of today IOC aperture covers + * only ZONE_NORMAL (low mem) and any dma transactions outside this + * region won't be HW coherent. + * If we want to use both IOC and ZONE_HIGHMEM we can use + * bounce_buffer to handle dma transactions to HIGHMEM. + * Also it is possible to modify dma_direct cache ops or increase IOC + * aperture size if we are planning to use HIGHMEM without PAE. + */ + if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled()) + ioc_enable = 0; + } else { ioc_enable = 0; + } /* HS 2.0 didn't have AUX_VOL */ if (cpuinfo_arc700[cpu].core.family > 0x51) { @@ -1158,19 +1172,6 @@ noinline void __init arc_ioc_setup(void) if (!ioc_enable) return; - /* - * As for today we don't support both IOC and ZONE_HIGHMEM enabled - * simultaneously. This happens because as of today IOC aperture covers - * only ZONE_NORMAL (low mem) and any dma transactions outside this - * region won't be HW coherent. - * If we want to use both IOC and ZONE_HIGHMEM we can use - * bounce_buffer to handle dma transactions to HIGHMEM. - * Also it is possible to modify dma_direct cache ops or increase IOC - * aperture size if we are planning to use HIGHMEM without PAE. - */ - if (IS_ENABLED(CONFIG_HIGHMEM)) - panic("IOC and HIGHMEM can't be used simultaneously"); - /* Flush + invalidate + disable L1 dcache */ __dc_disable(); |