diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 69 |
1 files changed, 55 insertions, 14 deletions
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 31719c079d67..94122e9c6625 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "exynos4412-midas.dtsi" / { @@ -15,7 +16,7 @@ i2c10 = &i2c_cm36651; }; - aat1290 { + led-controller { compatible = "skyworks,aat1290"; flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; @@ -25,15 +26,16 @@ pinctrl-1 = <&camera_flash_host>; pinctrl-2 = <&camera_flash_isp>; - flash-led { - label = "flash"; + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; led-max-microamp = <520833>; flash-max-microamp = <1012500>; flash-max-timeout-us = <1940000>; }; }; - lcd_vdd3_reg: voltage-regulator-6 { + lcd_vdd3_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +44,7 @@ enable-active-high; }; - ps_als_reg: voltage-regulator-7 { + ps_als_reg: voltage-regulator-11 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; @@ -53,13 +55,13 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -68,12 +70,13 @@ i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - cm36651@18 { + light-sensor@18 { compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; @@ -106,7 +109,7 @@ vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; @@ -131,7 +134,7 @@ }; &i2c_3 { - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; @@ -150,13 +153,13 @@ }; &pinctrl_0 { - camera_flash_host: camera-flash-host { + camera_flash_host: camera-flash-host-pins { samsung,pins = "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-val = <0>; }; - camera_flash_isp: camera-flash-isp { + camera_flash_isp: camera-flash-isp-pins { samsung,pins = "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-val = <1>; @@ -169,6 +172,44 @@ status = "okay"; }; +&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS1", + "IN1LN", "MICBIAS1", + "Main Mic", "MICBIAS1", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + &touchkey_reg { gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; status = "okay"; |