diff options
Diffstat (limited to 'arch/arm/boot')
71 files changed, 741 insertions, 293 deletions
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index db05c6ef3e31..60606b0f378d 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -7,12 +7,3 @@ hyp-stub.S piggy_data vmlinux vmlinux.lds - -# borrowed libfdt files -fdt.c -fdt.h -fdt_ro.c -fdt_rw.c -fdt_wip.c -libfdt.h -libfdt_internal.h diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 9c11e7490292..00602a6fba04 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -76,29 +76,30 @@ compress-$(CONFIG_KERNEL_LZMA) = lzma compress-$(CONFIG_KERNEL_XZ) = xzkern compress-$(CONFIG_KERNEL_LZ4) = lz4 -# Borrowed libfdt files for the ATAG compatibility mode - -libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c -libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h - -libfdt_objs := $(addsuffix .o, $(basename $(libfdt))) - -$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% - $(call cmd,shipped) - -$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \ - $(addprefix $(obj)/,$(libfdt_hdrs)) +libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector +$(foreach o, $(libfdt_objs) atags_to_fdt.o, \ + $(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt $(nossp-flags-y))) + +# These were previously generated C files. When you are building the kernel +# with O=, make sure to remove the stale files in the output tree. Otherwise, +# the build system wrongly compiles the stale ones. +ifdef building_out_of_srctree +$(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c)) +endif + targets := vmlinux vmlinux.lds piggy_data piggy.o \ lib1funcs.o ashldi3.o bswapsdi2.o \ head.o $(OBJS) -clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ - $(libfdt) $(libfdt_hdrs) hyp-stub.S +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -107,15 +108,6 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -# -fstack-protector-strong triggers protection checks in this code, -# but it is being used too early to link to meaningful stack_chk logic. -nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector -CFLAGS_atags_to_fdt.o := $(nossp-flags-y) -CFLAGS_fdt.o := $(nossp-flags-y) -CFLAGS_fdt_ro.o := $(nossp-flags-y) -CFLAGS_fdt_rw.o := $(nossp-flags-y) -CFLAGS_fdt_wip.o := $(nossp-flags-y) - ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \ -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN) asflags-y := -DZIMAGE diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 64c49747f8a3..8452753efebe 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/libfdt_env.h> #include <asm/setup.h> #include <libfdt.h> diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index 62286da318e7..c0e7a745103e 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -60,7 +60,7 @@ optional_header: .long __pecoff_code_size @ SizeOfCode .long __pecoff_data_size @ SizeOfInitializedData .long 0 @ SizeOfUninitializedData - .long efi_entry - start @ AddressOfEntryPoint + .long efi_pe_entry - start @ AddressOfEntryPoint .long start_offset @ BaseOfCode .long __pecoff_data_start - start @ BaseOfData diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c new file mode 100644 index 000000000000..f8ea7a201ab1 --- /dev/null +++ b/arch/arm/boot/compressed/fdt.c @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "../../../../lib/fdt.c" diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c new file mode 100644 index 000000000000..93970a4ad5ae --- /dev/null +++ b/arch/arm/boot/compressed/fdt_ro.c @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "../../../../lib/fdt_ro.c" diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c new file mode 100644 index 000000000000..f7c6b8b7e01c --- /dev/null +++ b/arch/arm/boot/compressed/fdt_rw.c @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "../../../../lib/fdt_rw.c" diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c new file mode 100644 index 000000000000..048d2c7a088d --- /dev/null +++ b/arch/arm/boot/compressed/fdt_wip.c @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "../../../../lib/fdt_wip.c" diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index e8e1c866e413..c79db44ba128 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -287,28 +287,22 @@ not_angel: */ mov r0, pc cmp r0, r4 - ldrcc r0, LC0+28 + ldrcc r0, .Lheadroom addcc r0, r0, pc cmpcc r4, r0 orrcc r4, r4, #1 @ remember we skipped cache_on blcs cache_on -restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r6, r11, r12} - ldr sp, [r0, #24] - - /* - * We might be running at a different address. We need - * to fix up various pointers. - */ - sub r0, r0, r1 @ calculate the delta offset - add r6, r6, r0 @ _edata +restart: adr r0, LC1 + ldr sp, [r0] + ldr r6, [r0, #4] + add sp, sp, r0 + add r6, r6, r0 get_inflated_image_size