diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-bcm/Kconfig | 34 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/Makefile | 8 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/board_bcm21664.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/board_bcm281xx.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/brcmstb.c | 28 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/brcmstb.h | 19 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/headsmp-brcmstb.S | 33 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/kona_smp.c | 202 | ||||
| -rw-r--r-- | arch/arm/mach-bcm/platsmp-brcmstb.c | 363 |
9 files changed, 686 insertions, 7 deletions
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 41c839167e87..fc938005ad39 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -9,7 +9,6 @@ config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC select GPIO_BCM_KONA @@ -26,16 +25,18 @@ menu "Broadcom Mobile SoC Selection" config ARCH_BCM_281XX bool "Broadcom BCM281XX SoC family" default y + select HAVE_SMP help - Enable support for the the BCM281XX family, which includes + Enable support for the BCM281XX family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. config ARCH_BCM_21664 bool "Broadcom BCM21664 SoC family" default y + select HAVE_SMP help - Enable support for the the BCM21664 family, which includes + Enable support for the BCM21664 family, which includes BCM21663 and BCM21664 variants. config ARCH_BCM_MOBILE_L2_CACHE @@ -49,6 +50,17 @@ config ARCH_BCM_MOBILE_SMC bool depends on ARCH_BCM_281XX || ARCH_BCM_21664 +config ARCH_BCM_MOBILE_SMP + bool "Broadcom mobile SoC SMP support" + depends on (ARCH_BCM_281XX || ARCH_BCM_21664) && SMP + default y + select HAVE_ARM_SCU + select ARM_ERRATA_764369 + help + SMP support for the BCM281XX and BCM21664 SoC families. + Provided as an option so SMP support for SoCs of this type + can be disabled for an SMP-enabled kernel. + endmenu endif @@ -87,4 +99,20 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx +config ARCH_BRCMSTB + bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 + depends on MMU + select ARM_GIC + select MIGHT_HAVE_PCI + select HAVE_SMP + select HAVE_ARM_ARCH_TIMER + select BRCMSTB_GISB_ARB + select BRCMSTB_L2_IRQ + help + Say Y if you intend to run the kernel on a Broadcom ARM-based STB + chipset. + + This enables support for Broadcom ARM-based set-top box chipsets, + including the 7445 family of chips. + endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 731292114975..67c492aabf4d 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -16,6 +16,9 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o # BCM21664 obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o +# BCM281XX and BCM21664 SMP support +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o + # BCM281XX and BCM21664 L2 cache control obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o @@ -30,3 +33,8 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o + +ifeq ($(CONFIG_ARCH_BRCMSTB),y) +obj-y += brcmstb.o +obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o +endif diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index f0521cc0640d..82ad5687771f 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -60,8 +60,7 @@ static void bcm21664_restart(enum reboot_mode mode, const char *cmd) static void __init bcm21664_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, - &platform_bus); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 1ac59fc0cb15..2e367bd7c600 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -58,8 +58,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) static void __init bcm281xx_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, - &platform_bus); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c new file mode 100644 index 000000000000..60a5afa06ed7 --- /dev/null +++ b/arch/arm/mach-bcm/brcmstb.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static const char *brcmstb_match[] __initconst = { + "brcm,bcm7445", + "brcm,brcmstb", + NULL +}; + +DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)") + .dt_compat = brcmstb_match, +MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h new file mode 100644 index 000000000000..ec0c3d112b36 --- /dev/null +++ b/arch/arm/mach-bcm/brcmstb.