diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm/boot/dts/exynos5250-arndale.dts | 144 |
1 files changed, 68 insertions, 76 deletions
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index f8ebc620f42d..71c0e87d3a1d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -27,45 +27,45 @@ stdout-path = "serial2:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - menu { + key-menu { label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; wakeup-source; }; - home { + key-home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; wakeup-source; }; - up { + key-up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; wakeup-source; }; - down { + key-down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; wakeup-source; }; - back { + key-back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; wakeup-source; }; - wakeup { + key-wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; @@ -84,56 +84,48 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - main_dc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "MAIN_DC"; - }; + main_dc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + regulator-always-on; + }; - mmc_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + mmc_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_MMC"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; - reg_hdmi_en: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdmi-en"; - }; + reg_hdmi_en: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + regulator-always-on; + }; - vcc_1v2_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; + vcc_1v2_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - vcc_1v8_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + vcc_1v8_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - vcc_3v3_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vcc_3v3_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -219,13 +211,14 @@ samsung,i2c-max-bus-freq = <20000>; samsung,i2c-slave-addr = <0x66>; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s5m8767_irq>; + wakeup-source; vinb1-supply = <&main_dc_reg>; vinb2-supply = <&main_dc_reg>; @@ -247,15 +240,12 @@ vinl8-supply = <&buck8_reg>; vinl9-supply = <&buck8_reg>; - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, - <&gpd1 1 GPIO_ACTIVE_HIGH>, - <&gpd1 2 GPIO_ACTIVE_HIGH>; + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, - <&gpx2 4 GPIO_ACTIVE_HIGH>, - <&gpx2 5 GPIO_ACTIVE_HIGH>; + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; @@ -450,7 +440,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -459,7 +449,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <912500>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -468,7 +458,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -477,7 +467,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -519,7 +509,7 @@ &i2c_3 { status = "okay"; - wm1811: codec@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&i2s0 CLK_I2S_CDCLK>; @@ -550,12 +540,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; }; &i2s0 { @@ -606,7 +590,7 @@ }; &pinctrl_0 { - s5m8767_irq: s5m8767-irq { + s5m8767_irq: s5m8767-irq-pins { samsung,pins = "gpx3-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; @@ -627,21 +611,29 @@ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; +&sata_phy_i2c { + status = "okay"; +}; + &soc { /* * For unknown reasons HDMI-DDC does not work with Exynos I2C * controllers. Lets use software I2C over GPIO pins as a workaround. */ - i2c_ddc: i2c-gpio { + i2c_ddc: i2c-10 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_gpio_bus>; status = "okay"; compatible = "i2c-gpio"; - gpios = <&gpa0 6 0 /* sda */ - &gpa0 7 0 /* scl */ - >; + sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; }; }; + +&usbdrd { + vdd10-supply = <&ldo15_reg>; + vdd33-supply = <&ldo12_reg>; +}; |