r9, r10, lr #ifndef CONFIG_ZBOOT_ROM /* malloc space is above the relocated stack (64k max) */ - add sp, sp, r0 add r10, sp, #0x10000 #else /* @@ -322,9 +316,6 @@ restart: adr r0, LC0 mov r5, #0 @ init dtb size to 0 #ifdef CONFIG_ARM_APPENDED_DTB /* - * r0 = delta - * r2 = BSS start - * r3 = BSS end * r4 = final kernel address (possibly with LSB set) * r5 = appended dtb size (still unknown) * r6 = _edata @@ -332,8 +323,6 @@ restart: adr r0, LC0 * r8 = atags/device tree pointer * r9 = size of decompressed image * r10 = end of this image, including bss/stack/malloc space if non XIP - * r11 = GOT start - * r12 = GOT end * sp = stack pointer * * if there are device trees (dtb) appended to zImage, advance r10 so that the @@ -381,7 +370,6 @@ restart: adr r0, LC0 /* temporarily relocate the stack past the DTB work space */ add sp, sp, r5 - stmfd sp!, {r0-r3, ip, lr} mov r0, r8 mov r1, r6 mov r2, r5 @@ -400,7 +388,6 @@ restart: adr r0, LC0 mov r2, r5 bleq atags_to_fdt - ldmfd sp!, {r0-r3, ip, lr} sub sp, sp, r5 #endif @@ -537,6 +524,10 @@ dtb_check_done: mov pc, r0 wont_overwrite: + adr r0, LC0 + ldmia r0, {r1, r2, r3, r11, r12} + sub r0, r0, r1 @ calculate the delta offset + /* * If delta is zero, we are running at the address we were linked at. * r0 = delta @@ -660,13 +651,18 @@ not_relocated: mov r0, #0 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word _edata @ r6 .word _got_start @ r11 .word _got_end @ ip - .word .L_user_stack_end @ sp - .word _end - restart + 16384 + 1024*1024 .size LC0, . - LC0 + .type LC1, #object +LC1: .word .L_user_stack_end - LC1 @ sp + .word _edata - LC1 @ r6 + .size LC1, . - LC1 + +.Lheadroom: + .word _end - restart + 16384 + 1024*1024 + .Linflated_image_size_offset: .long (input_data_end - 4) - . @@ -1434,38 +1430,26 @@ reloc_code_end: #ifdef CONFIG_EFI_STUB ENTRY(efi_enter_kernel) - mov r7, r0 @ preserve image base - mov r4, r1 @ preserve DT pointer + mov r4, r0 @ preserve image base + mov r8, r1 @ preserve DT pointer - mov r0, r4 @ DT start - add r1, r4, r2 @ DT end - bl cache_clean_flush + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + tst r0, #0x1 @ MMU enabled? + orreq r4, r4, #1 @ set LSB if not - mov r0, r7 @ relocated zImage - ldr r1, =_edata @ size of zImage - add r1, r1, r0 @ end of zImage + mov r0, r8 @ DT start + add r1, r8, r2 @ DT end bl cache_clean_flush - @ The PE/COFF loader might not have cleaned the code we are - @ running beyond the PoU, and so calling cache_off below from - @ inside the PE/COFF loader allocated region is unsafe unless - @ we explicitly clean it to the PoC. - ARM( adrl r0, call_cache_fn ) - THUMB( adr r0, call_cache_fn ) @ region of code we will - adr r1, 0f @ run with MMU off - bl cache_clean_flush - bl cache_off + adr r0, 0f @ switch to our stack + ldr sp, [r0] + add sp, sp, r0 - @ Set parameters for booting zImage according to boot protocol - @ put FDT address in r2, it was returned by efi_entry() - @ r1 is the machine type, and r0 needs to be 0 - mov r0, #0 - mov r1, #0xFFFFFFFF - mov r2, r4 - add r7, r7, #(__efi_start - start) - mov pc, r7 @ no mode switch + mov r5, #0 @ appended DTB size + mov r7, #0xFFFFFFFF @ machine ID + b wont_overwrite ENDPROC(efi_enter_kernel) -0: +0: .long .L_user_stack_end - . #endif .align diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h deleted file mode 100644 index 6a0f1f524466..000000000000 --- a/arch/arm/boot/compressed/libfdt_env.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ARM_LIBFDT_ENV_H -#define _ARM_LIBFDT_ENV_H - -#include <linux/limits.h> -#include <linux/types.h> -#include <linux/string.h> -#include <asm/byteorder.h> - -#define INT32_MAX S32_MAX -#define UINT32_MAX U32_MAX - -typedef __be16 fdt16_t; -typedef __be32 fdt32_t; -typedef __be64 fdt64_t; - -#define fdt16_to_cpu(x) be16_to_cpu(x) -#define cpu_to_fdt16(x) cpu_to_be16(x) -#define fdt32_to_cpu(x) be32_to_cpu(x) -#define cpu_to_fdt32(x) cpu_to_be32(x) -#define fdt64_to_cpu(x) be64_to_cpu(x) -#define cpu_to_fdt64(x) cpu_to_be64(x) - -#endif diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index b247f399de71..09ac33f52814 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -42,7 +42,7 @@ SECTIONS } .table : ALIGN(4) { _table_start = .; - LONG(ZIMAGE_MAGIC(2)) + LONG(ZIMAGE_MAGIC(4)) LONG(ZIMAGE_MAGIC(0x5a534c4b)) LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start)) LONG(ZIMAGE_MAGIC(_kernel_bss_size)) @@ -63,9 +63,11 @@ SECTIONS _etext = .; .got.plt : { *(.got.plt) } +#ifndef CONFIG_EFI_STUB _got_start = .; .got : { *(.got) } _got_end = .; +#endif /* ensure the zImage file size is always a multiple of 64 bits */ /* (without a dummy byte, ld just ignores the empty section) */ @@ -74,11 +76,14 @@ SECTIONS #ifdef CONFIG_EFI_STUB .data : ALIGN(4096) { __pecoff_data_start = .; + _got_start = .; + *(.got) + _got_end = .; /* * The EFI stub always executes from RAM, and runs strictly before the * decompressor, so we can make an exception for its r/w data, and keep it */ - *(.data.efistub) + *(.data.efistub .bss.efistub) __pecoff_data_end = .; /* diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 5ed7f3c58c0f..7ff11d6bf0f2 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -330,9 +330,8 @@ }; }; - target-module@31000 { /* 0x44e31000, ap 25 40.0 */ + timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x31000 0x4>, <0x31010 0x4>, <0x31014 0x4>; @@ -1117,9 +1116,8 @@ }; }; - target-module@40000 { /* 0x48040000, ap 22 1e.0 */ + timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x40000 0x4>, <0x40010 0x4>, <0x40014 0x4>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index a35f5052d76f..3b177c9c4412 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -619,3 +619,23 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index e0b5a00e2078..dc8927f14b6c 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -169,5 +169,25 @@ status = "disabled"; }; -/include/ "am35xx-clocks.dtsi" -/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" +#include "am35xx-clocks.dtsi" +#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index dba87bfaf33e..b4861f70f178 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -553,3 +553,23 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 811c8cae315b..d692e3b2812a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -943,7 +943,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &elm { diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 9f66f96d09c9..a958f9ee4a5a 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -504,7 +504,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &rtc { diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 49c6a872052e..0d0f9fe4a882 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -328,9 +328,8 @@ }; }; - target-module@31000 { /* 0x44e31000, ap 24 40.0 */ + timer1_target: target-module@31000 { /* 0x44e31000, ap 24 40.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x31000 0x4>, <0x31010 0x4>, <0x31014 0x4>; @@ -450,7 +449,6 @@ target-module@86000 { /* 0x44e86000, ap 40 70.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x86000 0x4>, <0x86004 0x4>; reg-names = "rev", "sysc"; @@ -868,9 +866,8 @@ }; }; - target-module@40000 { /* 0x48040000, ap 18 1e.0 */ + timer2_target: target-module@40000 { /* 0x48040000, ap 18 1e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x40000 0x4>, <0x40010 0x4>, <0x40014 0x4>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 25222497f828..4d5a7ca2e25d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -833,13 +833,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 62eb2b6ff10b..99a408a2ec6a 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -216,13 +216,13 @@ &cpsw_port1 { phy-handle = <ðphy0_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <1>; }; &cpsw_port2 { phy-handle = <ðphy1_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <2>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index fa0088025b2c..85c95cc551dd 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -40,3 +40,7 @@ status = "okay"; dual_emac; }; + +&m_can0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 9cfdc29c283d..94135fc5dd44 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -468,13 +468,13 @@ &cpsw_emac0 { phy-handle = <&phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 8ec71342f289..2c0aab352b44 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -450,13 +450,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 6142c672811e..5e5f5ca3c86f 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -75,7 +75,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -91,7 +91,7 @@ compatible = "arm,cortex-a9-twd-wdt"; reg = <0x20620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 4c3f606e5b8d..f65448c01e31 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -24,7 +24,7 @@ leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 44ed5a798164..7702e048e110 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -308,14 +308,30 @@ ti,hwmods = "mcspi4"; }; - timer1: timer@2e000 { - compatible = "ti,dm814-timer"; - reg = <0x2e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@2e000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; clocks = <&timer1_fck>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; }; uart1: uart@20000 { @@ -348,13 +364,29 @@ dma-names = "tx", "rx"; }; - timer2: timer@40000 { - compatible = "ti,dm814-timer"; - reg = <0x40000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; + timer2_target: target-module@40000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; clocks = <&timer2_fck>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,dm814-timer"; + reg = <0 0x1000>; + interrupts = <68>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; }; timer3: timer@42000 { @@ -693,7 +725,7 @@ davinci_mdio: mdio@800 { compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; - clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clocks = <&cpsw_125mhz_gclk>; clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; @@ -735,3 +767,23 @@ }; #include "dm814x-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 2a4934b60ded..3551a64963f8 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -440,23 +440,55 @@ dma-names = "tx", "rx"; }; - timer1: timer@4802e000 { - compatible = "ti,dm816-timer"; - reg = <0x4802e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&timer1_fck>; + timer1_target: target-module@4802e000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x4802e000 0x4>, + <0x4802e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4802e000 0x1000>; + + timer1: timer@0 { + compatible = "ti,dm816-timer"; + reg = <0 0x1000>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + }; }; - timer2: timer@48040000 { - compatible = "ti,dm816-timer"; - reg = <0x48040000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; + timer2_target: target-module@48040000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x48040000 0x4>, + <0x48040010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48040000 0x1000>; + + timer2: timer@0 { + compatible = "ti,dm816-timer"; + reg = <0 0x1000>; + interrupts = <68>; + clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + }; }; timer3: timer@48042000 { @@ -642,3 +674,23 @@ }; #include "dm816x-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 1abd455cf15a..62ca89551219 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1143,7 +1143,6 @@ target-module@32000 { /* 0x48032000, ap 5 3e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x32000 0x4>, <0x32010 0x4>; reg-names = "rev", "sysc"; @@ -1171,7 +1170,6 @@ target-module@34000 { /* 0x48034000, ap 7 46.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x34000 0x4>, <0x34010 0x4>; reg-names = "rev", "sysc"; @@ -1199,7 +1197,6 @@ target-module@36000 { /* 0x48036000, ap 9 4e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x36000 0x4>, <0x36010 0x4>; reg-names = "rev", "sysc"; @@ -4297,7 +4294,6 @@ target-module@4000 { /* 0x4ae04000, ap 15 40.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4010 0x4>; reg-names = "rev", "sysc"; @@ -4432,9 +4428,8 @@ }; }; - target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ + timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8f4e4941984f..099546be5014 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -172,6 +172,7 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; + dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. @@ -185,7 +186,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -230,6 +230,7 @@ #address-cells = <1>; ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; + dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; @@ -240,7 +241,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -1080,3 +1080,13 @@ reg = <0x1c00 0x60>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 0cd75dadf292..188639738dc3 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -75,8 +75,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts index 0d594e4bd559..a1173bf5bff5 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts @@ -38,7 +38,7 @@ }; &switch_ports { - /delete-node/ port@2; + /delete-node/ port@3; }; &touchscreen { diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 95b8f2d71821..fb0980190aa0 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 611cb7ae7e55..8f762d9c5ae9 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index e4cb118f88c6..1ea64ecf4291 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -53,17 +53,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; -}; - &ldb { fsl,dual-channel; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index fa27dcdf06f1..1938b04199c4 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -377,3 +377,18 @@ #interrupt-cells = <1>; }; }; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index fe59dde41b64..28b35ccb3757 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -204,6 +204,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + fsl,magic-packet; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 39d4afd9e6f8..32114cf6acee 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1046,7 +1046,7 @@ <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp"; - gpr = <&gpr>; + fsl,stop-mode = <&gpr 0x34 27>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index e03133740078..94e3df47d1ad 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -930,6 +930,7 @@ "enet_clk_ref", "enet_out"; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; @@ -1039,6 +1040,7 @@ <&clks IMX6SX_CLK_ENET_PTP>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; + fsl,stop-mode = <&gpr 0x10 4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 35e730167960..5379a03391bd 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -520,6 +520,7 @@ "enet_clk_ref", "enet_out"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; + fsl,stop-mode = <&gpr 0x10 4>; status = "disabled"; }; @@ -856,6 +857,7 @@ "enet_clk_ref", "enet_out"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 4c22828df55f..cff875b80b60 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -153,6 +153,7 @@ "enet_clk_ref", "enet_out"; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8bac49137692..f6bb35d3ce51 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1190,6 +1190,7 @@ "enet_clk_ref", "enet_out"; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index ede2e0c999b1..e10f99278c77 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -72,8 +72,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 9067e0ef4240..06fbffa81636 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -367,6 +367,8 @@ }; &mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&wl12xx_vmmc>; /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH @@ -472,6 +474,37 @@ >; }; + /* + * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3 + * for gpio_100, but the internal pull makes wlan flakey on some + * devices. Off mode value should be tested if we have off mode working + * later on. + */ + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ + OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) + + /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */ + OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */ + OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */ + OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1) + + /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + /* gpmc_ncs0.gpio_50 */ poweroff_gpio: pinmux_poweroff_pins { pinctrl-single,pins = < @@ -690,14 +723,18 @@ }; /* - * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for - * uart1 wakeirq. + * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 + * for wake-up events for both the USB PHY and the UART. We can use gpio_149 + * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we + * have gpio_149 trigger before the UART transfer starts. */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xfc>; + &omap4_pmx_core 0x110>; + uart-has-rtscts; + current-speed = <115200>; }; &uart3 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 0e453fec2e3a..8a5cb44bfe2f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -201,11 +201,32 @@ clock-frequency = <48000000>; }; - timer2: timer@4802a000 { - compatible = "ti,omap2420-timer"; - reg = <0x4802a000 0x400>; - interrupts = <38>; - ti,hwmods = "timer2"; + timer2_target: target-module@4802a000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x4802a000 0x4>, + <0x4802a010 0x4>, + <0x4802a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt2_fck>, <&gpt2_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4802a000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <38>; + }; }; timer3: timer@48078000 { diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index aba542d63d6d..6c5c7c0e8b94 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -68,10 +68,23 @@ }; }; - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x20>; - ti,hwmods = "counter_32k"; + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&func_32k_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0 0x20>; + }; }; }; @@ -194,12 +207,33 @@ }; }; - timer1: timer@48028000 { - compatible = "ti,omap2420-timer"; - reg = <0x48028000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@48028000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48028000 0x4>, + <0x48028010 0x4>, + <0x48028014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48028000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <37>; + ti,timer-alwon; + }; }; wd_timer2: wdt@48022000 { @@ -218,5 +252,15 @@ compatible = "ti,omap2420-i2c"; }; -/include/ "omap24xx-clocks.dtsi" -/include/ "omap2420-clocks.dtsi" +#include "omap24xx-clocks.dtsi" +#include "omap2420-clocks.dtsi" + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&func_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 15ef7593be12..6a1f5bb3c06a 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -81,10 +81,23 @@ }; }; - counter32k: counter@20000 { - compatible = "ti,omap-counter32k"; - reg = <0x20000 0x20>; - ti,hwmods = "counter_32k"; + target-module@20000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x20000 