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_H__ +#define __BRCMSTB_H__ + +void brcmstb_secondary_startup(void); + +#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S new file mode 100644 index 000000000000..199c1ea58248 --- /dev/null +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S @@ -0,0 +1,33 @@ +/* + * SMP boot code for secondary CPUs + * Based on arch/arm/mach-tegra/headsmp.S + * + * Copyright (C) 2010 NVIDIA, Inc. + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/assembler.h> +#include <linux/linkage.h> +#include <linux/init.h> + + .section ".text.head", "ax" + +ENTRY(brcmstb_secondary_startup) + /* + * Ensure CPU is in a sane state by disabling all IRQs and switching + * into SVC mode. + */ + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 + + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/kona_smp.c new file mode 100644 index 000000000000..66a0465528a5 --- /dev/null +++ b/arch/arm/mach-bcm/kona_smp.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * Copyright 2014 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/sched.h> + +#include <asm/smp.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +/* Size of mapped Cortex A9 SCU address space */ +#define CORTEX_A9_SCU_SIZE 0x58 + +#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */ +#define BOOT_ADDR_CPUID_MASK 0x3 + +/* Name of device node property defining secondary boot register location */ +#define OF_SECONDARY_BOOT "secondary-boot-reg" + +/* I/O address of register used to coordinate secondary core startup */ +static u32 secondary_boot; + +/* + * Enable the Cortex A9 Snoop Control Unit + * + * By the time this is called we already know there are multiple + * cores present. We assume we're running on a Cortex A9 processor, + * so any trouble getting the base address register or getting the + * SCU base is a problem. + * + * Return 0 if successful or an error code otherwise. + */ +static int __init scu_a9_enable(void) +{ + unsigned long config_base; + void __iomem *scu_base; + + if (!scu_a9_has_base()) { + pr_err("no configuration base address register!\n"); + return -ENXIO; + } + + /* Config base address register value is zero for uniprocessor */ + config_base = scu_a9_get_base(); + if (!config_base) { + pr_err("hardware reports only one core\n"); + return -ENOENT; + } + + scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE); + if (!scu_base) { + pr_err("failed to remap config base (%lu/%u) for SCU\n", + config_base, CORTEX_A9_SCU_SIZE); + return -ENOMEM; + } + + scu_enable(scu_base); + + iounmap(scu_base); /* That's the last we'll need of this */ + + return 0; +} + +static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) +{ + static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; + struct device_node *node; + int ret; + + BUG_ON(secondary_boot); /* We're called only once */ + + /* + * This function is only called via smp_ops->smp_prepare_cpu(). + * That only happens if a "/cpus" device tree node exists + * and has an "enable-method" property that selects the SMP + * operations defined herein. + */ + node = of_find_node_by_path("/cpus"); + BUG_ON(!node); + + /* + * Our secondary enable method requires a "secondary-boot-reg" + * property to specify a register address used to request the + * ROM code boot a secondary code. If we have any trouble + * getting this we fall back to uniprocessor mode. + */ + if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) { + pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n", + node->name); + ret = -ENOENT; /* Arrange to disable SMP */ + goto out; + } + + /* + * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is + * returned, the SoC reported a uniprocessor configuration. + * We bail on any other error. + */ + ret = scu_a9_enable(); +out: + of_node_put(node); + if (ret) { + /* Update the CPU present map to reflect uniprocessor mode */ + BUG_ON(ret != -ENOENT); + pr_warn("disabling SMP\n"); + init_cpu_present(&only_cpu_0); + } +} + +/* + * The ROM code has the secondary cores looping, waiting for an event. + * When an event occurs each core examines the bottom two bits of the + * secondary boot register. When a core finds those bits contain its + * own core id, it performs initialization, including computing its boot + * address by clearing the boot register value's bottom two bits. The + * core signals that it is beginning its execution by writing its boot + * address back to the secondary boot register, and finally jumps to + * that address. + * + * So to start a core executing