diff options
Diffstat (limited to 'arch/arm/boot/dts')
37 files changed, 182 insertions, 36 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3a530968964f..011808490fed 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -633,7 +633,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ - orion5x-lschl.dtb \ + orion5x-linkstation-lschl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ @@ -866,6 +866,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ + sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index ff9417ce93c0..a2ad076822db 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -174,7 +174,6 @@ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */ >; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 18d72a245e88..9e96d60976b7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -145,10 +145,11 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -782,7 +783,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 2df9e6050c2f..97fcaf415de1 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -670,7 +670,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 6c58c7854dd5..832795b0fd0f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -160,7 +160,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011c40a>; + ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index cea36ee6fd07..d15107cba765 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -99,6 +99,7 @@ #size-cells = <1>; compatible = "m25p64"; spi-max-frequency = <30000000>; + m25p,fast-read; reg = <0>; partition@0 { label = "U-Boot-SPL"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 81b8cecb5820..9708157f5daf 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -252,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -262,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -272,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; @@ -332,10 +332,11 @@ ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -510,7 +511,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 6db652ae9bd5..276211e1ee53 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -373,7 +373,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -383,7 +383,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -393,7 +393,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a9ffa49c1ebe..2c9e56f4aac5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1378,6 +1378,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; rtc: rtc@48838000 { @@ -1708,7 +1709,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index dd3de387a7af..38d712be5685 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -18,6 +18,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 96eae6447b25..10d57f9cbb42 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -16,6 +16,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 213d86e6e3ad..e0ba55016a04 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6a7cb9e193e2..15d85f1f85fd 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 905bdb5127a9..148fcf4d3b98 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -17,6 +17,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &mac0; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index c0a5d5f90434..a72031407ebd 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -12,6 +12,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6f7b943378f6..6d5e6a60bee7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index fe0221e4cbf7..ceae909e2201 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 33526cade735..1ee1d542d9ad 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ca51dc03e327..2e516f4985e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ade1951e620..7aa120fbdc71 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -137,7 +137,7 @@ &gpio4 { gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>, <&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>, - <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, + <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>, <&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 000959c05e09..bad3c9f9eeac 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -319,8 +319,6 @@ compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_max-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -401,6 +399,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 8aba8259caf7..559da17297ef 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -250,8 +250,6 @@ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_som2-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -319,6 +317,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 04eba6894c49..6d7bf6496117 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -1158,8 +1166,10 @@ }; vdoa@021e4000 { + compatible = "fsl,imx6q-vdoa"; reg = <0x021e4000 0x4000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_VDOA>; }; uart2: serial@021e8000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 19cbd879c448..cc9572ea2860 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 10f333016197..dd4ec85ecbaa 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { can0 = &flexcan1; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 42cc7c4b6def..b9d7d2d09402 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec1; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8db1eb9d8bbd..5d3a43b8de20 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -50,6 +50,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index da8598402ab8..38faa90007d7 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -158,7 +158,7 @@ &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins &mmc1_cd>; + pinctrl-0 = <&mmc1_pins>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; @@ -193,7 +193,8 @@ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ >; }; @@ -242,12 +243,6 @@ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ >; }; - - mmc1_cd: pinmux_mmc1_cd { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ - >; - }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 71b480968a74..222155ca8ad7 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -988,6 +988,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; dss: dss@58000000 { diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts index 7c999b092e06..ee751995c8d0 100644 --- a/arch/arm/boot/dts/orion5x-lschl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts @@ -2,7 +2,7 @@ * Device Tree file for Buffalo Linkstation LS-CHLv3 * * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk> - * Copyright (C) 2015, 2016 + * Copyright (C) 2015-2017 * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms @@ -52,7 +52,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Buffalo Linkstation Live v3 (LS-CHL)"; + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { /* 128 MB */ diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 5ae4ec59e6ea..c852b69229c9 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -357,7 +357,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index d771f006e1ed..d753ac36788f 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -207,9 +207,8 @@ compatible = "st,asc"; reg = <0x9830000 0x2c>; interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; }; @@ -665,6 +664,7 @@ phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; @@ -977,5 +977,15 @@ status = "disabled"; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index daab16b5ae64..bd1a82e8fffe 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -465,8 +465,16 @@ serial0 { pinctrl_serial0: serial0-0 { st,pins { - tx = <&pio17 0 ALT1 OUT>; - rx = <&pio17 1 ALT1 IN>; + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + cts = <&pio17 2 ALT1 IN>; + rts = <&pio17 3 ALT1 OUT>; }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 06b0696cb6b8..93c14d183e29 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -62,6 +62,11 @@ /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 9062d0f61133..f094eeb6c499 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -140,6 +140,10 @@ cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 8b0b6a2dafba..a4b96184cac1 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -234,6 +234,7 @@ de: display-engine { compatible = "allwinner,sun6i-a31-display-engine"; allwinner,pipelines = <&fe0>; + status = "disabled"; }; soc@01c00000 { diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 6efd915b00ee..81f376f2a44d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -56,7 +56,7 @@ }; &pio { - mmc2_pins_nrst: mmc2@0 { + mmc2_pins_nrst: mmc2-rst-pin { pins = "PC16"; function = "gpio_out"; }; |