diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 6885948f3024..90933077d66d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -126,6 +126,22 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_c>; + pinctrl-1 = <&dcmi_sleep_pins_c>; + status = "disabled"; + + port { + dcmi_0: endpoint { + remote-endpoint = <&stmipi_2>; + bus-type = <5>; + bus-width = <8>; + pclk-sample = <0>; + }; + }; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_c>; @@ -141,6 +157,7 @@ compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; + reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; @@ -218,6 +235,45 @@ }; &i2c4 { + stmipi: stmipi@14 { + compatible = "st,st-mipid02"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mco1_pins_a>; + pinctrl-1 = <&mco1_sleep_pins_a>; + reg = <0x14>; + clocks = <&rcc CK_MCO1>; + clock-names = "xclk"; + assigned-clocks = <&rcc CK_MCO1>; + assigned-clock-parents = <&rcc CK_HSE>; + assigned-clock-rates = <24000000>; + VDDE-supply = <&v1v8>; + VDDIN-supply = <&v1v8>; + reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stmipi_0: endpoint { + }; + }; + + port@2 { + reg = <2>; + stmipi_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmi_0>; + }; + }; + }; + }; + hdmi-transmitter@3d { compatible = "adi,adv7513"; reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; @@ -376,6 +432,8 @@ label = "LS-UART1"; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_b>; + /delete-property/dmas; + /delete-property/dma-names; status = "okay"; }; @@ -385,6 +443,8 @@ pinctrl-names = "default"; pinctrl-0 = <&uart7_pins_a>; uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; status = "okay"; }; @@ -394,6 +454,8 @@ pinctrl-0 = <&usart2_pins_a>; pinctrl-1 = <&usart2_sleep_pins_a>; st,hw-flow-ctrl; + /delete-property/dmas; + /delete-property/dma-names; status = "okay"; bluetooth { |