0x4>, + <0x20004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&func_32k_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0 0x20>; + }; }; }; @@ -277,12 +290,33 @@ }; }; - timer1: timer@49018000 { - compatible = "ti,omap2420-timer"; - reg = <0x49018000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@49018000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x49018000 0x4>, + <0x49018010 0x4>, + <0x49018014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49018000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <37>; + ti,timer-alwon; + }; }; mcspi3: spi@480b8000 { @@ -321,5 +355,15 @@ compatible = "ti,omap2430-i2c"; }; -/include/ "omap24xx-clocks.dtsi" -/include/ "omap2430-clocks.dtsi" +#include "omap24xx-clocks.dtsi" +#include "omap2430-clocks.dtsi" + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&func_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4ed3f93f5841..dfa158647d91 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -304,6 +304,39 @@ phys = <0 &hsusb2_phy>; }; +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because if unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 162d0726b008..c2995a280729 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -14,3 +14,36 @@ display2 = &tv0; }; }; + +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because if unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 634ea16a711e..1296d0643943 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -193,10 +193,23 @@ }; }; - counter32k: counter@48320000 { - compatible = "ti,omap-counter32k"; - reg = <0x48320000 0x20>; - ti,hwmods = "counter_32k"; + target-module@48320000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x48320000 0x4>, + <0x48320004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48320000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; }; intc: interrupt-controller@48200000 { @@ -637,19 +650,63 @@ dma-names = "rx"; }; - timer1: timer@48318000 { - compatible = "ti,omap3430-timer"; - reg = <0x48318000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@48318000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48318000 0x4>, + <0x48318010 0x4>, + <0x48318014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48318000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&gpt1_fck>; + clock-names = "fck"; + interrupts = <37>; + ti,timer-alwon; + }; }; - timer2: timer@49032000 { - compatible = "ti,omap3430-timer"; - reg = <0x49032000 0x400>; - interrupts = <38>; - ti,hwmods = "timer2"; + timer2_target: target-module@49032000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x49032000 0x4>, + <0x49032010 0x4>, + <0x49032014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt2_fck>, <&gpt2_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49032000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0 0x400>; + interrupts = <38>; + }; }; timer3: timer@49034000 { @@ -723,13 +780,34 @@ ti,timer-pwm; }; - timer12: timer@48304000 { - compatible = "ti,omap3430-timer"; - reg = <0x48304000 0x400>; - interrupts = <95>; - ti,hwmods = "timer12"; - ti,timer-alwon; - ti,timer-secure; + timer12_target: target-module@48304000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48304000 0x4>, + <0x48304010 0x4>, + <0x48304014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&gpt12_fck>, <&gpt12_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48304000 0x1000>; + + timer12: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0 0x400>; + interrupts = <95>; + ti,timer-alwon; + ti,timer-secure; + }; }; usbhstll: usbhstll@48062000 { @@ -886,4 +964,14 @@ }; }; -/include/ "omap3xxx-clocks.dtsi" +#include "omap3xxx-clocks.dtsi" + +/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&omap_32k_fck>; + }; +}; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index ef59e4e97d7c..fcc52121ff09 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -974,7 +974,6 @@ target-module@4000 { /* 0x4a304000, ap 17 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4004 0x4>; reg-names = "rev", "sysc"; @@ -1139,9 +1138,8 @@ }; }; - target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + timer1_target: target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>, <0x8014 0x4>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 763bdea8c829..6c2b07f0704d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -655,3 +655,13 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 55999655a3bc..5217805bf126 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -2181,7 +2181,6 @@ target-module@4000 { /* 0x4ae04000, ap 17 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4010 0x4>; reg-names = "rev", "sysc"; @@ -2367,9 +2366,8 @@ }; }; - target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ + timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5e74f441c7e5..fb889c5b00c9 