aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/artpec6.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/artpec6.dtsi')
-rw-r--r--arch/arm/boot/dts/artpec6.dtsi163
1 files changed, 153 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 2ed11773048d..3e4115c2cd75 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -41,6 +41,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/dma/nbpfaxi.h>
#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
#include "skeleton.dtsi"
@@ -98,7 +99,7 @@
clock-frequency = <125000000>;
};
- clkctrl: clkctrl@0xf8000000 {
+ clkctrl: clkctrl@f8000000 {
#clock-cells = <1>;
compatible = "axis,artpec6-clkctrl";
reg = <0xf8000000 0x48>;
@@ -153,6 +154,10 @@
interrupt-affinity = <&cpu0>, <&cpu1>;
};
+ /*
+ * Both pci nodes cannot be enabled at the same time,
+ * leave the unwanted node as disabled.
+ */
pcie: pcie@f8050000 {
compatible = "axis,artpec6-pcie", "snps,dw-pcie";
reg = <0xf8050000 0x2000
@@ -180,28 +185,146 @@
status = "disabled";
};
+ pcie_ep: pcie_ep@f8050000 {
+ compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
+ reg = <0xf8050000 0x2000
+ 0xf8051000 0x2000
+ 0xf8040000 0x1000
+ 0xc0000000 0x20000000>;
+ reg-names = "dbi", "dbi2", "phy", "addr_space";
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ num-lanes = <2>;
+ axis,syscon-pcie = <&syscon>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@f801d000 {
+ compatible = "axis,artpec6-pinctrl";
+ reg = <0xf801d000 0x400>;
+
+ pinctrl_uart0: uart0grp {
+ function = "uart0";
+ groups = "uart0grp2";
+ bias-pull-up;
+ };
+ pinctrl_uart1: uart1grp {
+ function = "uart1";
+ groups = "uart1grp0";
+ bias-pull-up;
+ };
+ pinctrl_uart2: uart2grp {
+ function = "uart2";
+ groups = "uart2grp1";
+ bias-pull-up;
+ };
+ pinctrl_uart3: uart3grp {
+ function = "uart3";
+ groups = "uart3grp0";
+ bias-pull-up;
+ };
+ };
+
amba@0 {
compatible = "simple-bus";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
- dma-ranges = <0x80000000 0x00000000 0x40000000>;
- dma-coherent;
+ dma-ranges;
+
+ crypto@f4264000 {
+ compatible = "axis,artpec6-crypto";
+ reg = <0xf4264000 0x4000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma0: dma@f8019000 {
+ compatible = "renesas,nbpfaxi64dmac8b16";
+ reg = <0xf8019000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch12",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
+ dma1: dma@f8019400 {
+ compatible = "renesas,nbpfaxi64dmac8b16";
+ reg = <0xf8019400 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch12",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
ethernet: ethernet@f8010000 {
- clock-names = "phy_ref_clk", "apb_pclk";
- clocks = <&eth_phy_ref_clk>,
- <&clkctrl ARTPEC6_CLK_ETH_ACLK>;
- compatible = "snps,dwc-qos-ethernet-4.10";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "stmmaceth", "ptp_ref";
+ clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
+ <&clkctrl ARTPEC6_CLK_PTP_REF>;
+ compatible = "snps,dwmac-4.10a", "snps,dwmac";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
reg = <0xf8010000 0x4000>;
- snps,write-requests = <2>;
- snps,read-requests = <16>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
snps,txpbl = <8>;
snps,rxpbl = <2>;
+ snps,aal;
+ snps,tso;
status = "disabled";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <1>;
+ snps,rd_osr_lmt = <15>;
+ /* If FB is disabled, the AXI master chooses
+ * a burst length of any value less than the
+ * maximum enabled burst length
+ * (all lesser burst length enables are redundant).
+ */
+ snps,blen = <0 0 0 0 16 0 0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
};
uart0: serial@f8036000 {
@@ -211,6 +334,11 @@
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+ <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@f8037000 {
@@ -220,6 +348,11 @@
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+ <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@f8038000 {
@@ -229,6 +362,11 @@
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+ <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@f8039000 {
@@ -238,6 +376,11 @@
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+ <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.