diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-dm646x-evm.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-dm646x-evm.c | 876 |
1 files changed, 0 insertions, 876 deletions
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c deleted file mode 100644 index ee91d81ebbfd..000000000000 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ /dev/null @@ -1,876 +0,0 @@ -/* - * TI DaVinci DM646X EVM board - * - * Derived from: arch/arm/mach-davinci/board-evm.c - * Copyright (C) 2006 Texas Instruments. - * - * (C) 2007-2008, MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -/************************************************************************** - * Included Files - **************************************************************************/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/property.h> -#include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/ti-aemif.h> - -#include <media/i2c/tvp514x.h> -#include <media/i2c/adv7343.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> -#include <linux/nvmem-provider.h> -#include <linux/clk.h> -#include <linux/export.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/common.h> -#include <mach/serial.h> - -#include "davinci.h" -#include "irqs.h" - -#define NAND_BLOCK_SIZE SZ_128K - -/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot - * and U-Boot environment this avoids dependency on any particular combination - * of UBL, U-Boot or flashing tools etc. - */ -static struct mtd_partition davinci_nand_partitions[] = { - { - /* UBL, U-Boot with environment */ - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 16 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } -}; - -static struct davinci_aemif_timing dm6467tevm_nandflash_timing = { - .wsetup = 29, - .wstrobe = 24, - .whold = 14, - .rsetup = 19, - .rstrobe = 33, - .rhold = 0, - .ta = 29, -}; - -static struct davinci_nand_pdata davinci_nand_data = { - .core_chipsel = 0, - .mask_cle = 0x80000, - .mask_ale = 0x40000, - .parts = davinci_nand_partitions, - .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 1, - .options = 0, -}; - -static struct resource davinci_nand_resources[] = { - { - .start = DM646X_ASYNC_EMIF_CS2_SPACE_BASE, - .end = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM646X_ASYNC_EMIF_CONTROL_BASE, - .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 0, - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - .dev = { - .platform_data = &davinci_nand_data, - }, - }, -}; - -static struct resource davinci_aemif_resources[] = { - { - .start = DM646X_ASYNC_EMIF_CONTROL_BASE, - .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data davinci_aemif_abus_data[] = { - { - .cs = 1, - }, -}; - -static struct aemif_platform_data davinci_aemif_pdata = { - .abus_data = davinci_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data), - .sub_devices = davinci_aemif_devices, - .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), -}; - -static struct platform_device davinci_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &davinci_aemif_pdata, - }, - .resource = davinci_aemif_resources, - .num_resources = ARRAY_SIZE(davinci_aemif_resources), -}; - -#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - IS_ENABLED(CONFIG_PATA_BK3710)) - -#ifdef CONFIG_I2C -/* CPLD Register 0 bits to control ATA */ -#define DM646X_EVM_ATA_RST BIT(0) -#define DM646X_EVM_ATA_PWD BIT(1) - -/* CPLD Register 0 Client: used for I/O Control */ -static int cpld_reg0_probe(struct i2c_client *client) -{ - if (HAS_ATA) { - u8 data; - struct i2c_msg msg[2] = { - { - .addr = client->addr, - .flags = I2C_M_RD, - .len = 1, - .buf = &data, - }, - { - .addr = client->addr, - .flags = 0, - .len = 1, - .buf = &data, - }, - }; - - /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */ - i2c_transfer(client->adapter, msg, 1); - data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD); - i2c_transfer(client->adapter, msg + 1, 1); - } - - return 0; -} - -static const struct i2c_device_id cpld_reg_ids[] = { - { "cpld_reg0", 0, }, - { }, -}; - -static struct i2c_driver dm6467evm_cpld_driver = { - .driver.name = "cpld_reg0", - .id_table = cpld_reg_ids, - .probe_new = cpld_reg0_probe, -}; - -/* LEDS */ - -static struct gpio_led evm_leds[] = { - { .name = "DS1", .active_low = 1, }, - { .name = "DS2", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int evm_led_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, &evm_led_data, - sizeof(evm_led_data)); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int evm_led_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; - -static int evm_sw_setup(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - int status; - int i; - char label[10]; - - for (i = 0; i < 4; ++i) { - snprintf(label, 10, "user_sw%d", i); - status = gpio_request(gpio, label); - if (status) - goto out_free; - evm_sw_gpio[i] = gpio++; - - status = gpio_direction_input(evm_sw_gpio[i]); - if (status) - goto out_free; - - status = gpio_export(evm_sw_gpio[i], 0); - if (status) - goto out_free; - } - return 0; - -out_free: - for (i = 0; i < 4; ++i) { - if (evm_sw_gpio[i] != -EINVAL) { - gpio_free(evm_sw_gpio[i]); - evm_sw_gpio[i] = -EINVAL; - } - } - return status; -} - -static int evm_sw_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - int i; - - for (i = 0; i < 4; ++i) { - if (evm_sw_gpio[i] != -EINVAL) { - gpio_unexport(evm_sw_gpio[i]); - gpio_free(evm_sw_gpio[i]); - evm_sw_gpio[i] = -EINVAL; - } - } - return 0; -} - -static int evm_pcf_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - int status; - - if (ngpio < 8) - return -EINVAL; - - status = evm_sw_setup(client, gpio, 4, c); - if (status) - return status; - - return evm_led_setup(client, gpio+4, 4, c); -} - -static int evm_pcf_teardown(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - BUG_ON(ngpio < 8); - - evm_sw_teardown(client, gpio, 4, c); - evm_led_teardown(client, gpio+4, 4, c); - - return 0; -} - -static struct pcf857x_platform_data pcf_data = { - .gpio_base = DAVINCI_N_GPIO+1, - .setup = evm_pcf_setup, - .teardown = evm_pcf_teardown, -}; - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - ... newer boards may have more - */ - -static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x7f00, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = dm646x_evm_nvmem_cells, - .ncells = ARRAY_SIZE(dm646x_evm_nvmem_cells), -}; - -static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 64), - { } -}; - -static const struct software_node eeprom_node = { - .properties = eeprom_properties, -}; -#endif - -static u8 dm646x_iis_serializer_direction[] = { - TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, -}; - -static u8 dm646x_dit_serializer_direction[] = { - TX_MODE, -}; - -static struct snd_platform_data dm646x_evm_snd_data[] = { - { - .tx_dma_offset = 0x400, - .rx_dma_offset = 0x400, - .op_mode = DAVINCI_MCASP_IIS_MODE, - .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), - .tdm_slots = 2, - .serial_dir = dm646x_iis_serializer_direction, - .asp_chan_q = EVENTQ_0, - }, - { - .tx_dma_offset = 0x400, - .rx_dma_offset = 0, - .op_mode = DAVINCI_MCASP_DIT_MODE, - .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), - .tdm_slots = 32, - .serial_dir = dm646x_dit_serializer_direction, - .asp_chan_q = EVENTQ_0, - }, -}; - -#ifdef CONFIG_I2C -static struct i2c_client *cpld_client; - -static int cpld_video_probe(struct i2c_client *client) -{ - cpld_client = client; - return 0; -} - -static int cpld_video_remove(struct i2c_client *client) -{ - cpld_client = NULL; - return 0; -} - -static const struct i2c_device_id cpld_video_id[] = { - { "cpld_video", 0 }, - { } -}; - -static struct i2c_driver cpld_video_driver = { - .driver = { - .name = "cpld_video", - }, - .probe_new = cpld_video_probe, - .remove = cpld_video_remove, - .id_table = cpld_video_id, -}; - -static void evm_init_cpld(void) -{ - i2c_add_driver(&cpld_video_driver); -} - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .swnode = &eeprom_node, - }, - { - I2C_BOARD_INFO("pcf8574a", 0x38), - .platform_data = &pcf_data, - }, - { - I2C_BOARD_INFO("cpld_reg0", 0x3a), - }, - { - I2C_BOARD_INFO("tlv320aic33", 0x18), - }, - { - I2C_BOARD_INFO("cpld_video", 0x3b), - }, -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 