diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-davinci/board-tnetv107x-evm.c | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index a6db85460227..1a656e882262 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -37,6 +38,7 @@ #define EVM_MMC_WP_GPIO 21 #define EVM_MMC_CD_GPIO 24 +#define EVM_SPI_CS_GPIO 54 static int initialize_gpio(int gpio, char *desc) { @@ -99,6 +101,12 @@ static const short uart1_pins[] __initdata = { -1 }; +static const short ssp_pins[] __initdata = { + TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, + TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, + TNETV107X_SSP1_3, -1 +}; + static struct mtd_partition nand_partitions[] = { /* bootloader (U-Boot, etc) in first 12 sectors */ { @@ -196,19 +204,68 @@ static struct matrix_keypad_platform_data keypad_config = { .no_autorepeat = 0, }; +static void spi_select_device(int cs) +{ + static int gpio; + + if (!gpio) { + int ret; + ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel"); + if (ret < 0) { + pr_err("cannot open spi chipsel gpio\n"); + gpio = -ENOSYS; + return; + } else { + gpio = EVM_SPI_CS_GPIO; + gpio_direction_output(gpio, 0); + } + } + + if (gpio < 0) + return; + + return gpio_set_value(gpio, cs ? 1 : 0); +} + +static struct ti_ssp_spi_data spi_master_data = { + .num_cs = 2, + .select = spi_select_device, + .iosel = SSP_PIN_SEL(0, SSP_CLOCK) | SSP_PIN_SEL(1, SSP_DATA) | + SSP_PIN_SEL(2, SSP_CHIPSEL) | SSP_PIN_SEL(3, SSP_IN) | + SSP_INPUT_SEL(3), +}; + +static struct ti_ssp_data ssp_config = { + .out_clock = 250 * 1000, + .dev_data = { + [1] = { + .dev_name = "ti-ssp-spi", + .pdata = &spi_master_data, + .pdata_size = sizeof(spi_master_data), + }, + }, +}; + static struct tnetv107x_device_info evm_device_info __initconst = { .serial_config = &serial_config, .mmc_config[1] = &mmc_config, /* controller 1 */ .nand_config[0] = &nand_config, /* chip select 0 */ .keypad_config = &keypad_config, + .ssp_config = &ssp_config, +}; + +static struct spi_board_info spi_info[] __initconst = { }; static __init void tnetv107x_evm_board_init(void) { davinci_cfg_reg_list(sdio1_pins); davinci_cfg_reg_list(uart1_pins); + davinci_cfg_reg_list(ssp_pins); tnetv107x_devices_init(&evm_device_info); + + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); } #ifdef CONFIG_SERIAL_8250_CONSOLE |