diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8064.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064.dtsi | 78 |
1 files changed, 35 insertions, 43 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 0b2bed6e7adf..4d562c94c31c 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -95,13 +95,13 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0>; }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -143,7 +143,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -164,7 +164,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -198,7 +198,7 @@ clock-frequency = <19200000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -683,12 +683,11 @@ pm8821_mpps: mpps@50 { compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; reg = <0x50>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; }; }; }; @@ -726,19 +725,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; rtc@11d { @@ -1084,7 +1073,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; @@ -1104,7 +1093,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1122,7 +1111,7 @@ dma-names = "tx", "rx"; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1148,22 +1137,21 @@ }; gpu: adreno-3xx@4300000 { - compatible = "qcom,adreno-3xx"; + compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "kgsl_3d0_irq"; clock-names = - "core_clk", - "iface_clk", - "mem_clk", - "mem_iface_clk"; + "core", + "iface", + "mem", + "mem_iface"; clocks = <&mmcc GFX3D_CLK>, <&mmcc GFX3D_AHB_CLK>, <&mmcc GFX3D_AXI_CLK>, <&mmcc MMSS_IMEM_AHB_CLK>; - qcom,chipid = <0x03020002>; iommus = <&gfx3d 0 &gfx3d 1 @@ -1230,13 +1218,17 @@ &gfx3d1 30 &gfx3d1 31>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <450000000>; }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; }; }; }; @@ -1306,7 +1298,7 @@ reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; clock-names = "iface_clk", "ref"; clocks = <&mmcc DSI_M_AHB_CLK>, - <&cxo_board>; + <&pxo_board>; }; @@ -1420,9 +1412,9 @@ clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, <&mmcc HDMI_S_AHB_CLK>; - clock-names = "core_clk", - "master_iface_clk", - "slave_iface_clk"; + clock-names = "core", + "master_iface", + "slave_iface"; phys = <&hdmi_phy>; phy-names = "hdmi-phy"; @@ -1453,7 +1445,7 @@ "hdmi_pll"; clocks = <&mmcc HDMI_S_AHB_CLK>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; #phy-cells = <0>; }; |