diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm/boot/dts/bcm5301x.dtsi | 163 |
1 files changed, 98 insertions, 65 deletions
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 2d9b4dd05830..5fc1b847f4aa 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA@18000000 { + chipcommon-a-bus@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -148,15 +148,6 @@ }; }; - usb2_phy: usb2-phy@1800c000 { - compatible = "brcm,ns-usb2-phy"; - reg = <0x1800c000 0x1000>; - reg-names = "dmu"; - #phy-cells = <0>; - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; - clock-names = "phy-ref-clk"; - }; - axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -242,6 +233,8 @@ gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; pcie0: pcie@12000 { @@ -252,6 +245,10 @@ reg = <0x00013000 0x1000>; }; + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; @@ -261,7 +258,7 @@ interrupt-parent = <&gic>; - ehci: ehci@21000 { + ehci: usb@21000 { #usb-cells = <0>; compatible = "generic-ehci"; @@ -283,7 +280,7 @@ }; }; - ohci: ohci@22000 { + ohci: usb@22000 { #usb-cells = <0>; compatible = "generic-ohci"; @@ -314,7 +311,7 @@ interrupt-parent = <&gic>; - xhci: xhci@23000 { + xhci: usb@23000 { #usb-cells = <0>; compatible = "generic-xhci"; @@ -350,6 +347,14 @@ }; }; + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; @@ -357,8 +362,8 @@ #address-cells = <1>; }; - mdio-bus-mux@18003000 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio>; #address-cells = <1>; #size-cells = <0>; @@ -384,30 +389,73 @@ reg = <0x18105000 0x1000>; }; + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; status = "disabled"; }; - dmu@1800c000 { + dmu-bus@1800c000 { compatible = "simple-bus"; ranges = <0 0x1800c000 0x1000>; #address-cells = <1>; #size-cells = <1>; - cru@100 { - compatible = "simple-bus"; + cru-bus@100 { + compatible = "brcm,ns-cru", "simple-mfd"; reg = <0x100 0x1a4>; ranges; #address-cells = <1>; #size-cells = <1>; - pin-controller@1c0 { + lcpll0: clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", + "sdio", "ddr_phy"; + }; + + genpll: clock-controller@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", + "ethernetclk", + "usbclk", "iprocfast", + "sata1", "sata2"; + }; + + usb2_phy: phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&cru_clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + cru_clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + + pinctrl: pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; @@ -417,57 +465,42 @@ function = "spi"; }; - i2c { + pinmux_i2c: i2c-pins { groups = "i2c_grp"; function = "i2c"; }; - pwm { + pinmux_pwm: pwm-pins { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; }; - pinmux_uart1: uart1 { + pinmux_uart1: uart1-pins { groups = "uart1_grp"; function = "uart1"; }; }; - }; - }; - - lcpll0: lcpll0@1800c100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; - reg = <0x1800c100 0x14>; - clocks = <&osc>; - clock-output-names = "lcpll0", "pcie_phy", "sdio", - "ddr_phy"; - }; - genpll: genpll@1800c140 { - #clock-cells = <1>; - compatible = "brcm,nsp-genpll"; - reg = <0x1800c140 0x24>; - clocks = <&osc>; - clock-output-names = "genpll", "phy", "ethernetclk", - "usbclk", "iprocfast", "sata1", - "sata2"; - }; - - thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; + thermal: thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; }; - srab: srab@18007000 { - compatible = "brcm,bcm5301x-srab"; + srab: ethernet-switch@18007000 { + compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; rng: rng@18004000 { @@ -475,7 +508,7 @@ reg = <0x18004000 0x14>; }; - nand: nand@18028000 { + nand_controller: nand-controller@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; reg-names = "nand", "iproc-idm", "iproc-ext"; @@ -488,33 +521,33 @@ }; spi@18029200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x18029200 0x184>, <0x18029000 0x124>, <0x1811b408 0x004>, <0x180293a0 0x01c>; reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_lr_fullness_reached", + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", "spi_lr_session_aborted", "spi_lr_impatient", "spi_lr_session_done", - "spi_lr_overhead", - "mspi_done", - "mspi_halted"; + "spi_lr_overread"; clocks = <&iprocmed>; clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; - spi_nor: spi-nor@0 { + spi_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; @@ -535,9 +568,9 @@ trips { cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; + temperature = <125000>; + hysteresis = <0>; + type = "critical"; }; }; |