diff options
Diffstat (limited to 'arch/arm/boot/dts/sun5i-a13-olinuxino.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 79 |
1 files changed, 68 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index e31d291d14cb..6b24876ed462 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -48,20 +48,28 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; + aliases { + serial0 = &uart1; + }; + soc@01c00000 { mmc0: mmc@01c0f000 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -83,22 +91,62 @@ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; }; @@ -112,6 +160,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { @@ -133,14 +190,14 @@ pinctrl-0 = <&led_pins_olinuxino>; power { - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; |