1 files changed, 19 insertions, 29 deletions

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 25222497f828..036f3831dc26 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM437x SK EVM */
@@ -134,22 +134,6 @@
 
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <2>;
-			hback-porch = <2>;
-			hsync-len = <41>;
-			vfront-porch = <2>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
@@ -719,7 +703,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -762,7 +746,7 @@
 	pinctrl-0 = <&qspi_pins>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -808,19 +792,17 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
@@ -831,16 +813,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
 };
 
 &elm {
@@ -910,3 +892,11 @@
 		};
 	};
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};