diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm/boot/dts/sama5d2.dtsi | 48 |
1 files changed, 27 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 09c741e8ecb8..14c35c12a115 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { @@ -99,6 +100,16 @@ ranges = <0 0x00200000 0x20000>; }; + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -306,7 +317,7 @@ status = "disabled"; }; - sha@f0028000 { + sha: crypto@f0028000 { compatible = "atmel,at91sam9g46-sha"; reg = <0xf0028000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; @@ -316,10 +327,9 @@ dma-names = "tx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "sha_clk"; - status = "okay"; }; - aes@f002c000 { + aes: crypto@f002c000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf002c000 0x100>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; @@ -332,7 +342,6 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "aes_clk"; - status = "okay"; }; spi0: spi@f8000000 { @@ -376,8 +385,6 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ - #address-cells = <1>; - #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -415,7 +422,7 @@ pmecc: ecc-engine@f8014070 { compatible = "atmel,sama5d2-pmecc"; reg = <0xf8014070 0x490>, - <0xf8014500 0x100>; + <0xf8014500 0x200>; }; }; @@ -435,6 +442,7 @@ uart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -451,6 +459,7 @@ uart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -467,6 +476,7 @@ uart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -524,6 +534,7 @@ uart5: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "usart"; @@ -594,6 +605,7 @@ uart6: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "usart"; @@ -662,7 +674,7 @@ ranges = <0 0xf8044000 0x1420>; }; - reset_controller: rstc@f8048000 { + reset_controller: reset-controller@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; clocks = <&clk32k>; @@ -763,6 +775,7 @@ uart3: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -779,6 +792,7 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>, @@ -804,6 +818,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "usart"; @@ -874,6 +889,7 @@ uart8: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usart"; @@ -945,6 +961,7 @@ uart9: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; @@ -1052,16 +1069,6 @@ status = "disabled"; }; - resistive_touch: resistive-touch { - compatible = "resistive-adc-touch"; - io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; - io-channel-names = "x", "y", "pressure"; - touchscreen-min-pressure = <50000>; - status = "disabled"; - }; - pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; @@ -1084,7 +1091,7 @@ #gpio-cells = <2>; }; - tdes@fc044000 { + tdes: crypto@fc044000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc044000 0x100>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1097,7 +1104,6 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "tdes_clk"; - status = "okay"; }; classd: classd@fc048000 { @@ -1127,7 +1133,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; clock-names = "pclk", "gclk"; assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; - assigned-parrents = <&pmc PMC_TYPE_GCK 55>; + assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>; status = "disabled"; }; |