diff options
Diffstat (limited to 'arch/arm/mach-clps711x')
| -rw-r--r-- | arch/arm/mach-clps711x/Kconfig | 21 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/common.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/clps711x.h | 278 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/debug-macro.S | 5 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/entry-macro.S | 3 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/hardware.h | 59 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/irqs.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/time.h | 49 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/uncompress.h | 21 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/p720t-leds.c | 3 |
10 files changed, 311 insertions, 150 deletions
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index eb34bd1251d4..ea036d621581 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -1,6 +1,6 @@ if ARCH_CLPS711X -menu "CLPS711X/EP721X Implementations" +menu "CLPS711X/EP721X/EP731X Implementations" config ARCH_AUTCPU12 bool "AUTCPU12" @@ -45,26 +45,13 @@ config ARCH_P720T config ARCH_FORTUNET bool "FORTUNET" -# XXX Maybe these should indicate register compatibility -# instead of being mutually exclusive. -config ARCH_EP7211 - bool - depends on ARCH_EDB7211 - default y - -config ARCH_EP7212 - bool - depends on ARCH_P720T || ARCH_CEIVA - default y - config EP72XX_ROM_BOOT - bool "EP72xx ROM boot" - depends on ARCH_EP7211 || ARCH_EP7212 - ---help--- + bool "EP721x/EP731x ROM boot" + help If you say Y here, your CLPS711x-based kernel will use the bootstrap mode memory map instead of the normal memory map. - Processors derived from the Cirrus CLPS-711X core support two boot + Processors derived from the Cirrus CLPS711X core support two boot modes. Normal mode boots from the external memory device at CS0. Bootstrap mode rearranges parts of the memory map, placing an internal 128 byte bootstrap ROM at CS0. This option performs the diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 3c5b5bbf24e5..c965fd8eb31a 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -36,7 +36,6 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/clps7111.h> #include <asm/system_misc.h> /* @@ -44,8 +43,8 @@ */ static struct map_desc clps711x_io_desc[] __initdata = { { - .virtual = CLPS7111_VIRT_BASE, - .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), + .virtual = (unsigned long)CLPS711X_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), .length = SZ_1M, .type = MT_DEVICE } @@ -67,12 +66,6 @@ static void int1_mask(struct irq_data *d) static void int1_ack(struct irq_data *d) { - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 &= ~(1 << d->irq); - clps_writel(intmr1, INTMR1); - switch (d->irq) { case IRQ_CSINT: clps_writel(0, COEOI); break; case IRQ_TC1OI: clps_writel(0, TC1EOI); break; @@ -109,12 +102,6 @@ static void int2_mask(struct irq_data *d) static void int2_ack(struct irq_data *d) { - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 &= ~(1 << (d->irq - 16)); - clps_writel(intmr2, INTMR2); - switch (d->irq) { case IRQ_KBDINT: clps_writel(0, KBDEOI); break; } diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h new file mode 100644 index 000000000000..1dd806f2847e --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -0,0 +1,278 @@ +/* + * This file contains the hardware definitions of the Cirrus Logic + * ARM7 CLPS711X internal registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_CLPS711X_H +#define __MACH_CLPS711X_H + +#define CLPS711X_PHYS_BASE (0x80000000) + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PCDR (0x0002) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PCDDR (0x0042) +#define PDDDR (0x0043) +#define PEDR (0x0080) +#define PEDDR (0x00c0) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define INTSR1 (0x0240) +#define INTMR1 (0x0280) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define BLEOI (0x0600) +#define MCEOI (0x0640) +#define TEOI (0x0680) +#define TC1EOI (0x06c0) +#define TC2EOI (0x0700) +#define RTCEOI (0x0740) +#define UMSEOI (0x0780) +#define COEOI (0x07c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define INTSR2 (0x1240) +#define INTMR2 (0x1280) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SRXEOF (0x1600) +#define SS2POP (0x16c0) +#define KBDEOI (0x1700) + +#define DAIR (0x2000) +#define DAIR0 (0x2040) +#define DAIDR1 (0x2080) +#define DAIDR2 (0x20c0) +#define DAISR (0x2100) +#define SYSCON3 (0x2200) +#define INTSR3 (0x2240) +#define INTMR3 (0x2280) +#define LEDFLSH (0x22c0) +#define SDCONF (0x2300) +#define SDRFPR (0x2340) +#define UNIQID (0x2440) +#define DAI64FS (0x2600) +#define PLLW (0x2610) +#define PLLR (0xa5a8) +#define RANDID0 (0x2700) +#define RANDID1 (0x2704) +#define RANDID2 (0x2708) +#define RANDID3 (0x270c) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) +#define SYSFLG1_VERID(x) (((x) >> 30) & 3) +#define SYSFLG1_VERID_MASK (3 << 30) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_FRMLEN(x) (((x) & 0x3f) << 7) +#define SYNCIO_CFGLEN(x) ((x) & 0x7f) +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#define DAIR_RESERVED (0x0404) +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define DAI64FS_I2SF64 (1 << 0) +#define DAI64FS_AUDIOCLKEN (1 << 1) +#define DAI64FS_AUDIOCLKSRC (1 << 2) +#define DAI64FS_MCLK256EN (1 << 3) +#define DAI64FS_LOOPBACK (1 << 5) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_CLKCTL0 (1 << 1) +#define SYSCON3_CLKCTL1 (1 << 2) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_VERSN(x) (((x) >> 5) & 7) +#define SYSCON3_VERSN_MASK (7 << 5) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) +#define SYSCON3_128FS SYSCON3_DAIEN +#define SYSCON3_ENPD67 (1 << 10) + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#define MEMCFG_BUS_WIDTH_32 (1) +#define MEMCFG_BUS_WIDTH_16 (0) +#define MEMCFG_BUS_WIDTH_8 (3) + +#define MEMCFG_WAITSTATE_8_3 (0 << 2) +#define MEMCFG_WAITSTATE_7_3 (1 << 2) +#define MEMCFG_WAITSTATE_6_3 (2 << 2) +#define MEMCFG_WAITSTATE_5_3 (3 << 2) +#define MEMCFG_WAITSTATE_4_2 (4 << 2) +#define MEMCFG_WAITSTATE_3_2 (5 << 2) +#define MEMCFG_WAITSTATE_2_2 (6 << 2) +#define MEMCFG_WAITSTATE_1_2 (7 << 2) +#define MEMCFG_WAITSTATE_8_1 (8 << 2) +#define MEMCFG_WAITSTATE_7_1 (9 << 2) +#define MEMCFG_WAITSTATE_6_1 (10 << 2) +#define MEMCFG_WAITSTATE_5_1 (11 << 2) +#define MEMCFG_WAITSTATE_4_0 (12 << 2) +#define MEMCFG_WAITSTATE_3_0 (13 << 2) +#define MEMCFG_WAITSTATE_2_0 (14 << 2) +#define MEMCFG_WAITSTATE_1_0 (15 << 2) + +#endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index b802e8a51831..118b3d930573 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -12,7 +12,6 @@ */ #include <mach/hardware.h> -#include <asm/hardware/clps7111.h> .macro addruart, rp, rv, tmp #ifndef CONFIG_DEBUG_CLPS711X_UART2 @@ -20,8 +19,8 @@ #else mov \rp, #0x1000 @ UART2 #endif - orr \rv, \rp, #CLPS7111_VIRT_BASE - orr \rp, \rp, #CLPS7111_PHYS_BASE + orr \rv, \rp, #CLPS711X_VIRT_BASE + orr \rp, \rp, #CLPS711X_PHYS_BASE .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S index 125af59d7a29..56e5c2c23504 100644 --- a/arch/arm/mach-clps711x/include/mach/entry-macro.S +++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> -#include <asm/hardware/clps7111.h> .macro get_irqnr_preamble, base, tmp .endm @@ -18,7 +17,7 @@ #endif .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS7111_BASE + mov \base, #CLPS711X_VIRT_BASE ldr \stat, [\base, #INTSR1] ldr \mask, [\base, #INTMR1] mov \irqnr, #4 diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index d0b7d870be9c..13a64fcd7dd1 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -19,12 +19,21 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H +#include <mach/clps711x.h> -#define CLPS7111_VIRT_BASE 0xff000000 -#define CLPS7111_BASE CLPS7111_VIRT_BASE +#define CLPS711X_VIRT_BASE IOMEM(0xff000000) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) +#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off)) +#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off)) +#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) +#endif /* * The physical addresses that the external chip select signals map to is @@ -52,46 +61,11 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#if