100 /* kHz */, - .bus_delay = 0 /* usec */, -}; - -#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) -#define VCH2CLK_SYSCLK8 (BIT(9)) -#define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) -#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12)) -#define VCH3CLK_SYSCLK8 (BIT(13)) -#define VCH3CLK_AUXCLK (BIT(14) | BIT(13)) - -#define VIDCH2CLK (BIT(10)) -#define VIDCH3CLK (BIT(11)) -#define VIDCH1CLK (BIT(4)) -#define TVP7002_INPUT (BIT(4)) -#define TVP5147_INPUT (~BIT(4)) -#define VPIF_INPUT_ONE_CHANNEL (BIT(5)) -#define VPIF_INPUT_TWO_CHANNEL (~BIT(5)) -#define TVP5147_CH0 "tvp514x-0" -#define TVP5147_CH1 "tvp514x-1" - -/* spin lock for updating above registers */ -static spinlock_t vpif_reg_lock; - -static int set_vpif_clock(int mux_mode, int hd) -{ - unsigned long flags; - unsigned int value; - int val = 0; - int err = 0; - - if (!cpld_client) - return -ENXIO; - - /* disable the clock */ - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - value |= (VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - if (mux_mode == 1) - val &= ~0x40; - else - val |= 0x40; - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - value &= ~(VCH2CLK_MASK); - value &= ~(VCH3CLK_MASK); - - if (hd >= 1) - value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8); - else - value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK); - - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - /* enable the clock */ - value &= ~(VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - return 0; -} - -static struct vpif_subdev_info dm646x_vpif_subdev[] = { - { - .name = "adv7343", - .board_info = { - I2C_BOARD_INFO("adv7343", 0x2a), - }, - }, - { - .name = "ths7303", - .board_info = { - I2C_BOARD_INFO("ths7303", 0x2c), - }, - }, -}; - -static const struct vpif_output dm6467_ch0_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_COMPOSITE_ID, - }, - { - .output = { - .index = 1, - .name = "Component", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_DV_TIMINGS, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_COMPONENT_ID, - }, - { - .output = { - .index = 2, - .name = "S-Video", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_SVIDEO_ID, - }, -}; - -static struct vpif_display_config dm646x_vpif_display_config = { - .set_clock = set_vpif_clock, - .subdevinfo = dm646x_vpif_subdev, - .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), - .i2c_adapter_id = 1, - .chan_config[0] = { - .outputs = dm6467_ch0_outputs, - .output_count = ARRAY_SIZE(dm6467_ch0_outputs), - }, - .card_name = "DM646x EVM Video Display", -}; - -/** - * setup_vpif_input_path() - * @channel: channel id (0 - CH0, 1 - CH1) - * @sub_dev_name: ptr sub device name - * - * This will set vpif input to capture data from tvp514x or - * tvp7002. - */ -static int setup_vpif_input_path(int channel, const char *sub_dev_name) -{ - int err = 0; - int val; - - /* for channel 1, we don't do anything */ - if (channel != 0) - return 0; - - if (!cpld_client) - return -ENXIO; - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - if (!strcmp(sub_dev_name, TVP5147_CH0) || - !strcmp(sub_dev_name, TVP5147_CH1)) - val &= TVP5147_INPUT; - else - val |= TVP7002_INPUT; - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - return 0; -} - -/** - * setup_vpif_input_channel_mode() - * @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel - * - * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147) - */ -static int setup_vpif_input_channel_mode(int mux_mode) -{ - unsigned long flags; - int err = 0; - int val; - u32 value; - - if (!cpld_client) - return -ENXIO; - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - if (mux_mode) { - val &= VPIF_INPUT_TWO_CHANNEL; - value |= VIDCH1CLK; - } else { - val |= VPIF_INPUT_ONE_CHANNEL; - value &= ~VIDCH1CLK; - } - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - - return 0; -} - -static struct tvp514x_platform_data tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1 -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -static struct vpif_subdev_info vpif_capture_sdev_info[] = { - { - .name = TVP5147_CH0, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, - }, - }, - { - .name = TVP5147_CH1, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5c), - .platform_data = &tvp5146_pdata, - }, - }, -}; - -static struct vpif_input dm6467_ch0_inputs[] = { - { - .input = { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .subdev_name = TVP5147_CH0, - .input_route = INPUT_CVBS_VI2B, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpif_input dm6467_ch1_inputs[] = { - { - .input = { - .index = 0, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .subdev_name = TVP5147_CH1, - .input_route = INPUT_SVIDEO_VI2C_VI1C, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpif_capture_config dm646x_vpif_capture_cfg = { - .setup_input_path = setup_vpif_input_path, - .setup_input_channel_mode = setup_vpif_input_channel_mode, - .subdev_info = vpif_capture_sdev_info, - .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info), - .i2c_adapter_id = 1, - .chan_config[0] = { - .inputs = dm6467_ch0_inputs, - .input_count = ARRAY_SIZE(dm6467_ch0_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .chan_config[1] = { - .inputs = dm6467_ch1_inputs, - .input_count = ARRAY_SIZE(dm6467_ch1_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .card_name = "DM646x EVM Video Capture", -}; - -static void __init evm_init_video(void) -{ - spin_lock_init(&vpif_reg_lock); - - dm646x_setup_vpif(&dm646x_vpif_display_config, - &dm646x_vpif_capture_cfg); -} - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_add_driver(&dm6467evm_cpld_driver); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); - evm_init_cpld(); - evm_init_video(); -} -#endif - -#define DM646X_REF_FREQ 27000000 -#define DM646X_AUX_FREQ 24000000 -#define DM6467T_EVM_REF_FREQ 33000000 - -static void __init davinci_map_io(void) -{ - dm646x_init(); -} - -static void __init dm646x_evm_init_time(void) -{ - dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ); -} - -static void __init dm6467t_evm_init_time(void) -{ - dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ); -} - -#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" -/* - * The following EDMA channels/slots are not being used by drivers (for - * example: Timer, GPIO, UART events etc) on dm646x, hence they are being - * reserved for codecs on the DSP side. - */ -static const s16 dm646x_dma_rsv_chans[][2] = { - /* (offset, number) */ - { 0, 4}, - {13, 3}, - {24, 4}, - {30, 2}, - {54, 3}, - {-1, -1} -}; - -static const s16 dm646x_dma_rsv_slots[][2] = { - /* (offset, number) */ - { 0, 4}, - {13, 3}, - {24, 4}, - {30, 2}, - {54, 3}, - {128, 384}, - {-1, -1} -}; - -static struct edma_rsv_info dm646x_edma_rsv[] = { - { - .rsv_chans = dm646x_dma_rsv_chans, - .rsv_slots = dm646x_dma_rsv_slots, - }, -}; - -static __init void evm_init(void) -{ - int ret; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - dm646x_register_clocks(); - - ret = dm646x_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - -#ifdef CONFIG_I2C - nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table); - nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1); - evm_init_i2c(); -#endif - - davinci_serial_init(dm646x_serial_device); - dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); - dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); - - if (machine_is_davinci_dm6467tevm()) - davinci_nand_data.timing = &dm6467tevm_nandflash_timing; - - if (platform_device_register(&davinci_aemif_device)) - pr_warn("%s: Cannot register AEMIF device.\n", __func__); - - dm646x_init_edma(dm646x_edma_rsv); - - if (HAS_ATA) - davinci_init_ide(); - - soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; -} - -MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .atag_offset = 0x100, - .map_io = davinci_map_io, - .init_irq = dm646x_init_irq, - .init_time = dm646x_evm_init_time, - .init_machine = evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END - -MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .atag_offset = 0x100, - .map_io = davinci_map_io, - .init_irq = dm646x_init_irq, - .init_time = dm6467t_evm_init_time, - .init_machine = evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END - |