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -667,3 +667,13 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index c6956015dedc..74d8e2c8e4b3 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -577,5 +577,33 @@ "legacy"; status = "disabled"; }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq4019-mdio"; + reg = <0x90000 0x64>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi index 72b79770e336..cace43807497 100644 --- a/arch/arm/boot/dts/r7s9210.dtsi +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -304,7 +304,6 @@ reg = <0xe803b000 0x30>; interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 36>; - clock-names = "ostm0"; power-domains = <&cpg>; status = "disabled"; }; @@ -314,7 +313,6 @@ reg = <0xe803c000 0x30>; interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 35>; - clock-names = "ostm1"; power-domains = <&cpg>; status = "disabled"; }; @@ -324,7 +322,6 @@ reg = <0xe803d000 0x30>; interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 34>; - clock-names = "ostm2"; power-domains = <&cpg>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index a5cd31229fbd..a3ba722a9d7f 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -131,7 +131,14 @@ cmt1: timer@e6130000 { compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 014805894ea7..0588d4446f9a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -479,7 +479,7 @@ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7740-cpg-clocks"; reg = <0xe6150000 0x10000>; - clocks = <&extal1_clk>, <&extalr_clk>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; #clock-cells = <1>; clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r", diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index 92aa26ba423c..b1f679da36b2 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -84,8 +84,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 69745def44d4..bfe778c4c47b 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -364,8 +364,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index 4138efb2766d..6a457bc9280a 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -297,8 +297,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 687167b70cb6..fc74c6cd6def 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -387,8 +387,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a8e0335148a5..114bf1c4199b 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -181,8 +181,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 248eb717eb35..9368ac2cf508 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -289,8 +289,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index bd2a63bdab3d..ba2d2a589012 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -249,14 +249,12 @@ */ hdmi@3d { compatible = "adi,adv7513"; - reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; + reg-names = "main", "edid", "cec", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -280,14 +278,12 @@ hdmi@39 { compatible = "adi,adv7513"; - reg = <0x39>, <0x29>, <0x49>, <0x59>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x39>, <0x49>, <0x29>, <0x59>; + reg-names = "main", "edid", "cec", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index cfe06a74ce89..79baf06019f5 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -366,8 +366,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 9aaa96ea9943..b8b0941f677c 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -255,8 +255,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 781ac7583522..d9a0c9a29b68 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -128,7 +128,7 @@ assigned-clocks = <&cru SCLK_GPU>; assigned-clock-rates = <100000000>; clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 5670b33fd1bd..aed879db6c15 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; clocks = <&cru SCLK_MAC_PHY>; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts index 96c9372a89ee..263393ac4fa6 100644 --- a/arch/arm/boot/dts/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -155,7 +155,7 @@ #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index b37ba72d32ca..b0fd92befdeb 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -555,7 +555,7 @@ "pp1", "ppmmu1"; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU_A>; status = "disabled"; }; @@ -1030,7 +1030,7 @@ }; }; - spi-0 { + spi0 { spi0_clk: spi0-clk { rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>; }; @@ -1048,7 +1048,7 @@ }; }; - spi-1 { + spi1 { spi1_clk: spi1-clk { rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index f9fcb7e9657b..d929b60517ab 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -84,7 +84,7 @@ compatible = "arm,mali-400"; reg = <0x10090000 0x10000>; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; assigned-clocks = <&cru ACLK_GPU>; assigned-clock-rates = <100000000>; resets = <&cru SRST_GPU>; |