diff options
Diffstat (limited to 'arch/arm/kvm/interrupts_head.S')
| -rw-r--r-- | arch/arm/kvm/interrupts_head.S | 648 |
1 files changed, 0 insertions, 648 deletions
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S deleted file mode 100644 index 51a59504bef4..000000000000 --- a/arch/arm/kvm/interrupts_head.S +++ /dev/null @@ -1,648 +0,0 @@ -#include <linux/irqchip/arm-gic.h> -#include <asm/assembler.h> - -#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) -#define VCPU_USR_SP (VCPU_USR_REG(13)) -#define VCPU_USR_LR (VCPU_USR_REG(14)) -#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4)) - -/* - * Many of these macros need to access the VCPU structure, which is always - * held in r0. These macros should never clobber r1, as it is used to hold the - * exception code on the return path (except of course the macro that switches - * all the registers before the final jump to the VM). - */ -vcpu .req r0 @ vcpu pointer always in r0 - -/* Clobbers {r2-r6} */ -.macro store_vfp_state vfp_base - @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions - VFPFMRX r2, FPEXC - @ Make sure VFP is enabled so we can touch the registers. - orr r6, r2, #FPEXC_EN - VFPFMXR FPEXC, r6 - - VFPFMRX r3, FPSCR - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r4, FPINST - tst r2, #FPEXC_FP2V - VFPFMRX r5, FPINST2, ne @ vmrsne - bic r6, r2, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r6 -1: - VFPFSTMIA \vfp_base, r6 @ Save VFP registers - stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 -.endm - -/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ -.macro restore_vfp_state vfp_base - VFPFLDMIA \vfp_base, r6 @ Load VFP registers - ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r3 - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r4 - tst r2, #FPEXC_FP2V - VFPFMXR FPINST2, r5, ne -1: - VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) -.endm - -/* These are simply for the macros to work - value don't have meaning */ -.equ usr, 0 -.equ svc, 1 -.equ abt, 2 -.equ und, 3 -.equ irq, 4 -.equ fiq, 5 - -.macro push_host_regs_mode mode - mrs r2, SP_\mode - mrs r3, LR_\mode - mrs r4, SPSR_\mode - push {r2, r3, r4} -.endm - -/* - * Store all host persistent registers on the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro save_host_regs - /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ - mrs r2, ELR_hyp - push {r2} - - /* usr regs */ - push {r4-r12} @ r0-r3 are always clobbered - mrs r2, SP_usr - mov r3, lr - push {r2, r3} - - push_host_regs_mode svc - push_host_regs_mode abt - push_host_regs_mode und - push_host_regs_mode irq - - /* fiq regs */ - mrs r2, r8_fiq - mrs r3, r9_fiq - mrs r4, r10_fiq - mrs r5, r11_fiq - mrs r6, r12_fiq - mrs r7, SP_fiq - mrs r8, LR_fiq - mrs r9, SPSR_fiq - push {r2-r9} -.endm - -.macro pop_host_regs_mode mode - pop {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all host registers from the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro restore_host_regs - pop {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - pop_host_regs_mode irq - pop_host_regs_mode und - pop_host_regs_mode abt - pop_host_regs_mode svc - - pop {r2, r3} - msr SP_usr, r2 - mov lr, r3 - pop {r4-r12} - - pop {r2} - msr ELR_hyp, r2 -.endm - -/* - * Restore SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r1, r2, r3, r4. - */ -.macro restore_guest_regs_mode mode, offset - add r1, vcpu, \offset - ldm r1, {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all guest registers from the vcpu struct. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers *all* registers. - */ -.macro restore_guest_regs - restore_guest_regs_mode svc, #VCPU_SVC_REGS - restore_guest_regs_mode abt, #VCPU_ABT_REGS - restore_guest_regs_mode und, #VCPU_UND_REGS - restore_guest_regs_mode irq, #VCPU_IRQ_REGS - - add r1, vcpu, #VCPU_FIQ_REGS - ldm r1, {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - @ Load return state - ldr r2, [vcpu, #VCPU_PC] - ldr r3, [vcpu, #VCPU_CPSR] - msr ELR_hyp, r2 - msr SPSR_cxsf, r3 - - @ Load user registers - ldr r2, [vcpu, #VCPU_USR_SP] - ldr r3, [vcpu, #VCPU_USR_LR] - msr SP_usr, r2 - mov lr, r3 - add vcpu, vcpu, #(VCPU_USR_REGS) - ldm vcpu, {r0-r12} -.endm - -/* - * Save SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs_mode mode, offset - add r2, vcpu, \offset - mrs r3, SP_\mode - mrs r4, LR_\mode - mrs r5, SPSR_\mode - stm r2, {r3, r4, r5} -.endm - -/* - * Save all guest registers to the vcpu struct - * Expects guest's r0, r1, r2 on the stack. