diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-yapp4-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 58 |
1 files changed, 44 insertions, 14 deletions
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 80ed5f16a76e..52162e8c7274 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -5,9 +5,17 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> / { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; @@ -47,6 +55,7 @@ panel: panel { compatible = "dataimage,scf0700c48ggu18"; power-supply = <&sw2_reg>; + backlight = <&backlight>; status = "disabled"; port { @@ -100,9 +109,13 @@ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-reset-duration = <20>; phy-supply = <&sw2_reg>; - phy-handle = <ðphy0>; status = "okay"; + fixed-link { + speed = <1000>; + full-duplex; + }; + mdio { #address-cells = <1>; #size-cells = <0>; @@ -135,13 +148,13 @@ }; }; - port@2 { + eth2: port@2 { reg = <2>; label = "eth2"; phy-handle = <&phy_port2>; }; - port@3 { + eth1: port@3 { reg = <3>; label = "eth1"; phy-handle = <&phy_port3>; @@ -258,29 +271,31 @@ reg = <0x30>; clock-mode = /bits/ 8 <1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - chan0 { + chan@0 { chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; }; - chan1 { + chan@1 { chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; }; - chan2 { + chan@2 { chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "W"; - led-cur = /bits/ 8 <0x0>; - max-cur = /bits/ 8 <0x0>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; }; }; @@ -311,12 +326,26 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - oled: oled@3d { + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { compatible = "solomon,ssd1305fb-i2c"; reg = <0x3d>; solomon,height = <64>; solomon,width = <128>; solomon,page-offset = <0>; + solomon,col-offset = <4>; solomon,prechargep2 = <15>; reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; vbat-supply = <&sw2_reg>; @@ -540,7 +569,6 @@ }; &pwm1 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "disabled"; @@ -562,6 +590,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; status = "disabled"; }; @@ -569,6 +598,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; srp-disable; hnp-disable; adp-disable; |