diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-da830-evm.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-da830-evm.c | 52 |
1 files changed, 28 insertions, 24 deletions
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index dc19870b23cd..212d97084bd7 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -33,9 +33,6 @@ #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 -#define DA830_EMIF25_CONTROL_BASE 0x68000000 - /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -157,7 +154,7 @@ static __init void da830_evm_usb_init(void) __func__, ret); } - ret = da8xx_pinmux_setup(da830_evm_usb11_pins); + ret = davinci_cfg_reg_list(da830_evm_usb11_pins); if (ret) { pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); @@ -229,15 +226,22 @@ static const short da830_evm_mmc_sd_pins[] = { }; #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) static int da830_evm_mmc_get_ro(int index) { return gpio_get_value(DA830_MMCSD_WP_PIN); } +static int da830_evm_mmc_get_cd(int index) +{ + return !gpio_get_value(DA830_MMCSD_CD_PIN); +} + static struct davinci_mmc_config da830_evm_mmc_config = { .get_ro = da830_evm_mmc_get_ro, - .wires = 4, + .get_cd = da830_evm_mmc_get_cd, + .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .version = MMC_CTLR_VERSION_2, @@ -247,7 +251,7 @@ static inline void da830_evm_init_mmc(void) { int ret; - ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins); + ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins); if (ret) { pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", ret); @@ -262,6 +266,14 @@ static inline void da830_evm_init_mmc(void) } gpio_direction_input(DA830_MMCSD_WP_PIN); + ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_CD_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_CD_PIN); + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", @@ -360,13 +372,13 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { static struct resource da830_evm_nand_resources[] = { [0] = { /* First memory resource is NAND I/O window */ - .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, - .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { /* Second memory resource is AEMIF control registers */ - .start = DA830_EMIF25_CONTROL_BASE, - .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, }; @@ -392,7 +404,7 @@ static inline void da830_evm_init_nand(int mux_mode) return; } - ret = da8xx_pinmux_setup(da830_evm_emif25_pins); + ret = davinci_cfg_reg_list(da830_evm_emif25_pins); if (ret) pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", ret); @@ -412,7 +424,7 @@ static inline void da830_evm_init_lcdc(int mux_mode) { int ret; - ret = da8xx_pinmux_setup(da830_lcdcntl_pins); + ret = davinci_cfg_reg_list(da830_lcdcntl_pins); if (ret) pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", ret); @@ -492,7 +504,7 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: edma registration failed: %d\n", ret); - ret = da8xx_pinmux_setup(da830_i2c0_pins); + ret = davinci_cfg_reg_list(da830_i2c0_pins); if (ret) pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n", ret); @@ -508,7 +520,7 @@ static __init void da830_evm_init(void) soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; - ret = da8xx_pinmux_setup(da830_cpgmac_pins); + ret = davinci_cfg_reg_list(da830_cpgmac_pins); if (ret) pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n", ret); @@ -527,7 +539,7 @@ static __init void da830_evm_init(void) i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); - ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins); + ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins); if (ret) pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", ret); @@ -549,14 +561,6 @@ static int __init da830_evm_console_init(void) console_initcall(da830_evm_console_init); #endif -static __init void da830_evm_irq_init(void) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ, - soc_info->intc_irq_prios); -} - static void __init da830_evm_map_io(void) { da830_init(); @@ -567,7 +571,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da830_evm_map_io, - .init_irq = da830_evm_irq_init, + .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = da830_evm_init, MACHINE_END |