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs - @ Store usr registers - add r2, vcpu, #VCPU_USR_REG(3) - stm r2, {r3-r12} - add r2, vcpu, #VCPU_USR_REG(0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3, r4, r5} - mrs r2, SP_usr - mov r3, lr - str r2, [vcpu, #VCPU_USR_SP] - str r3, [vcpu, #VCPU_USR_LR] - - @ Store return state - mrs r2, ELR_hyp - mrs r3, spsr - str r2, [vcpu, #VCPU_PC] - str r3, [vcpu, #VCPU_CPSR] - - @ Store other guest registers - save_guest_regs_mode svc, #VCPU_SVC_REGS - save_guest_regs_mode abt, #VCPU_ABT_REGS - save_guest_regs_mode und, #VCPU_UND_REGS - save_guest_regs_mode irq, #VCPU_IRQ_REGS -.endm - -/* Reads cp15 registers from hardware and stores them in memory - * @store_to_vcpu: If 0, registers are written in-order to the stack, - * otherwise to the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2 - r12 - */ -.macro read_cp15_state store_to_vcpu - mrc p15, 0, r2, c1, c0, 0 @ SCTLR - mrc p15, 0, r3, c1, c0, 2 @ CPACR - mrc p15, 0, r4, c2, c0, 2 @ TTBCR - mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 - mrc p15, 0, r10, c10, c2, 0 @ PRRR - mrc p15, 0, r11, c10, c2, 1 @ NMRR - mrc p15, 2, r12, c0, c0, 0 @ CSSELR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - str r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r2, vcpu, #CP15_OFFSET(c2_TTBR0) - strd r6, r7, [r2] - add r2, vcpu, #CP15_OFFSET(c2_TTBR1) - strd r8, r9, [r2] - str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mrc p15, 0, r2, c13, c0, 1 @ CID - mrc p15, 0, r3, c13, c0, 2 @ TID_URW - mrc p15, 0, r4, c13, c0, 3 @ TID_URO - mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV - mrc p15, 0, r6, c5, c0, 0 @ DFSR - mrc p15, 0, r7, c5, c0, 1 @ IFSR - mrc p15, 0, r8, c5, c1, 0 @ ADFSR - mrc p15, 0, r9, c5, c1, 1 @ AIFSR - mrc p15, 0, r10, c6, c0, 0 @ DFAR - mrc p15, 0, r11, c6, c0, 2 @ IFAR - mrc p15, 0, r12, c12, c0, 0 @ VBAR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c13_CID)] - str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL - mrrc p15, 0, r4, r5, c7 @ PAR - mrc p15, 0, r6, c10, c3, 0 @ AMAIR0 - mrc p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \store_to_vcpu == 0 - push {r2,r4-r7} - .else - str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - strd r4, r5, [r12] - str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif -.endm - -/* - * Reads cp15 registers from memory and writes them to hardware - * @read_from_vcpu: If 0, registers are read in-order from the stack, - * otherwise from the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - */ -.macro write_cp15_state read_from_vcpu - .if \read_from_vcpu == 0 - pop {r2,r4-r7} - .else - ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - ldrd r4, r5, [r12] - ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif - - mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL - mcrr p15, 0, r4, r5, c7 @ PAR - mcr p15, 0, r6, c10, c3, 0 @ AMAIR0 - mcr p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] - ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mcr p15, 0, r2, c13, c0, 1 @ CID - mcr p15, 0, r3, c13, c0, 2 @ TID_URW - mcr p15, 0, r4, c13, c0, 3 @ TID_URO - mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV - mcr p15, 0, r6, c5, c0, 0 @ DFSR - mcr p15, 0, r7, c5, c0, 1 @ IFSR - mcr p15, 0, r8, c5, c1, 0 @ ADFSR - mcr p15, 0, r9, c5, c1, 1 @ AIFSR - mcr p15, 0, r10, c6, c0, 0 @ DFAR - mcr p15, 0, r11, c6, c0, 2 @ IFAR - mcr p15, 0, r12, c12, c0, 0 @ VBAR - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r12, vcpu, #CP15_OFFSET(c2_TTBR0) - ldrd r6, r7, [r12] - add r12, vcpu, #CP15_OFFSET(c2_TTBR1) - ldrd r8, r9, [r12] - ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mcr p15, 0, r2, c1, c0, 0 @ SCTLR - mcr p15, 0, r3, c1, c0, 2 @ CPACR - mcr p15, 0, r4, c2, c0, 2 @ TTBCR - mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 - mcr p15, 0, r10, c10, c2, 0 @ PRRR - mcr p15, 0, r11, c10, c2, 1 @ NMRR - mcr p15, 2, r12, c0, c0, 0 @ CSSELR -.endm - -/* - * Save the VGIC CPU state into memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro save_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* Save all interesting registers */ - ldr r4, [r2, #GICH_VMCR] - ldr r5, [r2, #GICH_MISR] - ldr r6, [r2, #GICH_EISR0] - ldr r7, [r2, #GICH_EISR1] - ldr r8, [r2, #GICH_ELRSR0] - ldr r9, [r2, #GICH_ELRSR1] - ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r5, r5 ) -ARM_BE8(rev r6, r6 ) -ARM_BE8(rev r7, r7 ) -ARM_BE8(rev r8, r8 ) -ARM_BE8(rev r9, r9 ) -ARM_BE8(rev r10, r10 ) - - str r4, [r11, #VGIC_V2_CPU_VMCR] - str r5, [r11, #VGIC_V2_CPU_MISR] -#ifdef CONFIG_CPU_ENDIAN_BE8 - str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r7, [r11, #VGIC_V2_CPU_EISR] - str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] - str r9, [r11, #VGIC_V2_CPU_ELRSR] -#else - str r6, [r11, #VGIC_V2_CPU_EISR] - str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r8, [r11, #VGIC_V2_CPU_ELRSR] - str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] -#endif - str r10, [r11, #VGIC_V2_CPU_APR] - - /* Clear GICH_HCR */ - mov r5, #0 - str r5, [r2, #GICH_HCR] - - /* Save list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r2], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r3], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -/* - * Restore the VGIC CPU state from memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro restore_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_V2_CPU_HCR] - ldr r4, [r11, #VGIC_V2_CPU_VMCR] - ldr r8, [r11, #VGIC_V2_CPU_APR] -ARM_BE8(rev r3, r3 ) -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r8, r8 ) - - str r3, [r2, #GICH_HCR] - str r4, [r2, #GICH_VMCR] - str r8, [r2, #GICH_APR] - - /* Restore list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r3], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r2], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -#define CNTHCTL_PL1PCTEN (1 << 0) -#define CNTHCTL_PL1PCEN (1 << 1) - -/* - * Save the timer state onto the VCPU and allow physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro save_timer_state - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL - str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - - isb - - mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - strd r2, r3, [r5] - - @ Ensure host CNTVCT == CNTPCT - mov r2, #0 - mcrr p15, 4, r2, r2, c14 @ CNTVOFF - -1: - mov r2, #0 @ Clear ENABLE - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL - - @ Allow physical timer/counter access for the host - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -.endm - -/* - * Load the timer state from the VCPU and deny physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro restore_timer_state - @ Disallow physical timer access for the guest - @ Physical counter access is allowed - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #CNTHCTL_PL1PCTEN - bic r2, r2, #CNTHCTL_PL1PCEN - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL - - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - ldr r2, [r4, #KVM_TIMER_CNTVOFF] - ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF - - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - ldrd r2, r3, [r5] - mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - isb - - ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - and r2, r2, #3 - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL -1: -.endm - -.equ vmentry, 0 -.equ vmexit, 1 - -/* Configures the HSTR (Hyp System Trap Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hstr operation - mrc p15, 4, r2, c1, c1, 3 - ldr r3, =HSTR_T(15) - .if \operation == vmentry - orr r2, r2, r3 @ Trap CR{15} - .else - bic r2, r2, r3 @ Don't trap any CRx accesses - .endif - mcr p15, 4, r2, c1, c1, 3 -.endm - -/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return - * (hardware reset value is 0). Keep previous value in r2. - * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if - * VFP wasn't already enabled (always executed on vmtrap). - * If a label is specified with vmexit, it is branched to if VFP wasn't - * enabled. - */ -.macro set_hcptr operation, mask, label = none - mrc p15, 4, r2, c1, c1, 2 - ldr r3, =\mask - .if \operation == vmentry - orr r3, r2, r3 @ Trap coproc-accesses defined in mask - .else - bic r3, r2, r3 @ Don't trap defined coproc-accesses - .endif - mcr p15, 4, r3, c1, c1, 2 - .if \operation != vmentry - .if \operation == vmexit - tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - beq 1f - .endif - isb - .if \label != none - b \label - .endif -1: - .endif -.endm - -/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hdcr operation - mrc p15, 4, r2, c1, c1, 1 - ldr r3, =(HDCR_TPM|HDCR_TPMCR) - .if \operation == vmentry - orr r2, r2, r3 @ Trap some perfmon accesses - .else - bic r2, r2, r3 @ Don't trap any perfmon accesses - .endif - mcr p15, 4, r2, c1, c1, 1 -.endm - -/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ -.macro configure_hyp_role operation - .if \operation == vmentry - ldr r2, [vcpu, #VCPU_HCR] - ldr r3, [vcpu, #VCPU_IRQ_LINES] - orr r2, r2, r3 - .else - mov r2, #0 - .endif - mcr p15, 4, r2, c1, c1, 0 @ HCR -.endm - -.macro load_vcpu - mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR -.endm |