we need to: + * - Encode the (hardware) CPU id with the bottom bits of the secondary + * start address. + * - Write that value into the secondary boot register. + * - Generate an event to wake up the secondary CPU(s). + * - Wait for the secondary boot register to be re-written, which + * indicates the secondary core has started. + */ +static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *boot_reg; + phys_addr_t boot_func; + u64 start_clock; + u32 cpu_id; + u32 boot_val; + bool timeout = false; + + cpu_id = cpu_logical_map(cpu); + if (cpu_id & ~BOOT_ADDR_CPUID_MASK) { + pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK); + return -EINVAL; + } + + if (!secondary_boot) { + pr_err("required secondary boot register not specified\n"); + return -EINVAL; + } + + boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32)); + if (!boot_reg) { + pr_err("unable to map boot register for cpu %u\n", cpu_id); + return -ENOSYS; + } + + /* + * Secondary cores will start in secondary_startup(), + * defined in "arch/arm/kernel/head.S" + */ + boot_func = virt_to_phys(secondary_startup); + BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK); + BUG_ON(boot_func > (phys_addr_t)U32_MAX); + + /* The core to start is encoded in the low bits */ + boot_val = (u32)boot_func | cpu_id; + writel_relaxed(boot_val, boot_reg); + + sev(); + + /* The low bits will be cleared once the core has started */ + start_clock = local_clock(); + while (!timeout && readl_relaxed(boot_reg) == boot_val) + timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS; + + iounmap(boot_reg); + + if (!timeout) + return 0; + + pr_err("timeout waiting for cpu %u to start\n", cpu_id); + + return -ENOSYS; +} + +static struct smp_operations bcm_smp_ops __initdata = { + .smp_prepare_cpus = bcm_smp_prepare_cpus, + .smp_boot_secondary = bcm_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", + &bcm_smp_ops); diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c new file mode 100644 index 000000000000..af780e9c23a6 --- /dev/null +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -0,0 +1,363 @@ +/* + * Broadcom STB CPU SMP and hotplug support for ARM + * + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/printk.h> +#include <linux/regmap.h> +#include <linux/smp.h> +#include <linux/mfd/syscon.h> +#include <linux/spinlock.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/mach-types.h> +#include <asm/smp_plat.h> + +#include "brcmstb.h" + +enum { + ZONE_MAN_CLKEN_MASK = BIT(0), + ZONE_MAN_RESET_CNTL_MASK = BIT(1), + ZONE_MAN_MEM_PWR_MASK = BIT(4), + ZONE_RESERVED_1_MASK = BIT(5), + ZONE_MAN_ISO_CNTL_MASK = BIT(6), + ZONE_MANUAL_CONTROL_MASK = BIT(7), + ZONE_PWR_DN_REQ_MASK = BIT(9), + ZONE_PWR_UP_REQ_MASK = BIT(10), + ZONE_BLK_RST_ASSERT_MASK = BIT(12), + ZONE_PWR_OFF_STATE_MASK = BIT(25), + ZONE_PWR_ON_STATE_MASK = BIT(26), + ZONE_DPG_PWR_STATE_MASK = BIT(28), + ZONE_MEM_PWR_STATE_MASK = BIT(29), + ZONE_RESET_STATE_MASK = BIT(31), + CPU0_PWR_ZONE_CTRL_REG = 1, + CPU_RESET_CONFIG_REG = 2, +}; + +static void __iomem *cpubiuctrl_block; +static void __iomem *hif_cont_block; +static u32 cpu0_pwr_zone_ctrl_reg; +static u32 cpu_rst_cfg_reg; +static u32 hif_cont_reg; + +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); + +static int per_cpu_sw_state_rd(u32 cpu) +{ + sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); + return per_cpu(per_cpu_sw_state, cpu); +} + +static void per_cpu_sw_state_wr(u32 cpu, int val) +{ + per_cpu(per_cpu_sw_state, cpu) = val; + dmb(); + sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); + dsb_sev(); +} +#else +static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } +#endif + +static void __iomem *pwr_ctrl_get_base(u32 cpu) +{ + void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; + base += (cpu_logical_map(cpu) * 4); + return base; +} + +static u32 pwr_ctrl_rd(u32 cpu) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + return readl_relaxed(base); +} + +static void pwr_ctrl_wr(u32 cpu, u32 val) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + writel(val, base); +} + +static void cpu_rst_cfg_set(u32 cpu, int set) +{ + u32 val; + val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); + if (set) + val |= BIT(cpu_logical_map(cpu)); + else + val &= ~BIT(cpu_logical_map(cpu)); + writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); +} + +static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) +{ + const int reg_ofs = cpu_logical_map(cpu) * 8; + writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); + writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); +} + +static void brcmstb_cpu_boot(u32 cpu) +{ + pr_info("SMP: Booting CPU%d...