aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-bcm2835/bcm2835.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-bcm2835/bcm2835.c')
-rw-r--r--arch/arm/mach-bcm2835/bcm2835.c32
1 files changed, 30 insertions, 2 deletions
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f0d739f4b7a3..6f5785985dd1 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -17,8 +17,8 @@
#include <linux/irqchip/bcm2835.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/bcm2835_timer.h>
#include <linux/clk/bcm2835.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -26,11 +26,13 @@
#include <mach/bcm2835_soc.h>
#define PM_RSTC 0x1c
+#define PM_RSTS 0x20
#define PM_WDOG 0x24
#define PM_PASSWORD 0x5a000000
#define PM_RSTC_WRCFG_MASK 0x00000030
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTS_HADWRH_SET 0x00000040
static void __iomem *wdt_regs;
@@ -67,6 +69,29 @@ static void bcm2835_restart(char mode, const char *cmd)
mdelay(1);
}
+/*
+ * We can't really power off, but if we do the normal reset scheme, and
+ * indicate to bootcode.bin not to reboot, then most of the chip will be
+ * powered off.
+ */
+static void bcm2835_power_off(void)
+{
+ u32 val;
+
+ /*
+ * We set the watchdog hard reset bit here to distinguish this reset
+ * from the normal (full) reset. bootcode.bin will not reboot after a
+ * hard reset.
+ */
+ val = readl_relaxed(wdt_regs + PM_RSTS);
+ val &= ~PM_RSTC_WRCFG_MASK;
+ val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
+ writel_relaxed(val, wdt_regs + PM_RSTS);
+
+ /* Continue with normal reset mechanism */
+ bcm2835_restart(0, "");
+}
+
static struct map_desc io_map __initdata = {
.virtual = BCM2835_PERIPH_VIRT,
.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
@@ -84,6 +109,9 @@ static void __init bcm2835_init(void)
int ret;
bcm2835_setup_restart();
+ if (wdt_regs)
+ pm_power_off = bcm2835_power_off;
+
bcm2835_init_clocks();
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
@@ -104,7 +132,7 @@ DT_MACHINE_START(BCM2835, "BCM2835")
.init_irq = bcm2835_init_irq,
.handle_irq = bcm2835_handle_irq,
.init_machine = bcm2835_init,
- .timer = &bcm2835_timer,
+ .init_time = clocksource_of_init,
.restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END