diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm/boot/dts/exynos4412-midas.dtsi | 216 |
1 files changed, 147 insertions, 69 deletions
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 3023bc3b68ce..8e1c19a8ad06 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -12,11 +12,12 @@ /dts-v1/; #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" / { compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; @@ -37,12 +38,12 @@ fixed-rate-clocks { xxti { - compatible = "samsung,clock-xxti", "fixed-clock"; + compatible = "samsung,clock-xxti"; clock-frequency = <0>; }; xusbxti { - compatible = "samsung,clock-xusbxti", "fixed-clock"; + compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; }; @@ -102,6 +103,30 @@ status = "disabled"; }; + vbatt_reg: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VBATT"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + mic_bias_reg: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + submic_bias_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "SUB_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -140,16 +165,16 @@ i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693@66 { + pmic@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_irq>; reg = <0x66>; @@ -168,7 +193,7 @@ }; }; - max77693_haptic { + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; @@ -188,16 +213,16 @@ i2c_max77693_fuel: i2c-gpio-3 { compatible = "i2c-gpio"; - gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693-fuel-gauge@36 { + fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_fuel_irq>; reg = <0x36>; @@ -228,14 +253,14 @@ i2c-mhl { compatible = "i2c-gpio"; - gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&i2c_mhl_bus>; pinctrl-names = "default"; - status = "okay"; sii9234: hdmi-bridge@39 { compatible = "sil,sii9234"; @@ -263,16 +288,18 @@ clock-names = "ext_clock"; }; - sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; + sound: sound { + compatible = "samsung,midas-audio"; + model = "Midas"; + mic-bias-supply = <&mic_bias_reg>; + submic-bias-supply = <&submic_bias_reg>; + + cpu { + sound-dai = <&i2s0 0>; + }; + codec { + sound-dai = <&wm1811>; + }; }; thermistor-ap { @@ -290,25 +317,6 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; }; &adc { @@ -377,6 +385,21 @@ cpu0-supply = <&buck2_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; @@ -525,7 +548,7 @@ pinctrl-names = "default"; status = "okay"; - s5c73m3: s5c73m3@3c { + s5c73m3: image-sensor@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ @@ -552,7 +575,7 @@ pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; - s5k6a3@10 { + image-sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; @@ -563,7 +586,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { @@ -591,14 +614,40 @@ pinctrl-names = "default"; status = "okay"; - wm1811: wm1811@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; + clocks = <&pmu_system_controller 0>, + <&max77686 MAX77686_CLK_PMIC>; + clock-names = "MCLK1", "MCLK2"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpx3>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + #sound-dai-cells = <0>; + + wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 + 0x0 0x8000 0x0 0x0 0x0>; + wlf,micbias-cfg = <0x2f 0x2b>; + + wlf,lineout1-feedback; + wlf,lineout1-se; + wlf,lineout2-se; + wlf,ldoena-always-driven; + + AVDD2-supply = <&vbatt_reg>; DBVDD1-supply = <&ldo3_reg>; + DBVDD2-supply = <&vbatt_reg>; + DBVDD3-supply = <&vbatt_reg>; + DCVDD-supply = <&ldo3_reg>; + CPVDD-supply = <&vbatt_reg>; + SPKVDD1-supply = <&vbatt_reg>; + SPKVDD2-supply = <&vbatt_reg>; wlf,ldo1ena = <&gpj0 4 0>; + wlf,ldo2ena = <&gpj0 4 0>; }; }; @@ -614,12 +663,13 @@ pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; + wakeup-source; reg = <0x09>; #clock-cells = <1>; @@ -820,7 +870,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -831,7 +881,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -842,7 +892,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; @@ -853,7 +903,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -938,19 +988,19 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep0>; - mhl_int: mhl-int { + mhl_int: mhl-int-pins { samsung,pins = "gpf3-5"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - i2c_mhl_bus: i2c-mhl-bus { + i2c_mhl_bus: i2c-mhl-bus-pins { samsung,pins = "gpf0-4", "gpf0-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - sleep0: sleep-states { + sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); PIN_SLP(gpa0-2, INPUT, NONE); @@ -1053,37 +1103,52 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; - gpio_keys: gpio-keys { + gpio_keys: gpio-keys-pins { samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - max77686_irq: max77686-irq { + bt_shutdown: bt-shutdown-pins { + samsung,pins = "gpl0-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup-pins { + samsung,pins = "gpx2-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup-pins { + samsung,pins = "gpx3-1"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77686_irq: max77686-irq-pins { samsung,pins = "gpx0-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - max77693_irq: max77693-irq { + max77693_irq: max77693-irq-pins { samsung,pins = "gpx1-5"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - max77693_fuel_irq: max77693-fuel-irq { + max77693_fuel_irq: max77693-fuel-irq-pins { samsung,pins = "gpx2-3"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - sdhci2_cd: sdhci2-cd-irq { + sdhci2_cd: sdhci2-cd-irq-pins { samsung,pins = "gpx3-4"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - hdmi_hpd: hdmi-hpd { + hdmi_hpd: hdmi-hpd-pins { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; - sleep1: sleep-states { + sleep1: sleep-state { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); PIN_SLP(gpk0-2, OUT0, NONE); @@ -1236,7 +1301,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep2>; - sleep2: sleep-states { + sleep2: sleep-state { PIN_SLP(gpz-0, INPUT, DOWN); PIN_SLP(gpz-1, INPUT, DOWN); PIN_SLP(gpz-2, INPUT, DOWN); @@ -1251,7 +1316,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep3>; - sleep3: sleep-states { + sleep3: sleep-state { PIN_SLP(gpv0-0, INPUT, DOWN); PIN_SLP(gpv0-1, INPUT, DOWN); PIN_SLP(gpv0-2, INPUT, DOWN); @@ -1335,7 +1400,20 @@ }; &serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + max-speed = <3000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + }; }; &serial_1 { @@ -1356,7 +1434,7 @@ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3@0 { + s5c73m3_spi: image-sensor@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; |