diff options
Diffstat (limited to 'arch/arm/kernel/kprobes-test.h')
| -rw-r--r-- | arch/arm/kernel/kprobes-test.h | 435 |
1 files changed, 0 insertions, 435 deletions
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h deleted file mode 100644 index 4430990e90e7..000000000000 --- a/arch/arm/kernel/kprobes-test.h +++ /dev/null @@ -1,435 +0,0 @@ -/* - * arch/arm/kernel/kprobes-test.h - * - * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define VERBOSE 0 /* Set to '1' for more logging of test cases */ - -#ifdef CONFIG_THUMB2_KERNEL -#define NORMAL_ISA "16" -#else -#define NORMAL_ISA "32" -#endif - - -/* Flags used in kprobe_test_flags */ -#define TEST_FLAG_NO_ITBLOCK (1<<0) -#define TEST_FLAG_FULL_ITBLOCK (1<<1) -#define TEST_FLAG_NARROW_INSTR (1<<2) - -extern int kprobe_test_flags; -extern int kprobe_test_cc_position; - - -#define TEST_MEMORY_SIZE 256 - - -/* - * Test case structures. - * - * The arguments given to test cases can be one of three types. - * - * ARG_TYPE_REG - * Load a register with the given value. - * - * ARG_TYPE_PTR - * Load a register with a pointer into the stack buffer (SP + given value). - * - * ARG_TYPE_MEM - * Store the given value into the stack buffer at [SP+index]. - * - */ - -#define ARG_TYPE_END 0 -#define ARG_TYPE_REG 1 -#define ARG_TYPE_PTR 2 -#define ARG_TYPE_MEM 3 - -#define ARG_FLAG_UNSUPPORTED 0x01 -#define ARG_FLAG_SUPPORTED 0x02 -#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */ -#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */ - -struct test_arg { - u8 type; /* ARG_TYPE_x */ - u8 _padding[7]; -}; - -struct test_arg_regptr { - u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */ - u8 reg; - u8 _padding[2]; - u32 val; -}; - -struct test_arg_mem { - u8 type; /* ARG_TYPE_MEM */ - u8 index; - u8 _padding[2]; - u32 val; -}; - -struct test_arg_end { - u8 type; /* ARG_TYPE_END */ - u8 flags; /* ARG_FLAG_x */ - u16 code_offset; - u16 branch_offset; - u16 end_offset; -}; - - -/* - * Building blocks for test cases. - * - * Each test case is wrapped between TESTCASE_START and TESTCASE_END. - * - * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are - * used followed by a terminating TEST_ARG_END. - * - * After this, the instruction to be tested is defined with TEST_INSTRUCTION. - * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards). - * - * Some specific test cases may make use of other custom constructs. - */ - -#if VERBOSE -#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__) -#else -#define verbose(fmt, ...) -#endif - -#define TEST_GROUP(title) \ - verbose("\n"); \ - verbose(title"\n"); \ - verbose("---------------------------------------------------------\n"); - -#define TESTCASE_START(title) \ - __asm__ __volatile__ ( \ - "bl __kprobes_test_case_start \n\t" \ - ".pushsection .rodata \n\t" \ - "10: \n\t" \ - /* don't use .asciz here as 'title' may be */ \ - /* multiple strings to be concatenated. */ \ - ".ascii "#title" \n\t" \ - ".byte 0 \n\t" \ - ".popsection \n\t" \ - ".word 10b \n\t" - -#define TEST_ARG_REG(reg, val) \ - ".byte "__stringify(ARG_TYPE_REG)" \n\t" \ - ".byte "#reg" \n\t" \ - ".short 0 \n\t" \ - ".word "#val" \n\t" - -#define TEST_ARG_PTR(reg, val) \ - ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \ - ".byte "#reg" \n\t" \ - ".short 0 \n\t" \ - ".word "#val" \n\t" - -#define TEST_ARG_MEM(index, val) \ - ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \ - ".byte "#index" \n\t" \ - ".short 0 \n\t" \ - ".word "#val" \n\t" - -#define TEST_ARG_END(flags) \ - ".byte "__stringify(ARG_TYPE_END)" \n\t" \ - ".byte "TEST_ISA flags" \n\t" \ - ".short 50f-0f \n\t" \ - ".short 2f-0f \n\t" \ - ".short 99f-0f \n\t" \ - ".code "TEST_ISA" \n\t" \ - "0: \n\t" - -#define TEST_INSTRUCTION(instruction) \ - "50: nop \n\t" \ - "1: "instruction" \n\t" \ - " nop \n\t" - -#define TEST_BRANCH_F(instruction) \ - TEST_INSTRUCTION(instruction) \ - " b 99f \n\t" \ - "2: nop \n\t" - -#define TEST_BRANCH_B(instruction) \ - " b 50f \n\t" \ - " b 99f \n\t" \ - "2: nop \n\t" \ - " b 99f \n\t" \ - TEST_INSTRUCTION(instruction) - -#define TEST_BRANCH_FX(instruction, codex) \ - TEST_INSTRUCTION(instruction) \ - " b 99f \n\t" \ - codex" \n\t" \ - " b 99f \n\t" \ - "2: nop \n\t" - -#define TEST_BRANCH_BX(instruction, codex) \ - " b 50f \n\t" \ - " b 99f \n\t" \ - "2: nop \n\t" \ - " b 99f \n\t" \ - codex" \n\t" \ - TEST_INSTRUCTION(instruction) - -#define TESTCASE_END \ - "2: \n\t" \ - "99: \n\t" \ - " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \ - ".code "NORMAL_ISA" \n\t" \ - : : \ - : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \ - ); - - -/* - * Macros to define test cases. - * - * Those of the form TEST_{R,P,M}* can be used to define test cases - * which take combinations of the three basic types of arguments. E.g. - * - * TEST_R One register argument - * TEST_RR Two register arguments - * TEST_RPR A register, a pointer, then a register argument - * - * For testing instructions which may branch, there are macros TEST_BF_* - * and TEST_BB_* for branching forwards and backwards. - * - * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed, - * the just