defined (CONFIG_ARCH_EP7211) - -#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7211_BASE CLPS7111_VIRT_BASE -#include <asm/hardware/ep7211.h> - -#elif defined (CONFIG_ARCH_EP7212) - -#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7212_BASE CLPS7111_VIRT_BASE -#include <asm/hardware/ep7212.h> - -#endif - #define SYSPLD_VIRT_BASE 0xfe000000 #define SYSPLD_BASE SYSPLD_VIRT_BASE -#if defined (CONFIG_ARCH_AUTCPU12) - -#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE -#define CS89712_BASE CLPS7111_VIRT_BASE - -#include <asm/hardware/clps7111.h> -#include <asm/hardware/ep7212.h> -#include <asm/hardware/cs89712.h> - -#endif - - #if defined (CONFIG_ARCH_CDB89712) -#include <asm/hardware/clps7111.h> -#include <asm/hardware/ep7212.h> -#include <asm/hardware/cs89712.h> - -/* static cdb89712_map_io() areas */ -#define REGISTER_START 0x80000000 -#define REGISTER_SIZE 0x4000 -#define REGISTER_BASE 0xff000000 - #define ETHER_START 0x20000000 #define ETHER_SIZE 0x1000 #define ETHER_BASE 0xfe000000 @@ -154,13 +128,6 @@ #if defined (CONFIG_ARCH_CEIVA) -#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE -#define CEIVA_BASE CLPS7111_VIRT_BASE - -#include <asm/hardware/clps7111.h> -#include <asm/hardware/ep7212.h> - - /* * The two flash banks are wired to chip selects 0 and 1. This is the mapping * for them. diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h index 30b7e97285a4..14d215f8ca81 100644 --- a/arch/arm/mach-clps711x/include/mach/irqs.h +++ b/arch/arm/mach-clps711x/include/mach/irqs.h @@ -35,7 +35,6 @@ #define IRQ_SSEOTI 15 #define INT1_IRQS (0x0000fff0) -#define INT1_ACK_IRQS (0x00004f10) /* * Interrupts from INTSR2 @@ -47,7 +46,5 @@ #define IRQ_URXINT2 (16+13) /* bit 13 */ #define INT2_IRQS (0x30070000) -#define INT2_ACK_IRQS (0x00010000) - -#define NR_IRQS 30 +#define NR_IRQS 30 diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h deleted file mode 100644 index 61fef9129c6a..000000000000 --- a/arch/arm/mach-clps711x/include/mach/time.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/time.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <asm/leds.h> -#include <asm/hardware/clps7111.h> - -extern void clps711x_setup_timer(void); - -/* - * IRQ handler for the timer - */ -static irqreturn_t -p720t_timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_leds(); - xtime_update(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - clps711x_setup_timer(); - timer_irq.handler = p720t_timer_interrupt; - setup_irq(IRQ_TC2OI, &timer_irq); -} diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h index 35ed731b9f16..7b28d6a47690 100644 --- a/arch/arm/mach-clps711x/include/mach/uncompress.h +++ b/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -17,14 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <mach/hardware.h> -#include <asm/hardware/clps7111.h> - -#undef CLPS7111_BASE -#define CLPS7111_BASE CLPS7111_PHYS_BASE - -#define __raw_readl(p) (*(unsigned long *)(p)) -#define __raw_writel(v,p) (*(unsigned long *)(p) = (v)) +#include <mach/clps711x.h> #ifdef CONFIG_DEBUG_CLPS711X_UART2 #define SYSFLGx SYSFLG2 @@ -34,19 +27,25 @@ #define UARTDRx UARTDR1 #endif +#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x))) + /* + * The following code assumes the serial port has already been + * initialized by the bootloader. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * * This does not append a newline */ static inline void putc(int c) { - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) + while (phys_reg(SYSFLGx) & SYSFLG_UTXFF) barrier(); - clps_writel(c, UARTDRx); + phys_reg(UARTDRx) = c; } static inline void flush(void) { - while (clps_readl(SYSFLGx) & SYSFLG_UBUSY) + while (phys_reg(SYSFLGx) & SYSFLG_UBUSY) barrier(); } diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c index dd9a6cdbeb02..bbc449fbe14a 100644 --- a/arch/arm/mach-clps711x/p720t-leds.c +++ b/arch/arm/mach-clps711x/p720t-leds.c @@ -27,9 +27,6 @@ #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/hardware/clps7111.h> -#include <asm/hardware/ep7212.h> - static void p720t_leds_event(led_event_t ledevt) { unsigned long flags; |