aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-golden.dts294
1 files changed, 286 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 313f0ab16866..9604695edf53 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -5,6 +5,7 @@
#include "ste-ab8505.dtsi"
#include "ste-dbx5x0-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -24,9 +25,85 @@
stdout-path = &serial2;
};
+ battery: battery {
+ compatible = "samsung,eb-l1m7flu";
+ };
+
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+
+ trips {
+ battery-crit-hi {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "coreriver,tc360-touchkey";
+ reg = <0x20>;
+ vdd-supply = <&ab8500_ldo_aux4_reg>;
+ vcc-supply = <&ab8500_ldo_aux6_reg>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_default>;
+ linux,keycodes = <KEY_MENU KEY_BACK>;
+ };
+ };
+
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_1_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "alps,hscdtd008a";
+ reg = <0x0c>;
+
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+ dvdd-supply = <&ab8500_ldo_aux8_reg>;
+ };
+ };
+
soc {
/* External Micro SD card slot */
- sdi0_per1@80126000 {
+ mmc@80126000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -54,7 +131,7 @@
};
/* WLAN SDIO */
- sdi1_per2@80118000 {
+ mmc@80118000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -74,7 +151,7 @@
#size-cells = <0>;
wifi@1 {
- compatible = "brcm,bcm4329-fmac";
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
reg = <1>;
/* GPIO216 (WLAN_HOST_WAKE) */
@@ -88,7 +165,7 @@
};
/* eMMC */
- sdi2_per3@80005000 {
+ mmc@80005000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -98,6 +175,8 @@
non-removable;
cap-mmc-highspeed;
mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
vmmc-supply = <&vmem_3v3>;
@@ -115,6 +194,7 @@
pinctrl-1 = <&u0_a_1_sleep>;
bluetooth {
+ /* BCM4334B0 actually */
compatible = "brcm,bcm4330-bt";
/* GPIO222 (BT_VREG_ON) */
shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
@@ -146,6 +226,32 @@
pinctrl-1 = <&u2rxtx_c_1_sleep>;
};
+ i2c@80004000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ proximity@44 {
+ compatible = "sharp,gp2ap002s00f";
+ reg = <0x44>;
+
+ /* GPIO146 (PS_INT) */
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vio-supply = <&ab8500_ldo_aux8_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&proximity_default>;
+
+ sharp,proximity-far-hysteresis = <0x40>;
+ sharp,proximity-close-hysteresis = <0x0f>;
+ };
+ };
+
i2c@80128000 {
status = "okay";
@@ -188,6 +294,11 @@
interrupt-parent = <&gpio6>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ /* VDDA is "analog supply", 2.57-3.47 V */
+ vdda-supply = <&ab8500_ldo_aux2_reg>;
+ /* VDD is "digital supply" 1.71-3.47V */
+ vdd-supply = <&ab8500_ldo_aux5_reg>;
+
pinctrl-names = "default";
pinctrl-0 = <&tsp_default>;
};
@@ -195,13 +306,17 @@
prcmu@80157000 {
ab8505 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8505-regulators {
+ ab8500_fg {
+ line-impedance-micro-ohms = <36000>;
+ };
+
+ regulator {
ab8500_ldo_aux1 {
regulator-name = "sensor_3v";
regulator-min-microvolt = <3000000>;
@@ -212,7 +327,6 @@
regulator-name = "vreg_tsp_a3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on; /* FIXME */
};
ab8500_ldo_aux3 {
@@ -229,7 +343,6 @@
regulator-name = "vreg_tsp_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on; /* FIXME */
};
ab8500_ldo_aux6 {
@@ -244,6 +357,29 @@
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_default_mode>;
+
+ dsi@a0351000 {
+ panel@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ max-brightness = <15>;
+ vdd3-supply = <&panel_reg_3v0>;
+ vci-supply = <&panel_reg_1v8>;
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ /* ESD (electrostatic discharge) detection interrupt */
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "esd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_default_mode>;
+ };
+ };
+ };
};
gpio-keys {
@@ -276,6 +412,32 @@
};
};
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
/* GPIO195 (MOT_EN) */
@@ -343,6 +505,40 @@
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default>;
};
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_1v8: regulator-panel-1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_3v0: regulator-panel-3v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
};
&pinctrl {
@@ -357,6 +553,44 @@
};
};
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ golden_cfg1 {
+ pins = "GPIO77", /* TOUCHKEY_SCL */
+ "GPIO78"; /* TOUCHKEY_SDA */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ flash {
+ gpio_flash_default_mode: flash_default {
+ golden_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ i2c-gpio-1 {
+ i2c_gpio_1_default: i2c_gpio_1 {
+ golden_cfg1 {
+ pins = "GPIO151", /* COMP_SCL */
+ "GPIO152"; /* COMP_SDA */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ touchkey {
+ touchkey_default: touchkey_default {
+ golden_cfg1 {
+ pins = "GPIO79"; /* TOUCHKEY_INT */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
sdi0 {
sd_level_translator_default: sd_level_translator_default {
golden_cfg1 {
@@ -375,6 +609,50 @@
};
};
+ mcde {
+ dsi_default_mode: dsi_default {
+ default_mux1 {
+ /* Mux in VSI0 used for DSI TE */
+ function = "lcd";
+ groups =
+ "lcdvsi0_a_1"; /* VSI0 for LCD */
+ };
+ default_cfg1 {
+ pins =
+ "GPIO68_E1"; /* VSI0 */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ display {
+ display_default_mode: display_default {
+ golden_cfg1 {
+ pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */
+ ste,config = <&gpio_out_lo>;
+ };
+ golden_cfg2 {
+ pins = "GPIO82_C1"; /* LDI_ESD_DET */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ panel_reg_default_mode: panel_reg_default {
+ golden_cfg1 {
+ pins = "GPIO219_AG10"; /* LCD_PWR_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ proximity {
+ proximity_default: proximity_default {
+ golden_cfg1 {
+ pins = "GPIO146_D13"; /* PS_INT */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
imu {
imu_default: imu_default {
golden_cfg1 {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.