verify that a kprobe is or is not allowed on the given instruction. - */ - -#define TEST(code) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code) \ - TESTCASE_END - -#define TEST_UNSUPPORTED(code) \ - TESTCASE_START(code) \ - TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \ - TEST_INSTRUCTION(code) \ - TESTCASE_END - -#define TEST_SUPPORTED(code) \ - TESTCASE_START(code) \ - TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \ - TEST_INSTRUCTION(code) \ - TESTCASE_END - -#define TEST_R(code1, reg, val, code2) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg code2) \ - TESTCASE_END - -#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ - TESTCASE_END - -#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ - TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_REG(reg3, val3) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TESTCASE_END - -#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_REG(reg3, val3) \ - TEST_ARG_REG(reg4, val4) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ - TESTCASE_END - -#define TEST_P(code1, reg1, val1, code2) \ - TESTCASE_START(code1 #reg1 code2) \ - TEST_ARG_PTR(reg1, val1) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2) \ - TESTCASE_END - -#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ - TEST_ARG_PTR(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ - TESTCASE_END - -#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_PTR(reg2, val2) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ - TESTCASE_END - -#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ - TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TEST_ARG_PTR(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_REG(reg3, val3) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TESTCASE_END - -#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ - TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_PTR(reg2, val2) \ - TEST_ARG_REG(reg3, val3) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TESTCASE_END - -#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ - TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_PTR(reg3, val3) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ - TESTCASE_END - -#define TEST_BF_P(code1, reg1, val1, code2) \ - TESTCASE_START(code1 #reg1 code2) \ - TEST_ARG_PTR(reg1, val1) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2) \ - TESTCASE_END - -#define TEST_BF(code) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code) \ - TESTCASE_END - -#define TEST_BB(code) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_BRANCH_B(code) \ - TESTCASE_END - -#define TEST_BF_R(code1, reg, val, code2) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg code2) \ - TESTCASE_END - -#define TEST_BB_R(code1, reg, val, code2) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_B(code1 #reg code2) \ - TESTCASE_END - -#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \ - TESTCASE_END - -#define TEST_BF_X(code, codex) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_BRANCH_FX(code, codex) \ - TESTCASE_END - -#define TEST_BB_X(code, codex) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_BRANCH_BX(code, codex) \ - TESTCASE_END - -#define TEST_BF_RX(code1, reg, val, code2, codex) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_FX(code1 #reg code2, codex) \ - TESTCASE_END - -#define TEST_X(code, codex) \ - TESTCASE_START(code) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code) \ - " b 99f \n\t" \ - " "codex" \n\t" \ - TESTCASE_END - -#define TEST_RX(code1, reg, val, code2, codex) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 __stringify(reg) code2) \ - " b 99f \n\t" \ - " "codex" \n\t" \ - TESTCASE_END - -#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \ - TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ - TEST_ARG_REG(reg1, val1) \ - TEST_ARG_REG(reg2, val2) \ - TEST_ARG_END("") \ - TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \ - " b 99f \n\t" \ - " "codex" \n\t" \ - TESTCASE_END - - -/* - * Macros for defining space directives spread over multiple lines. - * These are required so the compiler guesses better the length of inline asm - * code and will spill the literal pool early enough to avoid generating PC - * relative loads with out of range offsets. - */ -#define TWICE(x) x x -#define SPACE_0x8 TWICE(".space 4\n\t") -#define SPACE_0x10 TWICE(SPACE_0x8) -#define SPACE_0x20 TWICE(SPACE_0x10) -#define SPACE_0x40 TWICE(SPACE_0x20) -#define SPACE_0x80 TWICE(SPACE_0x40) -#define SPACE_0x100 TWICE(SPACE_0x80) -#define SPACE_0x200 TWICE(SPACE_0x100) -#define SPACE_0x400 TWICE(SPACE_0x200) -#define SPACE_0x800 TWICE(SPACE_0x400) -#define SPACE_0x1000 TWICE(SPACE_0x800) - - -/* Various values used in test cases... */ -#define N(val) (val ^ 0xffffffff) -#define VAL1 0x12345678 -#define VAL2 N(VAL1) -#define VAL3 0xa5f801 -#define VAL4 N(VAL3) -#define VALM 0x456789ab -#define VALR 0xdeaddead -#define HH1 0x0123fecb -#define HH2 0xa9874567 - - -#ifdef CONFIG_THUMB2_KERNEL -void kprobe_thumb16_test_cases(void); -void kprobe_thumb32_test_cases(void); -#else -void kprobe_arm_test_cases(void); -#endif |