diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 164 |
1 files changed, 82 insertions, 82 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e0d236d7ff73..66ca8014ff3e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -81,47 +81,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - help - Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. - config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and cap9" + bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -136,6 +103,20 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -199,45 +180,49 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. - config DEBUG_IMX6Q_UART - bool "i.MX6Q Debug UART" + config DEBUG_IMX6Q_UART4 + bool "i.MX6Q Debug UART4" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q. + on i.MX6Q UART4. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. + their output to the second serial port on MSM devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. + their output to the serial port on MSM 8660 devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -255,42 +240,57 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. endchoice |