diff options
Diffstat (limited to 'arch/arm/boot/dts/rk3188-bqedison2qc.dts')
-rw-r--r-- | arch/arm/boot/dts/rk3188-bqedison2qc.dts | 42 |
1 files changed, 27 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index ad1afd403052..9312be362a7a 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -7,12 +7,19 @@ /dts-v1/; #include <dt-bindings/i2c/i2c.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "rk3188.dtsi" / { model = "BQ Edison2 Quad-Core"; compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; @@ -30,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key &usb_int>; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; @@ -39,7 +46,7 @@ wakeup-source; }; - wake_on_usb: wake-on-usb { + wake_on_usb: key-wake-on-usb { label = "Wake-on-USB"; gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; @@ -58,20 +65,25 @@ lvds-encoder { compatible = "ti,sn75lvds83", "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - lvds_in_vop0: endpoint { - remote-endpoint = <&vop0_out_lvds>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; }; - }; - port@1 { - reg = <1>; - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; }; }; }; @@ -465,7 +477,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; - vmmcq-supply = <&vccio_wl>; + vqmmc-supply = <&vccio_wl>; #address-cells = <1>; #size-cells = <0>; status = "okay"; @@ -474,7 +486,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; - interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PD2 IRQ_TYPE_NONE>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; |