\n", cpu); + + /* + * set the reset vector to point to the secondary_startup + * routine + */ + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + + /* unhalt the cpu */ + cpu_rst_cfg_set(cpu, 0); +} + +static void brcmstb_cpu_power_on(u32 cpu) +{ + /* + * The secondary cores power was cut, so we must go through + * power-on initialization. + */ + u32 tmp; + + pr_info("SMP: Powering up CPU%d...\n", cpu); + + /* Request zone power up */ + pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); + + /* Wait for the power up FSM to complete */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); + + per_cpu_sw_state_wr(cpu, 1); +} + +static int brcmstb_cpu_get_power_state(u32 cpu) +{ + int tmp = pwr_ctrl_rd(cpu); + return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; +} + +#ifdef CONFIG_HOTPLUG_CPU + +static void brcmstb_cpu_die(u32 cpu) +{ + v7_exit_coherency_flush(all); + + /* Prevent all interrupts from reaching this CPU. */ + arch_local_irq_disable(); + + /* + * Final full barrier to ensure everything before this instruction has + * quiesced. + */ + isb(); + dsb(); + + per_cpu_sw_state_wr(cpu, 0); + + /* Sit and wait to die */ + wfi(); + + /* We should never get here... */ + panic("Spurious interrupt on CPU %d received!\n", cpu); +} + +static int brcmstb_cpu_kill(u32 cpu) +{ + u32 tmp; + + pr_info("SMP: Powering down CPU%d...\n", cpu); + + while (per_cpu_sw_state_rd(cpu)) + ; + + /* Program zone reset */ + pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | + ZONE_PWR_DN_REQ_MASK); + + /* Verify zone reset */ + tmp = pwr_ctrl_rd(cpu); + if (!(tmp & ZONE_RESET_STATE_MASK)) + pr_err("%s: Zone reset bit for CPU %d not asserted!\n", + __func__, cpu); + + /* Wait for power down */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); + + /* Settle-time from Broadcom-internal DVT reference code */ + udelay(7); + + /* Assert reset on the CPU */ + cpu_rst_cfg_set(cpu, 1); + + return 1; +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +static int __init setup_hifcpubiuctrl_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cpu"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + cpubiuctrl_block = of_iomap(syscon_np, 0); + if (!cpubiuctrl_block) { + pr_err("iomap failed for cpubiuctrl_block\n"); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, + &cpu0_pwr_zone_ctrl_reg); + if (rc) { + pr_err("failed to read 1st entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, + &cpu_rst_cfg_reg); + if (rc) { + pr_err("failed to read 2nd entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + +cleanup: + if (syscon_np) + of_node_put(syscon_np); + + return rc; +} + +static int __init setup_hifcont_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cont"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + hif_cont_block = of_iomap(syscon_np, 0); + if (!hif_cont_block) { + pr_err("iomap failed for hif_cont_block\n"); + rc = -EINVAL; + goto cleanup; + } + + /* offset is at top of hif_cont_block */ + hif_cont_reg = 0; + +cleanup: + if (syscon_np) + of_node_put(syscon_np); + + return rc; +} + +static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) +{ + int rc; + struct device_node *np; + char *name; + + name = "brcm,brcmstb-smpboot"; + np = of_find_compatible_node(NULL, NULL, name); + if (!np) { + pr_err("can't find compatible node %s\n", name); + return; + } + + rc = setup_hifcpubiuctrl_regs(np); + if (rc) + return; + + rc = setup_hifcont_regs(np); + if (rc) + return; +} + +static DEFINE_SPINLOCK(boot_lock); + +static void brcmstb_secondary_init(unsigned int cpu) +{ + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* Bring up power to the core if necessary */ + if (brcmstb_cpu_get_power_state(cpu) == 0) + brcmstb_cpu_power_on(cpu); + + brcmstb_cpu_boot(cpu); + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +static struct smp_operations brcmstb_smp_ops __initdata = { + .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, + .smp_secondary_init = brcmstb_secondary_init, + .smp_boot_secondary = brcmstb_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = brcmstb_cpu_kill, + .cpu_die = brcmstb_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); |