diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/Kconfig.debug | 80 |
1 files changed, 52 insertions, 28 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8f90595069a1..b11ad54f8d17 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -223,6 +223,14 @@ choice Say Y here if you want kernel low-level debugging support on HI3716 UART. + config DEBUG_HIX5HD2_UART + bool "Hisilicon Hix5hd2 Debug UART" + depends on ARCH_HIX5HD2 + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Hix5hd2 UART. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -582,7 +590,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART0 - bool "Kernel low-level debugging messages via Rockchip RK3X UART0" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -590,7 +598,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART1 - bool "Kernel low-level debugging messages via Rockchip RK3X UART1" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -598,7 +606,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART2 - bool "Kernel low-level debugging messages via Rockchip RK3X UART2" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -606,64 +614,64 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART3 - bool "Kernel low-level debugging messages via Rockchip RK3X UART3" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. + config DEBUG_RK32_UART2 + bool "Kernel low-level debugging messages via Rockchip RK32 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK32xx based platforms. + config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 0 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 0. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 1 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 1. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 2 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 2. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART3 - depends on PLAT_SAMSUNG && ARCH_EXYNOS - select DEBUG_EXYNOS_UART - bool "Use S3C UART 3 for low-level debug" + depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) + select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 3. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C2410_UART0 depends on ARCH_S3C24XX select DEBUG_S3C2410_UART @@ -715,6 +723,14 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. + config DEBUG_SUNXI_R_UART + bool "Kernel low-level debugging messages via sunXi R_UART" + depends on MACH_SUN6I || MACH_SUN8I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A31/A23 based platforms on the R_UART. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -949,6 +965,9 @@ config DEBUG_S3C2410_UART config DEBUG_S3C24XX_UART bool +config DEBUG_S5PV210_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -991,6 +1010,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1009,6 +1029,7 @@ config DEBUG_LL_INCLUDE default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART + default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1033,7 +1054,7 @@ config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ + ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC config DEBUG_UART_PHYS @@ -1043,6 +1064,7 @@ config DEBUG_UART_PHYS default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0x01f02800 if DEBUG_SUNXI_R_UART default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC @@ -1089,13 +1111,14 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART - default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X + default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART @@ -1118,6 +1141,7 @@ config DEBUG_UART_VIRT default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 + default 0xf1f02800 if DEBUG_SUNXI_R_UART default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI @@ -1144,7 +1168,7 @@ config DEBUG_UART_VIRT default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X - default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART + default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 @@ -1152,9 +1176,9 @@ config DEBUG_UART_VIRT default 0xfec02000 if DEBUG_SOCFPGA_UART default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 - default 0xfed12000 if ARCH_KIRKWOOD default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 @@ -1186,7 +1210,7 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" |