diff options
Diffstat (limited to 'arch/arm/kernel/hyp-stub.S')
| -rw-r--r-- | arch/arm/kernel/hyp-stub.S | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S new file mode 100644 index 000000000000..b03e9244e5ad --- /dev/null +++ b/arch/arm/kernel/hyp-stub.S @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2012 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/virt.h> + +/* + * For the kernel proper, we need to find out the CPU boot mode long after + * boot, so we need to store it in a writable variable. + * + * This is not in .bss, because we set it sufficiently early that the boot-time + * zeroing of .bss would clobber it. + */ +.data +ENTRY(__boot_cpu_mode) + .long 0 +.text + + /* + * Save the primary CPU boot mode. Requires 3 scratch registers. + */ + .macro store_primary_cpu_mode reg1, reg2, reg3 + mrs \reg1, cpsr + and \reg1, \reg1, #MODE_MASK + adr \reg2, .L__boot_cpu_mode_offset + ldr \reg3, [\reg2] + str \reg1, [\reg2, \reg3] + .endm + + /* + * Compare the current mode with the one saved on the primary CPU. + * If they don't match, record that fact. The Z bit indicates + * if there's a match or not. + * Requires 3 additionnal scratch registers. + */ + .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 + adr \reg2, .L__boot_cpu_mode_offset + ldr \reg3, [\reg2] + ldr \reg1, [\reg2, \reg3] + cmp \mode, \reg1 @ matches primary CPU boot mode? + orrne r7, r7, #BOOT_CPU_MODE_MISMATCH + strne r7, [r5, r6] @ record what happened and give up + .endm + +/* + * Hypervisor stub installation functions. + * + * These must be called with the MMU and D-cache off. + * They are not ABI compliant and are only intended to be called from the kernel + * entry points in head.S. + */ +@ Call this from the primary CPU +ENTRY(__hyp_stub_install) + store_primary_cpu_mode r4, r5, r6 +ENDPROC(__hyp_stub_install) + + @ fall through... + +@ Secondary CPUs should call here +ENTRY(__hyp_stub_install_secondary) + mrs r4, cpsr + and r4, r4, #MODE_MASK + + /* + * If the secondary has booted with a different mode, give up + * immediately. + */ + compare_cpu_mode_with_primary r4, r5, r6, r7 + bxne lr + + /* + * Once we have given up on one CPU, we do not try to install the + * stub hypervisor on the remaining ones: because the saved boot mode + * is modified, it can't compare equal to the CPSR mode field any + * more. + * + * Otherwise... + */ + + cmp r4, #HYP_MODE + bxne lr @ give up if the CPU is not in HYP mode + +/* + * Configure HSCTLR to set correct exception endianness/instruction set + * state etc. + * Turn off all traps + * Eventually, CPU-specific code might be needed -- assume not for now + * + * This code relies on the "eret" instruction to synchronize the + * various coprocessor accesses. + */ + @ Now install the hypervisor stub: + adr r7, __hyp_stub_vectors + mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR) + + @ Disable all traps, so we don't get any nasty surprise + mov r7, #0 + mcr p15, 4, r7, c1, c1, 0 @ HCR + mcr p15, 4, r7, c1, c1, 2 @ HCPTR + mcr p15, 4, r7, c1, c1, 3 @ HSTR + +THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE +#ifdef CONFIG_CPU_BIG_ENDIAN + orr r7, #(1 << 9) @ HSCTLR.EE +#endif + mcr p15, 4, r7, c1, c0, 0 @ HSCTLR + + mrc p15, 4, r7, c1, c1, 1 @ HDCR + and r7, #0x1f @ Preserve HPMN + mcr p15, 4, r7, c1, c1, 1 @ HDCR + + bic r7, r4, #MODE_MASK + orr r7, r7, #SVC_MODE +THUMB( orr r7, r7, #PSR_T_BIT ) + msr spsr_cxsf, r7 @ This is SPSR_hyp. + + __MSR_ELR_HYP(14) @ msr elr_hyp, lr + __ERET @ return, switching to SVC mode + @ The boot CPU mode is left in r4. +ENDPROC(__hyp_stub_install_secondary) + +__hyp_stub_do_trap: + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + mcrne p15, 4, r0, c12, c0, 0 @ set HVBAR + __ERET +ENDPROC(__hyp_stub_do_trap) + +/* + * __hyp_set_vectors: Call this after boot to set the initial hypervisor + * vectors as part of hypervisor installation. On an SMP system, this should + * be called on each CPU. + * + * r0 must be the physical address of the new vector table (which must lie in + * the bottom 4GB of physical address space. + * + * r0 must be 32-byte aligned. + * + * Before calling this, you must check that the stub hypervisor is installed + * everywhere, by waiting for any secondary CPUs to be brought up and then + * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true. + * + * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or + * something else went wrong... in such cases, trying to install a new + * hypervisor is unlikely to work as desired. + * + * When you call into your shiny new hypervisor, sp_hyp will contain junk, + * so you will need to set that to something sensible at the new hypervisor's + * initialisation entry point. + */ +ENTRY(__hyp_get_vectors) + mov r0, #-1 +ENDPROC(__hyp_get_vectors) + @ fall through +ENTRY(__hyp_set_vectors) + __HVC(0) + bx lr +ENDPROC(__hyp_set_vectors) + +.align 2 +.L__boot_cpu_mode_offset: + .long __boot_cpu_mode - . + +.align 5 +__hyp_stub_vectors: +__hyp_stub_reset: W(b) . +__hyp_stub_und: W(b) . +__hyp_stub_svc: W(b) . +__hyp_stub_pabort: W(b) . +__hyp_stub_dabort: W(b) . +__hyp_stub_trap: W(b) __hyp_stub_do_trap +__hyp_stub_irq: W(b) . +__hyp_stub_fiq: W(b) . +ENDPROC(__hyp_stub_vectors) + |