diff options
Diffstat (limited to 'arch/arm/boot/dts/bcm2711-rpi-4-b.dts')
-rw-r--r-- | arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 49 |
1 files changed, 15 insertions, 34 deletions
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index f24bdd0870a5..631dd5baf68d 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -3,6 +3,7 @@ #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -26,11 +27,6 @@ }; }; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - sd_io_1v8_reg: sd_io_1v8_reg { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; @@ -40,8 +36,8 @@ regulator-always-on; regulator-settling-time-us = <5000>; gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; status = "okay"; }; @@ -56,6 +52,10 @@ }; }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + &ddc0 { status = "okay"; }; @@ -178,23 +178,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; @@ -217,15 +200,16 @@ }; &pcie0 { - pci@1,0 { + pci@0,0 { + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges; reg = <0 0 0 0 0>; - usb@1,0 { - reg = <0x10000 0 0 0 0>; + usb@0,0 { + reg = <0 0 0 0 0>; resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; }; }; @@ -236,13 +220,6 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -259,3 +236,7 @@ &vec { status = "disabled"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; |