diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts')
| -rw-r--r-- | arch/arm/boot/dts/meson8b-odroidc1.dts | 87 |
1 files changed, 39 insertions, 48 deletions
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index f3ad9397f670..a24eccc354b9 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -194,6 +154,23 @@ vin-supply = <&p5v0>; }; + vddee: regulator-vddee { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 1 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + vdd_rtc: regulator-vdd-rtc { /* * Torex Semiconductor XC6215 configured for a fixed output of @@ -213,13 +190,15 @@ cpu-supply = <&vcck>; }; +&efuse { + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; +}; + ðmac { status = "okay"; - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; @@ -227,6 +206,9 @@ phy-handle = <ð_phy>; amlogic,tx-delay-ns = <4>; + nvmem-cells = <ðernet_mac_address>; + nvmem-cell-names = "mac-address"; + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -235,6 +217,11 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; @@ -315,6 +302,10 @@ pinctrl-names = "default"; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -347,10 +338,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>; + clock-names = "clkin0", "clkin1"; }; &rtc { |