diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/qcom-mdm9615.dtsi | 33 |
1 files changed, 16 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 356e9535f7a6..b47c86412de2 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -98,7 +98,7 @@ ranges; compatible = "simple-bus"; - L2: l2-cache@2040000 { + L2: cache-controller@2040000 { compatible = "arm,pl310-cache"; reg = <0x02040000 0x1000>; arm,data-latency = <2 2 0>; @@ -128,6 +128,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,mdm9615-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; #gpio-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; @@ -138,6 +139,7 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-mdm9615"; #clock-cells = <1>; + #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; }; @@ -150,7 +152,7 @@ }; l2cc: clock-controller@2011000 { - compatible = "syscon"; + compatible = "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; @@ -299,18 +301,14 @@ pull-up; }; - pmicmpp: mpp@50 { + pmicmpp: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmicmpp 0 0 6>; }; rtc@11d { @@ -323,6 +321,7 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; @@ -332,7 +331,7 @@ }; }; - sdcc1bam: dma@12182000{ + sdcc1bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -342,7 +341,7 @@ qcom,ee = <0>; }; - sdcc2bam: dma@12142000{ + sdcc2bam: dma-controller@12142000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -357,13 +356,13 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12180000 { + sdcc1: mmc@12180000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -377,13 +376,13 @@ assigned-clock-rates = <400000>; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; reg = <0x12140000 0x2000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; @@ -413,7 +412,7 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ack", "err", "wakeup"; + interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8018-regulators"; |